1/* 2 * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver 3 * 4 * Copyright (c) 2008-2009 USI Co., Ltd. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification. 13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 14 * substantially similar to the "NO WARRANTY" disclaimer below 15 * ("Disclaimer") and any redistribution must be conditioned upon 16 * including a substantially similar Disclaimer requirement for further 17 * binary redistribution. 18 * 3. Neither the names of the above-listed copyright holders nor the names 19 * of any contributors may be used to endorse or promote products derived 20 * from this software without specific prior written permission. 21 * 22 * Alternatively, this software may be distributed under the terms of the 23 * GNU General Public License ("GPL") version 2 as published by the Free 24 * Software Foundation. 25 * 26 * NO WARRANTY 27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 37 * POSSIBILITY OF SUCH DAMAGES. 38 * 39 */ 40 41#include <linux/slab.h> 42#include "pm8001_sas.h" 43#include "pm80xx_tracepoints.h" 44 45/** 46 * pm8001_find_tag - from sas task to find out tag that belongs to this task 47 * @task: the task sent to the LLDD 48 * @tag: the found tag associated with the task 49 */ 50static int pm8001_find_tag(struct sas_task *task, u32 *tag) 51{ 52 if (task->lldd_task) { 53 struct pm8001_ccb_info *ccb; 54 ccb = task->lldd_task; 55 *tag = ccb->ccb_tag; 56 return 1; 57 } 58 return 0; 59} 60 61/** 62 * pm8001_tag_free - free the no more needed tag 63 * @pm8001_ha: our hba struct 64 * @tag: the found tag associated with the task 65 */ 66void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag) 67{ 68 void *bitmap = pm8001_ha->rsvd_tags; 69 unsigned long flags; 70 71 if (tag >= PM8001_RESERVE_SLOT) 72 return; 73 74 spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags); 75 __clear_bit(tag, bitmap); 76 spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags); 77} 78 79/** 80 * pm8001_tag_alloc - allocate a empty tag for task used. 81 * @pm8001_ha: our hba struct 82 * @tag_out: the found empty tag . 83 */ 84int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out) 85{ 86 void *bitmap = pm8001_ha->rsvd_tags; 87 unsigned long flags; 88 unsigned int tag; 89 90 spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags); 91 tag = find_first_zero_bit(bitmap, PM8001_RESERVE_SLOT); 92 if (tag >= PM8001_RESERVE_SLOT) { 93 spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags); 94 return -SAS_QUEUE_FULL; 95 } 96 __set_bit(tag, bitmap); 97 spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags); 98 99 /* reserved tags are in the lower region of the tagset */ 100 *tag_out = tag; 101 return 0; 102} 103 104/** 105 * pm8001_mem_alloc - allocate memory for pm8001. 106 * @pdev: pci device. 107 * @virt_addr: the allocated virtual address 108 * @pphys_addr: DMA address for this device 109 * @pphys_addr_hi: the physical address high byte address. 110 * @pphys_addr_lo: the physical address low byte address. 111 * @mem_size: memory size. 112 * @align: requested byte alignment 113 */ 114int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr, 115 dma_addr_t *pphys_addr, u32 *pphys_addr_hi, 116 u32 *pphys_addr_lo, u32 mem_size, u32 align) 117{ 118 caddr_t mem_virt_alloc; 119 dma_addr_t mem_dma_handle; 120 u64 phys_align; 121 u64 align_offset = 0; 122 if (align) 123 align_offset = (dma_addr_t)align - 1; 124 mem_virt_alloc = dma_alloc_coherent(&pdev->dev, mem_size + align, 125 &mem_dma_handle, GFP_KERNEL); 126 if (!mem_virt_alloc) 127 return -ENOMEM; 128 *pphys_addr = mem_dma_handle; 129 phys_align = (*pphys_addr + align_offset) & ~align_offset; 130 *virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr; 131 *pphys_addr_hi = upper_32_bits(phys_align); 132 *pphys_addr_lo = lower_32_bits(phys_align); 133 return 0; 134} 135 136/** 137 * pm8001_find_ha_by_dev - from domain device which come from sas layer to 138 * find out our hba struct. 139 * @dev: the domain device which from sas layer. 140 */ 141static 142struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev) 143{ 144 struct sas_ha_struct *sha = dev->port->ha; 145 struct pm8001_hba_info *pm8001_ha = sha->lldd_ha; 146 return pm8001_ha; 147} 148 149/** 150 * pm8001_phy_control - this function should be registered to 151 * sas_domain_function_template to provide libsas used, note: this is just 152 * control the HBA phy rather than other expander phy if you want control 153 * other phy, you should use SMP command. 154 * @sas_phy: which phy in HBA phys. 155 * @func: the operation. 156 * @funcdata: always NULL. 157 */ 158int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func, 159 void *funcdata) 160{ 161 int rc = 0, phy_id = sas_phy->id; 162 struct pm8001_hba_info *pm8001_ha = NULL; 163 struct sas_phy_linkrates *rates; 164 struct pm8001_phy *phy; 165 DECLARE_COMPLETION_ONSTACK(completion); 166 unsigned long flags; 167 pm8001_ha = sas_phy->ha->lldd_ha; 168 phy = &pm8001_ha->phy[phy_id]; 169 pm8001_ha->phy[phy_id].enable_completion = &completion; 170 171 if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) { 172 /* 173 * If the controller is in fatal error state, 174 * we will not get a response from the controller 175 */ 176 pm8001_dbg(pm8001_ha, FAIL, 177 "Phy control failed due to fatal errors\n"); 178 return -EFAULT; 179 } 180 181 switch (func) { 182 case PHY_FUNC_SET_LINK_RATE: 183 rates = funcdata; 184 if (rates->minimum_linkrate) { 185 pm8001_ha->phy[phy_id].minimum_linkrate = 186 rates->minimum_linkrate; 187 } 188 if (rates->maximum_linkrate) { 189 pm8001_ha->phy[phy_id].maximum_linkrate = 190 rates->maximum_linkrate; 191 } 192 if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) { 193 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); 194 wait_for_completion(&completion); 195 } 196 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, 197 PHY_LINK_RESET); 198 break; 199 case PHY_FUNC_HARD_RESET: 200 if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) { 201 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); 202 wait_for_completion(&completion); 203 } 204 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, 205 PHY_HARD_RESET); 206 break; 207 case PHY_FUNC_LINK_RESET: 208 if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) { 209 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); 210 wait_for_completion(&completion); 211 } 212 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, 213 PHY_LINK_RESET); 214 break; 215 case PHY_FUNC_RELEASE_SPINUP_HOLD: 216 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, 217 PHY_LINK_RESET); 218 break; 219 case PHY_FUNC_DISABLE: 220 if (pm8001_ha->chip_id != chip_8001) { 221 if (pm8001_ha->phy[phy_id].phy_state == 222 PHY_STATE_LINK_UP_SPCV) { 223 sas_phy_disconnected(&phy->sas_phy); 224 sas_notify_phy_event(&phy->sas_phy, 225 PHYE_LOSS_OF_SIGNAL, GFP_KERNEL); 226 phy->phy_attached = 0; 227 } 228 } else { 229 if (pm8001_ha->phy[phy_id].phy_state == 230 PHY_STATE_LINK_UP_SPC) { 231 sas_phy_disconnected(&phy->sas_phy); 232 sas_notify_phy_event(&phy->sas_phy, 233 PHYE_LOSS_OF_SIGNAL, GFP_KERNEL); 234 phy->phy_attached = 0; 235 } 236 } 237 PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id); 238 break; 239 case PHY_FUNC_GET_EVENTS: 240 spin_lock_irqsave(&pm8001_ha->lock, flags); 241 if (pm8001_ha->chip_id == chip_8001) { 242 if (-1 == pm8001_bar4_shift(pm8001_ha, 243 (phy_id < 4) ? 0x30000 : 0x40000)) { 244 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 245 return -EINVAL; 246 } 247 } 248 { 249 struct sas_phy *phy = sas_phy->phy; 250 u32 __iomem *qp = pm8001_ha->io_mem[2].memvirtaddr 251 + 0x1034 + (0x4000 * (phy_id & 3)); 252 253 phy->invalid_dword_count = readl(qp); 254 phy->running_disparity_error_count = readl(&qp[1]); 255 phy->loss_of_dword_sync_count = readl(&qp[3]); 256 phy->phy_reset_problem_count = readl(&qp[4]); 257 } 258 if (pm8001_ha->chip_id == chip_8001) 259 pm8001_bar4_shift(pm8001_ha, 0); 260 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 261 return 0; 262 default: 263 pm8001_dbg(pm8001_ha, DEVIO, "func 0x%x\n", func); 264 rc = -EOPNOTSUPP; 265 } 266 msleep(300); 267 return rc; 268} 269 270/** 271 * pm8001_scan_start - we should enable all HBA phys by sending the phy_start 272 * command to HBA. 273 * @shost: the scsi host data. 274 */ 275void pm8001_scan_start(struct Scsi_Host *shost) 276{ 277 int i; 278 struct pm8001_hba_info *pm8001_ha; 279 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); 280 DECLARE_COMPLETION_ONSTACK(completion); 281 pm8001_ha = sha->lldd_ha; 282 /* SAS_RE_INITIALIZATION not available in SPCv/ve */ 283 if (pm8001_ha->chip_id == chip_8001) 284 PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha); 285 for (i = 0; i < pm8001_ha->chip->n_phy; ++i) { 286 pm8001_ha->phy[i].enable_completion = &completion; 287 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i); 288 wait_for_completion(&completion); 289 msleep(300); 290 } 291} 292 293int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time) 294{ 295 struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); 296 297 /* give the phy enabling interrupt event time to come in (1s 298 * is empirically about all it takes) */ 299 if (time < HZ) 300 return 0; 301 /* Wait for discovery to finish */ 302 sas_drain_work(ha); 303 return 1; 304} 305 306/** 307 * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task 308 * @pm8001_ha: our hba card information 309 * @ccb: the ccb which attached to smp task 310 */ 311static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha, 312 struct pm8001_ccb_info *ccb) 313{ 314 return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb); 315} 316 317u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag) 318{ 319 struct ata_queued_cmd *qc = task->uldd_task; 320 321 if (qc && ata_is_ncq(qc->tf.protocol)) { 322 *tag = qc->tag; 323 return 1; 324 } 325 326 return 0; 327} 328 329/** 330 * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task 331 * @pm8001_ha: our hba card information 332 * @ccb: the ccb which attached to sata task 333 */ 334static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha, 335 struct pm8001_ccb_info *ccb) 336{ 337 return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb); 338} 339 340/** 341 * pm8001_task_prep_internal_abort - the dispatcher function, prepare data 342 * for internal abort task 343 * @pm8001_ha: our hba card information 344 * @ccb: the ccb which attached to sata task 345 */ 346static int pm8001_task_prep_internal_abort(struct pm8001_hba_info *pm8001_ha, 347 struct pm8001_ccb_info *ccb) 348{ 349 return PM8001_CHIP_DISP->task_abort(pm8001_ha, ccb); 350} 351 352/** 353 * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data 354 * @pm8001_ha: our hba card information 355 * @ccb: the ccb which attached to TM 356 * @tmf: the task management IU 357 */ 358static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha, 359 struct pm8001_ccb_info *ccb, struct sas_tmf_task *tmf) 360{ 361 return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf); 362} 363 364/** 365 * pm8001_task_prep_ssp - the dispatcher function, prepare ssp data for ssp task 366 * @pm8001_ha: our hba card information 367 * @ccb: the ccb which attached to ssp task 368 */ 369static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha, 370 struct pm8001_ccb_info *ccb) 371{ 372 return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb); 373} 374 375 /* Find the local port id that's attached to this device */ 376static int sas_find_local_port_id(struct domain_device *dev) 377{ 378 struct domain_device *pdev = dev->parent; 379 380 /* Directly attached device */ 381 if (!pdev) 382 return dev->port->id; 383 while (pdev) { 384 struct domain_device *pdev_p = pdev->parent; 385 if (!pdev_p) 386 return pdev->port->id; 387 pdev = pdev->parent; 388 } 389 return 0; 390} 391 392#define DEV_IS_GONE(pm8001_dev) \ 393 ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))) 394 395 396static int pm8001_deliver_command(struct pm8001_hba_info *pm8001_ha, 397 struct pm8001_ccb_info *ccb) 398{ 399 struct sas_task *task = ccb->task; 400 enum sas_protocol task_proto = task->task_proto; 401 struct sas_tmf_task *tmf = task->tmf; 402 int is_tmf = !!tmf; 403 404 switch (task_proto) { 405 case SAS_PROTOCOL_SMP: 406 return pm8001_task_prep_smp(pm8001_ha, ccb); 407 case SAS_PROTOCOL_SSP: 408 if (is_tmf) 409 return pm8001_task_prep_ssp_tm(pm8001_ha, ccb, tmf); 410 return pm8001_task_prep_ssp(pm8001_ha, ccb); 411 case SAS_PROTOCOL_SATA: 412 case SAS_PROTOCOL_STP: 413 return pm8001_task_prep_ata(pm8001_ha, ccb); 414 case SAS_PROTOCOL_INTERNAL_ABORT: 415 return pm8001_task_prep_internal_abort(pm8001_ha, ccb); 416 default: 417 dev_err(pm8001_ha->dev, "unknown sas_task proto: 0x%x\n", 418 task_proto); 419 } 420 421 return -EINVAL; 422} 423 424/** 425 * pm8001_queue_command - register for upper layer used, all IO commands sent 426 * to HBA are from this interface. 427 * @task: the task to be execute. 428 * @gfp_flags: gfp_flags 429 */ 430int pm8001_queue_command(struct sas_task *task, gfp_t gfp_flags) 431{ 432 struct task_status_struct *ts = &task->task_status; 433 enum sas_protocol task_proto = task->task_proto; 434 struct domain_device *dev = task->dev; 435 struct pm8001_device *pm8001_dev = dev->lldd_dev; 436 bool internal_abort = sas_is_internal_abort(task); 437 struct pm8001_hba_info *pm8001_ha; 438 struct pm8001_port *port = NULL; 439 struct pm8001_ccb_info *ccb; 440 unsigned long flags; 441 u32 n_elem = 0; 442 int rc = 0; 443 444 if (!internal_abort && !dev->port) { 445 ts->resp = SAS_TASK_UNDELIVERED; 446 ts->stat = SAS_PHY_DOWN; 447 if (dev->dev_type != SAS_SATA_DEV) 448 task->task_done(task); 449 return 0; 450 } 451 452 pm8001_ha = pm8001_find_ha_by_dev(dev); 453 if (pm8001_ha->controller_fatal_error) { 454 ts->resp = SAS_TASK_UNDELIVERED; 455 task->task_done(task); 456 return 0; 457 } 458 459 pm8001_dbg(pm8001_ha, IO, "pm8001_task_exec device\n"); 460 461 spin_lock_irqsave(&pm8001_ha->lock, flags); 462 463 pm8001_dev = dev->lldd_dev; 464 port = &pm8001_ha->port[sas_find_local_port_id(dev)]; 465 466 if (!internal_abort && 467 (DEV_IS_GONE(pm8001_dev) || !port->port_attached)) { 468 ts->resp = SAS_TASK_UNDELIVERED; 469 ts->stat = SAS_PHY_DOWN; 470 if (sas_protocol_ata(task_proto)) { 471 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 472 task->task_done(task); 473 spin_lock_irqsave(&pm8001_ha->lock, flags); 474 } else { 475 task->task_done(task); 476 } 477 rc = -ENODEV; 478 goto err_out; 479 } 480 481 ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_dev, task); 482 if (!ccb) { 483 rc = -SAS_QUEUE_FULL; 484 goto err_out; 485 } 486 487 if (!sas_protocol_ata(task_proto)) { 488 if (task->num_scatter) { 489 n_elem = dma_map_sg(pm8001_ha->dev, task->scatter, 490 task->num_scatter, task->data_dir); 491 if (!n_elem) { 492 rc = -ENOMEM; 493 goto err_out_ccb; 494 } 495 } 496 } else { 497 n_elem = task->num_scatter; 498 } 499 500 task->lldd_task = ccb; 501 ccb->n_elem = n_elem; 502 503 atomic_inc(&pm8001_dev->running_req); 504 505 rc = pm8001_deliver_command(pm8001_ha, ccb); 506 if (rc) { 507 atomic_dec(&pm8001_dev->running_req); 508 if (!sas_protocol_ata(task_proto) && n_elem) 509 dma_unmap_sg(pm8001_ha->dev, task->scatter, 510 task->num_scatter, task->data_dir); 511err_out_ccb: 512 pm8001_ccb_free(pm8001_ha, ccb); 513 514err_out: 515 pm8001_dbg(pm8001_ha, IO, "pm8001_task_exec failed[%d]!\n", rc); 516 } 517 518 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 519 520 return rc; 521} 522 523/** 524 * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb. 525 * @pm8001_ha: our hba card information 526 * @ccb: the ccb which attached to ssp task to free 527 */ 528void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha, 529 struct pm8001_ccb_info *ccb) 530{ 531 struct sas_task *task = ccb->task; 532 struct ata_queued_cmd *qc; 533 struct pm8001_device *pm8001_dev; 534 535 if (!task) 536 return; 537 538 if (!sas_protocol_ata(task->task_proto) && ccb->n_elem) 539 dma_unmap_sg(pm8001_ha->dev, task->scatter, 540 task->num_scatter, task->data_dir); 541 542 switch (task->task_proto) { 543 case SAS_PROTOCOL_SMP: 544 dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1, 545 DMA_FROM_DEVICE); 546 dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1, 547 DMA_TO_DEVICE); 548 break; 549 550 case SAS_PROTOCOL_SATA: 551 case SAS_PROTOCOL_STP: 552 case SAS_PROTOCOL_SSP: 553 default: 554 /* do nothing */ 555 break; 556 } 557 558 if (sas_protocol_ata(task->task_proto)) { 559 /* For SCSI/ATA commands uldd_task points to ata_queued_cmd */ 560 qc = task->uldd_task; 561 pm8001_dev = ccb->device; 562 trace_pm80xx_request_complete(pm8001_ha->id, 563 pm8001_dev ? pm8001_dev->attached_phy : PM8001_MAX_PHYS, 564 ccb->ccb_tag, 0 /* ctlr_opcode not known */, 565 qc ? qc->tf.command : 0, // ata opcode 566 pm8001_dev ? atomic_read(&pm8001_dev->running_req) : -1); 567 } 568 569 task->lldd_task = NULL; 570 pm8001_ccb_free(pm8001_ha, ccb); 571} 572 573/** 574 * pm8001_alloc_dev - find a empty pm8001_device 575 * @pm8001_ha: our hba card information 576 */ 577static struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha) 578{ 579 u32 dev; 580 for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) { 581 if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) { 582 pm8001_ha->devices[dev].id = dev; 583 return &pm8001_ha->devices[dev]; 584 } 585 } 586 if (dev == PM8001_MAX_DEVICES) { 587 pm8001_dbg(pm8001_ha, FAIL, 588 "max support %d devices, ignore ..\n", 589 PM8001_MAX_DEVICES); 590 } 591 return NULL; 592} 593/** 594 * pm8001_find_dev - find a matching pm8001_device 595 * @pm8001_ha: our hba card information 596 * @device_id: device ID to match against 597 */ 598struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha, 599 u32 device_id) 600{ 601 u32 dev; 602 for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) { 603 if (pm8001_ha->devices[dev].device_id == device_id) 604 return &pm8001_ha->devices[dev]; 605 } 606 if (dev == PM8001_MAX_DEVICES) { 607 pm8001_dbg(pm8001_ha, FAIL, "NO MATCHING DEVICE FOUND !!!\n"); 608 } 609 return NULL; 610} 611 612void pm8001_free_dev(struct pm8001_device *pm8001_dev) 613{ 614 u32 id = pm8001_dev->id; 615 memset(pm8001_dev, 0, sizeof(*pm8001_dev)); 616 pm8001_dev->id = id; 617 pm8001_dev->dev_type = SAS_PHY_UNUSED; 618 pm8001_dev->device_id = PM8001_MAX_DEVICES; 619 pm8001_dev->sas_device = NULL; 620} 621 622/** 623 * pm8001_dev_found_notify - libsas notify a device is found. 624 * @dev: the device structure which sas layer used. 625 * 626 * when libsas find a sas domain device, it should tell the LLDD that 627 * device is found, and then LLDD register this device to HBA firmware 628 * by the command "OPC_INB_REG_DEV", after that the HBA will assign a 629 * device ID(according to device's sas address) and returned it to LLDD. From 630 * now on, we communicate with HBA FW with the device ID which HBA assigned 631 * rather than sas address. it is the necessary step for our HBA but it is 632 * the optional for other HBA driver. 633 */ 634static int pm8001_dev_found_notify(struct domain_device *dev) 635{ 636 unsigned long flags = 0; 637 int res = 0; 638 struct pm8001_hba_info *pm8001_ha = NULL; 639 struct domain_device *parent_dev = dev->parent; 640 struct pm8001_device *pm8001_device; 641 DECLARE_COMPLETION_ONSTACK(completion); 642 u32 flag = 0; 643 pm8001_ha = pm8001_find_ha_by_dev(dev); 644 spin_lock_irqsave(&pm8001_ha->lock, flags); 645 646 pm8001_device = pm8001_alloc_dev(pm8001_ha); 647 if (!pm8001_device) { 648 res = -1; 649 goto found_out; 650 } 651 pm8001_device->sas_device = dev; 652 dev->lldd_dev = pm8001_device; 653 pm8001_device->dev_type = dev->dev_type; 654 pm8001_device->dcompletion = &completion; 655 if (parent_dev && dev_is_expander(parent_dev->dev_type)) { 656 int phy_id; 657 658 phy_id = sas_find_attached_phy_id(&parent_dev->ex_dev, dev); 659 if (phy_id < 0) { 660 pm8001_dbg(pm8001_ha, FAIL, 661 "Error: no attached dev:%016llx at ex:%016llx.\n", 662 SAS_ADDR(dev->sas_addr), 663 SAS_ADDR(parent_dev->sas_addr)); 664 res = phy_id; 665 } else { 666 pm8001_device->attached_phy = phy_id; 667 } 668 } else { 669 if (dev->dev_type == SAS_SATA_DEV) { 670 pm8001_device->attached_phy = 671 dev->rphy->identify.phy_identifier; 672 flag = 1; /* directly sata */ 673 } 674 } /*register this device to HBA*/ 675 pm8001_dbg(pm8001_ha, DISC, "Found device\n"); 676 PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag); 677 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 678 wait_for_completion(&completion); 679 if (dev->dev_type == SAS_END_DEVICE) 680 msleep(50); 681 pm8001_ha->flags = PM8001F_RUN_TIME; 682 return 0; 683found_out: 684 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 685 return res; 686} 687 688int pm8001_dev_found(struct domain_device *dev) 689{ 690 return pm8001_dev_found_notify(dev); 691} 692 693#define PM8001_TASK_TIMEOUT 20 694 695/** 696 * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify" 697 * @dev: the device structure which sas layer used. 698 */ 699static void pm8001_dev_gone_notify(struct domain_device *dev) 700{ 701 unsigned long flags = 0; 702 struct pm8001_hba_info *pm8001_ha; 703 struct pm8001_device *pm8001_dev = dev->lldd_dev; 704 705 pm8001_ha = pm8001_find_ha_by_dev(dev); 706 spin_lock_irqsave(&pm8001_ha->lock, flags); 707 if (pm8001_dev) { 708 u32 device_id = pm8001_dev->device_id; 709 710 pm8001_dbg(pm8001_ha, DISC, "found dev[%d:%x] is gone.\n", 711 pm8001_dev->device_id, pm8001_dev->dev_type); 712 if (atomic_read(&pm8001_dev->running_req)) { 713 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 714 sas_execute_internal_abort_dev(dev, 0, NULL); 715 while (atomic_read(&pm8001_dev->running_req)) 716 msleep(20); 717 spin_lock_irqsave(&pm8001_ha->lock, flags); 718 } 719 PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id); 720 pm8001_free_dev(pm8001_dev); 721 } else { 722 pm8001_dbg(pm8001_ha, DISC, "Found dev has gone.\n"); 723 } 724 dev->lldd_dev = NULL; 725 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 726} 727 728void pm8001_dev_gone(struct domain_device *dev) 729{ 730 pm8001_dev_gone_notify(dev); 731} 732 733/* retry commands by ha, by task and/or by device */ 734void pm8001_open_reject_retry( 735 struct pm8001_hba_info *pm8001_ha, 736 struct sas_task *task_to_close, 737 struct pm8001_device *device_to_close) 738{ 739 int i; 740 unsigned long flags; 741 742 if (pm8001_ha == NULL) 743 return; 744 745 spin_lock_irqsave(&pm8001_ha->lock, flags); 746 747 for (i = 0; i < PM8001_MAX_CCB; i++) { 748 struct sas_task *task; 749 struct task_status_struct *ts; 750 struct pm8001_device *pm8001_dev; 751 unsigned long flags1; 752 struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i]; 753 754 if (ccb->ccb_tag == PM8001_INVALID_TAG) 755 continue; 756 757 pm8001_dev = ccb->device; 758 if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)) 759 continue; 760 if (!device_to_close) { 761 uintptr_t d = (uintptr_t)pm8001_dev 762 - (uintptr_t)&pm8001_ha->devices; 763 if (((d % sizeof(*pm8001_dev)) != 0) 764 || ((d / sizeof(*pm8001_dev)) >= PM8001_MAX_DEVICES)) 765 continue; 766 } else if (pm8001_dev != device_to_close) 767 continue; 768 task = ccb->task; 769 if (!task || !task->task_done) 770 continue; 771 if (task_to_close && (task != task_to_close)) 772 continue; 773 ts = &task->task_status; 774 ts->resp = SAS_TASK_COMPLETE; 775 /* Force the midlayer to retry */ 776 ts->stat = SAS_OPEN_REJECT; 777 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; 778 if (pm8001_dev) 779 atomic_dec(&pm8001_dev->running_req); 780 spin_lock_irqsave(&task->task_state_lock, flags1); 781 task->task_state_flags &= ~SAS_TASK_STATE_PENDING; 782 task->task_state_flags |= SAS_TASK_STATE_DONE; 783 if (unlikely((task->task_state_flags 784 & SAS_TASK_STATE_ABORTED))) { 785 spin_unlock_irqrestore(&task->task_state_lock, 786 flags1); 787 pm8001_ccb_task_free(pm8001_ha, ccb); 788 } else { 789 spin_unlock_irqrestore(&task->task_state_lock, 790 flags1); 791 pm8001_ccb_task_free(pm8001_ha, ccb); 792 mb();/* in order to force CPU ordering */ 793 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 794 task->task_done(task); 795 spin_lock_irqsave(&pm8001_ha->lock, flags); 796 } 797 } 798 799 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 800} 801 802/** 803 * pm8001_I_T_nexus_reset() - reset the initiator/target connection 804 * @dev: the device structure for the device to reset. 805 * 806 * Standard mandates link reset for ATA (type 0) and hard reset for 807 * SSP (type 1), only for RECOVERY 808 */ 809int pm8001_I_T_nexus_reset(struct domain_device *dev) 810{ 811 int rc = TMF_RESP_FUNC_FAILED; 812 struct pm8001_device *pm8001_dev; 813 struct pm8001_hba_info *pm8001_ha; 814 struct sas_phy *phy; 815 816 if (!dev || !dev->lldd_dev) 817 return -ENODEV; 818 819 pm8001_dev = dev->lldd_dev; 820 pm8001_ha = pm8001_find_ha_by_dev(dev); 821 phy = sas_get_local_phy(dev); 822 823 if (dev_is_sata(dev)) { 824 if (scsi_is_sas_phy_local(phy)) { 825 rc = 0; 826 goto out; 827 } 828 rc = sas_phy_reset(phy, 1); 829 if (rc) { 830 pm8001_dbg(pm8001_ha, EH, 831 "phy reset failed for device %x\n" 832 "with rc %d\n", pm8001_dev->device_id, rc); 833 rc = TMF_RESP_FUNC_FAILED; 834 goto out; 835 } 836 msleep(2000); 837 rc = sas_execute_internal_abort_dev(dev, 0, NULL); 838 if (rc) { 839 pm8001_dbg(pm8001_ha, EH, "task abort failed %x\n" 840 "with rc %d\n", pm8001_dev->device_id, rc); 841 rc = TMF_RESP_FUNC_FAILED; 842 } 843 } else { 844 rc = sas_phy_reset(phy, 1); 845 msleep(2000); 846 } 847 pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n", 848 pm8001_dev->device_id, rc); 849 out: 850 sas_put_local_phy(phy); 851 return rc; 852} 853 854/* 855* This function handle the IT_NEXUS_XXX event or completion 856* status code for SSP/SATA/SMP I/O request. 857*/ 858int pm8001_I_T_nexus_event_handler(struct domain_device *dev) 859{ 860 int rc = TMF_RESP_FUNC_FAILED; 861 struct pm8001_device *pm8001_dev; 862 struct pm8001_hba_info *pm8001_ha; 863 struct sas_phy *phy; 864 865 if (!dev || !dev->lldd_dev) 866 return -1; 867 868 pm8001_dev = dev->lldd_dev; 869 pm8001_ha = pm8001_find_ha_by_dev(dev); 870 871 pm8001_dbg(pm8001_ha, EH, "I_T_Nexus handler invoked !!\n"); 872 873 phy = sas_get_local_phy(dev); 874 875 if (dev_is_sata(dev)) { 876 DECLARE_COMPLETION_ONSTACK(completion_setstate); 877 if (scsi_is_sas_phy_local(phy)) { 878 rc = 0; 879 goto out; 880 } 881 /* send internal ssp/sata/smp abort command to FW */ 882 sas_execute_internal_abort_dev(dev, 0, NULL); 883 msleep(100); 884 885 /* deregister the target device */ 886 pm8001_dev_gone_notify(dev); 887 msleep(200); 888 889 /*send phy reset to hard reset target */ 890 rc = sas_phy_reset(phy, 1); 891 msleep(2000); 892 pm8001_dev->setds_completion = &completion_setstate; 893 894 wait_for_completion(&completion_setstate); 895 } else { 896 /* send internal ssp/sata/smp abort command to FW */ 897 sas_execute_internal_abort_dev(dev, 0, NULL); 898 msleep(100); 899 900 /* deregister the target device */ 901 pm8001_dev_gone_notify(dev); 902 msleep(200); 903 904 /*send phy reset to hard reset target */ 905 rc = sas_phy_reset(phy, 1); 906 msleep(2000); 907 } 908 pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n", 909 pm8001_dev->device_id, rc); 910out: 911 sas_put_local_phy(phy); 912 913 return rc; 914} 915/* mandatory SAM-3, the task reset the specified LUN*/ 916int pm8001_lu_reset(struct domain_device *dev, u8 *lun) 917{ 918 int rc = TMF_RESP_FUNC_FAILED; 919 struct pm8001_device *pm8001_dev = dev->lldd_dev; 920 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); 921 DECLARE_COMPLETION_ONSTACK(completion_setstate); 922 923 if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) { 924 /* 925 * If the controller is in fatal error state, 926 * we will not get a response from the controller 927 */ 928 pm8001_dbg(pm8001_ha, FAIL, 929 "LUN reset failed due to fatal errors\n"); 930 return rc; 931 } 932 933 if (dev_is_sata(dev)) { 934 struct sas_phy *phy = sas_get_local_phy(dev); 935 sas_execute_internal_abort_dev(dev, 0, NULL); 936 rc = sas_phy_reset(phy, 1); 937 sas_put_local_phy(phy); 938 pm8001_dev->setds_completion = &completion_setstate; 939 rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, 940 pm8001_dev, DS_OPERATIONAL); 941 wait_for_completion(&completion_setstate); 942 } else { 943 rc = sas_lu_reset(dev, lun); 944 } 945 /* If failed, fall-through I_T_Nexus reset */ 946 pm8001_dbg(pm8001_ha, EH, "for device[%x]:rc=%d\n", 947 pm8001_dev->device_id, rc); 948 return rc; 949} 950 951/* optional SAM-3 */ 952int pm8001_query_task(struct sas_task *task) 953{ 954 u32 tag = 0xdeadbeef; 955 int rc = TMF_RESP_FUNC_FAILED; 956 if (unlikely(!task || !task->lldd_task || !task->dev)) 957 return rc; 958 959 if (task->task_proto & SAS_PROTOCOL_SSP) { 960 struct scsi_cmnd *cmnd = task->uldd_task; 961 struct domain_device *dev = task->dev; 962 struct pm8001_hba_info *pm8001_ha = 963 pm8001_find_ha_by_dev(dev); 964 965 rc = pm8001_find_tag(task, &tag); 966 if (rc == 0) { 967 rc = TMF_RESP_FUNC_FAILED; 968 return rc; 969 } 970 pm8001_dbg(pm8001_ha, EH, "Query:[%16ph]\n", cmnd->cmnd); 971 972 rc = sas_query_task(task, tag); 973 switch (rc) { 974 /* The task is still in Lun, release it then */ 975 case TMF_RESP_FUNC_SUCC: 976 pm8001_dbg(pm8001_ha, EH, 977 "The task is still in Lun\n"); 978 break; 979 /* The task is not in Lun or failed, reset the phy */ 980 case TMF_RESP_FUNC_FAILED: 981 case TMF_RESP_FUNC_COMPLETE: 982 pm8001_dbg(pm8001_ha, EH, 983 "The task is not in Lun or failed, reset the phy\n"); 984 break; 985 } 986 } 987 pr_err("pm80xx: rc= %d\n", rc); 988 return rc; 989} 990 991/* mandatory SAM-3, still need free task/ccb info, abort the specified task */ 992int pm8001_abort_task(struct sas_task *task) 993{ 994 struct pm8001_ccb_info *ccb = task->lldd_task; 995 unsigned long flags; 996 u32 tag; 997 struct domain_device *dev ; 998 struct pm8001_hba_info *pm8001_ha; 999 struct pm8001_device *pm8001_dev; 1000 int rc = TMF_RESP_FUNC_FAILED, ret; 1001 u32 phy_id, port_id; 1002 struct sas_task_slow slow_task; 1003 1004 if (!task->lldd_task || !task->dev) 1005 return TMF_RESP_FUNC_FAILED; 1006 1007 dev = task->dev; 1008 pm8001_dev = dev->lldd_dev; 1009 pm8001_ha = pm8001_find_ha_by_dev(dev); 1010 phy_id = pm8001_dev->attached_phy; 1011 1012 if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) { 1013 // If the controller is seeing fatal errors 1014 // abort task will not get a response from the controller 1015 return TMF_RESP_FUNC_FAILED; 1016 } 1017 1018 ret = pm8001_find_tag(task, &tag); 1019 if (ret == 0) { 1020 pm8001_info(pm8001_ha, "no tag for task:%p\n", task); 1021 return TMF_RESP_FUNC_FAILED; 1022 } 1023 spin_lock_irqsave(&task->task_state_lock, flags); 1024 if (task->task_state_flags & SAS_TASK_STATE_DONE) { 1025 spin_unlock_irqrestore(&task->task_state_lock, flags); 1026 return TMF_RESP_FUNC_COMPLETE; 1027 } 1028 task->task_state_flags |= SAS_TASK_STATE_ABORTED; 1029 if (task->slow_task == NULL) { 1030 init_completion(&slow_task.completion); 1031 task->slow_task = &slow_task; 1032 } 1033 spin_unlock_irqrestore(&task->task_state_lock, flags); 1034 if (task->task_proto & SAS_PROTOCOL_SSP) { 1035 rc = sas_abort_task(task, tag); 1036 sas_execute_internal_abort_single(dev, tag, 0, NULL); 1037 } else if (task->task_proto & SAS_PROTOCOL_SATA || 1038 task->task_proto & SAS_PROTOCOL_STP) { 1039 if (pm8001_ha->chip_id == chip_8006) { 1040 DECLARE_COMPLETION_ONSTACK(completion_reset); 1041 DECLARE_COMPLETION_ONSTACK(completion); 1042 struct pm8001_phy *phy = pm8001_ha->phy + phy_id; 1043 port_id = phy->port->port_id; 1044 1045 /* 1. Set Device state as Recovery */ 1046 pm8001_dev->setds_completion = &completion; 1047 PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, 1048 pm8001_dev, DS_IN_RECOVERY); 1049 wait_for_completion(&completion); 1050 1051 /* 2. Send Phy Control Hard Reset */ 1052 reinit_completion(&completion); 1053 phy->port_reset_status = PORT_RESET_TMO; 1054 phy->reset_success = false; 1055 phy->enable_completion = &completion; 1056 phy->reset_completion = &completion_reset; 1057 ret = PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, 1058 PHY_HARD_RESET); 1059 if (ret) { 1060 phy->enable_completion = NULL; 1061 phy->reset_completion = NULL; 1062 goto out; 1063 } 1064 1065 /* In the case of the reset timeout/fail we still 1066 * abort the command at the firmware. The assumption 1067 * here is that the drive is off doing something so 1068 * that it's not processing requests, and we want to 1069 * avoid getting a completion for this and either 1070 * leaking the task in libsas or losing the race and 1071 * getting a double free. 1072 */ 1073 pm8001_dbg(pm8001_ha, MSG, 1074 "Waiting for local phy ctl\n"); 1075 ret = wait_for_completion_timeout(&completion, 1076 PM8001_TASK_TIMEOUT * HZ); 1077 if (!ret || !phy->reset_success) { 1078 phy->enable_completion = NULL; 1079 phy->reset_completion = NULL; 1080 } else { 1081 /* 3. Wait for Port Reset complete or 1082 * Port reset TMO 1083 */ 1084 pm8001_dbg(pm8001_ha, MSG, 1085 "Waiting for Port reset\n"); 1086 ret = wait_for_completion_timeout( 1087 &completion_reset, 1088 PM8001_TASK_TIMEOUT * HZ); 1089 if (!ret) 1090 phy->reset_completion = NULL; 1091 WARN_ON(phy->port_reset_status == 1092 PORT_RESET_TMO); 1093 if (phy->port_reset_status == PORT_RESET_TMO) { 1094 pm8001_dev_gone_notify(dev); 1095 PM8001_CHIP_DISP->hw_event_ack_req( 1096 pm8001_ha, 0, 1097 0x07, /*HW_EVENT_PHY_DOWN ack*/ 1098 port_id, phy_id, 0, 0); 1099 goto out; 1100 } 1101 } 1102 1103 /* 1104 * 4. SATA Abort ALL 1105 * we wait for the task to be aborted so that the task 1106 * is removed from the ccb. on success the caller is 1107 * going to free the task. 1108 */ 1109 ret = sas_execute_internal_abort_dev(dev, 0, NULL); 1110 if (ret) 1111 goto out; 1112 ret = wait_for_completion_timeout( 1113 &task->slow_task->completion, 1114 PM8001_TASK_TIMEOUT * HZ); 1115 if (!ret) 1116 goto out; 1117 1118 /* 5. Set Device State as Operational */ 1119 reinit_completion(&completion); 1120 pm8001_dev->setds_completion = &completion; 1121 PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, 1122 pm8001_dev, DS_OPERATIONAL); 1123 wait_for_completion(&completion); 1124 } else { 1125 /* 1126 * Ensure that if we see a completion for the ccb 1127 * associated with the task which we are trying to 1128 * abort then we should not touch the sas_task as it 1129 * may race with libsas freeing it when return here. 1130 */ 1131 ccb->task = NULL; 1132 ret = sas_execute_internal_abort_single(dev, tag, 0, NULL); 1133 } 1134 rc = TMF_RESP_FUNC_COMPLETE; 1135 } else if (task->task_proto & SAS_PROTOCOL_SMP) { 1136 /* SMP */ 1137 rc = sas_execute_internal_abort_single(dev, tag, 0, NULL); 1138 1139 } 1140out: 1141 spin_lock_irqsave(&task->task_state_lock, flags); 1142 if (task->slow_task == &slow_task) 1143 task->slow_task = NULL; 1144 spin_unlock_irqrestore(&task->task_state_lock, flags); 1145 if (rc != TMF_RESP_FUNC_COMPLETE) 1146 pm8001_info(pm8001_ha, "rc= %d\n", rc); 1147 return rc; 1148} 1149 1150int pm8001_clear_task_set(struct domain_device *dev, u8 *lun) 1151{ 1152 struct pm8001_device *pm8001_dev = dev->lldd_dev; 1153 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); 1154 1155 pm8001_dbg(pm8001_ha, EH, "I_T_L_Q clear task set[%x]\n", 1156 pm8001_dev->device_id); 1157 return sas_clear_task_set(dev, lun); 1158} 1159 1160void pm8001_port_formed(struct asd_sas_phy *sas_phy) 1161{ 1162 struct sas_ha_struct *sas_ha = sas_phy->ha; 1163 struct pm8001_hba_info *pm8001_ha = sas_ha->lldd_ha; 1164 struct pm8001_phy *phy = sas_phy->lldd_phy; 1165 struct asd_sas_port *sas_port = sas_phy->port; 1166 struct pm8001_port *port = phy->port; 1167 1168 if (!sas_port) { 1169 pm8001_dbg(pm8001_ha, FAIL, "Received null port\n"); 1170 return; 1171 } 1172 sas_port->lldd_port = port; 1173} 1174 1175void pm8001_setds_completion(struct domain_device *dev) 1176{ 1177 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); 1178 struct pm8001_device *pm8001_dev = dev->lldd_dev; 1179 DECLARE_COMPLETION_ONSTACK(completion_setstate); 1180 1181 if (pm8001_ha->chip_id != chip_8001) { 1182 pm8001_dev->setds_completion = &completion_setstate; 1183 PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, 1184 pm8001_dev, DS_OPERATIONAL); 1185 wait_for_completion(&completion_setstate); 1186 } 1187} 1188 1189void pm8001_tmf_aborted(struct sas_task *task) 1190{ 1191 struct pm8001_ccb_info *ccb = task->lldd_task; 1192 1193 if (ccb) 1194 ccb->task = NULL; 1195} 1196