1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * linux/mii.h: definitions for MII-compatible transceivers 4 * Originally drivers/net/sunhme.h. 5 * 6 * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com) 7 */ 8#ifndef __LINUX_MII_H__ 9#define __LINUX_MII_H__ 10 11 12#include <linux/if.h> 13#include <linux/linkmode.h> 14#include <uapi/linux/mii.h> 15 16struct ethtool_cmd; 17 18struct mii_if_info { 19 int phy_id; 20 int advertising; 21 int phy_id_mask; 22 int reg_num_mask; 23 24 unsigned int full_duplex : 1; /* is full duplex? */ 25 unsigned int force_media : 1; /* is autoneg. disabled? */ 26 unsigned int supports_gmii : 1; /* are GMII registers supported? */ 27 28 struct net_device *dev; 29 int (*mdio_read) (struct net_device *dev, int phy_id, int location); 30 void (*mdio_write) (struct net_device *dev, int phy_id, int location, int val); 31}; 32 33extern int mii_link_ok (struct mii_if_info *mii); 34extern int mii_nway_restart (struct mii_if_info *mii); 35extern void mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd); 36extern void mii_ethtool_get_link_ksettings( 37 struct mii_if_info *mii, struct ethtool_link_ksettings *cmd); 38extern int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd); 39extern int mii_ethtool_set_link_ksettings( 40 struct mii_if_info *mii, const struct ethtool_link_ksettings *cmd); 41extern int mii_check_gmii_support(struct mii_if_info *mii); 42extern void mii_check_link (struct mii_if_info *mii); 43extern unsigned int mii_check_media (struct mii_if_info *mii, 44 unsigned int ok_to_print, 45 unsigned int init_media); 46extern int generic_mii_ioctl(struct mii_if_info *mii_if, 47 struct mii_ioctl_data *mii_data, int cmd, 48 unsigned int *duplex_changed); 49 50 51static inline struct mii_ioctl_data *if_mii(struct ifreq *rq) 52{ 53 return (struct mii_ioctl_data *) &rq->ifr_ifru; 54} 55 56/** 57 * mii_nway_result 58 * @negotiated: value of MII ANAR and'd with ANLPAR 59 * 60 * Given a set of MII abilities, check each bit and returns the 61 * currently supported media, in the priority order defined by 62 * IEEE 802.3u. We use LPA_xxx constants but note this is not the 63 * value of LPA solely, as described above. 64 * 65 * The one exception to IEEE 802.3u is that 100baseT4 is placed 66 * between 100T-full and 100T-half. If your phy does not support 67 * 100T4 this is fine. If your phy places 100T4 elsewhere in the 68 * priority order, you will need to roll your own function. 69 */ 70static inline unsigned int mii_nway_result (unsigned int negotiated) 71{ 72 unsigned int ret; 73 74 if (negotiated & LPA_100FULL) 75 ret = LPA_100FULL; 76 else if (negotiated & LPA_100BASE4) 77 ret = LPA_100BASE4; 78 else if (negotiated & LPA_100HALF) 79 ret = LPA_100HALF; 80 else if (negotiated & LPA_10FULL) 81 ret = LPA_10FULL; 82 else 83 ret = LPA_10HALF; 84 85 return ret; 86} 87 88/** 89 * mii_duplex 90 * @duplex_lock: Non-zero if duplex is locked at full 91 * @negotiated: value of MII ANAR and'd with ANLPAR 92 * 93 * A small helper function for a common case. Returns one 94 * if the media is operating or locked at full duplex, and 95 * returns zero otherwise. 96 */ 97static inline unsigned int mii_duplex (unsigned int duplex_lock, 98 unsigned int negotiated) 99{ 100 if (duplex_lock) 101 return 1; 102 if (mii_nway_result(negotiated) & LPA_DUPLEX) 103 return 1; 104 return 0; 105} 106 107/** 108 * ethtool_adv_to_mii_adv_t 109 * @ethadv: the ethtool advertisement settings 110 * 111 * A small helper function that translates ethtool advertisement 112 * settings to phy autonegotiation advertisements for the 113 * MII_ADVERTISE register. 114 */ 115static inline u32 ethtool_adv_to_mii_adv_t(u32 ethadv) 116{ 117 u32 result = 0; 118 119 if (ethadv & ADVERTISED_10baseT_Half) 120 result |= ADVERTISE_10HALF; 121 if (ethadv & ADVERTISED_10baseT_Full) 122 result |= ADVERTISE_10FULL; 123 if (ethadv & ADVERTISED_100baseT_Half) 124 result |= ADVERTISE_100HALF; 125 if (ethadv & ADVERTISED_100baseT_Full) 126 result |= ADVERTISE_100FULL; 127 if (ethadv & ADVERTISED_Pause) 128 result |= ADVERTISE_PAUSE_CAP; 129 if (ethadv & ADVERTISED_Asym_Pause) 130 result |= ADVERTISE_PAUSE_ASYM; 131 132 return result; 133} 134 135/** 136 * linkmode_adv_to_mii_adv_t 137 * @advertising: the linkmode advertisement settings 138 * 139 * A small helper function that translates linkmode advertisement 140 * settings to phy autonegotiation advertisements for the 141 * MII_ADVERTISE register. 142 */ 143static inline u32 linkmode_adv_to_mii_adv_t(unsigned long *advertising) 144{ 145 u32 result = 0; 146 147 if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, advertising)) 148 result |= ADVERTISE_10HALF; 149 if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, advertising)) 150 result |= ADVERTISE_10FULL; 151 if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, advertising)) 152 result |= ADVERTISE_100HALF; 153 if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, advertising)) 154 result |= ADVERTISE_100FULL; 155 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertising)) 156 result |= ADVERTISE_PAUSE_CAP; 157 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, advertising)) 158 result |= ADVERTISE_PAUSE_ASYM; 159 160 return result; 161} 162 163/** 164 * mii_adv_to_ethtool_adv_t 165 * @adv: value of the MII_ADVERTISE register 166 * 167 * A small helper function that translates MII_ADVERTISE bits 168 * to ethtool advertisement settings. 169 */ 170static inline u32 mii_adv_to_ethtool_adv_t(u32 adv) 171{ 172 u32 result = 0; 173 174 if (adv & ADVERTISE_10HALF) 175 result |= ADVERTISED_10baseT_Half; 176 if (adv & ADVERTISE_10FULL) 177 result |= ADVERTISED_10baseT_Full; 178 if (adv & ADVERTISE_100HALF) 179 result |= ADVERTISED_100baseT_Half; 180 if (adv & ADVERTISE_100FULL) 181 result |= ADVERTISED_100baseT_Full; 182 if (adv & ADVERTISE_PAUSE_CAP) 183 result |= ADVERTISED_Pause; 184 if (adv & ADVERTISE_PAUSE_ASYM) 185 result |= ADVERTISED_Asym_Pause; 186 187 return result; 188} 189 190/** 191 * ethtool_adv_to_mii_ctrl1000_t 192 * @ethadv: the ethtool advertisement settings 193 * 194 * A small helper function that translates ethtool advertisement 195 * settings to phy autonegotiation advertisements for the 196 * MII_CTRL1000 register when in 1000T mode. 197 */ 198static inline u32 ethtool_adv_to_mii_ctrl1000_t(u32 ethadv) 199{ 200 u32 result = 0; 201 202 if (ethadv & ADVERTISED_1000baseT_Half) 203 result |= ADVERTISE_1000HALF; 204 if (ethadv & ADVERTISED_1000baseT_Full) 205 result |= ADVERTISE_1000FULL; 206 207 return result; 208} 209 210/** 211 * linkmode_adv_to_mii_ctrl1000_t 212 * @advertising: the linkmode advertisement settings 213 * 214 * A small helper function that translates linkmode advertisement 215 * settings to phy autonegotiation advertisements for the 216 * MII_CTRL1000 register when in 1000T mode. 217 */ 218static inline u32 linkmode_adv_to_mii_ctrl1000_t(unsigned long *advertising) 219{ 220 u32 result = 0; 221 222 if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, 223 advertising)) 224 result |= ADVERTISE_1000HALF; 225 if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, 226 advertising)) 227 result |= ADVERTISE_1000FULL; 228 229 return result; 230} 231 232/** 233 * mii_ctrl1000_to_ethtool_adv_t 234 * @adv: value of the MII_CTRL1000 register 235 * 236 * A small helper function that translates MII_CTRL1000 237 * bits, when in 1000Base-T mode, to ethtool 238 * advertisement settings. 239 */ 240static inline u32 mii_ctrl1000_to_ethtool_adv_t(u32 adv) 241{ 242 u32 result = 0; 243 244 if (adv & ADVERTISE_1000HALF) 245 result |= ADVERTISED_1000baseT_Half; 246 if (adv & ADVERTISE_1000FULL) 247 result |= ADVERTISED_1000baseT_Full; 248 249 return result; 250} 251 252/** 253 * mii_lpa_to_ethtool_lpa_t 254 * @adv: value of the MII_LPA register 255 * 256 * A small helper function that translates MII_LPA 257 * bits, when in 1000Base-T mode, to ethtool 258 * LP advertisement settings. 259 */ 260static inline u32 mii_lpa_to_ethtool_lpa_t(u32 lpa) 261{ 262 u32 result = 0; 263 264 if (lpa & LPA_LPACK) 265 result |= ADVERTISED_Autoneg; 266 267 return result | mii_adv_to_ethtool_adv_t(lpa); 268} 269 270/** 271 * mii_stat1000_to_ethtool_lpa_t 272 * @adv: value of the MII_STAT1000 register 273 * 274 * A small helper function that translates MII_STAT1000 275 * bits, when in 1000Base-T mode, to ethtool 276 * advertisement settings. 277 */ 278static inline u32 mii_stat1000_to_ethtool_lpa_t(u32 lpa) 279{ 280 u32 result = 0; 281 282 if (lpa & LPA_1000HALF) 283 result |= ADVERTISED_1000baseT_Half; 284 if (lpa & LPA_1000FULL) 285 result |= ADVERTISED_1000baseT_Full; 286 287 return result; 288} 289 290/** 291 * mii_stat1000_mod_linkmode_lpa_t 292 * @advertising: target the linkmode advertisement settings 293 * @adv: value of the MII_STAT1000 register 294 * 295 * A small helper function that translates MII_STAT1000 bits, when in 296 * 1000Base-T mode, to linkmode advertisement settings. Other bits in 297 * advertising are not changes. 298 */ 299static inline void mii_stat1000_mod_linkmode_lpa_t(unsigned long *advertising, 300 u32 lpa) 301{ 302 linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, 303 advertising, lpa & LPA_1000HALF); 304 305 linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, 306 advertising, lpa & LPA_1000FULL); 307} 308 309/** 310 * ethtool_adv_to_mii_adv_x 311 * @ethadv: the ethtool advertisement settings 312 * 313 * A small helper function that translates ethtool advertisement 314 * settings to phy autonegotiation advertisements for the 315 * MII_CTRL1000 register when in 1000Base-X mode. 316 */ 317static inline u32 ethtool_adv_to_mii_adv_x(u32 ethadv) 318{ 319 u32 result = 0; 320 321 if (ethadv & ADVERTISED_1000baseT_Half) 322 result |= ADVERTISE_1000XHALF; 323 if (ethadv & ADVERTISED_1000baseT_Full) 324 result |= ADVERTISE_1000XFULL; 325 if (ethadv & ADVERTISED_Pause) 326 result |= ADVERTISE_1000XPAUSE; 327 if (ethadv & ADVERTISED_Asym_Pause) 328 result |= ADVERTISE_1000XPSE_ASYM; 329 330 return result; 331} 332 333/** 334 * mii_adv_to_ethtool_adv_x 335 * @adv: value of the MII_CTRL1000 register 336 * 337 * A small helper function that translates MII_CTRL1000 338 * bits, when in 1000Base-X mode, to ethtool 339 * advertisement settings. 340 */ 341static inline u32 mii_adv_to_ethtool_adv_x(u32 adv) 342{ 343 u32 result = 0; 344 345 if (adv & ADVERTISE_1000XHALF) 346 result |= ADVERTISED_1000baseT_Half; 347 if (adv & ADVERTISE_1000XFULL) 348 result |= ADVERTISED_1000baseT_Full; 349 if (adv & ADVERTISE_1000XPAUSE) 350 result |= ADVERTISED_Pause; 351 if (adv & ADVERTISE_1000XPSE_ASYM) 352 result |= ADVERTISED_Asym_Pause; 353 354 return result; 355} 356 357/** 358 * mii_adv_mod_linkmode_adv_t 359 * @advertising:pointer to destination link mode. 360 * @adv: value of the MII_ADVERTISE register 361 * 362 * A small helper function that translates MII_ADVERTISE bits to 363 * linkmode advertisement settings. Leaves other bits unchanged. 364 */ 365static inline void mii_adv_mod_linkmode_adv_t(unsigned long *advertising, 366 u32 adv) 367{ 368 linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, 369 advertising, adv & ADVERTISE_10HALF); 370 371 linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, 372 advertising, adv & ADVERTISE_10FULL); 373 374 linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, 375 advertising, adv & ADVERTISE_100HALF); 376 377 linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, 378 advertising, adv & ADVERTISE_100FULL); 379 380 linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertising, 381 adv & ADVERTISE_PAUSE_CAP); 382 383 linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, 384 advertising, adv & ADVERTISE_PAUSE_ASYM); 385} 386 387/** 388 * mii_adv_to_linkmode_adv_t 389 * @advertising:pointer to destination link mode. 390 * @adv: value of the MII_ADVERTISE register 391 * 392 * A small helper function that translates MII_ADVERTISE bits 393 * to linkmode advertisement settings. Clears the old value 394 * of advertising. 395 */ 396static inline void mii_adv_to_linkmode_adv_t(unsigned long *advertising, 397 u32 adv) 398{ 399 linkmode_zero(advertising); 400 401 mii_adv_mod_linkmode_adv_t(advertising, adv); 402} 403 404/** 405 * mii_lpa_to_linkmode_lpa_t 406 * @adv: value of the MII_LPA register 407 * 408 * A small helper function that translates MII_LPA bits, when in 409 * 1000Base-T mode, to linkmode LP advertisement settings. Clears the 410 * old value of advertising 411 */ 412static inline void mii_lpa_to_linkmode_lpa_t(unsigned long *lp_advertising, 413 u32 lpa) 414{ 415 mii_adv_to_linkmode_adv_t(lp_advertising, lpa); 416 417 if (lpa & LPA_LPACK) 418 linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, 419 lp_advertising); 420 421} 422 423/** 424 * mii_lpa_mod_linkmode_lpa_t 425 * @adv: value of the MII_LPA register 426 * 427 * A small helper function that translates MII_LPA bits, when in 428 * 1000Base-T mode, to linkmode LP advertisement settings. Leaves 429 * other bits unchanged. 430 */ 431static inline void mii_lpa_mod_linkmode_lpa_t(unsigned long *lp_advertising, 432 u32 lpa) 433{ 434 mii_adv_mod_linkmode_adv_t(lp_advertising, lpa); 435 436 linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, 437 lp_advertising, lpa & LPA_LPACK); 438} 439 440static inline void mii_ctrl1000_mod_linkmode_adv_t(unsigned long *advertising, 441 u32 ctrl1000) 442{ 443 linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, advertising, 444 ctrl1000 & ADVERTISE_1000HALF); 445 linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, advertising, 446 ctrl1000 & ADVERTISE_1000FULL); 447} 448 449/** 450 * linkmode_adv_to_lcl_adv_t 451 * @advertising:pointer to linkmode advertising 452 * 453 * A small helper function that translates linkmode advertising to LVL 454 * pause capabilities. 455 */ 456static inline u32 linkmode_adv_to_lcl_adv_t(unsigned long *advertising) 457{ 458 u32 lcl_adv = 0; 459 460 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, 461 advertising)) 462 lcl_adv |= ADVERTISE_PAUSE_CAP; 463 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, 464 advertising)) 465 lcl_adv |= ADVERTISE_PAUSE_ASYM; 466 467 return lcl_adv; 468} 469 470/** 471 * mii_lpa_mod_linkmode_x - decode the link partner's config_reg to linkmodes 472 * @linkmodes: link modes array 473 * @lpa: config_reg word from link partner 474 * @fd_bit: link mode for 1000XFULL bit 475 */ 476static inline void mii_lpa_mod_linkmode_x(unsigned long *linkmodes, u16 lpa, 477 int fd_bit) 478{ 479 linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, linkmodes, 480 lpa & LPA_LPACK); 481 linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, linkmodes, 482 lpa & LPA_1000XPAUSE); 483 linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, linkmodes, 484 lpa & LPA_1000XPAUSE_ASYM); 485 linkmode_mod_bit(fd_bit, linkmodes, 486 lpa & LPA_1000XFULL); 487} 488 489/** 490 * linkmode_adv_to_mii_adv_x - encode a linkmode to config_reg 491 * @linkmodes: linkmodes 492 * @fd_bit: full duplex bit 493 */ 494static inline u16 linkmode_adv_to_mii_adv_x(const unsigned long *linkmodes, 495 int fd_bit) 496{ 497 u16 adv = 0; 498 499 if (linkmode_test_bit(fd_bit, linkmodes)) 500 adv |= ADVERTISE_1000XFULL; 501 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, linkmodes)) 502 adv |= ADVERTISE_1000XPAUSE; 503 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, linkmodes)) 504 adv |= ADVERTISE_1000XPSE_ASYM; 505 506 return adv; 507} 508 509/** 510 * mii_advertise_flowctrl - get flow control advertisement flags 511 * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both) 512 */ 513static inline u16 mii_advertise_flowctrl(int cap) 514{ 515 u16 adv = 0; 516 517 if (cap & FLOW_CTRL_RX) 518 adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; 519 if (cap & FLOW_CTRL_TX) 520 adv ^= ADVERTISE_PAUSE_ASYM; 521 522 return adv; 523} 524 525/** 526 * mii_resolve_flowctrl_fdx 527 * @lcladv: value of MII ADVERTISE register 528 * @rmtadv: value of MII LPA register 529 * 530 * Resolve full duplex flow control as per IEEE 802.3-2005 table 28B-3 531 */ 532static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv) 533{ 534 u8 cap = 0; 535 536 if (lcladv & rmtadv & ADVERTISE_PAUSE_CAP) { 537 cap = FLOW_CTRL_TX | FLOW_CTRL_RX; 538 } else if (lcladv & rmtadv & ADVERTISE_PAUSE_ASYM) { 539 if (lcladv & ADVERTISE_PAUSE_CAP) 540 cap = FLOW_CTRL_RX; 541 else if (rmtadv & ADVERTISE_PAUSE_CAP) 542 cap = FLOW_CTRL_TX; 543 } 544 545 return cap; 546} 547 548/** 549 * mii_bmcr_encode_fixed - encode fixed speed/duplex settings to a BMCR value 550 * @speed: a SPEED_* value 551 * @duplex: a DUPLEX_* value 552 * 553 * Encode the speed and duplex to a BMCR value. 2500, 1000, 100 and 10 Mbps are 554 * supported. 2500Mbps is encoded to 1000Mbps. Other speeds are encoded as 10 555 * Mbps. Unknown duplex values are encoded to half-duplex. 556 */ 557static inline u16 mii_bmcr_encode_fixed(int speed, int duplex) 558{ 559 u16 bmcr; 560 561 switch (speed) { 562 case SPEED_2500: 563 case SPEED_1000: 564 bmcr = BMCR_SPEED1000; 565 break; 566 567 case SPEED_100: 568 bmcr = BMCR_SPEED100; 569 break; 570 571 case SPEED_10: 572 default: 573 bmcr = BMCR_SPEED10; 574 break; 575 } 576 577 if (duplex == DUPLEX_FULL) 578 bmcr |= BMCR_FULLDPLX; 579 580 return bmcr; 581} 582 583#endif /* __LINUX_MII_H__ */ 584