1// SPDX-License-Identifier: (GPL-2.0) 2/* 3 * Microchip CoreSPI SPI controller driver 4 * 5 * Copyright (c) 2018-2022 Microchip Technology Inc. and its subsidiaries 6 * 7 * Author: Daire McNamara <daire.mcnamara@microchip.com> 8 * Author: Conor Dooley <conor.dooley@microchip.com> 9 * 10 */ 11 12#include <linux/clk.h> 13#include <linux/delay.h> 14#include <linux/err.h> 15#include <linux/init.h> 16#include <linux/interrupt.h> 17#include <linux/io.h> 18#include <linux/module.h> 19#include <linux/of.h> 20#include <linux/platform_device.h> 21#include <linux/spi/spi.h> 22 23#define MAX_LEN (0xffff) 24#define MAX_CS (8) 25#define DEFAULT_FRAMESIZE (8) 26#define FIFO_DEPTH (32) 27#define CLK_GEN_MODE1_MAX (255) 28#define CLK_GEN_MODE0_MAX (15) 29#define CLK_GEN_MIN (0) 30#define MODE_X_MASK_SHIFT (24) 31 32#define CONTROL_ENABLE BIT(0) 33#define CONTROL_MASTER BIT(1) 34#define CONTROL_RX_DATA_INT BIT(4) 35#define CONTROL_TX_DATA_INT BIT(5) 36#define CONTROL_RX_OVER_INT BIT(6) 37#define CONTROL_TX_UNDER_INT BIT(7) 38#define CONTROL_SPO BIT(24) 39#define CONTROL_SPH BIT(25) 40#define CONTROL_SPS BIT(26) 41#define CONTROL_FRAMEURUN BIT(27) 42#define CONTROL_CLKMODE BIT(28) 43#define CONTROL_BIGFIFO BIT(29) 44#define CONTROL_OENOFF BIT(30) 45#define CONTROL_RESET BIT(31) 46 47#define CONTROL_MODE_MASK GENMASK(3, 2) 48#define MOTOROLA_MODE (0) 49#define CONTROL_FRAMECNT_MASK GENMASK(23, 8) 50#define CONTROL_FRAMECNT_SHIFT (8) 51 52#define STATUS_ACTIVE BIT(14) 53#define STATUS_SSEL BIT(13) 54#define STATUS_FRAMESTART BIT(12) 55#define STATUS_TXFIFO_EMPTY_NEXT_READ BIT(11) 56#define STATUS_TXFIFO_EMPTY BIT(10) 57#define STATUS_TXFIFO_FULL_NEXT_WRITE BIT(9) 58#define STATUS_TXFIFO_FULL BIT(8) 59#define STATUS_RXFIFO_EMPTY_NEXT_READ BIT(7) 60#define STATUS_RXFIFO_EMPTY BIT(6) 61#define STATUS_RXFIFO_FULL_NEXT_WRITE BIT(5) 62#define STATUS_RXFIFO_FULL BIT(4) 63#define STATUS_TX_UNDERRUN BIT(3) 64#define STATUS_RX_OVERFLOW BIT(2) 65#define STATUS_RXDAT_RXED BIT(1) 66#define STATUS_TXDAT_SENT BIT(0) 67 68#define INT_TXDONE BIT(0) 69#define INT_RXRDY BIT(1) 70#define INT_RX_CHANNEL_OVERFLOW BIT(2) 71#define INT_TX_CHANNEL_UNDERRUN BIT(3) 72 73#define INT_ENABLE_MASK (CONTROL_RX_DATA_INT | CONTROL_TX_DATA_INT | \ 74 CONTROL_RX_OVER_INT | CONTROL_TX_UNDER_INT) 75 76#define REG_CONTROL (0x00) 77#define REG_FRAME_SIZE (0x04) 78#define REG_STATUS (0x08) 79#define REG_INT_CLEAR (0x0c) 80#define REG_RX_DATA (0x10) 81#define REG_TX_DATA (0x14) 82#define REG_CLK_GEN (0x18) 83#define REG_SLAVE_SELECT (0x1c) 84#define SSEL_MASK GENMASK(7, 0) 85#define SSEL_DIRECT BIT(8) 86#define SSELOUT_SHIFT 9 87#define SSELOUT BIT(SSELOUT_SHIFT) 88#define REG_MIS (0x20) 89#define REG_RIS (0x24) 90#define REG_CONTROL2 (0x28) 91#define REG_COMMAND (0x2c) 92#define REG_PKTSIZE (0x30) 93#define REG_CMD_SIZE (0x34) 94#define REG_HWSTATUS (0x38) 95#define REG_STAT8 (0x3c) 96#define REG_CTRL2 (0x48) 97#define REG_FRAMESUP (0x50) 98 99struct mchp_corespi { 100 void __iomem *regs; 101 struct clk *clk; 102 const u8 *tx_buf; 103 u8 *rx_buf; 104 u32 clk_gen; /* divider for spi output clock generated by the controller */ 105 u32 clk_mode; 106 int irq; 107 int tx_len; 108 int rx_len; 109 int pending; 110}; 111 112static inline u32 mchp_corespi_read(struct mchp_corespi *spi, unsigned int reg) 113{ 114 return readl(spi->regs + reg); 115} 116 117static inline void mchp_corespi_write(struct mchp_corespi *spi, unsigned int reg, u32 val) 118{ 119 writel(val, spi->regs + reg); 120} 121 122static inline void mchp_corespi_disable(struct mchp_corespi *spi) 123{ 124 u32 control = mchp_corespi_read(spi, REG_CONTROL); 125 126 control &= ~CONTROL_ENABLE; 127 128 mchp_corespi_write(spi, REG_CONTROL, control); 129} 130 131static inline void mchp_corespi_read_fifo(struct mchp_corespi *spi) 132{ 133 u8 data; 134 int fifo_max, i = 0; 135 136 fifo_max = min(spi->rx_len, FIFO_DEPTH); 137 138 while ((i < fifo_max) && !(mchp_corespi_read(spi, REG_STATUS) & STATUS_RXFIFO_EMPTY)) { 139 data = mchp_corespi_read(spi, REG_RX_DATA); 140 141 if (spi->rx_buf) 142 *spi->rx_buf++ = data; 143 i++; 144 } 145 spi->rx_len -= i; 146 spi->pending -= i; 147} 148 149static void mchp_corespi_enable_ints(struct mchp_corespi *spi) 150{ 151 u32 control, mask = INT_ENABLE_MASK; 152 153 mchp_corespi_disable(spi); 154 155 control = mchp_corespi_read(spi, REG_CONTROL); 156 157 control |= mask; 158 mchp_corespi_write(spi, REG_CONTROL, control); 159 160 control |= CONTROL_ENABLE; 161 mchp_corespi_write(spi, REG_CONTROL, control); 162} 163 164static void mchp_corespi_disable_ints(struct mchp_corespi *spi) 165{ 166 u32 control, mask = INT_ENABLE_MASK; 167 168 mchp_corespi_disable(spi); 169 170 control = mchp_corespi_read(spi, REG_CONTROL); 171 control &= ~mask; 172 mchp_corespi_write(spi, REG_CONTROL, control); 173 174 control |= CONTROL_ENABLE; 175 mchp_corespi_write(spi, REG_CONTROL, control); 176} 177 178static inline void mchp_corespi_set_xfer_size(struct mchp_corespi *spi, int len) 179{ 180 u32 control; 181 u16 lenpart; 182 183 /* 184 * Disable the SPI controller. Writes to transfer length have 185 * no effect when the controller is enabled. 186 */ 187 mchp_corespi_disable(spi); 188 189 /* 190 * The lower 16 bits of the frame count are stored in the control reg 191 * for legacy reasons, but the upper 16 written to a different register: 192 * FRAMESUP. While both the upper and lower bits can be *READ* from the 193 * FRAMESUP register, writing to the lower 16 bits is a NOP 194 */ 195 lenpart = len & 0xffff; 196 197 control = mchp_corespi_read(spi, REG_CONTROL); 198 control &= ~CONTROL_FRAMECNT_MASK; 199 control |= lenpart << CONTROL_FRAMECNT_SHIFT; 200 mchp_corespi_write(spi, REG_CONTROL, control); 201 202 lenpart = len & 0xffff0000; 203 mchp_corespi_write(spi, REG_FRAMESUP, lenpart); 204 205 control |= CONTROL_ENABLE; 206 mchp_corespi_write(spi, REG_CONTROL, control); 207} 208 209static inline void mchp_corespi_write_fifo(struct mchp_corespi *spi) 210{ 211 u8 byte; 212 int fifo_max, i = 0; 213 214 fifo_max = min(spi->tx_len, FIFO_DEPTH); 215 mchp_corespi_set_xfer_size(spi, fifo_max); 216 217 while ((i < fifo_max) && !(mchp_corespi_read(spi, REG_STATUS) & STATUS_TXFIFO_FULL)) { 218 byte = spi->tx_buf ? *spi->tx_buf++ : 0xaa; 219 mchp_corespi_write(spi, REG_TX_DATA, byte); 220 i++; 221 } 222 223 spi->tx_len -= i; 224 spi->pending += i; 225} 226 227static inline void mchp_corespi_set_framesize(struct mchp_corespi *spi, int bt) 228{ 229 u32 control; 230 231 /* 232 * Disable the SPI controller. Writes to the frame size have 233 * no effect when the controller is enabled. 234 */ 235 mchp_corespi_disable(spi); 236 237 mchp_corespi_write(spi, REG_FRAME_SIZE, bt); 238 239 control = mchp_corespi_read(spi, REG_CONTROL); 240 control |= CONTROL_ENABLE; 241 mchp_corespi_write(spi, REG_CONTROL, control); 242} 243 244static void mchp_corespi_set_cs(struct spi_device *spi, bool disable) 245{ 246 u32 reg; 247 struct mchp_corespi *corespi = spi_controller_get_devdata(spi->controller); 248 249 reg = mchp_corespi_read(corespi, REG_SLAVE_SELECT); 250 reg &= ~BIT(spi_get_chipselect(spi, 0)); 251 reg |= !disable << spi_get_chipselect(spi, 0); 252 253 mchp_corespi_write(corespi, REG_SLAVE_SELECT, reg); 254} 255 256static int mchp_corespi_setup(struct spi_device *spi) 257{ 258 struct mchp_corespi *corespi = spi_controller_get_devdata(spi->controller); 259 u32 reg; 260 261 /* 262 * Active high targets need to be specifically set to their inactive 263 * states during probe by adding them to the "control group" & thus 264 * driving their select line low. 265 */ 266 if (spi->mode & SPI_CS_HIGH) { 267 reg = mchp_corespi_read(corespi, REG_SLAVE_SELECT); 268 reg |= BIT(spi_get_chipselect(spi, 0)); 269 mchp_corespi_write(corespi, REG_SLAVE_SELECT, reg); 270 } 271 return 0; 272} 273 274static void mchp_corespi_init(struct spi_controller *host, struct mchp_corespi *spi) 275{ 276 unsigned long clk_hz; 277 u32 control = mchp_corespi_read(spi, REG_CONTROL); 278 279 control |= CONTROL_MASTER; 280 281 control &= ~CONTROL_MODE_MASK; 282 control |= MOTOROLA_MODE; 283 284 mchp_corespi_set_framesize(spi, DEFAULT_FRAMESIZE); 285 286 /* max. possible spi clock rate is the apb clock rate */ 287 clk_hz = clk_get_rate(spi->clk); 288 host->max_speed_hz = clk_hz; 289 290 /* 291 * The controller must be configured so that it doesn't remove Chip 292 * Select until the entire message has been transferred, even if at 293 * some points TX FIFO becomes empty. 294 * 295 * BIGFIFO mode is also enabled, which sets the fifo depth to 32 frames 296 * for the 8 bit transfers that this driver uses. 297 */ 298 control = mchp_corespi_read(spi, REG_CONTROL); 299 control |= CONTROL_SPS | CONTROL_BIGFIFO; 300 301 mchp_corespi_write(spi, REG_CONTROL, control); 302 303 mchp_corespi_enable_ints(spi); 304 305 /* 306 * It is required to enable direct mode, otherwise control over the chip 307 * select is relinquished to the hardware. SSELOUT is enabled too so we 308 * can deal with active high targets. 309 */ 310 mchp_corespi_write(spi, REG_SLAVE_SELECT, SSELOUT | SSEL_DIRECT); 311 312 control = mchp_corespi_read(spi, REG_CONTROL); 313 314 control &= ~CONTROL_RESET; 315 control |= CONTROL_ENABLE; 316 317 mchp_corespi_write(spi, REG_CONTROL, control); 318} 319 320static inline void mchp_corespi_set_clk_gen(struct mchp_corespi *spi) 321{ 322 u32 control; 323 324 mchp_corespi_disable(spi); 325 326 control = mchp_corespi_read(spi, REG_CONTROL); 327 if (spi->clk_mode) 328 control |= CONTROL_CLKMODE; 329 else 330 control &= ~CONTROL_CLKMODE; 331 332 mchp_corespi_write(spi, REG_CLK_GEN, spi->clk_gen); 333 mchp_corespi_write(spi, REG_CONTROL, control); 334 mchp_corespi_write(spi, REG_CONTROL, control | CONTROL_ENABLE); 335} 336 337static inline void mchp_corespi_set_mode(struct mchp_corespi *spi, unsigned int mode) 338{ 339 u32 control, mode_val; 340 341 switch (mode & SPI_MODE_X_MASK) { 342 case SPI_MODE_0: 343 mode_val = 0; 344 break; 345 case SPI_MODE_1: 346 mode_val = CONTROL_SPH; 347 break; 348 case SPI_MODE_2: 349 mode_val = CONTROL_SPO; 350 break; 351 case SPI_MODE_3: 352 mode_val = CONTROL_SPH | CONTROL_SPO; 353 break; 354 } 355 356 /* 357 * Disable the SPI controller. Writes to the frame size have 358 * no effect when the controller is enabled. 359 */ 360 mchp_corespi_disable(spi); 361 362 control = mchp_corespi_read(spi, REG_CONTROL); 363 control &= ~(SPI_MODE_X_MASK << MODE_X_MASK_SHIFT); 364 control |= mode_val; 365 366 mchp_corespi_write(spi, REG_CONTROL, control); 367 368 control |= CONTROL_ENABLE; 369 mchp_corespi_write(spi, REG_CONTROL, control); 370} 371 372static irqreturn_t mchp_corespi_interrupt(int irq, void *dev_id) 373{ 374 struct spi_controller *host = dev_id; 375 struct mchp_corespi *spi = spi_controller_get_devdata(host); 376 u32 intfield = mchp_corespi_read(spi, REG_MIS) & 0xf; 377 bool finalise = false; 378 379 /* Interrupt line may be shared and not for us at all */ 380 if (intfield == 0) 381 return IRQ_NONE; 382 383 if (intfield & INT_TXDONE) { 384 mchp_corespi_write(spi, REG_INT_CLEAR, INT_TXDONE); 385 386 if (spi->rx_len) 387 mchp_corespi_read_fifo(spi); 388 389 if (spi->tx_len) 390 mchp_corespi_write_fifo(spi); 391 392 if (!spi->rx_len) 393 finalise = true; 394 } 395 396 if (intfield & INT_RXRDY) 397 mchp_corespi_write(spi, REG_INT_CLEAR, INT_RXRDY); 398 399 if (intfield & INT_RX_CHANNEL_OVERFLOW) { 400 mchp_corespi_write(spi, REG_INT_CLEAR, INT_RX_CHANNEL_OVERFLOW); 401 finalise = true; 402 dev_err(&host->dev, 403 "%s: RX OVERFLOW: rxlen: %d, txlen: %d\n", __func__, 404 spi->rx_len, spi->tx_len); 405 } 406 407 if (intfield & INT_TX_CHANNEL_UNDERRUN) { 408 mchp_corespi_write(spi, REG_INT_CLEAR, INT_TX_CHANNEL_UNDERRUN); 409 finalise = true; 410 dev_err(&host->dev, 411 "%s: TX UNDERFLOW: rxlen: %d, txlen: %d\n", __func__, 412 spi->rx_len, spi->tx_len); 413 } 414 415 if (finalise) 416 spi_finalize_current_transfer(host); 417 418 return IRQ_HANDLED; 419} 420 421static int mchp_corespi_calculate_clkgen(struct mchp_corespi *spi, 422 unsigned long target_hz) 423{ 424 unsigned long clk_hz, spi_hz, clk_gen; 425 426 clk_hz = clk_get_rate(spi->clk); 427 if (!clk_hz) 428 return -EINVAL; 429 spi_hz = min(target_hz, clk_hz); 430 431 /* 432 * There are two possible clock modes for the controller generated 433 * clock's division ratio: 434 * CLK_MODE = 0: 1 / (2^(CLK_GEN + 1)) where CLK_GEN = 0 to 15. 435 * CLK_MODE = 1: 1 / (2 * CLK_GEN + 1) where CLK_GEN = 0 to 255. 436 * First try mode 1, fall back to 0 and if we have tried both modes and 437 * we /still/ can't get a good setting, we then throw the toys out of 438 * the pram and give up 439 * clk_gen is the register name for the clock divider on MPFS. 440 */ 441 clk_gen = DIV_ROUND_UP(clk_hz, 2 * spi_hz) - 1; 442 if (clk_gen > CLK_GEN_MODE1_MAX || clk_gen <= CLK_GEN_MIN) { 443 clk_gen = DIV_ROUND_UP(clk_hz, spi_hz); 444 clk_gen = fls(clk_gen) - 1; 445 446 if (clk_gen > CLK_GEN_MODE0_MAX) 447 return -EINVAL; 448 449 spi->clk_mode = 0; 450 } else { 451 spi->clk_mode = 1; 452 } 453 454 spi->clk_gen = clk_gen; 455 return 0; 456} 457 458static int mchp_corespi_transfer_one(struct spi_controller *host, 459 struct spi_device *spi_dev, 460 struct spi_transfer *xfer) 461{ 462 struct mchp_corespi *spi = spi_controller_get_devdata(host); 463 int ret; 464 465 ret = mchp_corespi_calculate_clkgen(spi, (unsigned long)xfer->speed_hz); 466 if (ret) { 467 dev_err(&host->dev, "failed to set clk_gen for target %u Hz\n", xfer->speed_hz); 468 return ret; 469 } 470 471 mchp_corespi_set_clk_gen(spi); 472 473 spi->tx_buf = xfer->tx_buf; 474 spi->rx_buf = xfer->rx_buf; 475 spi->tx_len = xfer->len; 476 spi->rx_len = xfer->len; 477 spi->pending = 0; 478 479 mchp_corespi_set_xfer_size(spi, (spi->tx_len > FIFO_DEPTH) 480 ? FIFO_DEPTH : spi->tx_len); 481 482 if (spi->tx_len) 483 mchp_corespi_write_fifo(spi); 484 return 1; 485} 486 487static int mchp_corespi_prepare_message(struct spi_controller *host, 488 struct spi_message *msg) 489{ 490 struct spi_device *spi_dev = msg->spi; 491 struct mchp_corespi *spi = spi_controller_get_devdata(host); 492 493 mchp_corespi_set_framesize(spi, DEFAULT_FRAMESIZE); 494 mchp_corespi_set_mode(spi, spi_dev->mode); 495 496 return 0; 497} 498 499static int mchp_corespi_probe(struct platform_device *pdev) 500{ 501 struct spi_controller *host; 502 struct mchp_corespi *spi; 503 struct resource *res; 504 u32 num_cs; 505 int ret = 0; 506 507 host = devm_spi_alloc_host(&pdev->dev, sizeof(*spi)); 508 if (!host) 509 return dev_err_probe(&pdev->dev, -ENOMEM, 510 "unable to allocate host for SPI controller\n"); 511 512 platform_set_drvdata(pdev, host); 513 514 if (of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs)) 515 num_cs = MAX_CS; 516 517 host->num_chipselect = num_cs; 518 host->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; 519 host->setup = mchp_corespi_setup; 520 host->bits_per_word_mask = SPI_BPW_MASK(8); 521 host->transfer_one = mchp_corespi_transfer_one; 522 host->prepare_message = mchp_corespi_prepare_message; 523 host->set_cs = mchp_corespi_set_cs; 524 host->dev.of_node = pdev->dev.of_node; 525 526 spi = spi_controller_get_devdata(host); 527 528 spi->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res); 529 if (IS_ERR(spi->regs)) 530 return PTR_ERR(spi->regs); 531 532 spi->irq = platform_get_irq(pdev, 0); 533 if (spi->irq < 0) 534 return spi->irq; 535 536 ret = devm_request_irq(&pdev->dev, spi->irq, mchp_corespi_interrupt, 537 IRQF_SHARED, dev_name(&pdev->dev), host); 538 if (ret) 539 return dev_err_probe(&pdev->dev, ret, 540 "could not request irq\n"); 541 542 spi->clk = devm_clk_get_enabled(&pdev->dev, NULL); 543 if (IS_ERR(spi->clk)) 544 return dev_err_probe(&pdev->dev, PTR_ERR(spi->clk), 545 "could not get clk\n"); 546 547 mchp_corespi_init(host, spi); 548 549 ret = devm_spi_register_controller(&pdev->dev, host); 550 if (ret) { 551 mchp_corespi_disable(spi); 552 return dev_err_probe(&pdev->dev, ret, 553 "unable to register host for SPI controller\n"); 554 } 555 556 dev_info(&pdev->dev, "Registered SPI controller %d\n", host->bus_num); 557 558 return 0; 559} 560 561static void mchp_corespi_remove(struct platform_device *pdev) 562{ 563 struct spi_controller *host = platform_get_drvdata(pdev); 564 struct mchp_corespi *spi = spi_controller_get_devdata(host); 565 566 mchp_corespi_disable_ints(spi); 567 mchp_corespi_disable(spi); 568} 569 570#define MICROCHIP_SPI_PM_OPS (NULL) 571 572/* 573 * Platform driver data structure 574 */ 575 576#if defined(CONFIG_OF) 577static const struct of_device_id mchp_corespi_dt_ids[] = { 578 { .compatible = "microchip,mpfs-spi" }, 579 { /* sentinel */ } 580}; 581MODULE_DEVICE_TABLE(of, mchp_corespi_dt_ids); 582#endif 583 584static struct platform_driver mchp_corespi_driver = { 585 .probe = mchp_corespi_probe, 586 .driver = { 587 .name = "microchip-corespi", 588 .pm = MICROCHIP_SPI_PM_OPS, 589 .of_match_table = of_match_ptr(mchp_corespi_dt_ids), 590 }, 591 .remove_new = mchp_corespi_remove, 592}; 593module_platform_driver(mchp_corespi_driver); 594MODULE_DESCRIPTION("Microchip coreSPI SPI controller driver"); 595MODULE_AUTHOR("Daire McNamara <daire.mcnamara@microchip.com>"); 596MODULE_AUTHOR("Conor Dooley <conor.dooley@microchip.com>"); 597MODULE_LICENSE("GPL"); 598