1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2/*
3 * Copyright(c) 2007 Intel Corporation. All rights reserved.
4 *
5 * Maintained at www.Open-FCoE.org
6 */
7
8#ifndef _FC_FS_H_
9#define _FC_FS_H_
10
11#include <linux/types.h>
12
13/*
14 * Fibre Channel Framing and Signalling definitions.
15 * From T11 FC-FS-2 Rev 0.90 - 9 August 2005.
16 */
17
18/*
19 * Frame header
20 */
21struct fc_frame_header {
22	__u8          fh_r_ctl;	/* routing control */
23	__u8          fh_d_id[3];	/* Destination ID */
24
25	__u8          fh_cs_ctl;	/* class of service control / pri */
26	__u8          fh_s_id[3];	/* Source ID */
27
28	__u8          fh_type;		/* see enum fc_fh_type below */
29	__u8          fh_f_ctl[3];	/* frame control */
30
31	__u8          fh_seq_id;	/* sequence ID */
32	__u8          fh_df_ctl;	/* data field control */
33	__be16        fh_seq_cnt;	/* sequence count */
34
35	__be16        fh_ox_id;		/* originator exchange ID */
36	__be16        fh_rx_id;		/* responder exchange ID */
37	__be32        fh_parm_offset;	/* parameter or relative offset */
38};
39
40#define FC_FRAME_HEADER_LEN 24	/* expected length of structure */
41
42#define FC_MAX_PAYLOAD  2112U		/* max payload length in bytes */
43#define FC_MIN_MAX_PAYLOAD  256U 	/* lower limit on max payload */
44
45#define FC_MAX_FRAME	(FC_MAX_PAYLOAD + FC_FRAME_HEADER_LEN)
46#define FC_MIN_MAX_FRAME (FC_MIN_MAX_PAYLOAD + FC_FRAME_HEADER_LEN)
47
48/*
49 * fh_r_ctl - Routing control definitions.
50 */
51    /*
52     * FC-4 device_data.
53     */
54enum fc_rctl {
55	FC_RCTL_DD_UNCAT = 0x00,	/* uncategorized information */
56	FC_RCTL_DD_SOL_DATA = 0x01,	/* solicited data */
57	FC_RCTL_DD_UNSOL_CTL = 0x02,	/* unsolicited control */
58	FC_RCTL_DD_SOL_CTL = 0x03,	/* solicited control or reply */
59	FC_RCTL_DD_UNSOL_DATA = 0x04,	/* unsolicited data */
60	FC_RCTL_DD_DATA_DESC = 0x05,	/* data descriptor */
61	FC_RCTL_DD_UNSOL_CMD = 0x06,	/* unsolicited command */
62	FC_RCTL_DD_CMD_STATUS = 0x07,	/* command status */
63
64#define FC_RCTL_ILS_REQ FC_RCTL_DD_UNSOL_CTL	/* ILS request */
65#define FC_RCTL_ILS_REP FC_RCTL_DD_SOL_CTL	/* ILS reply */
66
67	/*
68	 * Extended Link_Data
69	 */
70	FC_RCTL_ELS_REQ = 0x22,	/* extended link services request */
71	FC_RCTL_ELS_REP = 0x23,	/* extended link services reply */
72	FC_RCTL_ELS4_REQ = 0x32, /* FC-4 ELS request */
73	FC_RCTL_ELS4_REP = 0x33, /* FC-4 ELS reply */
74	/*
75	 * Optional Extended Headers
76	 */
77	FC_RCTL_VFTH = 0x50,	/* virtual fabric tagging header */
78	FC_RCTL_IFRH = 0x51,	/* inter-fabric routing header */
79	FC_RCTL_ENCH = 0x52,	/* encapsulation header */
80	/*
81	 * Basic Link Services fh_r_ctl values.
82	 */
83	FC_RCTL_BA_NOP = 0x80,	/* basic link service NOP */
84	FC_RCTL_BA_ABTS = 0x81,	/* basic link service abort */
85	FC_RCTL_BA_RMC = 0x82,	/* remove connection */
86	FC_RCTL_BA_ACC = 0x84,	/* basic accept */
87	FC_RCTL_BA_RJT = 0x85,	/* basic reject */
88	FC_RCTL_BA_PRMT = 0x86,	/* dedicated connection preempted */
89	/*
90	 * Link Control Information.
91	 */
92	FC_RCTL_ACK_1 = 0xc0,	/* acknowledge_1 */
93	FC_RCTL_ACK_0 = 0xc1,	/* acknowledge_0 */
94	FC_RCTL_P_RJT = 0xc2,	/* port reject */
95	FC_RCTL_F_RJT = 0xc3,	/* fabric reject */
96	FC_RCTL_P_BSY = 0xc4,	/* port busy */
97	FC_RCTL_F_BSY = 0xc5,	/* fabric busy to data frame */
98	FC_RCTL_F_BSYL = 0xc6,	/* fabric busy to link control frame */
99	FC_RCTL_LCR = 0xc7,	/* link credit reset */
100	FC_RCTL_END = 0xc9,	/* end */
101};
102				    /* incomplete list of definitions */
103
104/*
105 * R_CTL names initializer.
106 * Please keep this matching the above definitions.
107 */
108#define FC_RCTL_NAMES_INIT { \
109	[FC_RCTL_DD_UNCAT] =		"uncat",			\
110	[FC_RCTL_DD_SOL_DATA] =		"sol data",			\
111	[FC_RCTL_DD_UNSOL_CTL] =	"unsol ctl",			\
112	[FC_RCTL_DD_SOL_CTL] =		"sol ctl/reply",		\
113	[FC_RCTL_DD_UNSOL_DATA] =	"unsol data",			\
114	[FC_RCTL_DD_DATA_DESC] =	"data desc",			\
115	[FC_RCTL_DD_UNSOL_CMD] =	"unsol cmd",			\
116	[FC_RCTL_DD_CMD_STATUS] =	"cmd status",			\
117	[FC_RCTL_ELS_REQ] =		"ELS req",			\
118	[FC_RCTL_ELS_REP] =		"ELS rep",			\
119	[FC_RCTL_ELS4_REQ] =		"FC-4 ELS req",			\
120	[FC_RCTL_ELS4_REP] =		"FC-4 ELS rep",			\
121	[FC_RCTL_BA_NOP] =		"BLS NOP",			\
122	[FC_RCTL_BA_ABTS] =		"BLS abort",			\
123	[FC_RCTL_BA_RMC] =		"BLS remove connection",	\
124	[FC_RCTL_BA_ACC] =		"BLS accept",			\
125	[FC_RCTL_BA_RJT] =		"BLS reject",			\
126	[FC_RCTL_BA_PRMT] =		"BLS dedicated connection preempted", \
127	[FC_RCTL_ACK_1] =		"LC ACK_1",			\
128	[FC_RCTL_ACK_0] =		"LC ACK_0",			\
129	[FC_RCTL_P_RJT] =		"LC port reject",		\
130	[FC_RCTL_F_RJT] =		"LC fabric reject",		\
131	[FC_RCTL_P_BSY] =		"LC port busy",			\
132	[FC_RCTL_F_BSY] =		"LC fabric busy to data frame",	\
133	[FC_RCTL_F_BSYL] =		"LC fabric busy to link control frame",\
134	[FC_RCTL_LCR] =			"LC link credit reset",		\
135	[FC_RCTL_END] =			"LC end",			\
136}
137
138/*
139 * Well-known fabric addresses.
140 */
141enum fc_well_known_fid {
142	FC_FID_NONE =           0x000000,       /* No destination */
143	FC_FID_BCAST =		0xffffff,	/* broadcast */
144	FC_FID_FLOGI =		0xfffffe,	/* fabric login */
145	FC_FID_FCTRL =		0xfffffd,	/* fabric controller */
146	FC_FID_DIR_SERV =	0xfffffc,	/* directory server */
147	FC_FID_TIME_SERV =	0xfffffb,	/* time server */
148	FC_FID_MGMT_SERV =	0xfffffa,	/* management server */
149	FC_FID_QOS =		0xfffff9,	/* QoS Facilitator */
150	FC_FID_ALIASES =	0xfffff8,	/* alias server (FC-PH2) */
151	FC_FID_SEC_KEY =	0xfffff7,	/* Security key dist. server */
152	FC_FID_CLOCK =		0xfffff6,	/* clock synch server */
153	FC_FID_MCAST_SERV =	0xfffff5,	/* multicast server */
154};
155
156#define	FC_FID_WELL_KNOWN_MAX	0xffffff /* highest well-known fabric ID */
157#define	FC_FID_WELL_KNOWN_BASE	0xfffff5 /* start of well-known fabric ID */
158
159/*
160 * Other well-known addresses, outside the above contiguous range.
161 */
162#define	FC_FID_DOM_MGR		0xfffc00	/* domain manager base */
163
164/*
165 * Fabric ID bytes.
166 */
167#define	FC_FID_DOMAIN		0
168#define	FC_FID_PORT		1
169#define	FC_FID_LINK		2
170
171/*
172 * fh_type codes
173 */
174enum fc_fh_type {
175	FC_TYPE_BLS =	0x00,	/* basic link service */
176	FC_TYPE_ELS =	0x01,	/* extended link service */
177	FC_TYPE_IP =	0x05,	/* IP over FC, RFC 4338 */
178	FC_TYPE_FCP =	0x08,	/* SCSI FCP */
179	FC_TYPE_CT =	0x20,	/* Fibre Channel Services (FC-CT) */
180	FC_TYPE_ILS =	0x22,	/* internal link service */
181	FC_TYPE_NVME =	0x28,	/* FC-NVME */
182};
183
184/*
185 * FC_TYPE names initializer.
186 * Please keep this matching the above definitions.
187 */
188#define FC_TYPE_NAMES_INIT {				\
189	[FC_TYPE_BLS] =		"BLS",			\
190	[FC_TYPE_ELS] =		"ELS",			\
191	[FC_TYPE_IP] =		"IP",			\
192	[FC_TYPE_FCP] =		"FCP",			\
193	[FC_TYPE_CT] =		"CT",			\
194	[FC_TYPE_ILS] =		"ILS",			\
195	[FC_TYPE_NVME] =	"NVME",			\
196}
197
198/*
199 * Exchange IDs.
200 */
201#define FC_XID_UNKNOWN  0xffff	/* unknown exchange ID */
202#define FC_XID_MIN	0x0	/* supported min exchange ID */
203#define FC_XID_MAX	0xfffe	/* supported max exchange ID */
204
205/*
206 * fh_f_ctl - Frame control flags.
207 */
208#define	FC_FC_EX_CTX	(1 << 23)	/* sent by responder to exchange */
209#define	FC_FC_SEQ_CTX	(1 << 22)	/* sent by responder to sequence */
210#define	FC_FC_FIRST_SEQ (1 << 21)	/* first sequence of this exchange */
211#define	FC_FC_LAST_SEQ	(1 << 20)	/* last sequence of this exchange */
212#define	FC_FC_END_SEQ	(1 << 19)	/* last frame of sequence */
213#define	FC_FC_END_CONN	(1 << 18)	/* end of class 1 connection pending */
214#define	FC_FC_RES_B17	(1 << 17)	/* reserved */
215#define	FC_FC_SEQ_INIT	(1 << 16)	/* transfer of sequence initiative */
216#define	FC_FC_X_ID_REASS (1 << 15)	/* exchange ID has been changed */
217#define	FC_FC_X_ID_INVAL (1 << 14)	/* exchange ID invalidated */
218
219#define	FC_FC_ACK_1	(1 << 12)	/* 13:12 = 1: ACK_1 expected */
220#define	FC_FC_ACK_N	(2 << 12)	/* 13:12 = 2: ACK_N expected */
221#define	FC_FC_ACK_0	(3 << 12)	/* 13:12 = 3: ACK_0 expected */
222
223#define	FC_FC_RES_B11	(1 << 11)	/* reserved */
224#define	FC_FC_RES_B10	(1 << 10)	/* reserved */
225#define	FC_FC_RETX_SEQ	(1 << 9)	/* retransmitted sequence */
226#define	FC_FC_UNI_TX	(1 << 8)	/* unidirectional transmit (class 1) */
227#define	FC_FC_CONT_SEQ(i) ((i) << 6)
228#define	FC_FC_ABT_SEQ(i) ((i) << 4)
229#define	FC_FC_REL_OFF	(1 << 3)	/* parameter is relative offset */
230#define	FC_FC_RES2	(1 << 2)	/* reserved */
231#define	FC_FC_FILL(i)	((i) & 3)	/* 1:0: bytes of trailing fill */
232
233/*
234 * BA_ACC payload.
235 */
236struct fc_ba_acc {
237	__u8		ba_seq_id_val;	/* SEQ_ID validity */
238#define FC_BA_SEQ_ID_VAL 0x80
239	__u8		ba_seq_id;	/* SEQ_ID of seq last deliverable */
240	__u8		ba_resvd[2];	/* reserved */
241	__be16		ba_ox_id;	/* OX_ID for aborted seq or exch */
242	__be16		ba_rx_id;	/* RX_ID for aborted seq or exch */
243	__be16		ba_low_seq_cnt;	/* low SEQ_CNT of aborted seq */
244	__be16		ba_high_seq_cnt; /* high SEQ_CNT of aborted seq */
245};
246
247/*
248 * BA_RJT: Basic Reject payload.
249 */
250struct fc_ba_rjt {
251	__u8		br_resvd;	/* reserved */
252	__u8		br_reason;	/* reason code */
253	__u8		br_explan;	/* reason explanation */
254	__u8		br_vendor;	/* vendor unique code */
255};
256
257/*
258 * BA_RJT reason codes.
259 * From FS-2.
260 */
261enum fc_ba_rjt_reason {
262	FC_BA_RJT_NONE =	0,	/* in software this means no reject */
263	FC_BA_RJT_INVL_CMD =	0x01,	/* invalid command code */
264	FC_BA_RJT_LOG_ERR =	0x03,	/* logical error */
265	FC_BA_RJT_LOG_BUSY =	0x05,	/* logical busy */
266	FC_BA_RJT_PROTO_ERR =	0x07,	/* protocol error */
267	FC_BA_RJT_UNABLE =	0x09,	/* unable to perform request */
268	FC_BA_RJT_VENDOR =	0xff,	/* vendor-specific (see br_vendor) */
269};
270
271/*
272 * BA_RJT reason code explanations.
273 */
274enum fc_ba_rjt_explan {
275	FC_BA_RJT_EXP_NONE =	0x00,	/* no additional expanation */
276	FC_BA_RJT_INV_XID =	0x03,	/* invalid OX_ID-RX_ID combination */
277	FC_BA_RJT_ABT =		0x05,	/* sequence aborted, no seq info */
278};
279
280/*
281 * P_RJT or F_RJT: Port Reject or Fabric Reject parameter field.
282 */
283struct fc_pf_rjt {
284	__u8		rj_action;	/* reserved */
285	__u8		rj_reason;	/* reason code */
286	__u8		rj_resvd;	/* reserved */
287	__u8		rj_vendor;	/* vendor unique code */
288};
289
290/*
291 * P_RJT and F_RJT reject reason codes.
292 */
293enum fc_pf_rjt_reason {
294	FC_RJT_NONE =		0,	/* non-reject (reserved by standard) */
295	FC_RJT_INVL_DID =	0x01,	/* invalid destination ID */
296	FC_RJT_INVL_SID =	0x02,	/* invalid source ID */
297	FC_RJT_P_UNAV_T =	0x03,	/* port unavailable, temporary */
298	FC_RJT_P_UNAV =		0x04,	/* port unavailable, permanent */
299	FC_RJT_CLS_UNSUP =	0x05,	/* class not supported */
300	FC_RJT_DEL_USAGE =	0x06,	/* delimiter usage error */
301	FC_RJT_TYPE_UNSUP =	0x07,	/* type not supported */
302	FC_RJT_LINK_CTL =	0x08,	/* invalid link control */
303	FC_RJT_R_CTL =		0x09,	/* invalid R_CTL field */
304	FC_RJT_F_CTL =		0x0a,	/* invalid F_CTL field */
305	FC_RJT_OX_ID =		0x0b,	/* invalid originator exchange ID */
306	FC_RJT_RX_ID =		0x0c,	/* invalid responder exchange ID */
307	FC_RJT_SEQ_ID =		0x0d,	/* invalid sequence ID */
308	FC_RJT_DF_CTL =		0x0e,	/* invalid DF_CTL field */
309	FC_RJT_SEQ_CNT =	0x0f,	/* invalid SEQ_CNT field */
310	FC_RJT_PARAM =		0x10,	/* invalid parameter field */
311	FC_RJT_EXCH_ERR =	0x11,	/* exchange error */
312	FC_RJT_PROTO =		0x12,	/* protocol error */
313	FC_RJT_LEN =		0x13,	/* incorrect length */
314	FC_RJT_UNEXP_ACK =	0x14,	/* unexpected ACK */
315	FC_RJT_FAB_CLASS =	0x15,	/* class unsupported by fabric entity */
316	FC_RJT_LOGI_REQ =	0x16,	/* login required */
317	FC_RJT_SEQ_XS =		0x17,	/* excessive sequences attempted */
318	FC_RJT_EXCH_EST =	0x18,	/* unable to establish exchange */
319	FC_RJT_FAB_UNAV =	0x1a,	/* fabric unavailable */
320	FC_RJT_VC_ID =		0x1b,	/* invalid VC_ID (class 4) */
321	FC_RJT_CS_CTL =		0x1c,	/* invalid CS_CTL field */
322	FC_RJT_INSUF_RES =	0x1d,	/* insuff. resources for VC (Class 4) */
323	FC_RJT_INVL_CLS =	0x1f,	/* invalid class of service */
324	FC_RJT_PREEMT_RJT =	0x20,	/* preemption request rejected */
325	FC_RJT_PREEMT_DIS =	0x21,	/* preemption not enabled */
326	FC_RJT_MCAST_ERR =	0x22,	/* multicast error */
327	FC_RJT_MCAST_ET =	0x23,	/* multicast error terminate */
328	FC_RJT_PRLI_REQ =	0x24,	/* process login required */
329	FC_RJT_INVL_ATT =	0x25,	/* invalid attachment */
330	FC_RJT_VENDOR =		0xff,	/* vendor specific reject */
331};
332
333/* default timeout values */
334
335#define FC_DEF_E_D_TOV	2000UL
336#define FC_DEF_R_A_TOV	10000UL
337
338#endif /* _FC_FS_H_ */
339