1/* 2 * Remote Processor Framework 3 * 4 * Copyright(c) 2011 Texas Instruments, Inc. 5 * Copyright(c) 2011 Google, Inc. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 12 * * Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * * Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in 16 * the documentation and/or other materials provided with the 17 * distribution. 18 * * Neither the name Texas Instruments nor the names of its 19 * contributors may be used to endorse or promote products derived 20 * from this software without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 23 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 24 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 25 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 26 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 27 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 28 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 29 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 30 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 32 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35#ifndef REMOTEPROC_H 36#define REMOTEPROC_H 37 38#include <linux/types.h> 39#include <linux/mutex.h> 40#include <linux/virtio.h> 41#include <linux/cdev.h> 42#include <linux/completion.h> 43#include <linux/idr.h> 44#include <linux/of.h> 45 46/** 47 * struct resource_table - firmware resource table header 48 * @ver: version number 49 * @num: number of resource entries 50 * @reserved: reserved (must be zero) 51 * @offset: array of offsets pointing at the various resource entries 52 * 53 * A resource table is essentially a list of system resources required 54 * by the remote processor. It may also include configuration entries. 55 * If needed, the remote processor firmware should contain this table 56 * as a dedicated ".resource_table" ELF section. 57 * 58 * Some resources entries are mere announcements, where the host is informed 59 * of specific remoteproc configuration. Other entries require the host to 60 * do something (e.g. allocate a system resource). Sometimes a negotiation 61 * is expected, where the firmware requests a resource, and once allocated, 62 * the host should provide back its details (e.g. address of an allocated 63 * memory region). 64 * 65 * The header of the resource table, as expressed by this structure, 66 * contains a version number (should we need to change this format in the 67 * future), the number of available resource entries, and their offsets 68 * in the table. 69 * 70 * Immediately following this header are the resource entries themselves, 71 * each of which begins with a resource entry header (as described below). 72 */ 73struct resource_table { 74 u32 ver; 75 u32 num; 76 u32 reserved[2]; 77 u32 offset[]; 78} __packed; 79 80/** 81 * struct fw_rsc_hdr - firmware resource entry header 82 * @type: resource type 83 * @data: resource data 84 * 85 * Every resource entry begins with a 'struct fw_rsc_hdr' header providing 86 * its @type. The content of the entry itself will immediately follow 87 * this header, and it should be parsed according to the resource type. 88 */ 89struct fw_rsc_hdr { 90 u32 type; 91 u8 data[]; 92} __packed; 93 94/** 95 * enum fw_resource_type - types of resource entries 96 * 97 * @RSC_CARVEOUT: request for allocation of a physically contiguous 98 * memory region. 99 * @RSC_DEVMEM: request to iommu_map a memory-based peripheral. 100 * @RSC_TRACE: announces the availability of a trace buffer into which 101 * the remote processor will be writing logs. 102 * @RSC_VDEV: declare support for a virtio device, and serve as its 103 * virtio header. 104 * @RSC_LAST: just keep this one at the end of standard resources 105 * @RSC_VENDOR_START: start of the vendor specific resource types range 106 * @RSC_VENDOR_END: end of the vendor specific resource types range 107 * 108 * For more details regarding a specific resource type, please see its 109 * dedicated structure below. 110 * 111 * Please note that these values are used as indices to the rproc_handle_rsc 112 * lookup table, so please keep them sane. Moreover, @RSC_LAST is used to 113 * check the validity of an index before the lookup table is accessed, so 114 * please update it as needed. 115 */ 116enum fw_resource_type { 117 RSC_CARVEOUT = 0, 118 RSC_DEVMEM = 1, 119 RSC_TRACE = 2, 120 RSC_VDEV = 3, 121 RSC_LAST = 4, 122 RSC_VENDOR_START = 128, 123 RSC_VENDOR_END = 512, 124}; 125 126#define FW_RSC_ADDR_ANY (-1) 127 128/** 129 * struct fw_rsc_carveout - physically contiguous memory request 130 * @da: device address 131 * @pa: physical address 132 * @len: length (in bytes) 133 * @flags: iommu protection flags 134 * @reserved: reserved (must be zero) 135 * @name: human-readable name of the requested memory region 136 * 137 * This resource entry requests the host to allocate a physically contiguous 138 * memory region. 139 * 140 * These request entries should precede other firmware resource entries, 141 * as other entries might request placing other data objects inside 142 * these memory regions (e.g. data/code segments, trace resource entries, ...). 143 * 144 * Allocating memory this way helps utilizing the reserved physical memory 145 * (e.g. CMA) more efficiently, and also minimizes the number of TLB entries 146 * needed to map it (in case @rproc is using an IOMMU). Reducing the TLB 147 * pressure is important; it may have a substantial impact on performance. 148 * 149 * If the firmware is compiled with static addresses, then @da should specify 150 * the expected device address of this memory region. If @da is set to 151 * FW_RSC_ADDR_ANY, then the host will dynamically allocate it, and then 152 * overwrite @da with the dynamically allocated address. 153 * 154 * We will always use @da to negotiate the device addresses, even if it 155 * isn't using an iommu. In that case, though, it will obviously contain 156 * physical addresses. 157 * 158 * Some remote processors needs to know the allocated physical address 159 * even if they do use an iommu. This is needed, e.g., if they control 160 * hardware accelerators which access the physical memory directly (this 161 * is the case with OMAP4 for instance). In that case, the host will 162 * overwrite @pa with the dynamically allocated physical address. 163 * Generally we don't want to expose physical addresses if we don't have to 164 * (remote processors are generally _not_ trusted), so we might want to 165 * change this to happen _only_ when explicitly required by the hardware. 166 * 167 * @flags is used to provide IOMMU protection flags, and @name should 168 * (optionally) contain a human readable name of this carveout region 169 * (mainly for debugging purposes). 170 */ 171struct fw_rsc_carveout { 172 u32 da; 173 u32 pa; 174 u32 len; 175 u32 flags; 176 u32 reserved; 177 u8 name[32]; 178} __packed; 179 180/** 181 * struct fw_rsc_devmem - iommu mapping request 182 * @da: device address 183 * @pa: physical address 184 * @len: length (in bytes) 185 * @flags: iommu protection flags 186 * @reserved: reserved (must be zero) 187 * @name: human-readable name of the requested region to be mapped 188 * 189 * This resource entry requests the host to iommu map a physically contiguous 190 * memory region. This is needed in case the remote processor requires 191 * access to certain memory-based peripherals; _never_ use it to access 192 * regular memory. 193 * 194 * This is obviously only needed if the remote processor is accessing memory 195 * via an iommu. 196 * 197 * @da should specify the required device address, @pa should specify 198 * the physical address we want to map, @len should specify the size of 199 * the mapping and @flags is the IOMMU protection flags. As always, @name may 200 * (optionally) contain a human readable name of this mapping (mainly for 201 * debugging purposes). 202 * 203 * Note: at this point we just "trust" those devmem entries to contain valid 204 * physical addresses, but this isn't safe and will be changed: eventually we 205 * want remoteproc implementations to provide us ranges of physical addresses 206 * the firmware is allowed to request, and not allow firmwares to request 207 * access to physical addresses that are outside those ranges. 208 */ 209struct fw_rsc_devmem { 210 u32 da; 211 u32 pa; 212 u32 len; 213 u32 flags; 214 u32 reserved; 215 u8 name[32]; 216} __packed; 217 218/** 219 * struct fw_rsc_trace - trace buffer declaration 220 * @da: device address 221 * @len: length (in bytes) 222 * @reserved: reserved (must be zero) 223 * @name: human-readable name of the trace buffer 224 * 225 * This resource entry provides the host information about a trace buffer 226 * into which the remote processor will write log messages. 227 * 228 * @da specifies the device address of the buffer, @len specifies 229 * its size, and @name may contain a human readable name of the trace buffer. 230 * 231 * After booting the remote processor, the trace buffers are exposed to the 232 * user via debugfs entries (called trace0, trace1, etc..). 233 */ 234struct fw_rsc_trace { 235 u32 da; 236 u32 len; 237 u32 reserved; 238 u8 name[32]; 239} __packed; 240 241/** 242 * struct fw_rsc_vdev_vring - vring descriptor entry 243 * @da: device address 244 * @align: the alignment between the consumer and producer parts of the vring 245 * @num: num of buffers supported by this vring (must be power of two) 246 * @notifyid: a unique rproc-wide notify index for this vring. This notify 247 * index is used when kicking a remote processor, to let it know that this 248 * vring is triggered. 249 * @pa: physical address 250 * 251 * This descriptor is not a resource entry by itself; it is part of the 252 * vdev resource type (see below). 253 * 254 * Note that @da should either contain the device address where 255 * the remote processor is expecting the vring, or indicate that 256 * dynamically allocation of the vring's device address is supported. 257 */ 258struct fw_rsc_vdev_vring { 259 u32 da; 260 u32 align; 261 u32 num; 262 u32 notifyid; 263 u32 pa; 264} __packed; 265 266/** 267 * struct fw_rsc_vdev - virtio device header 268 * @id: virtio device id (as in virtio_ids.h) 269 * @notifyid: a unique rproc-wide notify index for this vdev. This notify 270 * index is used when kicking a remote processor, to let it know that the 271 * status/features of this vdev have changes. 272 * @dfeatures: specifies the virtio device features supported by the firmware 273 * @gfeatures: a place holder used by the host to write back the 274 * negotiated features that are supported by both sides. 275 * @config_len: the size of the virtio config space of this vdev. The config 276 * space lies in the resource table immediate after this vdev header. 277 * @status: a place holder where the host will indicate its virtio progress. 278 * @num_of_vrings: indicates how many vrings are described in this vdev header 279 * @reserved: reserved (must be zero) 280 * @vring: an array of @num_of_vrings entries of 'struct fw_rsc_vdev_vring'. 281 * 282 * This resource is a virtio device header: it provides information about 283 * the vdev, and is then used by the host and its peer remote processors 284 * to negotiate and share certain virtio properties. 285 * 286 * By providing this resource entry, the firmware essentially asks remoteproc 287 * to statically allocate a vdev upon registration of the rproc (dynamic vdev 288 * allocation is not yet supported). 289 * 290 * Note: 291 * 1. unlike virtualization systems, the term 'host' here means 292 * the Linux side which is running remoteproc to control the remote 293 * processors. We use the name 'gfeatures' to comply with virtio's terms, 294 * though there isn't really any virtualized guest OS here: it's the host 295 * which is responsible for negotiating the final features. 296 * Yeah, it's a bit confusing. 297 * 298 * 2. immediately following this structure is the virtio config space for 299 * this vdev (which is specific to the vdev; for more info, read the virtio 300 * spec). The size of the config space is specified by @config_len. 301 */ 302struct fw_rsc_vdev { 303 u32 id; 304 u32 notifyid; 305 u32 dfeatures; 306 u32 gfeatures; 307 u32 config_len; 308 u8 status; 309 u8 num_of_vrings; 310 u8 reserved[2]; 311 struct fw_rsc_vdev_vring vring[]; 312} __packed; 313 314struct rproc; 315 316/** 317 * struct rproc_mem_entry - memory entry descriptor 318 * @va: virtual address 319 * @is_iomem: io memory 320 * @dma: dma address 321 * @len: length, in bytes 322 * @da: device address 323 * @release: release associated memory 324 * @priv: associated data 325 * @name: associated memory region name (optional) 326 * @node: list node 327 * @rsc_offset: offset in resource table 328 * @flags: iommu protection flags 329 * @of_resm_idx: reserved memory phandle index 330 * @alloc: specific memory allocator function 331 */ 332struct rproc_mem_entry { 333 void *va; 334 bool is_iomem; 335 dma_addr_t dma; 336 size_t len; 337 u32 da; 338 void *priv; 339 char name[32]; 340 struct list_head node; 341 u32 rsc_offset; 342 u32 flags; 343 u32 of_resm_idx; 344 int (*alloc)(struct rproc *rproc, struct rproc_mem_entry *mem); 345 int (*release)(struct rproc *rproc, struct rproc_mem_entry *mem); 346}; 347 348struct firmware; 349 350/** 351 * enum rsc_handling_status - return status of rproc_ops handle_rsc hook 352 * @RSC_HANDLED: resource was handled 353 * @RSC_IGNORED: resource was ignored 354 */ 355enum rsc_handling_status { 356 RSC_HANDLED = 0, 357 RSC_IGNORED = 1, 358}; 359 360/** 361 * struct rproc_ops - platform-specific device handlers 362 * @prepare: prepare device for code loading 363 * @unprepare: unprepare device after stop 364 * @start: power on the device and boot it 365 * @stop: power off the device 366 * @attach: attach to a device that his already powered up 367 * @detach: detach from a device, leaving it powered up 368 * @kick: kick a virtqueue (virtqueue id given as a parameter) 369 * @da_to_va: optional platform hook to perform address translations 370 * @parse_fw: parse firmware to extract information (e.g. resource table) 371 * @handle_rsc: optional platform hook to handle vendor resources. Should return 372 * RSC_HANDLED if resource was handled, RSC_IGNORED if not handled 373 * and a negative value on error 374 * @find_loaded_rsc_table: find the loaded resource table from firmware image 375 * @get_loaded_rsc_table: get resource table installed in memory 376 * by external entity 377 * @load: load firmware to memory, where the remote processor 378 * expects to find it 379 * @sanity_check: sanity check the fw image 380 * @get_boot_addr: get boot address to entry point specified in firmware 381 * @panic: optional callback to react to system panic, core will delay 382 * panic at least the returned number of milliseconds 383 * @coredump: collect firmware dump after the subsystem is shutdown 384 */ 385struct rproc_ops { 386 int (*prepare)(struct rproc *rproc); 387 int (*unprepare)(struct rproc *rproc); 388 int (*start)(struct rproc *rproc); 389 int (*stop)(struct rproc *rproc); 390 int (*attach)(struct rproc *rproc); 391 int (*detach)(struct rproc *rproc); 392 void (*kick)(struct rproc *rproc, int vqid); 393 void * (*da_to_va)(struct rproc *rproc, u64 da, size_t len, bool *is_iomem); 394 int (*parse_fw)(struct rproc *rproc, const struct firmware *fw); 395 int (*handle_rsc)(struct rproc *rproc, u32 rsc_type, void *rsc, 396 int offset, int avail); 397 struct resource_table *(*find_loaded_rsc_table)( 398 struct rproc *rproc, const struct firmware *fw); 399 struct resource_table *(*get_loaded_rsc_table)( 400 struct rproc *rproc, size_t *size); 401 int (*load)(struct rproc *rproc, const struct firmware *fw); 402 int (*sanity_check)(struct rproc *rproc, const struct firmware *fw); 403 u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw); 404 unsigned long (*panic)(struct rproc *rproc); 405 void (*coredump)(struct rproc *rproc); 406}; 407 408/** 409 * enum rproc_state - remote processor states 410 * @RPROC_OFFLINE: device is powered off 411 * @RPROC_SUSPENDED: device is suspended; needs to be woken up to receive 412 * a message. 413 * @RPROC_RUNNING: device is up and running 414 * @RPROC_CRASHED: device has crashed; need to start recovery 415 * @RPROC_DELETED: device is deleted 416 * @RPROC_ATTACHED: device has been booted by another entity and the core 417 * has attached to it 418 * @RPROC_DETACHED: device has been booted by another entity and waiting 419 * for the core to attach to it 420 * @RPROC_LAST: just keep this one at the end 421 * 422 * Please note that the values of these states are used as indices 423 * to rproc_state_string, a state-to-name lookup table, 424 * so please keep the two synchronized. @RPROC_LAST is used to check 425 * the validity of an index before the lookup table is accessed, so 426 * please update it as needed too. 427 */ 428enum rproc_state { 429 RPROC_OFFLINE = 0, 430 RPROC_SUSPENDED = 1, 431 RPROC_RUNNING = 2, 432 RPROC_CRASHED = 3, 433 RPROC_DELETED = 4, 434 RPROC_ATTACHED = 5, 435 RPROC_DETACHED = 6, 436 RPROC_LAST = 7, 437}; 438 439/** 440 * enum rproc_crash_type - remote processor crash types 441 * @RPROC_MMUFAULT: iommu fault 442 * @RPROC_WATCHDOG: watchdog bite 443 * @RPROC_FATAL_ERROR: fatal error 444 * 445 * Each element of the enum is used as an array index. So that, the value of 446 * the elements should be always something sane. 447 * 448 * Feel free to add more types when needed. 449 */ 450enum rproc_crash_type { 451 RPROC_MMUFAULT, 452 RPROC_WATCHDOG, 453 RPROC_FATAL_ERROR, 454}; 455 456/** 457 * enum rproc_dump_mechanism - Coredump options for core 458 * @RPROC_COREDUMP_DISABLED: Don't perform any dump 459 * @RPROC_COREDUMP_ENABLED: Copy dump to separate buffer and carry on with 460 * recovery 461 * @RPROC_COREDUMP_INLINE: Read segments directly from device memory. Stall 462 * recovery until all segments are read 463 */ 464enum rproc_dump_mechanism { 465 RPROC_COREDUMP_DISABLED, 466 RPROC_COREDUMP_ENABLED, 467 RPROC_COREDUMP_INLINE, 468}; 469 470/** 471 * struct rproc_dump_segment - segment info from ELF header 472 * @node: list node related to the rproc segment list 473 * @da: device address of the segment 474 * @size: size of the segment 475 * @priv: private data associated with the dump_segment 476 * @dump: custom dump function to fill device memory segment associated 477 * with coredump 478 * @offset: offset of the segment 479 */ 480struct rproc_dump_segment { 481 struct list_head node; 482 483 dma_addr_t da; 484 size_t size; 485 486 void *priv; 487 void (*dump)(struct rproc *rproc, struct rproc_dump_segment *segment, 488 void *dest, size_t offset, size_t size); 489 loff_t offset; 490}; 491 492/** 493 * enum rproc_features - features supported 494 * 495 * @RPROC_FEAT_ATTACH_ON_RECOVERY: The remote processor does not need help 496 * from Linux to recover, such as firmware 497 * loading. Linux just needs to attach after 498 * recovery. 499 */ 500 501enum rproc_features { 502 RPROC_FEAT_ATTACH_ON_RECOVERY, 503 RPROC_MAX_FEATURES, 504}; 505 506/** 507 * struct rproc - represents a physical remote processor device 508 * @node: list node of this rproc object 509 * @domain: iommu domain 510 * @name: human readable name of the rproc 511 * @firmware: name of firmware file to be loaded 512 * @priv: private data which belongs to the platform-specific rproc module 513 * @ops: platform-specific start/stop rproc handlers 514 * @dev: virtual device for refcounting and common remoteproc behavior 515 * @power: refcount of users who need this rproc powered up 516 * @state: state of the device 517 * @dump_conf: Currently selected coredump configuration 518 * @lock: lock which protects concurrent manipulations of the rproc 519 * @dbg_dir: debugfs directory of this rproc device 520 * @traces: list of trace buffers 521 * @num_traces: number of trace buffers 522 * @carveouts: list of physically contiguous memory allocations 523 * @mappings: list of iommu mappings we initiated, needed on shutdown 524 * @bootaddr: address of first instruction to boot rproc with (optional) 525 * @rvdevs: list of remote virtio devices 526 * @subdevs: list of subdevices, to following the running state 527 * @notifyids: idr for dynamically assigning rproc-wide unique notify ids 528 * @index: index of this rproc device 529 * @crash_handler: workqueue for handling a crash 530 * @crash_cnt: crash counter 531 * @recovery_disabled: flag that state if recovery was disabled 532 * @max_notifyid: largest allocated notify id. 533 * @table_ptr: pointer to the resource table in effect 534 * @clean_table: copy of the resource table without modifications. Used 535 * when a remote processor is attached or detached from the core 536 * @cached_table: copy of the resource table 537 * @table_sz: size of @cached_table 538 * @has_iommu: flag to indicate if remote processor is behind an MMU 539 * @auto_boot: flag to indicate if remote processor should be auto-started 540 * @sysfs_read_only: flag to make remoteproc sysfs files read only 541 * @dump_segments: list of segments in the firmware 542 * @nb_vdev: number of vdev currently handled by rproc 543 * @elf_class: firmware ELF class 544 * @elf_machine: firmware ELF machine 545 * @cdev: character device of the rproc 546 * @cdev_put_on_release: flag to indicate if remoteproc should be shutdown on @char_dev release 547 * @features: indicate remoteproc features 548 */ 549struct rproc { 550 struct list_head node; 551 struct iommu_domain *domain; 552 const char *name; 553 const char *firmware; 554 void *priv; 555 struct rproc_ops *ops; 556 struct device dev; 557 atomic_t power; 558 unsigned int state; 559 enum rproc_dump_mechanism dump_conf; 560 struct mutex lock; 561 struct dentry *dbg_dir; 562 struct list_head traces; 563 int num_traces; 564 struct list_head carveouts; 565 struct list_head mappings; 566 u64 bootaddr; 567 struct list_head rvdevs; 568 struct list_head subdevs; 569 struct idr notifyids; 570 int index; 571 struct work_struct crash_handler; 572 unsigned int crash_cnt; 573 bool recovery_disabled; 574 int max_notifyid; 575 struct resource_table *table_ptr; 576 struct resource_table *clean_table; 577 struct resource_table *cached_table; 578 size_t table_sz; 579 bool has_iommu; 580 bool auto_boot; 581 bool sysfs_read_only; 582 struct list_head dump_segments; 583 int nb_vdev; 584 u8 elf_class; 585 u16 elf_machine; 586 struct cdev cdev; 587 bool cdev_put_on_release; 588 DECLARE_BITMAP(features, RPROC_MAX_FEATURES); 589}; 590 591/** 592 * struct rproc_subdev - subdevice tied to a remoteproc 593 * @node: list node related to the rproc subdevs list 594 * @prepare: prepare function, called before the rproc is started 595 * @start: start function, called after the rproc has been started 596 * @stop: stop function, called before the rproc is stopped; the @crashed 597 * parameter indicates if this originates from a recovery 598 * @unprepare: unprepare function, called after the rproc has been stopped 599 */ 600struct rproc_subdev { 601 struct list_head node; 602 603 int (*prepare)(struct rproc_subdev *subdev); 604 int (*start)(struct rproc_subdev *subdev); 605 void (*stop)(struct rproc_subdev *subdev, bool crashed); 606 void (*unprepare)(struct rproc_subdev *subdev); 607}; 608 609/* we currently support only two vrings per rvdev */ 610 611#define RVDEV_NUM_VRINGS 2 612 613/** 614 * struct rproc_vring - remoteproc vring state 615 * @va: virtual address 616 * @num: vring size 617 * @da: device address 618 * @align: vring alignment 619 * @notifyid: rproc-specific unique vring index 620 * @rvdev: remote vdev 621 * @vq: the virtqueue of this vring 622 */ 623struct rproc_vring { 624 void *va; 625 int num; 626 u32 da; 627 u32 align; 628 int notifyid; 629 struct rproc_vdev *rvdev; 630 struct virtqueue *vq; 631}; 632 633/** 634 * struct rproc_vdev - remoteproc state for a supported virtio device 635 * @subdev: handle for registering the vdev as a rproc subdevice 636 * @pdev: remoteproc virtio platform device 637 * @id: virtio device id (as in virtio_ids.h) 638 * @node: list node 639 * @rproc: the rproc handle 640 * @vring: the vrings for this vdev 641 * @rsc_offset: offset of the vdev's resource entry 642 * @index: vdev position versus other vdev declared in resource table 643 */ 644struct rproc_vdev { 645 646 struct rproc_subdev subdev; 647 struct platform_device *pdev; 648 649 unsigned int id; 650 struct list_head node; 651 struct rproc *rproc; 652 struct rproc_vring vring[RVDEV_NUM_VRINGS]; 653 u32 rsc_offset; 654 u32 index; 655}; 656 657struct rproc *rproc_get_by_phandle(phandle phandle); 658struct rproc *rproc_get_by_child(struct device *dev); 659 660struct rproc *rproc_alloc(struct device *dev, const char *name, 661 const struct rproc_ops *ops, 662 const char *firmware, int len); 663void rproc_put(struct rproc *rproc); 664int rproc_add(struct rproc *rproc); 665int rproc_del(struct rproc *rproc); 666void rproc_free(struct rproc *rproc); 667void rproc_resource_cleanup(struct rproc *rproc); 668 669struct rproc *devm_rproc_alloc(struct device *dev, const char *name, 670 const struct rproc_ops *ops, 671 const char *firmware, int len); 672int devm_rproc_add(struct device *dev, struct rproc *rproc); 673 674void rproc_add_carveout(struct rproc *rproc, struct rproc_mem_entry *mem); 675 676struct rproc_mem_entry * 677rproc_mem_entry_init(struct device *dev, 678 void *va, dma_addr_t dma, size_t len, u32 da, 679 int (*alloc)(struct rproc *, struct rproc_mem_entry *), 680 int (*release)(struct rproc *, struct rproc_mem_entry *), 681 const char *name, ...); 682 683struct rproc_mem_entry * 684rproc_of_resm_mem_entry_init(struct device *dev, u32 of_resm_idx, size_t len, 685 u32 da, const char *name, ...); 686 687int rproc_boot(struct rproc *rproc); 688int rproc_shutdown(struct rproc *rproc); 689int rproc_detach(struct rproc *rproc); 690int rproc_set_firmware(struct rproc *rproc, const char *fw_name); 691void rproc_report_crash(struct rproc *rproc, enum rproc_crash_type type); 692void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem); 693 694/* from remoteproc_coredump.c */ 695void rproc_coredump_cleanup(struct rproc *rproc); 696void rproc_coredump(struct rproc *rproc); 697void rproc_coredump_using_sections(struct rproc *rproc); 698int rproc_coredump_add_segment(struct rproc *rproc, dma_addr_t da, size_t size); 699int rproc_coredump_add_custom_segment(struct rproc *rproc, 700 dma_addr_t da, size_t size, 701 void (*dumpfn)(struct rproc *rproc, 702 struct rproc_dump_segment *segment, 703 void *dest, size_t offset, 704 size_t size), 705 void *priv); 706int rproc_coredump_set_elf_info(struct rproc *rproc, u8 class, u16 machine); 707 708void rproc_add_subdev(struct rproc *rproc, struct rproc_subdev *subdev); 709 710void rproc_remove_subdev(struct rproc *rproc, struct rproc_subdev *subdev); 711 712#endif /* REMOTEPROC_H */ 713