1/* SPDX-License-Identifier: GPL-2.0 */
2/******************************************************************************
3 *
4 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
5 *
6 ******************************************************************************/
7#ifndef __RTW_CMD_H_
8#define __RTW_CMD_H_
9
10#include <linux/completion.h>
11
12#define C2H_MEM_SZ (16*1024)
13
14	#define FREE_CMDOBJ_SZ	128
15
16	#define MAX_CMDSZ	1024
17	#define MAX_RSPSZ	512
18	#define MAX_EVTSZ	1024
19
20	#define CMDBUFF_ALIGN_SZ 512
21
22	struct cmd_obj {
23		struct adapter *padapter;
24		u16 cmdcode;
25		u8 res;
26		u8 *parmbuf;
27		u32 cmdsz;
28		u8 *rsp;
29		u32 rspsz;
30		struct submit_ctx *sctx;
31		struct list_head	list;
32	};
33
34	/* cmd flags */
35	enum {
36		RTW_CMDF_DIRECTLY = BIT0,
37		RTW_CMDF_WAIT_ACK = BIT1,
38	};
39
40	struct cmd_priv {
41		struct completion cmd_queue_comp;
42		struct completion terminate_cmdthread_comp;
43		struct __queue	cmd_queue;
44		u8 cmd_seq;
45		u8 *cmd_buf;	/* shall be non-paged, and 4 bytes aligned */
46		u8 *cmd_allocated_buf;
47		u8 *rsp_buf;	/* shall be non-paged, and 4 bytes aligned */
48		u8 *rsp_allocated_buf;
49		u32 cmd_issued_cnt;
50		u32 cmd_done_cnt;
51		u32 rsp_cnt;
52		atomic_t cmdthd_running;
53		/* u8 cmdthd_running; */
54		u8 stop_req;
55		struct adapter *padapter;
56		struct mutex sctx_mutex;
57	};
58
59	struct	evt_priv {
60		struct work_struct c2h_wk;
61		bool c2h_wk_alive;
62		struct rtw_cbuf *c2h_queue;
63		#define C2H_QUEUE_MAX_LEN 10
64
65		atomic_t event_seq;
66		u8 *evt_buf;	/* shall be non-paged, and 4 bytes aligned */
67		u8 *evt_allocated_buf;
68		u32 evt_done_cnt;
69		u8 *c2h_mem;
70		u8 *allocated_c2h_mem;
71	};
72
73#define init_h2fwcmd_w_parm_no_rsp(pcmd, pparm, code) \
74do {\
75	INIT_LIST_HEAD(&pcmd->list);\
76	pcmd->cmdcode = code;\
77	pcmd->parmbuf = (u8 *)(pparm);\
78	pcmd->cmdsz = sizeof(*pparm);\
79	pcmd->rsp = NULL;\
80	pcmd->rspsz = 0;\
81} while (0)
82
83#define init_h2fwcmd_w_parm_no_parm_rsp(pcmd, code) \
84do {\
85	INIT_LIST_HEAD(&pcmd->list);\
86	pcmd->cmdcode = code;\
87	pcmd->parmbuf = NULL;\
88	pcmd->cmdsz = 0;\
89	pcmd->rsp = NULL;\
90	pcmd->rspsz = 0;\
91} while (0)
92
93struct c2h_evt_hdr {
94	u8 id:4;
95	u8 plen:4;
96	u8 seq;
97	u8 payload[];
98};
99
100struct c2h_evt_hdr_88xx {
101	u8 id;
102	u8 seq;
103	u8 payload[12];
104	u8 plen;
105	u8 trigger;
106};
107
108#define c2h_evt_valid(c2h_evt) ((c2h_evt)->id || (c2h_evt)->plen)
109
110int rtw_enqueue_cmd(struct cmd_priv *pcmdpriv, struct cmd_obj *obj);
111extern struct cmd_obj *rtw_dequeue_cmd(struct cmd_priv *pcmdpriv);
112extern void rtw_free_cmd_obj(struct cmd_obj *pcmd);
113
114void rtw_stop_cmd_thread(struct adapter *adapter);
115int rtw_cmd_thread(void *context);
116
117extern void rtw_free_cmd_priv(struct cmd_priv *pcmdpriv);
118
119extern void rtw_free_evt_priv(struct evt_priv *pevtpriv);
120extern void rtw_evt_notify_isr(struct evt_priv *pevtpriv);
121
122enum {
123	NONE_WK_CID,
124	DYNAMIC_CHK_WK_CID,
125	DM_CTRL_WK_CID,
126	PBC_POLLING_WK_CID,
127	POWER_SAVING_CTRL_WK_CID,/* IPS, AUTOSuspend */
128	LPS_CTRL_WK_CID,
129	ANT_SELECT_WK_CID,
130	P2P_PS_WK_CID,
131	P2P_PROTO_WK_CID,
132	CHECK_HIQ_WK_CID,/* for softap mode, check hi queue if empty */
133	INTEl_WIDI_WK_CID,
134	C2H_WK_CID,
135	RTP_TIMER_CFG_WK_CID,
136	RESET_SECURITYPRIV, /*  add for CONFIG_IEEE80211W, none 11w also can use */
137	FREE_ASSOC_RESOURCES, /*  add for CONFIG_IEEE80211W, none 11w also can use */
138	DM_IN_LPS_WK_CID,
139	DM_RA_MSK_WK_CID, /* add for STA update RAMask when bandwidth change. */
140	BEAMFORMING_WK_CID,
141	LPS_CHANGE_DTIM_CID,
142	BTINFO_WK_CID,
143	MAX_WK_CID
144};
145
146enum {
147	LPS_CTRL_SCAN = 0,
148	LPS_CTRL_JOINBSS = 1,
149	LPS_CTRL_CONNECT = 2,
150	LPS_CTRL_DISCONNECT = 3,
151	LPS_CTRL_SPECIAL_PACKET = 4,
152	LPS_CTRL_LEAVE = 5,
153	LPS_CTRL_TRAFFIC_BUSY = 6,
154};
155
156enum {
157	SWSI,
158	HWSI,
159	HWPI,
160};
161
162/*
163Caller Mode: Infra, Ad-HoC
164
165Notes: To join a known BSS.
166
167Command-Event Mode
168
169*/
170
171/*
172Caller Mode: Infra, Ad-Hoc
173
174Notes: To join the specified bss
175
176Command Event Mode
177
178*/
179struct joinbss_parm {
180	struct wlan_bssid_ex network;
181};
182
183/*
184Caller Mode: Infra, Ad-HoC(C)
185
186Notes: To disconnect the current associated BSS
187
188Command Mode
189
190*/
191struct disconnect_parm {
192	u32 deauth_timeout_ms;
193};
194
195/*
196Caller Mode: AP, Ad-HoC(M)
197
198Notes: To create a BSS
199
200Command Mode
201*/
202struct createbss_parm {
203	struct wlan_bssid_ex network;
204};
205
206/*
207Caller Mode: AP, Ad-HoC, Infra
208
209Notes: To set the NIC mode of RTL8711
210
211Command Mode
212
213The definition of mode:
214
215#define IW_MODE_AUTO	0	 Let the driver decides which AP to join
216#define IW_MODE_ADHOC	1	 Single cell network (Ad-Hoc Clients)
217#define IW_MODE_INFRA	2	 Multi cell network, roaming, ..
218#define IW_MODE_MASTER	3	 Synchronisation master or Access Point
219#define IW_MODE_REPEAT	4	 Wireless Repeater (forwarder)
220#define IW_MODE_SECOND	5	 Secondary master/repeater (backup)
221#define IW_MODE_MONITOR	6	 Passive monitor (listen only)
222
223*/
224struct	setopmode_parm {
225	u8 mode;
226	u8 rsvd[3];
227};
228
229/*
230Caller Mode: AP, Ad-HoC, Infra
231
232Notes: To ask RTL8711 performing site-survey
233
234Command-Event Mode
235
236*/
237
238#define RTW_SSID_SCAN_AMOUNT 9 /*  for WEXT_CSCAN_AMOUNT 9 */
239#define RTW_CHANNEL_SCAN_AMOUNT (14+37)
240struct sitesurvey_parm {
241	signed int scan_mode;	/* active: 1, passive: 0 */
242	u8 ssid_num;
243	u8 ch_num;
244	struct ndis_802_11_ssid ssid[RTW_SSID_SCAN_AMOUNT];
245	struct rtw_ieee80211_channel ch[RTW_CHANNEL_SCAN_AMOUNT];
246};
247
248/*
249Caller Mode: Any
250
251Notes: To set the auth type of RTL8711. open/shared/802.1x
252
253Command Mode
254
255*/
256struct setauth_parm {
257	u8 mode;  /* 0: legacy open, 1: legacy shared 2: 802.1x */
258	u8 _1x;   /* 0: PSK, 1: TLS */
259	u8 rsvd[2];
260};
261
262/*
263Caller Mode: Infra
264
265a. algorithm: wep40, wep104, tkip & aes
266b. keytype: grp key/unicast key
267c. key contents
268
269when shared key ==> keyid is the camid
270when 802.1x ==> keyid [0:1] ==> grp key
271when 802.1x ==> keyid > 2 ==> unicast key
272
273*/
274struct setkey_parm {
275	u8 algorithm;	/*  encryption algorithm, could be none, wep40, TKIP, CCMP, wep104 */
276	u8 keyid;
277	u8 grpkey;		/*  1: this is the grpkey for 802.1x. 0: this is the unicast key for 802.1x */
278	u8 set_tx;		/*  1: main tx key for wep. 0: other key. */
279	u8 key[16];	/*  this could be 40 or 104 */
280};
281
282/*
283When in AP or Ad-Hoc mode, this is used to
284allocate an sw/hw entry for a newly associated sta.
285
286Command
287
288when shared key ==> algorithm/keyid
289
290*/
291struct set_stakey_parm {
292	u8 addr[ETH_ALEN];
293	u8 algorithm;
294	u8 keyid;
295	u8 key[16];
296};
297
298struct set_stakey_rsp {
299	u8 addr[ETH_ALEN];
300	u8 keyid;
301	u8 rsvd;
302};
303
304/*
305Caller Ad-Hoc/AP
306
307Command -Rsp(AID == CAMID) mode
308
309This is to force fw to add an sta_data entry per driver's request.
310
311FW will write an cam entry associated with it.
312
313*/
314struct set_assocsta_parm {
315	u8 addr[ETH_ALEN];
316};
317
318struct set_assocsta_rsp {
319	u8 cam_id;
320	u8 rsvd[3];
321};
322
323/*
324	Caller Ad-Hoc/AP
325
326	Command mode
327
328	This is to force fw to del an sta_data entry per driver's request
329
330	FW will invalidate the cam entry associated with it.
331
332*/
333struct del_assocsta_parm {
334	u8 addr[ETH_ALEN];
335};
336
337/*
338Caller Mode: AP/Ad-HoC(M)
339
340Notes: To notify fw that given staid has changed its power state
341
342Command Mode
343
344*/
345struct setstapwrstate_parm {
346	u8 staid;
347	u8 status;
348	u8 hwaddr[6];
349};
350
351/*
352Caller Mode: Any
353
354Notes: To setup the basic rate of RTL8711
355
356Command Mode
357
358*/
359struct	setbasicrate_parm {
360	u8 basicrates[NumRates];
361};
362
363/*
364Caller Mode: Any
365
366Notes: To read the current basic rate
367
368Command-Rsp Mode
369
370*/
371struct getbasicrate_parm {
372	u32 rsvd;
373};
374
375/*
376Caller Mode: Any
377
378Notes: To setup the data rate of RTL8711
379
380Command Mode
381
382*/
383struct setdatarate_parm {
384	u8 mac_id;
385	u8 datarates[NumRates];
386};
387
388/*
389Caller Mode: Any
390
391Notes: To read the current data rate
392
393Command-Rsp Mode
394
395*/
396struct getdatarate_parm {
397	u32 rsvd;
398
399};
400
401/*
402Caller Mode: Any
403AP: AP can use the info for the contents of beacon frame
404Infra: STA can use the info when sitesurveying
405Ad-HoC(M): Like AP
406Ad-HoC(C): Like STA
407
408
409Notes: To set the phy capability of the NIC
410
411Command Mode
412
413*/
414
415struct	setphyinfo_parm {
416	struct regulatory_class class_sets[NUM_REGULATORYS];
417	u8 status;
418};
419
420struct	getphyinfo_parm {
421	u32 rsvd;
422};
423
424/*
425Caller Mode: Any
426
427Notes: To set the channel/modem/band
428This command will be used when channel/modem/band is changed.
429
430Command Mode
431
432*/
433struct	setphy_parm {
434	u8 rfchannel;
435	u8 modem;
436};
437
438/*
439Caller Mode: Any
440
441Notes: To get the current setting of channel/modem/band
442
443Command-Rsp Mode
444
445*/
446struct	getphy_parm {
447	u32 rsvd;
448
449};
450
451struct Tx_Beacon_param {
452	struct wlan_bssid_ex network;
453};
454
455/*
456	Notes: This command is used for H2C/C2H loopback testing
457
458	mac[0] == 0
459	==> CMD mode, return H2C_SUCCESS.
460	The following condition must be true under CMD mode
461		mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
462		s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
463		s2 == (b1 << 8 | b0);
464
465	mac[0] == 1
466	==> CMD_RSP mode, return H2C_SUCCESS_RSP
467
468	The rsp layout shall be:
469	rsp:			parm:
470		mac[0]  =   mac[5];
471		mac[1]  =   mac[4];
472		mac[2]  =   mac[3];
473		mac[3]  =   mac[2];
474		mac[4]  =   mac[1];
475		mac[5]  =   mac[0];
476		s0		=   s1;
477		s1		=   swap16(s0);
478		w0		=	swap32(w1);
479		b0		=	b1
480		s2		=	s0 + s1
481		b1		=	b0
482		w1		=	w0
483
484	mac[0] ==	2
485	==> CMD_EVENT mode, return	H2C_SUCCESS
486	The event layout shall be:
487	event:			parm:
488		mac[0]  =   mac[5];
489		mac[1]  =   mac[4];
490		mac[2]  =   event's sequence number, starting from 1 to parm's marc[3]
491		mac[3]  =   mac[2];
492		mac[4]  =   mac[1];
493		mac[5]  =   mac[0];
494		s0		=   swap16(s0) - event.mac[2];
495		s1		=   s1 + event.mac[2];
496		w0		=	swap32(w0);
497		b0		=	b1
498		s2		=	s0 + event.mac[2]
499		b1		=	b0
500		w1		=	swap32(w1) - event.mac[2];
501
502		parm->mac[3] is the total event counts that host requested.
503
504
505	event will be the same with the cmd's param.
506
507*/
508
509/*  CMD param Formart for driver extra cmd handler */
510struct drvextra_cmd_parm {
511	int ec_id; /* extra cmd id */
512	int type; /*  Can use this field as the type id or command size */
513	int size; /* buffer size */
514	unsigned char *pbuf;
515};
516
517/*------------------- Below are used for RF/BB tuning ---------------------*/
518
519struct	getcountjudge_rsp {
520	u8 count_judge[MAX_RATES_LENGTH];
521};
522
523struct addBaReq_parm {
524	unsigned int tid;
525	u8 addr[ETH_ALEN];
526};
527
528/*H2C Handler index: 46 */
529struct set_ch_parm {
530	u8 ch;
531	u8 bw;
532	u8 ch_offset;
533};
534
535/*H2C Handler index: 59 */
536struct SetChannelPlan_param {
537	u8 channel_plan;
538};
539
540/*H2C Handler index: 61 */
541struct SetChannelSwitch_param {
542	u8 new_ch_no;
543};
544
545/*H2C Handler index: 62 */
546struct TDLSoption_param {
547	u8 addr[ETH_ALEN];
548	u8 option;
549};
550
551/*H2C Handler index: 64 */
552struct RunInThread_param {
553	void (*func)(void *);
554	void *context;
555};
556
557
558#define GEN_CMD_CODE(cmd)	cmd ## _CMD_
559
560
561/*
562
563Result:
5640x00: success
5650x01: success, and check Response.
5660x02: cmd ignored due to duplicated sequcne number
5670x03: cmd dropped due to invalid cmd code
5680x04: reserved.
569
570*/
571
572#define H2C_RSP_OFFSET			512
573
574#define H2C_SUCCESS			0x00
575#define H2C_SUCCESS_RSP			0x01
576#define H2C_DUPLICATED			0x02
577#define H2C_DROPPED			0x03
578#define H2C_PARAMETERS_ERROR		0x04
579#define H2C_REJECTED			0x05
580#define H2C_CMD_OVERFLOW		0x06
581#define H2C_RESERVED			0x07
582
583u8 rtw_sitesurvey_cmd(struct adapter  *padapter, struct ndis_802_11_ssid *ssid, int ssid_num, struct rtw_ieee80211_channel *ch, int ch_num);
584extern u8 rtw_createbss_cmd(struct adapter  *padapter);
585int rtw_startbss_cmd(struct adapter  *padapter, int flags);
586
587struct sta_info;
588extern u8 rtw_setstakey_cmd(struct adapter  *padapter, struct sta_info *sta, u8 unicast_key, bool enqueue);
589extern u8 rtw_clearstakey_cmd(struct adapter *padapter, struct sta_info *sta, u8 enqueue);
590
591extern u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network *pnetwork);
592u8 rtw_disassoc_cmd(struct adapter *padapter, u32 deauth_timeout_ms, bool enqueue);
593extern u8 rtw_setopmode_cmd(struct adapter  *padapter, enum ndis_802_11_network_infrastructure networktype, bool enqueue);
594extern u8 rtw_setrfintfs_cmd(struct adapter  *padapter, u8 mode);
595
596extern u8 rtw_gettssi_cmd(struct adapter  *padapter, u8 offset, u8 *pval);
597extern u8 rtw_setfwdig_cmd(struct adapter *padapter, u8 type);
598extern u8 rtw_setfwra_cmd(struct adapter *padapter, u8 type);
599
600extern u8 rtw_addbareq_cmd(struct adapter *padapter, u8 tid, u8 *addr);
601/*  add for CONFIG_IEEE80211W, none 11w also can use */
602extern u8 rtw_reset_securitypriv_cmd(struct adapter *padapter);
603extern u8 rtw_free_assoc_resources_cmd(struct adapter *padapter);
604extern u8 rtw_dynamic_chk_wk_cmd(struct adapter *adapter);
605
606u8 rtw_lps_ctrl_wk_cmd(struct adapter *padapter, u8 lps_ctrl_type, u8 enqueue);
607u8 rtw_dm_in_lps_wk_cmd(struct adapter *padapter);
608
609u8 rtw_dm_ra_mask_wk_cmd(struct adapter *padapter, u8 *psta);
610
611extern u8 rtw_ps_cmd(struct adapter *padapter);
612
613u8 rtw_chk_hi_queue_cmd(struct adapter *padapter);
614
615extern u8 rtw_c2h_packet_wk_cmd(struct adapter *padapter, u8 *pbuf, u16 length);
616extern u8 rtw_c2h_wk_cmd(struct adapter *padapter, u8 *c2h_evt);
617
618u8 rtw_drvextra_cmd_hdl(struct adapter *padapter, unsigned char *pbuf);
619
620extern void rtw_survey_cmd_callback(struct adapter  *padapter, struct cmd_obj *pcmd);
621extern void rtw_disassoc_cmd_callback(struct adapter  *padapter, struct cmd_obj *pcmd);
622extern void rtw_joinbss_cmd_callback(struct adapter  *padapter, struct cmd_obj *pcmd);
623extern void rtw_createbss_cmd_callback(struct adapter  *padapter, struct cmd_obj *pcmd);
624extern void rtw_getbbrfreg_cmdrsp_callback(struct adapter  *padapter, struct cmd_obj *pcmd);
625
626extern void rtw_setstaKey_cmdrsp_callback(struct adapter  *padapter,  struct cmd_obj *pcmd);
627extern void rtw_setassocsta_cmdrsp_callback(struct adapter  *padapter,  struct cmd_obj *pcmd);
628extern void rtw_getrttbl_cmdrsp_callback(struct adapter  *padapter,  struct cmd_obj *pcmd);
629
630
631struct _cmd_callback {
632	u32 cmd_code;
633	void (*callback)(struct adapter  *padapter, struct cmd_obj *cmd);
634};
635
636enum {
637	GEN_CMD_CODE(_Read_MACREG),	/*0*/
638	GEN_CMD_CODE(_Write_MACREG),
639	GEN_CMD_CODE(_Read_BBREG),
640	GEN_CMD_CODE(_Write_BBREG),
641	GEN_CMD_CODE(_Read_RFREG),
642	GEN_CMD_CODE(_Write_RFREG), /*5*/
643	GEN_CMD_CODE(_Read_EEPROM),
644	GEN_CMD_CODE(_Write_EEPROM),
645	GEN_CMD_CODE(_Read_EFUSE),
646	GEN_CMD_CODE(_Write_EFUSE),
647
648	GEN_CMD_CODE(_Read_CAM),	/*10*/
649	GEN_CMD_CODE(_Write_CAM),
650	GEN_CMD_CODE(_setBCNITV),
651	GEN_CMD_CODE(_setMBIDCFG),
652	GEN_CMD_CODE(_JoinBss),   /*14*/
653	GEN_CMD_CODE(_DisConnect), /*15*/
654	GEN_CMD_CODE(_CreateBss),
655	GEN_CMD_CODE(_SetOpMode),
656	GEN_CMD_CODE(_SiteSurvey),  /*18*/
657	GEN_CMD_CODE(_SetAuth),
658
659	GEN_CMD_CODE(_SetKey),	/*20*/
660	GEN_CMD_CODE(_SetStaKey),
661	GEN_CMD_CODE(_SetAssocSta),
662	GEN_CMD_CODE(_DelAssocSta),
663	GEN_CMD_CODE(_SetStaPwrState),
664	GEN_CMD_CODE(_SetBasicRate), /*25*/
665	GEN_CMD_CODE(_GetBasicRate),
666	GEN_CMD_CODE(_SetDataRate),
667	GEN_CMD_CODE(_GetDataRate),
668	GEN_CMD_CODE(_SetPhyInfo),
669
670	GEN_CMD_CODE(_GetPhyInfo),	/*30*/
671	GEN_CMD_CODE(_SetPhy),
672	GEN_CMD_CODE(_GetPhy),
673	GEN_CMD_CODE(_readRssi),
674	GEN_CMD_CODE(_readGain),
675	GEN_CMD_CODE(_SetAtim), /*35*/
676	GEN_CMD_CODE(_SetPwrMode),
677	GEN_CMD_CODE(_JoinbssRpt),
678	GEN_CMD_CODE(_SetRaTable),
679	GEN_CMD_CODE(_GetRaTable),
680
681	GEN_CMD_CODE(_GetCCXReport), /*40*/
682	GEN_CMD_CODE(_GetDTMReport),
683	GEN_CMD_CODE(_GetTXRateStatistics),
684	GEN_CMD_CODE(_SetUsbSuspend),
685	GEN_CMD_CODE(_SetH2cLbk),
686	GEN_CMD_CODE(_AddBAReq), /*45*/
687	GEN_CMD_CODE(_SetChannel), /*46*/
688	GEN_CMD_CODE(_SetTxPower),
689	GEN_CMD_CODE(_SwitchAntenna),
690	GEN_CMD_CODE(_SetCrystalCap),
691	GEN_CMD_CODE(_SetSingleCarrierTx), /*50*/
692
693	GEN_CMD_CODE(_SetSingleToneTx),/*51*/
694	GEN_CMD_CODE(_SetCarrierSuppressionTx),
695	GEN_CMD_CODE(_SetContinuousTx),
696	GEN_CMD_CODE(_SwitchBandwidth), /*54*/
697	GEN_CMD_CODE(_TX_Beacon), /*55*/
698
699	GEN_CMD_CODE(_Set_MLME_EVT), /*56*/
700	GEN_CMD_CODE(_Set_Drv_Extra), /*57*/
701	GEN_CMD_CODE(_Set_H2C_MSG), /*58*/
702
703	GEN_CMD_CODE(_SetChannelPlan), /*59*/
704
705	GEN_CMD_CODE(_SetChannelSwitch), /*60*/
706	GEN_CMD_CODE(_TDLS), /*61*/
707	GEN_CMD_CODE(_ChkBMCSleepq), /*62*/
708
709	GEN_CMD_CODE(_RunInThreadCMD), /*63*/
710
711	MAX_H2CCMD
712};
713
714#define _GetBBReg_CMD_		_Read_BBREG_CMD_
715#define _SetBBReg_CMD_		_Write_BBREG_CMD_
716#define _GetRFReg_CMD_		_Read_RFREG_CMD_
717#define _SetRFReg_CMD_		_Write_RFREG_CMD_
718
719#endif /*  _CMD_H_ */
720