1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 *  cb710/cb710.h
4 *
5 *  Copyright by Micha�� Miros��aw, 2008-2009
6 */
7#ifndef LINUX_CB710_DRIVER_H
8#define LINUX_CB710_DRIVER_H
9
10#include <linux/io.h>
11#include <linux/interrupt.h>
12#include <linux/spinlock.h>
13#include <linux/pci.h>
14#include <linux/platform_device.h>
15#include <linux/mmc/host.h>
16
17struct cb710_slot;
18
19typedef int (*cb710_irq_handler_t)(struct cb710_slot *);
20
21/* per-virtual-slot structure */
22struct cb710_slot {
23	struct platform_device	pdev;
24	void __iomem		*iobase;
25	cb710_irq_handler_t	irq_handler;
26};
27
28/* per-device structure */
29struct cb710_chip {
30	struct pci_dev		*pdev;
31	void __iomem		*iobase;
32	unsigned		platform_id;
33#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
34	atomic_t		slot_refs_count;
35#endif
36	unsigned		slot_mask;
37	unsigned		slots;
38	spinlock_t		irq_lock;
39	struct cb710_slot	slot[];
40};
41
42/* NOTE: cb710_chip.slots is modified only during device init/exit and
43 * they are all serialized wrt themselves */
44
45/* cb710_chip.slot_mask values */
46#define CB710_SLOT_MMC		1
47#define CB710_SLOT_MS		2
48#define CB710_SLOT_SM		4
49
50/* slot port accessors - so the logic is more clear in the code */
51#define CB710_PORT_ACCESSORS(t) \
52static inline void cb710_write_port_##t(struct cb710_slot *slot,	\
53	unsigned port, u##t value)					\
54{									\
55	iowrite##t(value, slot->iobase + port);				\
56}									\
57									\
58static inline u##t cb710_read_port_##t(struct cb710_slot *slot,		\
59	unsigned port)							\
60{									\
61	return ioread##t(slot->iobase + port);				\
62}									\
63									\
64static inline void cb710_modify_port_##t(struct cb710_slot *slot,	\
65	unsigned port, u##t set, u##t clear)				\
66{									\
67	iowrite##t(							\
68		(ioread##t(slot->iobase + port) & ~clear)|set,		\
69		slot->iobase + port);					\
70}
71
72CB710_PORT_ACCESSORS(8)
73CB710_PORT_ACCESSORS(16)
74CB710_PORT_ACCESSORS(32)
75
76void cb710_pci_update_config_reg(struct pci_dev *pdev,
77	int reg, uint32_t and, uint32_t xor);
78void cb710_set_irq_handler(struct cb710_slot *slot,
79	cb710_irq_handler_t handler);
80
81/* some device struct walking */
82
83static inline struct cb710_slot *cb710_pdev_to_slot(
84	struct platform_device *pdev)
85{
86	return container_of(pdev, struct cb710_slot, pdev);
87}
88
89static inline struct cb710_chip *cb710_slot_to_chip(struct cb710_slot *slot)
90{
91	return dev_get_drvdata(slot->pdev.dev.parent);
92}
93
94static inline struct device *cb710_slot_dev(struct cb710_slot *slot)
95{
96	return &slot->pdev.dev;
97}
98
99static inline struct device *cb710_chip_dev(struct cb710_chip *chip)
100{
101	return &chip->pdev->dev;
102}
103
104/* debugging aids */
105
106#ifdef CONFIG_CB710_DEBUG
107void cb710_dump_regs(struct cb710_chip *chip, unsigned dump);
108#else
109#define cb710_dump_regs(c, d) do {} while (0)
110#endif
111
112#define CB710_DUMP_REGS_MMC	0x0F
113#define CB710_DUMP_REGS_MS	0x30
114#define CB710_DUMP_REGS_SM	0xC0
115#define CB710_DUMP_REGS_ALL	0xFF
116#define CB710_DUMP_REGS_MASK	0xFF
117
118#define CB710_DUMP_ACCESS_8	0x100
119#define CB710_DUMP_ACCESS_16	0x200
120#define CB710_DUMP_ACCESS_32	0x400
121#define CB710_DUMP_ACCESS_ALL	0x700
122#define CB710_DUMP_ACCESS_MASK	0x700
123
124#endif /* LINUX_CB710_DRIVER_H */
125/*
126 *  cb710/sgbuf2.h
127 *
128 *  Copyright by Micha�� Miros��aw, 2008-2009
129 */
130#ifndef LINUX_CB710_SG_H
131#define LINUX_CB710_SG_H
132
133#include <linux/highmem.h>
134#include <linux/scatterlist.h>
135
136/*
137 * 32-bit PIO mapping sg iterator
138 *
139 * Hides scatterlist access issues - fragment boundaries, alignment, page
140 * mapping - for drivers using 32-bit-word-at-a-time-PIO (ie. PCI devices
141 * without DMA support).
142 *
143 * Best-case reading (transfer from device):
144 *   sg_miter_start(, SG_MITER_TO_SG);
145 *   cb710_sg_dwiter_write_from_io();
146 *   sg_miter_stop();
147 *
148 * Best-case writing (transfer to device):
149 *   sg_miter_start(, SG_MITER_FROM_SG);
150 *   cb710_sg_dwiter_read_to_io();
151 *   sg_miter_stop();
152 */
153
154uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter);
155void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data);
156
157/**
158 * cb710_sg_dwiter_write_from_io - transfer data to mapped buffer from 32-bit IO port
159 * @miter: sg mapping iter
160 * @port: PIO port - IO or MMIO address
161 * @count: number of 32-bit words to transfer
162 *
163 * Description:
164 *   Reads @count 32-bit words from register @port and stores it in
165 *   buffer iterated by @miter.  Data that would overflow the buffer
166 *   is silently ignored.  Iterator is advanced by 4*@count bytes
167 *   or to the buffer's end whichever is closer.
168 *
169 * Context:
170 *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
171 */
172static inline void cb710_sg_dwiter_write_from_io(struct sg_mapping_iter *miter,
173	void __iomem *port, size_t count)
174{
175	while (count-- > 0)
176		cb710_sg_dwiter_write_next_block(miter, ioread32(port));
177}
178
179/**
180 * cb710_sg_dwiter_read_to_io - transfer data to 32-bit IO port from mapped buffer
181 * @miter: sg mapping iter
182 * @port: PIO port - IO or MMIO address
183 * @count: number of 32-bit words to transfer
184 *
185 * Description:
186 *   Writes @count 32-bit words to register @port from buffer iterated
187 *   through @miter.  If buffer ends before @count words are written
188 *   missing data is replaced by zeroes. @miter is advanced by 4*@count
189 *   bytes or to the buffer's end whichever is closer.
190 *
191 * Context:
192 *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
193 */
194static inline void cb710_sg_dwiter_read_to_io(struct sg_mapping_iter *miter,
195	void __iomem *port, size_t count)
196{
197	while (count-- > 0)
198		iowrite32(cb710_sg_dwiter_read_next_block(miter), port);
199}
200
201#endif /* LINUX_CB710_SG_H */
202