1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * Copyright (c) 2015 MediaTek Inc.
4 * Author:
5 *  Zhigang.Wei <zhigang.wei@mediatek.com>
6 *  Chunfeng.Yun <chunfeng.yun@mediatek.com>
7 */
8
9#ifndef _XHCI_MTK_H_
10#define _XHCI_MTK_H_
11
12#include <linux/clk.h>
13#include <linux/hashtable.h>
14#include <linux/regulator/consumer.h>
15
16#include "xhci.h"
17
18#define BULK_CLKS_NUM	6
19#define BULK_VREGS_NUM	2
20
21/* support at most 64 ep, use 32 size hash table */
22#define SCH_EP_HASH_BITS	5
23
24/**
25 * To simplify scheduler algorithm, set a upper limit for ESIT,
26 * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT,
27 * round down to the limit value, that means allocating more
28 * bandwidth to it.
29 */
30#define XHCI_MTK_MAX_ESIT	(1 << 6)
31#define XHCI_MTK_BW_INDEX(x)	((x) & (XHCI_MTK_MAX_ESIT - 1))
32
33#define UFRAMES_PER_FRAME	8
34#define XHCI_MTK_FRAMES_CNT	(XHCI_MTK_MAX_ESIT / UFRAMES_PER_FRAME)
35
36/**
37 * @fs_bus_bw_out: save bandwidth used by FS/LS OUT eps in each uframes
38 * @fs_bus_bw_in: save bandwidth used by FS/LS IN eps in each uframes
39 * @ls_bus_bw: save bandwidth used by LS eps in each uframes
40 * @fs_frame_bw: save bandwidth used by FS/LS eps in each FS frames
41 * @in_ss_cnt: the count of Start-Split for IN eps
42 * @ep_list: Endpoints using this TT
43 */
44struct mu3h_sch_tt {
45	u16 fs_bus_bw_out[XHCI_MTK_MAX_ESIT];
46	u16 fs_bus_bw_in[XHCI_MTK_MAX_ESIT];
47	u8 ls_bus_bw[XHCI_MTK_MAX_ESIT];
48	u16 fs_frame_bw[XHCI_MTK_FRAMES_CNT];
49	u8 in_ss_cnt[XHCI_MTK_MAX_ESIT];
50	struct list_head ep_list;
51};
52
53/**
54 * struct mu3h_sch_bw_info: schedule information for bandwidth domain
55 *
56 * @bus_bw: array to keep track of bandwidth already used at each uframes
57 *
58 * treat a HS root port as a bandwidth domain, but treat a SS root port as
59 * two bandwidth domains, one for IN eps and another for OUT eps.
60 */
61struct mu3h_sch_bw_info {
62	u32 bus_bw[XHCI_MTK_MAX_ESIT];
63};
64
65/**
66 * struct mu3h_sch_ep_info: schedule information for endpoint
67 *
68 * @esit: unit is 125us, equal to 2 << Interval field in ep-context
69 * @num_esit: number of @esit in a period
70 * @num_budget_microframes: number of continuous uframes
71 *		(@repeat==1) scheduled within the interval
72 * @hentry: hash table entry
73 * @endpoint: linked into bandwidth domain which it belongs to
74 * @tt_endpoint: linked into mu3h_sch_tt's list which it belongs to
75 * @bw_info: bandwidth domain which this endpoint belongs
76 * @sch_tt: mu3h_sch_tt linked into
77 * @ep_type: endpoint type
78 * @maxpkt: max packet size of endpoint
79 * @ep: address of usb_host_endpoint struct
80 * @allocated: the bandwidth is aready allocated from bus_bw
81 * @offset: which uframe of the interval that transfer should be
82 *		scheduled first time within the interval
83 * @repeat: the time gap between two uframes that transfers are
84 *		scheduled within a interval. in the simple algorithm, only
85 *		assign 0 or 1 to it; 0 means using only one uframe in a
86 *		interval, and 1 means using @num_budget_microframes
87 *		continuous uframes
88 * @pkts: number of packets to be transferred in the scheduled uframes
89 * @cs_count: number of CS that host will trigger
90 * @burst_mode: burst mode for scheduling. 0: normal burst mode,
91 *		distribute the bMaxBurst+1 packets for a single burst
92 *		according to @pkts and @repeat, repeate the burst multiple
93 *		times; 1: distribute the (bMaxBurst+1)*(Mult+1) packets
94 *		according to @pkts and @repeat. normal mode is used by
95 *		default
96 * @bw_budget_table: table to record bandwidth budget per microframe
97 */
98struct mu3h_sch_ep_info {
99	u32 esit;
100	u32 num_esit;
101	u32 num_budget_microframes;
102	struct list_head endpoint;
103	struct hlist_node hentry;
104	struct list_head tt_endpoint;
105	struct mu3h_sch_bw_info *bw_info;
106	struct mu3h_sch_tt *sch_tt;
107	u32 ep_type;
108	u32 maxpkt;
109	struct usb_host_endpoint *ep;
110	enum usb_device_speed speed;
111	bool allocated;
112	/*
113	 * mtk xHCI scheduling information put into reserved DWs
114	 * in ep context
115	 */
116	u32 offset;
117	u32 repeat;
118	u32 pkts;
119	u32 cs_count;
120	u32 burst_mode;
121	u32 bw_budget_table[];
122};
123
124#define MU3C_U3_PORT_MAX 4
125#define MU3C_U2_PORT_MAX 5
126
127/**
128 * struct mu3c_ippc_regs: MTK ssusb ip port control registers
129 * @ip_pw_ctr0~3: ip power and clock control registers
130 * @ip_pw_sts1~2: ip power and clock status registers
131 * @ip_xhci_cap: ip xHCI capability register
132 * @u3_ctrl_p[x]: ip usb3 port x control register, only low 4bytes are used
133 * @u2_ctrl_p[x]: ip usb2 port x control register, only low 4bytes are used
134 * @u2_phy_pll: usb2 phy pll control register
135 */
136struct mu3c_ippc_regs {
137	__le32 ip_pw_ctr0;
138	__le32 ip_pw_ctr1;
139	__le32 ip_pw_ctr2;
140	__le32 ip_pw_ctr3;
141	__le32 ip_pw_sts1;
142	__le32 ip_pw_sts2;
143	__le32 reserved0[3];
144	__le32 ip_xhci_cap;
145	__le32 reserved1[2];
146	__le64 u3_ctrl_p[MU3C_U3_PORT_MAX];
147	__le64 u2_ctrl_p[MU3C_U2_PORT_MAX];
148	__le32 reserved2;
149	__le32 u2_phy_pll;
150	__le32 reserved3[33]; /* 0x80 ~ 0xff */
151};
152
153struct xhci_hcd_mtk {
154	struct device *dev;
155	struct usb_hcd *hcd;
156	struct mu3h_sch_bw_info *sch_array;
157	struct list_head bw_ep_chk_list;
158	DECLARE_HASHTABLE(sch_ep_hash, SCH_EP_HASH_BITS);
159	struct mu3c_ippc_regs __iomem *ippc_regs;
160	int num_u2_ports;
161	int num_u3_ports;
162	int u2p_dis_msk;
163	int u3p_dis_msk;
164	struct clk_bulk_data clks[BULK_CLKS_NUM];
165	struct regulator_bulk_data supplies[BULK_VREGS_NUM];
166	unsigned int has_ippc:1;
167	unsigned int lpm_support:1;
168	unsigned int u2_lpm_disable:1;
169	/* usb remote wakeup */
170	unsigned int uwk_en:1;
171	struct regmap *uwk;
172	u32 uwk_reg_base;
173	u32 uwk_vers;
174	/* quirk */
175	u32 rxfifo_depth;
176};
177
178static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd)
179{
180	return dev_get_drvdata(hcd->self.controller);
181}
182
183int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk);
184void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk);
185int xhci_mtk_add_ep(struct usb_hcd *hcd, struct usb_device *udev,
186		    struct usb_host_endpoint *ep);
187int xhci_mtk_drop_ep(struct usb_hcd *hcd, struct usb_device *udev,
188		     struct usb_host_endpoint *ep);
189int xhci_mtk_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
190void xhci_mtk_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
191
192#endif		/* _XHCI_MTK_H_ */
193