1// SPDX-License-Identifier: GPL-2.0-only OR MIT 2/* 3 * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/phy/phy.h> 9#include <dt-bindings/leds/common.h> 10#include <dt-bindings/gpio/gpio.h> 11#include <dt-bindings/net/ti-dp83867.h> 12#include "k3-am642.dtsi" 13 14#include "k3-serdes.h" 15 16/ { 17 compatible = "ti,am642-evm", "ti,am642"; 18 model = "Texas Instruments AM642 EVM"; 19 20 chosen { 21 stdout-path = &main_uart0; 22 }; 23 24 aliases { 25 serial0 = &mcu_uart0; 26 serial1 = &main_uart1; 27 serial2 = &main_uart0; 28 serial3 = &main_uart3; 29 i2c0 = &main_i2c0; 30 i2c1 = &main_i2c1; 31 mmc0 = &sdhci0; 32 mmc1 = &sdhci1; 33 ethernet0 = &cpsw_port1; 34 ethernet1 = &cpsw_port2; 35 ethernet2 = &icssg1_emac0; 36 }; 37 38 memory@80000000 { 39 bootph-all; 40 device_type = "memory"; 41 /* 2G RAM */ 42 reg = <0x00000000 0x80000000 0x00000000 0x80000000>; 43 }; 44 45 reserved-memory { 46 #address-cells = <2>; 47 #size-cells = <2>; 48 ranges; 49 50 secure_ddr: optee@9e800000 { 51 reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ 52 alignment = <0x1000>; 53 no-map; 54 }; 55 56 main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { 57 compatible = "shared-dma-pool"; 58 reg = <0x00 0xa0000000 0x00 0x100000>; 59 no-map; 60 }; 61 62 main_r5fss0_core0_memory_region: r5f-memory@a0100000 { 63 compatible = "shared-dma-pool"; 64 reg = <0x00 0xa0100000 0x00 0xf00000>; 65 no-map; 66 }; 67 68 main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { 69 compatible = "shared-dma-pool"; 70 reg = <0x00 0xa1000000 0x00 0x100000>; 71 no-map; 72 }; 73 74 main_r5fss0_core1_memory_region: r5f-memory@a1100000 { 75 compatible = "shared-dma-pool"; 76 reg = <0x00 0xa1100000 0x00 0xf00000>; 77 no-map; 78 }; 79 80 main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { 81 compatible = "shared-dma-pool"; 82 reg = <0x00 0xa2000000 0x00 0x100000>; 83 no-map; 84 }; 85 86 main_r5fss1_core0_memory_region: r5f-memory@a2100000 { 87 compatible = "shared-dma-pool"; 88 reg = <0x00 0xa2100000 0x00 0xf00000>; 89 no-map; 90 }; 91 92 main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { 93 compatible = "shared-dma-pool"; 94 reg = <0x00 0xa3000000 0x00 0x100000>; 95 no-map; 96 }; 97 98 main_r5fss1_core1_memory_region: r5f-memory@a3100000 { 99 compatible = "shared-dma-pool"; 100 reg = <0x00 0xa3100000 0x00 0xf00000>; 101 no-map; 102 }; 103 104 rtos_ipc_memory_region: ipc-memories@a5000000 { 105 reg = <0x00 0xa5000000 0x00 0x00800000>; 106 alignment = <0x1000>; 107 no-map; 108 }; 109 }; 110 111 evm_12v0: regulator-0 { 112 /* main DC jack */ 113 bootph-all; 114 compatible = "regulator-fixed"; 115 regulator-name = "evm_12v0"; 116 regulator-min-microvolt = <12000000>; 117 regulator-max-microvolt = <12000000>; 118 regulator-always-on; 119 regulator-boot-on; 120 }; 121 122 vsys_5v0: regulator-1 { 123 /* output of LM5140 */ 124 compatible = "regulator-fixed"; 125 regulator-name = "vsys_5v0"; 126 regulator-min-microvolt = <5000000>; 127 regulator-max-microvolt = <5000000>; 128 vin-supply = <&evm_12v0>; 129 regulator-always-on; 130 regulator-boot-on; 131 }; 132 133 vsys_3v3: regulator-2 { 134 /* output of LM5140 */ 135 bootph-all; 136 compatible = "regulator-fixed"; 137 regulator-name = "vsys_3v3"; 138 regulator-min-microvolt = <3300000>; 139 regulator-max-microvolt = <3300000>; 140 vin-supply = <&evm_12v0>; 141 regulator-always-on; 142 regulator-boot-on; 143 }; 144 145 vdd_mmc1: regulator-3 { 146 /* TPS2051BD */ 147 bootph-all; 148 compatible = "regulator-fixed"; 149 regulator-name = "vdd_mmc1"; 150 regulator-min-microvolt = <3300000>; 151 regulator-max-microvolt = <3300000>; 152 regulator-boot-on; 153 enable-active-high; 154 vin-supply = <&vsys_3v3>; 155 gpio = <&exp1 6 GPIO_ACTIVE_HIGH>; 156 }; 157 158 vddb: regulator-4 { 159 compatible = "regulator-fixed"; 160 regulator-name = "vddb_3v3_display"; 161 regulator-min-microvolt = <3300000>; 162 regulator-max-microvolt = <3300000>; 163 vin-supply = <&vsys_3v3>; 164 regulator-always-on; 165 regulator-boot-on; 166 }; 167 168 vtt_supply: regulator-5 { 169 bootph-all; 170 compatible = "regulator-fixed"; 171 regulator-name = "vtt"; 172 pinctrl-names = "default"; 173 pinctrl-0 = <&ddr_vtt_pins_default>; 174 regulator-min-microvolt = <3300000>; 175 regulator-max-microvolt = <3300000>; 176 gpio = <&main_gpio0 12 GPIO_ACTIVE_HIGH>; 177 vin-supply = <&vsys_3v3>; 178 enable-active-high; 179 regulator-always-on; 180 regulator-boot-on; 181 }; 182 183 leds { 184 compatible = "gpio-leds"; 185 186 led-0 { 187 label = "am64-evm:red:heartbeat"; 188 gpios = <&exp1 16 GPIO_ACTIVE_HIGH>; 189 linux,default-trigger = "heartbeat"; 190 function = LED_FUNCTION_HEARTBEAT; 191 default-state = "off"; 192 }; 193 }; 194 195 mdio_mux: mux-controller { 196 compatible = "gpio-mux"; 197 #mux-control-cells = <0>; 198 199 mux-gpios = <&exp1 12 GPIO_ACTIVE_HIGH>; 200 }; 201 202 mdio_mux_1: mdio-mux-1 { 203 compatible = "mdio-mux-multiplexer"; 204 mux-controls = <&mdio_mux>; 205 mdio-parent-bus = <&cpsw3g_mdio>; 206 #address-cells = <1>; 207 #size-cells = <0>; 208 209 mdio@1 { 210 reg = <0x1>; 211 #address-cells = <1>; 212 #size-cells = <0>; 213 214 cpsw3g_phy3: ethernet-phy@3 { 215 reg = <3>; 216 }; 217 }; 218 }; 219 220 transceiver1: can-phy0 { 221 compatible = "ti,tcan1042"; 222 #phy-cells = <0>; 223 max-bitrate = <5000000>; 224 standby-gpios = <&exp1 8 GPIO_ACTIVE_HIGH>; 225 }; 226 227 transceiver2: can-phy1 { 228 compatible = "ti,tcan1042"; 229 #phy-cells = <0>; 230 max-bitrate = <5000000>; 231 standby-gpios = <&exp1 9 GPIO_ACTIVE_HIGH>; 232 }; 233 234 icssg1_eth: icssg1-eth { 235 compatible = "ti,am642-icssg-prueth"; 236 pinctrl-names = "default"; 237 pinctrl-0 = <&icssg1_rgmii1_pins_default>; 238 sram = <&oc_sram>; 239 ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>; 240 firmware-name = "ti-pruss/am64x-sr2-pru0-prueth-fw.elf", 241 "ti-pruss/am64x-sr2-rtu0-prueth-fw.elf", 242 "ti-pruss/am64x-sr2-txpru0-prueth-fw.elf", 243 "ti-pruss/am64x-sr2-pru1-prueth-fw.elf", 244 "ti-pruss/am64x-sr2-rtu1-prueth-fw.elf", 245 "ti-pruss/am64x-sr2-txpru1-prueth-fw.elf"; 246 247 ti,pruss-gp-mux-sel = <2>, /* MII mode */ 248 <2>, 249 <2>, 250 <2>, /* MII mode */ 251 <2>, 252 <2>; 253 ti,mii-g-rt = <&icssg1_mii_g_rt>; 254 ti,mii-rt = <&icssg1_mii_rt>; 255 ti,iep = <&icssg1_iep0>, <&icssg1_iep1>; 256 interrupt-parent = <&icssg1_intc>; 257 interrupts = <24 0 2>, <25 1 3>; 258 interrupt-names = "tx_ts0", "tx_ts1"; 259 dmas = <&main_pktdma 0xc200 15>, /* egress slice 0 */ 260 <&main_pktdma 0xc201 15>, /* egress slice 0 */ 261 <&main_pktdma 0xc202 15>, /* egress slice 0 */ 262 <&main_pktdma 0xc203 15>, /* egress slice 0 */ 263 <&main_pktdma 0xc204 15>, /* egress slice 1 */ 264 <&main_pktdma 0xc205 15>, /* egress slice 1 */ 265 <&main_pktdma 0xc206 15>, /* egress slice 1 */ 266 <&main_pktdma 0xc207 15>, /* egress slice 1 */ 267 <&main_pktdma 0x4200 15>, /* ingress slice 0 */ 268 <&main_pktdma 0x4201 15>; /* ingress slice 1 */ 269 dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", 270 "tx1-0", "tx1-1", "tx1-2", "tx1-3", 271 "rx0", "rx1"; 272 273 ethernet-ports { 274 #address-cells = <1>; 275 #size-cells = <0>; 276 icssg1_emac0: port@0 { 277 reg = <0>; 278 phy-handle = <&icssg1_phy1>; 279 phy-mode = "rgmii-id"; 280 /* Filled in by bootloader */ 281 local-mac-address = [00 00 00 00 00 00]; 282 }; 283 icssg1_emac1: port@1 { 284 reg = <1>; 285 /* Filled in by bootloader */ 286 local-mac-address = [00 00 00 00 00 00]; 287 status = "disabled"; 288 }; 289 }; 290 }; 291}; 292 293&main_pmx0 { 294 main_mmc1_pins_default: main-mmc1-default-pins { 295 pinctrl-single,pins = < 296 AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ 297 AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ 298 AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */ 299 AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */ 300 AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */ 301 AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ 302 AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ 303 AM64X_IOPAD(0x029c, PIN_INPUT, 0) /* (C20) MMC1_SDWP */ 304 AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB */ 305 >; 306 }; 307 308 main_uart1_pins_default: main-uart1-default-pins { 309 pinctrl-single,pins = < 310 AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ 311 AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ 312 AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */ 313 AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ 314 >; 315 }; 316 317 main_uart0_pins_default: main-uart0-default-pins { 318 bootph-all; 319 pinctrl-single,pins = < 320 AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ 321 AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ 322 AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ 323 AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ 324 >; 325 }; 326 327 main_spi0_pins_default: main-spi0-default-pins { 328 pinctrl-single,pins = < 329 AM64X_IOPAD(0x0210, PIN_INPUT, 0) /* (D13) SPI0_CLK */ 330 AM64X_IOPAD(0x0208, PIN_OUTPUT, 0) /* (D12) SPI0_CS0 */ 331 AM64X_IOPAD(0x0214, PIN_OUTPUT, 0) /* (A13) SPI0_D0 */ 332 AM64X_IOPAD(0x0218, PIN_INPUT, 0) /* (A14) SPI0_D1 */ 333 >; 334 }; 335 336 main_i2c0_pins_default: main-i2c0-default-pins { 337 bootph-all; 338 pinctrl-single,pins = < 339 AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ 340 AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ 341 >; 342 }; 343 344 main_i2c1_pins_default: main-i2c1-default-pins { 345 bootph-all; 346 pinctrl-single,pins = < 347 AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ 348 AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ 349 >; 350 }; 351 352 mdio1_pins_default: mdio1-default-pins { 353 bootph-all; 354 pinctrl-single,pins = < 355 AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ 356 AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ 357 >; 358 }; 359 360 rgmii1_pins_default: rgmii1-default-pins { 361 bootph-all; 362 pinctrl-single,pins = < 363 AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */ 364 AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */ 365 AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */ 366 AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */ 367 AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */ 368 AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */ 369 AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */ 370 AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */ 371 AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */ 372 AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */ 373 AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */ 374 AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */ 375 >; 376 }; 377 378 rgmii2_pins_default: rgmii2-default-pins { 379 bootph-all; 380 pinctrl-single,pins = < 381 AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ 382 AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ 383 AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */ 384 AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */ 385 AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */ 386 AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */ 387 AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */ 388 AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */ 389 AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */ 390 AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */ 391 AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */ 392 AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */ 393 >; 394 }; 395 396 main_usb0_pins_default: main-usb0-default-pins { 397 bootph-all; 398 pinctrl-single,pins = < 399 AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ 400 >; 401 }; 402 403 ospi0_pins_default: ospi0-default-pins { 404 pinctrl-single,pins = < 405 AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ 406 AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ 407 AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */ 408 AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */ 409 AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */ 410 AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */ 411 AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */ 412 AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */ 413 AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */ 414 AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */ 415 AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ 416 >; 417 }; 418 419 main_ecap0_pins_default: main-ecap0-default-pins { 420 pinctrl-single,pins = < 421 AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ 422 >; 423 }; 424 425 main_mcan0_pins_default: main-mcan0-default-pins { 426 pinctrl-single,pins = < 427 AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */ 428 AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */ 429 >; 430 }; 431 432 main_mcan1_pins_default: main-mcan1-default-pins { 433 pinctrl-single,pins = < 434 AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */ 435 AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */ 436 >; 437 }; 438 439 ddr_vtt_pins_default: ddr-vtt-default-pins { 440 bootph-all; 441 pinctrl-single,pins = < 442 AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */ 443 >; 444 }; 445 446 icssg1_mdio1_pins_default: icssg1-mdio1-default-pins { 447 pinctrl-single,pins = < 448 AM64X_IOPAD(0x015c, PIN_OUTPUT, 0) /* (Y6) PRG1_MDIO0_MDC */ 449 AM64X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA6) PRG1_MDIO0_MDIO */ 450 >; 451 }; 452 453 icssg1_rgmii1_pins_default: icssg1-rgmii1-default-pins{ 454 pinctrl-single,pins = < 455 AM64X_IOPAD(0x00b8, PIN_INPUT, 2) /* (Y7) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */ 456 AM64X_IOPAD(0x00bc, PIN_INPUT, 2) /* (U8) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */ 457 AM64X_IOPAD(0x00c0, PIN_INPUT, 2) /* (W8) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */ 458 AM64X_IOPAD(0x00c4, PIN_INPUT, 2) /* (V8) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */ 459 AM64X_IOPAD(0x00d0, PIN_INPUT, 2) /* (AA7) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */ 460 AM64X_IOPAD(0x00c8, PIN_INPUT, 2) /* (Y8) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */ 461 AM64X_IOPAD(0x00e4, PIN_INPUT, 2) /* (AA8) PRG1_PRU0_GPO11.PRG1_RGMII1_TD0 */ 462 AM64X_IOPAD(0x00e8, PIN_INPUT, 2) /* (U9) PRG1_PRU0_GPO12.PRG1_RGMII1_TD1 */ 463 AM64X_IOPAD(0x00ec, PIN_INPUT, 2) /* (W9) PRG1_PRU0_GPO13.PRG1_RGMII1_TD2 */ 464 AM64X_IOPAD(0x00f0, PIN_INPUT, 2) /* (AA9) PRG1_PRU0_GPO14.PRG1_RGMII1_TD3 */ 465 AM64X_IOPAD(0x00f8, PIN_INPUT, 2) /* (V9) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */ 466 AM64X_IOPAD(0x00f4, PIN_INPUT, 2) /* (Y9) PRG1_PRU0_GPO15.PRG1_RGMII1_TX_CTL */ 467 >; 468 }; 469}; 470 471&main_uart0 { 472 bootph-all; 473 status = "okay"; 474 pinctrl-names = "default"; 475 pinctrl-0 = <&main_uart0_pins_default>; 476}; 477 478/* main_uart1 is reserved for firmware usage */ 479&main_uart1 { 480 status = "reserved"; 481 pinctrl-names = "default"; 482 pinctrl-0 = <&main_uart1_pins_default>; 483}; 484 485&main_i2c0 { 486 bootph-all; 487 status = "okay"; 488 pinctrl-names = "default"; 489 pinctrl-0 = <&main_i2c0_pins_default>; 490 clock-frequency = <400000>; 491 492 gpio@38 { 493 /* TCA9554 */ 494 compatible = "nxp,pca9554"; 495 reg = <0x38>; 496 gpio-controller; 497 #gpio-cells = <2>; 498 gpio-line-names = "HSE_DETECT"; 499 }; 500 501 eeprom@50 { 502 /* AT24CM01 */ 503 compatible = "atmel,24c1024"; 504 reg = <0x50>; 505 }; 506}; 507 508&main_i2c1 { 509 bootph-all; 510 status = "okay"; 511 pinctrl-names = "default"; 512 pinctrl-0 = <&main_i2c1_pins_default>; 513 clock-frequency = <400000>; 514 515 exp1: gpio@22 { 516 bootph-all; 517 compatible = "ti,tca6424"; 518 reg = <0x22>; 519 gpio-controller; 520 #gpio-cells = <2>; 521 gpio-line-names = "GPIO_eMMC_RSTn", "CAN_MUX_SEL", 522 "GPIO_CPSW1_RST", "GPIO_RGMII1_RST", 523 "GPIO_RGMII2_RST", "GPIO_PCIe_RST_OUT", 524 "MMC1_SD_EN", "FSI_FET_SEL", 525 "MCAN0_STB_3V3", "MCAN1_STB_3V3", 526 "CPSW_FET_SEL", "CPSW_FET2_SEL", 527 "PRG1_RGMII2_FET_SEL", "TEST_GPIO2", 528 "GPIO_OLED_RESETn", "VPP_LDO_EN", 529 "TEST_LED1", "TP92", "TP90", "TP88", 530 "TP87", "TP86", "TP89", "TP91"; 531 }; 532 533 /* osd9616p0899-10 */ 534 display@3c { 535 compatible = "solomon,ssd1306fb-i2c"; 536 reg = <0x3c>; 537 reset-gpios = <&exp1 14 GPIO_ACTIVE_LOW>; 538 vbat-supply = <&vddb>; 539 solomon,height = <16>; 540 solomon,width = <96>; 541 solomon,com-seq; 542 solomon,com-invdir; 543 solomon,page-offset = <0>; 544 solomon,prechargep1 = <2>; 545 solomon,prechargep2 = <13>; 546 }; 547}; 548 549&main_gpio0 { 550 bootph-all; 551}; 552 553/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */ 554&mcu_gpio0 { 555 status = "reserved"; 556}; 557 558&mcu_gpio_intr { 559 status = "reserved"; 560}; 561 562&main_spi0 { 563 status = "okay"; 564 pinctrl-names = "default"; 565 pinctrl-0 = <&main_spi0_pins_default>; 566 ti,pindir-d0-out-d1-in; 567 eeprom@0 { 568 compatible = "microchip,93lc46b"; 569 reg = <0>; 570 spi-max-frequency = <1000000>; 571 spi-cs-high; 572 data-size = <16>; 573 }; 574}; 575 576/* eMMC */ 577&sdhci0 { 578 status = "okay"; 579 non-removable; 580 ti,driver-strength-ohm = <50>; 581 disable-wp; 582 bootph-all; 583}; 584 585/* SD/MMC */ 586&sdhci1 { 587 bootph-all; 588 status = "okay"; 589 vmmc-supply = <&vdd_mmc1>; 590 pinctrl-names = "default"; 591 pinctrl-0 = <&main_mmc1_pins_default>; 592 disable-wp; 593}; 594 595&usbss0 { 596 bootph-all; 597 ti,vbus-divider; 598 ti,usb2-only; 599}; 600 601&usb0 { 602 bootph-all; 603 dr_mode = "otg"; 604 maximum-speed = "high-speed"; 605 pinctrl-names = "default"; 606 pinctrl-0 = <&main_usb0_pins_default>; 607}; 608 609&cpsw3g { 610 bootph-all; 611 pinctrl-names = "default"; 612 pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>; 613}; 614 615&cpsw_port1 { 616 bootph-all; 617 phy-mode = "rgmii-rxid"; 618 phy-handle = <&cpsw3g_phy0>; 619}; 620 621&cpsw_port2 { 622 phy-mode = "rgmii-rxid"; 623 phy-handle = <&cpsw3g_phy3>; 624}; 625 626&cpsw3g_mdio { 627 bootph-all; 628 status = "okay"; 629 pinctrl-names = "default"; 630 pinctrl-0 = <&mdio1_pins_default>; 631 632 cpsw3g_phy0: ethernet-phy@0 { 633 bootph-all; 634 reg = <0>; 635 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; 636 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; 637 }; 638}; 639 640&tscadc0 { 641 /* ADC is reserved for R5 usage */ 642 status = "reserved"; 643}; 644 645&ospi0 { 646 status = "okay"; 647 pinctrl-names = "default"; 648 pinctrl-0 = <&ospi0_pins_default>; 649 650 flash@0 { 651 compatible = "jedec,spi-nor"; 652 reg = <0x0>; 653 spi-tx-bus-width = <8>; 654 spi-rx-bus-width = <8>; 655 spi-max-frequency = <25000000>; 656 cdns,tshsl-ns = <60>; 657 cdns,tsd2d-ns = <60>; 658 cdns,tchsh-ns = <60>; 659 cdns,tslch-ns = <60>; 660 cdns,read-delay = <4>; 661 662 partitions { 663 compatible = "fixed-partitions"; 664 #address-cells = <1>; 665 #size-cells = <1>; 666 667 partition@0 { 668 label = "ospi.tiboot3"; 669 reg = <0x0 0x100000>; 670 }; 671 672 partition@100000 { 673 label = "ospi.tispl"; 674 reg = <0x100000 0x200000>; 675 }; 676 677 partition@300000 { 678 label = "ospi.u-boot"; 679 reg = <0x300000 0x400000>; 680 }; 681 682 partition@700000 { 683 label = "ospi.env"; 684 reg = <0x700000 0x40000>; 685 }; 686 687 partition@740000 { 688 label = "ospi.env.backup"; 689 reg = <0x740000 0x40000>; 690 }; 691 692 partition@800000 { 693 label = "ospi.rootfs"; 694 reg = <0x800000 0x37c0000>; 695 }; 696 697 partition@3fc0000 { 698 label = "ospi.phypattern"; 699 reg = <0x3fc0000 0x40000>; 700 }; 701 }; 702 }; 703}; 704 705&mailbox0_cluster2 { 706 status = "okay"; 707 708 mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { 709 ti,mbox-rx = <0 0 2>; 710 ti,mbox-tx = <1 0 2>; 711 }; 712 713 mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { 714 ti,mbox-rx = <2 0 2>; 715 ti,mbox-tx = <3 0 2>; 716 }; 717}; 718 719&mailbox0_cluster4 { 720 status = "okay"; 721 722 mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { 723 ti,mbox-rx = <0 0 2>; 724 ti,mbox-tx = <1 0 2>; 725 }; 726 727 mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { 728 ti,mbox-rx = <2 0 2>; 729 ti,mbox-tx = <3 0 2>; 730 }; 731}; 732 733&mailbox0_cluster6 { 734 status = "okay"; 735 736 mbox_m4_0: mbox-m4-0 { 737 ti,mbox-rx = <0 0 2>; 738 ti,mbox-tx = <1 0 2>; 739 }; 740}; 741 742&main_r5fss0_core0 { 743 mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; 744 memory-region = <&main_r5fss0_core0_dma_memory_region>, 745 <&main_r5fss0_core0_memory_region>; 746}; 747 748&main_r5fss0_core1 { 749 mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; 750 memory-region = <&main_r5fss0_core1_dma_memory_region>, 751 <&main_r5fss0_core1_memory_region>; 752}; 753 754&main_r5fss1_core0 { 755 mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; 756 memory-region = <&main_r5fss1_core0_dma_memory_region>, 757 <&main_r5fss1_core0_memory_region>; 758}; 759 760&main_r5fss1_core1 { 761 mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; 762 memory-region = <&main_r5fss1_core1_dma_memory_region>, 763 <&main_r5fss1_core1_memory_region>; 764}; 765 766&serdes_ln_ctrl { 767 idle-states = <AM64_SERDES0_LANE0_PCIE0>; 768}; 769 770&serdes0 { 771 serdes0_pcie_link: phy@0 { 772 reg = <0>; 773 cdns,num-lanes = <1>; 774 #phy-cells = <0>; 775 cdns,phy-type = <PHY_TYPE_PCIE>; 776 resets = <&serdes_wiz0 1>; 777 }; 778}; 779 780&pcie0_rc { 781 status = "okay"; 782 reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>; 783 phys = <&serdes0_pcie_link>; 784 phy-names = "pcie-phy"; 785 num-lanes = <1>; 786}; 787 788&ecap0 { 789 status = "okay"; 790 /* PWM is available on Pin 1 of header J12 */ 791 pinctrl-names = "default"; 792 pinctrl-0 = <&main_ecap0_pins_default>; 793}; 794 795&main_mcan0 { 796 status = "okay"; 797 pinctrl-names = "default"; 798 pinctrl-0 = <&main_mcan0_pins_default>; 799 phys = <&transceiver1>; 800}; 801 802&main_mcan1 { 803 status = "okay"; 804 pinctrl-names = "default"; 805 pinctrl-0 = <&main_mcan1_pins_default>; 806 phys = <&transceiver2>; 807}; 808 809&icssg1_mdio { 810 status = "okay"; 811 pinctrl-names = "default"; 812 pinctrl-0 = <&icssg1_mdio1_pins_default>; 813 814 icssg1_phy1: ethernet-phy@f { 815 reg = <0xf>; 816 tx-internal-delay-ps = <250>; 817 rx-internal-delay-ps = <2000>; 818 }; 819}; 820