1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * An i2c driver for the Xicor/Intersil X1205 RTC 4 * Copyright 2004 Karen Spearel 5 * Copyright 2005 Alessandro Zummo 6 * 7 * please send all reports to: 8 * Karen Spearel <kas111 at gmail dot com> 9 * Alessandro Zummo <a.zummo@towertech.it> 10 * 11 * based on a lot of other RTC drivers. 12 * 13 * Information and datasheet: 14 * http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html 15 */ 16 17#include <linux/i2c.h> 18#include <linux/bcd.h> 19#include <linux/rtc.h> 20#include <linux/delay.h> 21#include <linux/module.h> 22#include <linux/bitops.h> 23 24/* offsets into CCR area */ 25 26#define CCR_SEC 0 27#define CCR_MIN 1 28#define CCR_HOUR 2 29#define CCR_MDAY 3 30#define CCR_MONTH 4 31#define CCR_YEAR 5 32#define CCR_WDAY 6 33#define CCR_Y2K 7 34 35#define X1205_REG_SR 0x3F /* status register */ 36#define X1205_REG_Y2K 0x37 37#define X1205_REG_DW 0x36 38#define X1205_REG_YR 0x35 39#define X1205_REG_MO 0x34 40#define X1205_REG_DT 0x33 41#define X1205_REG_HR 0x32 42#define X1205_REG_MN 0x31 43#define X1205_REG_SC 0x30 44#define X1205_REG_DTR 0x13 45#define X1205_REG_ATR 0x12 46#define X1205_REG_INT 0x11 47#define X1205_REG_0 0x10 48#define X1205_REG_Y2K1 0x0F 49#define X1205_REG_DWA1 0x0E 50#define X1205_REG_YRA1 0x0D 51#define X1205_REG_MOA1 0x0C 52#define X1205_REG_DTA1 0x0B 53#define X1205_REG_HRA1 0x0A 54#define X1205_REG_MNA1 0x09 55#define X1205_REG_SCA1 0x08 56#define X1205_REG_Y2K0 0x07 57#define X1205_REG_DWA0 0x06 58#define X1205_REG_YRA0 0x05 59#define X1205_REG_MOA0 0x04 60#define X1205_REG_DTA0 0x03 61#define X1205_REG_HRA0 0x02 62#define X1205_REG_MNA0 0x01 63#define X1205_REG_SCA0 0x00 64 65#define X1205_CCR_BASE 0x30 /* Base address of CCR */ 66#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */ 67 68#define X1205_SR_RTCF 0x01 /* Clock failure */ 69#define X1205_SR_WEL 0x02 /* Write Enable Latch */ 70#define X1205_SR_RWEL 0x04 /* Register Write Enable */ 71#define X1205_SR_AL0 0x20 /* Alarm 0 match */ 72 73#define X1205_DTR_DTR0 0x01 74#define X1205_DTR_DTR1 0x02 75#define X1205_DTR_DTR2 0x04 76 77#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */ 78 79#define X1205_INT_AL0E 0x20 /* Alarm 0 enable */ 80 81static struct i2c_driver x1205_driver; 82 83/* 84 * In the routines that deal directly with the x1205 hardware, we use 85 * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch 86 * Epoch is initialized as 2000. Time is set to UTC. 87 */ 88static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, 89 unsigned char reg_base) 90{ 91 unsigned char dt_addr[2] = { 0, reg_base }; 92 unsigned char buf[8]; 93 int i; 94 95 struct i2c_msg msgs[] = { 96 {/* setup read ptr */ 97 .addr = client->addr, 98 .len = 2, 99 .buf = dt_addr 100 }, 101 {/* read date */ 102 .addr = client->addr, 103 .flags = I2C_M_RD, 104 .len = 8, 105 .buf = buf 106 }, 107 }; 108 109 /* read date registers */ 110 if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { 111 dev_err(&client->dev, "%s: read error\n", __func__); 112 return -EIO; 113 } 114 115 dev_dbg(&client->dev, 116 "%s: raw read data - sec=%02x, min=%02x, hr=%02x, " 117 "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n", 118 __func__, 119 buf[0], buf[1], buf[2], buf[3], 120 buf[4], buf[5], buf[6], buf[7]); 121 122 /* Mask out the enable bits if these are alarm registers */ 123 if (reg_base < X1205_CCR_BASE) 124 for (i = 0; i <= 4; i++) 125 buf[i] &= 0x7F; 126 127 tm->tm_sec = bcd2bin(buf[CCR_SEC]); 128 tm->tm_min = bcd2bin(buf[CCR_MIN]); 129 tm->tm_hour = bcd2bin(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */ 130 tm->tm_mday = bcd2bin(buf[CCR_MDAY]); 131 tm->tm_mon = bcd2bin(buf[CCR_MONTH]) - 1; /* mon is 0-11 */ 132 tm->tm_year = bcd2bin(buf[CCR_YEAR]) 133 + (bcd2bin(buf[CCR_Y2K]) * 100) - 1900; 134 tm->tm_wday = buf[CCR_WDAY]; 135 136 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " 137 "mday=%d, mon=%d, year=%d, wday=%d\n", 138 __func__, 139 tm->tm_sec, tm->tm_min, tm->tm_hour, 140 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); 141 142 return 0; 143} 144 145static int x1205_get_status(struct i2c_client *client, unsigned char *sr) 146{ 147 static unsigned char sr_addr[2] = { 0, X1205_REG_SR }; 148 149 struct i2c_msg msgs[] = { 150 { /* setup read ptr */ 151 .addr = client->addr, 152 .len = 2, 153 .buf = sr_addr 154 }, 155 { /* read status */ 156 .addr = client->addr, 157 .flags = I2C_M_RD, 158 .len = 1, 159 .buf = sr 160 }, 161 }; 162 163 /* read status register */ 164 if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { 165 dev_err(&client->dev, "%s: read error\n", __func__); 166 return -EIO; 167 } 168 169 return 0; 170} 171 172static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, 173 u8 reg_base, unsigned char alm_enable) 174{ 175 int i, xfer; 176 unsigned char rdata[10] = { 0, reg_base }; 177 unsigned char *buf = rdata + 2; 178 179 static const unsigned char wel[3] = { 0, X1205_REG_SR, 180 X1205_SR_WEL }; 181 182 static const unsigned char rwel[3] = { 0, X1205_REG_SR, 183 X1205_SR_WEL | X1205_SR_RWEL }; 184 185 static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 }; 186 187 dev_dbg(&client->dev, 188 "%s: sec=%d min=%d hour=%d mday=%d mon=%d year=%d wday=%d\n", 189 __func__, tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday, 190 tm->tm_mon, tm->tm_year, tm->tm_wday); 191 192 buf[CCR_SEC] = bin2bcd(tm->tm_sec); 193 buf[CCR_MIN] = bin2bcd(tm->tm_min); 194 195 /* set hour and 24hr bit */ 196 buf[CCR_HOUR] = bin2bcd(tm->tm_hour) | X1205_HR_MIL; 197 198 buf[CCR_MDAY] = bin2bcd(tm->tm_mday); 199 200 /* month, 1 - 12 */ 201 buf[CCR_MONTH] = bin2bcd(tm->tm_mon + 1); 202 203 /* year, since the rtc epoch*/ 204 buf[CCR_YEAR] = bin2bcd(tm->tm_year % 100); 205 buf[CCR_WDAY] = tm->tm_wday & 0x07; 206 buf[CCR_Y2K] = bin2bcd((tm->tm_year + 1900) / 100); 207 208 /* If writing alarm registers, set compare bits on registers 0-4 */ 209 if (reg_base < X1205_CCR_BASE) 210 for (i = 0; i <= 4; i++) 211 buf[i] |= 0x80; 212 213 /* this sequence is required to unlock the chip */ 214 xfer = i2c_master_send(client, wel, 3); 215 if (xfer != 3) { 216 dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer); 217 return -EIO; 218 } 219 220 xfer = i2c_master_send(client, rwel, 3); 221 if (xfer != 3) { 222 dev_err(&client->dev, "%s: rwel - %d\n", __func__, xfer); 223 return -EIO; 224 } 225 226 xfer = i2c_master_send(client, rdata, sizeof(rdata)); 227 if (xfer != sizeof(rdata)) { 228 dev_err(&client->dev, 229 "%s: result=%d addr=%02x, data=%02x\n", 230 __func__, 231 xfer, rdata[1], rdata[2]); 232 return -EIO; 233 } 234 235 /* If we wrote to the nonvolatile region, wait 10msec for write cycle*/ 236 if (reg_base < X1205_CCR_BASE) { 237 unsigned char al0e[3] = { 0, X1205_REG_INT, 0 }; 238 239 msleep(10); 240 241 /* ...and set or clear the AL0E bit in the INT register */ 242 243 /* Need to set RWEL again as the write has cleared it */ 244 xfer = i2c_master_send(client, rwel, 3); 245 if (xfer != 3) { 246 dev_err(&client->dev, 247 "%s: aloe rwel - %d\n", 248 __func__, 249 xfer); 250 return -EIO; 251 } 252 253 if (alm_enable) 254 al0e[2] = X1205_INT_AL0E; 255 256 xfer = i2c_master_send(client, al0e, 3); 257 if (xfer != 3) { 258 dev_err(&client->dev, 259 "%s: al0e - %d\n", 260 __func__, 261 xfer); 262 return -EIO; 263 } 264 265 /* and wait 10msec again for this write to complete */ 266 msleep(10); 267 } 268 269 /* disable further writes */ 270 xfer = i2c_master_send(client, diswe, 3); 271 if (xfer != 3) { 272 dev_err(&client->dev, "%s: diswe - %d\n", __func__, xfer); 273 return -EIO; 274 } 275 276 return 0; 277} 278 279static int x1205_fix_osc(struct i2c_client *client) 280{ 281 int err; 282 struct rtc_time tm; 283 284 memset(&tm, 0, sizeof(tm)); 285 286 err = x1205_set_datetime(client, &tm, X1205_CCR_BASE, 0); 287 if (err < 0) 288 dev_err(&client->dev, "unable to restart the oscillator\n"); 289 290 return err; 291} 292 293static int x1205_get_dtrim(struct i2c_client *client, int *trim) 294{ 295 unsigned char dtr; 296 static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR }; 297 298 struct i2c_msg msgs[] = { 299 { /* setup read ptr */ 300 .addr = client->addr, 301 .len = 2, 302 .buf = dtr_addr 303 }, 304 { /* read dtr */ 305 .addr = client->addr, 306 .flags = I2C_M_RD, 307 .len = 1, 308 .buf = &dtr 309 }, 310 }; 311 312 /* read dtr register */ 313 if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { 314 dev_err(&client->dev, "%s: read error\n", __func__); 315 return -EIO; 316 } 317 318 dev_dbg(&client->dev, "%s: raw dtr=%x\n", __func__, dtr); 319 320 *trim = 0; 321 322 if (dtr & X1205_DTR_DTR0) 323 *trim += 20; 324 325 if (dtr & X1205_DTR_DTR1) 326 *trim += 10; 327 328 if (dtr & X1205_DTR_DTR2) 329 *trim = -*trim; 330 331 return 0; 332} 333 334static int x1205_get_atrim(struct i2c_client *client, int *trim) 335{ 336 s8 atr; 337 static unsigned char atr_addr[2] = { 0, X1205_REG_ATR }; 338 339 struct i2c_msg msgs[] = { 340 {/* setup read ptr */ 341 .addr = client->addr, 342 .len = 2, 343 .buf = atr_addr 344 }, 345 {/* read atr */ 346 .addr = client->addr, 347 .flags = I2C_M_RD, 348 .len = 1, 349 .buf = &atr 350 }, 351 }; 352 353 /* read atr register */ 354 if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { 355 dev_err(&client->dev, "%s: read error\n", __func__); 356 return -EIO; 357 } 358 359 dev_dbg(&client->dev, "%s: raw atr=%x\n", __func__, atr); 360 361 /* atr is a two's complement value on 6 bits, 362 * perform sign extension. The formula is 363 * Catr = (atr * 0.25pF) + 11.00pF. 364 */ 365 atr = sign_extend32(atr, 5); 366 367 dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __func__, atr, atr); 368 369 *trim = (atr * 250) + 11000; 370 371 dev_dbg(&client->dev, "%s: real=%d\n", __func__, *trim); 372 373 return 0; 374} 375 376struct x1205_limit { 377 unsigned char reg, mask, min, max; 378}; 379 380static int x1205_validate_client(struct i2c_client *client) 381{ 382 int i, xfer; 383 384 /* Probe array. We will read the register at the specified 385 * address and check if the given bits are zero. 386 */ 387 static const unsigned char probe_zero_pattern[] = { 388 /* register, mask */ 389 X1205_REG_SR, 0x18, 390 X1205_REG_DTR, 0xF8, 391 X1205_REG_ATR, 0xC0, 392 X1205_REG_INT, 0x18, 393 X1205_REG_0, 0xFF, 394 }; 395 396 static const struct x1205_limit probe_limits_pattern[] = { 397 /* register, mask, min, max */ 398 { X1205_REG_Y2K, 0xFF, 19, 20 }, 399 { X1205_REG_DW, 0xFF, 0, 6 }, 400 { X1205_REG_YR, 0xFF, 0, 99 }, 401 { X1205_REG_MO, 0xFF, 0, 12 }, 402 { X1205_REG_DT, 0xFF, 0, 31 }, 403 { X1205_REG_HR, 0x7F, 0, 23 }, 404 { X1205_REG_MN, 0xFF, 0, 59 }, 405 { X1205_REG_SC, 0xFF, 0, 59 }, 406 { X1205_REG_Y2K1, 0xFF, 19, 20 }, 407 { X1205_REG_Y2K0, 0xFF, 19, 20 }, 408 }; 409 410 /* check that registers have bits a 0 where expected */ 411 for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) { 412 unsigned char buf; 413 414 unsigned char addr[2] = { 0, probe_zero_pattern[i] }; 415 416 struct i2c_msg msgs[2] = { 417 { 418 .addr = client->addr, 419 .len = 2, 420 .buf = addr 421 }, 422 { 423 .addr = client->addr, 424 .flags = I2C_M_RD, 425 .len = 1, 426 .buf = &buf 427 }, 428 }; 429 430 xfer = i2c_transfer(client->adapter, msgs, 2); 431 if (xfer != 2) { 432 dev_err(&client->dev, 433 "%s: could not read register %x\n", 434 __func__, probe_zero_pattern[i]); 435 436 return -EIO; 437 } 438 439 if ((buf & probe_zero_pattern[i+1]) != 0) { 440 dev_err(&client->dev, 441 "%s: register=%02x, zero pattern=%d, value=%x\n", 442 __func__, probe_zero_pattern[i], i, buf); 443 444 return -ENODEV; 445 } 446 } 447 448 /* check limits (only registers with bcd values) */ 449 for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) { 450 unsigned char reg, value; 451 452 unsigned char addr[2] = { 0, probe_limits_pattern[i].reg }; 453 454 struct i2c_msg msgs[2] = { 455 { 456 .addr = client->addr, 457 .len = 2, 458 .buf = addr 459 }, 460 { 461 .addr = client->addr, 462 .flags = I2C_M_RD, 463 .len = 1, 464 .buf = ® 465 }, 466 }; 467 468 xfer = i2c_transfer(client->adapter, msgs, 2); 469 if (xfer != 2) { 470 dev_err(&client->dev, 471 "%s: could not read register %x\n", 472 __func__, probe_limits_pattern[i].reg); 473 474 return -EIO; 475 } 476 477 value = bcd2bin(reg & probe_limits_pattern[i].mask); 478 479 if (value > probe_limits_pattern[i].max || 480 value < probe_limits_pattern[i].min) { 481 dev_dbg(&client->dev, 482 "%s: register=%x, lim pattern=%d, value=%d\n", 483 __func__, probe_limits_pattern[i].reg, 484 i, value); 485 486 return -ENODEV; 487 } 488 } 489 490 return 0; 491} 492 493static int x1205_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) 494{ 495 int err; 496 unsigned char intreg, status; 497 static unsigned char int_addr[2] = { 0, X1205_REG_INT }; 498 struct i2c_client *client = to_i2c_client(dev); 499 struct i2c_msg msgs[] = { 500 { /* setup read ptr */ 501 .addr = client->addr, 502 .len = 2, 503 .buf = int_addr 504 }, 505 {/* read INT register */ 506 507 .addr = client->addr, 508 .flags = I2C_M_RD, 509 .len = 1, 510 .buf = &intreg 511 }, 512 }; 513 514 /* read interrupt register and status register */ 515 if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { 516 dev_err(&client->dev, "%s: read error\n", __func__); 517 return -EIO; 518 } 519 err = x1205_get_status(client, &status); 520 if (err == 0) { 521 alrm->pending = (status & X1205_SR_AL0) ? 1 : 0; 522 alrm->enabled = (intreg & X1205_INT_AL0E) ? 1 : 0; 523 err = x1205_get_datetime(client, &alrm->time, X1205_ALM0_BASE); 524 } 525 return err; 526} 527 528static int x1205_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) 529{ 530 return x1205_set_datetime(to_i2c_client(dev), 531 &alrm->time, X1205_ALM0_BASE, alrm->enabled); 532} 533 534static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm) 535{ 536 return x1205_get_datetime(to_i2c_client(dev), 537 tm, X1205_CCR_BASE); 538} 539 540static int x1205_rtc_set_time(struct device *dev, struct rtc_time *tm) 541{ 542 return x1205_set_datetime(to_i2c_client(dev), 543 tm, X1205_CCR_BASE, 0); 544} 545 546static int x1205_rtc_proc(struct device *dev, struct seq_file *seq) 547{ 548 int err, dtrim, atrim; 549 550 err = x1205_get_dtrim(to_i2c_client(dev), &dtrim); 551 if (!err) 552 seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim); 553 554 err = x1205_get_atrim(to_i2c_client(dev), &atrim); 555 if (!err) 556 seq_printf(seq, "analog_trim\t: %d.%02d pF\n", 557 atrim / 1000, atrim % 1000); 558 return 0; 559} 560 561static const struct rtc_class_ops x1205_rtc_ops = { 562 .proc = x1205_rtc_proc, 563 .read_time = x1205_rtc_read_time, 564 .set_time = x1205_rtc_set_time, 565 .read_alarm = x1205_rtc_read_alarm, 566 .set_alarm = x1205_rtc_set_alarm, 567}; 568 569static ssize_t x1205_sysfs_show_atrim(struct device *dev, 570 struct device_attribute *attr, char *buf) 571{ 572 int err, atrim; 573 574 err = x1205_get_atrim(to_i2c_client(dev), &atrim); 575 if (err) 576 return err; 577 578 return sprintf(buf, "%d.%02d pF\n", atrim / 1000, atrim % 1000); 579} 580static DEVICE_ATTR(atrim, S_IRUGO, x1205_sysfs_show_atrim, NULL); 581 582static ssize_t x1205_sysfs_show_dtrim(struct device *dev, 583 struct device_attribute *attr, char *buf) 584{ 585 int err, dtrim; 586 587 err = x1205_get_dtrim(to_i2c_client(dev), &dtrim); 588 if (err) 589 return err; 590 591 return sprintf(buf, "%d ppm\n", dtrim); 592} 593static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL); 594 595static int x1205_sysfs_register(struct device *dev) 596{ 597 int err; 598 599 err = device_create_file(dev, &dev_attr_atrim); 600 if (err) 601 return err; 602 603 err = device_create_file(dev, &dev_attr_dtrim); 604 if (err) 605 device_remove_file(dev, &dev_attr_atrim); 606 607 return err; 608} 609 610static void x1205_sysfs_unregister(struct device *dev) 611{ 612 device_remove_file(dev, &dev_attr_atrim); 613 device_remove_file(dev, &dev_attr_dtrim); 614} 615 616 617static int x1205_probe(struct i2c_client *client) 618{ 619 int err = 0; 620 unsigned char sr; 621 struct rtc_device *rtc; 622 623 dev_dbg(&client->dev, "%s\n", __func__); 624 625 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) 626 return -ENODEV; 627 628 if (x1205_validate_client(client) < 0) 629 return -ENODEV; 630 631 rtc = devm_rtc_device_register(&client->dev, x1205_driver.driver.name, 632 &x1205_rtc_ops, THIS_MODULE); 633 634 if (IS_ERR(rtc)) 635 return PTR_ERR(rtc); 636 637 i2c_set_clientdata(client, rtc); 638 639 /* Check for power failures and eventually enable the osc */ 640 err = x1205_get_status(client, &sr); 641 if (!err) { 642 if (sr & X1205_SR_RTCF) { 643 dev_err(&client->dev, 644 "power failure detected, " 645 "please set the clock\n"); 646 udelay(50); 647 x1205_fix_osc(client); 648 } 649 } else { 650 dev_err(&client->dev, "couldn't read status\n"); 651 } 652 653 err = x1205_sysfs_register(&client->dev); 654 if (err) 655 dev_err(&client->dev, "Unable to create sysfs entries\n"); 656 657 return 0; 658} 659 660static void x1205_remove(struct i2c_client *client) 661{ 662 x1205_sysfs_unregister(&client->dev); 663} 664 665static const struct i2c_device_id x1205_id[] = { 666 { "x1205", 0 }, 667 { } 668}; 669MODULE_DEVICE_TABLE(i2c, x1205_id); 670 671static const struct of_device_id x1205_dt_ids[] = { 672 { .compatible = "xircom,x1205", }, 673 {}, 674}; 675MODULE_DEVICE_TABLE(of, x1205_dt_ids); 676 677static struct i2c_driver x1205_driver = { 678 .driver = { 679 .name = "rtc-x1205", 680 .of_match_table = x1205_dt_ids, 681 }, 682 .probe = x1205_probe, 683 .remove = x1205_remove, 684 .id_table = x1205_id, 685}; 686 687module_i2c_driver(x1205_driver); 688 689MODULE_AUTHOR( 690 "Karen Spearel <kas111 at gmail dot com>, " 691 "Alessandro Zummo <a.zummo@towertech.it>"); 692MODULE_DESCRIPTION("Xicor/Intersil X1205 RTC driver"); 693MODULE_LICENSE("GPL"); 694