1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * NXP LPC32xx SoC
4 *
5 * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com>
6 * Copyright 2012 Roland Stigge <stigge@antcom.de>
7 */
8
9#include <dt-bindings/clock/lpc32xx-clock.h>
10#include <dt-bindings/interrupt-controller/irq.h>
11
12/ {
13	#address-cells = <1>;
14	#size-cells = <1>;
15	compatible = "nxp,lpc3220";
16	interrupt-parent = <&mic>;
17
18	cpus {
19		#address-cells = <1>;
20		#size-cells = <0>;
21
22		cpu@0 {
23			compatible = "arm,arm926ej-s";
24			device_type = "cpu";
25			reg = <0x0>;
26		};
27	};
28
29	clocks {
30		xtal_32k: xtal_32k {
31			compatible = "fixed-clock";
32			#clock-cells = <0>;
33			clock-frequency = <32768>;
34			clock-output-names = "xtal_32k";
35		};
36
37		xtal: xtal {
38			compatible = "fixed-clock";
39			#clock-cells = <0>;
40			clock-frequency = <13000000>;
41			clock-output-names = "xtal";
42		};
43	};
44
45	ahb {
46		#address-cells = <1>;
47		#size-cells = <1>;
48		compatible = "simple-bus";
49		ranges = <0x00000000 0x00000000 0x10000000>,
50			 <0x20000000 0x20000000 0x30000000>,
51			 <0xe0000000 0xe0000000 0x04000000>;
52
53		iram: sram@8000000 {
54			compatible = "mmio-sram";
55			reg = <0x08000000 0x20000>;
56
57			#address-cells = <1>;
58			#size-cells = <1>;
59			ranges = <0x00000000 0x08000000 0x20000>;
60		};
61
62		/*
63		 * Enable either SLC or MLC
64		 */
65		slc: flash@20020000 {
66			compatible = "nxp,lpc3220-slc";
67			reg = <0x20020000 0x1000>;
68			clocks = <&clk LPC32XX_CLK_SLC>;
69			status = "disabled";
70		};
71
72		mlc: flash@200a8000 {
73			compatible = "nxp,lpc3220-mlc";
74			reg = <0x200a8000 0x11000>;
75			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
76			clocks = <&clk LPC32XX_CLK_MLC>;
77			status = "disabled";
78		};
79
80		dma: dma@31000000 {
81			compatible = "arm,pl080", "arm,primecell";
82			reg = <0x31000000 0x1000>;
83			interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
84			clocks = <&clk LPC32XX_CLK_DMA>;
85			clock-names = "apb_pclk";
86		};
87
88		usb {
89			#address-cells = <1>;
90			#size-cells = <1>;
91			compatible = "simple-bus";
92			ranges = <0x0 0x31020000 0x00001000>;
93
94			/*
95			 * Enable either ohci or usbd (gadget)!
96			 */
97			ohci: ohci@0 {
98				compatible = "nxp,ohci-nxp", "usb-ohci";
99				reg = <0x0 0x300>;
100				interrupt-parent = <&sic1>;
101				interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
102				clocks = <&usbclk LPC32XX_USB_CLK_HOST>;
103				status = "disabled";
104			};
105
106			usbd: usbd@0 {
107				compatible = "nxp,lpc3220-udc";
108				reg = <0x0 0x300>;
109				interrupt-parent = <&sic1>;
110				interrupts = <29 IRQ_TYPE_LEVEL_HIGH>,
111					     <30 IRQ_TYPE_LEVEL_HIGH>,
112					     <28 IRQ_TYPE_LEVEL_HIGH>,
113					     <26 IRQ_TYPE_LEVEL_LOW>;
114				clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>;
115				status = "disabled";
116			};
117
118			i2cusb: i2c@300 {
119				compatible = "nxp,pnx-i2c";
120				reg = <0x300 0x100>;
121				interrupt-parent = <&sic1>;
122				interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
123				clocks = <&usbclk LPC32XX_USB_CLK_I2C>;
124				#address-cells = <1>;
125				#size-cells = <0>;
126			};
127
128			usbclk: clock-controller@f00 {
129				compatible = "nxp,lpc3220-usb-clk";
130				reg = <0xf00 0x100>;
131				#clock-cells = <1>;
132			};
133		};
134
135		clcd: clcd@31040000 {
136			compatible = "arm,pl111", "arm,primecell";
137			reg = <0x31040000 0x1000>;
138			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
139			clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>;
140			clock-names = "clcdclk", "apb_pclk";
141			status = "disabled";
142		};
143
144		mac: ethernet@31060000 {
145			compatible = "nxp,lpc-eth";
146			reg = <0x31060000 0x1000>;
147			interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
148			clocks = <&clk LPC32XX_CLK_MAC>;
149			status = "disabled";
150		};
151
152		emc: memory-controller@31080000 {
153			compatible = "arm,pl175", "arm,primecell";
154			reg = <0x31080000 0x1000>;
155			clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>;
156			clock-names = "mpmcclk", "apb_pclk";
157			#address-cells = <1>;
158			#size-cells = <1>;
159
160			ranges = <0 0xe0000000 0x01000000>,
161				 <1 0xe1000000 0x01000000>,
162				 <2 0xe2000000 0x01000000>,
163				 <3 0xe3000000 0x01000000>;
164			status = "disabled";
165		};
166
167		apb {
168			#address-cells = <1>;
169			#size-cells = <1>;
170			compatible = "simple-bus";
171			ranges = <0x20000000 0x20000000 0x30000000>;
172
173			/*
174			 * ssp0 and spi1 are shared pins;
175			 * enable one in your board dts, as needed.
176			 */
177			ssp0: spi@20084000 {
178				compatible = "arm,pl022", "arm,primecell";
179				reg = <0x20084000 0x1000>;
180				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
181				clocks = <&clk LPC32XX_CLK_SSP0>;
182				clock-names = "apb_pclk";
183				#address-cells = <1>;
184				#size-cells = <0>;
185				status = "disabled";
186			};
187
188			spi1: spi@20088000 {
189				compatible = "nxp,lpc3220-spi";
190				reg = <0x20088000 0x1000>;
191				clocks = <&clk LPC32XX_CLK_SPI1>;
192				#address-cells = <1>;
193				#size-cells = <0>;
194				status = "disabled";
195			};
196
197			/*
198			 * ssp1 and spi2 are shared pins;
199			 * enable one in your board dts, as needed.
200			 */
201			ssp1: spi@2008c000 {
202				compatible = "arm,pl022", "arm,primecell";
203				reg = <0x2008c000 0x1000>;
204				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
205				clocks = <&clk LPC32XX_CLK_SSP1>;
206				clock-names = "apb_pclk";
207				#address-cells = <1>;
208				#size-cells = <0>;
209				status = "disabled";
210			};
211
212			spi2: spi@20090000 {
213				compatible = "nxp,lpc3220-spi";
214				reg = <0x20090000 0x1000>;
215				clocks = <&clk LPC32XX_CLK_SPI2>;
216				#address-cells = <1>;
217				#size-cells = <0>;
218				status = "disabled";
219			};
220
221			i2s0: i2s@20094000 {
222				compatible = "nxp,lpc3220-i2s";
223				reg = <0x20094000 0x1000>;
224				status = "disabled";
225			};
226
227			sd: sd@20098000 {
228				compatible = "arm,pl18x", "arm,primecell";
229				reg = <0x20098000 0x1000>;
230				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
231					     <13 IRQ_TYPE_LEVEL_HIGH>;
232				clocks = <&clk LPC32XX_CLK_SD>;
233				clock-names = "apb_pclk";
234				status = "disabled";
235			};
236
237			i2s1: i2s@2009c000 {
238				compatible = "nxp,lpc3220-i2s";
239				reg = <0x2009c000 0x1000>;
240				status = "disabled";
241			};
242
243			/* UART5 first since it is the default console, ttyS0 */
244			uart5: serial@40090000 {
245				/* actually, ns16550a w/ 64 byte fifos! */
246				compatible = "nxp,lpc3220-uart";
247				reg = <0x40090000 0x1000>;
248				interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
249				reg-shift = <2>;
250				clocks = <&clk LPC32XX_CLK_UART5>;
251				status = "disabled";
252			};
253
254			uart3: serial@40080000 {
255				compatible = "nxp,lpc3220-uart";
256				reg = <0x40080000 0x1000>;
257				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
258				reg-shift = <2>;
259				clocks = <&clk LPC32XX_CLK_UART3>;
260				status = "disabled";
261			};
262
263			uart4: serial@40088000 {
264				compatible = "nxp,lpc3220-uart";
265				reg = <0x40088000 0x1000>;
266				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
267				reg-shift = <2>;
268				clocks = <&clk LPC32XX_CLK_UART4>;
269				status = "disabled";
270			};
271
272			uart6: serial@40098000 {
273				compatible = "nxp,lpc3220-uart";
274				reg = <0x40098000 0x1000>;
275				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
276				reg-shift = <2>;
277				clocks = <&clk LPC32XX_CLK_UART6>;
278				status = "disabled";
279			};
280
281			i2c1: i2c@400a0000 {
282				compatible = "nxp,pnx-i2c";
283				reg = <0x400a0000 0x100>;
284				interrupt-parent = <&sic1>;
285				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
286				#address-cells = <1>;
287				#size-cells = <0>;
288				clocks = <&clk LPC32XX_CLK_I2C1>;
289			};
290
291			i2c2: i2c@400a8000 {
292				compatible = "nxp,pnx-i2c";
293				reg = <0x400a8000 0x100>;
294				interrupt-parent = <&sic1>;
295				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
296				#address-cells = <1>;
297				#size-cells = <0>;
298				clocks = <&clk LPC32XX_CLK_I2C2>;
299			};
300
301			mpwm: mpwm@400e8000 {
302				compatible = "nxp,lpc3220-motor-pwm";
303				reg = <0x400e8000 0x78>;
304				status = "disabled";
305				#pwm-cells = <2>;
306			};
307		};
308
309		fab {
310			#address-cells = <1>;
311			#size-cells = <1>;
312			compatible = "simple-bus";
313			ranges = <0x20000000 0x20000000 0x30000000>;
314
315			/* System Control Block */
316			scb {
317				compatible = "simple-bus";
318				ranges = <0x0 0x40004000 0x00001000>;
319				#address-cells = <1>;
320				#size-cells = <1>;
321
322				clk: clock-controller@0 {
323					compatible = "nxp,lpc3220-clk";
324					reg = <0x00 0x114>;
325					#clock-cells = <1>;
326
327					clocks = <&xtal_32k>, <&xtal>;
328					clock-names = "xtal_32k", "xtal";
329				};
330			};
331
332			mic: interrupt-controller@40008000 {
333				compatible = "nxp,lpc3220-mic";
334				reg = <0x40008000 0x4000>;
335				interrupt-controller;
336				#interrupt-cells = <2>;
337			};
338
339			sic1: interrupt-controller@4000c000 {
340				compatible = "nxp,lpc3220-sic";
341				reg = <0x4000c000 0x4000>;
342				interrupt-controller;
343				#interrupt-cells = <2>;
344
345				interrupt-parent = <&mic>;
346				interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
347					     <30 IRQ_TYPE_LEVEL_LOW>;
348				};
349
350			sic2: interrupt-controller@40010000 {
351				compatible = "nxp,lpc3220-sic";
352				reg = <0x40010000 0x4000>;
353				interrupt-controller;
354				#interrupt-cells = <2>;
355
356				interrupt-parent = <&mic>;
357				interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
358					     <31 IRQ_TYPE_LEVEL_LOW>;
359			};
360
361			uart1: serial@40014000 {
362				compatible = "nxp,lpc3220-hsuart";
363				reg = <0x40014000 0x1000>;
364				interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
365				status = "disabled";
366			};
367
368			uart2: serial@40018000 {
369				compatible = "nxp,lpc3220-hsuart";
370				reg = <0x40018000 0x1000>;
371				interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
372				status = "disabled";
373			};
374
375			uart7: serial@4001c000 {
376				compatible = "nxp,lpc3220-hsuart";
377				reg = <0x4001c000 0x1000>;
378				interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
379				status = "disabled";
380			};
381
382			rtc: rtc@40024000 {
383				compatible = "nxp,lpc3220-rtc";
384				reg = <0x40024000 0x1000>;
385				interrupt-parent = <&sic1>;
386				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
387				clocks = <&clk LPC32XX_CLK_RTC>;
388			};
389
390			gpio: gpio@40028000 {
391				compatible = "nxp,lpc3220-gpio";
392				reg = <0x40028000 0x1000>;
393				gpio-controller;
394				#gpio-cells = <3>; /* bank, pin, flags */
395			};
396
397			timer4: timer@4002c000 {
398				compatible = "nxp,lpc3220-timer";
399				reg = <0x4002c000 0x1000>;
400				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
401				clocks = <&clk LPC32XX_CLK_TIMER4>;
402				clock-names = "timerclk";
403				status = "disabled";
404			};
405
406			timer5: timer@40030000 {
407				compatible = "nxp,lpc3220-timer";
408				reg = <0x40030000 0x1000>;
409				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
410				clocks = <&clk LPC32XX_CLK_TIMER5>;
411				clock-names = "timerclk";
412				status = "disabled";
413			};
414
415			watchdog: watchdog@4003c000 {
416				compatible = "nxp,pnx4008-wdt";
417				reg = <0x4003c000 0x1000>;
418				clocks = <&clk LPC32XX_CLK_WDOG>;
419			};
420
421			timer0: timer@40044000 {
422				compatible = "nxp,lpc3220-timer";
423				reg = <0x40044000 0x1000>;
424				clocks = <&clk LPC32XX_CLK_TIMER0>;
425				clock-names = "timerclk";
426				interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
427			};
428
429			/*
430			 * TSC vs. ADC: Since those two share the same
431			 * hardware, you need to choose from one of the
432			 * following two and do 'status = "okay";' for one of
433			 * them
434			 */
435
436			adc: adc@40048000 {
437				compatible = "nxp,lpc3220-adc";
438				reg = <0x40048000 0x1000>;
439				interrupt-parent = <&sic1>;
440				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
441				clocks = <&clk LPC32XX_CLK_ADC>;
442				status = "disabled";
443			};
444
445			tsc: tsc@40048000 {
446				compatible = "nxp,lpc3220-tsc";
447				reg = <0x40048000 0x1000>;
448				interrupt-parent = <&sic1>;
449				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
450				clocks = <&clk LPC32XX_CLK_ADC>;
451				status = "disabled";
452			};
453
454			timer1: timer@4004c000 {
455				compatible = "nxp,lpc3220-timer";
456				reg = <0x4004c000 0x1000>;
457				interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
458				clocks = <&clk LPC32XX_CLK_TIMER1>;
459				clock-names = "timerclk";
460			};
461
462			key: key@40050000 {
463				compatible = "nxp,lpc3220-key";
464				reg = <0x40050000 0x1000>;
465				clocks = <&clk LPC32XX_CLK_KEY>;
466				interrupt-parent = <&sic1>;
467				interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
468				status = "disabled";
469			};
470
471			timer2: timer@40058000 {
472				compatible = "nxp,lpc3220-timer";
473				reg = <0x40058000 0x1000>;
474				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
475				clocks = <&clk LPC32XX_CLK_TIMER2>;
476				clock-names = "timerclk";
477				status = "disabled";
478			};
479
480			pwm1: pwm@4005c000 {
481				compatible = "nxp,lpc3220-pwm";
482				reg = <0x4005c000 0x4>;
483				clocks = <&clk LPC32XX_CLK_PWM1>;
484				assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
485				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
486				status = "disabled";
487			};
488
489			pwm2: pwm@4005c004 {
490				compatible = "nxp,lpc3220-pwm";
491				reg = <0x4005c004 0x4>;
492				clocks = <&clk LPC32XX_CLK_PWM2>;
493				assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
494				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
495				status = "disabled";
496			};
497
498			timer3: timer@40060000 {
499				compatible = "nxp,lpc3220-timer";
500				reg = <0x40060000 0x1000>;
501				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
502				clocks = <&clk LPC32XX_CLK_TIMER3>;
503				clock-names = "timerclk";
504				status = "disabled";
505			};
506		};
507	};
508};
509