1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright (C) STMicroelectronics 2016 4 * 5 * Author: Gerald Baeza <gerald.baeza@st.com> 6 * 7 * Inspired by timer-stm32.c from Maxime Coquelin 8 * pwm-atmel.c from Bo Shen 9 */ 10 11#include <linux/bitfield.h> 12#include <linux/mfd/stm32-timers.h> 13#include <linux/module.h> 14#include <linux/of.h> 15#include <linux/pinctrl/consumer.h> 16#include <linux/platform_device.h> 17#include <linux/pwm.h> 18 19#define CCMR_CHANNEL_SHIFT 8 20#define CCMR_CHANNEL_MASK 0xFF 21#define MAX_BREAKINPUT 2 22 23struct stm32_breakinput { 24 u32 index; 25 u32 level; 26 u32 filter; 27}; 28 29struct stm32_pwm { 30 struct mutex lock; /* protect pwm config/enable */ 31 struct clk *clk; 32 struct regmap *regmap; 33 u32 max_arr; 34 bool have_complementary_output; 35 struct stm32_breakinput breakinputs[MAX_BREAKINPUT]; 36 unsigned int num_breakinputs; 37 u32 capture[4] ____cacheline_aligned; /* DMA'able buffer */ 38}; 39 40static inline struct stm32_pwm *to_stm32_pwm_dev(struct pwm_chip *chip) 41{ 42 return pwmchip_get_drvdata(chip); 43} 44 45static u32 active_channels(struct stm32_pwm *dev) 46{ 47 u32 ccer; 48 49 regmap_read(dev->regmap, TIM_CCER, &ccer); 50 51 return ccer & TIM_CCER_CCXE; 52} 53 54#define TIM_CCER_CC12P (TIM_CCER_CC1P | TIM_CCER_CC2P) 55#define TIM_CCER_CC12E (TIM_CCER_CC1E | TIM_CCER_CC2E) 56#define TIM_CCER_CC34P (TIM_CCER_CC3P | TIM_CCER_CC4P) 57#define TIM_CCER_CC34E (TIM_CCER_CC3E | TIM_CCER_CC4E) 58 59/* 60 * Capture using PWM input mode: 61 * ___ ___ 62 * TI[1, 2, 3 or 4]: ........._| |________| 63 * ^0 ^1 ^2 64 * . . . 65 * . . XXXXX 66 * . . XXXXX | 67 * . XXXXX . | 68 * XXXXX . . | 69 * COUNTER: ______XXXXX . . . |_XXX 70 * start^ . . . ^stop 71 * . . . . 72 * v v . v 73 * v 74 * CCR1/CCR3: tx..........t0...........t2 75 * CCR2/CCR4: tx..............t1......... 76 * 77 * DMA burst transfer: | | 78 * v v 79 * DMA buffer: { t0, tx } { t2, t1 } 80 * DMA done: ^ 81 * 82 * 0: IC1/3 snapchot on rising edge: counter value -> CCR1/CCR3 83 * + DMA transfer CCR[1/3] & CCR[2/4] values (t0, tx: doesn't care) 84 * 1: IC2/4 snapchot on falling edge: counter value -> CCR2/CCR4 85 * 2: IC1/3 snapchot on rising edge: counter value -> CCR1/CCR3 86 * + DMA transfer CCR[1/3] & CCR[2/4] values (t2, t1) 87 * 88 * DMA done, compute: 89 * - Period = t2 - t0 90 * - Duty cycle = t1 - t0 91 */ 92static int stm32_pwm_raw_capture(struct pwm_chip *chip, struct pwm_device *pwm, 93 unsigned long tmo_ms, u32 *raw_prd, 94 u32 *raw_dty) 95{ 96 struct stm32_pwm *priv = to_stm32_pwm_dev(chip); 97 struct device *parent = pwmchip_parent(chip)->parent; 98 enum stm32_timers_dmas dma_id; 99 u32 ccen, ccr; 100 int ret; 101 102 /* Ensure registers have been updated, enable counter and capture */ 103 regmap_set_bits(priv->regmap, TIM_EGR, TIM_EGR_UG); 104 regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN); 105 106 /* Use cc1 or cc3 DMA resp for PWM input channels 1 & 2 or 3 & 4 */ 107 dma_id = pwm->hwpwm < 2 ? STM32_TIMERS_DMA_CH1 : STM32_TIMERS_DMA_CH3; 108 ccen = pwm->hwpwm < 2 ? TIM_CCER_CC12E : TIM_CCER_CC34E; 109 ccr = pwm->hwpwm < 2 ? TIM_CCR1 : TIM_CCR3; 110 regmap_set_bits(priv->regmap, TIM_CCER, ccen); 111 112 /* 113 * Timer DMA burst mode. Request 2 registers, 2 bursts, to get both 114 * CCR1 & CCR2 (or CCR3 & CCR4) on each capture event. 115 * We'll get two capture snapchots: { CCR1, CCR2 }, { CCR1, CCR2 } 116 * or { CCR3, CCR4 }, { CCR3, CCR4 } 117 */ 118 ret = stm32_timers_dma_burst_read(parent, priv->capture, dma_id, ccr, 2, 119 2, tmo_ms); 120 if (ret) 121 goto stop; 122 123 /* Period: t2 - t0 (take care of counter overflow) */ 124 if (priv->capture[0] <= priv->capture[2]) 125 *raw_prd = priv->capture[2] - priv->capture[0]; 126 else 127 *raw_prd = priv->max_arr - priv->capture[0] + priv->capture[2]; 128 129 /* Duty cycle capture requires at least two capture units */ 130 if (pwm->chip->npwm < 2) 131 *raw_dty = 0; 132 else if (priv->capture[0] <= priv->capture[3]) 133 *raw_dty = priv->capture[3] - priv->capture[0]; 134 else 135 *raw_dty = priv->max_arr - priv->capture[0] + priv->capture[3]; 136 137 if (*raw_dty > *raw_prd) { 138 /* 139 * Race beetween PWM input and DMA: it may happen 140 * falling edge triggers new capture on TI2/4 before DMA 141 * had a chance to read CCR2/4. It means capture[1] 142 * contains period + duty_cycle. So, subtract period. 143 */ 144 *raw_dty -= *raw_prd; 145 } 146 147stop: 148 regmap_clear_bits(priv->regmap, TIM_CCER, ccen); 149 regmap_clear_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN); 150 151 return ret; 152} 153 154static int stm32_pwm_capture(struct pwm_chip *chip, struct pwm_device *pwm, 155 struct pwm_capture *result, unsigned long tmo_ms) 156{ 157 struct stm32_pwm *priv = to_stm32_pwm_dev(chip); 158 unsigned long long prd, div, dty; 159 unsigned long rate; 160 unsigned int psc = 0, icpsc, scale; 161 u32 raw_prd = 0, raw_dty = 0; 162 int ret = 0; 163 164 mutex_lock(&priv->lock); 165 166 if (active_channels(priv)) { 167 ret = -EBUSY; 168 goto unlock; 169 } 170 171 ret = clk_enable(priv->clk); 172 if (ret) { 173 dev_err(pwmchip_parent(chip), "failed to enable counter clock\n"); 174 goto unlock; 175 } 176 177 rate = clk_get_rate(priv->clk); 178 if (!rate) { 179 ret = -EINVAL; 180 goto clk_dis; 181 } 182 183 /* prescaler: fit timeout window provided by upper layer */ 184 div = (unsigned long long)rate * (unsigned long long)tmo_ms; 185 do_div(div, MSEC_PER_SEC); 186 prd = div; 187 while ((div > priv->max_arr) && (psc < MAX_TIM_PSC)) { 188 psc++; 189 div = prd; 190 do_div(div, psc + 1); 191 } 192 regmap_write(priv->regmap, TIM_ARR, priv->max_arr); 193 regmap_write(priv->regmap, TIM_PSC, psc); 194 195 /* Reset input selector to its default input and disable slave mode */ 196 regmap_write(priv->regmap, TIM_TISEL, 0x0); 197 regmap_write(priv->regmap, TIM_SMCR, 0x0); 198 199 /* Map TI1 or TI2 PWM input to IC1 & IC2 (or TI3/4 to IC3 & IC4) */ 200 regmap_update_bits(priv->regmap, 201 pwm->hwpwm < 2 ? TIM_CCMR1 : TIM_CCMR2, 202 TIM_CCMR_CC1S | TIM_CCMR_CC2S, pwm->hwpwm & 0x1 ? 203 TIM_CCMR_CC1S_TI2 | TIM_CCMR_CC2S_TI2 : 204 TIM_CCMR_CC1S_TI1 | TIM_CCMR_CC2S_TI1); 205 206 /* Capture period on IC1/3 rising edge, duty cycle on IC2/4 falling. */ 207 regmap_update_bits(priv->regmap, TIM_CCER, pwm->hwpwm < 2 ? 208 TIM_CCER_CC12P : TIM_CCER_CC34P, pwm->hwpwm < 2 ? 209 TIM_CCER_CC2P : TIM_CCER_CC4P); 210 211 ret = stm32_pwm_raw_capture(chip, pwm, tmo_ms, &raw_prd, &raw_dty); 212 if (ret) 213 goto stop; 214 215 /* 216 * Got a capture. Try to improve accuracy at high rates: 217 * - decrease counter clock prescaler, scale up to max rate. 218 * - use input prescaler, capture once every /2 /4 or /8 edges. 219 */ 220 if (raw_prd) { 221 u32 max_arr = priv->max_arr - 0x1000; /* arbitrary margin */ 222 223 scale = max_arr / min(max_arr, raw_prd); 224 } else { 225 scale = priv->max_arr; /* bellow resolution, use max scale */ 226 } 227 228 if (psc && scale > 1) { 229 /* 2nd measure with new scale */ 230 psc /= scale; 231 regmap_write(priv->regmap, TIM_PSC, psc); 232 ret = stm32_pwm_raw_capture(chip, pwm, tmo_ms, &raw_prd, 233 &raw_dty); 234 if (ret) 235 goto stop; 236 } 237 238 /* Compute intermediate period not to exceed timeout at low rates */ 239 prd = (unsigned long long)raw_prd * (psc + 1) * NSEC_PER_SEC; 240 do_div(prd, rate); 241 242 for (icpsc = 0; icpsc < MAX_TIM_ICPSC ; icpsc++) { 243 /* input prescaler: also keep arbitrary margin */ 244 if (raw_prd >= (priv->max_arr - 0x1000) >> (icpsc + 1)) 245 break; 246 if (prd >= (tmo_ms * NSEC_PER_MSEC) >> (icpsc + 2)) 247 break; 248 } 249 250 if (!icpsc) 251 goto done; 252 253 /* Last chance to improve period accuracy, using input prescaler */ 254 regmap_update_bits(priv->regmap, 255 pwm->hwpwm < 2 ? TIM_CCMR1 : TIM_CCMR2, 256 TIM_CCMR_IC1PSC | TIM_CCMR_IC2PSC, 257 FIELD_PREP(TIM_CCMR_IC1PSC, icpsc) | 258 FIELD_PREP(TIM_CCMR_IC2PSC, icpsc)); 259 260 ret = stm32_pwm_raw_capture(chip, pwm, tmo_ms, &raw_prd, &raw_dty); 261 if (ret) 262 goto stop; 263 264 if (raw_dty >= (raw_prd >> icpsc)) { 265 /* 266 * We may fall here using input prescaler, when input 267 * capture starts on high side (before falling edge). 268 * Example with icpsc to capture on each 4 events: 269 * 270 * start 1st capture 2nd capture 271 * v v v 272 * ___ _____ _____ _____ _____ ____ 273 * TI1..4 |__| |__| |__| |__| |__| 274 * v v . . . . . v v 275 * icpsc1/3: . 0 . 1 . 2 . 3 . 0 276 * icpsc2/4: 0 1 2 3 0 277 * v v v v 278 * CCR1/3 ......t0..............................t2 279 * CCR2/4 ..t1..............................t1'... 280 * . . . 281 * Capture0: .<----------------------------->. 282 * Capture1: .<-------------------------->. . 283 * . . . 284 * Period: .<------> . . 285 * Low side: .<>. 286 * 287 * Result: 288 * - Period = Capture0 / icpsc 289 * - Duty = Period - Low side = Period - (Capture0 - Capture1) 290 */ 291 raw_dty = (raw_prd >> icpsc) - (raw_prd - raw_dty); 292 } 293 294done: 295 prd = (unsigned long long)raw_prd * (psc + 1) * NSEC_PER_SEC; 296 result->period = DIV_ROUND_UP_ULL(prd, rate << icpsc); 297 dty = (unsigned long long)raw_dty * (psc + 1) * NSEC_PER_SEC; 298 result->duty_cycle = DIV_ROUND_UP_ULL(dty, rate); 299stop: 300 regmap_write(priv->regmap, TIM_CCER, 0); 301 regmap_write(priv->regmap, pwm->hwpwm < 2 ? TIM_CCMR1 : TIM_CCMR2, 0); 302 regmap_write(priv->regmap, TIM_PSC, 0); 303clk_dis: 304 clk_disable(priv->clk); 305unlock: 306 mutex_unlock(&priv->lock); 307 308 return ret; 309} 310 311static int stm32_pwm_config(struct stm32_pwm *priv, unsigned int ch, 312 int duty_ns, int period_ns) 313{ 314 unsigned long long prd, div, dty; 315 unsigned int prescaler = 0; 316 u32 ccmr, mask, shift; 317 318 /* Period and prescaler values depends on clock rate */ 319 div = (unsigned long long)clk_get_rate(priv->clk) * period_ns; 320 321 do_div(div, NSEC_PER_SEC); 322 prd = div; 323 324 while (div > priv->max_arr) { 325 prescaler++; 326 div = prd; 327 do_div(div, prescaler + 1); 328 } 329 330 prd = div; 331 332 if (prescaler > MAX_TIM_PSC) 333 return -EINVAL; 334 335 /* 336 * All channels share the same prescaler and counter so when two 337 * channels are active at the same time we can't change them 338 */ 339 if (active_channels(priv) & ~(1 << ch * 4)) { 340 u32 psc, arr; 341 342 regmap_read(priv->regmap, TIM_PSC, &psc); 343 regmap_read(priv->regmap, TIM_ARR, &arr); 344 345 if ((psc != prescaler) || (arr != prd - 1)) 346 return -EBUSY; 347 } 348 349 regmap_write(priv->regmap, TIM_PSC, prescaler); 350 regmap_write(priv->regmap, TIM_ARR, prd - 1); 351 regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE); 352 353 /* Calculate the duty cycles */ 354 dty = prd * duty_ns; 355 do_div(dty, period_ns); 356 357 regmap_write(priv->regmap, TIM_CCR1 + 4 * ch, dty); 358 359 /* Configure output mode */ 360 shift = (ch & 0x1) * CCMR_CHANNEL_SHIFT; 361 ccmr = (TIM_CCMR_PE | TIM_CCMR_M1) << shift; 362 mask = CCMR_CHANNEL_MASK << shift; 363 364 if (ch < 2) 365 regmap_update_bits(priv->regmap, TIM_CCMR1, mask, ccmr); 366 else 367 regmap_update_bits(priv->regmap, TIM_CCMR2, mask, ccmr); 368 369 regmap_set_bits(priv->regmap, TIM_BDTR, TIM_BDTR_MOE); 370 371 return 0; 372} 373 374static int stm32_pwm_set_polarity(struct stm32_pwm *priv, unsigned int ch, 375 enum pwm_polarity polarity) 376{ 377 u32 mask; 378 379 mask = TIM_CCER_CC1P << (ch * 4); 380 if (priv->have_complementary_output) 381 mask |= TIM_CCER_CC1NP << (ch * 4); 382 383 regmap_update_bits(priv->regmap, TIM_CCER, mask, 384 polarity == PWM_POLARITY_NORMAL ? 0 : mask); 385 386 return 0; 387} 388 389static int stm32_pwm_enable(struct stm32_pwm *priv, unsigned int ch) 390{ 391 u32 mask; 392 int ret; 393 394 ret = clk_enable(priv->clk); 395 if (ret) 396 return ret; 397 398 /* Enable channel */ 399 mask = TIM_CCER_CC1E << (ch * 4); 400 if (priv->have_complementary_output) 401 mask |= TIM_CCER_CC1NE << (ch * 4); 402 403 regmap_set_bits(priv->regmap, TIM_CCER, mask); 404 405 /* Make sure that registers are updated */ 406 regmap_set_bits(priv->regmap, TIM_EGR, TIM_EGR_UG); 407 408 /* Enable controller */ 409 regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN); 410 411 return 0; 412} 413 414static void stm32_pwm_disable(struct stm32_pwm *priv, unsigned int ch) 415{ 416 u32 mask; 417 418 /* Disable channel */ 419 mask = TIM_CCER_CC1E << (ch * 4); 420 if (priv->have_complementary_output) 421 mask |= TIM_CCER_CC1NE << (ch * 4); 422 423 regmap_clear_bits(priv->regmap, TIM_CCER, mask); 424 425 /* When all channels are disabled, we can disable the controller */ 426 if (!active_channels(priv)) 427 regmap_clear_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN); 428 429 clk_disable(priv->clk); 430} 431 432static int stm32_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, 433 const struct pwm_state *state) 434{ 435 bool enabled; 436 struct stm32_pwm *priv = to_stm32_pwm_dev(chip); 437 int ret; 438 439 enabled = pwm->state.enabled; 440 441 if (enabled && !state->enabled) { 442 stm32_pwm_disable(priv, pwm->hwpwm); 443 return 0; 444 } 445 446 if (state->polarity != pwm->state.polarity) 447 stm32_pwm_set_polarity(priv, pwm->hwpwm, state->polarity); 448 449 ret = stm32_pwm_config(priv, pwm->hwpwm, 450 state->duty_cycle, state->period); 451 if (ret) 452 return ret; 453 454 if (!enabled && state->enabled) 455 ret = stm32_pwm_enable(priv, pwm->hwpwm); 456 457 return ret; 458} 459 460static int stm32_pwm_apply_locked(struct pwm_chip *chip, struct pwm_device *pwm, 461 const struct pwm_state *state) 462{ 463 struct stm32_pwm *priv = to_stm32_pwm_dev(chip); 464 int ret; 465 466 /* protect common prescaler for all active channels */ 467 mutex_lock(&priv->lock); 468 ret = stm32_pwm_apply(chip, pwm, state); 469 mutex_unlock(&priv->lock); 470 471 return ret; 472} 473 474static int stm32_pwm_get_state(struct pwm_chip *chip, 475 struct pwm_device *pwm, struct pwm_state *state) 476{ 477 struct stm32_pwm *priv = to_stm32_pwm_dev(chip); 478 int ch = pwm->hwpwm; 479 unsigned long rate; 480 u32 ccer, psc, arr, ccr; 481 u64 dty, prd; 482 int ret; 483 484 mutex_lock(&priv->lock); 485 486 ret = regmap_read(priv->regmap, TIM_CCER, &ccer); 487 if (ret) 488 goto out; 489 490 state->enabled = ccer & (TIM_CCER_CC1E << (ch * 4)); 491 state->polarity = (ccer & (TIM_CCER_CC1P << (ch * 4))) ? 492 PWM_POLARITY_INVERSED : PWM_POLARITY_NORMAL; 493 ret = regmap_read(priv->regmap, TIM_PSC, &psc); 494 if (ret) 495 goto out; 496 ret = regmap_read(priv->regmap, TIM_ARR, &arr); 497 if (ret) 498 goto out; 499 ret = regmap_read(priv->regmap, TIM_CCR1 + 4 * ch, &ccr); 500 if (ret) 501 goto out; 502 503 rate = clk_get_rate(priv->clk); 504 505 prd = (u64)NSEC_PER_SEC * (psc + 1) * (arr + 1); 506 state->period = DIV_ROUND_UP_ULL(prd, rate); 507 dty = (u64)NSEC_PER_SEC * (psc + 1) * ccr; 508 state->duty_cycle = DIV_ROUND_UP_ULL(dty, rate); 509 510out: 511 mutex_unlock(&priv->lock); 512 return ret; 513} 514 515static const struct pwm_ops stm32pwm_ops = { 516 .apply = stm32_pwm_apply_locked, 517 .get_state = stm32_pwm_get_state, 518 .capture = IS_ENABLED(CONFIG_DMA_ENGINE) ? stm32_pwm_capture : NULL, 519}; 520 521static int stm32_pwm_set_breakinput(struct stm32_pwm *priv, 522 const struct stm32_breakinput *bi) 523{ 524 u32 shift = TIM_BDTR_BKF_SHIFT(bi->index); 525 u32 bke = TIM_BDTR_BKE(bi->index); 526 u32 bkp = TIM_BDTR_BKP(bi->index); 527 u32 bkf = TIM_BDTR_BKF(bi->index); 528 u32 mask = bkf | bkp | bke; 529 u32 bdtr; 530 531 bdtr = (bi->filter & TIM_BDTR_BKF_MASK) << shift | bke; 532 533 if (bi->level) 534 bdtr |= bkp; 535 536 regmap_update_bits(priv->regmap, TIM_BDTR, mask, bdtr); 537 538 regmap_read(priv->regmap, TIM_BDTR, &bdtr); 539 540 return (bdtr & bke) ? 0 : -EINVAL; 541} 542 543static int stm32_pwm_apply_breakinputs(struct stm32_pwm *priv) 544{ 545 unsigned int i; 546 int ret; 547 548 for (i = 0; i < priv->num_breakinputs; i++) { 549 ret = stm32_pwm_set_breakinput(priv, &priv->breakinputs[i]); 550 if (ret < 0) 551 return ret; 552 } 553 554 return 0; 555} 556 557static int stm32_pwm_probe_breakinputs(struct stm32_pwm *priv, 558 struct device_node *np) 559{ 560 int nb, ret, array_size; 561 unsigned int i; 562 563 nb = of_property_count_elems_of_size(np, "st,breakinput", 564 sizeof(struct stm32_breakinput)); 565 566 /* 567 * Because "st,breakinput" parameter is optional do not make probe 568 * failed if it doesn't exist. 569 */ 570 if (nb <= 0) 571 return 0; 572 573 if (nb > MAX_BREAKINPUT) 574 return -EINVAL; 575 576 priv->num_breakinputs = nb; 577 array_size = nb * sizeof(struct stm32_breakinput) / sizeof(u32); 578 ret = of_property_read_u32_array(np, "st,breakinput", 579 (u32 *)priv->breakinputs, array_size); 580 if (ret) 581 return ret; 582 583 for (i = 0; i < priv->num_breakinputs; i++) { 584 if (priv->breakinputs[i].index > 1 || 585 priv->breakinputs[i].level > 1 || 586 priv->breakinputs[i].filter > 15) 587 return -EINVAL; 588 } 589 590 return stm32_pwm_apply_breakinputs(priv); 591} 592 593static void stm32_pwm_detect_complementary(struct stm32_pwm *priv) 594{ 595 u32 ccer; 596 597 /* 598 * If complementary bit doesn't exist writing 1 will have no 599 * effect so we can detect it. 600 */ 601 regmap_set_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE); 602 regmap_read(priv->regmap, TIM_CCER, &ccer); 603 regmap_clear_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE); 604 605 priv->have_complementary_output = (ccer != 0); 606} 607 608static unsigned int stm32_pwm_detect_channels(struct regmap *regmap, 609 unsigned int *num_enabled) 610{ 611 u32 ccer, ccer_backup; 612 613 /* 614 * If channels enable bits don't exist writing 1 will have no 615 * effect so we can detect and count them. 616 */ 617 regmap_read(regmap, TIM_CCER, &ccer_backup); 618 regmap_set_bits(regmap, TIM_CCER, TIM_CCER_CCXE); 619 regmap_read(regmap, TIM_CCER, &ccer); 620 regmap_write(regmap, TIM_CCER, ccer_backup); 621 622 *num_enabled = hweight32(ccer_backup & TIM_CCER_CCXE); 623 624 return hweight32(ccer & TIM_CCER_CCXE); 625} 626 627static int stm32_pwm_probe(struct platform_device *pdev) 628{ 629 struct device *dev = &pdev->dev; 630 struct device_node *np = dev->of_node; 631 struct stm32_timers *ddata = dev_get_drvdata(pdev->dev.parent); 632 struct pwm_chip *chip; 633 struct stm32_pwm *priv; 634 unsigned int npwm, num_enabled; 635 unsigned int i; 636 int ret; 637 638 npwm = stm32_pwm_detect_channels(ddata->regmap, &num_enabled); 639 640 chip = devm_pwmchip_alloc(dev, npwm, sizeof(*priv)); 641 if (IS_ERR(chip)) 642 return PTR_ERR(chip); 643 priv = to_stm32_pwm_dev(chip); 644 645 mutex_init(&priv->lock); 646 priv->regmap = ddata->regmap; 647 priv->clk = ddata->clk; 648 priv->max_arr = ddata->max_arr; 649 650 if (!priv->regmap || !priv->clk) 651 return -EINVAL; 652 653 ret = stm32_pwm_probe_breakinputs(priv, np); 654 if (ret) 655 return ret; 656 657 stm32_pwm_detect_complementary(priv); 658 659 chip->ops = &stm32pwm_ops; 660 661 /* Initialize clock refcount to number of enabled PWM channels. */ 662 for (i = 0; i < num_enabled; i++) 663 clk_enable(priv->clk); 664 665 ret = devm_pwmchip_add(dev, chip); 666 if (ret < 0) 667 return ret; 668 669 platform_set_drvdata(pdev, chip); 670 671 return 0; 672} 673 674static int stm32_pwm_suspend(struct device *dev) 675{ 676 struct pwm_chip *chip = dev_get_drvdata(dev); 677 struct stm32_pwm *priv = to_stm32_pwm_dev(chip); 678 unsigned int i; 679 u32 ccer, mask; 680 681 /* Look for active channels */ 682 ccer = active_channels(priv); 683 684 for (i = 0; i < chip->npwm; i++) { 685 mask = TIM_CCER_CC1E << (i * 4); 686 if (ccer & mask) { 687 dev_err(dev, "PWM %u still in use by consumer %s\n", 688 i, chip->pwms[i].label); 689 return -EBUSY; 690 } 691 } 692 693 return pinctrl_pm_select_sleep_state(dev); 694} 695 696static int stm32_pwm_resume(struct device *dev) 697{ 698 struct pwm_chip *chip = dev_get_drvdata(dev); 699 struct stm32_pwm *priv = to_stm32_pwm_dev(chip); 700 int ret; 701 702 ret = pinctrl_pm_select_default_state(dev); 703 if (ret) 704 return ret; 705 706 /* restore breakinput registers that may have been lost in low power */ 707 return stm32_pwm_apply_breakinputs(priv); 708} 709 710static DEFINE_SIMPLE_DEV_PM_OPS(stm32_pwm_pm_ops, stm32_pwm_suspend, stm32_pwm_resume); 711 712static const struct of_device_id stm32_pwm_of_match[] = { 713 { .compatible = "st,stm32-pwm", }, 714 { /* end node */ }, 715}; 716MODULE_DEVICE_TABLE(of, stm32_pwm_of_match); 717 718static struct platform_driver stm32_pwm_driver = { 719 .probe = stm32_pwm_probe, 720 .driver = { 721 .name = "stm32-pwm", 722 .of_match_table = stm32_pwm_of_match, 723 .pm = pm_ptr(&stm32_pwm_pm_ops), 724 }, 725}; 726module_platform_driver(stm32_pwm_driver); 727 728MODULE_ALIAS("platform:stm32-pwm"); 729MODULE_DESCRIPTION("STMicroelectronics STM32 PWM driver"); 730MODULE_LICENSE("GPL v2"); 731