1/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ 2/* 3 * Copyright (c) 2015-2016, Integrated Device Technology Inc. 4 * Copyright (c) 2015, Prodrive Technologies 5 * Copyright (c) 2015, Texas Instruments Incorporated 6 * Copyright (c) 2015, RapidIO Trade Association 7 * All rights reserved. 8 * 9 * This software is available to you under a choice of one of two licenses. 10 * You may choose to be licensed under the terms of the GNU General Public 11 * License(GPL) Version 2, or the BSD-3 Clause license below: 12 * 13 * Redistribution and use in source and binary forms, with or without 14 * modification, are permitted provided that the following conditions are met: 15 * 16 * 1. Redistributions of source code must retain the above copyright notice, 17 * this list of conditions and the following disclaimer. 18 * 19 * 2. Redistributions in binary form must reproduce the above copyright notice, 20 * this list of conditions and the following disclaimer in the documentation 21 * and/or other materials provided with the distribution. 22 * 23 * 3. Neither the name of the copyright holder nor the names of its contributors 24 * may be used to endorse or promote products derived from this software without 25 * specific prior written permission. 26 * 27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 28 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 29 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 31 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 32 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 33 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; 34 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 35 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 36 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 37 * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 38 */ 39 40#ifndef _RIO_MPORT_CDEV_H_ 41#define _RIO_MPORT_CDEV_H_ 42 43#include <linux/ioctl.h> 44#include <linux/types.h> 45 46struct rio_mport_maint_io { 47 __u16 rioid; /* destID of remote device */ 48 __u8 hopcount; /* hopcount to remote device */ 49 __u8 pad0[5]; 50 __u32 offset; /* offset in register space */ 51 __u32 length; /* length in bytes */ 52 __u64 buffer; /* pointer to data buffer */ 53}; 54 55/* 56 * Definitions for RapidIO data transfers: 57 * - memory mapped (MAPPED) 58 * - packet generation from memory (TRANSFER) 59 */ 60#define RIO_TRANSFER_MODE_MAPPED (1 << 0) 61#define RIO_TRANSFER_MODE_TRANSFER (1 << 1) 62#define RIO_CAP_DBL_SEND (1 << 2) 63#define RIO_CAP_DBL_RECV (1 << 3) 64#define RIO_CAP_PW_SEND (1 << 4) 65#define RIO_CAP_PW_RECV (1 << 5) 66#define RIO_CAP_MAP_OUTB (1 << 6) 67#define RIO_CAP_MAP_INB (1 << 7) 68 69struct rio_mport_properties { 70 __u16 hdid; 71 __u8 id; /* Physical port ID */ 72 __u8 index; 73 __u32 flags; 74 __u32 sys_size; /* Default addressing size */ 75 __u8 port_ok; 76 __u8 link_speed; 77 __u8 link_width; 78 __u8 pad0; 79 __u32 dma_max_sge; 80 __u32 dma_max_size; 81 __u32 dma_align; 82 __u32 transfer_mode; /* Default transfer mode */ 83 __u32 cap_sys_size; /* Capable system sizes */ 84 __u32 cap_addr_size; /* Capable addressing sizes */ 85 __u32 cap_transfer_mode; /* Capable transfer modes */ 86 __u32 cap_mport; /* Mport capabilities */ 87}; 88 89/* 90 * Definitions for RapidIO events; 91 * - incoming port-writes 92 * - incoming doorbells 93 */ 94#define RIO_DOORBELL (1 << 0) 95#define RIO_PORTWRITE (1 << 1) 96 97struct rio_doorbell { 98 __u16 rioid; 99 __u16 payload; 100}; 101 102struct rio_doorbell_filter { 103 __u16 rioid; /* Use RIO_INVALID_DESTID to match all ids */ 104 __u16 low; 105 __u16 high; 106 __u16 pad0; 107}; 108 109 110struct rio_portwrite { 111 __u32 payload[16]; 112}; 113 114struct rio_pw_filter { 115 __u32 mask; 116 __u32 low; 117 __u32 high; 118 __u32 pad0; 119}; 120 121/* RapidIO base address for inbound requests set to value defined below 122 * indicates that no specific RIO-to-local address translation is requested 123 * and driver should use direct (one-to-one) address mapping. 124*/ 125#define RIO_MAP_ANY_ADDR (__u64)(~((__u64) 0)) 126 127struct rio_mmap { 128 __u16 rioid; 129 __u16 pad0[3]; 130 __u64 rio_addr; 131 __u64 length; 132 __u64 handle; 133 __u64 address; 134}; 135 136struct rio_dma_mem { 137 __u64 length; /* length of DMA memory */ 138 __u64 dma_handle; /* handle associated with this memory */ 139 __u64 address; 140}; 141 142struct rio_event { 143 __u32 header; /* event type RIO_DOORBELL or RIO_PORTWRITE */ 144 union { 145 struct rio_doorbell doorbell; /* header for RIO_DOORBELL */ 146 struct rio_portwrite portwrite; /* header for RIO_PORTWRITE */ 147 } u; 148 __u32 pad0; 149}; 150 151enum rio_transfer_sync { 152 RIO_TRANSFER_SYNC, /* synchronous transfer */ 153 RIO_TRANSFER_ASYNC, /* asynchronous transfer */ 154 RIO_TRANSFER_FAF, /* fire-and-forget transfer */ 155}; 156 157enum rio_transfer_dir { 158 RIO_TRANSFER_DIR_READ, /* Read operation */ 159 RIO_TRANSFER_DIR_WRITE, /* Write operation */ 160}; 161 162/* 163 * RapidIO data exchange transactions are lists of individual transfers. Each 164 * transfer exchanges data between two RapidIO devices by remote direct memory 165 * access and has its own completion code. 166 * 167 * The RapidIO specification defines four types of data exchange requests: 168 * NREAD, NWRITE, SWRITE and NWRITE_R. The RapidIO DMA channel interface allows 169 * to specify the required type of write operation or combination of them when 170 * only the last data packet requires response. 171 * 172 * NREAD: read up to 256 bytes from remote device memory into local memory 173 * NWRITE: write up to 256 bytes from local memory to remote device memory 174 * without confirmation 175 * SWRITE: as NWRITE, but all addresses and payloads must be 64-bit aligned 176 * NWRITE_R: as NWRITE, but expect acknowledgment from remote device. 177 * 178 * The default exchange is chosen from NREAD and any of the WRITE modes as the 179 * driver sees fit. For write requests the user can explicitly choose between 180 * any of the write modes for each transaction. 181 */ 182enum rio_exchange { 183 RIO_EXCHANGE_DEFAULT, /* Default method */ 184 RIO_EXCHANGE_NWRITE, /* All packets using NWRITE */ 185 RIO_EXCHANGE_SWRITE, /* All packets using SWRITE */ 186 RIO_EXCHANGE_NWRITE_R, /* Last packet NWRITE_R, others NWRITE */ 187 RIO_EXCHANGE_SWRITE_R, /* Last packet NWRITE_R, others SWRITE */ 188 RIO_EXCHANGE_NWRITE_R_ALL, /* All packets using NWRITE_R */ 189}; 190 191struct rio_transfer_io { 192 __u64 rio_addr; /* Address in target's RIO mem space */ 193 __u64 loc_addr; 194 __u64 handle; 195 __u64 offset; /* Offset in buffer */ 196 __u64 length; /* Length in bytes */ 197 __u16 rioid; /* Target destID */ 198 __u16 method; /* Data exchange method, one of rio_exchange enum */ 199 __u32 completion_code; /* Completion code for this transfer */ 200}; 201 202struct rio_transaction { 203 __u64 block; /* Pointer to array of <count> transfers */ 204 __u32 count; /* Number of transfers */ 205 __u32 transfer_mode; /* Data transfer mode */ 206 __u16 sync; /* Synch method, one of rio_transfer_sync enum */ 207 __u16 dir; /* Transfer direction, one of rio_transfer_dir enum */ 208 __u32 pad0; 209}; 210 211struct rio_async_tx_wait { 212 __u32 token; /* DMA transaction ID token */ 213 __u32 timeout; /* Wait timeout in msec, if 0 use default TO */ 214}; 215 216#define RIO_MAX_DEVNAME_SZ 20 217 218struct rio_rdev_info { 219 __u16 destid; 220 __u8 hopcount; 221 __u8 pad0; 222 __u32 comptag; 223 char name[RIO_MAX_DEVNAME_SZ + 1]; 224}; 225 226/* Driver IOCTL codes */ 227#define RIO_MPORT_DRV_MAGIC 'm' 228 229#define RIO_MPORT_MAINT_HDID_SET \ 230 _IOW(RIO_MPORT_DRV_MAGIC, 1, __u16) 231#define RIO_MPORT_MAINT_COMPTAG_SET \ 232 _IOW(RIO_MPORT_DRV_MAGIC, 2, __u32) 233#define RIO_MPORT_MAINT_PORT_IDX_GET \ 234 _IOR(RIO_MPORT_DRV_MAGIC, 3, __u32) 235#define RIO_MPORT_GET_PROPERTIES \ 236 _IOR(RIO_MPORT_DRV_MAGIC, 4, struct rio_mport_properties) 237#define RIO_MPORT_MAINT_READ_LOCAL \ 238 _IOR(RIO_MPORT_DRV_MAGIC, 5, struct rio_mport_maint_io) 239#define RIO_MPORT_MAINT_WRITE_LOCAL \ 240 _IOW(RIO_MPORT_DRV_MAGIC, 6, struct rio_mport_maint_io) 241#define RIO_MPORT_MAINT_READ_REMOTE \ 242 _IOR(RIO_MPORT_DRV_MAGIC, 7, struct rio_mport_maint_io) 243#define RIO_MPORT_MAINT_WRITE_REMOTE \ 244 _IOW(RIO_MPORT_DRV_MAGIC, 8, struct rio_mport_maint_io) 245#define RIO_ENABLE_DOORBELL_RANGE \ 246 _IOW(RIO_MPORT_DRV_MAGIC, 9, struct rio_doorbell_filter) 247#define RIO_DISABLE_DOORBELL_RANGE \ 248 _IOW(RIO_MPORT_DRV_MAGIC, 10, struct rio_doorbell_filter) 249#define RIO_ENABLE_PORTWRITE_RANGE \ 250 _IOW(RIO_MPORT_DRV_MAGIC, 11, struct rio_pw_filter) 251#define RIO_DISABLE_PORTWRITE_RANGE \ 252 _IOW(RIO_MPORT_DRV_MAGIC, 12, struct rio_pw_filter) 253#define RIO_SET_EVENT_MASK \ 254 _IOW(RIO_MPORT_DRV_MAGIC, 13, __u32) 255#define RIO_GET_EVENT_MASK \ 256 _IOR(RIO_MPORT_DRV_MAGIC, 14, __u32) 257#define RIO_MAP_OUTBOUND \ 258 _IOWR(RIO_MPORT_DRV_MAGIC, 15, struct rio_mmap) 259#define RIO_UNMAP_OUTBOUND \ 260 _IOW(RIO_MPORT_DRV_MAGIC, 16, struct rio_mmap) 261#define RIO_MAP_INBOUND \ 262 _IOWR(RIO_MPORT_DRV_MAGIC, 17, struct rio_mmap) 263#define RIO_UNMAP_INBOUND \ 264 _IOW(RIO_MPORT_DRV_MAGIC, 18, __u64) 265#define RIO_ALLOC_DMA \ 266 _IOWR(RIO_MPORT_DRV_MAGIC, 19, struct rio_dma_mem) 267#define RIO_FREE_DMA \ 268 _IOW(RIO_MPORT_DRV_MAGIC, 20, __u64) 269#define RIO_TRANSFER \ 270 _IOWR(RIO_MPORT_DRV_MAGIC, 21, struct rio_transaction) 271#define RIO_WAIT_FOR_ASYNC \ 272 _IOW(RIO_MPORT_DRV_MAGIC, 22, struct rio_async_tx_wait) 273#define RIO_DEV_ADD \ 274 _IOW(RIO_MPORT_DRV_MAGIC, 23, struct rio_rdev_info) 275#define RIO_DEV_DEL \ 276 _IOW(RIO_MPORT_DRV_MAGIC, 24, struct rio_rdev_info) 277 278#endif /* _RIO_MPORT_CDEV_H_ */ 279