1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * TWL4030/TPS65950 BCI (Battery Charger Interface) driver 4 * 5 * Copyright (C) 2010 Gra��vydas Ignotas <notasas@gmail.com> 6 * 7 * based on twl4030_bci_battery.c by TI 8 * Copyright (C) 2008 Texas Instruments, Inc. 9 */ 10 11#include <linux/init.h> 12#include <linux/module.h> 13#include <linux/slab.h> 14#include <linux/err.h> 15#include <linux/of.h> 16#include <linux/platform_device.h> 17#include <linux/interrupt.h> 18#include <linux/mfd/twl.h> 19#include <linux/power_supply.h> 20#include <linux/notifier.h> 21#include <linux/usb/otg.h> 22#include <linux/iio/consumer.h> 23 24#define TWL4030_BCIMDEN 0x00 25#define TWL4030_BCIMDKEY 0x01 26#define TWL4030_BCIMSTATEC 0x02 27#define TWL4030_BCIICHG 0x08 28#define TWL4030_BCIVAC 0x0a 29#define TWL4030_BCIVBUS 0x0c 30#define TWL4030_BCIMFSTS3 0x0F 31#define TWL4030_BCIMFSTS4 0x10 32#define TWL4030_BCICTL1 0x23 33#define TWL4030_BB_CFG 0x12 34#define TWL4030_BCIIREF1 0x27 35#define TWL4030_BCIIREF2 0x28 36#define TWL4030_BCIMFKEY 0x11 37#define TWL4030_BCIMFEN3 0x14 38#define TWL4030_BCIMFTH8 0x1d 39#define TWL4030_BCIMFTH9 0x1e 40#define TWL4030_BCIWDKEY 0x21 41 42#define TWL4030_BCIMFSTS1 0x01 43 44#define TWL4030_BCIAUTOWEN BIT(5) 45#define TWL4030_CONFIG_DONE BIT(4) 46#define TWL4030_CVENAC BIT(2) 47#define TWL4030_BCIAUTOUSB BIT(1) 48#define TWL4030_BCIAUTOAC BIT(0) 49#define TWL4030_CGAIN BIT(5) 50#define TWL4030_USBFASTMCHG BIT(2) 51#define TWL4030_STS_VBUS BIT(7) 52#define TWL4030_STS_USB_ID BIT(2) 53#define TWL4030_BBCHEN BIT(4) 54#define TWL4030_BBSEL_MASK 0x0c 55#define TWL4030_BBSEL_2V5 0x00 56#define TWL4030_BBSEL_3V0 0x04 57#define TWL4030_BBSEL_3V1 0x08 58#define TWL4030_BBSEL_3V2 0x0c 59#define TWL4030_BBISEL_MASK 0x03 60#define TWL4030_BBISEL_25uA 0x00 61#define TWL4030_BBISEL_150uA 0x01 62#define TWL4030_BBISEL_500uA 0x02 63#define TWL4030_BBISEL_1000uA 0x03 64 65#define TWL4030_BATSTSPCHG BIT(2) 66#define TWL4030_BATSTSMCHG BIT(6) 67 68/* BCI interrupts */ 69#define TWL4030_WOVF BIT(0) /* Watchdog overflow */ 70#define TWL4030_TMOVF BIT(1) /* Timer overflow */ 71#define TWL4030_ICHGHIGH BIT(2) /* Battery charge current high */ 72#define TWL4030_ICHGLOW BIT(3) /* Battery cc. low / FSM state change */ 73#define TWL4030_ICHGEOC BIT(4) /* Battery current end-of-charge */ 74#define TWL4030_TBATOR2 BIT(5) /* Battery temperature out of range 2 */ 75#define TWL4030_TBATOR1 BIT(6) /* Battery temperature out of range 1 */ 76#define TWL4030_BATSTS BIT(7) /* Battery status */ 77 78#define TWL4030_VBATLVL BIT(0) /* VBAT level */ 79#define TWL4030_VBATOV BIT(1) /* VBAT overvoltage */ 80#define TWL4030_VBUSOV BIT(2) /* VBUS overvoltage */ 81#define TWL4030_ACCHGOV BIT(3) /* Ac charger overvoltage */ 82 83#define TWL4030_MSTATEC_USB BIT(4) 84#define TWL4030_MSTATEC_AC BIT(5) 85#define TWL4030_MSTATEC_MASK 0x0f 86#define TWL4030_MSTATEC_QUICK1 0x02 87#define TWL4030_MSTATEC_QUICK7 0x07 88#define TWL4030_MSTATEC_COMPLETE1 0x0b 89#define TWL4030_MSTATEC_COMPLETE4 0x0e 90 91/* 92 * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11) 93 * then AC is available. 94 */ 95static inline int ac_available(struct iio_channel *channel_vac) 96{ 97 int val, err; 98 99 if (!channel_vac) 100 return 0; 101 102 err = iio_read_channel_processed(channel_vac, &val); 103 if (err < 0) 104 return 0; 105 return val > 4500; 106} 107 108static bool allow_usb; 109module_param(allow_usb, bool, 0644); 110MODULE_PARM_DESC(allow_usb, "Allow USB charge drawing default current"); 111 112struct twl4030_bci { 113 struct device *dev; 114 struct power_supply *ac; 115 struct power_supply *usb; 116 struct usb_phy *transceiver; 117 struct notifier_block usb_nb; 118 struct work_struct work; 119 int irq_chg; 120 int irq_bci; 121 int usb_enabled; 122 123 /* 124 * ichg_* and *_cur values in uA. If any are 'large', we set 125 * CGAIN to '1' which doubles the range for half the 126 * precision. 127 */ 128 unsigned int ichg_eoc, ichg_lo, ichg_hi; 129 unsigned int usb_cur, ac_cur; 130 struct iio_channel *channel_vac; 131 bool ac_is_active; 132 int usb_mode, ac_mode; /* charging mode requested */ 133#define CHARGE_OFF 0 134#define CHARGE_AUTO 1 135#define CHARGE_LINEAR 2 136 137 /* When setting the USB current we slowly increase the 138 * requested current until target is reached or the voltage 139 * drops below 4.75V. In the latter case we step back one 140 * step. 141 */ 142 unsigned int usb_cur_target; 143 struct delayed_work current_worker; 144#define USB_CUR_STEP 20000 /* 20mA at a time */ 145#define USB_MIN_VOLT 4750000 /* 4.75V */ 146#define USB_CUR_DELAY msecs_to_jiffies(100) 147#define USB_MAX_CURRENT 1700000 /* TWL4030 caps at 1.7A */ 148 149 unsigned long event; 150}; 151 152/* strings for 'usb_mode' values */ 153static const char *modes[] = { "off", "auto", "continuous" }; 154 155/* 156 * clear and set bits on an given register on a given module 157 */ 158static int twl4030_clear_set(u8 mod_no, u8 clear, u8 set, u8 reg) 159{ 160 u8 val = 0; 161 int ret; 162 163 ret = twl_i2c_read_u8(mod_no, &val, reg); 164 if (ret) 165 return ret; 166 167 val &= ~clear; 168 val |= set; 169 170 return twl_i2c_write_u8(mod_no, val, reg); 171} 172 173static int twl4030_bci_read(u8 reg, u8 *val) 174{ 175 return twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, val, reg); 176} 177 178static int twl4030_clear_set_boot_bci(u8 clear, u8 set) 179{ 180 return twl4030_clear_set(TWL_MODULE_PM_MASTER, clear, 181 TWL4030_CONFIG_DONE | TWL4030_BCIAUTOWEN | set, 182 TWL4030_PM_MASTER_BOOT_BCI); 183} 184 185static int twl4030bci_read_adc_val(u8 reg) 186{ 187 int ret, temp; 188 u8 val; 189 190 /* read MSB */ 191 ret = twl4030_bci_read(reg + 1, &val); 192 if (ret) 193 return ret; 194 195 temp = (int)(val & 0x03) << 8; 196 197 /* read LSB */ 198 ret = twl4030_bci_read(reg, &val); 199 if (ret) 200 return ret; 201 202 return temp | val; 203} 204 205/* 206 * TI provided formulas: 207 * CGAIN == 0: ICHG = (BCIICHG * 1.7) / (2^10 - 1) - 0.85 208 * CGAIN == 1: ICHG = (BCIICHG * 3.4) / (2^10 - 1) - 1.7 209 * Here we use integer approximation of: 210 * CGAIN == 0: val * 1.6618 - 0.85 * 1000 211 * CGAIN == 1: (val * 1.6618 - 0.85 * 1000) * 2 212 */ 213/* 214 * convert twl register value for currents into uA 215 */ 216static int regval2ua(int regval, bool cgain) 217{ 218 if (cgain) 219 return (regval * 16618 - 8500 * 1000) / 5; 220 else 221 return (regval * 16618 - 8500 * 1000) / 10; 222} 223 224/* 225 * convert uA currents into twl register value 226 */ 227static int ua2regval(int ua, bool cgain) 228{ 229 int ret; 230 if (cgain) 231 ua /= 2; 232 ret = (ua * 10 + 8500 * 1000) / 16618; 233 /* rounding problems */ 234 if (ret < 512) 235 ret = 512; 236 return ret; 237} 238 239static int twl4030_charger_update_current(struct twl4030_bci *bci) 240{ 241 int status; 242 int cur; 243 unsigned reg, cur_reg; 244 u8 bcictl1, oldreg, fullreg; 245 bool cgain = false; 246 u8 boot_bci; 247 248 /* 249 * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11) 250 * and AC is enabled, set current for 'ac' 251 */ 252 if (ac_available(bci->channel_vac)) { 253 cur = bci->ac_cur; 254 bci->ac_is_active = true; 255 } else { 256 cur = bci->usb_cur; 257 bci->ac_is_active = false; 258 if (cur > bci->usb_cur_target) { 259 cur = bci->usb_cur_target; 260 bci->usb_cur = cur; 261 } 262 if (cur < bci->usb_cur_target) 263 schedule_delayed_work(&bci->current_worker, USB_CUR_DELAY); 264 } 265 266 /* First, check thresholds and see if cgain is needed */ 267 if (bci->ichg_eoc >= 200000) 268 cgain = true; 269 if (bci->ichg_lo >= 400000) 270 cgain = true; 271 if (bci->ichg_hi >= 820000) 272 cgain = true; 273 if (cur > 852000) 274 cgain = true; 275 276 status = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1); 277 if (status < 0) 278 return status; 279 if (twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &boot_bci, 280 TWL4030_PM_MASTER_BOOT_BCI) < 0) 281 boot_bci = 0; 282 boot_bci &= 7; 283 284 if ((!!cgain) != !!(bcictl1 & TWL4030_CGAIN)) 285 /* Need to turn for charging while we change the 286 * CGAIN bit. Leave it off while everything is 287 * updated. 288 */ 289 twl4030_clear_set_boot_bci(boot_bci, 0); 290 291 /* 292 * For ichg_eoc, the hardware only supports reg values matching 293 * 100XXXX000, and requires the XXXX be stored in the high nibble 294 * of TWL4030_BCIMFTH8. 295 */ 296 reg = ua2regval(bci->ichg_eoc, cgain); 297 if (reg > 0x278) 298 reg = 0x278; 299 if (reg < 0x200) 300 reg = 0x200; 301 reg = (reg >> 3) & 0xf; 302 fullreg = reg << 4; 303 304 /* 305 * For ichg_lo, reg value must match 10XXXX0000. 306 * XXXX is stored in low nibble of TWL4030_BCIMFTH8. 307 */ 308 reg = ua2regval(bci->ichg_lo, cgain); 309 if (reg > 0x2F0) 310 reg = 0x2F0; 311 if (reg < 0x200) 312 reg = 0x200; 313 reg = (reg >> 4) & 0xf; 314 fullreg |= reg; 315 316 /* ichg_eoc and ichg_lo live in same register */ 317 status = twl4030_bci_read(TWL4030_BCIMFTH8, &oldreg); 318 if (status < 0) 319 return status; 320 if (oldreg != fullreg) { 321 status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xF4, 322 TWL4030_BCIMFKEY); 323 if (status < 0) 324 return status; 325 twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 326 fullreg, TWL4030_BCIMFTH8); 327 } 328 329 /* ichg_hi threshold must be 1XXXX01100 (I think) */ 330 reg = ua2regval(bci->ichg_hi, cgain); 331 if (reg > 0x3E0) 332 reg = 0x3E0; 333 if (reg < 0x200) 334 reg = 0x200; 335 fullreg = (reg >> 5) & 0xF; 336 fullreg <<= 4; 337 status = twl4030_bci_read(TWL4030_BCIMFTH9, &oldreg); 338 if (status < 0) 339 return status; 340 if ((oldreg & 0xF0) != fullreg) { 341 fullreg |= (oldreg & 0x0F); 342 status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7, 343 TWL4030_BCIMFKEY); 344 if (status < 0) 345 return status; 346 twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 347 fullreg, TWL4030_BCIMFTH9); 348 } 349 350 /* 351 * And finally, set the current. This is stored in 352 * two registers. 353 */ 354 reg = ua2regval(cur, cgain); 355 /* we have only 10 bits */ 356 if (reg > 0x3ff) 357 reg = 0x3ff; 358 status = twl4030_bci_read(TWL4030_BCIIREF1, &oldreg); 359 if (status < 0) 360 return status; 361 cur_reg = oldreg; 362 status = twl4030_bci_read(TWL4030_BCIIREF2, &oldreg); 363 if (status < 0) 364 return status; 365 cur_reg |= oldreg << 8; 366 if (reg != oldreg) { 367 /* disable write protection for one write access for 368 * BCIIREF */ 369 status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7, 370 TWL4030_BCIMFKEY); 371 if (status < 0) 372 return status; 373 status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 374 (reg & 0x100) ? 3 : 2, 375 TWL4030_BCIIREF2); 376 if (status < 0) 377 return status; 378 /* disable write protection for one write access for 379 * BCIIREF */ 380 status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7, 381 TWL4030_BCIMFKEY); 382 if (status < 0) 383 return status; 384 status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 385 reg & 0xff, 386 TWL4030_BCIIREF1); 387 } 388 if ((!!cgain) != !!(bcictl1 & TWL4030_CGAIN)) { 389 /* Flip CGAIN and re-enable charging */ 390 bcictl1 ^= TWL4030_CGAIN; 391 twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 392 bcictl1, TWL4030_BCICTL1); 393 twl4030_clear_set_boot_bci(0, boot_bci); 394 } 395 return 0; 396} 397 398static int twl4030_charger_get_current(void); 399 400static void twl4030_current_worker(struct work_struct *data) 401{ 402 int v, curr; 403 int res; 404 struct twl4030_bci *bci = container_of(data, struct twl4030_bci, 405 current_worker.work); 406 407 res = twl4030bci_read_adc_val(TWL4030_BCIVBUS); 408 if (res < 0) 409 v = 0; 410 else 411 /* BCIVBUS uses ADCIN8, 7/1023 V/step */ 412 v = res * 6843; 413 curr = twl4030_charger_get_current(); 414 415 dev_dbg(bci->dev, "v=%d cur=%d limit=%d target=%d\n", v, curr, 416 bci->usb_cur, bci->usb_cur_target); 417 418 if (v < USB_MIN_VOLT) { 419 /* Back up and stop adjusting. */ 420 if (bci->usb_cur >= USB_CUR_STEP) 421 bci->usb_cur -= USB_CUR_STEP; 422 bci->usb_cur_target = bci->usb_cur; 423 } else if (bci->usb_cur >= bci->usb_cur_target || 424 bci->usb_cur + USB_CUR_STEP > USB_MAX_CURRENT) { 425 /* Reached target and voltage is OK - stop */ 426 return; 427 } else { 428 bci->usb_cur += USB_CUR_STEP; 429 schedule_delayed_work(&bci->current_worker, USB_CUR_DELAY); 430 } 431 twl4030_charger_update_current(bci); 432} 433 434/* 435 * Enable/Disable USB Charge functionality. 436 */ 437static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable) 438{ 439 int ret; 440 u32 reg; 441 442 if (bci->usb_mode == CHARGE_OFF) 443 enable = false; 444 if (enable && !IS_ERR_OR_NULL(bci->transceiver)) { 445 446 twl4030_charger_update_current(bci); 447 448 /* Need to keep phy powered */ 449 if (!bci->usb_enabled) { 450 pm_runtime_get_sync(bci->transceiver->dev); 451 bci->usb_enabled = 1; 452 } 453 454 if (bci->usb_mode == CHARGE_AUTO) { 455 /* Enable interrupts now. */ 456 reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC | 457 TWL4030_TBATOR2 | TWL4030_TBATOR1 | 458 TWL4030_BATSTS); 459 ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg, 460 TWL4030_INTERRUPTS_BCIIMR1A); 461 if (ret < 0) { 462 dev_err(bci->dev, 463 "failed to unmask interrupts: %d\n", 464 ret); 465 return ret; 466 } 467 /* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */ 468 ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOUSB); 469 } 470 471 /* forcing USBFASTMCHG(BCIMFSTS4[2]) to 1 */ 472 ret = twl4030_clear_set(TWL_MODULE_MAIN_CHARGE, 0, 473 TWL4030_USBFASTMCHG, TWL4030_BCIMFSTS4); 474 if (bci->usb_mode == CHARGE_LINEAR) { 475 /* Enable interrupts now. */ 476 reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_TBATOR2 | 477 TWL4030_TBATOR1 | TWL4030_BATSTS); 478 ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg, 479 TWL4030_INTERRUPTS_BCIIMR1A); 480 if (ret < 0) { 481 dev_err(bci->dev, 482 "failed to unmask interrupts: %d\n", 483 ret); 484 return ret; 485 } 486 twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC|TWL4030_CVENAC, 0); 487 /* Watch dog key: WOVF acknowledge */ 488 ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x33, 489 TWL4030_BCIWDKEY); 490 /* 0x24 + EKEY6: off mode */ 491 ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x2a, 492 TWL4030_BCIMDKEY); 493 /* EKEY2: Linear charge: USB path */ 494 ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x26, 495 TWL4030_BCIMDKEY); 496 /* WDKEY5: stop watchdog count */ 497 ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xf3, 498 TWL4030_BCIWDKEY); 499 /* enable MFEN3 access */ 500 ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x9c, 501 TWL4030_BCIMFKEY); 502 /* ICHGEOCEN - end-of-charge monitor (current < 80mA) 503 * (charging continues) 504 * ICHGLOWEN - current level monitor (charge continues) 505 * don't monitor over-current or heat save 506 */ 507 ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xf0, 508 TWL4030_BCIMFEN3); 509 } 510 } else { 511 ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOUSB, 0); 512 ret |= twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x2a, 513 TWL4030_BCIMDKEY); 514 if (bci->usb_enabled) { 515 pm_runtime_mark_last_busy(bci->transceiver->dev); 516 pm_runtime_put_autosuspend(bci->transceiver->dev); 517 bci->usb_enabled = 0; 518 } 519 bci->usb_cur = 0; 520 } 521 522 return ret; 523} 524 525/* 526 * Enable/Disable AC Charge funtionality. 527 */ 528static int twl4030_charger_enable_ac(struct twl4030_bci *bci, bool enable) 529{ 530 int ret; 531 532 if (bci->ac_mode == CHARGE_OFF) 533 enable = false; 534 535 if (enable) 536 ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOAC); 537 else 538 ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC, 0); 539 540 return ret; 541} 542 543/* 544 * Enable/Disable charging of Backup Battery. 545 */ 546static int twl4030_charger_enable_backup(int uvolt, int uamp) 547{ 548 int ret; 549 u8 flags; 550 551 if (uvolt < 2500000 || 552 uamp < 25) { 553 /* disable charging of backup battery */ 554 ret = twl4030_clear_set(TWL_MODULE_PM_RECEIVER, 555 TWL4030_BBCHEN, 0, TWL4030_BB_CFG); 556 return ret; 557 } 558 559 flags = TWL4030_BBCHEN; 560 if (uvolt >= 3200000) 561 flags |= TWL4030_BBSEL_3V2; 562 else if (uvolt >= 3100000) 563 flags |= TWL4030_BBSEL_3V1; 564 else if (uvolt >= 3000000) 565 flags |= TWL4030_BBSEL_3V0; 566 else 567 flags |= TWL4030_BBSEL_2V5; 568 569 if (uamp >= 1000) 570 flags |= TWL4030_BBISEL_1000uA; 571 else if (uamp >= 500) 572 flags |= TWL4030_BBISEL_500uA; 573 else if (uamp >= 150) 574 flags |= TWL4030_BBISEL_150uA; 575 else 576 flags |= TWL4030_BBISEL_25uA; 577 578 ret = twl4030_clear_set(TWL_MODULE_PM_RECEIVER, 579 TWL4030_BBSEL_MASK | TWL4030_BBISEL_MASK, 580 flags, 581 TWL4030_BB_CFG); 582 583 return ret; 584} 585 586/* 587 * TWL4030 CHG_PRES (AC charger presence) events 588 */ 589static irqreturn_t twl4030_charger_interrupt(int irq, void *arg) 590{ 591 struct twl4030_bci *bci = arg; 592 593 dev_dbg(bci->dev, "CHG_PRES irq\n"); 594 /* reset current on each 'plug' event */ 595 bci->ac_cur = 500000; 596 twl4030_charger_update_current(bci); 597 power_supply_changed(bci->ac); 598 power_supply_changed(bci->usb); 599 600 return IRQ_HANDLED; 601} 602 603/* 604 * TWL4030 BCI monitoring events 605 */ 606static irqreturn_t twl4030_bci_interrupt(int irq, void *arg) 607{ 608 struct twl4030_bci *bci = arg; 609 u8 irqs1, irqs2; 610 int ret; 611 612 ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &irqs1, 613 TWL4030_INTERRUPTS_BCIISR1A); 614 if (ret < 0) 615 return IRQ_HANDLED; 616 617 ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &irqs2, 618 TWL4030_INTERRUPTS_BCIISR2A); 619 if (ret < 0) 620 return IRQ_HANDLED; 621 622 dev_dbg(bci->dev, "BCI irq %02x %02x\n", irqs2, irqs1); 623 624 if (irqs1 & (TWL4030_ICHGLOW | TWL4030_ICHGEOC)) { 625 /* charger state change, inform the core */ 626 power_supply_changed(bci->ac); 627 power_supply_changed(bci->usb); 628 } 629 twl4030_charger_update_current(bci); 630 631 /* various monitoring events, for now we just log them here */ 632 if (irqs1 & (TWL4030_TBATOR2 | TWL4030_TBATOR1)) 633 dev_warn(bci->dev, "battery temperature out of range\n"); 634 635 if (irqs1 & TWL4030_BATSTS) 636 dev_crit(bci->dev, "battery disconnected\n"); 637 638 if (irqs2 & TWL4030_VBATOV) 639 dev_crit(bci->dev, "VBAT overvoltage\n"); 640 641 if (irqs2 & TWL4030_VBUSOV) 642 dev_crit(bci->dev, "VBUS overvoltage\n"); 643 644 if (irqs2 & TWL4030_ACCHGOV) 645 dev_crit(bci->dev, "Ac charger overvoltage\n"); 646 647 return IRQ_HANDLED; 648} 649 650static void twl4030_bci_usb_work(struct work_struct *data) 651{ 652 struct twl4030_bci *bci = container_of(data, struct twl4030_bci, work); 653 654 switch (bci->event) { 655 case USB_EVENT_VBUS: 656 case USB_EVENT_CHARGER: 657 twl4030_charger_enable_usb(bci, true); 658 break; 659 case USB_EVENT_NONE: 660 twl4030_charger_enable_usb(bci, false); 661 break; 662 } 663} 664 665static int twl4030_bci_usb_ncb(struct notifier_block *nb, unsigned long val, 666 void *priv) 667{ 668 struct twl4030_bci *bci = container_of(nb, struct twl4030_bci, usb_nb); 669 670 dev_dbg(bci->dev, "OTG notify %lu\n", val); 671 672 /* reset current on each 'plug' event */ 673 if (allow_usb) 674 bci->usb_cur_target = 500000; 675 else 676 bci->usb_cur_target = 100000; 677 678 bci->event = val; 679 schedule_work(&bci->work); 680 681 return NOTIFY_OK; 682} 683 684/* 685 * sysfs charger enabled store 686 */ 687static ssize_t 688twl4030_bci_mode_store(struct device *dev, struct device_attribute *attr, 689 const char *buf, size_t n) 690{ 691 struct twl4030_bci *bci = dev_get_drvdata(dev->parent); 692 int mode; 693 int status; 694 695 mode = sysfs_match_string(modes, buf); 696 if (mode < 0) 697 return mode; 698 699 if (dev == &bci->ac->dev) { 700 if (mode == 2) 701 return -EINVAL; 702 twl4030_charger_enable_ac(bci, false); 703 bci->ac_mode = mode; 704 status = twl4030_charger_enable_ac(bci, true); 705 } else { 706 twl4030_charger_enable_usb(bci, false); 707 bci->usb_mode = mode; 708 status = twl4030_charger_enable_usb(bci, true); 709 } 710 return (status == 0) ? n : status; 711} 712 713/* 714 * sysfs charger enabled show 715 */ 716static ssize_t 717twl4030_bci_mode_show(struct device *dev, 718 struct device_attribute *attr, char *buf) 719{ 720 struct twl4030_bci *bci = dev_get_drvdata(dev->parent); 721 int len = 0; 722 int i; 723 int mode = bci->usb_mode; 724 725 if (dev == &bci->ac->dev) 726 mode = bci->ac_mode; 727 728 for (i = 0; i < ARRAY_SIZE(modes); i++) 729 if (mode == i) 730 len += sysfs_emit_at(buf, len, "[%s] ", modes[i]); 731 else 732 len += sysfs_emit_at(buf, len, "%s ", modes[i]); 733 buf[len-1] = '\n'; 734 return len; 735} 736static DEVICE_ATTR(mode, 0644, twl4030_bci_mode_show, 737 twl4030_bci_mode_store); 738 739static int twl4030_charger_get_current(void) 740{ 741 int curr; 742 int ret; 743 u8 bcictl1; 744 745 curr = twl4030bci_read_adc_val(TWL4030_BCIICHG); 746 if (curr < 0) 747 return curr; 748 749 ret = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1); 750 if (ret) 751 return ret; 752 753 return regval2ua(curr, bcictl1 & TWL4030_CGAIN); 754} 755 756/* 757 * Returns the main charge FSM state 758 * Or < 0 on failure. 759 */ 760static int twl4030bci_state(struct twl4030_bci *bci) 761{ 762 int ret; 763 u8 state; 764 765 ret = twl4030_bci_read(TWL4030_BCIMSTATEC, &state); 766 if (ret) { 767 dev_err(bci->dev, "error reading BCIMSTATEC\n"); 768 return ret; 769 } 770 771 dev_dbg(bci->dev, "state: %02x\n", state); 772 773 return state; 774} 775 776static int twl4030_bci_state_to_status(int state) 777{ 778 state &= TWL4030_MSTATEC_MASK; 779 if (TWL4030_MSTATEC_QUICK1 <= state && state <= TWL4030_MSTATEC_QUICK7) 780 return POWER_SUPPLY_STATUS_CHARGING; 781 else if (TWL4030_MSTATEC_COMPLETE1 <= state && 782 state <= TWL4030_MSTATEC_COMPLETE4) 783 return POWER_SUPPLY_STATUS_FULL; 784 else 785 return POWER_SUPPLY_STATUS_NOT_CHARGING; 786} 787 788static int twl4030_bci_get_property(struct power_supply *psy, 789 enum power_supply_property psp, 790 union power_supply_propval *val) 791{ 792 struct twl4030_bci *bci = dev_get_drvdata(psy->dev.parent); 793 int is_charging; 794 int state; 795 int ret; 796 797 state = twl4030bci_state(bci); 798 if (state < 0) 799 return state; 800 801 if (psy->desc->type == POWER_SUPPLY_TYPE_USB) 802 is_charging = state & TWL4030_MSTATEC_USB; 803 else 804 is_charging = state & TWL4030_MSTATEC_AC; 805 if (!is_charging) { 806 u8 s; 807 ret = twl4030_bci_read(TWL4030_BCIMDEN, &s); 808 if (ret < 0) 809 return ret; 810 if (psy->desc->type == POWER_SUPPLY_TYPE_USB) 811 is_charging = s & 1; 812 else 813 is_charging = s & 2; 814 if (is_charging) 815 /* A little white lie */ 816 state = TWL4030_MSTATEC_QUICK1; 817 } 818 819 switch (psp) { 820 case POWER_SUPPLY_PROP_STATUS: 821 if (is_charging) 822 val->intval = twl4030_bci_state_to_status(state); 823 else 824 val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; 825 break; 826 case POWER_SUPPLY_PROP_VOLTAGE_NOW: 827 /* charging must be active for meaningful result */ 828 if (!is_charging) 829 return -ENODATA; 830 if (psy->desc->type == POWER_SUPPLY_TYPE_USB) { 831 ret = twl4030bci_read_adc_val(TWL4030_BCIVBUS); 832 if (ret < 0) 833 return ret; 834 /* BCIVBUS uses ADCIN8, 7/1023 V/step */ 835 val->intval = ret * 6843; 836 } else { 837 ret = twl4030bci_read_adc_val(TWL4030_BCIVAC); 838 if (ret < 0) 839 return ret; 840 /* BCIVAC uses ADCIN11, 10/1023 V/step */ 841 val->intval = ret * 9775; 842 } 843 break; 844 case POWER_SUPPLY_PROP_CURRENT_NOW: 845 if (!is_charging) 846 return -ENODATA; 847 /* current measurement is shared between AC and USB */ 848 ret = twl4030_charger_get_current(); 849 if (ret < 0) 850 return ret; 851 val->intval = ret; 852 break; 853 case POWER_SUPPLY_PROP_ONLINE: 854 val->intval = is_charging && 855 twl4030_bci_state_to_status(state) != 856 POWER_SUPPLY_STATUS_NOT_CHARGING; 857 break; 858 case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: 859 val->intval = -1; 860 if (psy->desc->type != POWER_SUPPLY_TYPE_USB) { 861 if (!bci->ac_is_active) 862 val->intval = bci->ac_cur; 863 } else { 864 if (bci->ac_is_active) 865 val->intval = bci->usb_cur_target; 866 } 867 if (val->intval < 0) { 868 u8 bcictl1; 869 870 val->intval = twl4030bci_read_adc_val(TWL4030_BCIIREF1); 871 if (val->intval < 0) 872 return val->intval; 873 ret = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1); 874 if (ret < 0) 875 return ret; 876 val->intval = regval2ua(val->intval, bcictl1 & 877 TWL4030_CGAIN); 878 } 879 break; 880 default: 881 return -EINVAL; 882 } 883 884 return 0; 885} 886 887static int twl4030_bci_set_property(struct power_supply *psy, 888 enum power_supply_property psp, 889 const union power_supply_propval *val) 890{ 891 struct twl4030_bci *bci = dev_get_drvdata(psy->dev.parent); 892 893 switch (psp) { 894 case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: 895 if (psy->desc->type == POWER_SUPPLY_TYPE_USB) 896 bci->usb_cur_target = val->intval; 897 else 898 bci->ac_cur = val->intval; 899 twl4030_charger_update_current(bci); 900 break; 901 default: 902 return -EINVAL; 903 } 904 905 return 0; 906} 907 908static int twl4030_bci_property_is_writeable(struct power_supply *psy, 909 enum power_supply_property psp) 910{ 911 switch (psp) { 912 case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: 913 return true; 914 default: 915 return false; 916 } 917} 918 919static enum power_supply_property twl4030_charger_props[] = { 920 POWER_SUPPLY_PROP_STATUS, 921 POWER_SUPPLY_PROP_ONLINE, 922 POWER_SUPPLY_PROP_VOLTAGE_NOW, 923 POWER_SUPPLY_PROP_CURRENT_NOW, 924 POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, 925}; 926 927#ifdef CONFIG_OF 928static const struct twl4030_bci_platform_data * 929twl4030_bci_parse_dt(struct device *dev) 930{ 931 struct device_node *np = dev->of_node; 932 struct twl4030_bci_platform_data *pdata; 933 u32 num; 934 935 if (!np) 936 return NULL; 937 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); 938 if (!pdata) 939 return pdata; 940 941 if (of_property_read_u32(np, "ti,bb-uvolt", &num) == 0) 942 pdata->bb_uvolt = num; 943 if (of_property_read_u32(np, "ti,bb-uamp", &num) == 0) 944 pdata->bb_uamp = num; 945 return pdata; 946} 947#else 948static inline const struct twl4030_bci_platform_data * 949twl4030_bci_parse_dt(struct device *dev) 950{ 951 return NULL; 952} 953#endif 954 955static const struct power_supply_desc twl4030_bci_ac_desc = { 956 .name = "twl4030_ac", 957 .type = POWER_SUPPLY_TYPE_MAINS, 958 .properties = twl4030_charger_props, 959 .num_properties = ARRAY_SIZE(twl4030_charger_props), 960 .get_property = twl4030_bci_get_property, 961 .set_property = twl4030_bci_set_property, 962 .property_is_writeable = twl4030_bci_property_is_writeable, 963}; 964 965static const struct power_supply_desc twl4030_bci_usb_desc = { 966 .name = "twl4030_usb", 967 .type = POWER_SUPPLY_TYPE_USB, 968 .properties = twl4030_charger_props, 969 .num_properties = ARRAY_SIZE(twl4030_charger_props), 970 .get_property = twl4030_bci_get_property, 971 .set_property = twl4030_bci_set_property, 972 .property_is_writeable = twl4030_bci_property_is_writeable, 973}; 974 975static int twl4030_bci_probe(struct platform_device *pdev) 976{ 977 struct twl4030_bci *bci; 978 const struct twl4030_bci_platform_data *pdata = pdev->dev.platform_data; 979 int ret; 980 u32 reg; 981 982 bci = devm_kzalloc(&pdev->dev, sizeof(*bci), GFP_KERNEL); 983 if (bci == NULL) 984 return -ENOMEM; 985 986 if (!pdata) 987 pdata = twl4030_bci_parse_dt(&pdev->dev); 988 989 bci->ichg_eoc = 80100; /* Stop charging when current drops to here */ 990 bci->ichg_lo = 241000; /* Low threshold */ 991 bci->ichg_hi = 500000; /* High threshold */ 992 bci->ac_cur = 500000; /* 500mA */ 993 if (allow_usb) 994 bci->usb_cur_target = 500000; /* 500mA */ 995 else 996 bci->usb_cur_target = 100000; /* 100mA */ 997 bci->usb_mode = CHARGE_AUTO; 998 bci->ac_mode = CHARGE_AUTO; 999 1000 bci->dev = &pdev->dev; 1001 bci->irq_chg = platform_get_irq(pdev, 0); 1002 bci->irq_bci = platform_get_irq(pdev, 1); 1003 1004 platform_set_drvdata(pdev, bci); 1005 1006 INIT_WORK(&bci->work, twl4030_bci_usb_work); 1007 INIT_DELAYED_WORK(&bci->current_worker, twl4030_current_worker); 1008 1009 bci->channel_vac = devm_iio_channel_get(&pdev->dev, "vac"); 1010 if (IS_ERR(bci->channel_vac)) { 1011 ret = PTR_ERR(bci->channel_vac); 1012 if (ret == -EPROBE_DEFER) 1013 return ret; /* iio not ready */ 1014 dev_warn(&pdev->dev, "could not request vac iio channel (%d)", 1015 ret); 1016 bci->channel_vac = NULL; 1017 } 1018 1019 if (bci->dev->of_node) { 1020 struct device_node *phynode; 1021 1022 phynode = of_get_compatible_child(bci->dev->of_node->parent, 1023 "ti,twl4030-usb"); 1024 if (phynode) { 1025 bci->usb_nb.notifier_call = twl4030_bci_usb_ncb; 1026 bci->transceiver = devm_usb_get_phy_by_node( 1027 bci->dev, phynode, &bci->usb_nb); 1028 of_node_put(phynode); 1029 if (IS_ERR(bci->transceiver)) { 1030 ret = PTR_ERR(bci->transceiver); 1031 if (ret == -EPROBE_DEFER) 1032 return ret; /* phy not ready */ 1033 dev_warn(&pdev->dev, "could not request transceiver (%d)", 1034 ret); 1035 bci->transceiver = NULL; 1036 } 1037 } 1038 } 1039 1040 bci->ac = devm_power_supply_register(&pdev->dev, &twl4030_bci_ac_desc, 1041 NULL); 1042 if (IS_ERR(bci->ac)) { 1043 ret = PTR_ERR(bci->ac); 1044 dev_err(&pdev->dev, "failed to register ac: %d\n", ret); 1045 return ret; 1046 } 1047 1048 bci->usb = devm_power_supply_register(&pdev->dev, &twl4030_bci_usb_desc, 1049 NULL); 1050 if (IS_ERR(bci->usb)) { 1051 ret = PTR_ERR(bci->usb); 1052 dev_err(&pdev->dev, "failed to register usb: %d\n", ret); 1053 return ret; 1054 } 1055 1056 ret = devm_request_threaded_irq(&pdev->dev, bci->irq_chg, NULL, 1057 twl4030_charger_interrupt, IRQF_ONESHOT, pdev->name, 1058 bci); 1059 if (ret < 0) { 1060 dev_err(&pdev->dev, "could not request irq %d, status %d\n", 1061 bci->irq_chg, ret); 1062 return ret; 1063 } 1064 1065 ret = devm_request_threaded_irq(&pdev->dev, bci->irq_bci, NULL, 1066 twl4030_bci_interrupt, IRQF_ONESHOT, pdev->name, bci); 1067 if (ret < 0) { 1068 dev_err(&pdev->dev, "could not request irq %d, status %d\n", 1069 bci->irq_bci, ret); 1070 return ret; 1071 } 1072 1073 /* Enable interrupts now. */ 1074 reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC | TWL4030_TBATOR2 | 1075 TWL4030_TBATOR1 | TWL4030_BATSTS); 1076 ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg, 1077 TWL4030_INTERRUPTS_BCIIMR1A); 1078 if (ret < 0) { 1079 dev_err(&pdev->dev, "failed to unmask interrupts: %d\n", ret); 1080 return ret; 1081 } 1082 1083 reg = ~(u32)(TWL4030_VBATOV | TWL4030_VBUSOV | TWL4030_ACCHGOV); 1084 ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg, 1085 TWL4030_INTERRUPTS_BCIIMR2A); 1086 if (ret < 0) 1087 dev_warn(&pdev->dev, "failed to unmask interrupts: %d\n", ret); 1088 1089 twl4030_charger_update_current(bci); 1090 if (device_create_file(&bci->usb->dev, &dev_attr_mode)) 1091 dev_warn(&pdev->dev, "could not create sysfs file\n"); 1092 if (device_create_file(&bci->ac->dev, &dev_attr_mode)) 1093 dev_warn(&pdev->dev, "could not create sysfs file\n"); 1094 1095 twl4030_charger_enable_ac(bci, true); 1096 if (!IS_ERR_OR_NULL(bci->transceiver)) 1097 twl4030_bci_usb_ncb(&bci->usb_nb, 1098 bci->transceiver->last_event, 1099 NULL); 1100 else 1101 twl4030_charger_enable_usb(bci, false); 1102 if (pdata) 1103 twl4030_charger_enable_backup(pdata->bb_uvolt, 1104 pdata->bb_uamp); 1105 else 1106 twl4030_charger_enable_backup(0, 0); 1107 1108 return 0; 1109} 1110 1111static void twl4030_bci_remove(struct platform_device *pdev) 1112{ 1113 struct twl4030_bci *bci = platform_get_drvdata(pdev); 1114 1115 twl4030_charger_enable_ac(bci, false); 1116 twl4030_charger_enable_usb(bci, false); 1117 twl4030_charger_enable_backup(0, 0); 1118 1119 device_remove_file(&bci->usb->dev, &dev_attr_mode); 1120 device_remove_file(&bci->ac->dev, &dev_attr_mode); 1121 /* mask interrupts */ 1122 twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, 1123 TWL4030_INTERRUPTS_BCIIMR1A); 1124 twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, 1125 TWL4030_INTERRUPTS_BCIIMR2A); 1126} 1127 1128static const struct of_device_id twl_bci_of_match[] __maybe_unused = { 1129 {.compatible = "ti,twl4030-bci", }, 1130 { } 1131}; 1132MODULE_DEVICE_TABLE(of, twl_bci_of_match); 1133 1134static struct platform_driver twl4030_bci_driver = { 1135 .probe = twl4030_bci_probe, 1136 .remove_new = twl4030_bci_remove, 1137 .driver = { 1138 .name = "twl4030_bci", 1139 .of_match_table = of_match_ptr(twl_bci_of_match), 1140 }, 1141}; 1142module_platform_driver(twl4030_bci_driver); 1143 1144MODULE_AUTHOR("Gra��vydas Ignotas"); 1145MODULE_DESCRIPTION("TWL4030 Battery Charger Interface driver"); 1146MODULE_LICENSE("GPL"); 1147MODULE_ALIAS("platform:twl4030_bci"); 1148