1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * Board initialization code should put one of these into dev->platform_data
4 * and place the isp116x onto platform_bus.
5 */
6
7#ifndef __LINUX_USB_ISP116X_H
8#define __LINUX_USB_ISP116X_H
9
10struct isp116x_platform_data {
11	/* Enable internal resistors on downstream ports */
12	unsigned sel15Kres:1;
13	/* On-chip overcurrent detection */
14	unsigned oc_enable:1;
15	/* INT output polarity */
16	unsigned int_act_high:1;
17	/* INT edge or level triggered */
18	unsigned int_edge_triggered:1;
19	/* Enable wakeup by devices on usb bus (e.g. wakeup
20	   by attachment/detachment or by device activity
21	   such as moving a mouse). When chosen, this option
22	   prevents stopping internal clock, increasing
23	   thereby power consumption in suspended state. */
24	unsigned remote_wakeup_enable:1;
25	/* Inter-io delay (ns). The chip is picky about access timings; it
26	   expects at least:
27	   150ns delay between consecutive accesses to DATA_REG,
28	   300ns delay between access to ADDR_REG and DATA_REG
29	   OE, WE MUST NOT be changed during these intervals
30	 */
31	void (*delay) (struct device *dev, int delay);
32};
33
34#endif /* __LINUX_USB_ISP116X_H */
35