1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright 2016-2017 Google, Inc
4 *
5 * Fairchild FUSB302 Type-C Chip Driver
6 */
7
8#include <linux/debugfs.h>
9#include <linux/delay.h>
10#include <linux/errno.h>
11#include <linux/extcon.h>
12#include <linux/gpio/consumer.h>
13#include <linux/i2c.h>
14#include <linux/interrupt.h>
15#include <linux/kernel.h>
16#include <linux/module.h>
17#include <linux/mutex.h>
18#include <linux/of.h>
19#include <linux/pinctrl/consumer.h>
20#include <linux/proc_fs.h>
21#include <linux/regulator/consumer.h>
22#include <linux/sched/clock.h>
23#include <linux/seq_file.h>
24#include <linux/slab.h>
25#include <linux/spinlock.h>
26#include <linux/string.h>
27#include <linux/types.h>
28#include <linux/usb.h>
29#include <linux/usb/typec.h>
30#include <linux/usb/tcpm.h>
31#include <linux/usb/pd.h>
32#include <linux/workqueue.h>
33
34#include "fusb302_reg.h"
35
36/*
37 * When the device is SNK, BC_LVL interrupt is used to monitor cc pins
38 * for the current capability offered by the SRC. As FUSB302 chip fires
39 * the BC_LVL interrupt on PD signalings, cc lvl should be handled after
40 * a delay to avoid measuring on PD activities. The delay is slightly
41 * longer than PD_T_PD_DEBPUNCE (10-20ms).
42 */
43#define T_BC_LVL_DEBOUNCE_DELAY_MS 30
44
45enum toggling_mode {
46	TOGGLING_MODE_OFF,
47	TOGGLING_MODE_DRP,
48	TOGGLING_MODE_SNK,
49	TOGGLING_MODE_SRC,
50};
51
52enum src_current_status {
53	SRC_CURRENT_DEFAULT,
54	SRC_CURRENT_MEDIUM,
55	SRC_CURRENT_HIGH,
56};
57
58static const u8 ra_mda_value[] = {
59	[SRC_CURRENT_DEFAULT] = 4,	/* 210mV */
60	[SRC_CURRENT_MEDIUM] = 9,	/* 420mV */
61	[SRC_CURRENT_HIGH] = 18,	/* 798mV */
62};
63
64static const u8 rd_mda_value[] = {
65	[SRC_CURRENT_DEFAULT] = 38,	/* 1638mV */
66	[SRC_CURRENT_MEDIUM] = 38,	/* 1638mV */
67	[SRC_CURRENT_HIGH] = 61,	/* 2604mV */
68};
69
70#define LOG_BUFFER_ENTRIES	1024
71#define LOG_BUFFER_ENTRY_SIZE	128
72
73struct fusb302_chip {
74	struct device *dev;
75	struct i2c_client *i2c_client;
76	struct tcpm_port *tcpm_port;
77	struct tcpc_dev tcpc_dev;
78
79	struct regulator *vbus;
80
81	spinlock_t irq_lock;
82	struct work_struct irq_work;
83	bool irq_suspended;
84	bool irq_while_suspended;
85	struct gpio_desc *gpio_int_n;
86	int gpio_int_n_irq;
87	struct extcon_dev *extcon;
88
89	struct workqueue_struct *wq;
90	struct delayed_work bc_lvl_handler;
91
92	/* lock for sharing chip states */
93	struct mutex lock;
94
95	/* chip status */
96	enum toggling_mode toggling_mode;
97	enum src_current_status src_current_status;
98	bool intr_togdone;
99	bool intr_bc_lvl;
100	bool intr_comp_chng;
101
102	/* port status */
103	bool vconn_on;
104	bool vbus_on;
105	bool charge_on;
106	bool vbus_present;
107	enum typec_cc_polarity cc_polarity;
108	enum typec_cc_status cc1;
109	enum typec_cc_status cc2;
110	u32 snk_pdo[PDO_MAX_OBJECTS];
111
112#ifdef CONFIG_DEBUG_FS
113	struct dentry *dentry;
114	/* lock for log buffer access */
115	struct mutex logbuffer_lock;
116	int logbuffer_head;
117	int logbuffer_tail;
118	u8 *logbuffer[LOG_BUFFER_ENTRIES];
119#endif
120};
121
122/*
123 * Logging
124 */
125
126#ifdef CONFIG_DEBUG_FS
127static bool fusb302_log_full(struct fusb302_chip *chip)
128{
129	return chip->logbuffer_tail ==
130		(chip->logbuffer_head + 1) % LOG_BUFFER_ENTRIES;
131}
132
133__printf(2, 0)
134static void _fusb302_log(struct fusb302_chip *chip, const char *fmt,
135			 va_list args)
136{
137	char tmpbuffer[LOG_BUFFER_ENTRY_SIZE];
138	u64 ts_nsec = local_clock();
139	unsigned long rem_nsec;
140
141	if (!chip->logbuffer[chip->logbuffer_head]) {
142		chip->logbuffer[chip->logbuffer_head] =
143				kzalloc(LOG_BUFFER_ENTRY_SIZE, GFP_KERNEL);
144		if (!chip->logbuffer[chip->logbuffer_head])
145			return;
146	}
147
148	vsnprintf(tmpbuffer, sizeof(tmpbuffer), fmt, args);
149
150	mutex_lock(&chip->logbuffer_lock);
151
152	if (fusb302_log_full(chip)) {
153		chip->logbuffer_head = max(chip->logbuffer_head - 1, 0);
154		strscpy(tmpbuffer, "overflow", sizeof(tmpbuffer));
155	}
156
157	if (chip->logbuffer_head < 0 ||
158	    chip->logbuffer_head >= LOG_BUFFER_ENTRIES) {
159		dev_warn(chip->dev,
160			 "Bad log buffer index %d\n", chip->logbuffer_head);
161		goto abort;
162	}
163
164	if (!chip->logbuffer[chip->logbuffer_head]) {
165		dev_warn(chip->dev,
166			 "Log buffer index %d is NULL\n", chip->logbuffer_head);
167		goto abort;
168	}
169
170	rem_nsec = do_div(ts_nsec, 1000000000);
171	scnprintf(chip->logbuffer[chip->logbuffer_head],
172		  LOG_BUFFER_ENTRY_SIZE, "[%5lu.%06lu] %s",
173		  (unsigned long)ts_nsec, rem_nsec / 1000,
174		  tmpbuffer);
175	chip->logbuffer_head = (chip->logbuffer_head + 1) % LOG_BUFFER_ENTRIES;
176
177abort:
178	mutex_unlock(&chip->logbuffer_lock);
179}
180
181__printf(2, 3)
182static void fusb302_log(struct fusb302_chip *chip, const char *fmt, ...)
183{
184	va_list args;
185
186	va_start(args, fmt);
187	_fusb302_log(chip, fmt, args);
188	va_end(args);
189}
190
191static int fusb302_debug_show(struct seq_file *s, void *v)
192{
193	struct fusb302_chip *chip = s->private;
194	int tail;
195
196	mutex_lock(&chip->logbuffer_lock);
197	tail = chip->logbuffer_tail;
198	while (tail != chip->logbuffer_head) {
199		seq_printf(s, "%s\n", chip->logbuffer[tail]);
200		tail = (tail + 1) % LOG_BUFFER_ENTRIES;
201	}
202	if (!seq_has_overflowed(s))
203		chip->logbuffer_tail = tail;
204	mutex_unlock(&chip->logbuffer_lock);
205
206	return 0;
207}
208DEFINE_SHOW_ATTRIBUTE(fusb302_debug);
209
210static void fusb302_debugfs_init(struct fusb302_chip *chip)
211{
212	char name[NAME_MAX];
213
214	mutex_init(&chip->logbuffer_lock);
215	snprintf(name, NAME_MAX, "fusb302-%s", dev_name(chip->dev));
216	chip->dentry = debugfs_create_dir(name, usb_debug_root);
217	debugfs_create_file("log", S_IFREG | 0444, chip->dentry, chip,
218			    &fusb302_debug_fops);
219}
220
221static void fusb302_debugfs_exit(struct fusb302_chip *chip)
222{
223	debugfs_remove(chip->dentry);
224}
225
226#else
227
228static void fusb302_log(const struct fusb302_chip *chip,
229			const char *fmt, ...) { }
230static void fusb302_debugfs_init(const struct fusb302_chip *chip) { }
231static void fusb302_debugfs_exit(const struct fusb302_chip *chip) { }
232
233#endif
234
235static int fusb302_i2c_write(struct fusb302_chip *chip,
236			     u8 address, u8 data)
237{
238	int ret = 0;
239
240	ret = i2c_smbus_write_byte_data(chip->i2c_client, address, data);
241	if (ret < 0)
242		fusb302_log(chip, "cannot write 0x%02x to 0x%02x, ret=%d",
243			    data, address, ret);
244
245	return ret;
246}
247
248static int fusb302_i2c_block_write(struct fusb302_chip *chip, u8 address,
249				   u8 length, const u8 *data)
250{
251	int ret = 0;
252
253	if (length <= 0)
254		return ret;
255
256	ret = i2c_smbus_write_i2c_block_data(chip->i2c_client, address,
257					     length, data);
258	if (ret < 0)
259		fusb302_log(chip, "cannot block write 0x%02x, len=%d, ret=%d",
260			    address, length, ret);
261
262	return ret;
263}
264
265static int fusb302_i2c_read(struct fusb302_chip *chip,
266			    u8 address, u8 *data)
267{
268	int ret = 0;
269
270	ret = i2c_smbus_read_byte_data(chip->i2c_client, address);
271	*data = (u8)ret;
272	if (ret < 0)
273		fusb302_log(chip, "cannot read %02x, ret=%d", address, ret);
274
275	return ret;
276}
277
278static int fusb302_i2c_block_read(struct fusb302_chip *chip, u8 address,
279				  u8 length, u8 *data)
280{
281	int ret = 0;
282
283	if (length <= 0)
284		return ret;
285
286	ret = i2c_smbus_read_i2c_block_data(chip->i2c_client, address,
287					    length, data);
288	if (ret < 0) {
289		fusb302_log(chip, "cannot block read 0x%02x, len=%d, ret=%d",
290			    address, length, ret);
291		goto done;
292	}
293	if (ret != length) {
294		fusb302_log(chip, "only read %d/%d bytes from 0x%02x",
295			    ret, length, address);
296		ret = -EIO;
297	}
298
299done:
300	return ret;
301}
302
303static int fusb302_i2c_mask_write(struct fusb302_chip *chip, u8 address,
304				  u8 mask, u8 value)
305{
306	int ret = 0;
307	u8 data;
308
309	ret = fusb302_i2c_read(chip, address, &data);
310	if (ret < 0)
311		return ret;
312	data &= ~mask;
313	data |= value;
314	ret = fusb302_i2c_write(chip, address, data);
315	if (ret < 0)
316		return ret;
317
318	return ret;
319}
320
321static int fusb302_i2c_set_bits(struct fusb302_chip *chip, u8 address,
322				u8 set_bits)
323{
324	return fusb302_i2c_mask_write(chip, address, 0x00, set_bits);
325}
326
327static int fusb302_i2c_clear_bits(struct fusb302_chip *chip, u8 address,
328				  u8 clear_bits)
329{
330	return fusb302_i2c_mask_write(chip, address, clear_bits, 0x00);
331}
332
333static int fusb302_sw_reset(struct fusb302_chip *chip)
334{
335	int ret = 0;
336
337	ret = fusb302_i2c_write(chip, FUSB_REG_RESET,
338				FUSB_REG_RESET_SW_RESET);
339	if (ret < 0)
340		fusb302_log(chip, "cannot sw reset the chip, ret=%d", ret);
341	else
342		fusb302_log(chip, "sw reset");
343
344	return ret;
345}
346
347static int fusb302_enable_tx_auto_retries(struct fusb302_chip *chip, u8 retry_count)
348{
349	int ret = 0;
350
351	ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3, retry_count |
352				   FUSB_REG_CONTROL3_AUTO_RETRY);
353
354	return ret;
355}
356
357/*
358 * initialize interrupt on the chip
359 * - unmasked interrupt: VBUS_OK
360 */
361static int fusb302_init_interrupt(struct fusb302_chip *chip)
362{
363	int ret = 0;
364
365	ret = fusb302_i2c_write(chip, FUSB_REG_MASK,
366				0xFF & ~FUSB_REG_MASK_VBUSOK);
367	if (ret < 0)
368		return ret;
369	ret = fusb302_i2c_write(chip, FUSB_REG_MASKA, 0xFF);
370	if (ret < 0)
371		return ret;
372	ret = fusb302_i2c_write(chip, FUSB_REG_MASKB, 0xFF);
373	if (ret < 0)
374		return ret;
375	ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL0,
376				     FUSB_REG_CONTROL0_INT_MASK);
377	if (ret < 0)
378		return ret;
379
380	return ret;
381}
382
383static int fusb302_set_power_mode(struct fusb302_chip *chip, u8 power_mode)
384{
385	int ret = 0;
386
387	ret = fusb302_i2c_write(chip, FUSB_REG_POWER, power_mode);
388
389	return ret;
390}
391
392static int tcpm_init(struct tcpc_dev *dev)
393{
394	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
395						 tcpc_dev);
396	int ret = 0;
397	u8 data;
398
399	ret = fusb302_sw_reset(chip);
400	if (ret < 0)
401		return ret;
402	ret = fusb302_enable_tx_auto_retries(chip, FUSB_REG_CONTROL3_N_RETRIES_3);
403	if (ret < 0)
404		return ret;
405	ret = fusb302_init_interrupt(chip);
406	if (ret < 0)
407		return ret;
408	ret = fusb302_set_power_mode(chip, FUSB_REG_POWER_PWR_ALL);
409	if (ret < 0)
410		return ret;
411	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &data);
412	if (ret < 0)
413		return ret;
414	chip->vbus_present = !!(data & FUSB_REG_STATUS0_VBUSOK);
415	ret = fusb302_i2c_read(chip, FUSB_REG_DEVICE_ID, &data);
416	if (ret < 0)
417		return ret;
418	fusb302_log(chip, "fusb302 device ID: 0x%02x", data);
419
420	return ret;
421}
422
423static int tcpm_get_vbus(struct tcpc_dev *dev)
424{
425	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
426						 tcpc_dev);
427	int ret = 0;
428
429	mutex_lock(&chip->lock);
430	ret = chip->vbus_present ? 1 : 0;
431	mutex_unlock(&chip->lock);
432
433	return ret;
434}
435
436static int tcpm_get_current_limit(struct tcpc_dev *dev)
437{
438	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
439						 tcpc_dev);
440	int current_limit = 0;
441	unsigned long timeout;
442
443	if (!chip->extcon)
444		return 0;
445
446	/*
447	 * USB2 Charger detection may still be in progress when we get here,
448	 * this can take upto 600ms, wait 800ms max.
449	 */
450	timeout = jiffies + msecs_to_jiffies(800);
451	do {
452		if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_SDP) == 1)
453			current_limit = 500;
454
455		if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_CDP) == 1 ||
456		    extcon_get_state(chip->extcon, EXTCON_CHG_USB_ACA) == 1)
457			current_limit = 1500;
458
459		if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_DCP) == 1)
460			current_limit = 2000;
461
462		msleep(50);
463	} while (current_limit == 0 && time_before(jiffies, timeout));
464
465	return current_limit;
466}
467
468static int fusb302_set_src_current(struct fusb302_chip *chip,
469				   enum src_current_status status)
470{
471	int ret = 0;
472
473	chip->src_current_status = status;
474	switch (status) {
475	case SRC_CURRENT_DEFAULT:
476		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0,
477					     FUSB_REG_CONTROL0_HOST_CUR_MASK,
478					     FUSB_REG_CONTROL0_HOST_CUR_DEF);
479		break;
480	case SRC_CURRENT_MEDIUM:
481		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0,
482					     FUSB_REG_CONTROL0_HOST_CUR_MASK,
483					     FUSB_REG_CONTROL0_HOST_CUR_MED);
484		break;
485	case SRC_CURRENT_HIGH:
486		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0,
487					     FUSB_REG_CONTROL0_HOST_CUR_MASK,
488					     FUSB_REG_CONTROL0_HOST_CUR_HIGH);
489		break;
490	default:
491		break;
492	}
493
494	return ret;
495}
496
497static int fusb302_set_toggling(struct fusb302_chip *chip,
498				enum toggling_mode mode)
499{
500	int ret = 0;
501
502	/* first disable toggling */
503	ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL2,
504				     FUSB_REG_CONTROL2_TOGGLE);
505	if (ret < 0)
506		return ret;
507	/* mask interrupts for SRC or SNK */
508	ret = fusb302_i2c_set_bits(chip, FUSB_REG_MASK,
509				   FUSB_REG_MASK_BC_LVL |
510				   FUSB_REG_MASK_COMP_CHNG);
511	if (ret < 0)
512		return ret;
513	chip->intr_bc_lvl = false;
514	chip->intr_comp_chng = false;
515	/* configure toggling mode: none/snk/src/drp */
516	switch (mode) {
517	case TOGGLING_MODE_OFF:
518		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
519					     FUSB_REG_CONTROL2_MODE_MASK,
520					     FUSB_REG_CONTROL2_MODE_NONE);
521		if (ret < 0)
522			return ret;
523		break;
524	case TOGGLING_MODE_SNK:
525		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
526					     FUSB_REG_CONTROL2_MODE_MASK,
527					     FUSB_REG_CONTROL2_MODE_UFP);
528		if (ret < 0)
529			return ret;
530		break;
531	case TOGGLING_MODE_SRC:
532		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
533					     FUSB_REG_CONTROL2_MODE_MASK,
534					     FUSB_REG_CONTROL2_MODE_DFP);
535		if (ret < 0)
536			return ret;
537		break;
538	case TOGGLING_MODE_DRP:
539		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
540					     FUSB_REG_CONTROL2_MODE_MASK,
541					     FUSB_REG_CONTROL2_MODE_DRP);
542		if (ret < 0)
543			return ret;
544		break;
545	default:
546		break;
547	}
548
549	if (mode == TOGGLING_MODE_OFF) {
550		/* mask TOGDONE interrupt */
551		ret = fusb302_i2c_set_bits(chip, FUSB_REG_MASKA,
552					   FUSB_REG_MASKA_TOGDONE);
553		if (ret < 0)
554			return ret;
555		chip->intr_togdone = false;
556	} else {
557		/* Datasheet says vconn MUST be off when toggling */
558		WARN(chip->vconn_on, "Vconn is on during toggle start");
559		/* unmask TOGDONE interrupt */
560		ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA,
561					     FUSB_REG_MASKA_TOGDONE);
562		if (ret < 0)
563			return ret;
564		chip->intr_togdone = true;
565		/* start toggling */
566		ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL2,
567					   FUSB_REG_CONTROL2_TOGGLE);
568		if (ret < 0)
569			return ret;
570		/* during toggling, consider cc as Open */
571		chip->cc1 = TYPEC_CC_OPEN;
572		chip->cc2 = TYPEC_CC_OPEN;
573	}
574	chip->toggling_mode = mode;
575
576	return ret;
577}
578
579static const char * const typec_cc_status_name[] = {
580	[TYPEC_CC_OPEN]		= "Open",
581	[TYPEC_CC_RA]		= "Ra",
582	[TYPEC_CC_RD]		= "Rd",
583	[TYPEC_CC_RP_DEF]	= "Rp-def",
584	[TYPEC_CC_RP_1_5]	= "Rp-1.5",
585	[TYPEC_CC_RP_3_0]	= "Rp-3.0",
586};
587
588static const enum src_current_status cc_src_current[] = {
589	[TYPEC_CC_OPEN]		= SRC_CURRENT_DEFAULT,
590	[TYPEC_CC_RA]		= SRC_CURRENT_DEFAULT,
591	[TYPEC_CC_RD]		= SRC_CURRENT_DEFAULT,
592	[TYPEC_CC_RP_DEF]	= SRC_CURRENT_DEFAULT,
593	[TYPEC_CC_RP_1_5]	= SRC_CURRENT_MEDIUM,
594	[TYPEC_CC_RP_3_0]	= SRC_CURRENT_HIGH,
595};
596
597static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
598{
599	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
600						 tcpc_dev);
601	u8 switches0_mask = FUSB_REG_SWITCHES0_CC1_PU_EN |
602			    FUSB_REG_SWITCHES0_CC2_PU_EN |
603			    FUSB_REG_SWITCHES0_CC1_PD_EN |
604			    FUSB_REG_SWITCHES0_CC2_PD_EN;
605	u8 rd_mda, switches0_data = 0x00;
606	int ret = 0;
607
608	mutex_lock(&chip->lock);
609	switch (cc) {
610	case TYPEC_CC_OPEN:
611		break;
612	case TYPEC_CC_RD:
613		switches0_data |= FUSB_REG_SWITCHES0_CC1_PD_EN |
614				  FUSB_REG_SWITCHES0_CC2_PD_EN;
615		break;
616	case TYPEC_CC_RP_DEF:
617	case TYPEC_CC_RP_1_5:
618	case TYPEC_CC_RP_3_0:
619		switches0_data |= (chip->cc_polarity == TYPEC_POLARITY_CC1) ?
620				  FUSB_REG_SWITCHES0_CC1_PU_EN :
621				  FUSB_REG_SWITCHES0_CC2_PU_EN;
622		break;
623	default:
624		fusb302_log(chip, "unsupported cc value %s",
625			    typec_cc_status_name[cc]);
626		ret = -EINVAL;
627		goto done;
628	}
629
630	fusb302_log(chip, "cc := %s", typec_cc_status_name[cc]);
631
632	ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF);
633	if (ret < 0) {
634		fusb302_log(chip, "cannot set toggling mode, ret=%d", ret);
635		goto done;
636	}
637
638	ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0,
639				     switches0_mask, switches0_data);
640	if (ret < 0) {
641		fusb302_log(chip, "cannot set pull-up/-down, ret = %d", ret);
642		goto done;
643	}
644	/* reset the cc status */
645	chip->cc1 = TYPEC_CC_OPEN;
646	chip->cc2 = TYPEC_CC_OPEN;
647
648	/* adjust current for SRC */
649	ret = fusb302_set_src_current(chip, cc_src_current[cc]);
650	if (ret < 0) {
651		fusb302_log(chip, "cannot set src current %s, ret=%d",
652			    typec_cc_status_name[cc], ret);
653		goto done;
654	}
655
656	/* enable/disable interrupts, BC_LVL for SNK and COMP_CHNG for SRC */
657	switch (cc) {
658	case TYPEC_CC_RP_DEF:
659	case TYPEC_CC_RP_1_5:
660	case TYPEC_CC_RP_3_0:
661		rd_mda = rd_mda_value[cc_src_current[cc]];
662		ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda);
663		if (ret < 0) {
664			fusb302_log(chip,
665				    "cannot set SRC measure value, ret=%d",
666				    ret);
667			goto done;
668		}
669		ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
670					     FUSB_REG_MASK_BC_LVL |
671					     FUSB_REG_MASK_COMP_CHNG,
672					     FUSB_REG_MASK_BC_LVL);
673		if (ret < 0) {
674			fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
675				    ret);
676			goto done;
677		}
678		chip->intr_comp_chng = true;
679		chip->intr_bc_lvl = false;
680		break;
681	case TYPEC_CC_RD:
682		ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
683					     FUSB_REG_MASK_BC_LVL |
684					     FUSB_REG_MASK_COMP_CHNG,
685					     FUSB_REG_MASK_COMP_CHNG);
686		if (ret < 0) {
687			fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
688				    ret);
689			goto done;
690		}
691		chip->intr_bc_lvl = true;
692		chip->intr_comp_chng = false;
693		break;
694	default:
695		break;
696	}
697done:
698	mutex_unlock(&chip->lock);
699
700	return ret;
701}
702
703static int tcpm_get_cc(struct tcpc_dev *dev, enum typec_cc_status *cc1,
704		       enum typec_cc_status *cc2)
705{
706	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
707						 tcpc_dev);
708
709	mutex_lock(&chip->lock);
710	*cc1 = chip->cc1;
711	*cc2 = chip->cc2;
712	fusb302_log(chip, "cc1=%s, cc2=%s", typec_cc_status_name[*cc1],
713		    typec_cc_status_name[*cc2]);
714	mutex_unlock(&chip->lock);
715
716	return 0;
717}
718
719static int tcpm_set_polarity(struct tcpc_dev *dev,
720			     enum typec_cc_polarity polarity)
721{
722	return 0;
723}
724
725static int tcpm_set_vconn(struct tcpc_dev *dev, bool on)
726{
727	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
728						 tcpc_dev);
729	int ret = 0;
730	u8 switches0_data = 0x00;
731	u8 switches0_mask = FUSB_REG_SWITCHES0_VCONN_CC1 |
732			    FUSB_REG_SWITCHES0_VCONN_CC2;
733
734	mutex_lock(&chip->lock);
735	if (chip->vconn_on == on) {
736		fusb302_log(chip, "vconn is already %s", on ? "On" : "Off");
737		goto done;
738	}
739	if (on) {
740		switches0_data = (chip->cc_polarity == TYPEC_POLARITY_CC1) ?
741				 FUSB_REG_SWITCHES0_VCONN_CC2 :
742				 FUSB_REG_SWITCHES0_VCONN_CC1;
743	}
744	ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0,
745				     switches0_mask, switches0_data);
746	if (ret < 0)
747		goto done;
748	chip->vconn_on = on;
749	fusb302_log(chip, "vconn := %s", on ? "On" : "Off");
750done:
751	mutex_unlock(&chip->lock);
752
753	return ret;
754}
755
756static int tcpm_set_vbus(struct tcpc_dev *dev, bool on, bool charge)
757{
758	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
759						 tcpc_dev);
760	int ret = 0;
761
762	mutex_lock(&chip->lock);
763	if (chip->vbus_on == on) {
764		fusb302_log(chip, "vbus is already %s", on ? "On" : "Off");
765	} else {
766		if (on)
767			ret = regulator_enable(chip->vbus);
768		else
769			ret = regulator_disable(chip->vbus);
770		if (ret < 0) {
771			fusb302_log(chip, "cannot %s vbus regulator, ret=%d",
772				    on ? "enable" : "disable", ret);
773			goto done;
774		}
775		chip->vbus_on = on;
776		fusb302_log(chip, "vbus := %s", on ? "On" : "Off");
777	}
778	if (chip->charge_on == charge)
779		fusb302_log(chip, "charge is already %s",
780			    charge ? "On" : "Off");
781	else
782		chip->charge_on = charge;
783
784done:
785	mutex_unlock(&chip->lock);
786
787	return ret;
788}
789
790static int fusb302_pd_tx_flush(struct fusb302_chip *chip)
791{
792	return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL0,
793				    FUSB_REG_CONTROL0_TX_FLUSH);
794}
795
796static int fusb302_pd_rx_flush(struct fusb302_chip *chip)
797{
798	return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL1,
799				    FUSB_REG_CONTROL1_RX_FLUSH);
800}
801
802static int fusb302_pd_set_auto_goodcrc(struct fusb302_chip *chip, bool on)
803{
804	if (on)
805		return fusb302_i2c_set_bits(chip, FUSB_REG_SWITCHES1,
806					    FUSB_REG_SWITCHES1_AUTO_GCRC);
807	return fusb302_i2c_clear_bits(chip, FUSB_REG_SWITCHES1,
808					    FUSB_REG_SWITCHES1_AUTO_GCRC);
809}
810
811static int fusb302_pd_set_interrupts(struct fusb302_chip *chip, bool on)
812{
813	int ret = 0;
814	u8 mask_interrupts = FUSB_REG_MASK_COLLISION;
815	u8 maska_interrupts = FUSB_REG_MASKA_RETRYFAIL |
816			      FUSB_REG_MASKA_HARDSENT |
817			      FUSB_REG_MASKA_TX_SUCCESS |
818			      FUSB_REG_MASKA_HARDRESET;
819	u8 maskb_interrupts = FUSB_REG_MASKB_GCRCSENT;
820
821	ret = on ?
822		fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, mask_interrupts) :
823		fusb302_i2c_set_bits(chip, FUSB_REG_MASK, mask_interrupts);
824	if (ret < 0)
825		return ret;
826	ret = on ?
827		fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA, maska_interrupts) :
828		fusb302_i2c_set_bits(chip, FUSB_REG_MASKA, maska_interrupts);
829	if (ret < 0)
830		return ret;
831	ret = on ?
832		fusb302_i2c_clear_bits(chip, FUSB_REG_MASKB, maskb_interrupts) :
833		fusb302_i2c_set_bits(chip, FUSB_REG_MASKB, maskb_interrupts);
834	return ret;
835}
836
837static int tcpm_set_pd_rx(struct tcpc_dev *dev, bool on)
838{
839	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
840						 tcpc_dev);
841	int ret = 0;
842
843	mutex_lock(&chip->lock);
844	ret = fusb302_pd_rx_flush(chip);
845	if (ret < 0) {
846		fusb302_log(chip, "cannot flush pd rx buffer, ret=%d", ret);
847		goto done;
848	}
849	ret = fusb302_pd_tx_flush(chip);
850	if (ret < 0) {
851		fusb302_log(chip, "cannot flush pd tx buffer, ret=%d", ret);
852		goto done;
853	}
854	ret = fusb302_pd_set_auto_goodcrc(chip, on);
855	if (ret < 0) {
856		fusb302_log(chip, "cannot turn %s auto GCRC, ret=%d",
857			    on ? "on" : "off", ret);
858		goto done;
859	}
860	ret = fusb302_pd_set_interrupts(chip, on);
861	if (ret < 0) {
862		fusb302_log(chip, "cannot turn %s pd interrupts, ret=%d",
863			    on ? "on" : "off", ret);
864		goto done;
865	}
866	fusb302_log(chip, "pd := %s", on ? "on" : "off");
867done:
868	mutex_unlock(&chip->lock);
869
870	return ret;
871}
872
873static const char * const typec_role_name[] = {
874	[TYPEC_SINK]		= "Sink",
875	[TYPEC_SOURCE]		= "Source",
876};
877
878static const char * const typec_data_role_name[] = {
879	[TYPEC_DEVICE]		= "Device",
880	[TYPEC_HOST]		= "Host",
881};
882
883static int tcpm_set_roles(struct tcpc_dev *dev, bool attached,
884			  enum typec_role pwr, enum typec_data_role data)
885{
886	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
887						 tcpc_dev);
888	int ret = 0;
889	u8 switches1_mask = FUSB_REG_SWITCHES1_POWERROLE |
890			    FUSB_REG_SWITCHES1_DATAROLE;
891	u8 switches1_data = 0x00;
892
893	mutex_lock(&chip->lock);
894	if (pwr == TYPEC_SOURCE)
895		switches1_data |= FUSB_REG_SWITCHES1_POWERROLE;
896	if (data == TYPEC_HOST)
897		switches1_data |= FUSB_REG_SWITCHES1_DATAROLE;
898	ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES1,
899				     switches1_mask, switches1_data);
900	if (ret < 0) {
901		fusb302_log(chip, "unable to set pd header %s, %s, ret=%d",
902			    typec_role_name[pwr], typec_data_role_name[data],
903			    ret);
904		goto done;
905	}
906	fusb302_log(chip, "pd header := %s, %s", typec_role_name[pwr],
907		    typec_data_role_name[data]);
908done:
909	mutex_unlock(&chip->lock);
910
911	return ret;
912}
913
914static int tcpm_start_toggling(struct tcpc_dev *dev,
915			       enum typec_port_type port_type,
916			       enum typec_cc_status cc)
917{
918	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
919						 tcpc_dev);
920	enum toggling_mode mode = TOGGLING_MODE_OFF;
921	int ret = 0;
922
923	switch (port_type) {
924	case TYPEC_PORT_SRC:
925		mode = TOGGLING_MODE_SRC;
926		break;
927	case TYPEC_PORT_SNK:
928		mode = TOGGLING_MODE_SNK;
929		break;
930	case TYPEC_PORT_DRP:
931		mode = TOGGLING_MODE_DRP;
932		break;
933	}
934
935	mutex_lock(&chip->lock);
936	ret = fusb302_set_src_current(chip, cc_src_current[cc]);
937	if (ret < 0) {
938		fusb302_log(chip, "unable to set src current %s, ret=%d",
939			    typec_cc_status_name[cc], ret);
940		goto done;
941	}
942	ret = fusb302_set_toggling(chip, mode);
943	if (ret < 0) {
944		fusb302_log(chip,
945			    "unable to start drp toggling, ret=%d", ret);
946		goto done;
947	}
948	fusb302_log(chip, "start drp toggling");
949done:
950	mutex_unlock(&chip->lock);
951
952	return ret;
953}
954
955static int fusb302_pd_send_message(struct fusb302_chip *chip,
956				   const struct pd_message *msg)
957{
958	int ret = 0;
959	u8 buf[40];
960	u8 pos = 0;
961	int len;
962
963	/* SOP tokens */
964	buf[pos++] = FUSB302_TKN_SYNC1;
965	buf[pos++] = FUSB302_TKN_SYNC1;
966	buf[pos++] = FUSB302_TKN_SYNC1;
967	buf[pos++] = FUSB302_TKN_SYNC2;
968
969	len = pd_header_cnt_le(msg->header) * 4;
970	/* plug 2 for header */
971	len += 2;
972	if (len > 0x1F) {
973		fusb302_log(chip,
974			    "PD message too long %d (incl. header)", len);
975		return -EINVAL;
976	}
977	/* packsym tells the FUSB302 chip that the next X bytes are payload */
978	buf[pos++] = FUSB302_TKN_PACKSYM | (len & 0x1F);
979	memcpy(&buf[pos], &msg->header, sizeof(msg->header));
980	pos += sizeof(msg->header);
981
982	len -= 2;
983	memcpy(&buf[pos], msg->payload, len);
984	pos += len;
985
986	/* CRC */
987	buf[pos++] = FUSB302_TKN_JAMCRC;
988	/* EOP */
989	buf[pos++] = FUSB302_TKN_EOP;
990	/* turn tx off after sending message */
991	buf[pos++] = FUSB302_TKN_TXOFF;
992	/* start transmission */
993	buf[pos++] = FUSB302_TKN_TXON;
994
995	ret = fusb302_i2c_block_write(chip, FUSB_REG_FIFOS, pos, buf);
996	if (ret < 0)
997		return ret;
998	fusb302_log(chip, "sending PD message header: %x", msg->header);
999	fusb302_log(chip, "sending PD message len: %d", len);
1000
1001	return ret;
1002}
1003
1004static int fusb302_pd_send_hardreset(struct fusb302_chip *chip)
1005{
1006	return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3,
1007				    FUSB_REG_CONTROL3_SEND_HARDRESET);
1008}
1009
1010static const char * const transmit_type_name[] = {
1011	[TCPC_TX_SOP]			= "SOP",
1012	[TCPC_TX_SOP_PRIME]		= "SOP'",
1013	[TCPC_TX_SOP_PRIME_PRIME]	= "SOP''",
1014	[TCPC_TX_SOP_DEBUG_PRIME]	= "DEBUG'",
1015	[TCPC_TX_SOP_DEBUG_PRIME_PRIME]	= "DEBUG''",
1016	[TCPC_TX_HARD_RESET]		= "HARD_RESET",
1017	[TCPC_TX_CABLE_RESET]		= "CABLE_RESET",
1018	[TCPC_TX_BIST_MODE_2]		= "BIST_MODE_2",
1019};
1020
1021static int tcpm_pd_transmit(struct tcpc_dev *dev, enum tcpm_transmit_type type,
1022			    const struct pd_message *msg, unsigned int negotiated_rev)
1023{
1024	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
1025						 tcpc_dev);
1026	int ret = 0;
1027
1028	mutex_lock(&chip->lock);
1029	switch (type) {
1030	case TCPC_TX_SOP:
1031		/* nRetryCount 3 in P2.0 spec, whereas 2 in PD3.0 spec */
1032		ret = fusb302_enable_tx_auto_retries(chip, negotiated_rev > PD_REV20 ?
1033						     FUSB_REG_CONTROL3_N_RETRIES_2 :
1034						     FUSB_REG_CONTROL3_N_RETRIES_3);
1035		if (ret < 0)
1036			fusb302_log(chip, "Cannot update retry count ret=%d", ret);
1037
1038		ret = fusb302_pd_send_message(chip, msg);
1039		if (ret < 0)
1040			fusb302_log(chip,
1041				    "cannot send PD message, ret=%d", ret);
1042		break;
1043	case TCPC_TX_HARD_RESET:
1044		ret = fusb302_pd_send_hardreset(chip);
1045		if (ret < 0)
1046			fusb302_log(chip,
1047				    "cannot send hardreset, ret=%d", ret);
1048		break;
1049	default:
1050		fusb302_log(chip, "type %s not supported",
1051			    transmit_type_name[type]);
1052		ret = -EINVAL;
1053	}
1054	mutex_unlock(&chip->lock);
1055
1056	return ret;
1057}
1058
1059static enum typec_cc_status fusb302_bc_lvl_to_cc(u8 bc_lvl)
1060{
1061	if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_1230_MAX)
1062		return TYPEC_CC_RP_3_0;
1063	if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_600_1230)
1064		return TYPEC_CC_RP_1_5;
1065	if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_200_600)
1066		return TYPEC_CC_RP_DEF;
1067	return TYPEC_CC_OPEN;
1068}
1069
1070static void fusb302_bc_lvl_handler_work(struct work_struct *work)
1071{
1072	struct fusb302_chip *chip = container_of(work, struct fusb302_chip,
1073						 bc_lvl_handler.work);
1074	int ret = 0;
1075	u8 status0;
1076	u8 bc_lvl;
1077	enum typec_cc_status cc_status;
1078
1079	mutex_lock(&chip->lock);
1080	if (!chip->intr_bc_lvl) {
1081		fusb302_log(chip, "BC_LVL interrupt is turned off, abort");
1082		goto done;
1083	}
1084	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1085	if (ret < 0)
1086		goto done;
1087	fusb302_log(chip, "BC_LVL handler, status0=0x%02x", status0);
1088	if (status0 & FUSB_REG_STATUS0_ACTIVITY) {
1089		fusb302_log(chip, "CC activities detected, delay handling");
1090		mod_delayed_work(chip->wq, &chip->bc_lvl_handler,
1091				 msecs_to_jiffies(T_BC_LVL_DEBOUNCE_DELAY_MS));
1092		goto done;
1093	}
1094	bc_lvl = status0 & FUSB_REG_STATUS0_BC_LVL_MASK;
1095	cc_status = fusb302_bc_lvl_to_cc(bc_lvl);
1096	if (chip->cc_polarity == TYPEC_POLARITY_CC1) {
1097		if (chip->cc1 != cc_status) {
1098			fusb302_log(chip, "cc1: %s -> %s",
1099				    typec_cc_status_name[chip->cc1],
1100				    typec_cc_status_name[cc_status]);
1101			chip->cc1 = cc_status;
1102			tcpm_cc_change(chip->tcpm_port);
1103		}
1104	} else {
1105		if (chip->cc2 != cc_status) {
1106			fusb302_log(chip, "cc2: %s -> %s",
1107				    typec_cc_status_name[chip->cc2],
1108				    typec_cc_status_name[cc_status]);
1109			chip->cc2 = cc_status;
1110			tcpm_cc_change(chip->tcpm_port);
1111		}
1112	}
1113
1114done:
1115	mutex_unlock(&chip->lock);
1116}
1117
1118static void init_tcpc_dev(struct tcpc_dev *fusb302_tcpc_dev)
1119{
1120	fusb302_tcpc_dev->init = tcpm_init;
1121	fusb302_tcpc_dev->get_vbus = tcpm_get_vbus;
1122	fusb302_tcpc_dev->get_current_limit = tcpm_get_current_limit;
1123	fusb302_tcpc_dev->set_cc = tcpm_set_cc;
1124	fusb302_tcpc_dev->get_cc = tcpm_get_cc;
1125	fusb302_tcpc_dev->set_polarity = tcpm_set_polarity;
1126	fusb302_tcpc_dev->set_vconn = tcpm_set_vconn;
1127	fusb302_tcpc_dev->set_vbus = tcpm_set_vbus;
1128	fusb302_tcpc_dev->set_pd_rx = tcpm_set_pd_rx;
1129	fusb302_tcpc_dev->set_roles = tcpm_set_roles;
1130	fusb302_tcpc_dev->start_toggling = tcpm_start_toggling;
1131	fusb302_tcpc_dev->pd_transmit = tcpm_pd_transmit;
1132}
1133
1134static const char * const cc_polarity_name[] = {
1135	[TYPEC_POLARITY_CC1]	= "Polarity_CC1",
1136	[TYPEC_POLARITY_CC2]	= "Polarity_CC2",
1137};
1138
1139static int fusb302_set_cc_polarity_and_pull(struct fusb302_chip *chip,
1140					    enum typec_cc_polarity cc_polarity,
1141					    bool pull_up, bool pull_down)
1142{
1143	int ret = 0;
1144	u8 switches0_data = 0x00;
1145	u8 switches1_mask = FUSB_REG_SWITCHES1_TXCC1_EN |
1146			    FUSB_REG_SWITCHES1_TXCC2_EN;
1147	u8 switches1_data = 0x00;
1148
1149	if (pull_down)
1150		switches0_data |= FUSB_REG_SWITCHES0_CC1_PD_EN |
1151				  FUSB_REG_SWITCHES0_CC2_PD_EN;
1152
1153	if (cc_polarity == TYPEC_POLARITY_CC1) {
1154		switches0_data |= FUSB_REG_SWITCHES0_MEAS_CC1;
1155		if (chip->vconn_on)
1156			switches0_data |= FUSB_REG_SWITCHES0_VCONN_CC2;
1157		if (pull_up)
1158			switches0_data |= FUSB_REG_SWITCHES0_CC1_PU_EN;
1159		switches1_data = FUSB_REG_SWITCHES1_TXCC1_EN;
1160	} else {
1161		switches0_data |= FUSB_REG_SWITCHES0_MEAS_CC2;
1162		if (chip->vconn_on)
1163			switches0_data |= FUSB_REG_SWITCHES0_VCONN_CC1;
1164		if (pull_up)
1165			switches0_data |= FUSB_REG_SWITCHES0_CC2_PU_EN;
1166		switches1_data = FUSB_REG_SWITCHES1_TXCC2_EN;
1167	}
1168	ret = fusb302_i2c_write(chip, FUSB_REG_SWITCHES0, switches0_data);
1169	if (ret < 0)
1170		return ret;
1171	ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES1,
1172				     switches1_mask, switches1_data);
1173	if (ret < 0)
1174		return ret;
1175	chip->cc_polarity = cc_polarity;
1176
1177	return ret;
1178}
1179
1180static int fusb302_handle_togdone_snk(struct fusb302_chip *chip,
1181				      u8 togdone_result)
1182{
1183	int ret = 0;
1184	u8 status0;
1185	u8 bc_lvl;
1186	enum typec_cc_polarity cc_polarity;
1187	enum typec_cc_status cc_status_active, cc1, cc2;
1188
1189	/* set polarity and pull_up, pull_down */
1190	cc_polarity = (togdone_result == FUSB_REG_STATUS1A_TOGSS_SNK1) ?
1191		      TYPEC_POLARITY_CC1 : TYPEC_POLARITY_CC2;
1192	ret = fusb302_set_cc_polarity_and_pull(chip, cc_polarity, false, true);
1193	if (ret < 0) {
1194		fusb302_log(chip, "cannot set cc polarity %s, ret=%d",
1195			    cc_polarity_name[cc_polarity], ret);
1196		return ret;
1197	}
1198	/* fusb302_set_cc_polarity() has set the correct measure block */
1199	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1200	if (ret < 0)
1201		return ret;
1202	bc_lvl = status0 & FUSB_REG_STATUS0_BC_LVL_MASK;
1203	cc_status_active = fusb302_bc_lvl_to_cc(bc_lvl);
1204	/* restart toggling if the cc status on the active line is OPEN */
1205	if (cc_status_active == TYPEC_CC_OPEN) {
1206		fusb302_log(chip, "restart toggling as CC_OPEN detected");
1207		ret = fusb302_set_toggling(chip, chip->toggling_mode);
1208		return ret;
1209	}
1210	/* update tcpm with the new cc value */
1211	cc1 = (cc_polarity == TYPEC_POLARITY_CC1) ?
1212	      cc_status_active : TYPEC_CC_OPEN;
1213	cc2 = (cc_polarity == TYPEC_POLARITY_CC2) ?
1214	      cc_status_active : TYPEC_CC_OPEN;
1215	if ((chip->cc1 != cc1) || (chip->cc2 != cc2)) {
1216		chip->cc1 = cc1;
1217		chip->cc2 = cc2;
1218		tcpm_cc_change(chip->tcpm_port);
1219	}
1220	/* turn off toggling */
1221	ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF);
1222	if (ret < 0) {
1223		fusb302_log(chip,
1224			    "cannot set toggling mode off, ret=%d", ret);
1225		return ret;
1226	}
1227	/* unmask bc_lvl interrupt */
1228	ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, FUSB_REG_MASK_BC_LVL);
1229	if (ret < 0) {
1230		fusb302_log(chip,
1231			    "cannot unmask bc_lcl interrupt, ret=%d", ret);
1232		return ret;
1233	}
1234	chip->intr_bc_lvl = true;
1235	fusb302_log(chip, "detected cc1=%s, cc2=%s",
1236		    typec_cc_status_name[cc1],
1237		    typec_cc_status_name[cc2]);
1238
1239	return ret;
1240}
1241
1242/* On error returns < 0, otherwise a typec_cc_status value */
1243static int fusb302_get_src_cc_status(struct fusb302_chip *chip,
1244				     enum typec_cc_polarity cc_polarity,
1245				     enum typec_cc_status *cc)
1246{
1247	u8 ra_mda = ra_mda_value[chip->src_current_status];
1248	u8 rd_mda = rd_mda_value[chip->src_current_status];
1249	u8 switches0_data, status0;
1250	int ret;
1251
1252	/* Step 1: Set switches so that we measure the right CC pin */
1253	switches0_data = (cc_polarity == TYPEC_POLARITY_CC1) ?
1254		FUSB_REG_SWITCHES0_CC1_PU_EN | FUSB_REG_SWITCHES0_MEAS_CC1 :
1255		FUSB_REG_SWITCHES0_CC2_PU_EN | FUSB_REG_SWITCHES0_MEAS_CC2;
1256	ret = fusb302_i2c_write(chip, FUSB_REG_SWITCHES0, switches0_data);
1257	if (ret < 0)
1258		return ret;
1259
1260	fusb302_i2c_read(chip, FUSB_REG_SWITCHES0, &status0);
1261	fusb302_log(chip, "get_src_cc_status switches: 0x%0x", status0);
1262
1263	/* Step 2: Set compararator volt to differentiate between Open and Rd */
1264	ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda);
1265	if (ret < 0)
1266		return ret;
1267
1268	usleep_range(50, 100);
1269	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1270	if (ret < 0)
1271		return ret;
1272
1273	fusb302_log(chip, "get_src_cc_status rd_mda status0: 0x%0x", status0);
1274	if (status0 & FUSB_REG_STATUS0_COMP) {
1275		*cc = TYPEC_CC_OPEN;
1276		return 0;
1277	}
1278
1279	/* Step 3: Set compararator input to differentiate between Rd and Ra. */
1280	ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, ra_mda);
1281	if (ret < 0)
1282		return ret;
1283
1284	usleep_range(50, 100);
1285	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1286	if (ret < 0)
1287		return ret;
1288
1289	fusb302_log(chip, "get_src_cc_status ra_mda status0: 0x%0x", status0);
1290	if (status0 & FUSB_REG_STATUS0_COMP)
1291		*cc = TYPEC_CC_RD;
1292	else
1293		*cc = TYPEC_CC_RA;
1294
1295	return 0;
1296}
1297
1298static int fusb302_handle_togdone_src(struct fusb302_chip *chip,
1299				      u8 togdone_result)
1300{
1301	/*
1302	 * - set polarity (measure cc, vconn, tx)
1303	 * - set pull_up, pull_down
1304	 * - set cc1, cc2, and update to tcpm_port
1305	 * - set I_COMP interrupt on
1306	 */
1307	int ret = 0;
1308	u8 rd_mda = rd_mda_value[chip->src_current_status];
1309	enum toggling_mode toggling_mode = chip->toggling_mode;
1310	enum typec_cc_polarity cc_polarity;
1311	enum typec_cc_status cc1, cc2;
1312
1313	/*
1314	 * The toggle-engine will stop in a src state if it sees either Ra or
1315	 * Rd. Determine the status for both CC pins, starting with the one
1316	 * where toggling stopped, as that is where the switches point now.
1317	 */
1318	if (togdone_result == FUSB_REG_STATUS1A_TOGSS_SRC1)
1319		ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC1, &cc1);
1320	else
1321		ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC2, &cc2);
1322	if (ret < 0)
1323		return ret;
1324	/* we must turn off toggling before we can measure the other pin */
1325	ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF);
1326	if (ret < 0) {
1327		fusb302_log(chip, "cannot set toggling mode off, ret=%d", ret);
1328		return ret;
1329	}
1330	/* get the status of the other pin */
1331	if (togdone_result == FUSB_REG_STATUS1A_TOGSS_SRC1)
1332		ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC2, &cc2);
1333	else
1334		ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC1, &cc1);
1335	if (ret < 0)
1336		return ret;
1337
1338	/* determine polarity based on the status of both pins */
1339	if (cc1 == TYPEC_CC_RD &&
1340			(cc2 == TYPEC_CC_OPEN || cc2 == TYPEC_CC_RA)) {
1341		cc_polarity = TYPEC_POLARITY_CC1;
1342	} else if (cc2 == TYPEC_CC_RD &&
1343		    (cc1 == TYPEC_CC_OPEN || cc1 == TYPEC_CC_RA)) {
1344		cc_polarity = TYPEC_POLARITY_CC2;
1345	} else {
1346		fusb302_log(chip, "unexpected CC status cc1=%s, cc2=%s, restarting toggling",
1347			    typec_cc_status_name[cc1],
1348			    typec_cc_status_name[cc2]);
1349		return fusb302_set_toggling(chip, toggling_mode);
1350	}
1351	/* set polarity and pull_up, pull_down */
1352	ret = fusb302_set_cc_polarity_and_pull(chip, cc_polarity, true, false);
1353	if (ret < 0) {
1354		fusb302_log(chip, "cannot set cc polarity %s, ret=%d",
1355			    cc_polarity_name[cc_polarity], ret);
1356		return ret;
1357	}
1358	/* update tcpm with the new cc value */
1359	if ((chip->cc1 != cc1) || (chip->cc2 != cc2)) {
1360		chip->cc1 = cc1;
1361		chip->cc2 = cc2;
1362		tcpm_cc_change(chip->tcpm_port);
1363	}
1364	/* set MDAC to Rd threshold, and unmask I_COMP for unplug detection */
1365	ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda);
1366	if (ret < 0)
1367		return ret;
1368	/* unmask comp_chng interrupt */
1369	ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASK,
1370				     FUSB_REG_MASK_COMP_CHNG);
1371	if (ret < 0) {
1372		fusb302_log(chip,
1373			    "cannot unmask comp_chng interrupt, ret=%d", ret);
1374		return ret;
1375	}
1376	chip->intr_comp_chng = true;
1377	fusb302_log(chip, "detected cc1=%s, cc2=%s",
1378		    typec_cc_status_name[cc1],
1379		    typec_cc_status_name[cc2]);
1380
1381	return ret;
1382}
1383
1384static int fusb302_handle_togdone(struct fusb302_chip *chip)
1385{
1386	int ret = 0;
1387	u8 status1a;
1388	u8 togdone_result;
1389
1390	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS1A, &status1a);
1391	if (ret < 0)
1392		return ret;
1393	togdone_result = (status1a >> FUSB_REG_STATUS1A_TOGSS_POS) &
1394			 FUSB_REG_STATUS1A_TOGSS_MASK;
1395	switch (togdone_result) {
1396	case FUSB_REG_STATUS1A_TOGSS_SNK1:
1397	case FUSB_REG_STATUS1A_TOGSS_SNK2:
1398		return fusb302_handle_togdone_snk(chip, togdone_result);
1399	case FUSB_REG_STATUS1A_TOGSS_SRC1:
1400	case FUSB_REG_STATUS1A_TOGSS_SRC2:
1401		return fusb302_handle_togdone_src(chip, togdone_result);
1402	case FUSB_REG_STATUS1A_TOGSS_AA:
1403		/* doesn't support */
1404		fusb302_log(chip, "AudioAccessory not supported");
1405		fusb302_set_toggling(chip, chip->toggling_mode);
1406		break;
1407	default:
1408		fusb302_log(chip, "TOGDONE with an invalid state: %d",
1409			    togdone_result);
1410		fusb302_set_toggling(chip, chip->toggling_mode);
1411		break;
1412	}
1413	return ret;
1414}
1415
1416static int fusb302_pd_reset(struct fusb302_chip *chip)
1417{
1418	return fusb302_i2c_set_bits(chip, FUSB_REG_RESET,
1419				    FUSB_REG_RESET_PD_RESET);
1420}
1421
1422static int fusb302_pd_read_message(struct fusb302_chip *chip,
1423				   struct pd_message *msg)
1424{
1425	int ret = 0;
1426	u8 token;
1427	u8 crc[4];
1428	int len;
1429
1430	/* first SOP token */
1431	ret = fusb302_i2c_read(chip, FUSB_REG_FIFOS, &token);
1432	if (ret < 0)
1433		return ret;
1434	ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, 2,
1435				     (u8 *)&msg->header);
1436	if (ret < 0)
1437		return ret;
1438	len = pd_header_cnt_le(msg->header) * 4;
1439	/* add 4 to length to include the CRC */
1440	if (len > PD_MAX_PAYLOAD * 4) {
1441		fusb302_log(chip, "PD message too long %d", len);
1442		return -EINVAL;
1443	}
1444	if (len > 0) {
1445		ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, len,
1446					     (u8 *)msg->payload);
1447		if (ret < 0)
1448			return ret;
1449	}
1450	/* another 4 bytes to read CRC out */
1451	ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, 4, crc);
1452	if (ret < 0)
1453		return ret;
1454	fusb302_log(chip, "PD message header: %x", msg->header);
1455	fusb302_log(chip, "PD message len: %d", len);
1456
1457	/*
1458	 * Check if we've read off a GoodCRC message. If so then indicate to
1459	 * TCPM that the previous transmission has completed. Otherwise we pass
1460	 * the received message over to TCPM for processing.
1461	 *
1462	 * We make this check here instead of basing the reporting decision on
1463	 * the IRQ event type, as it's possible for the chip to report the
1464	 * TX_SUCCESS and GCRCSENT events out of order on occasion, so we need
1465	 * to check the message type to ensure correct reporting to TCPM.
1466	 */
1467	if ((!len) && (pd_header_type_le(msg->header) == PD_CTRL_GOOD_CRC))
1468		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS);
1469	else
1470		tcpm_pd_receive(chip->tcpm_port, msg, TCPC_TX_SOP);
1471
1472	return ret;
1473}
1474
1475static irqreturn_t fusb302_irq_intn(int irq, void *dev_id)
1476{
1477	struct fusb302_chip *chip = dev_id;
1478	unsigned long flags;
1479
1480	/* Disable our level triggered IRQ until our irq_work has cleared it */
1481	disable_irq_nosync(chip->gpio_int_n_irq);
1482
1483	spin_lock_irqsave(&chip->irq_lock, flags);
1484	if (chip->irq_suspended)
1485		chip->irq_while_suspended = true;
1486	else
1487		schedule_work(&chip->irq_work);
1488	spin_unlock_irqrestore(&chip->irq_lock, flags);
1489
1490	return IRQ_HANDLED;
1491}
1492
1493static void fusb302_irq_work(struct work_struct *work)
1494{
1495	struct fusb302_chip *chip = container_of(work, struct fusb302_chip,
1496						 irq_work);
1497	int ret = 0;
1498	u8 interrupt;
1499	u8 interrupta;
1500	u8 interruptb;
1501	u8 status0;
1502	bool vbus_present;
1503	bool comp_result;
1504	bool intr_togdone;
1505	bool intr_bc_lvl;
1506	bool intr_comp_chng;
1507	struct pd_message pd_msg;
1508
1509	mutex_lock(&chip->lock);
1510	/* grab a snapshot of intr flags */
1511	intr_togdone = chip->intr_togdone;
1512	intr_bc_lvl = chip->intr_bc_lvl;
1513	intr_comp_chng = chip->intr_comp_chng;
1514
1515	ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPT, &interrupt);
1516	if (ret < 0)
1517		goto done;
1518	ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPTA, &interrupta);
1519	if (ret < 0)
1520		goto done;
1521	ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPTB, &interruptb);
1522	if (ret < 0)
1523		goto done;
1524	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1525	if (ret < 0)
1526		goto done;
1527	fusb302_log(chip,
1528		    "IRQ: 0x%02x, a: 0x%02x, b: 0x%02x, status0: 0x%02x",
1529		    interrupt, interrupta, interruptb, status0);
1530
1531	if (interrupt & FUSB_REG_INTERRUPT_VBUSOK) {
1532		vbus_present = !!(status0 & FUSB_REG_STATUS0_VBUSOK);
1533		fusb302_log(chip, "IRQ: VBUS_OK, vbus=%s",
1534			    vbus_present ? "On" : "Off");
1535		if (vbus_present != chip->vbus_present) {
1536			chip->vbus_present = vbus_present;
1537			tcpm_vbus_change(chip->tcpm_port);
1538		}
1539	}
1540
1541	if ((interrupta & FUSB_REG_INTERRUPTA_TOGDONE) && intr_togdone) {
1542		fusb302_log(chip, "IRQ: TOGDONE");
1543		ret = fusb302_handle_togdone(chip);
1544		if (ret < 0) {
1545			fusb302_log(chip,
1546				    "handle togdone error, ret=%d", ret);
1547			goto done;
1548		}
1549	}
1550
1551	if ((interrupt & FUSB_REG_INTERRUPT_BC_LVL) && intr_bc_lvl) {
1552		fusb302_log(chip, "IRQ: BC_LVL, handler pending");
1553		/*
1554		 * as BC_LVL interrupt can be affected by PD activity,
1555		 * apply delay to for the handler to wait for the PD
1556		 * signaling to finish.
1557		 */
1558		mod_delayed_work(chip->wq, &chip->bc_lvl_handler,
1559				 msecs_to_jiffies(T_BC_LVL_DEBOUNCE_DELAY_MS));
1560	}
1561
1562	if ((interrupt & FUSB_REG_INTERRUPT_COMP_CHNG) && intr_comp_chng) {
1563		comp_result = !!(status0 & FUSB_REG_STATUS0_COMP);
1564		fusb302_log(chip, "IRQ: COMP_CHNG, comp=%s",
1565			    comp_result ? "true" : "false");
1566		if (comp_result) {
1567			/* cc level > Rd_threshold, detach */
1568			chip->cc1 = TYPEC_CC_OPEN;
1569			chip->cc2 = TYPEC_CC_OPEN;
1570			tcpm_cc_change(chip->tcpm_port);
1571		}
1572	}
1573
1574	if (interrupt & FUSB_REG_INTERRUPT_COLLISION) {
1575		fusb302_log(chip, "IRQ: PD collision");
1576		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_FAILED);
1577	}
1578
1579	if (interrupta & FUSB_REG_INTERRUPTA_RETRYFAIL) {
1580		fusb302_log(chip, "IRQ: PD retry failed");
1581		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_FAILED);
1582	}
1583
1584	if (interrupta & FUSB_REG_INTERRUPTA_HARDSENT) {
1585		fusb302_log(chip, "IRQ: PD hardreset sent");
1586		ret = fusb302_pd_reset(chip);
1587		if (ret < 0) {
1588			fusb302_log(chip, "cannot PD reset, ret=%d", ret);
1589			goto done;
1590		}
1591		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS);
1592	}
1593
1594	if (interrupta & FUSB_REG_INTERRUPTA_TX_SUCCESS) {
1595		fusb302_log(chip, "IRQ: PD tx success");
1596		ret = fusb302_pd_read_message(chip, &pd_msg);
1597		if (ret < 0) {
1598			fusb302_log(chip,
1599				    "cannot read in PD message, ret=%d", ret);
1600			goto done;
1601		}
1602	}
1603
1604	if (interrupta & FUSB_REG_INTERRUPTA_HARDRESET) {
1605		fusb302_log(chip, "IRQ: PD received hardreset");
1606		ret = fusb302_pd_reset(chip);
1607		if (ret < 0) {
1608			fusb302_log(chip, "cannot PD reset, ret=%d", ret);
1609			goto done;
1610		}
1611		tcpm_pd_hard_reset(chip->tcpm_port);
1612	}
1613
1614	if (interruptb & FUSB_REG_INTERRUPTB_GCRCSENT) {
1615		fusb302_log(chip, "IRQ: PD sent good CRC");
1616		ret = fusb302_pd_read_message(chip, &pd_msg);
1617		if (ret < 0) {
1618			fusb302_log(chip,
1619				    "cannot read in PD message, ret=%d", ret);
1620			goto done;
1621		}
1622	}
1623done:
1624	mutex_unlock(&chip->lock);
1625	enable_irq(chip->gpio_int_n_irq);
1626}
1627
1628static int init_gpio(struct fusb302_chip *chip)
1629{
1630	struct device *dev = chip->dev;
1631	int ret = 0;
1632
1633	chip->gpio_int_n = devm_gpiod_get(dev, "fcs,int_n", GPIOD_IN);
1634	if (IS_ERR(chip->gpio_int_n)) {
1635		dev_err(dev, "failed to request gpio_int_n\n");
1636		return PTR_ERR(chip->gpio_int_n);
1637	}
1638	ret = gpiod_to_irq(chip->gpio_int_n);
1639	if (ret < 0) {
1640		dev_err(dev,
1641			"cannot request IRQ for GPIO Int_N, ret=%d", ret);
1642		return ret;
1643	}
1644	chip->gpio_int_n_irq = ret;
1645	return 0;
1646}
1647
1648#define PDO_FIXED_FLAGS \
1649	(PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)
1650
1651static const u32 src_pdo[] = {
1652	PDO_FIXED(5000, 400, PDO_FIXED_FLAGS)
1653};
1654
1655static const u32 snk_pdo[] = {
1656	PDO_FIXED(5000, 400, PDO_FIXED_FLAGS)
1657};
1658
1659static const struct property_entry port_props[] = {
1660	PROPERTY_ENTRY_STRING("data-role", "dual"),
1661	PROPERTY_ENTRY_STRING("power-role", "dual"),
1662	PROPERTY_ENTRY_STRING("try-power-role", "sink"),
1663	PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo),
1664	PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo),
1665	PROPERTY_ENTRY_U32("op-sink-microwatt", 2500000),
1666	{ }
1667};
1668
1669static struct fwnode_handle *fusb302_fwnode_get(struct device *dev)
1670{
1671	struct fwnode_handle *fwnode;
1672
1673	fwnode = device_get_named_child_node(dev, "connector");
1674	if (!fwnode)
1675		fwnode = fwnode_create_software_node(port_props, NULL);
1676
1677	return fwnode;
1678}
1679
1680static int fusb302_probe(struct i2c_client *client)
1681{
1682	struct fusb302_chip *chip;
1683	struct i2c_adapter *adapter = client->adapter;
1684	struct device *dev = &client->dev;
1685	const char *name;
1686	int ret = 0;
1687
1688	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
1689		dev_err(&client->dev,
1690			"I2C/SMBus block functionality not supported!\n");
1691		return -ENODEV;
1692	}
1693	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
1694	if (!chip)
1695		return -ENOMEM;
1696
1697	chip->i2c_client = client;
1698	chip->dev = &client->dev;
1699	mutex_init(&chip->lock);
1700
1701	/*
1702	 * Devicetree platforms should get extcon via phandle (not yet
1703	 * supported). On ACPI platforms, we get the name from a device prop.
1704	 * This device prop is for kernel internal use only and is expected
1705	 * to be set by the platform code which also registers the i2c client
1706	 * for the fusb302.
1707	 */
1708	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
1709		chip->extcon = extcon_get_extcon_dev(name);
1710		if (IS_ERR(chip->extcon))
1711			return PTR_ERR(chip->extcon);
1712	}
1713
1714	chip->vbus = devm_regulator_get(chip->dev, "vbus");
1715	if (IS_ERR(chip->vbus))
1716		return PTR_ERR(chip->vbus);
1717
1718	chip->wq = create_singlethread_workqueue(dev_name(chip->dev));
1719	if (!chip->wq)
1720		return -ENOMEM;
1721
1722	spin_lock_init(&chip->irq_lock);
1723	INIT_WORK(&chip->irq_work, fusb302_irq_work);
1724	INIT_DELAYED_WORK(&chip->bc_lvl_handler, fusb302_bc_lvl_handler_work);
1725	init_tcpc_dev(&chip->tcpc_dev);
1726	fusb302_debugfs_init(chip);
1727
1728	if (client->irq) {
1729		chip->gpio_int_n_irq = client->irq;
1730	} else {
1731		ret = init_gpio(chip);
1732		if (ret < 0)
1733			goto destroy_workqueue;
1734	}
1735
1736	chip->tcpc_dev.fwnode = fusb302_fwnode_get(dev);
1737	if (IS_ERR(chip->tcpc_dev.fwnode)) {
1738		ret = PTR_ERR(chip->tcpc_dev.fwnode);
1739		goto destroy_workqueue;
1740	}
1741
1742	chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev);
1743	if (IS_ERR(chip->tcpm_port)) {
1744		fwnode_handle_put(chip->tcpc_dev.fwnode);
1745		ret = dev_err_probe(dev, PTR_ERR(chip->tcpm_port),
1746				    "cannot register tcpm port\n");
1747		goto destroy_workqueue;
1748	}
1749
1750	ret = request_irq(chip->gpio_int_n_irq, fusb302_irq_intn,
1751			  IRQF_ONESHOT | IRQF_TRIGGER_LOW,
1752			  "fsc_interrupt_int_n", chip);
1753	if (ret < 0) {
1754		dev_err(dev, "cannot request IRQ for GPIO Int_N, ret=%d", ret);
1755		goto tcpm_unregister_port;
1756	}
1757	enable_irq_wake(chip->gpio_int_n_irq);
1758	i2c_set_clientdata(client, chip);
1759
1760	return ret;
1761
1762tcpm_unregister_port:
1763	tcpm_unregister_port(chip->tcpm_port);
1764	fwnode_handle_put(chip->tcpc_dev.fwnode);
1765destroy_workqueue:
1766	fusb302_debugfs_exit(chip);
1767	destroy_workqueue(chip->wq);
1768
1769	return ret;
1770}
1771
1772static void fusb302_remove(struct i2c_client *client)
1773{
1774	struct fusb302_chip *chip = i2c_get_clientdata(client);
1775
1776	disable_irq_wake(chip->gpio_int_n_irq);
1777	free_irq(chip->gpio_int_n_irq, chip);
1778	cancel_work_sync(&chip->irq_work);
1779	cancel_delayed_work_sync(&chip->bc_lvl_handler);
1780	tcpm_unregister_port(chip->tcpm_port);
1781	fwnode_handle_put(chip->tcpc_dev.fwnode);
1782	destroy_workqueue(chip->wq);
1783	fusb302_debugfs_exit(chip);
1784}
1785
1786static int fusb302_pm_suspend(struct device *dev)
1787{
1788	struct fusb302_chip *chip = dev->driver_data;
1789	unsigned long flags;
1790
1791	spin_lock_irqsave(&chip->irq_lock, flags);
1792	chip->irq_suspended = true;
1793	spin_unlock_irqrestore(&chip->irq_lock, flags);
1794
1795	/* Make sure any pending irq_work is finished before the bus suspends */
1796	flush_work(&chip->irq_work);
1797	return 0;
1798}
1799
1800static int fusb302_pm_resume(struct device *dev)
1801{
1802	struct fusb302_chip *chip = dev->driver_data;
1803	unsigned long flags;
1804
1805	spin_lock_irqsave(&chip->irq_lock, flags);
1806	if (chip->irq_while_suspended) {
1807		schedule_work(&chip->irq_work);
1808		chip->irq_while_suspended = false;
1809	}
1810	chip->irq_suspended = false;
1811	spin_unlock_irqrestore(&chip->irq_lock, flags);
1812
1813	return 0;
1814}
1815
1816static const struct of_device_id fusb302_dt_match[] __maybe_unused = {
1817	{.compatible = "fcs,fusb302"},
1818	{},
1819};
1820MODULE_DEVICE_TABLE(of, fusb302_dt_match);
1821
1822static const struct i2c_device_id fusb302_i2c_device_id[] = {
1823	{"typec_fusb302", 0},
1824	{},
1825};
1826MODULE_DEVICE_TABLE(i2c, fusb302_i2c_device_id);
1827
1828static const struct dev_pm_ops fusb302_pm_ops = {
1829	.suspend = fusb302_pm_suspend,
1830	.resume = fusb302_pm_resume,
1831};
1832
1833static struct i2c_driver fusb302_driver = {
1834	.driver = {
1835		   .name = "typec_fusb302",
1836		   .pm = &fusb302_pm_ops,
1837		   .of_match_table = of_match_ptr(fusb302_dt_match),
1838		   },
1839	.probe = fusb302_probe,
1840	.remove = fusb302_remove,
1841	.id_table = fusb302_i2c_device_id,
1842};
1843module_i2c_driver(fusb302_driver);
1844
1845MODULE_AUTHOR("Yueyao Zhu <yueyao.zhu@gmail.com>");
1846MODULE_DESCRIPTION("Fairchild FUSB302 Type-C Chip Driver");
1847MODULE_LICENSE("GPL");
1848