1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Toggles a GPIO pin to power down a device
4 *
5 * Jamie Lentin <jm@lentin.co.uk>
6 * Andrew Lunn <andrew@lunn.ch>
7 *
8 * Copyright (C) 2012 Jamie Lentin
9 */
10#include <linux/kernel.h>
11#include <linux/init.h>
12#include <linux/delay.h>
13#include <linux/platform_device.h>
14#include <linux/property.h>
15#include <linux/gpio/consumer.h>
16#include <linux/mod_devicetable.h>
17#include <linux/module.h>
18#include <linux/reboot.h>
19
20#define DEFAULT_TIMEOUT_MS 3000
21
22struct gpio_poweroff {
23	struct gpio_desc *reset_gpio;
24	u32 timeout_ms;
25	u32 active_delay_ms;
26	u32 inactive_delay_ms;
27};
28
29static int gpio_poweroff_do_poweroff(struct sys_off_data *data)
30{
31	struct gpio_poweroff *gpio_poweroff = data->cb_data;
32
33	/* drive it active, also inactive->active edge */
34	gpiod_direction_output(gpio_poweroff->reset_gpio, 1);
35	mdelay(gpio_poweroff->active_delay_ms);
36
37	/* drive inactive, also active->inactive edge */
38	gpiod_set_value_cansleep(gpio_poweroff->reset_gpio, 0);
39	mdelay(gpio_poweroff->inactive_delay_ms);
40
41	/* drive it active, also inactive->active edge */
42	gpiod_set_value_cansleep(gpio_poweroff->reset_gpio, 1);
43
44	/* give it some time */
45	mdelay(gpio_poweroff->timeout_ms);
46
47	WARN_ON(1);
48
49	return NOTIFY_DONE;
50}
51
52static int gpio_poweroff_probe(struct platform_device *pdev)
53{
54	struct gpio_poweroff *gpio_poweroff;
55	bool input = false;
56	enum gpiod_flags flags;
57	int priority = SYS_OFF_PRIO_DEFAULT;
58	int ret;
59
60	gpio_poweroff = devm_kzalloc(&pdev->dev, sizeof(*gpio_poweroff), GFP_KERNEL);
61	if (!gpio_poweroff)
62		return -ENOMEM;
63
64	input = device_property_read_bool(&pdev->dev, "input");
65	if (input)
66		flags = GPIOD_IN;
67	else
68		flags = GPIOD_OUT_LOW;
69
70
71	gpio_poweroff->active_delay_ms = 100;
72	gpio_poweroff->inactive_delay_ms = 100;
73	gpio_poweroff->timeout_ms = DEFAULT_TIMEOUT_MS;
74
75	device_property_read_u32(&pdev->dev, "active-delay-ms", &gpio_poweroff->active_delay_ms);
76	device_property_read_u32(&pdev->dev, "inactive-delay-ms",
77				 &gpio_poweroff->inactive_delay_ms);
78	device_property_read_u32(&pdev->dev, "timeout-ms", &gpio_poweroff->timeout_ms);
79	device_property_read_u32(&pdev->dev, "priority", &priority);
80	if (priority > 255) {
81		dev_err(&pdev->dev, "Invalid priority property: %u\n", priority);
82		return -EINVAL;
83	}
84
85	gpio_poweroff->reset_gpio = devm_gpiod_get(&pdev->dev, NULL, flags);
86	if (IS_ERR(gpio_poweroff->reset_gpio))
87		return PTR_ERR(gpio_poweroff->reset_gpio);
88
89	ret = devm_register_sys_off_handler(&pdev->dev, SYS_OFF_MODE_POWER_OFF,
90					    priority, gpio_poweroff_do_poweroff, gpio_poweroff);
91	if (ret)
92		return dev_err_probe(&pdev->dev, ret, "Cannot register poweroff handler\n");
93
94	return 0;
95}
96
97static const struct of_device_id of_gpio_poweroff_match[] = {
98	{ .compatible = "gpio-poweroff", },
99	{},
100};
101MODULE_DEVICE_TABLE(of, of_gpio_poweroff_match);
102
103static struct platform_driver gpio_poweroff_driver = {
104	.probe = gpio_poweroff_probe,
105	.driver = {
106		.name = "poweroff-gpio",
107		.of_match_table = of_gpio_poweroff_match,
108	},
109};
110
111module_platform_driver(gpio_poweroff_driver);
112
113MODULE_AUTHOR("Jamie Lentin <jm@lentin.co.uk>");
114MODULE_DESCRIPTION("GPIO poweroff driver");
115MODULE_ALIAS("platform:poweroff-gpio");
116