1/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */ 2/* Copyright(c) 2015-17 Intel Corporation. */ 3 4#ifndef __SOUNDWIRE_H 5#define __SOUNDWIRE_H 6 7#include <linux/bug.h> 8#include <linux/lockdep_types.h> 9#include <linux/irq.h> 10#include <linux/irqdomain.h> 11#include <linux/mod_devicetable.h> 12#include <linux/bitfield.h> 13 14struct sdw_bus; 15struct sdw_slave; 16 17/* SDW spec defines and enums, as defined by MIPI 1.1. Spec */ 18 19/* SDW Broadcast Device Number */ 20#define SDW_BROADCAST_DEV_NUM 15 21 22/* SDW Enumeration Device Number */ 23#define SDW_ENUM_DEV_NUM 0 24 25/* SDW Group Device Numbers */ 26#define SDW_GROUP12_DEV_NUM 12 27#define SDW_GROUP13_DEV_NUM 13 28 29/* SDW Master Device Number, not supported yet */ 30#define SDW_MASTER_DEV_NUM 14 31 32#define SDW_NUM_DEV_ID_REGISTERS 6 33/* frame shape defines */ 34 35/* 36 * Note: The maximum row define in SoundWire spec 1.1 is 23. In order to 37 * fill hole with 0, one more dummy entry is added 38 */ 39#define SDW_FRAME_ROWS 24 40#define SDW_FRAME_COLS 8 41#define SDW_FRAME_ROW_COLS (SDW_FRAME_ROWS * SDW_FRAME_COLS) 42 43#define SDW_FRAME_CTRL_BITS 48 44#define SDW_MAX_DEVICES 11 45 46#define SDW_MAX_PORTS 15 47#define SDW_VALID_PORT_RANGE(n) ((n) < SDW_MAX_PORTS && (n) >= 1) 48 49enum { 50 SDW_PORT_DIRN_SINK = 0, 51 SDW_PORT_DIRN_SOURCE, 52 SDW_PORT_DIRN_MAX, 53}; 54 55/* 56 * constants for flow control, ports and transport 57 * 58 * these are bit masks as devices can have multiple capabilities 59 */ 60 61/* 62 * flow modes for SDW port. These can be isochronous, tx controlled, 63 * rx controlled or async 64 */ 65#define SDW_PORT_FLOW_MODE_ISOCH 0 66#define SDW_PORT_FLOW_MODE_TX_CNTRL BIT(0) 67#define SDW_PORT_FLOW_MODE_RX_CNTRL BIT(1) 68#define SDW_PORT_FLOW_MODE_ASYNC GENMASK(1, 0) 69 70/* sample packaging for block. It can be per port or per channel */ 71#define SDW_BLOCK_PACKG_PER_PORT BIT(0) 72#define SDW_BLOCK_PACKG_PER_CH BIT(1) 73 74/** 75 * enum sdw_slave_status - Slave status 76 * @SDW_SLAVE_UNATTACHED: Slave is not attached with the bus. 77 * @SDW_SLAVE_ATTACHED: Slave is attached with bus. 78 * @SDW_SLAVE_ALERT: Some alert condition on the Slave 79 * @SDW_SLAVE_RESERVED: Reserved for future use 80 */ 81enum sdw_slave_status { 82 SDW_SLAVE_UNATTACHED = 0, 83 SDW_SLAVE_ATTACHED = 1, 84 SDW_SLAVE_ALERT = 2, 85 SDW_SLAVE_RESERVED = 3, 86}; 87 88/** 89 * enum sdw_clk_stop_type: clock stop operations 90 * 91 * @SDW_CLK_PRE_PREPARE: pre clock stop prepare 92 * @SDW_CLK_POST_PREPARE: post clock stop prepare 93 * @SDW_CLK_PRE_DEPREPARE: pre clock stop de-prepare 94 * @SDW_CLK_POST_DEPREPARE: post clock stop de-prepare 95 */ 96enum sdw_clk_stop_type { 97 SDW_CLK_PRE_PREPARE = 0, 98 SDW_CLK_POST_PREPARE, 99 SDW_CLK_PRE_DEPREPARE, 100 SDW_CLK_POST_DEPREPARE, 101}; 102 103/** 104 * enum sdw_command_response - Command response as defined by SDW spec 105 * @SDW_CMD_OK: cmd was successful 106 * @SDW_CMD_IGNORED: cmd was ignored 107 * @SDW_CMD_FAIL: cmd was NACKed 108 * @SDW_CMD_TIMEOUT: cmd timedout 109 * @SDW_CMD_FAIL_OTHER: cmd failed due to other reason than above 110 * 111 * NOTE: The enum is different than actual Spec as response in the Spec is 112 * combination of ACK/NAK bits 113 * 114 * SDW_CMD_TIMEOUT/FAIL_OTHER is defined for SW use, not in spec 115 */ 116enum sdw_command_response { 117 SDW_CMD_OK = 0, 118 SDW_CMD_IGNORED = 1, 119 SDW_CMD_FAIL = 2, 120 SDW_CMD_TIMEOUT = 3, 121 SDW_CMD_FAIL_OTHER = 4, 122}; 123 124/* block group count enum */ 125enum sdw_dpn_grouping { 126 SDW_BLK_GRP_CNT_1 = 0, 127 SDW_BLK_GRP_CNT_2 = 1, 128 SDW_BLK_GRP_CNT_3 = 2, 129 SDW_BLK_GRP_CNT_4 = 3, 130}; 131 132/* block packing mode enum */ 133enum sdw_dpn_pkg_mode { 134 SDW_BLK_PKG_PER_PORT = 0, 135 SDW_BLK_PKG_PER_CHANNEL = 1 136}; 137 138/** 139 * enum sdw_stream_type: data stream type 140 * 141 * @SDW_STREAM_PCM: PCM data stream 142 * @SDW_STREAM_PDM: PDM data stream 143 * 144 * spec doesn't define this, but is used in implementation 145 */ 146enum sdw_stream_type { 147 SDW_STREAM_PCM = 0, 148 SDW_STREAM_PDM = 1, 149}; 150 151/** 152 * enum sdw_data_direction: Data direction 153 * 154 * @SDW_DATA_DIR_RX: Data into Port 155 * @SDW_DATA_DIR_TX: Data out of Port 156 */ 157enum sdw_data_direction { 158 SDW_DATA_DIR_RX = 0, 159 SDW_DATA_DIR_TX = 1, 160}; 161 162/** 163 * enum sdw_port_data_mode: Data Port mode 164 * 165 * @SDW_PORT_DATA_MODE_NORMAL: Normal data mode where audio data is received 166 * and transmitted. 167 * @SDW_PORT_DATA_MODE_PRBS: Test mode which uses a PRBS generator to produce 168 * a pseudo random data pattern that is transferred 169 * @SDW_PORT_DATA_MODE_STATIC_0: Simple test mode which uses static value of 170 * logic 0. The encoding will result in no signal transitions 171 * @SDW_PORT_DATA_MODE_STATIC_1: Simple test mode which uses static value of 172 * logic 1. The encoding will result in signal transitions at every bitslot 173 * owned by this Port 174 */ 175enum sdw_port_data_mode { 176 SDW_PORT_DATA_MODE_NORMAL = 0, 177 SDW_PORT_DATA_MODE_PRBS = 1, 178 SDW_PORT_DATA_MODE_STATIC_0 = 2, 179 SDW_PORT_DATA_MODE_STATIC_1 = 3, 180}; 181 182/* 183 * SDW properties, defined in MIPI DisCo spec v1.0 184 */ 185enum sdw_clk_stop_reset_behave { 186 SDW_CLK_STOP_KEEP_STATUS = 1, 187}; 188 189/** 190 * enum sdw_p15_behave - Slave Port 15 behaviour when the Master attempts a 191 * read 192 * @SDW_P15_READ_IGNORED: Read is ignored 193 * @SDW_P15_CMD_OK: Command is ok 194 */ 195enum sdw_p15_behave { 196 SDW_P15_READ_IGNORED = 0, 197 SDW_P15_CMD_OK = 1, 198}; 199 200/** 201 * enum sdw_dpn_type - Data port types 202 * @SDW_DPN_FULL: Full Data Port is supported 203 * @SDW_DPN_SIMPLE: Simplified Data Port as defined in spec. 204 * DPN_SampleCtrl2, DPN_OffsetCtrl2, DPN_HCtrl and DPN_BlockCtrl3 205 * are not implemented. 206 * @SDW_DPN_REDUCED: Reduced Data Port as defined in spec. 207 * DPN_SampleCtrl2, DPN_HCtrl are not implemented. 208 */ 209enum sdw_dpn_type { 210 SDW_DPN_FULL = 0, 211 SDW_DPN_SIMPLE = 1, 212 SDW_DPN_REDUCED = 2, 213}; 214 215/** 216 * enum sdw_clk_stop_mode - Clock Stop modes 217 * @SDW_CLK_STOP_MODE0: Slave can continue operation seamlessly on clock 218 * restart 219 * @SDW_CLK_STOP_MODE1: Slave may have entered a deeper power-saving mode, 220 * not capable of continuing operation seamlessly when the clock restarts 221 */ 222enum sdw_clk_stop_mode { 223 SDW_CLK_STOP_MODE0 = 0, 224 SDW_CLK_STOP_MODE1 = 1, 225}; 226 227/** 228 * struct sdw_dp0_prop - DP0 properties 229 * @max_word: Maximum number of bits in a Payload Channel Sample, 1 to 64 230 * (inclusive) 231 * @min_word: Minimum number of bits in a Payload Channel Sample, 1 to 64 232 * (inclusive) 233 * @num_words: number of wordlengths supported 234 * @words: wordlengths supported 235 * @BRA_flow_controlled: Slave implementation results in an OK_NotReady 236 * response 237 * @simple_ch_prep_sm: If channel prepare sequence is required 238 * @imp_def_interrupts: If set, each bit corresponds to support for 239 * implementation-defined interrupts 240 * 241 * The wordlengths are specified by Spec as max, min AND number of 242 * discrete values, implementation can define based on the wordlengths they 243 * support 244 */ 245struct sdw_dp0_prop { 246 u32 max_word; 247 u32 min_word; 248 u32 num_words; 249 u32 *words; 250 bool BRA_flow_controlled; 251 bool simple_ch_prep_sm; 252 bool imp_def_interrupts; 253}; 254 255/** 256 * struct sdw_dpn_audio_mode - Audio mode properties for DPn 257 * @bus_min_freq: Minimum bus frequency, in Hz 258 * @bus_max_freq: Maximum bus frequency, in Hz 259 * @bus_num_freq: Number of discrete frequencies supported 260 * @bus_freq: Discrete bus frequencies, in Hz 261 * @min_freq: Minimum sampling frequency, in Hz 262 * @max_freq: Maximum sampling bus frequency, in Hz 263 * @num_freq: Number of discrete sampling frequency supported 264 * @freq: Discrete sampling frequencies, in Hz 265 * @prep_ch_behave: Specifies the dependencies between Channel Prepare 266 * sequence and bus clock configuration 267 * If 0, Channel Prepare can happen at any Bus clock rate 268 * If 1, Channel Prepare sequence shall happen only after Bus clock is 269 * changed to a frequency supported by this mode or compatible modes 270 * described by the next field 271 * @glitchless: Bitmap describing possible glitchless transitions from this 272 * Audio Mode to other Audio Modes 273 */ 274struct sdw_dpn_audio_mode { 275 u32 bus_min_freq; 276 u32 bus_max_freq; 277 u32 bus_num_freq; 278 u32 *bus_freq; 279 u32 max_freq; 280 u32 min_freq; 281 u32 num_freq; 282 u32 *freq; 283 u32 prep_ch_behave; 284 u32 glitchless; 285}; 286 287/** 288 * struct sdw_dpn_prop - Data Port DPn properties 289 * @num: port number 290 * @max_word: Maximum number of bits in a Payload Channel Sample, 1 to 64 291 * (inclusive) 292 * @min_word: Minimum number of bits in a Payload Channel Sample, 1 to 64 293 * (inclusive) 294 * @num_words: Number of discrete supported wordlengths 295 * @words: Discrete supported wordlength 296 * @type: Data port type. Full, Simplified or Reduced 297 * @max_grouping: Maximum number of samples that can be grouped together for 298 * a full data port 299 * @simple_ch_prep_sm: If the port supports simplified channel prepare state 300 * machine 301 * @ch_prep_timeout: Port-specific timeout value, in milliseconds 302 * @imp_def_interrupts: If set, each bit corresponds to support for 303 * implementation-defined interrupts 304 * @max_ch: Maximum channels supported 305 * @min_ch: Minimum channels supported 306 * @num_channels: Number of discrete channels supported 307 * @channels: Discrete channels supported 308 * @num_ch_combinations: Number of channel combinations supported 309 * @ch_combinations: Channel combinations supported 310 * @modes: SDW mode supported 311 * @max_async_buffer: Number of samples that this port can buffer in 312 * asynchronous modes 313 * @block_pack_mode: Type of block port mode supported 314 * @read_only_wordlength: Read Only wordlength field in DPN_BlockCtrl1 register 315 * @port_encoding: Payload Channel Sample encoding schemes supported 316 * @audio_modes: Audio modes supported 317 */ 318struct sdw_dpn_prop { 319 u32 num; 320 u32 max_word; 321 u32 min_word; 322 u32 num_words; 323 u32 *words; 324 enum sdw_dpn_type type; 325 u32 max_grouping; 326 bool simple_ch_prep_sm; 327 u32 ch_prep_timeout; 328 u32 imp_def_interrupts; 329 u32 max_ch; 330 u32 min_ch; 331 u32 num_channels; 332 u32 *channels; 333 u32 num_ch_combinations; 334 u32 *ch_combinations; 335 u32 modes; 336 u32 max_async_buffer; 337 bool block_pack_mode; 338 bool read_only_wordlength; 339 u32 port_encoding; 340 struct sdw_dpn_audio_mode *audio_modes; 341}; 342 343/** 344 * struct sdw_slave_prop - SoundWire Slave properties 345 * @mipi_revision: Spec version of the implementation 346 * @wake_capable: Wake-up events are supported 347 * @test_mode_capable: If test mode is supported 348 * @clk_stop_mode1: Clock-Stop Mode 1 is supported 349 * @simple_clk_stop_capable: Simple clock mode is supported 350 * @clk_stop_timeout: Worst-case latency of the Clock Stop Prepare State 351 * Machine transitions, in milliseconds 352 * @ch_prep_timeout: Worst-case latency of the Channel Prepare State Machine 353 * transitions, in milliseconds 354 * @reset_behave: Slave keeps the status of the SlaveStopClockPrepare 355 * state machine (P=1 SCSP_SM) after exit from clock-stop mode1 356 * @high_PHY_capable: Slave is HighPHY capable 357 * @paging_support: Slave implements paging registers SCP_AddrPage1 and 358 * SCP_AddrPage2 359 * @bank_delay_support: Slave implements bank delay/bridge support registers 360 * SCP_BankDelay and SCP_NextFrame 361 * @p15_behave: Slave behavior when the Master attempts a read to the Port15 362 * alias 363 * @lane_control_support: Slave supports lane control 364 * @master_count: Number of Masters present on this Slave 365 * @source_ports: Bitmap identifying source ports 366 * @sink_ports: Bitmap identifying sink ports 367 * @dp0_prop: Data Port 0 properties 368 * @src_dpn_prop: Source Data Port N properties 369 * @sink_dpn_prop: Sink Data Port N properties 370 * @scp_int1_mask: SCP_INT1_MASK desired settings 371 * @quirks: bitmask identifying deltas from the MIPI specification 372 * @clock_reg_supported: the Peripheral implements the clock base and scale 373 * registers introduced with the SoundWire 1.2 specification. SDCA devices 374 * do not need to set this boolean property as the registers are required. 375 * @use_domain_irq: call actual IRQ handler on slave, as well as callback 376 */ 377struct sdw_slave_prop { 378 u32 mipi_revision; 379 bool wake_capable; 380 bool test_mode_capable; 381 bool clk_stop_mode1; 382 bool simple_clk_stop_capable; 383 u32 clk_stop_timeout; 384 u32 ch_prep_timeout; 385 enum sdw_clk_stop_reset_behave reset_behave; 386 bool high_PHY_capable; 387 bool paging_support; 388 bool bank_delay_support; 389 enum sdw_p15_behave p15_behave; 390 bool lane_control_support; 391 u32 master_count; 392 u32 source_ports; 393 u32 sink_ports; 394 struct sdw_dp0_prop *dp0_prop; 395 struct sdw_dpn_prop *src_dpn_prop; 396 struct sdw_dpn_prop *sink_dpn_prop; 397 u8 scp_int1_mask; 398 u32 quirks; 399 bool clock_reg_supported; 400 bool use_domain_irq; 401}; 402 403#define SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY BIT(0) 404 405/** 406 * struct sdw_master_prop - Master properties 407 * @revision: MIPI spec version of the implementation 408 * @clk_stop_modes: Bitmap, bit N set when clock-stop-modeN supported 409 * @max_clk_freq: Maximum Bus clock frequency, in Hz 410 * @num_clk_gears: Number of clock gears supported 411 * @clk_gears: Clock gears supported 412 * @num_clk_freq: Number of clock frequencies supported, in Hz 413 * @clk_freq: Clock frequencies supported, in Hz 414 * @default_frame_rate: Controller default Frame rate, in Hz 415 * @default_row: Number of rows 416 * @default_col: Number of columns 417 * @dynamic_frame: Dynamic frame shape supported 418 * @err_threshold: Number of times that software may retry sending a single 419 * command 420 * @mclk_freq: clock reference passed to SoundWire Master, in Hz. 421 * @hw_disabled: if true, the Master is not functional, typically due to pin-mux 422 * @quirks: bitmask identifying optional behavior beyond the scope of the MIPI specification 423 */ 424struct sdw_master_prop { 425 u32 revision; 426 u32 clk_stop_modes; 427 u32 max_clk_freq; 428 u32 num_clk_gears; 429 u32 *clk_gears; 430 u32 num_clk_freq; 431 u32 *clk_freq; 432 u32 default_frame_rate; 433 u32 default_row; 434 u32 default_col; 435 bool dynamic_frame; 436 u32 err_threshold; 437 u32 mclk_freq; 438 bool hw_disabled; 439 u64 quirks; 440}; 441 442/* Definitions for Master quirks */ 443 444/* 445 * In a number of platforms bus clashes are reported after a hardware 446 * reset but without any explanations or evidence of a real problem. 447 * The following quirk will discard all initial bus clash interrupts 448 * but will leave the detection on should real bus clashes happen 449 */ 450#define SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH BIT(0) 451 452/* 453 * Some Slave devices have known issues with incorrect parity errors 454 * reported after a hardware reset. However during integration unexplained 455 * parity errors can be reported by Slave devices, possibly due to electrical 456 * issues at the Master level. 457 * The following quirk will discard all initial parity errors but will leave 458 * the detection on should real parity errors happen. 459 */ 460#define SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY BIT(1) 461 462int sdw_master_read_prop(struct sdw_bus *bus); 463int sdw_slave_read_prop(struct sdw_slave *slave); 464 465/* 466 * SDW Slave Structures and APIs 467 */ 468 469#define SDW_IGNORED_UNIQUE_ID 0xFF 470 471/** 472 * struct sdw_slave_id - Slave ID 473 * @mfg_id: MIPI Manufacturer ID 474 * @part_id: Device Part ID 475 * @class_id: MIPI Class ID (defined starting with SoundWire 1.2 spec) 476 * @unique_id: Device unique ID 477 * @sdw_version: SDW version implemented 478 * 479 * The order of the IDs here does not follow the DisCo spec definitions 480 */ 481struct sdw_slave_id { 482 __u16 mfg_id; 483 __u16 part_id; 484 __u8 class_id; 485 __u8 unique_id; 486 __u8 sdw_version:4; 487}; 488 489struct sdw_extended_slave_id { 490 int link_id; 491 struct sdw_slave_id id; 492}; 493 494/* 495 * Helper macros to extract the MIPI-defined IDs 496 * 497 * Spec definition 498 * Register Bit Contents 499 * DevId_0 [7:4] 47:44 sdw_version 500 * DevId_0 [3:0] 43:40 unique_id 501 * DevId_1 39:32 mfg_id [15:8] 502 * DevId_2 31:24 mfg_id [7:0] 503 * DevId_3 23:16 part_id [15:8] 504 * DevId_4 15:08 part_id [7:0] 505 * DevId_5 07:00 class_id 506 * 507 * The MIPI DisCo for SoundWire defines in addition the link_id as bits 51:48 508 */ 509#define SDW_DISCO_LINK_ID_MASK GENMASK_ULL(51, 48) 510#define SDW_VERSION_MASK GENMASK_ULL(47, 44) 511#define SDW_UNIQUE_ID_MASK GENMASK_ULL(43, 40) 512#define SDW_MFG_ID_MASK GENMASK_ULL(39, 24) 513#define SDW_PART_ID_MASK GENMASK_ULL(23, 8) 514#define SDW_CLASS_ID_MASK GENMASK_ULL(7, 0) 515 516#define SDW_DISCO_LINK_ID(addr) FIELD_GET(SDW_DISCO_LINK_ID_MASK, addr) 517#define SDW_VERSION(addr) FIELD_GET(SDW_VERSION_MASK, addr) 518#define SDW_UNIQUE_ID(addr) FIELD_GET(SDW_UNIQUE_ID_MASK, addr) 519#define SDW_MFG_ID(addr) FIELD_GET(SDW_MFG_ID_MASK, addr) 520#define SDW_PART_ID(addr) FIELD_GET(SDW_PART_ID_MASK, addr) 521#define SDW_CLASS_ID(addr) FIELD_GET(SDW_CLASS_ID_MASK, addr) 522 523/** 524 * struct sdw_slave_intr_status - Slave interrupt status 525 * @sdca_cascade: set if the Slave device reports an SDCA interrupt 526 * @control_port: control port status 527 * @port: data port status 528 */ 529struct sdw_slave_intr_status { 530 bool sdca_cascade; 531 u8 control_port; 532 u8 port[15]; 533}; 534 535/** 536 * sdw_reg_bank - SoundWire register banks 537 * @SDW_BANK0: Soundwire register bank 0 538 * @SDW_BANK1: Soundwire register bank 1 539 */ 540enum sdw_reg_bank { 541 SDW_BANK0, 542 SDW_BANK1, 543}; 544 545/** 546 * struct sdw_bus_conf: Bus configuration 547 * 548 * @clk_freq: Clock frequency, in Hz 549 * @num_rows: Number of rows in frame 550 * @num_cols: Number of columns in frame 551 * @bank: Next register bank 552 */ 553struct sdw_bus_conf { 554 unsigned int clk_freq; 555 unsigned int num_rows; 556 unsigned int num_cols; 557 unsigned int bank; 558}; 559 560/** 561 * struct sdw_prepare_ch: Prepare/De-prepare Data Port channel 562 * 563 * @num: Port number 564 * @ch_mask: Active channel mask 565 * @prepare: Prepare (true) /de-prepare (false) channel 566 * @bank: Register bank, which bank Slave/Master driver should program for 567 * implementation defined registers. This is always updated to next_bank 568 * value read from bus params. 569 * 570 */ 571struct sdw_prepare_ch { 572 unsigned int num; 573 unsigned int ch_mask; 574 bool prepare; 575 unsigned int bank; 576}; 577 578/** 579 * enum sdw_port_prep_ops: Prepare operations for Data Port 580 * 581 * @SDW_OPS_PORT_PRE_PREP: Pre prepare operation for the Port 582 * @SDW_OPS_PORT_PRE_DEPREP: Pre deprepare operation for the Port 583 * @SDW_OPS_PORT_POST_PREP: Post prepare operation for the Port 584 * @SDW_OPS_PORT_POST_DEPREP: Post deprepare operation for the Port 585 */ 586enum sdw_port_prep_ops { 587 SDW_OPS_PORT_PRE_PREP = 0, 588 SDW_OPS_PORT_PRE_DEPREP, 589 SDW_OPS_PORT_POST_PREP, 590 SDW_OPS_PORT_POST_DEPREP, 591}; 592 593/** 594 * struct sdw_bus_params: Structure holding bus configuration 595 * 596 * @curr_bank: Current bank in use (BANK0/BANK1) 597 * @next_bank: Next bank to use (BANK0/BANK1). next_bank will always be 598 * set to !curr_bank 599 * @max_dr_freq: Maximum double rate clock frequency supported, in Hz 600 * @curr_dr_freq: Current double rate clock frequency, in Hz 601 * @bandwidth: Current bandwidth 602 * @col: Active columns 603 * @row: Active rows 604 * @s_data_mode: NORMAL, STATIC or PRBS mode for all Slave ports 605 * @m_data_mode: NORMAL, STATIC or PRBS mode for all Master ports. The value 606 * should be the same to detect transmission issues, but can be different to 607 * test the interrupt reports 608 */ 609struct sdw_bus_params { 610 enum sdw_reg_bank curr_bank; 611 enum sdw_reg_bank next_bank; 612 unsigned int max_dr_freq; 613 unsigned int curr_dr_freq; 614 unsigned int bandwidth; 615 unsigned int col; 616 unsigned int row; 617 int s_data_mode; 618 int m_data_mode; 619}; 620 621/** 622 * struct sdw_slave_ops: Slave driver callback ops 623 * 624 * @read_prop: Read Slave properties 625 * @interrupt_callback: Device interrupt notification (invoked in thread 626 * context) 627 * @update_status: Update Slave status 628 * @bus_config: Update the bus config for Slave 629 * @port_prep: Prepare the port with parameters 630 * @clk_stop: handle imp-def sequences before and after prepare and de-prepare 631 */ 632struct sdw_slave_ops { 633 int (*read_prop)(struct sdw_slave *sdw); 634 int (*interrupt_callback)(struct sdw_slave *slave, 635 struct sdw_slave_intr_status *status); 636 int (*update_status)(struct sdw_slave *slave, 637 enum sdw_slave_status status); 638 int (*bus_config)(struct sdw_slave *slave, 639 struct sdw_bus_params *params); 640 int (*port_prep)(struct sdw_slave *slave, 641 struct sdw_prepare_ch *prepare_ch, 642 enum sdw_port_prep_ops pre_ops); 643 int (*clk_stop)(struct sdw_slave *slave, 644 enum sdw_clk_stop_mode mode, 645 enum sdw_clk_stop_type type); 646 647}; 648 649/** 650 * struct sdw_slave - SoundWire Slave 651 * @id: MIPI device ID 652 * @dev: Linux device 653 * @irq: IRQ number 654 * @status: Status reported by the Slave 655 * @bus: Bus handle 656 * @prop: Slave properties 657 * @debugfs: Slave debugfs 658 * @node: node for bus list 659 * @port_ready: Port ready completion flag for each Slave port 660 * @m_port_map: static Master port map for each Slave port 661 * @dev_num: Current Device Number, values can be 0 or dev_num_sticky 662 * @dev_num_sticky: one-time static Device Number assigned by Bus 663 * @probed: boolean tracking driver state 664 * @enumeration_complete: completion utility to control potential races 665 * on startup between device enumeration and read/write access to the 666 * Slave device 667 * @initialization_complete: completion utility to control potential races 668 * on startup between device enumeration and settings being restored 669 * @unattach_request: mask field to keep track why the Slave re-attached and 670 * was re-initialized. This is useful to deal with potential race conditions 671 * between the Master suspending and the codec resuming, and make sure that 672 * when the Master triggered a reset the Slave is properly enumerated and 673 * initialized 674 * @first_interrupt_done: status flag tracking if the interrupt handling 675 * for a Slave happens for the first time after enumeration 676 * @is_mockup_device: status flag used to squelch errors in the command/control 677 * protocol for SoundWire mockup devices 678 * @sdw_dev_lock: mutex used to protect callbacks/remove races 679 */ 680struct sdw_slave { 681 struct sdw_slave_id id; 682 struct device dev; 683 int irq; 684 enum sdw_slave_status status; 685 struct sdw_bus *bus; 686 struct sdw_slave_prop prop; 687#ifdef CONFIG_DEBUG_FS 688 struct dentry *debugfs; 689#endif 690 struct list_head node; 691 struct completion port_ready[SDW_MAX_PORTS]; 692 unsigned int m_port_map[SDW_MAX_PORTS]; 693 u16 dev_num; 694 u16 dev_num_sticky; 695 bool probed; 696 struct completion enumeration_complete; 697 struct completion initialization_complete; 698 u32 unattach_request; 699 bool first_interrupt_done; 700 bool is_mockup_device; 701 struct mutex sdw_dev_lock; /* protect callbacks/remove races */ 702}; 703 704#define dev_to_sdw_dev(_dev) container_of(_dev, struct sdw_slave, dev) 705 706/** 707 * struct sdw_master_device - SoundWire 'Master Device' representation 708 * @dev: Linux device for this Master 709 * @bus: Bus handle shortcut 710 */ 711struct sdw_master_device { 712 struct device dev; 713 struct sdw_bus *bus; 714}; 715 716#define dev_to_sdw_master_device(d) \ 717 container_of(d, struct sdw_master_device, dev) 718 719struct sdw_driver { 720 const char *name; 721 722 int (*probe)(struct sdw_slave *sdw, 723 const struct sdw_device_id *id); 724 int (*remove)(struct sdw_slave *sdw); 725 void (*shutdown)(struct sdw_slave *sdw); 726 727 const struct sdw_device_id *id_table; 728 const struct sdw_slave_ops *ops; 729 730 struct device_driver driver; 731}; 732 733#define SDW_SLAVE_ENTRY_EXT(_mfg_id, _part_id, _version, _c_id, _drv_data) \ 734 { .mfg_id = (_mfg_id), .part_id = (_part_id), \ 735 .sdw_version = (_version), .class_id = (_c_id), \ 736 .driver_data = (unsigned long)(_drv_data) } 737 738#define SDW_SLAVE_ENTRY(_mfg_id, _part_id, _drv_data) \ 739 SDW_SLAVE_ENTRY_EXT((_mfg_id), (_part_id), 0, 0, (_drv_data)) 740 741int sdw_handle_slave_status(struct sdw_bus *bus, 742 enum sdw_slave_status status[]); 743 744/* 745 * SDW master structures and APIs 746 */ 747 748/** 749 * struct sdw_port_params: Data Port parameters 750 * 751 * @num: Port number 752 * @bps: Word length of the Port 753 * @flow_mode: Port Data flow mode 754 * @data_mode: Test modes or normal mode 755 * 756 * This is used to program the Data Port based on Data Port stream 757 * parameters. 758 */ 759struct sdw_port_params { 760 unsigned int num; 761 unsigned int bps; 762 unsigned int flow_mode; 763 unsigned int data_mode; 764}; 765 766/** 767 * struct sdw_transport_params: Data Port Transport Parameters 768 * 769 * @blk_grp_ctrl_valid: Port implements block group control 770 * @num: Port number 771 * @blk_grp_ctrl: Block group control value 772 * @sample_interval: Sample interval 773 * @offset1: Blockoffset of the payload data 774 * @offset2: Blockoffset of the payload data 775 * @hstart: Horizontal start of the payload data 776 * @hstop: Horizontal stop of the payload data 777 * @blk_pkg_mode: Block per channel or block per port 778 * @lane_ctrl: Data lane Port uses for Data transfer. Currently only single 779 * data lane is supported in bus 780 * 781 * This is used to program the Data Port based on Data Port transport 782 * parameters. All these parameters are banked and can be modified 783 * during a bank switch without any artifacts in audio stream. 784 */ 785struct sdw_transport_params { 786 bool blk_grp_ctrl_valid; 787 unsigned int port_num; 788 unsigned int blk_grp_ctrl; 789 unsigned int sample_interval; 790 unsigned int offset1; 791 unsigned int offset2; 792 unsigned int hstart; 793 unsigned int hstop; 794 unsigned int blk_pkg_mode; 795 unsigned int lane_ctrl; 796}; 797 798/** 799 * struct sdw_enable_ch: Enable/disable Data Port channel 800 * 801 * @num: Port number 802 * @ch_mask: Active channel mask 803 * @enable: Enable (true) /disable (false) channel 804 */ 805struct sdw_enable_ch { 806 unsigned int port_num; 807 unsigned int ch_mask; 808 bool enable; 809}; 810 811/** 812 * struct sdw_master_port_ops: Callback functions from bus to Master 813 * driver to set Master Data ports. 814 * 815 * @dpn_set_port_params: Set the Port parameters for the Master Port. 816 * Mandatory callback 817 * @dpn_set_port_transport_params: Set transport parameters for the Master 818 * Port. Mandatory callback 819 * @dpn_port_prep: Port prepare operations for the Master Data Port. 820 * @dpn_port_enable_ch: Enable the channels of Master Port. 821 */ 822struct sdw_master_port_ops { 823 int (*dpn_set_port_params)(struct sdw_bus *bus, 824 struct sdw_port_params *port_params, 825 unsigned int bank); 826 int (*dpn_set_port_transport_params)(struct sdw_bus *bus, 827 struct sdw_transport_params *transport_params, 828 enum sdw_reg_bank bank); 829 int (*dpn_port_prep)(struct sdw_bus *bus, 830 struct sdw_prepare_ch *prepare_ch); 831 int (*dpn_port_enable_ch)(struct sdw_bus *bus, 832 struct sdw_enable_ch *enable_ch, unsigned int bank); 833}; 834 835struct sdw_msg; 836 837/** 838 * struct sdw_defer - SDW deffered message 839 * @length: message length 840 * @complete: message completion 841 * @msg: SDW message 842 */ 843struct sdw_defer { 844 int length; 845 struct completion complete; 846 struct sdw_msg *msg; 847}; 848 849/** 850 * struct sdw_master_ops - Master driver ops 851 * @read_prop: Read Master properties 852 * @override_adr: Override value read from firmware (quirk for buggy firmware) 853 * @xfer_msg: Transfer message callback 854 * @xfer_msg_defer: Defer version of transfer message callback. The message is handled with the 855 * bus struct @sdw_defer 856 * @set_bus_conf: Set the bus configuration 857 * @pre_bank_switch: Callback for pre bank switch 858 * @post_bank_switch: Callback for post bank switch 859 * @read_ping_status: Read status from PING frames, reported with two bits per Device. 860 * Bits 31:24 are reserved. 861 * @get_device_num: Callback for vendor-specific device_number allocation 862 * @put_device_num: Callback for vendor-specific device_number release 863 * @new_peripheral_assigned: Callback to handle enumeration of new peripheral. 864 */ 865struct sdw_master_ops { 866 int (*read_prop)(struct sdw_bus *bus); 867 u64 (*override_adr) 868 (struct sdw_bus *bus, u64 addr); 869 enum sdw_command_response (*xfer_msg) 870 (struct sdw_bus *bus, struct sdw_msg *msg); 871 enum sdw_command_response (*xfer_msg_defer) 872 (struct sdw_bus *bus); 873 int (*set_bus_conf)(struct sdw_bus *bus, 874 struct sdw_bus_params *params); 875 int (*pre_bank_switch)(struct sdw_bus *bus); 876 int (*post_bank_switch)(struct sdw_bus *bus); 877 u32 (*read_ping_status)(struct sdw_bus *bus); 878 int (*get_device_num)(struct sdw_bus *bus, struct sdw_slave *slave); 879 void (*put_device_num)(struct sdw_bus *bus, struct sdw_slave *slave); 880 void (*new_peripheral_assigned)(struct sdw_bus *bus, 881 struct sdw_slave *slave, 882 int dev_num); 883}; 884 885/** 886 * struct sdw_bus - SoundWire bus 887 * @dev: Shortcut to &bus->md->dev to avoid changing the entire code. 888 * @md: Master device 889 * @controller_id: system-unique controller ID. If set to -1, the bus @id will be used. 890 * @link_id: Link id number, can be 0 to N, unique for each Controller 891 * @id: bus system-wide unique id 892 * @slaves: list of Slaves on this bus 893 * @assigned: Bitmap for Slave device numbers. 894 * Bit set implies used number, bit clear implies unused number. 895 * @bus_lock: bus lock 896 * @msg_lock: message lock 897 * @compute_params: points to Bus resource management implementation 898 * @ops: Master callback ops 899 * @port_ops: Master port callback ops 900 * @params: Current bus parameters 901 * @prop: Master properties 902 * @m_rt_list: List of Master instance of all stream(s) running on Bus. This 903 * is used to compute and program bus bandwidth, clock, frame shape, 904 * transport and port parameters 905 * @debugfs: Bus debugfs 906 * @domain: IRQ domain 907 * @defer_msg: Defer message 908 * @clk_stop_timeout: Clock stop timeout computed 909 * @bank_switch_timeout: Bank switch timeout computed 910 * @multi_link: Store bus property that indicates if multi links 911 * are supported. This flag is populated by drivers after reading 912 * appropriate firmware (ACPI/DT). 913 * @hw_sync_min_links: Number of links used by a stream above which 914 * hardware-based synchronization is required. This value is only 915 * meaningful if multi_link is set. If set to 1, hardware-based 916 * synchronization will be used even if a stream only uses a single 917 * SoundWire segment. 918 */ 919struct sdw_bus { 920 struct device *dev; 921 struct sdw_master_device *md; 922 int controller_id; 923 unsigned int link_id; 924 int id; 925 struct list_head slaves; 926 DECLARE_BITMAP(assigned, SDW_MAX_DEVICES); 927 struct mutex bus_lock; 928 struct lock_class_key bus_lock_key; 929 struct mutex msg_lock; 930 struct lock_class_key msg_lock_key; 931 int (*compute_params)(struct sdw_bus *bus); 932 const struct sdw_master_ops *ops; 933 const struct sdw_master_port_ops *port_ops; 934 struct sdw_bus_params params; 935 struct sdw_master_prop prop; 936 struct list_head m_rt_list; 937#ifdef CONFIG_DEBUG_FS 938 struct dentry *debugfs; 939#endif 940 struct irq_chip irq_chip; 941 struct irq_domain *domain; 942 struct sdw_defer defer_msg; 943 unsigned int clk_stop_timeout; 944 u32 bank_switch_timeout; 945 bool multi_link; 946 int hw_sync_min_links; 947}; 948 949int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent, 950 struct fwnode_handle *fwnode); 951void sdw_bus_master_delete(struct sdw_bus *bus); 952 953void sdw_show_ping_status(struct sdw_bus *bus, bool sync_delay); 954 955/** 956 * sdw_port_config: Master or Slave Port configuration 957 * 958 * @num: Port number 959 * @ch_mask: channels mask for port 960 */ 961struct sdw_port_config { 962 unsigned int num; 963 unsigned int ch_mask; 964}; 965 966/** 967 * sdw_stream_config: Master or Slave stream configuration 968 * 969 * @frame_rate: Audio frame rate of the stream, in Hz 970 * @ch_count: Channel count of the stream 971 * @bps: Number of bits per audio sample 972 * @direction: Data direction 973 * @type: Stream type PCM or PDM 974 */ 975struct sdw_stream_config { 976 unsigned int frame_rate; 977 unsigned int ch_count; 978 unsigned int bps; 979 enum sdw_data_direction direction; 980 enum sdw_stream_type type; 981}; 982 983/** 984 * sdw_stream_state: Stream states 985 * 986 * @SDW_STREAM_ALLOCATED: New stream allocated. 987 * @SDW_STREAM_CONFIGURED: Stream configured 988 * @SDW_STREAM_PREPARED: Stream prepared 989 * @SDW_STREAM_ENABLED: Stream enabled 990 * @SDW_STREAM_DISABLED: Stream disabled 991 * @SDW_STREAM_DEPREPARED: Stream de-prepared 992 * @SDW_STREAM_RELEASED: Stream released 993 */ 994enum sdw_stream_state { 995 SDW_STREAM_ALLOCATED = 0, 996 SDW_STREAM_CONFIGURED = 1, 997 SDW_STREAM_PREPARED = 2, 998 SDW_STREAM_ENABLED = 3, 999 SDW_STREAM_DISABLED = 4, 1000 SDW_STREAM_DEPREPARED = 5, 1001 SDW_STREAM_RELEASED = 6, 1002}; 1003 1004/** 1005 * sdw_stream_params: Stream parameters 1006 * 1007 * @rate: Sampling frequency, in Hz 1008 * @ch_count: Number of channels 1009 * @bps: bits per channel sample 1010 */ 1011struct sdw_stream_params { 1012 unsigned int rate; 1013 unsigned int ch_count; 1014 unsigned int bps; 1015}; 1016 1017/** 1018 * sdw_stream_runtime: Runtime stream parameters 1019 * 1020 * @name: SoundWire stream name 1021 * @params: Stream parameters 1022 * @state: Current state of the stream 1023 * @type: Stream type PCM or PDM 1024 * @master_list: List of Master runtime(s) in this stream. 1025 * master_list can contain only one m_rt per Master instance 1026 * for a stream 1027 * @m_rt_count: Count of Master runtime(s) in this stream 1028 */ 1029struct sdw_stream_runtime { 1030 const char *name; 1031 struct sdw_stream_params params; 1032 enum sdw_stream_state state; 1033 enum sdw_stream_type type; 1034 struct list_head master_list; 1035 int m_rt_count; 1036}; 1037 1038struct sdw_stream_runtime *sdw_alloc_stream(const char *stream_name); 1039void sdw_release_stream(struct sdw_stream_runtime *stream); 1040 1041int sdw_compute_params(struct sdw_bus *bus); 1042 1043int sdw_stream_add_master(struct sdw_bus *bus, 1044 struct sdw_stream_config *stream_config, 1045 const struct sdw_port_config *port_config, 1046 unsigned int num_ports, 1047 struct sdw_stream_runtime *stream); 1048int sdw_stream_remove_master(struct sdw_bus *bus, 1049 struct sdw_stream_runtime *stream); 1050int sdw_startup_stream(void *sdw_substream); 1051int sdw_prepare_stream(struct sdw_stream_runtime *stream); 1052int sdw_enable_stream(struct sdw_stream_runtime *stream); 1053int sdw_disable_stream(struct sdw_stream_runtime *stream); 1054int sdw_deprepare_stream(struct sdw_stream_runtime *stream); 1055void sdw_shutdown_stream(void *sdw_substream); 1056int sdw_bus_prep_clk_stop(struct sdw_bus *bus); 1057int sdw_bus_clk_stop(struct sdw_bus *bus); 1058int sdw_bus_exit_clk_stop(struct sdw_bus *bus); 1059 1060int sdw_compare_devid(struct sdw_slave *slave, struct sdw_slave_id id); 1061void sdw_extract_slave_id(struct sdw_bus *bus, u64 addr, struct sdw_slave_id *id); 1062 1063#if IS_ENABLED(CONFIG_SOUNDWIRE) 1064 1065int sdw_stream_add_slave(struct sdw_slave *slave, 1066 struct sdw_stream_config *stream_config, 1067 const struct sdw_port_config *port_config, 1068 unsigned int num_ports, 1069 struct sdw_stream_runtime *stream); 1070int sdw_stream_remove_slave(struct sdw_slave *slave, 1071 struct sdw_stream_runtime *stream); 1072 1073/* messaging and data APIs */ 1074int sdw_read(struct sdw_slave *slave, u32 addr); 1075int sdw_write(struct sdw_slave *slave, u32 addr, u8 value); 1076int sdw_write_no_pm(struct sdw_slave *slave, u32 addr, u8 value); 1077int sdw_read_no_pm(struct sdw_slave *slave, u32 addr); 1078int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val); 1079int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val); 1080int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val); 1081int sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val); 1082int sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val); 1083int sdw_update_no_pm(struct sdw_slave *slave, u32 addr, u8 mask, u8 val); 1084 1085#else 1086 1087static inline int sdw_stream_add_slave(struct sdw_slave *slave, 1088 struct sdw_stream_config *stream_config, 1089 const struct sdw_port_config *port_config, 1090 unsigned int num_ports, 1091 struct sdw_stream_runtime *stream) 1092{ 1093 WARN_ONCE(1, "SoundWire API is disabled"); 1094 return -EINVAL; 1095} 1096 1097static inline int sdw_stream_remove_slave(struct sdw_slave *slave, 1098 struct sdw_stream_runtime *stream) 1099{ 1100 WARN_ONCE(1, "SoundWire API is disabled"); 1101 return -EINVAL; 1102} 1103 1104/* messaging and data APIs */ 1105static inline int sdw_read(struct sdw_slave *slave, u32 addr) 1106{ 1107 WARN_ONCE(1, "SoundWire API is disabled"); 1108 return -EINVAL; 1109} 1110 1111static inline int sdw_write(struct sdw_slave *slave, u32 addr, u8 value) 1112{ 1113 WARN_ONCE(1, "SoundWire API is disabled"); 1114 return -EINVAL; 1115} 1116 1117static inline int sdw_write_no_pm(struct sdw_slave *slave, u32 addr, u8 value) 1118{ 1119 WARN_ONCE(1, "SoundWire API is disabled"); 1120 return -EINVAL; 1121} 1122 1123static inline int sdw_read_no_pm(struct sdw_slave *slave, u32 addr) 1124{ 1125 WARN_ONCE(1, "SoundWire API is disabled"); 1126 return -EINVAL; 1127} 1128 1129static inline int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val) 1130{ 1131 WARN_ONCE(1, "SoundWire API is disabled"); 1132 return -EINVAL; 1133} 1134 1135static inline int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val) 1136{ 1137 WARN_ONCE(1, "SoundWire API is disabled"); 1138 return -EINVAL; 1139} 1140 1141static inline int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val) 1142{ 1143 WARN_ONCE(1, "SoundWire API is disabled"); 1144 return -EINVAL; 1145} 1146 1147static inline int sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val) 1148{ 1149 WARN_ONCE(1, "SoundWire API is disabled"); 1150 return -EINVAL; 1151} 1152 1153static inline int sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val) 1154{ 1155 WARN_ONCE(1, "SoundWire API is disabled"); 1156 return -EINVAL; 1157} 1158 1159static inline int sdw_update_no_pm(struct sdw_slave *slave, u32 addr, u8 mask, u8 val) 1160{ 1161 WARN_ONCE(1, "SoundWire API is disabled"); 1162 return -EINVAL; 1163} 1164 1165#endif /* CONFIG_SOUNDWIRE */ 1166 1167#endif /* __SOUNDWIRE_H */ 1168