1#ifndef _HIL_H_ 2#define _HIL_H_ 3 4/* 5 * Hewlett Packard Human Interface Loop (HP-HIL) Protocol -- header. 6 * 7 * Copyright (c) 2001 Brian S. Julin 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions, and the following disclaimer, 15 * without modification. 16 * 2. The name of the author may not be used to endorse or promote products 17 * derived from this software without specific prior written permission. 18 * 19 * Alternatively, this software may be distributed under the terms of the 20 * GNU General Public License ("GPL"). 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 26 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 31 * 32 * References: 33 * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A 34 * 35 * A note of thanks to HP for providing and shipping reference materials 36 * free of charge to help in the development of HIL support for Linux. 37 * 38 */ 39 40#include <asm/types.h> 41 42/* Physical constants relevant to raw loop/device timing. 43 */ 44 45#define HIL_CLOCK 8MHZ 46#define HIL_EK1_CLOCK 30HZ 47#define HIL_EK2_CLOCK 60HZ 48 49#define HIL_TIMEOUT_DEV 5 /* ms */ 50#define HIL_TIMEOUT_DEVS 10 /* ms */ 51#define HIL_TIMEOUT_NORESP 10 /* ms */ 52#define HIL_TIMEOUT_DEVS_DATA 16 /* ms */ 53#define HIL_TIMEOUT_SELFTEST 200 /* ms */ 54 55 56/* Actual wire line coding. These will only be useful if someone is 57 * implementing a software MLC to run HIL devices on a non-parisc machine. 58 */ 59 60#define HIL_WIRE_PACKET_LEN 15 61enum hil_wire_bitpos { 62 HIL_WIRE_START = 0, 63 HIL_WIRE_ADDR2, 64 HIL_WIRE_ADDR1, 65 HIL_WIRE_ADDR0, 66 HIL_WIRE_COMMAND, 67 HIL_WIRE_DATA7, 68 HIL_WIRE_DATA6, 69 HIL_WIRE_DATA5, 70 HIL_WIRE_DATA4, 71 HIL_WIRE_DATA3, 72 HIL_WIRE_DATA2, 73 HIL_WIRE_DATA1, 74 HIL_WIRE_DATA0, 75 HIL_WIRE_PARITY, 76 HIL_WIRE_STOP 77}; 78 79/* HP documentation uses these bit positions to refer to commands; 80 * we will call these "packets". 81 */ 82enum hil_pkt_bitpos { 83 HIL_PKT_CMD = 0x00000800, 84 HIL_PKT_ADDR2 = 0x00000400, 85 HIL_PKT_ADDR1 = 0x00000200, 86 HIL_PKT_ADDR0 = 0x00000100, 87 HIL_PKT_ADDR_MASK = 0x00000700, 88 HIL_PKT_ADDR_SHIFT = 8, 89 HIL_PKT_DATA7 = 0x00000080, 90 HIL_PKT_DATA6 = 0x00000040, 91 HIL_PKT_DATA5 = 0x00000020, 92 HIL_PKT_DATA4 = 0x00000010, 93 HIL_PKT_DATA3 = 0x00000008, 94 HIL_PKT_DATA2 = 0x00000004, 95 HIL_PKT_DATA1 = 0x00000002, 96 HIL_PKT_DATA0 = 0x00000001, 97 HIL_PKT_DATA_MASK = 0x000000FF, 98 HIL_PKT_DATA_SHIFT = 0 99}; 100 101/* The HIL MLC also has several error/status/control bits. We extend the 102 * "packet" to include these when direct access to the MLC is available, 103 * or emulate them in cases where they are not available. 104 * 105 * This way the device driver knows that the underlying MLC driver 106 * has had to deal with loop errors. 107 */ 108enum hil_error_bitpos { 109 HIL_ERR_OB = 0x00000800, /* MLC is busy sending an auto-poll, 110 or we have filled up the output 111 buffer and must wait. */ 112 HIL_ERR_INT = 0x00010000, /* A normal interrupt has occurred. */ 113 HIL_ERR_NMI = 0x00020000, /* An NMI has occurred. */ 114 HIL_ERR_LERR = 0x00040000, /* A poll didn't come back. */ 115 HIL_ERR_PERR = 0x01000000, /* There was a Parity Error. */ 116 HIL_ERR_FERR = 0x02000000, /* There was a Framing Error. */ 117 HIL_ERR_FOF = 0x04000000 /* Input FIFO Overflowed. */ 118}; 119 120enum hil_control_bitpos { 121 HIL_CTRL_TEST = 0x00010000, 122 HIL_CTRL_IPF = 0x00040000, 123 HIL_CTRL_APE = 0x02000000 124}; 125 126/* Bits 30,31 are unused, we use them to control write behavior. */ 127#define HIL_DO_ALTER_CTRL 0x40000000 /* Write MSW of packet to control 128 before writing LSW to loop */ 129#define HIL_CTRL_ONLY 0xc0000000 /* *Only* alter the control registers */ 130 131/* This gives us a 32-bit "packet" 132 */ 133typedef u32 hil_packet; 134 135 136/* HIL Loop commands 137 */ 138enum hil_command { 139 HIL_CMD_IFC = 0x00, /* Interface Clear */ 140 HIL_CMD_EPT = 0x01, /* Enter Pass-Thru Mode */ 141 HIL_CMD_ELB = 0x02, /* Enter Loop-Back Mode */ 142 HIL_CMD_IDD = 0x03, /* Identify and Describe */ 143 HIL_CMD_DSR = 0x04, /* Device Soft Reset */ 144 HIL_CMD_PST = 0x05, /* Perform Self Test */ 145 HIL_CMD_RRG = 0x06, /* Read Register */ 146 HIL_CMD_WRG = 0x07, /* Write Register */ 147 HIL_CMD_ACF = 0x08, /* Auto Configure */ 148 HIL_CMDID_ACF = 0x07, /* Auto Configure bits with incremented ID */ 149 HIL_CMD_POL = 0x10, /* Poll */ 150 HIL_CMDCT_POL = 0x0f, /* Poll command bits with item count */ 151 HIL_CMD_RPL = 0x20, /* RePoll */ 152 HIL_CMDCT_RPL = 0x0f, /* RePoll command bits with item count */ 153 HIL_CMD_RNM = 0x30, /* Report Name */ 154 HIL_CMD_RST = 0x31, /* Report Status */ 155 HIL_CMD_EXD = 0x32, /* Extended Describe */ 156 HIL_CMD_RSC = 0x33, /* Report Security Code */ 157 158 /* 0x34 to 0x3c reserved for future use */ 159 160 HIL_CMD_DKA = 0x3d, /* Disable Keyswitch Autorepeat */ 161 HIL_CMD_EK1 = 0x3e, /* Enable Keyswitch Autorepeat 1 */ 162 HIL_CMD_EK2 = 0x3f, /* Enable Keyswitch Autorepeat 2 */ 163 HIL_CMD_PR1 = 0x40, /* Prompt1 */ 164 HIL_CMD_PR2 = 0x41, /* Prompt2 */ 165 HIL_CMD_PR3 = 0x42, /* Prompt3 */ 166 HIL_CMD_PR4 = 0x43, /* Prompt4 */ 167 HIL_CMD_PR5 = 0x44, /* Prompt5 */ 168 HIL_CMD_PR6 = 0x45, /* Prompt6 */ 169 HIL_CMD_PR7 = 0x46, /* Prompt7 */ 170 HIL_CMD_PRM = 0x47, /* Prompt (General Purpose) */ 171 HIL_CMD_AK1 = 0x48, /* Acknowledge1 */ 172 HIL_CMD_AK2 = 0x49, /* Acknowledge2 */ 173 HIL_CMD_AK3 = 0x4a, /* Acknowledge3 */ 174 HIL_CMD_AK4 = 0x4b, /* Acknowledge4 */ 175 HIL_CMD_AK5 = 0x4c, /* Acknowledge5 */ 176 HIL_CMD_AK6 = 0x4d, /* Acknowledge6 */ 177 HIL_CMD_AK7 = 0x4e, /* Acknowledge7 */ 178 HIL_CMD_ACK = 0x4f, /* Acknowledge (General Purpose) */ 179 180 /* 0x50 to 0x78 reserved for future use */ 181 /* 0x80 to 0xEF device-specific commands */ 182 /* 0xf0 to 0xf9 reserved for future use */ 183 184 HIL_CMD_RIO = 0xfa, /* Register I/O Error */ 185 HIL_CMD_SHR = 0xfb, /* System Hard Reset */ 186 HIL_CMD_TER = 0xfc, /* Transmission Error */ 187 HIL_CMD_CAE = 0xfd, /* Configuration Address Error */ 188 HIL_CMD_DHR = 0xfe, /* Device Hard Reset */ 189 190 /* 0xff is prohibited from use. */ 191}; 192 193 194/* 195 * Response "records" to HIL commands 196 */ 197 198/* Device ID byte 199 */ 200#define HIL_IDD_DID_TYPE_MASK 0xe0 /* Primary type bits */ 201#define HIL_IDD_DID_TYPE_KB_INTEGRAL 0xa0 /* Integral keyboard */ 202#define HIL_IDD_DID_TYPE_KB_ITF 0xc0 /* ITD keyboard */ 203#define HIL_IDD_DID_TYPE_KB_RSVD 0xe0 /* Reserved keyboard type */ 204#define HIL_IDD_DID_TYPE_KB_LANG_MASK 0x1f /* Keyboard locale bits */ 205#define HIL_IDD_DID_KBLANG_USE_ESD 0x00 /* Use ESD Locale instead */ 206#define HIL_IDD_DID_TYPE_ABS 0x80 /* Absolute Positioners */ 207#define HIL_IDD_DID_ABS_RSVD1_MASK 0xf8 /* Reserved */ 208#define HIL_IDD_DID_ABS_RSVD1 0x98 209#define HIL_IDD_DID_ABS_TABLET_MASK 0xf8 /* Tablets and digitizers */ 210#define HIL_IDD_DID_ABS_TABLET 0x90 211#define HIL_IDD_DID_ABS_TSCREEN_MASK 0xfc /* Touch screens */ 212#define HIL_IDD_DID_ABS_TSCREEN 0x8c 213#define HIL_IDD_DID_ABS_RSVD2_MASK 0xfc /* Reserved */ 214#define HIL_IDD_DID_ABS_RSVD2 0x88 215#define HIL_IDD_DID_ABS_RSVD3_MASK 0xfc /* Reserved */ 216#define HIL_IDD_DID_ABS_RSVD3 0x80 217#define HIL_IDD_DID_TYPE_REL 0x60 /* Relative Positioners */ 218#define HIL_IDD_DID_REL_RSVD1_MASK 0xf0 /* Reserved */ 219#define HIL_IDD_DID_REL_RSVD1 0x70 220#define HIL_IDD_DID_REL_RSVD2_MASK 0xfc /* Reserved */ 221#define HIL_IDD_DID_REL_RSVD2 0x6c 222#define HIL_IDD_DID_REL_MOUSE_MASK 0xfc /* Mouse */ 223#define HIL_IDD_DID_REL_MOUSE 0x68 224#define HIL_IDD_DID_REL_QUAD_MASK 0xf8 /* Other Quadrature Devices */ 225#define HIL_IDD_DID_REL_QUAD 0x60 226#define HIL_IDD_DID_TYPE_CHAR 0x40 /* Character Entry */ 227#define HIL_IDD_DID_CHAR_BARCODE_MASK 0xfc /* Barcode Reader */ 228#define HIL_IDD_DID_CHAR_BARCODE 0x5c 229#define HIL_IDD_DID_CHAR_RSVD1_MASK 0xfc /* Reserved */ 230#define HIL_IDD_DID_CHAR_RSVD1 0x58 231#define HIL_IDD_DID_CHAR_RSVD2_MASK 0xf8 /* Reserved */ 232#define HIL_IDD_DID_CHAR_RSVD2 0x50 233#define HIL_IDD_DID_CHAR_RSVD3_MASK 0xf0 /* Reserved */ 234#define HIL_IDD_DID_CHAR_RSVD3 0x40 235#define HIL_IDD_DID_TYPE_OTHER 0x20 /* Miscellaneous */ 236#define HIL_IDD_DID_OTHER_RSVD1_MASK 0xf0 /* Reserved */ 237#define HIL_IDD_DID_OTHER_RSVD1 0x30 238#define HIL_IDD_DID_OTHER_BARCODE_MASK 0xfc /* Tone Generator */ 239#define HIL_IDD_DID_OTHER_BARCODE 0x2c 240#define HIL_IDD_DID_OTHER_RSVD2_MASK 0xfc /* Reserved */ 241#define HIL_IDD_DID_OTHER_RSVD2 0x28 242#define HIL_IDD_DID_OTHER_RSVD3_MASK 0xf8 /* Reserved */ 243#define HIL_IDD_DID_OTHER_RSVD3 0x20 244#define HIL_IDD_DID_TYPE_KEYPAD 0x00 /* Vectra Keyboard */ 245 246/* IDD record header 247 */ 248#define HIL_IDD_HEADER_AXSET_MASK 0x03 /* Number of axis in a set */ 249#define HIL_IDD_HEADER_RSC 0x04 /* Supports RSC command */ 250#define HIL_IDD_HEADER_EXD 0x08 /* Supports EXD command */ 251#define HIL_IDD_HEADER_IOD 0x10 /* IOD byte to follow */ 252#define HIL_IDD_HEADER_16BIT 0x20 /* 16 (vs. 8) bit resolution */ 253#define HIL_IDD_HEADER_ABS 0x40 /* Reports Absolute Position */ 254#define HIL_IDD_HEADER_2X_AXIS 0x80 /* Two sets of 1-3 axis */ 255 256/* I/O Descriptor 257 */ 258#define HIL_IDD_IOD_NBUTTON_MASK 0x07 /* Number of buttons */ 259#define HIL_IDD_IOD_PROXIMITY 0x08 /* Proximity in/out events */ 260#define HIL_IDD_IOD_PROMPT_MASK 0x70 /* Number of prompts/acks */ 261#define HIL_IDD_IOD_PROMPT_SHIFT 4 262#define HIL_IDD_IOD_PROMPT 0x80 /* Generic prompt/ack */ 263 264#define HIL_IDD_NUM_AXES_PER_SET(header_packet) \ 265((header_packet) & HIL_IDD_HEADER_AXSET_MASK) 266 267#define HIL_IDD_NUM_AXSETS(header_packet) \ 268(2 - !((header_packet) & HIL_IDD_HEADER_2X_AXIS)) 269 270#define HIL_IDD_LEN(header_packet) \ 271((4 - !(header_packet & HIL_IDD_HEADER_IOD) - \ 272 2 * !(HIL_IDD_NUM_AXES_PER_SET(header_packet))) + \ 273 2 * HIL_IDD_NUM_AXES_PER_SET(header_packet) * \ 274 !!((header_packet) & HIL_IDD_HEADER_ABS)) 275 276/* The following HIL_IDD_* macros assume you have an array of 277 * packets and/or unpacked 8-bit data in the order that they 278 * were received. 279 */ 280 281#define HIL_IDD_AXIS_COUNTS_PER_M(header_ptr) \ 282(!(HIL_IDD_NUM_AXSETS(*(header_ptr))) ? -1 : \ 283(((*(header_ptr + 1) & HIL_PKT_DATA_MASK) + \ 284 ((*(header_ptr + 2) & HIL_PKT_DATA_MASK)) << 8) \ 285* ((*(header_ptr) & HIL_IDD_HEADER_16BIT) ? 100 : 1))) 286 287#define HIL_IDD_AXIS_MAX(header_ptr, __axnum) \ 288((!(*(header_ptr) & HIL_IDD_HEADER_ABS) || \ 289 (HIL_IDD_NUM_AXES_PER_SET(*(header_ptr)) <= __axnum)) ? 0 : \ 290 ((HIL_PKT_DATA_MASK & *((header_ptr) + 3 + 2 * __axnum)) + \ 291 ((HIL_PKT_DATA_MASK & *((header_ptr) + 4 + 2 * __axnum)) << 8))) 292 293#define HIL_IDD_IOD(header_ptr) \ 294(*(header_ptr + HIL_IDD_LEN((*header_ptr)) - 1)) 295 296#define HIL_IDD_HAS_GEN_PROMPT(header_ptr) \ 297((*header_ptr & HIL_IDD_HEADER_IOD) && \ 298 (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROMPT)) 299 300#define HIL_IDD_HAS_GEN_PROXIMITY(header_ptr) \ 301((*header_ptr & HIL_IDD_HEADER_IOD) && \ 302 (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROXIMITY)) 303 304#define HIL_IDD_NUM_BUTTONS(header_ptr) \ 305((*header_ptr & HIL_IDD_HEADER_IOD) ? \ 306 (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NBUTTON_MASK) : 0) 307 308#define HIL_IDD_NUM_PROMPTS(header_ptr) \ 309((*header_ptr & HIL_IDD_HEADER_IOD) ? \ 310 ((HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NPROMPT_MASK) \ 311 >> HIL_IDD_IOD_PROMPT_SHIFT) : 0) 312 313/* The response to HIL EXD commands -- the "extended describe record" */ 314#define HIL_EXD_HEADER_WRG 0x03 /* Supports type2 WRG */ 315#define HIL_EXD_HEADER_WRG_TYPE1 0x01 /* Supports type1 WRG */ 316#define HIL_EXD_HEADER_WRG_TYPE2 0x02 /* Supports type2 WRG */ 317#define HIL_EXD_HEADER_RRG 0x04 /* Supports RRG command */ 318#define HIL_EXD_HEADER_RNM 0x10 /* Supports RNM command */ 319#define HIL_EXD_HEADER_RST 0x20 /* Supports RST command */ 320#define HIL_EXD_HEADER_LOCALE 0x40 /* Contains locale code */ 321 322#define HIL_EXD_NUM_RRG(header_ptr) \ 323((*header_ptr & HIL_EXD_HEADER_RRG) ? \ 324 (*(header_ptr + 1) & HIL_PKT_DATA_MASK) : 0) 325 326#define HIL_EXD_NUM_WWG(header_ptr) \ 327((*header_ptr & HIL_EXD_HEADER_WRG) ? \ 328 (*(header_ptr + 2 - !(*header_ptr & HIL_EXD_HEADER_RRG)) & \ 329 HIL_PKT_DATA_MASK) : 0) 330 331#define HIL_EXD_LEN(header_ptr) \ 332(!!(*header_ptr & HIL_EXD_HEADER_RRG) + \ 333 !!(*header_ptr & HIL_EXD_HEADER_WRG) + \ 334 !!(*header_ptr & HIL_EXD_HEADER_LOCALE) + \ 335 2 * !!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) + 1) 336 337#define HIL_EXD_LOCALE(header_ptr) \ 338(!(*header_ptr & HIL_EXD_HEADER_LOCALE) ? -1 : \ 339 (*(header_ptr + HIL_EXD_LEN(header_ptr) - 1) & HIL_PKT_DATA_MASK)) 340 341#define HIL_EXD_WRG_TYPE2_LEN(header_ptr) \ 342(!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) ? -1 : \ 343 (*(header_ptr + HIL_EXD_LEN(header_ptr) - 2 - \ 344 !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) + \ 345 ((*(header_ptr + HIL_EXD_LEN(header_ptr) - 1 - \ 346 !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) << 8)) 347 348/* Device locale codes. */ 349 350/* Last defined locale code. Everything above this is "Reserved", 351 and note that this same table applies to the Device ID Byte where 352 keyboards may have a nationality code which is only 5 bits. */ 353#define HIL_LOCALE_MAX 0x1f 354 355/* Map to hopefully useful strings. I was trying to make these look 356 like locale.aliases strings do; maybe that isn't the right table to 357 emulate. In either case, I didn't have much to work on. */ 358#define HIL_LOCALE_MAP \ 359"", /* 0x00 Reserved */ \ 360"", /* 0x01 Reserved */ \ 361"", /* 0x02 Reserved */ \ 362"swiss.french", /* 0x03 Swiss/French */ \ 363"portuguese", /* 0x04 Portuguese */ \ 364"arabic", /* 0x05 Arabic */ \ 365"hebrew", /* 0x06 Hebrew */ \ 366"english.canadian", /* 0x07 Canadian English */ \ 367"turkish", /* 0x08 Turkish */ \ 368"greek", /* 0x09 Greek */ \ 369"thai", /* 0x0a Thai (Thailand) */ \ 370"italian", /* 0x0b Italian */ \ 371"korean", /* 0x0c Hangul (Korea) */ \ 372"dutch", /* 0x0d Dutch */ \ 373"swedish", /* 0x0e Swedish */ \ 374"german", /* 0x0f German */ \ 375"chinese", /* 0x10 Chinese-PRC */ \ 376"chinese", /* 0x11 Chinese-ROC */ \ 377"swiss.french", /* 0x12 Swiss/French II */ \ 378"spanish", /* 0x13 Spanish */ \ 379"swiss.german", /* 0x14 Swiss/German II */ \ 380"flemish", /* 0x15 Belgian (Flemish) */ \ 381"finnish", /* 0x16 Finnish */ \ 382"english.uk", /* 0x17 United Kingdom */ \ 383"french.canadian", /* 0x18 French/Canadian */ \ 384"swiss.german", /* 0x19 Swiss/German */ \ 385"norwegian", /* 0x1a Norwegian */ \ 386"french", /* 0x1b French */ \ 387"danish", /* 0x1c Danish */ \ 388"japanese", /* 0x1d Katakana */ \ 389"spanish", /* 0x1e Latin American/Spanish*/\ 390"english.us" /* 0x1f United States */ \ 391 392 393/* HIL keycodes */ 394#define HIL_KEYCODES_SET1_TBLSIZE 128 395#define HIL_KEYCODES_SET1 \ 396 KEY_5, KEY_RESERVED, KEY_RIGHTALT, KEY_LEFTALT, \ 397 KEY_RIGHTSHIFT, KEY_LEFTSHIFT, KEY_LEFTCTRL, KEY_SYSRQ, \ 398 KEY_KP4, KEY_KP8, KEY_KP5, KEY_KP9, \ 399 KEY_KP6, KEY_KP7, KEY_KPCOMMA, KEY_KPENTER, \ 400 KEY_KP1, KEY_KPSLASH, KEY_KP2, KEY_KPPLUS, \ 401 KEY_KP3, KEY_KPASTERISK, KEY_KP0, KEY_KPMINUS, \ 402 KEY_B, KEY_V, KEY_C, KEY_X, \ 403 KEY_Z, KEY_RESERVED, KEY_RESERVED, KEY_ESC, \ 404 KEY_6, KEY_F10, KEY_3, KEY_F11, \ 405 KEY_KPDOT, KEY_F9, KEY_TAB /*KP*/, KEY_F12, \ 406 KEY_H, KEY_G, KEY_F, KEY_D, \ 407 KEY_S, KEY_A, KEY_RESERVED, KEY_CAPSLOCK, \ 408 KEY_U, KEY_Y, KEY_T, KEY_R, \ 409 KEY_E, KEY_W, KEY_Q, KEY_TAB, \ 410 KEY_7, KEY_6, KEY_5, KEY_4, \ 411 KEY_3, KEY_2, KEY_1, KEY_GRAVE, \ 412 KEY_F13, KEY_F14, KEY_F15, KEY_F16, \ 413 KEY_F17, KEY_F18, KEY_F19, KEY_F20, \ 414 KEY_MENU, KEY_F4, KEY_F3, KEY_F2, \ 415 KEY_F1, KEY_VOLUMEUP, KEY_STOP, KEY_SENDFILE, \ 416 KEY_SYSRQ, KEY_F5, KEY_F6, KEY_F7, \ 417 KEY_F8, KEY_VOLUMEDOWN, KEY_DEL_EOL, KEY_DEL_EOS, \ 418 KEY_8, KEY_9, KEY_0, KEY_MINUS, \ 419 KEY_EQUAL, KEY_BACKSPACE, KEY_INS_LINE, KEY_DEL_LINE, \ 420 KEY_I, KEY_O, KEY_P, KEY_LEFTBRACE, \ 421 KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_INSERT, KEY_DELETE, \ 422 KEY_J, KEY_K, KEY_L, KEY_SEMICOLON, \ 423 KEY_APOSTROPHE, KEY_ENTER, KEY_HOME, KEY_PAGEUP, \ 424 KEY_M, KEY_COMMA, KEY_DOT, KEY_SLASH, \ 425 KEY_BACKSLASH, KEY_SELECT, KEY_102ND, KEY_PAGEDOWN, \ 426 KEY_N, KEY_SPACE, KEY_NEXT, KEY_RESERVED, \ 427 KEY_LEFT, KEY_DOWN, KEY_UP, KEY_RIGHT 428 429 430#define HIL_KEYCODES_SET3_TBLSIZE 128 431#define HIL_KEYCODES_SET3 \ 432 KEY_RESERVED, KEY_ESC, KEY_1, KEY_2, \ 433 KEY_3, KEY_4, KEY_5, KEY_6, \ 434 KEY_7, KEY_8, KEY_9, KEY_0, \ 435 KEY_MINUS, KEY_EQUAL, KEY_BACKSPACE, KEY_TAB, \ 436 KEY_Q, KEY_W, KEY_E, KEY_R, \ 437 KEY_T, KEY_Y, KEY_U, KEY_I, \ 438 KEY_O, KEY_P, KEY_LEFTBRACE, KEY_RIGHTBRACE, \ 439 KEY_ENTER, KEY_LEFTCTRL, KEY_A, KEY_S, \ 440 KEY_D, KEY_F, KEY_G, KEY_H, \ 441 KEY_J, KEY_K, KEY_L, KEY_SEMICOLON, \ 442 KEY_APOSTROPHE,KEY_GRAVE, KEY_LEFTSHIFT, KEY_BACKSLASH, \ 443 KEY_Z, KEY_X, KEY_C, KEY_V, \ 444 KEY_B, KEY_N, KEY_M, KEY_COMMA, \ 445 KEY_DOT, KEY_SLASH, KEY_RIGHTSHIFT, KEY_KPASTERISK, \ 446 KEY_LEFTALT, KEY_SPACE, KEY_CAPSLOCK, KEY_F1, \ 447 KEY_F2, KEY_F3, KEY_F4, KEY_F5, \ 448 KEY_F6, KEY_F7, KEY_F8, KEY_F9, \ 449 KEY_F10, KEY_NUMLOCK, KEY_SCROLLLOCK, KEY_KP7, \ 450 KEY_KP8, KEY_KP9, KEY_KPMINUS, KEY_KP4, \ 451 KEY_KP5, KEY_KP6, KEY_KPPLUS, KEY_KP1, \ 452 KEY_KP2, KEY_KP3, KEY_KP0, KEY_KPDOT, \ 453 KEY_SYSRQ, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ 454 KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ 455 KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ 456 KEY_UP, KEY_LEFT, KEY_DOWN, KEY_RIGHT, \ 457 KEY_HOME, KEY_PAGEUP, KEY_END, KEY_PAGEDOWN, \ 458 KEY_INSERT, KEY_DELETE, KEY_102ND, KEY_RESERVED, \ 459 KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ 460 KEY_F1, KEY_F2, KEY_F3, KEY_F4, \ 461 KEY_F5, KEY_F6, KEY_F7, KEY_F8, \ 462 KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ 463 KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED 464 465 466/* Response to POL command, the "poll record header" */ 467 468#define HIL_POL_NUM_AXES_MASK 0x03 /* Number of axis reported */ 469#define HIL_POL_CTS 0x04 /* Device ready to receive data */ 470#define HIL_POL_STATUS_PENDING 0x08 /* Device has status to report */ 471#define HIL_POL_CHARTYPE_MASK 0x70 /* Type of character data to follow */ 472#define HIL_POL_CHARTYPE_NONE 0x00 /* No character data to follow */ 473#define HIL_POL_CHARTYPE_RSVD1 0x10 /* Reserved Set 1 */ 474#define HIL_POL_CHARTYPE_ASCII 0x20 /* U.S. ASCII */ 475#define HIL_POL_CHARTYPE_BINARY 0x30 /* Binary data */ 476#define HIL_POL_CHARTYPE_SET1 0x40 /* Keycode Set 1 */ 477#define HIL_POL_CHARTYPE_RSVD2 0x50 /* Reserved Set 2 */ 478#define HIL_POL_CHARTYPE_SET2 0x60 /* Keycode Set 2 */ 479#define HIL_POL_CHARTYPE_SET3 0x70 /* Keycode Set 3 */ 480#define HIL_POL_AXIS_ALT 0x80 /* Data is from axis set 2 */ 481 482 483#endif /* _HIL_H_ */ 484