1/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */ 2/****************************************************************************** 3 * 4 * Name: actypes.h - Common data types for the entire ACPI subsystem 5 * 6 * Copyright (C) 2000 - 2023, Intel Corp. 7 * 8 *****************************************************************************/ 9 10#ifndef __ACTYPES_H__ 11#define __ACTYPES_H__ 12 13/* acpisrc:struct_defs -- for acpisrc conversion */ 14 15/* 16 * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent 17 * header and must be either 32 or 64. 16-bit ACPICA is no longer 18 * supported, as of 12/2006. 19 */ 20#ifndef ACPI_MACHINE_WIDTH 21#error ACPI_MACHINE_WIDTH not defined 22#endif 23 24/* 25 * Data type ranges 26 * Note: These macros are designed to be compiler independent as well as 27 * working around problems that some 32-bit compilers have with 64-bit 28 * constants. 29 */ 30#define ACPI_UINT8_MAX (u8) (~((u8) 0)) /* 0xFF */ 31#define ACPI_UINT16_MAX (u16)(~((u16) 0)) /* 0xFFFF */ 32#define ACPI_UINT32_MAX (u32)(~((u32) 0)) /* 0xFFFFFFFF */ 33#define ACPI_UINT64_MAX (u64)(~((u64) 0)) /* 0xFFFFFFFFFFFFFFFF */ 34#define ACPI_ASCII_MAX 0x7F 35 36/* 37 * Architecture-specific ACPICA Subsystem Data Types 38 * 39 * The goal of these types is to provide source code portability across 40 * 16-bit, 32-bit, and 64-bit targets. 41 * 42 * 1) The following types are of fixed size for all targets (16/32/64): 43 * 44 * u8 Logical boolean 45 * 46 * u8 8-bit (1 byte) unsigned value 47 * u16 16-bit (2 byte) unsigned value 48 * u32 32-bit (4 byte) unsigned value 49 * u64 64-bit (8 byte) unsigned value 50 * 51 * s16 16-bit (2 byte) signed value 52 * s32 32-bit (4 byte) signed value 53 * s64 64-bit (8 byte) signed value 54 * 55 * COMPILER_DEPENDENT_UINT64/s64 - These types are defined in the 56 * compiler-dependent header(s) and were introduced because there is no 57 * common 64-bit integer type across the various compilation models, as 58 * shown in the table below. 59 * 60 * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit 61 * char 8 8 8 8 8 8 62 * short 16 16 16 16 16 16 63 * _int32 32 64 * int 32 64 32 32 16 16 65 * long 64 64 32 32 32 32 66 * long long 64 64 67 * pointer 64 64 64 32 32 32 68 * 69 * Note: ILP64 and LP32 are currently not supported. 70 * 71 * 72 * 2) These types represent the native word size of the target mode of the 73 * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are 74 * usually used for memory allocation, efficient loop counters, and array 75 * indexes. The types are similar to the size_t type in the C library and 76 * are required because there is no C type that consistently represents the 77 * native data width. acpi_size is needed because there is no guarantee 78 * that a kernel-level C library is present. 79 * 80 * acpi_size 16/32/64-bit unsigned value 81 * acpi_native_int 16/32/64-bit signed value 82 */ 83 84/******************************************************************************* 85 * 86 * Common types for all compilers, all targets 87 * 88 ******************************************************************************/ 89 90#ifndef ACPI_USE_SYSTEM_INTTYPES 91 92typedef unsigned char u8; 93typedef unsigned short u16; 94typedef short s16; 95typedef COMPILER_DEPENDENT_UINT64 u64; 96typedef COMPILER_DEPENDENT_INT64 s64; 97 98#endif /* ACPI_USE_SYSTEM_INTTYPES */ 99 100/* 101 * Value returned by acpi_os_get_thread_id. There is no standard "thread_id" 102 * across operating systems or even the various UNIX systems. Since ACPICA 103 * only needs the thread ID as a unique thread identifier, we use a u64 104 * as the only common data type - it will accommodate any type of pointer or 105 * any type of integer. It is up to the host-dependent OSL to cast the 106 * native thread ID type to a u64 (in acpi_os_get_thread_id). 107 */ 108#define acpi_thread_id u64 109 110/******************************************************************************* 111 * 112 * Types specific to 64-bit targets 113 * 114 ******************************************************************************/ 115 116#if ACPI_MACHINE_WIDTH == 64 117 118#ifndef ACPI_USE_SYSTEM_INTTYPES 119 120typedef unsigned int u32; 121typedef int s32; 122 123#endif /* ACPI_USE_SYSTEM_INTTYPES */ 124 125typedef s64 acpi_native_int; 126 127typedef u64 acpi_size; 128typedef u64 acpi_io_address; 129typedef u64 acpi_physical_address; 130 131#define ACPI_MAX_PTR ACPI_UINT64_MAX 132#define ACPI_SIZE_MAX ACPI_UINT64_MAX 133 134#define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */ 135#define ACPI_USE_NATIVE_MATH64 /* Has native 64-bit integer support */ 136 137/* 138 * In the case of the Itanium Processor Family (IPF), the hardware does not 139 * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED 140 * flag to indicate that special precautions must be taken to avoid alignment 141 * faults. (IA64 or ia64 is currently used by existing compilers to indicate 142 * IPF.) 143 * 144 * Note: EM64T and other X86-64 processors support misaligned transfers, 145 * so there is no need to define this flag. 146 */ 147#if defined (__IA64__) || defined (__ia64__) 148#define ACPI_MISALIGNMENT_NOT_SUPPORTED 149#endif 150 151/******************************************************************************* 152 * 153 * Types specific to 32-bit targets 154 * 155 ******************************************************************************/ 156 157#elif ACPI_MACHINE_WIDTH == 32 158 159#ifndef ACPI_USE_SYSTEM_INTTYPES 160 161typedef unsigned int u32; 162typedef int s32; 163 164#endif /* ACPI_USE_SYSTEM_INTTYPES */ 165 166typedef s32 acpi_native_int; 167 168typedef u32 acpi_size; 169 170#ifdef ACPI_32BIT_PHYSICAL_ADDRESS 171 172/* 173 * OSPMs can define this to shrink the size of the structures for 32-bit 174 * none PAE environment. ASL compiler may always define this to generate 175 * 32-bit OSPM compliant tables. 176 */ 177typedef u32 acpi_io_address; 178typedef u32 acpi_physical_address; 179 180#else /* ACPI_32BIT_PHYSICAL_ADDRESS */ 181 182/* 183 * It is reported that, after some calculations, the physical addresses can 184 * wrap over the 32-bit boundary on 32-bit PAE environment. 185 * https://bugzilla.kernel.org/show_bug.cgi?id=87971 186 */ 187typedef u64 acpi_io_address; 188typedef u64 acpi_physical_address; 189 190#endif /* ACPI_32BIT_PHYSICAL_ADDRESS */ 191 192#define ACPI_MAX_PTR ACPI_UINT32_MAX 193#define ACPI_SIZE_MAX ACPI_UINT32_MAX 194 195#else 196 197/* ACPI_MACHINE_WIDTH must be either 64 or 32 */ 198 199#error unknown ACPI_MACHINE_WIDTH 200#endif 201 202/******************************************************************************* 203 * 204 * OS-dependent types 205 * 206 * If the defaults below are not appropriate for the host system, they can 207 * be defined in the OS-specific header, and this will take precedence. 208 * 209 ******************************************************************************/ 210 211/* Flags for acpi_os_acquire_lock/acpi_os_release_lock */ 212 213#ifndef acpi_cpu_flags 214#define acpi_cpu_flags acpi_size 215#endif 216 217/* Object returned from acpi_os_create_cache */ 218 219#ifndef acpi_cache_t 220#ifdef ACPI_USE_LOCAL_CACHE 221#define acpi_cache_t struct acpi_memory_list 222#else 223#define acpi_cache_t void * 224#endif 225#endif 226 227/* 228 * Synchronization objects - Mutexes, Semaphores, and spin_locks 229 */ 230#if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE) 231/* 232 * These macros are used if the host OS does not support a mutex object. 233 * Map the OSL Mutex interfaces to binary semaphores. 234 */ 235#define acpi_mutex acpi_semaphore 236#define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle) 237#define acpi_os_delete_mutex(handle) (void) acpi_os_delete_semaphore (handle) 238#define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time) 239#define acpi_os_release_mutex(handle) (void) acpi_os_signal_semaphore (handle, 1) 240#endif 241 242/* Configurable types for synchronization objects */ 243 244#ifndef acpi_spinlock 245#define acpi_spinlock void * 246#endif 247 248#ifndef acpi_raw_spinlock 249#define acpi_raw_spinlock acpi_spinlock 250#endif 251 252#ifndef acpi_semaphore 253#define acpi_semaphore void * 254#endif 255 256#ifndef acpi_mutex 257#define acpi_mutex void * 258#endif 259 260/******************************************************************************* 261 * 262 * Compiler-dependent types 263 * 264 * If the defaults below are not appropriate for the host compiler, they can 265 * be defined in the compiler-specific header, and this will take precedence. 266 * 267 ******************************************************************************/ 268 269/* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */ 270 271#ifndef acpi_uintptr_t 272#define acpi_uintptr_t void * 273#endif 274 275/* 276 * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because 277 * some compilers can catch printf format string problems 278 */ 279#ifndef ACPI_PRINTF_LIKE 280#define ACPI_PRINTF_LIKE(c) 281#endif 282 283/* 284 * Some compilers complain about unused variables. Sometimes we don't want 285 * to use all the variables (for example, _acpi_module_name). This allows us 286 * to tell the compiler in a per-variable manner that a variable 287 * is unused 288 */ 289#ifndef ACPI_UNUSED_VAR 290#define ACPI_UNUSED_VAR 291#endif 292 293/* 294 * All ACPICA external functions that are available to the rest of the 295 * kernel are tagged with these macros which can be defined as appropriate 296 * for the host. 297 * 298 * Notes: 299 * ACPI_EXPORT_SYMBOL_INIT is used for initialization and termination 300 * interfaces that may need special processing. 301 * ACPI_EXPORT_SYMBOL is used for all other public external functions. 302 */ 303#ifndef ACPI_EXPORT_SYMBOL_INIT 304#define ACPI_EXPORT_SYMBOL_INIT(symbol) 305#endif 306 307#ifndef ACPI_EXPORT_SYMBOL 308#define ACPI_EXPORT_SYMBOL(symbol) 309#endif 310 311/* 312 * Compiler/Clibrary-dependent debug initialization. Used for ACPICA 313 * utilities only. 314 */ 315#ifndef ACPI_DEBUG_INITIALIZE 316#define ACPI_DEBUG_INITIALIZE() 317#endif 318 319/******************************************************************************* 320 * 321 * Configuration 322 * 323 ******************************************************************************/ 324 325#ifdef ACPI_NO_MEM_ALLOCATIONS 326 327#define ACPI_ALLOCATE(a) NULL 328#define ACPI_ALLOCATE_ZEROED(a) NULL 329#define ACPI_FREE(a) 330#define ACPI_MEM_TRACKING(a) 331 332#else /* ACPI_NO_MEM_ALLOCATIONS */ 333 334#ifdef ACPI_DBG_TRACK_ALLOCATIONS 335/* 336 * Memory allocation tracking (used by acpi_exec to detect memory leaks) 337 */ 338#define ACPI_MEM_PARAMETERS _COMPONENT, _acpi_module_name, __LINE__ 339#define ACPI_ALLOCATE(a) acpi_ut_allocate_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS) 340#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS) 341#define ACPI_FREE(a) acpi_ut_free_and_track (a, ACPI_MEM_PARAMETERS) 342#define ACPI_MEM_TRACKING(a) a 343 344#else 345/* 346 * Normal memory allocation directly via the OS services layer 347 */ 348#define ACPI_ALLOCATE(a) acpi_os_allocate ((acpi_size) (a)) 349#define ACPI_ALLOCATE_ZEROED(a) acpi_os_allocate_zeroed ((acpi_size) (a)) 350#define ACPI_FREE(a) acpi_os_free (a) 351#define ACPI_MEM_TRACKING(a) 352 353#endif /* ACPI_DBG_TRACK_ALLOCATIONS */ 354 355#endif /* ACPI_NO_MEM_ALLOCATIONS */ 356 357/****************************************************************************** 358 * 359 * ACPI Specification constants (Do not change unless the specification 360 * changes) 361 * 362 *****************************************************************************/ 363 364/* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */ 365 366#define ACPI_MAX_GPE_BLOCKS 2 367 368/* Default ACPI register widths */ 369 370#define ACPI_GPE_REGISTER_WIDTH 8 371#define ACPI_PM1_REGISTER_WIDTH 16 372#define ACPI_PM2_REGISTER_WIDTH 8 373#define ACPI_PM_TIMER_WIDTH 32 374#define ACPI_RESET_REGISTER_WIDTH 8 375 376/* Names within the namespace are 4 bytes long */ 377 378#define ACPI_NAMESEG_SIZE 4 /* Fixed by ACPI spec */ 379#define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ 380#define ACPI_PATH_SEPARATOR '.' 381 382/* Sizes for ACPI table headers */ 383 384#define ACPI_OEM_ID_SIZE 6 385#define ACPI_OEM_TABLE_ID_SIZE 8 386 387/* ACPI/PNP hardware IDs */ 388 389#define PCI_ROOT_HID_STRING "PNP0A03" 390#define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08" 391 392/* PM Timer ticks per second (HZ) */ 393 394#define ACPI_PM_TIMER_FREQUENCY 3579545 395 396/******************************************************************************* 397 * 398 * Independent types 399 * 400 ******************************************************************************/ 401 402/* Logical defines and NULL */ 403 404#ifdef FALSE 405#undef FALSE 406#endif 407#define FALSE (1 == 0) 408 409#ifdef TRUE 410#undef TRUE 411#endif 412#define TRUE (1 == 1) 413 414#ifndef NULL 415#define NULL (void *) 0 416#endif 417 418/* 419 * Miscellaneous types 420 */ 421typedef u32 acpi_status; /* All ACPI Exceptions */ 422typedef u32 acpi_name; /* 4-byte ACPI name */ 423typedef char *acpi_string; /* Null terminated ASCII string */ 424typedef void *acpi_handle; /* Actually a ptr to a NS Node */ 425 426/* Time constants for timer calculations */ 427 428#define ACPI_MSEC_PER_SEC 1000L 429 430#define ACPI_USEC_PER_MSEC 1000L 431#define ACPI_USEC_PER_SEC 1000000L 432 433#define ACPI_100NSEC_PER_USEC 10L 434#define ACPI_100NSEC_PER_MSEC 10000L 435#define ACPI_100NSEC_PER_SEC 10000000L 436 437#define ACPI_NSEC_PER_USEC 1000L 438#define ACPI_NSEC_PER_MSEC 1000000L 439#define ACPI_NSEC_PER_SEC 1000000000L 440 441#define ACPI_TIME_AFTER(a, b) ((s64)((b) - (a)) < 0) 442 443/* Owner IDs are used to track namespace nodes for selective deletion */ 444 445typedef u16 acpi_owner_id; 446#define ACPI_OWNER_ID_MAX 0xFFF /* 4095 possible owner IDs */ 447 448#define ACPI_INTEGER_BIT_SIZE 64 449#define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */ 450#define ACPI_MAX64_DECIMAL_DIGITS 20 451#define ACPI_MAX32_DECIMAL_DIGITS 10 452#define ACPI_MAX16_DECIMAL_DIGITS 5 453#define ACPI_MAX8_DECIMAL_DIGITS 3 454 455/* 456 * Constants with special meanings 457 */ 458#define ACPI_ROOT_OBJECT ((acpi_handle) ACPI_TO_POINTER (ACPI_MAX_PTR)) 459#define ACPI_WAIT_FOREVER 0xFFFF /* u16, as per ACPI spec */ 460#define ACPI_DO_NOT_WAIT 0 461 462/* 463 * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are 464 * 32 bits. In ACPI version 2 (2000) and later, integers are max 64 bits. 465 * Note that this pertains to the ACPI integer type only, not to other 466 * integers used in the implementation of the ACPICA subsystem. 467 * 468 * 01/2010: This type is obsolete and has been removed from the entire ACPICA 469 * code base. It remains here for compatibility with device drivers that use 470 * the type. However, it will be removed in the future. 471 */ 472typedef u64 acpi_integer; 473#define ACPI_INTEGER_MAX ACPI_UINT64_MAX 474 475/******************************************************************************* 476 * 477 * Commonly used macros 478 * 479 ******************************************************************************/ 480 481/* Data manipulation */ 482 483#define ACPI_LOBYTE(integer) ((u8) (u16)(integer)) 484#define ACPI_HIBYTE(integer) ((u8) (((u16)(integer)) >> 8)) 485#define ACPI_LOWORD(integer) ((u16) (u32)(integer)) 486#define ACPI_HIWORD(integer) ((u16)(((u32)(integer)) >> 16)) 487#define ACPI_LODWORD(integer64) ((u32) (u64)(integer64)) 488#define ACPI_HIDWORD(integer64) ((u32)(((u64)(integer64)) >> 32)) 489 490#define ACPI_SET_BIT(target,bit) ((target) |= (bit)) 491#define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit)) 492#define ACPI_MIN(a,b) (((a)<(b))?(a):(b)) 493#define ACPI_MAX(a,b) (((a)>(b))?(a):(b)) 494 495/* Size calculation */ 496 497#define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0])) 498 499/* Pointer manipulation */ 500 501#define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p)) 502#define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p)) 503#define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b))) 504#define ACPI_SUB_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) - (acpi_size)(b))) 505#define ACPI_PTR_DIFF(a, b) ((acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b)))) 506 507/* Pointer/Integer type conversions */ 508 509#define ACPI_TO_POINTER(i) ACPI_CAST_PTR (void, (acpi_size) (i)) 510#ifndef ACPI_TO_INTEGER 511#define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) 0) 512#endif 513#ifndef ACPI_OFFSET 514#define ACPI_OFFSET(d, f) ACPI_PTR_DIFF (&(((d *) 0)->f), (void *) 0) 515#endif 516#define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i) 517 518/* Optimizations for 4-character (32-bit) acpi_name manipulation */ 519 520#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED 521#define ACPI_COMPARE_NAMESEG(a,b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b))) 522#define ACPI_COPY_NAMESEG(dest,src) (*ACPI_CAST_PTR (u32, (dest)) = *ACPI_CAST_PTR (u32, (src))) 523#else 524#define ACPI_COMPARE_NAMESEG(a,b) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAMESEG_SIZE)) 525#define ACPI_COPY_NAMESEG(dest,src) (strncpy (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAMESEG_SIZE)) 526#endif 527 528/* Support for the special RSDP signature (8 characters) */ 529 530#define ACPI_VALIDATE_RSDP_SIG(a) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_SIG_RSDP, 8)) 531#define ACPI_MAKE_RSDP_SIG(dest) (memcpy (ACPI_CAST_PTR (char, (dest)), ACPI_SIG_RSDP, 8)) 532 533/* Support for OEMx signature (x can be any character) */ 534#define ACPI_IS_OEM_SIG(a) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_OEM_NAME, 3) &&\ 535 strnlen (a, ACPI_NAMESEG_SIZE) == ACPI_NAMESEG_SIZE) 536 537/* 538 * Algorithm to obtain access bit or byte width. 539 * Can be used with access_width of struct acpi_generic_address and access_size of 540 * struct acpi_resource_generic_register. 541 */ 542#define ACPI_ACCESS_BIT_SHIFT 2 543#define ACPI_ACCESS_BYTE_SHIFT -1 544#define ACPI_ACCESS_BIT_MAX (31 - ACPI_ACCESS_BIT_SHIFT) 545#define ACPI_ACCESS_BYTE_MAX (31 - ACPI_ACCESS_BYTE_SHIFT) 546#define ACPI_ACCESS_BIT_DEFAULT (8 - ACPI_ACCESS_BIT_SHIFT) 547#define ACPI_ACCESS_BYTE_DEFAULT (8 - ACPI_ACCESS_BYTE_SHIFT) 548#define ACPI_ACCESS_BIT_WIDTH(size) (1 << ((size) + ACPI_ACCESS_BIT_SHIFT)) 549#define ACPI_ACCESS_BYTE_WIDTH(size) (1 << ((size) + ACPI_ACCESS_BYTE_SHIFT)) 550 551/******************************************************************************* 552 * 553 * Miscellaneous constants 554 * 555 ******************************************************************************/ 556 557/* 558 * Initialization sequence options 559 */ 560#define ACPI_FULL_INITIALIZATION 0x0000 561#define ACPI_NO_FACS_INIT 0x0001 562#define ACPI_NO_ACPI_ENABLE 0x0002 563#define ACPI_NO_HARDWARE_INIT 0x0004 564#define ACPI_NO_EVENT_INIT 0x0008 565#define ACPI_NO_HANDLER_INIT 0x0010 566#define ACPI_NO_OBJECT_INIT 0x0020 567#define ACPI_NO_DEVICE_INIT 0x0040 568#define ACPI_NO_ADDRESS_SPACE_INIT 0x0080 569 570/* 571 * Initialization state 572 */ 573#define ACPI_SUBSYSTEM_INITIALIZE 0x01 574#define ACPI_INITIALIZED_OK 0x02 575 576/* 577 * Power state values 578 */ 579#define ACPI_STATE_UNKNOWN (u8) 0xFF 580 581#define ACPI_STATE_S0 (u8) 0 582#define ACPI_STATE_S1 (u8) 1 583#define ACPI_STATE_S2 (u8) 2 584#define ACPI_STATE_S3 (u8) 3 585#define ACPI_STATE_S4 (u8) 4 586#define ACPI_STATE_S5 (u8) 5 587#define ACPI_S_STATES_MAX ACPI_STATE_S5 588#define ACPI_S_STATE_COUNT 6 589 590#define ACPI_STATE_D0 (u8) 0 591#define ACPI_STATE_D1 (u8) 1 592#define ACPI_STATE_D2 (u8) 2 593#define ACPI_STATE_D3_HOT (u8) 3 594#define ACPI_STATE_D3 (u8) 4 595#define ACPI_STATE_D3_COLD ACPI_STATE_D3 596#define ACPI_D_STATES_MAX ACPI_STATE_D3 597#define ACPI_D_STATE_COUNT 5 598 599#define ACPI_STATE_C0 (u8) 0 600#define ACPI_STATE_C1 (u8) 1 601#define ACPI_STATE_C2 (u8) 2 602#define ACPI_STATE_C3 (u8) 3 603#define ACPI_C_STATES_MAX ACPI_STATE_C3 604#define ACPI_C_STATE_COUNT 4 605 606/* 607 * Sleep type invalid value 608 */ 609#define ACPI_SLEEP_TYPE_MAX 0x7 610#define ACPI_SLEEP_TYPE_INVALID 0xFF 611 612/* 613 * Standard notify values 614 */ 615#define ACPI_NOTIFY_BUS_CHECK (u8) 0x00 616#define ACPI_NOTIFY_DEVICE_CHECK (u8) 0x01 617#define ACPI_NOTIFY_DEVICE_WAKE (u8) 0x02 618#define ACPI_NOTIFY_EJECT_REQUEST (u8) 0x03 619#define ACPI_NOTIFY_DEVICE_CHECK_LIGHT (u8) 0x04 620#define ACPI_NOTIFY_FREQUENCY_MISMATCH (u8) 0x05 621#define ACPI_NOTIFY_BUS_MODE_MISMATCH (u8) 0x06 622#define ACPI_NOTIFY_POWER_FAULT (u8) 0x07 623#define ACPI_NOTIFY_CAPABILITIES_CHECK (u8) 0x08 624#define ACPI_NOTIFY_DEVICE_PLD_CHECK (u8) 0x09 625#define ACPI_NOTIFY_RESERVED (u8) 0x0A 626#define ACPI_NOTIFY_LOCALITY_UPDATE (u8) 0x0B 627#define ACPI_NOTIFY_SHUTDOWN_REQUEST (u8) 0x0C 628#define ACPI_NOTIFY_AFFINITY_UPDATE (u8) 0x0D 629#define ACPI_NOTIFY_MEMORY_UPDATE (u8) 0x0E 630#define ACPI_NOTIFY_DISCONNECT_RECOVER (u8) 0x0F 631 632#define ACPI_GENERIC_NOTIFY_MAX 0x0F 633#define ACPI_SPECIFIC_NOTIFY_MAX 0x84 634 635/* 636 * Types associated with ACPI names and objects. The first group of 637 * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition 638 * of the ACPI object_type() operator (See the ACPI Spec). Therefore, 639 * only add to the first group if the spec changes. 640 * 641 * NOTE: Types must be kept in sync with the global acpi_ns_properties 642 * and acpi_ns_type_names arrays. 643 */ 644typedef u32 acpi_object_type; 645 646#define ACPI_TYPE_ANY 0x00 647#define ACPI_TYPE_INTEGER 0x01 /* Byte/Word/Dword/Zero/One/Ones */ 648#define ACPI_TYPE_STRING 0x02 649#define ACPI_TYPE_BUFFER 0x03 650#define ACPI_TYPE_PACKAGE 0x04 /* byte_const, multiple data_term/Constant/super_name */ 651#define ACPI_TYPE_FIELD_UNIT 0x05 652#define ACPI_TYPE_DEVICE 0x06 /* Name, multiple Node */ 653#define ACPI_TYPE_EVENT 0x07 654#define ACPI_TYPE_METHOD 0x08 /* Name, byte_const, multiple Code */ 655#define ACPI_TYPE_MUTEX 0x09 656#define ACPI_TYPE_REGION 0x0A 657#define ACPI_TYPE_POWER 0x0B /* Name,byte_const,word_const,multi Node */ 658#define ACPI_TYPE_PROCESSOR 0x0C /* Name,byte_const,Dword_const,byte_const,multi nm_o */ 659#define ACPI_TYPE_THERMAL 0x0D /* Name, multiple Node */ 660#define ACPI_TYPE_BUFFER_FIELD 0x0E 661#define ACPI_TYPE_DDB_HANDLE 0x0F 662#define ACPI_TYPE_DEBUG_OBJECT 0x10 663 664#define ACPI_TYPE_EXTERNAL_MAX 0x10 665#define ACPI_NUM_TYPES (ACPI_TYPE_EXTERNAL_MAX + 1) 666 667/* 668 * These are object types that do not map directly to the ACPI 669 * object_type() operator. They are used for various internal purposes 670 * only. If new predefined ACPI_TYPEs are added (via the ACPI 671 * specification), these internal types must move upwards. (There 672 * is code that depends on these values being contiguous with the 673 * external types above.) 674 */ 675#define ACPI_TYPE_LOCAL_REGION_FIELD 0x11 676#define ACPI_TYPE_LOCAL_BANK_FIELD 0x12 677#define ACPI_TYPE_LOCAL_INDEX_FIELD 0x13 678#define ACPI_TYPE_LOCAL_REFERENCE 0x14 /* Arg#, Local#, Name, Debug, ref_of, Index */ 679#define ACPI_TYPE_LOCAL_ALIAS 0x15 680#define ACPI_TYPE_LOCAL_METHOD_ALIAS 0x16 681#define ACPI_TYPE_LOCAL_NOTIFY 0x17 682#define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18 683#define ACPI_TYPE_LOCAL_RESOURCE 0x19 684#define ACPI_TYPE_LOCAL_RESOURCE_FIELD 0x1A 685#define ACPI_TYPE_LOCAL_SCOPE 0x1B /* 1 Name, multiple object_list Nodes */ 686 687#define ACPI_TYPE_NS_NODE_MAX 0x1B /* Last typecode used within a NS Node */ 688#define ACPI_TOTAL_TYPES (ACPI_TYPE_NS_NODE_MAX + 1) 689 690/* 691 * These are special object types that never appear in 692 * a Namespace node, only in an object of union acpi_operand_object 693 */ 694#define ACPI_TYPE_LOCAL_EXTRA 0x1C 695#define ACPI_TYPE_LOCAL_DATA 0x1D 696 697#define ACPI_TYPE_LOCAL_MAX 0x1D 698 699/* All types above here are invalid */ 700 701#define ACPI_TYPE_INVALID 0x1E 702#define ACPI_TYPE_NOT_FOUND 0xFF 703 704#define ACPI_NUM_NS_TYPES (ACPI_TYPE_INVALID + 1) 705 706/* 707 * All I/O 708 */ 709#define ACPI_READ 0 710#define ACPI_WRITE 1 711#define ACPI_IO_MASK 1 712 713/* 714 * Event Types: Fixed & General Purpose 715 */ 716typedef u32 acpi_event_type; 717 718/* 719 * Fixed events 720 */ 721#define ACPI_EVENT_PMTIMER 0 722#define ACPI_EVENT_GLOBAL 1 723#define ACPI_EVENT_POWER_BUTTON 2 724#define ACPI_EVENT_SLEEP_BUTTON 3 725#define ACPI_EVENT_RTC 4 726#define ACPI_EVENT_MAX 4 727#define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1 728 729/* 730 * Event status - Per event 731 * ------------- 732 * The encoding of acpi_event_status is illustrated below. 733 * Note that a set bit (1) indicates the property is TRUE 734 * (e.g. if bit 0 is set then the event is enabled). 735 * +-------------+-+-+-+-+-+-+ 736 * | Bits 31:6 |5|4|3|2|1|0| 737 * +-------------+-+-+-+-+-+-+ 738 * | | | | | | | 739 * | | | | | | +- Enabled? 740 * | | | | | +--- Enabled for wake? 741 * | | | | +----- Status bit set? 742 * | | | +------- Enable bit set? 743 * | | +--------- Has a handler? 744 * | +----------- Masked? 745 * +----------------- <Reserved> 746 */ 747typedef u32 acpi_event_status; 748 749#define ACPI_EVENT_FLAG_DISABLED (acpi_event_status) 0x00 750#define ACPI_EVENT_FLAG_ENABLED (acpi_event_status) 0x01 751#define ACPI_EVENT_FLAG_WAKE_ENABLED (acpi_event_status) 0x02 752#define ACPI_EVENT_FLAG_STATUS_SET (acpi_event_status) 0x04 753#define ACPI_EVENT_FLAG_ENABLE_SET (acpi_event_status) 0x08 754#define ACPI_EVENT_FLAG_HAS_HANDLER (acpi_event_status) 0x10 755#define ACPI_EVENT_FLAG_MASKED (acpi_event_status) 0x20 756#define ACPI_EVENT_FLAG_SET ACPI_EVENT_FLAG_STATUS_SET 757 758/* Actions for acpi_set_gpe, acpi_gpe_wakeup, acpi_hw_low_set_gpe */ 759 760#define ACPI_GPE_ENABLE 0 761#define ACPI_GPE_DISABLE 1 762#define ACPI_GPE_CONDITIONAL_ENABLE 2 763 764/* 765 * GPE info flags - Per GPE 766 * +---+-+-+-+---+ 767 * |7:6|5|4|3|2:0| 768 * +---+-+-+-+---+ 769 * | | | | | 770 * | | | | +-- Type of dispatch:to method, handler, notify, or none 771 * | | | +----- Interrupt type: edge or level triggered 772 * | | +------- Is a Wake GPE 773 * | +--------- Has been enabled automatically at init time 774 * +------------ <Reserved> 775 */ 776#define ACPI_GPE_DISPATCH_NONE (u8) 0x00 777#define ACPI_GPE_DISPATCH_METHOD (u8) 0x01 778#define ACPI_GPE_DISPATCH_HANDLER (u8) 0x02 779#define ACPI_GPE_DISPATCH_NOTIFY (u8) 0x03 780#define ACPI_GPE_DISPATCH_RAW_HANDLER (u8) 0x04 781#define ACPI_GPE_DISPATCH_MASK (u8) 0x07 782#define ACPI_GPE_DISPATCH_TYPE(flags) ((u8) ((flags) & ACPI_GPE_DISPATCH_MASK)) 783 784#define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x08 785#define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00 786#define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x08 787 788#define ACPI_GPE_CAN_WAKE (u8) 0x10 789#define ACPI_GPE_AUTO_ENABLED (u8) 0x20 790#define ACPI_GPE_INITIALIZED (u8) 0x40 791 792/* 793 * Flags for GPE and Lock interfaces 794 */ 795#define ACPI_NOT_ISR 0x1 796#define ACPI_ISR 0x0 797 798/* Notify types */ 799 800#define ACPI_SYSTEM_NOTIFY 0x1 801#define ACPI_DEVICE_NOTIFY 0x2 802#define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY) 803#define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3 804#define ACPI_NUM_NOTIFY_TYPES 2 805 806#define ACPI_MAX_SYS_NOTIFY 0x7F 807#define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF 808 809#define ACPI_SYSTEM_HANDLER_LIST 0 /* Used as index, must be SYSTEM_NOTIFY -1 */ 810#define ACPI_DEVICE_HANDLER_LIST 1 /* Used as index, must be DEVICE_NOTIFY -1 */ 811 812/* Address Space (Operation Region) Types */ 813 814typedef u8 acpi_adr_space_type; 815 816#define ACPI_ADR_SPACE_SYSTEM_MEMORY (acpi_adr_space_type) 0 817#define ACPI_ADR_SPACE_SYSTEM_IO (acpi_adr_space_type) 1 818#define ACPI_ADR_SPACE_PCI_CONFIG (acpi_adr_space_type) 2 819#define ACPI_ADR_SPACE_EC (acpi_adr_space_type) 3 820#define ACPI_ADR_SPACE_SMBUS (acpi_adr_space_type) 4 821#define ACPI_ADR_SPACE_CMOS (acpi_adr_space_type) 5 822#define ACPI_ADR_SPACE_PCI_BAR_TARGET (acpi_adr_space_type) 6 823#define ACPI_ADR_SPACE_IPMI (acpi_adr_space_type) 7 824#define ACPI_ADR_SPACE_GPIO (acpi_adr_space_type) 8 825#define ACPI_ADR_SPACE_GSBUS (acpi_adr_space_type) 9 826#define ACPI_ADR_SPACE_PLATFORM_COMM (acpi_adr_space_type) 10 827#define ACPI_ADR_SPACE_PLATFORM_RT (acpi_adr_space_type) 11 828 829#define ACPI_NUM_PREDEFINED_REGIONS 12 830 831/* 832 * Special Address Spaces 833 * 834 * Note: A Data Table region is a special type of operation region 835 * that has its own AML opcode. However, internally, the AML 836 * interpreter simply creates an operation region with an address 837 * space type of ACPI_ADR_SPACE_DATA_TABLE. 838 */ 839#define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 0x7E /* Internal to ACPICA only */ 840#define ACPI_ADR_SPACE_FIXED_HARDWARE (acpi_adr_space_type) 0x7F 841 842/* Values for _REG connection code */ 843 844#define ACPI_REG_DISCONNECT 0 845#define ACPI_REG_CONNECT 1 846 847/* 848 * bit_register IDs 849 * 850 * These values are intended to be used by the hardware interfaces 851 * and are mapped to individual bitfields defined within the ACPI 852 * registers. See the acpi_gbl_bit_register_info global table in utglobal.c 853 * for this mapping. 854 */ 855 856/* PM1 Status register */ 857 858#define ACPI_BITREG_TIMER_STATUS 0x00 859#define ACPI_BITREG_BUS_MASTER_STATUS 0x01 860#define ACPI_BITREG_GLOBAL_LOCK_STATUS 0x02 861#define ACPI_BITREG_POWER_BUTTON_STATUS 0x03 862#define ACPI_BITREG_SLEEP_BUTTON_STATUS 0x04 863#define ACPI_BITREG_RT_CLOCK_STATUS 0x05 864#define ACPI_BITREG_WAKE_STATUS 0x06 865#define ACPI_BITREG_PCIEXP_WAKE_STATUS 0x07 866 867/* PM1 Enable register */ 868 869#define ACPI_BITREG_TIMER_ENABLE 0x08 870#define ACPI_BITREG_GLOBAL_LOCK_ENABLE 0x09 871#define ACPI_BITREG_POWER_BUTTON_ENABLE 0x0A 872#define ACPI_BITREG_SLEEP_BUTTON_ENABLE 0x0B 873#define ACPI_BITREG_RT_CLOCK_ENABLE 0x0C 874#define ACPI_BITREG_PCIEXP_WAKE_DISABLE 0x0D 875 876/* PM1 Control register */ 877 878#define ACPI_BITREG_SCI_ENABLE 0x0E 879#define ACPI_BITREG_BUS_MASTER_RLD 0x0F 880#define ACPI_BITREG_GLOBAL_LOCK_RELEASE 0x10 881#define ACPI_BITREG_SLEEP_TYPE 0x11 882#define ACPI_BITREG_SLEEP_ENABLE 0x12 883 884/* PM2 Control register */ 885 886#define ACPI_BITREG_ARB_DISABLE 0x13 887 888#define ACPI_BITREG_MAX 0x13 889#define ACPI_NUM_BITREG ACPI_BITREG_MAX + 1 890 891/* Status register values. A 1 clears a status bit. 0 = no effect */ 892 893#define ACPI_CLEAR_STATUS 1 894 895/* Enable and Control register values */ 896 897#define ACPI_ENABLE_EVENT 1 898#define ACPI_DISABLE_EVENT 0 899 900/* 901 * External ACPI object definition 902 */ 903 904/* 905 * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package 906 * element or an unresolved named reference. 907 */ 908union acpi_object { 909 acpi_object_type type; /* See definition of acpi_ns_type for values */ 910 struct { 911 acpi_object_type type; /* ACPI_TYPE_INTEGER */ 912 u64 value; /* The actual number */ 913 } integer; 914 915 struct { 916 acpi_object_type type; /* ACPI_TYPE_STRING */ 917 u32 length; /* # of bytes in string, excluding trailing null */ 918 char *pointer; /* points to the string value */ 919 } string; 920 921 struct { 922 acpi_object_type type; /* ACPI_TYPE_BUFFER */ 923 u32 length; /* # of bytes in buffer */ 924 u8 *pointer; /* points to the buffer */ 925 } buffer; 926 927 struct { 928 acpi_object_type type; /* ACPI_TYPE_PACKAGE */ 929 u32 count; /* # of elements in package */ 930 union acpi_object *elements; /* Pointer to an array of ACPI_OBJECTs */ 931 } package; 932 933 struct { 934 acpi_object_type type; /* ACPI_TYPE_LOCAL_REFERENCE */ 935 acpi_object_type actual_type; /* Type associated with the Handle */ 936 acpi_handle handle; /* object reference */ 937 } reference; 938 939 struct { 940 acpi_object_type type; /* ACPI_TYPE_PROCESSOR */ 941 u32 proc_id; 942 acpi_io_address pblk_address; 943 u32 pblk_length; 944 } processor; 945 946 struct { 947 acpi_object_type type; /* ACPI_TYPE_POWER */ 948 u32 system_level; 949 u32 resource_order; 950 } power_resource; 951}; 952 953/* 954 * List of objects, used as a parameter list for control method evaluation 955 */ 956struct acpi_object_list { 957 u32 count; 958 union acpi_object *pointer; 959}; 960 961/* 962 * Miscellaneous common Data Structures used by the interfaces 963 */ 964#define ACPI_NO_BUFFER 0 965 966#ifdef ACPI_NO_MEM_ALLOCATIONS 967 968#define ACPI_ALLOCATE_BUFFER (acpi_size) (0) 969#define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (0) 970 971#else /* ACPI_NO_MEM_ALLOCATIONS */ 972 973#define ACPI_ALLOCATE_BUFFER (acpi_size) (-1) /* Let ACPICA allocate buffer */ 974#define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (-2) /* For internal use only (enables tracking) */ 975 976#endif /* ACPI_NO_MEM_ALLOCATIONS */ 977 978struct acpi_buffer { 979 acpi_size length; /* Length in bytes of the buffer */ 980 void *pointer; /* pointer to buffer */ 981}; 982 983/* 984 * name_type for acpi_get_name 985 */ 986#define ACPI_FULL_PATHNAME 0 987#define ACPI_SINGLE_NAME 1 988#define ACPI_FULL_PATHNAME_NO_TRAILING 2 989#define ACPI_NAME_TYPE_MAX 2 990 991/* 992 * Predefined Namespace items 993 */ 994struct acpi_predefined_names { 995 const char *name; 996 u8 type; 997 char *val; 998}; 999 1000/* 1001 * Structure and flags for acpi_get_system_info 1002 */ 1003#define ACPI_SYS_MODE_UNKNOWN 0x0000 1004#define ACPI_SYS_MODE_ACPI 0x0001 1005#define ACPI_SYS_MODE_LEGACY 0x0002 1006#define ACPI_SYS_MODES_MASK 0x0003 1007 1008/* 1009 * System info returned by acpi_get_system_info() 1010 */ 1011struct acpi_system_info { 1012 u32 acpi_ca_version; 1013 u32 flags; 1014 u32 timer_resolution; 1015 u32 reserved1; 1016 u32 reserved2; 1017 u32 debug_level; 1018 u32 debug_layer; 1019}; 1020 1021/* 1022 * System statistics returned by acpi_get_statistics() 1023 */ 1024struct acpi_statistics { 1025 u32 sci_count; 1026 u32 gpe_count; 1027 u32 fixed_event_count[ACPI_NUM_FIXED_EVENTS]; 1028 u32 method_count; 1029}; 1030 1031/* 1032 * Types specific to the OS service interfaces 1033 */ 1034typedef u32 1035 (ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context); 1036 1037typedef void 1038 (ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context); 1039 1040/* 1041 * Various handlers and callback procedures 1042 */ 1043typedef 1044u32 (*acpi_sci_handler) (void *context); 1045 1046typedef 1047void (*acpi_gbl_event_handler) (u32 event_type, 1048 acpi_handle device, 1049 u32 event_number, void *context); 1050 1051#define ACPI_EVENT_TYPE_GPE 0 1052#define ACPI_EVENT_TYPE_FIXED 1 1053 1054typedef 1055u32(*acpi_event_handler) (void *context); 1056 1057typedef 1058u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context); 1059 1060typedef 1061void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context); 1062 1063typedef 1064void (*acpi_object_handler) (acpi_handle object, void *data); 1065 1066typedef 1067acpi_status (*acpi_init_handler) (acpi_handle object, u32 function); 1068 1069#define ACPI_INIT_DEVICE_INI 1 1070 1071typedef 1072acpi_status (*acpi_exception_handler) (acpi_status aml_status, 1073 acpi_name name, 1074 u16 opcode, 1075 u32 aml_offset, void *context); 1076 1077/* Table Event handler (Load, load_table, etc.) and types */ 1078 1079typedef 1080acpi_status (*acpi_table_handler) (u32 event, void *table, void *context); 1081 1082/* Table Event Types */ 1083 1084#define ACPI_TABLE_EVENT_LOAD 0x0 1085#define ACPI_TABLE_EVENT_UNLOAD 0x1 1086#define ACPI_TABLE_EVENT_INSTALL 0x2 1087#define ACPI_TABLE_EVENT_UNINSTALL 0x3 1088#define ACPI_NUM_TABLE_EVENTS 4 1089 1090/* Address Spaces (For Operation Regions) */ 1091 1092typedef 1093acpi_status (*acpi_adr_space_handler) (u32 function, 1094 acpi_physical_address address, 1095 u32 bit_width, 1096 u64 *value, 1097 void *handler_context, 1098 void *region_context); 1099 1100#define ACPI_DEFAULT_HANDLER NULL 1101 1102/* Special Context data for generic_serial_bus/general_purpose_io (ACPI 5.0) */ 1103 1104struct acpi_connection_info { 1105 u8 *connection; 1106 u16 length; 1107 u8 access_length; 1108}; 1109 1110/* Special Context data for PCC Opregion (ACPI 6.3) */ 1111 1112struct acpi_pcc_info { 1113 u8 subspace_id; 1114 u16 length; 1115 u8 *internal_buffer; 1116}; 1117 1118/* Special Context data for FFH Opregion (ACPI 6.5) */ 1119 1120struct acpi_ffh_info { 1121 u64 offset; 1122 u64 length; 1123}; 1124 1125typedef 1126acpi_status (*acpi_adr_space_setup) (acpi_handle region_handle, 1127 u32 function, 1128 void *handler_context, 1129 void **region_context); 1130 1131#define ACPI_REGION_ACTIVATE 0 1132#define ACPI_REGION_DEACTIVATE 1 1133 1134typedef 1135acpi_status (*acpi_walk_callback) (acpi_handle object, 1136 u32 nesting_level, 1137 void *context, void **return_value); 1138 1139typedef 1140u32 (*acpi_interface_handler) (acpi_string interface_name, u32 supported); 1141 1142/* Interrupt handler return values */ 1143 1144#define ACPI_INTERRUPT_NOT_HANDLED 0x00 1145#define ACPI_INTERRUPT_HANDLED 0x01 1146 1147/* GPE handler return values */ 1148 1149#define ACPI_REENABLE_GPE 0x80 1150 1151/* Length of 32-bit EISAID values when converted back to a string */ 1152 1153#define ACPI_EISAID_STRING_SIZE 8 /* Includes null terminator */ 1154 1155/* Length of UUID (string) values */ 1156 1157#define ACPI_UUID_LENGTH 16 1158 1159/* Length of 3-byte PCI class code values when converted back to a string */ 1160 1161#define ACPI_PCICLS_STRING_SIZE 7 /* Includes null terminator */ 1162 1163/* Structures used for device/processor HID, UID, CID */ 1164 1165struct acpi_pnp_device_id { 1166 u32 length; /* Length of string + null */ 1167 char *string; 1168}; 1169 1170struct acpi_pnp_device_id_list { 1171 u32 count; /* Number of IDs in Ids array */ 1172 u32 list_size; /* Size of list, including ID strings */ 1173 struct acpi_pnp_device_id ids[]; /* ID array */ 1174}; 1175 1176/* 1177 * Structure returned from acpi_get_object_info. 1178 * Optimized for both 32-bit and 64-bit builds. 1179 */ 1180struct acpi_device_info { 1181 u32 info_size; /* Size of info, including ID strings */ 1182 u32 name; /* ACPI object Name */ 1183 acpi_object_type type; /* ACPI object Type */ 1184 u8 param_count; /* If a method, required parameter count */ 1185 u16 valid; /* Indicates which optional fields are valid */ 1186 u8 flags; /* Miscellaneous info */ 1187 u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */ 1188 u8 lowest_dstates[5]; /* _sx_w values: 0xFF indicates not valid */ 1189 u64 address; /* _ADR value */ 1190 struct acpi_pnp_device_id hardware_id; /* _HID value */ 1191 struct acpi_pnp_device_id unique_id; /* _UID value */ 1192 struct acpi_pnp_device_id class_code; /* _CLS value */ 1193 struct acpi_pnp_device_id_list compatible_id_list; /* _CID list <must be last> */ 1194}; 1195 1196/* Values for Flags field above (acpi_get_object_info) */ 1197 1198#define ACPI_PCI_ROOT_BRIDGE 0x01 1199 1200/* Flags for Valid field above (acpi_get_object_info) */ 1201 1202#define ACPI_VALID_ADR 0x0002 1203#define ACPI_VALID_HID 0x0004 1204#define ACPI_VALID_UID 0x0008 1205#define ACPI_VALID_CID 0x0020 1206#define ACPI_VALID_CLS 0x0040 1207#define ACPI_VALID_SXDS 0x0100 1208#define ACPI_VALID_SXWS 0x0200 1209 1210/* Flags for _STA method */ 1211 1212#define ACPI_STA_DEVICE_PRESENT 0x01 1213#define ACPI_STA_DEVICE_ENABLED 0x02 1214#define ACPI_STA_DEVICE_UI 0x04 1215#define ACPI_STA_DEVICE_FUNCTIONING 0x08 1216#define ACPI_STA_DEVICE_OK 0x08 /* Synonym */ 1217#define ACPI_STA_BATTERY_PRESENT 0x10 1218 1219/* Context structs for address space handlers */ 1220 1221struct acpi_pci_id { 1222 u16 segment; 1223 u16 bus; 1224 u16 device; 1225 u16 function; 1226}; 1227 1228struct acpi_mem_mapping { 1229 acpi_physical_address physical_address; 1230 u8 *logical_address; 1231 acpi_size length; 1232 struct acpi_mem_mapping *next_mm; 1233}; 1234 1235struct acpi_mem_space_context { 1236 u32 length; 1237 acpi_physical_address address; 1238 struct acpi_mem_mapping *cur_mm; 1239 struct acpi_mem_mapping *first_mm; 1240}; 1241 1242struct acpi_data_table_mapping { 1243 void *pointer; 1244}; 1245 1246/* 1247 * struct acpi_memory_list is used only if the ACPICA local cache is enabled 1248 */ 1249struct acpi_memory_list { 1250 const char *list_name; 1251 void *list_head; 1252 u16 object_size; 1253 u16 max_depth; 1254 u16 current_depth; 1255 1256#ifdef ACPI_DBG_TRACK_ALLOCATIONS 1257 1258 /* Statistics for debug memory tracking only */ 1259 1260 u32 total_allocated; 1261 u32 total_freed; 1262 u32 max_occupied; 1263 u32 total_size; 1264 u32 current_total_size; 1265 u32 requests; 1266 u32 hits; 1267#endif 1268}; 1269 1270/* Definitions of trace event types */ 1271 1272typedef enum { 1273 ACPI_TRACE_AML_METHOD, 1274 ACPI_TRACE_AML_OPCODE, 1275 ACPI_TRACE_AML_REGION 1276} acpi_trace_event_type; 1277 1278/* Definitions of _OSI support */ 1279 1280#define ACPI_VENDOR_STRINGS 0x01 1281#define ACPI_FEATURE_STRINGS 0x02 1282#define ACPI_ENABLE_INTERFACES 0x00 1283#define ACPI_DISABLE_INTERFACES 0x04 1284 1285#define ACPI_DISABLE_ALL_VENDOR_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS) 1286#define ACPI_DISABLE_ALL_FEATURE_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_FEATURE_STRINGS) 1287#define ACPI_DISABLE_ALL_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS) 1288#define ACPI_ENABLE_ALL_VENDOR_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS) 1289#define ACPI_ENABLE_ALL_FEATURE_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_FEATURE_STRINGS) 1290#define ACPI_ENABLE_ALL_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS) 1291 1292#define ACPI_OSI_WIN_2000 0x01 1293#define ACPI_OSI_WIN_XP 0x02 1294#define ACPI_OSI_WIN_XP_SP1 0x03 1295#define ACPI_OSI_WINSRV_2003 0x04 1296#define ACPI_OSI_WIN_XP_SP2 0x05 1297#define ACPI_OSI_WINSRV_2003_SP1 0x06 1298#define ACPI_OSI_WIN_VISTA 0x07 1299#define ACPI_OSI_WINSRV_2008 0x08 1300#define ACPI_OSI_WIN_VISTA_SP1 0x09 1301#define ACPI_OSI_WIN_VISTA_SP2 0x0A 1302#define ACPI_OSI_WIN_7 0x0B 1303#define ACPI_OSI_WIN_8 0x0C 1304#define ACPI_OSI_WIN_8_1 0x0D 1305#define ACPI_OSI_WIN_10 0x0E 1306#define ACPI_OSI_WIN_10_RS1 0x0F 1307#define ACPI_OSI_WIN_10_RS2 0x10 1308#define ACPI_OSI_WIN_10_RS3 0x11 1309#define ACPI_OSI_WIN_10_RS4 0x12 1310#define ACPI_OSI_WIN_10_RS5 0x13 1311#define ACPI_OSI_WIN_10_19H1 0x14 1312#define ACPI_OSI_WIN_10_20H1 0x15 1313#define ACPI_OSI_WIN_11 0x16 1314 1315/* Definitions of getopt */ 1316 1317#define ACPI_OPT_END -1 1318 1319/* Definitions for explicit fallthrough */ 1320 1321#ifndef ACPI_FALLTHROUGH 1322#define ACPI_FALLTHROUGH do {} while(0) 1323#endif 1324 1325#ifndef ACPI_FLEX_ARRAY 1326#define ACPI_FLEX_ARRAY(TYPE, NAME) TYPE NAME[0] 1327#endif 1328 1329#endif /* __ACTYPES_H__ */ 1330