1/*
2 * BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges)
3 *
4 * Copyright 2011-2012 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *       notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *       notice, this list of conditions and the following disclaimer in the
12 *       documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *       names of its contributors may be used to endorse or promote products
15 *       derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35&board_ifc {
36
37	nand@0,0 {
38		#address-cells = <1>;
39		#size-cells = <1>;
40		compatible = "fsl,ifc-nand";
41		reg = <0x0 0x0 0x4000>;
42
43	};
44};
45
46&board_soc {
47	/* BSC9131RDB does not have any device on i2c@3100 */
48	i2c@3100 {
49		status = "disabled";
50	};
51
52	spi@7000 {
53		flash@0 {
54			#address-cells = <1>;
55			#size-cells = <1>;
56			compatible = "spansion,s25sl12801", "jedec,spi-nor";
57			reg = <0>;
58			spi-max-frequency = <50000000>;
59
60		};
61	};
62
63	usb@22000 {
64		phy_type = "ulpi";
65	};
66
67	mdio@24000 {
68		phy0: ethernet-phy@0 {
69			interrupts = <3 1 0 0>;
70			reg = <0x0>;
71		};
72
73		phy1: ethernet-phy@1 {
74			interrupts = <2 1 0 0>;
75			reg = <0x3>;
76		};
77	};
78
79	sdhc@2e000 {
80		status = "disabled";
81	};
82
83	ptp_clock@b0e00 {
84		compatible = "fsl,etsec-ptp";
85		reg = <0xb0e00 0xb0>;
86		interrupts = <68 2 0 0 69 2 0 0>;
87		fsl,tclk-period	= <5>;
88		fsl,tmr-prsc	= <2>;
89		fsl,tmr-add	= <0xcccccccd>;
90		fsl,tmr-fiper1	= <999999995>;
91		fsl,tmr-fiper2	= <99990>;
92		fsl,max-adj	= <249999999>;
93	};
94
95	enet0: ethernet@b0000 {
96		phy-handle = <&phy0>;
97		phy-connection-type = "rgmii-id";
98	};
99
100	enet1: ethernet@b1000 {
101		phy-handle = <&phy1>;
102		phy-connection-type = "rgmii-id";
103	};
104};
105