1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * This is a driver for the keyboard, touchpad and USB port of the 4 * keyboard dock for the Asus TF103C 2-in-1 tablet. 5 * 6 * This keyboard dock has its own I2C attached embedded controller 7 * and the keyboard and touchpad are also connected over I2C, 8 * instead of using the usual USB connection. This means that the 9 * keyboard dock requires this special driver to function. 10 * 11 * Copyright (C) 2021 Hans de Goede <hdegoede@redhat.com> 12 */ 13 14#include <linux/acpi.h> 15#include <linux/delay.h> 16#include <linux/dmi.h> 17#include <linux/gpio/consumer.h> 18#include <linux/gpio/machine.h> 19#include <linux/hid.h> 20#include <linux/i2c.h> 21#include <linux/input.h> 22#include <linux/irq.h> 23#include <linux/irqdomain.h> 24#include <linux/mod_devicetable.h> 25#include <linux/moduleparam.h> 26#include <linux/module.h> 27#include <linux/pm.h> 28#include <linux/workqueue.h> 29#include <asm/unaligned.h> 30 31static bool fnlock; 32module_param(fnlock, bool, 0644); 33MODULE_PARM_DESC(fnlock, 34 "By default the kbd toprow sends multimedia key presses. AltGr " 35 "can be pressed to change this to F1-F12. Set this to 1 to " 36 "change the default. Press AltGr + Esc to toggle at runtime."); 37 38#define TF103C_DOCK_DEV_NAME "NPCE69A:00" 39 40#define TF103C_DOCK_HPD_DEBOUNCE msecs_to_jiffies(20) 41 42/*** Touchpad I2C device defines ***/ 43#define TF103C_DOCK_TP_ADDR 0x15 44 45/*** Keyboard I2C device defines **A*/ 46#define TF103C_DOCK_KBD_ADDR 0x16 47 48#define TF103C_DOCK_KBD_DATA_REG 0x73 49#define TF103C_DOCK_KBD_DATA_MIN_LENGTH 4 50#define TF103C_DOCK_KBD_DATA_MAX_LENGTH 11 51#define TF103C_DOCK_KBD_DATA_MODIFIERS 3 52#define TF103C_DOCK_KBD_DATA_KEYS 5 53#define TF103C_DOCK_KBD_CMD_REG 0x75 54 55#define TF103C_DOCK_KBD_CMD_ENABLE 0x0800 56 57/*** EC innterrupt data I2C device defines ***/ 58#define TF103C_DOCK_INTR_ADDR 0x19 59#define TF103C_DOCK_INTR_DATA_REG 0x6a 60 61#define TF103C_DOCK_INTR_DATA1_OBF_MASK 0x01 62#define TF103C_DOCK_INTR_DATA1_KEY_MASK 0x04 63#define TF103C_DOCK_INTR_DATA1_KBC_MASK 0x08 64#define TF103C_DOCK_INTR_DATA1_AUX_MASK 0x20 65#define TF103C_DOCK_INTR_DATA1_SCI_MASK 0x40 66#define TF103C_DOCK_INTR_DATA1_SMI_MASK 0x80 67/* Special values for the OOB data on kbd_client / tp_client */ 68#define TF103C_DOCK_INTR_DATA1_OOB_VALUE 0xc1 69#define TF103C_DOCK_INTR_DATA2_OOB_VALUE 0x04 70 71#define TF103C_DOCK_SMI_AC_EVENT 0x31 72#define TF103C_DOCK_SMI_HANDSHAKING 0x50 73#define TF103C_DOCK_SMI_EC_WAKEUP 0x53 74#define TF103C_DOCK_SMI_BOOTBLOCK_RESET 0x5e 75#define TF103C_DOCK_SMI_WATCHDOG_RESET 0x5f 76#define TF103C_DOCK_SMI_ADAPTER_CHANGE 0x60 77#define TF103C_DOCK_SMI_DOCK_INSERT 0x61 78#define TF103C_DOCK_SMI_DOCK_REMOVE 0x62 79#define TF103C_DOCK_SMI_PAD_BL_CHANGE 0x63 80#define TF103C_DOCK_SMI_HID_STATUS_CHANGED 0x64 81#define TF103C_DOCK_SMI_HID_WAKEUP 0x65 82#define TF103C_DOCK_SMI_S3 0x83 83#define TF103C_DOCK_SMI_S5 0x85 84#define TF103C_DOCK_SMI_NOTIFY_SHUTDOWN 0x90 85#define TF103C_DOCK_SMI_RESUME 0x91 86 87/*** EC (dockram) I2C device defines ***/ 88#define TF103C_DOCK_EC_ADDR 0x1b 89 90#define TF103C_DOCK_EC_CMD_REG 0x0a 91#define TF103C_DOCK_EC_CMD_LEN 9 92 93enum { 94 TF103C_DOCK_FLAG_HID_OPEN, 95}; 96 97struct tf103c_dock_data { 98 struct delayed_work hpd_work; 99 struct irq_chip tp_irqchip; 100 struct irq_domain *tp_irq_domain; 101 struct i2c_client *ec_client; 102 struct i2c_client *intr_client; 103 struct i2c_client *kbd_client; 104 struct i2c_client *tp_client; 105 struct gpio_desc *pwr_en; 106 struct gpio_desc *irq_gpio; 107 struct gpio_desc *hpd_gpio; 108 struct input_dev *input; 109 struct hid_device *hid; 110 unsigned long flags; 111 int board_rev; 112 int irq; 113 int hpd_irq; 114 int tp_irq; 115 int last_press_0x13; 116 int last_press_0x14; 117 bool enabled; 118 bool tp_enabled; 119 bool altgr_pressed; 120 bool esc_pressed; 121 bool filter_esc; 122 u8 kbd_buf[TF103C_DOCK_KBD_DATA_MAX_LENGTH]; 123}; 124 125static struct gpiod_lookup_table tf103c_dock_gpios = { 126 .dev_id = "i2c-" TF103C_DOCK_DEV_NAME, 127 .table = { 128 GPIO_LOOKUP("INT33FC:00", 55, "dock_pwr_en", GPIO_ACTIVE_HIGH), 129 GPIO_LOOKUP("INT33FC:02", 1, "dock_irq", GPIO_ACTIVE_HIGH), 130 GPIO_LOOKUP("INT33FC:02", 29, "dock_hpd", GPIO_ACTIVE_HIGH), 131 GPIO_LOOKUP("gpio_crystalcove", 2, "board_rev", GPIO_ACTIVE_HIGH), 132 {} 133 }, 134}; 135 136/* Byte 0 is the length of the rest of the packet */ 137static const u8 tf103c_dock_enable_cmd[9] = { 8, 0x20, 0, 0, 0, 0, 0x20, 0, 0 }; 138static const u8 tf103c_dock_usb_enable_cmd[9] = { 8, 0, 0, 0, 0, 0, 0, 0x40, 0 }; 139static const u8 tf103c_dock_suspend_cmd[9] = { 8, 0, 0x20, 0, 0, 0x22, 0, 0, 0 }; 140 141/*** keyboard related code ***/ 142 143static u8 tf103c_dock_kbd_hid_desc[] = { 144 0x05, 0x01, /* Usage Page (Desktop), */ 145 0x09, 0x06, /* Usage (Keyboard), */ 146 0xA1, 0x01, /* Collection (Application), */ 147 0x85, 0x11, /* Report ID (17), */ 148 0x95, 0x08, /* Report Count (8), */ 149 0x75, 0x01, /* Report Size (1), */ 150 0x15, 0x00, /* Logical Minimum (0), */ 151 0x25, 0x01, /* Logical Maximum (1), */ 152 0x05, 0x07, /* Usage Page (Keyboard), */ 153 0x19, 0xE0, /* Usage Minimum (KB Leftcontrol), */ 154 0x29, 0xE7, /* Usage Maximum (KB Right GUI), */ 155 0x81, 0x02, /* Input (Variable), */ 156 0x95, 0x01, /* Report Count (1), */ 157 0x75, 0x08, /* Report Size (8), */ 158 0x81, 0x01, /* Input (Constant), */ 159 0x95, 0x06, /* Report Count (6), */ 160 0x75, 0x08, /* Report Size (8), */ 161 0x15, 0x00, /* Logical Minimum (0), */ 162 0x26, 0xFF, 0x00, /* Logical Maximum (255), */ 163 0x05, 0x07, /* Usage Page (Keyboard), */ 164 0x19, 0x00, /* Usage Minimum (None), */ 165 0x2A, 0xFF, 0x00, /* Usage Maximum (FFh), */ 166 0x81, 0x00, /* Input, */ 167 0xC0 /* End Collection */ 168}; 169 170static int tf103c_dock_kbd_read(struct tf103c_dock_data *dock) 171{ 172 struct i2c_client *client = dock->kbd_client; 173 struct device *dev = &dock->ec_client->dev; 174 struct i2c_msg msgs[2]; 175 u8 reg[2]; 176 int ret; 177 178 reg[0] = TF103C_DOCK_KBD_DATA_REG & 0xff; 179 reg[1] = TF103C_DOCK_KBD_DATA_REG >> 8; 180 181 msgs[0].addr = client->addr; 182 msgs[0].flags = 0; 183 msgs[0].len = sizeof(reg); 184 msgs[0].buf = reg; 185 186 msgs[1].addr = client->addr; 187 msgs[1].flags = I2C_M_RD; 188 msgs[1].len = TF103C_DOCK_KBD_DATA_MAX_LENGTH; 189 msgs[1].buf = dock->kbd_buf; 190 191 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); 192 if (ret != ARRAY_SIZE(msgs)) { 193 dev_err(dev, "error %d reading kbd data\n", ret); 194 return -EIO; 195 } 196 197 return 0; 198} 199 200static void tf103c_dock_kbd_write(struct tf103c_dock_data *dock, u16 cmd) 201{ 202 struct device *dev = &dock->ec_client->dev; 203 u8 buf[4]; 204 int ret; 205 206 put_unaligned_le16(TF103C_DOCK_KBD_CMD_REG, &buf[0]); 207 put_unaligned_le16(cmd, &buf[2]); 208 209 ret = i2c_master_send(dock->kbd_client, buf, sizeof(buf)); 210 if (ret != sizeof(buf)) 211 dev_err(dev, "error %d writing kbd cmd\n", ret); 212} 213 214/* HID ll_driver functions for forwarding input-reports from the kbd_client */ 215static int tf103c_dock_hid_parse(struct hid_device *hid) 216{ 217 return hid_parse_report(hid, tf103c_dock_kbd_hid_desc, 218 sizeof(tf103c_dock_kbd_hid_desc)); 219} 220 221static int tf103c_dock_hid_start(struct hid_device *hid) 222{ 223 return 0; 224} 225 226static void tf103c_dock_hid_stop(struct hid_device *hid) 227{ 228 hid->claimed = 0; 229} 230 231static int tf103c_dock_hid_open(struct hid_device *hid) 232{ 233 struct tf103c_dock_data *dock = hid->driver_data; 234 235 set_bit(TF103C_DOCK_FLAG_HID_OPEN, &dock->flags); 236 return 0; 237} 238 239static void tf103c_dock_hid_close(struct hid_device *hid) 240{ 241 struct tf103c_dock_data *dock = hid->driver_data; 242 243 clear_bit(TF103C_DOCK_FLAG_HID_OPEN, &dock->flags); 244} 245 246/* Mandatory, but not used */ 247static int tf103c_dock_hid_raw_request(struct hid_device *hid, u8 reportnum, 248 u8 *buf, size_t len, u8 rtype, int reqtype) 249{ 250 return 0; 251} 252 253static const struct hid_ll_driver tf103c_dock_hid_ll_driver = { 254 .parse = tf103c_dock_hid_parse, 255 .start = tf103c_dock_hid_start, 256 .stop = tf103c_dock_hid_stop, 257 .open = tf103c_dock_hid_open, 258 .close = tf103c_dock_hid_close, 259 .raw_request = tf103c_dock_hid_raw_request, 260}; 261 262static const int tf103c_dock_toprow_codes[13][2] = { 263 /* Normal, AltGr pressed */ 264 { KEY_POWER, KEY_F1 }, 265 { KEY_RFKILL, KEY_F2 }, 266 { KEY_F21, KEY_F3 }, /* Touchpad toggle, userspace expects F21 */ 267 { KEY_BRIGHTNESSDOWN, KEY_F4 }, 268 { KEY_BRIGHTNESSUP, KEY_F5 }, 269 { KEY_CAMERA, KEY_F6 }, 270 { KEY_CONFIG, KEY_F7 }, 271 { KEY_PREVIOUSSONG, KEY_F8 }, 272 { KEY_PLAYPAUSE, KEY_F9 }, 273 { KEY_NEXTSONG, KEY_F10 }, 274 { KEY_MUTE, KEY_F11 }, 275 { KEY_VOLUMEDOWN, KEY_F12 }, 276 { KEY_VOLUMEUP, KEY_SYSRQ }, 277}; 278 279static void tf103c_dock_report_toprow_kbd_hook(struct tf103c_dock_data *dock) 280{ 281 u8 *esc, *buf = dock->kbd_buf; 282 int size; 283 284 /* 285 * Stop AltGr reports from getting reported on the "Asus TF103C Dock 286 * Keyboard" input_dev, since this gets used as "Fn" key for the toprow 287 * keys. Instead we report this on the "Asus TF103C Dock Top Row Keys" 288 * input_dev, when not used to modify the toprow keys. 289 */ 290 dock->altgr_pressed = buf[TF103C_DOCK_KBD_DATA_MODIFIERS] & 0x40; 291 buf[TF103C_DOCK_KBD_DATA_MODIFIERS] &= ~0x40; 292 293 input_report_key(dock->input, KEY_RIGHTALT, dock->altgr_pressed); 294 input_sync(dock->input); 295 296 /* Toggle fnlock on AltGr + Esc press */ 297 buf = buf + TF103C_DOCK_KBD_DATA_KEYS; 298 size = TF103C_DOCK_KBD_DATA_MAX_LENGTH - TF103C_DOCK_KBD_DATA_KEYS; 299 esc = memchr(buf, 0x29, size); 300 if (!dock->esc_pressed && esc) { 301 if (dock->altgr_pressed) { 302 fnlock = !fnlock; 303 dock->filter_esc = true; 304 } 305 } 306 if (esc && dock->filter_esc) 307 *esc = 0; 308 else 309 dock->filter_esc = false; 310 311 dock->esc_pressed = esc != NULL; 312} 313 314static void tf103c_dock_toprow_press(struct tf103c_dock_data *dock, int key_code) 315{ 316 /* 317 * Release AltGr before reporting the toprow key, so that userspace 318 * sees e.g. just KEY_SUSPEND and not AltGr + KEY_SUSPEND. 319 */ 320 if (dock->altgr_pressed) { 321 input_report_key(dock->input, KEY_RIGHTALT, false); 322 input_sync(dock->input); 323 } 324 325 input_report_key(dock->input, key_code, true); 326 input_sync(dock->input); 327} 328 329static void tf103c_dock_toprow_release(struct tf103c_dock_data *dock, int key_code) 330{ 331 input_report_key(dock->input, key_code, false); 332 input_sync(dock->input); 333 334 if (dock->altgr_pressed) { 335 input_report_key(dock->input, KEY_RIGHTALT, true); 336 input_sync(dock->input); 337 } 338} 339 340static void tf103c_dock_toprow_event(struct tf103c_dock_data *dock, 341 int toprow_index, int *last_press) 342{ 343 int key_code, fn = dock->altgr_pressed ^ fnlock; 344 345 if (last_press && *last_press) { 346 tf103c_dock_toprow_release(dock, *last_press); 347 *last_press = 0; 348 } 349 350 if (toprow_index < 0) 351 return; 352 353 key_code = tf103c_dock_toprow_codes[toprow_index][fn]; 354 tf103c_dock_toprow_press(dock, key_code); 355 356 if (last_press) 357 *last_press = key_code; 358 else 359 tf103c_dock_toprow_release(dock, key_code); 360} 361 362/* 363 * The keyboard sends what appears to be standard I2C-HID input-reports, 364 * except that a 16 bit register address of where the I2C-HID format 365 * input-reports are stored must be send before reading it in a single 366 * (I2C repeated-start) I2C transaction. 367 * 368 * Its unknown how to get the HID descriptors but they are easy to reconstruct: 369 * 370 * Input report id 0x11 is 8 bytes long and contain standard USB HID intf-class, 371 * Boot Interface Subclass reports. 372 * Input report id 0x13 is 2 bytes long and sends Consumer Control events 373 * Input report id 0x14 is 1 byte long and sends System Control events 374 * 375 * However the top row keys (where a normal keyboard has F1-F12 + Print-Screen) 376 * are a mess, using a mix of the 0x13 and 0x14 input reports as well as EC SCI 377 * events; and these need special handling to allow actually sending F1-F12, 378 * since the Fn key on the keyboard only works on the cursor keys and the top 379 * row keys always send their special "Multimedia hotkey" codes. 380 * 381 * So only forward the 0x11 reports to HID and handle the top-row keys here. 382 */ 383static void tf103c_dock_kbd_interrupt(struct tf103c_dock_data *dock) 384{ 385 struct device *dev = &dock->ec_client->dev; 386 u8 *buf = dock->kbd_buf; 387 int size; 388 389 if (tf103c_dock_kbd_read(dock)) 390 return; 391 392 size = buf[0] | buf[1] << 8; 393 if (size < TF103C_DOCK_KBD_DATA_MIN_LENGTH || 394 size > TF103C_DOCK_KBD_DATA_MAX_LENGTH) { 395 dev_err(dev, "error reported kbd pkt size %d is out of range %d-%d\n", size, 396 TF103C_DOCK_KBD_DATA_MIN_LENGTH, 397 TF103C_DOCK_KBD_DATA_MAX_LENGTH); 398 return; 399 } 400 401 switch (buf[2]) { 402 case 0x11: 403 if (size != 11) 404 break; 405 406 tf103c_dock_report_toprow_kbd_hook(dock); 407 408 if (test_bit(TF103C_DOCK_FLAG_HID_OPEN, &dock->flags)) 409 hid_input_report(dock->hid, HID_INPUT_REPORT, buf + 2, size - 2, 1); 410 return; 411 case 0x13: 412 if (size != 5) 413 break; 414 415 switch (buf[3] | buf[4] << 8) { 416 case 0: 417 tf103c_dock_toprow_event(dock, -1, &dock->last_press_0x13); 418 return; 419 case 0x70: 420 tf103c_dock_toprow_event(dock, 3, &dock->last_press_0x13); 421 return; 422 case 0x6f: 423 tf103c_dock_toprow_event(dock, 4, &dock->last_press_0x13); 424 return; 425 case 0xb6: 426 tf103c_dock_toprow_event(dock, 7, &dock->last_press_0x13); 427 return; 428 case 0xcd: 429 tf103c_dock_toprow_event(dock, 8, &dock->last_press_0x13); 430 return; 431 case 0xb5: 432 tf103c_dock_toprow_event(dock, 9, &dock->last_press_0x13); 433 return; 434 case 0xe2: 435 tf103c_dock_toprow_event(dock, 10, &dock->last_press_0x13); 436 return; 437 case 0xea: 438 tf103c_dock_toprow_event(dock, 11, &dock->last_press_0x13); 439 return; 440 case 0xe9: 441 tf103c_dock_toprow_event(dock, 12, &dock->last_press_0x13); 442 return; 443 } 444 break; 445 case 0x14: 446 if (size != 4) 447 break; 448 449 switch (buf[3]) { 450 case 0: 451 tf103c_dock_toprow_event(dock, -1, &dock->last_press_0x14); 452 return; 453 case 1: 454 tf103c_dock_toprow_event(dock, 0, &dock->last_press_0x14); 455 return; 456 } 457 break; 458 } 459 460 dev_warn(dev, "warning unknown kbd data: %*ph\n", size, buf); 461} 462 463/*** touchpad related code ***/ 464 465static const struct property_entry tf103c_dock_touchpad_props[] = { 466 PROPERTY_ENTRY_BOOL("elan,clickpad"), 467 { } 468}; 469 470static const struct software_node tf103c_dock_touchpad_sw_node = { 471 .properties = tf103c_dock_touchpad_props, 472}; 473 474/* 475 * tf103c_enable_touchpad() is only called from the threaded interrupt handler 476 * and tf103c_disable_touchpad() is only called after the irq is disabled, 477 * so no locking is necessary. 478 */ 479static void tf103c_dock_enable_touchpad(struct tf103c_dock_data *dock) 480{ 481 struct i2c_board_info board_info = { }; 482 struct device *dev = &dock->ec_client->dev; 483 int ret; 484 485 if (dock->tp_enabled) { 486 /* Happens after resume, the tp needs to be reinitialized */ 487 ret = device_reprobe(&dock->tp_client->dev); 488 if (ret) 489 dev_err_probe(dev, ret, "reprobing tp-client\n"); 490 return; 491 } 492 493 strscpy(board_info.type, "elan_i2c", I2C_NAME_SIZE); 494 board_info.addr = TF103C_DOCK_TP_ADDR; 495 board_info.dev_name = TF103C_DOCK_DEV_NAME "-tp"; 496 board_info.irq = dock->tp_irq; 497 board_info.swnode = &tf103c_dock_touchpad_sw_node; 498 499 dock->tp_client = i2c_new_client_device(dock->ec_client->adapter, &board_info); 500 if (IS_ERR(dock->tp_client)) { 501 dev_err(dev, "error %ld creating tp client\n", PTR_ERR(dock->tp_client)); 502 return; 503 } 504 505 dock->tp_enabled = true; 506} 507 508static void tf103c_dock_disable_touchpad(struct tf103c_dock_data *dock) 509{ 510 if (!dock->tp_enabled) 511 return; 512 513 i2c_unregister_device(dock->tp_client); 514 515 dock->tp_enabled = false; 516} 517 518/*** interrupt handling code ***/ 519static void tf103c_dock_ec_cmd(struct tf103c_dock_data *dock, const u8 *cmd) 520{ 521 struct device *dev = &dock->ec_client->dev; 522 int ret; 523 524 ret = i2c_smbus_write_i2c_block_data(dock->ec_client, TF103C_DOCK_EC_CMD_REG, 525 TF103C_DOCK_EC_CMD_LEN, cmd); 526 if (ret) 527 dev_err(dev, "error %d sending %*ph cmd\n", ret, 528 TF103C_DOCK_EC_CMD_LEN, cmd); 529} 530 531static void tf103c_dock_sci(struct tf103c_dock_data *dock, u8 val) 532{ 533 struct device *dev = &dock->ec_client->dev; 534 535 switch (val) { 536 case 2: 537 tf103c_dock_toprow_event(dock, 1, NULL); 538 return; 539 case 4: 540 tf103c_dock_toprow_event(dock, 2, NULL); 541 return; 542 case 8: 543 tf103c_dock_toprow_event(dock, 5, NULL); 544 return; 545 case 17: 546 tf103c_dock_toprow_event(dock, 6, NULL); 547 return; 548 } 549 550 dev_warn(dev, "warning unknown SCI value: 0x%02x\n", val); 551} 552 553static void tf103c_dock_smi(struct tf103c_dock_data *dock, u8 val) 554{ 555 struct device *dev = &dock->ec_client->dev; 556 557 switch (val) { 558 case TF103C_DOCK_SMI_EC_WAKEUP: 559 tf103c_dock_ec_cmd(dock, tf103c_dock_enable_cmd); 560 tf103c_dock_ec_cmd(dock, tf103c_dock_usb_enable_cmd); 561 tf103c_dock_kbd_write(dock, TF103C_DOCK_KBD_CMD_ENABLE); 562 break; 563 case TF103C_DOCK_SMI_PAD_BL_CHANGE: 564 /* There is no backlight, but the EC still sends this */ 565 break; 566 case TF103C_DOCK_SMI_HID_STATUS_CHANGED: 567 tf103c_dock_enable_touchpad(dock); 568 break; 569 default: 570 dev_warn(dev, "warning unknown SMI value: 0x%02x\n", val); 571 break; 572 } 573} 574 575static irqreturn_t tf103c_dock_irq(int irq, void *data) 576{ 577 struct tf103c_dock_data *dock = data; 578 struct device *dev = &dock->ec_client->dev; 579 u8 intr_data[8]; 580 int ret; 581 582 ret = i2c_smbus_read_i2c_block_data(dock->intr_client, TF103C_DOCK_INTR_DATA_REG, 583 sizeof(intr_data), intr_data); 584 if (ret != sizeof(intr_data)) { 585 dev_err(dev, "error %d reading intr data\n", ret); 586 return IRQ_NONE; 587 } 588 589 if (!(intr_data[1] & TF103C_DOCK_INTR_DATA1_OBF_MASK)) 590 return IRQ_NONE; 591 592 /* intr_data[0] is the length of the rest of the packet */ 593 if (intr_data[0] == 3 && intr_data[1] == TF103C_DOCK_INTR_DATA1_OOB_VALUE && 594 intr_data[2] == TF103C_DOCK_INTR_DATA2_OOB_VALUE) { 595 /* intr_data[3] seems to contain a HID input report id */ 596 switch (intr_data[3]) { 597 case 0x01: 598 handle_nested_irq(dock->tp_irq); 599 break; 600 case 0x11: 601 case 0x13: 602 case 0x14: 603 tf103c_dock_kbd_interrupt(dock); 604 break; 605 default: 606 dev_warn(dev, "warning unknown intr_data[3]: 0x%02x\n", intr_data[3]); 607 break; 608 } 609 return IRQ_HANDLED; 610 } 611 612 if (intr_data[1] & TF103C_DOCK_INTR_DATA1_SCI_MASK) { 613 tf103c_dock_sci(dock, intr_data[2]); 614 return IRQ_HANDLED; 615 } 616 617 if (intr_data[1] & TF103C_DOCK_INTR_DATA1_SMI_MASK) { 618 tf103c_dock_smi(dock, intr_data[2]); 619 return IRQ_HANDLED; 620 } 621 622 dev_warn(dev, "warning unknown intr data: %*ph\n", 8, intr_data); 623 return IRQ_NONE; 624} 625 626/* 627 * tf103c_dock_[dis|en]able only run from hpd_work or at times when 628 * hpd_work cannot run (hpd_irq disabled), so no locking is necessary. 629 */ 630static void tf103c_dock_enable(struct tf103c_dock_data *dock) 631{ 632 if (dock->enabled) 633 return; 634 635 if (dock->board_rev != 2) 636 gpiod_set_value(dock->pwr_en, 1); 637 638 msleep(500); 639 enable_irq(dock->irq); 640 641 dock->enabled = true; 642} 643 644static void tf103c_dock_disable(struct tf103c_dock_data *dock) 645{ 646 if (!dock->enabled) 647 return; 648 649 disable_irq(dock->irq); 650 tf103c_dock_disable_touchpad(dock); 651 if (dock->board_rev != 2) 652 gpiod_set_value(dock->pwr_en, 0); 653 654 dock->enabled = false; 655} 656 657static void tf103c_dock_hpd_work(struct work_struct *work) 658{ 659 struct tf103c_dock_data *dock = 660 container_of(work, struct tf103c_dock_data, hpd_work.work); 661 662 if (gpiod_get_value(dock->hpd_gpio)) 663 tf103c_dock_enable(dock); 664 else 665 tf103c_dock_disable(dock); 666} 667 668static irqreturn_t tf103c_dock_hpd_irq(int irq, void *data) 669{ 670 struct tf103c_dock_data *dock = data; 671 672 mod_delayed_work(system_long_wq, &dock->hpd_work, TF103C_DOCK_HPD_DEBOUNCE); 673 return IRQ_HANDLED; 674} 675 676static void tf103c_dock_start_hpd(struct tf103c_dock_data *dock) 677{ 678 enable_irq(dock->hpd_irq); 679 /* Sync current HPD status */ 680 queue_delayed_work(system_long_wq, &dock->hpd_work, TF103C_DOCK_HPD_DEBOUNCE); 681} 682 683static void tf103c_dock_stop_hpd(struct tf103c_dock_data *dock) 684{ 685 disable_irq(dock->hpd_irq); 686 cancel_delayed_work_sync(&dock->hpd_work); 687} 688 689/*** probe ***/ 690 691static const struct dmi_system_id tf103c_dock_dmi_ids[] = { 692 { 693 .matches = { 694 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), 695 DMI_MATCH(DMI_PRODUCT_NAME, "TF103C"), 696 }, 697 }, 698 { } 699}; 700 701static void tf103c_dock_non_devm_cleanup(void *data) 702{ 703 struct tf103c_dock_data *dock = data; 704 705 if (dock->tp_irq_domain) 706 irq_domain_remove(dock->tp_irq_domain); 707 708 if (!IS_ERR_OR_NULL(dock->hid)) 709 hid_destroy_device(dock->hid); 710 711 i2c_unregister_device(dock->kbd_client); 712 i2c_unregister_device(dock->intr_client); 713 gpiod_remove_lookup_table(&tf103c_dock_gpios); 714} 715 716static int tf103c_dock_probe(struct i2c_client *client) 717{ 718 struct i2c_board_info board_info = { }; 719 struct device *dev = &client->dev; 720 struct gpio_desc *board_rev_gpio; 721 struct tf103c_dock_data *dock; 722 enum gpiod_flags flags; 723 int i, ret; 724 725 /* GPIOs are hardcoded for the Asus TF103C, don't bind on other devs */ 726 if (!dmi_check_system(tf103c_dock_dmi_ids)) 727 return -ENODEV; 728 729 dock = devm_kzalloc(dev, sizeof(*dock), GFP_KERNEL); 730 if (!dock) 731 return -ENOMEM; 732 733 INIT_DELAYED_WORK(&dock->hpd_work, tf103c_dock_hpd_work); 734 735 /* 1. Get GPIOs and their IRQs */ 736 gpiod_add_lookup_table(&tf103c_dock_gpios); 737 738 ret = devm_add_action_or_reset(dev, tf103c_dock_non_devm_cleanup, dock); 739 if (ret) 740 return ret; 741 742 /* 743 * The pin is configured as input by default, use ASIS because otherwise 744 * the gpio-crystalcove.c switches off the internal pull-down replacing 745 * it with a pull-up. 746 */ 747 board_rev_gpio = gpiod_get(dev, "board_rev", GPIOD_ASIS); 748 if (IS_ERR(board_rev_gpio)) 749 return dev_err_probe(dev, PTR_ERR(board_rev_gpio), "requesting board_rev GPIO\n"); 750 dock->board_rev = gpiod_get_value_cansleep(board_rev_gpio) + 1; 751 gpiod_put(board_rev_gpio); 752 753 /* 754 * The Android driver drives the dock-pwr-en pin high at probe for 755 * revision 2 boards and then never touches it again? 756 * This code has only been tested on a revision 1 board, so for now 757 * just mimick what Android does on revision 2 boards. 758 */ 759 flags = (dock->board_rev == 2) ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; 760 dock->pwr_en = devm_gpiod_get(dev, "dock_pwr_en", flags); 761 if (IS_ERR(dock->pwr_en)) 762 return dev_err_probe(dev, PTR_ERR(dock->pwr_en), "requesting pwr_en GPIO\n"); 763 764 dock->irq_gpio = devm_gpiod_get(dev, "dock_irq", GPIOD_IN); 765 if (IS_ERR(dock->irq_gpio)) 766 return dev_err_probe(dev, PTR_ERR(dock->irq_gpio), "requesting IRQ GPIO\n"); 767 768 dock->irq = gpiod_to_irq(dock->irq_gpio); 769 if (dock->irq < 0) 770 return dev_err_probe(dev, dock->irq, "getting dock IRQ"); 771 772 ret = devm_request_threaded_irq(dev, dock->irq, NULL, tf103c_dock_irq, 773 IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_NO_AUTOEN, 774 "dock_irq", dock); 775 if (ret) 776 return dev_err_probe(dev, ret, "requesting dock IRQ"); 777 778 dock->hpd_gpio = devm_gpiod_get(dev, "dock_hpd", GPIOD_IN); 779 if (IS_ERR(dock->hpd_gpio)) 780 return dev_err_probe(dev, PTR_ERR(dock->hpd_gpio), "requesting HPD GPIO\n"); 781 782 dock->hpd_irq = gpiod_to_irq(dock->hpd_gpio); 783 if (dock->hpd_irq < 0) 784 return dev_err_probe(dev, dock->hpd_irq, "getting HPD IRQ"); 785 786 ret = devm_request_irq(dev, dock->hpd_irq, tf103c_dock_hpd_irq, 787 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_NO_AUTOEN, 788 "dock_hpd", dock); 789 if (ret) 790 return ret; 791 792 /* 793 * 2. Create I2C clients. The dock uses 4 different i2c addresses, 794 * the ACPI NPCE69A node being probed points to the EC address. 795 */ 796 dock->ec_client = client; 797 798 strscpy(board_info.type, "tf103c-dock-intr", I2C_NAME_SIZE); 799 board_info.addr = TF103C_DOCK_INTR_ADDR; 800 board_info.dev_name = TF103C_DOCK_DEV_NAME "-intr"; 801 802 dock->intr_client = i2c_new_client_device(client->adapter, &board_info); 803 if (IS_ERR(dock->intr_client)) 804 return dev_err_probe(dev, PTR_ERR(dock->intr_client), "creating intr client\n"); 805 806 strscpy(board_info.type, "tf103c-dock-kbd", I2C_NAME_SIZE); 807 board_info.addr = TF103C_DOCK_KBD_ADDR; 808 board_info.dev_name = TF103C_DOCK_DEV_NAME "-kbd"; 809 810 dock->kbd_client = i2c_new_client_device(client->adapter, &board_info); 811 if (IS_ERR(dock->kbd_client)) 812 return dev_err_probe(dev, PTR_ERR(dock->kbd_client), "creating kbd client\n"); 813 814 /* 3. Create input_dev for the top row of the keyboard */ 815 dock->input = devm_input_allocate_device(dev); 816 if (!dock->input) 817 return -ENOMEM; 818 819 dock->input->name = "Asus TF103C Dock Top Row Keys"; 820 dock->input->phys = dev_name(dev); 821 dock->input->dev.parent = dev; 822 dock->input->id.bustype = BUS_I2C; 823 dock->input->id.vendor = /* USB_VENDOR_ID_ASUSTEK */ 824 dock->input->id.product = /* From TF-103-C */ 825 dock->input->id.version = 0x0100; /* 1.0 */ 826 827 for (i = 0; i < ARRAY_SIZE(tf103c_dock_toprow_codes); i++) { 828 input_set_capability(dock->input, EV_KEY, tf103c_dock_toprow_codes[i][0]); 829 input_set_capability(dock->input, EV_KEY, tf103c_dock_toprow_codes[i][1]); 830 } 831 input_set_capability(dock->input, EV_KEY, KEY_RIGHTALT); 832 833 ret = input_register_device(dock->input); 834 if (ret) 835 return ret; 836 837 /* 4. Create HID device for the keyboard */ 838 dock->hid = hid_allocate_device(); 839 if (IS_ERR(dock->hid)) 840 return dev_err_probe(dev, PTR_ERR(dock->hid), "allocating hid dev\n"); 841 842 dock->hid->driver_data = dock; 843 dock->hid->ll_driver = &tf103c_dock_hid_ll_driver; 844 dock->hid->dev.parent = &client->dev; 845 dock->hid->bus = BUS_I2C; 846 dock->hid->vendor = 0x0b05; /* USB_VENDOR_ID_ASUSTEK */ 847 dock->hid->product = 0x0103; /* From TF-103-C */ 848 dock->hid->version = 0x0100; /* 1.0 */ 849 strscpy(dock->hid->name, "Asus TF103C Dock Keyboard", sizeof(dock->hid->name)); 850 strscpy(dock->hid->phys, dev_name(dev), sizeof(dock->hid->phys)); 851 852 ret = hid_add_device(dock->hid); 853 if (ret) 854 return dev_err_probe(dev, ret, "adding hid dev\n"); 855 856 /* 5. Setup irqchip for touchpad IRQ pass-through */ 857 dock->tp_irqchip.name = KBUILD_MODNAME; 858 859 dock->tp_irq_domain = irq_domain_add_linear(NULL, 1, &irq_domain_simple_ops, NULL); 860 if (!dock->tp_irq_domain) 861 return -ENOMEM; 862 863 dock->tp_irq = irq_create_mapping(dock->tp_irq_domain, 0); 864 if (!dock->tp_irq) 865 return -ENOMEM; 866 867 irq_set_chip_data(dock->tp_irq, dock); 868 irq_set_chip_and_handler(dock->tp_irq, &dock->tp_irqchip, handle_simple_irq); 869 irq_set_nested_thread(dock->tp_irq, true); 870 irq_set_noprobe(dock->tp_irq); 871 872 dev_info(dev, "Asus TF103C board-revision: %d\n", dock->board_rev); 873 874 tf103c_dock_start_hpd(dock); 875 876 device_init_wakeup(dev, true); 877 i2c_set_clientdata(client, dock); 878 return 0; 879} 880 881static void tf103c_dock_remove(struct i2c_client *client) 882{ 883 struct tf103c_dock_data *dock = i2c_get_clientdata(client); 884 885 tf103c_dock_stop_hpd(dock); 886 tf103c_dock_disable(dock); 887} 888 889static int __maybe_unused tf103c_dock_suspend(struct device *dev) 890{ 891 struct tf103c_dock_data *dock = dev_get_drvdata(dev); 892 893 tf103c_dock_stop_hpd(dock); 894 895 if (dock->enabled) { 896 tf103c_dock_ec_cmd(dock, tf103c_dock_suspend_cmd); 897 898 if (device_may_wakeup(dev)) 899 enable_irq_wake(dock->irq); 900 } 901 902 return 0; 903} 904 905static int __maybe_unused tf103c_dock_resume(struct device *dev) 906{ 907 struct tf103c_dock_data *dock = dev_get_drvdata(dev); 908 909 if (dock->enabled) { 910 if (device_may_wakeup(dev)) 911 disable_irq_wake(dock->irq); 912 913 /* Don't try to resume if the dock was unplugged during suspend */ 914 if (gpiod_get_value(dock->hpd_gpio)) 915 tf103c_dock_ec_cmd(dock, tf103c_dock_enable_cmd); 916 } 917 918 tf103c_dock_start_hpd(dock); 919 return 0; 920} 921 922static SIMPLE_DEV_PM_OPS(tf103c_dock_pm_ops, tf103c_dock_suspend, tf103c_dock_resume); 923 924static const struct acpi_device_id tf103c_dock_acpi_match[] = { 925 {"NPCE69A"}, 926 { } 927}; 928MODULE_DEVICE_TABLE(acpi, tf103c_dock_acpi_match); 929 930static struct i2c_driver tf103c_dock_driver = { 931 .driver = { 932 .name = "asus-tf103c-dock", 933 .pm = &tf103c_dock_pm_ops, 934 .acpi_match_table = tf103c_dock_acpi_match, 935 }, 936 .probe = tf103c_dock_probe, 937 .remove = tf103c_dock_remove, 938}; 939module_i2c_driver(tf103c_dock_driver); 940 941MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com"); 942MODULE_DESCRIPTION("X86 Android tablets DSDT fixups driver"); 943MODULE_LICENSE("GPL"); 944