1// SPDX-License-Identifier: GPL-2.0
2#include "qcom-msm8974.dtsi"
3#include "pm8841.dtsi"
4#include "pm8941.dtsi"
5#include <dt-bindings/input/input.h>
6#include <dt-bindings/leds/common.h>
7#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
8
9/ {
10	aliases {
11		serial0 = &blsp1_uart2;
12	};
13
14	chosen {
15		stdout-path = "serial0:115200n8";
16	};
17
18	gpio-keys {
19		compatible = "gpio-keys";
20
21		pinctrl-names = "default";
22		pinctrl-0 = <&gpio_keys_pin_a>;
23
24		key-volume-down {
25			label = "volume_down";
26			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
27			linux,input-type = <1>;
28			linux,code = <KEY_VOLUMEDOWN>;
29		};
30
31		key-camera-snapshot {
32			label = "camera_snapshot";
33			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
34			linux,input-type = <1>;
35			linux,code = <KEY_CAMERA>;
36		};
37
38		key-camera-focus {
39			label = "camera_focus";
40			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
41			linux,input-type = <1>;
42			linux,code = <KEY_CAMERA_FOCUS>;
43		};
44
45		key-volume-up {
46			label = "volume_up";
47			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
48			linux,input-type = <1>;
49			linux,code = <KEY_VOLUMEUP>;
50		};
51	};
52
53	reserved-memory {
54		#address-cells = <1>;
55		#size-cells = <1>;
56		ranges;
57
58		ramoops@3e8e0000 {
59			compatible = "ramoops";
60			reg = <0x3e8e0000 0x200000>;
61
62			console-size = <0x100000>;
63			record-size = <0x10000>;
64			ftrace-size = <0x10000>;
65			pmsg-size = <0x80000>;
66		};
67	};
68
69	vreg_boost: vreg-boost {
70		compatible = "regulator-fixed";
71
72		regulator-name = "vreg-boost";
73		regulator-min-microvolt = <3150000>;
74		regulator-max-microvolt = <3150000>;
75
76		regulator-always-on;
77		regulator-boot-on;
78
79		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
80		enable-active-high;
81
82		pinctrl-names = "default";
83		pinctrl-0 = <&boost_bypass_n_pin>;
84	};
85
86	vreg_vph_pwr: vreg-vph-pwr {
87		compatible = "regulator-fixed";
88		regulator-name = "vph-pwr";
89
90		regulator-min-microvolt = <3600000>;
91		regulator-max-microvolt = <3600000>;
92
93		regulator-always-on;
94	};
95};
96
97&blsp1_i2c2 {
98	status = "okay";
99	clock-frequency = <355000>;
100
101	synaptics@2c {
102		compatible = "syna,rmi4-i2c";
103		reg = <0x2c>;
104
105		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
106
107		#address-cells = <1>;
108		#size-cells = <0>;
109
110		vdd-supply = <&pm8941_l22>;
111		vio-supply = <&pm8941_lvs3>;
112
113		pinctrl-names = "default";
114		pinctrl-0 = <&ts_int_pin>;
115
116		syna,startup-delay-ms = <10>;
117
118		rmi4-f01@1 {
119			reg = <0x1>;
120			syna,nosleep-mode = <1>;
121		};
122
123		rmi4-f11@11 {
124			reg = <0x11>;
125			touchscreen-inverted-x;
126			syna,sensor-type = <1>;
127		};
128	};
129};
130
131&blsp1_i2c6 {
132	status = "okay";
133	clock-frequency = <355000>;
134
135	nfc@28 {
136		compatible = "nxp,pn544-i2c";
137		reg = <0x28>;
138
139		interrupt-parent = <&tlmm>;
140		interrupts = <59 IRQ_TYPE_EDGE_RISING>;
141
142		enable-gpios = <&pm8941_gpios 23 GPIO_ACTIVE_HIGH>;
143		firmware-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>;
144	};
145};
146
147&blsp1_uart2 {
148	status = "okay";
149};
150
151&blsp2_dma {
152	qcom,controlled-remotely;
153};
154
155&blsp2_i2c5 {
156	status = "okay";
157	clock-frequency = <355000>;
158
159	/* sii8334 MHL HDMI bridge */
160};
161
162&pm8941_coincell {
163	status = "okay";
164	qcom,rset-ohms = <2100>;
165	qcom,vset-millivolts = <3000>;
166};
167
168&pm8941_gpios {
169	gpio_keys_pin_a: gpio-keys-active-state {
170		pins = "gpio2", "gpio3", "gpio4", "gpio5";
171		function = "normal";
172
173		bias-pull-up;
174		power-source = <PM8941_GPIO_S3>;
175	};
176};
177
178&pm8941_lpg {
179	status = "okay";
180
181	qcom,power-source = <1>;
182
183	multi-led {
184		color = <LED_COLOR_ID_RGB>;
185		function = LED_FUNCTION_STATUS;
186
187		#address-cells = <1>;
188		#size-cells = <0>;
189
190		led@5 {
191			reg = <5>;
192			color = <LED_COLOR_ID_BLUE>;
193		};
194
195		led@6 {
196			reg = <6>;
197			color = <LED_COLOR_ID_GREEN>;
198		};
199
200		led@7 {
201			reg = <7>;
202			color = <LED_COLOR_ID_RED>;
203		};
204	};
205};
206
207&pm8941_wled {
208	status = "okay";
209
210	qcom,cs-out;
211	qcom,current-limit = <20>;
212	qcom,current-boost-limit = <805>;
213	qcom,switching-freq = <1600>;
214	qcom,ovp = <29>;
215	qcom,num-strings = <2>;
216};
217
218&remoteproc_adsp {
219	cx-supply = <&pm8841_s2>;
220	status = "okay";
221};
222
223&remoteproc_mss {
224	cx-supply = <&pm8841_s2>;
225	mss-supply = <&pm8841_s3>;
226	mx-supply = <&pm8841_s1>;
227	pll-supply = <&pm8941_l12>;
228	status = "okay";
229};
230
231&rpm_requests {
232	regulators-0 {
233		compatible = "qcom,rpm-pm8841-regulators";
234
235		pm8841_s1: s1 {
236			regulator-min-microvolt = <675000>;
237			regulator-max-microvolt = <1050000>;
238		};
239
240		pm8841_s2: s2 {
241			regulator-min-microvolt = <500000>;
242			regulator-max-microvolt = <1050000>;
243		};
244
245		pm8841_s3: s3 {
246			regulator-min-microvolt = <500000>;
247			regulator-max-microvolt = <1050000>;
248		};
249
250		pm8841_s4: s4 {
251			regulator-min-microvolt = <500000>;
252			regulator-max-microvolt = <1050000>;
253		};
254	};
255
256	regulators-1 {
257		compatible = "qcom,rpm-pm8941-regulators";
258
259		vdd_l1_l3-supply = <&pm8941_s1>;
260		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
261		vdd_l4_l11-supply = <&pm8941_s1>;
262		vdd_l5_l7-supply = <&pm8941_s2>;
263		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
264		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
265		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
266		vdd_l21-supply = <&vreg_boost>;
267
268		pm8941_s1: s1 {
269			regulator-min-microvolt = <1300000>;
270			regulator-max-microvolt = <1300000>;
271			regulator-always-on;
272			regulator-boot-on;
273		};
274
275		pm8941_s2: s2 {
276			regulator-min-microvolt = <2150000>;
277			regulator-max-microvolt = <2150000>;
278			regulator-boot-on;
279		};
280
281		pm8941_s3: s3 {
282			regulator-min-microvolt = <1800000>;
283			regulator-max-microvolt = <1800000>;
284			regulator-always-on;
285			regulator-boot-on;
286		};
287
288		pm8941_s4: s4 {
289			regulator-min-microvolt = <5000000>;
290			regulator-max-microvolt = <5000000>;
291		};
292
293		pm8941_l1: l1 {
294			regulator-min-microvolt = <1225000>;
295			regulator-max-microvolt = <1225000>;
296			regulator-always-on;
297			regulator-boot-on;
298		};
299
300		pm8941_l2: l2 {
301			regulator-min-microvolt = <1200000>;
302			regulator-max-microvolt = <1200000>;
303		};
304
305		pm8941_l3: l3 {
306			regulator-min-microvolt = <1200000>;
307			regulator-max-microvolt = <1200000>;
308		};
309
310		pm8941_l4: l4 {
311			regulator-min-microvolt = <1225000>;
312			regulator-max-microvolt = <1225000>;
313		};
314
315		pm8941_l5: l5 {
316			regulator-min-microvolt = <1800000>;
317			regulator-max-microvolt = <1800000>;
318		};
319
320		pm8941_l6: l6 {
321			regulator-min-microvolt = <1800000>;
322			regulator-max-microvolt = <1800000>;
323			regulator-boot-on;
324		};
325
326		pm8941_l7: l7 {
327			regulator-min-microvolt = <1800000>;
328			regulator-max-microvolt = <1800000>;
329			regulator-boot-on;
330		};
331
332		pm8941_l8: l8 {
333			regulator-min-microvolt = <1800000>;
334			regulator-max-microvolt = <1800000>;
335		};
336
337		pm8941_l9: l9 {
338			regulator-min-microvolt = <1800000>;
339			regulator-max-microvolt = <2950000>;
340		};
341
342		pm8941_l11: l11 {
343			regulator-min-microvolt = <1300000>;
344			regulator-max-microvolt = <1350000>;
345		};
346
347		pm8941_l12: l12 {
348			regulator-min-microvolt = <1800000>;
349			regulator-max-microvolt = <1800000>;
350			regulator-always-on;
351			regulator-boot-on;
352		};
353
354		pm8941_l13: l13 {
355			regulator-min-microvolt = <1800000>;
356			regulator-max-microvolt = <2950000>;
357			regulator-boot-on;
358		};
359
360		pm8941_l14: l14 {
361			regulator-min-microvolt = <1800000>;
362			regulator-max-microvolt = <1800000>;
363		};
364
365		pm8941_l15: l15 {
366			regulator-min-microvolt = <2050000>;
367			regulator-max-microvolt = <2050000>;
368		};
369
370		pm8941_l16: l16 {
371			regulator-min-microvolt = <2700000>;
372			regulator-max-microvolt = <2700000>;
373		};
374
375		pm8941_l17: l17 {
376			regulator-min-microvolt = <2700000>;
377			regulator-max-microvolt = <2700000>;
378		};
379
380		pm8941_l18: l18 {
381			regulator-min-microvolt = <2850000>;
382			regulator-max-microvolt = <2850000>;
383		};
384
385		pm8941_l19: l19 {
386			regulator-min-microvolt = <3300000>;
387			regulator-max-microvolt = <3300000>;
388		};
389
390		pm8941_l20: l20 {
391			regulator-min-microvolt = <2950000>;
392			regulator-max-microvolt = <2950000>;
393			regulator-system-load = <200000>;
394			regulator-allow-set-load;
395			regulator-boot-on;
396		};
397
398		pm8941_l21: l21 {
399			regulator-min-microvolt = <2950000>;
400			regulator-max-microvolt = <2950000>;
401			regulator-boot-on;
402		};
403
404		pm8941_l22: l22 {
405			regulator-min-microvolt = <3000000>;
406			regulator-max-microvolt = <3000000>;
407		};
408
409		pm8941_l23: l23 {
410			regulator-min-microvolt = <2800000>;
411			regulator-max-microvolt = <2800000>;
412		};
413
414		pm8941_l24: l24 {
415			regulator-min-microvolt = <3075000>;
416			regulator-max-microvolt = <3075000>;
417			regulator-boot-on;
418		};
419
420		pm8941_lvs3: lvs3 {};
421	};
422};
423
424&sdhc_1 {
425	status = "okay";
426
427	vmmc-supply = <&pm8941_l20>;
428	vqmmc-supply = <&pm8941_s3>;
429
430	pinctrl-names = "default", "sleep";
431	pinctrl-0 = <&sdc1_on>;
432	pinctrl-1 = <&sdc1_off>;
433};
434
435&sdhc_2 {
436	status = "okay";
437
438	vmmc-supply = <&pm8941_l21>;
439	vqmmc-supply = <&pm8941_l13>;
440
441	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
442
443	pinctrl-names = "default", "sleep";
444	pinctrl-0 = <&sdc2_on>;
445	pinctrl-1 = <&sdc2_off>;
446};
447
448&smbb {
449	qcom,fast-charge-safe-current = <1500000>;
450	qcom,fast-charge-current-limit = <1500000>;
451	qcom,dc-current-limit = <1800000>;
452	qcom,fast-charge-safe-voltage = <4400000>;
453	qcom,fast-charge-high-threshold-voltage = <4350000>;
454	qcom,fast-charge-low-threshold-voltage = <3400000>;
455	qcom,auto-recharge-threshold-voltage = <4200000>;
456	qcom,minimum-input-voltage = <4300000>;
457
458	status = "okay";
459};
460
461&tlmm {
462	ts_int_pin: touch-int-state {
463		pins = "gpio61";
464		function = "gpio";
465		drive-strength = <2>;
466		bias-disable;
467	};
468
469	sdc1_on: sdc1-on-state {
470		clk-pins {
471			pins = "sdc1_clk";
472			drive-strength = <16>;
473			bias-disable;
474		};
475
476		cmd-data-pins {
477			pins = "sdc1_cmd", "sdc1_data";
478			drive-strength = <10>;
479			bias-pull-up;
480		};
481	};
482
483	sdc2_on: sdc-on-state {
484		clk-pins {
485			pins = "sdc2_clk";
486			drive-strength = <10>;
487			bias-disable;
488		};
489
490		cmd-data-pins {
491			pins = "sdc2_cmd", "sdc2_data";
492			drive-strength = <6>;
493			bias-pull-up;
494		};
495
496		cd-pins {
497			pins = "gpio62";
498			function = "gpio";
499			drive-strength = <2>;
500			bias-disable;
501		};
502	};
503};
504
505&usb {
506	status = "okay";
507
508	phys = <&usb_hs1_phy>;
509	phy-select = <&tcsr 0xb000 0>;
510	extcon = <&smbb>, <&usb_id>;
511	vbus-supply = <&chg_otg>;
512
513	hnp-disable;
514	srp-disable;
515	adp-disable;
516};
517
518&usb_hs1_phy {
519	status = "okay";
520
521	v1p8-supply = <&pm8941_l6>;
522	v3p3-supply = <&pm8941_l24>;
523
524	extcon = <&smbb>;
525	qcom,init-seq = /bits/ 8 <0x1 0x64>;
526};
527