1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * IBM Hot Plug Controller Driver 4 * 5 * Written By: Chuck Cole, Jyoti Shah, Tong Yu, Irene Zubarev, IBM Corporation 6 * 7 * Copyright (C) 2001,2003 Greg Kroah-Hartman (greg@kroah.com) 8 * Copyright (C) 2001-2003 IBM Corp. 9 * 10 * All rights reserved. 11 * 12 * Send feedback to <gregkh@us.ibm.com> 13 * 14 */ 15 16#include <linux/init.h> 17#include <linux/module.h> 18#include <linux/slab.h> 19#include <linux/pci.h> 20#include <linux/interrupt.h> 21#include <linux/delay.h> 22#include <linux/wait.h> 23#include "../pci.h" 24#include <asm/pci_x86.h> /* for struct irq_routing_table */ 25#include <asm/io_apic.h> 26#include "ibmphp.h" 27 28#define attn_on(sl) ibmphp_hpc_writeslot(sl, HPC_SLOT_ATTNON) 29#define attn_off(sl) ibmphp_hpc_writeslot(sl, HPC_SLOT_ATTNOFF) 30#define attn_LED_blink(sl) ibmphp_hpc_writeslot(sl, HPC_SLOT_BLINKLED) 31#define get_ctrl_revision(sl, rev) ibmphp_hpc_readslot(sl, READ_REVLEVEL, rev) 32#define get_hpc_options(sl, opt) ibmphp_hpc_readslot(sl, READ_HPCOPTIONS, opt) 33 34#define DRIVER_VERSION "0.6" 35#define DRIVER_DESC "IBM Hot Plug PCI Controller Driver" 36 37int ibmphp_debug; 38 39static bool debug; 40module_param(debug, bool, S_IRUGO | S_IWUSR); 41MODULE_PARM_DESC(debug, "Debugging mode enabled or not"); 42MODULE_LICENSE("GPL"); 43MODULE_DESCRIPTION(DRIVER_DESC); 44 45struct pci_bus *ibmphp_pci_bus; 46static int max_slots; 47 48static int irqs[16]; /* PIC mode IRQs we're using so far (in case MPS 49 * tables don't provide default info for empty slots */ 50 51static int init_flag; 52 53static inline int get_cur_bus_info(struct slot **sl) 54{ 55 int rc = 1; 56 struct slot *slot_cur = *sl; 57 58 debug("options = %x\n", slot_cur->ctrl->options); 59 debug("revision = %x\n", slot_cur->ctrl->revision); 60 61 if (READ_BUS_STATUS(slot_cur->ctrl)) 62 rc = ibmphp_hpc_readslot(slot_cur, READ_BUSSTATUS, NULL); 63 64 if (rc) 65 return rc; 66 67 slot_cur->bus_on->current_speed = CURRENT_BUS_SPEED(slot_cur->busstatus); 68 if (READ_BUS_MODE(slot_cur->ctrl)) 69 slot_cur->bus_on->current_bus_mode = 70 CURRENT_BUS_MODE(slot_cur->busstatus); 71 else 72 slot_cur->bus_on->current_bus_mode = 0xFF; 73 74 debug("busstatus = %x, bus_speed = %x, bus_mode = %x\n", 75 slot_cur->busstatus, 76 slot_cur->bus_on->current_speed, 77 slot_cur->bus_on->current_bus_mode); 78 79 *sl = slot_cur; 80 return 0; 81} 82 83static inline int slot_update(struct slot **sl) 84{ 85 int rc; 86 rc = ibmphp_hpc_readslot(*sl, READ_ALLSTAT, NULL); 87 if (rc) 88 return rc; 89 if (!init_flag) 90 rc = get_cur_bus_info(sl); 91 return rc; 92} 93 94static int __init get_max_slots(void) 95{ 96 struct slot *slot_cur; 97 u8 slot_count = 0; 98 99 list_for_each_entry(slot_cur, &ibmphp_slot_head, ibm_slot_list) { 100 /* sometimes the hot-pluggable slots start with 4 (not always from 1) */ 101 slot_count = max(slot_count, slot_cur->number); 102 } 103 return slot_count; 104} 105 106/* This routine will put the correct slot->device information per slot. It's 107 * called from initialization of the slot structures. It will also assign 108 * interrupt numbers per each slot. 109 * Parameters: struct slot 110 * Returns 0 or errors 111 */ 112int ibmphp_init_devno(struct slot **cur_slot) 113{ 114 struct irq_routing_table *rtable; 115 int len; 116 int loop; 117 int i; 118 119 rtable = pcibios_get_irq_routing_table(); 120 if (!rtable) { 121 err("no BIOS routing table...\n"); 122 return -ENOMEM; 123 } 124 125 len = (rtable->size - sizeof(struct irq_routing_table)) / 126 sizeof(struct irq_info); 127 128 if (!len) { 129 kfree(rtable); 130 return -1; 131 } 132 for (loop = 0; loop < len; loop++) { 133 if ((*cur_slot)->number == rtable->slots[loop].slot && 134 (*cur_slot)->bus == rtable->slots[loop].bus) { 135 (*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn); 136 for (i = 0; i < 4; i++) 137 (*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus, 138 (int) (*cur_slot)->device, i); 139 140 debug("(*cur_slot)->irq[0] = %x\n", 141 (*cur_slot)->irq[0]); 142 debug("(*cur_slot)->irq[1] = %x\n", 143 (*cur_slot)->irq[1]); 144 debug("(*cur_slot)->irq[2] = %x\n", 145 (*cur_slot)->irq[2]); 146 debug("(*cur_slot)->irq[3] = %x\n", 147 (*cur_slot)->irq[3]); 148 149 debug("rtable->exclusive_irqs = %x\n", 150 rtable->exclusive_irqs); 151 debug("rtable->slots[loop].irq[0].bitmap = %x\n", 152 rtable->slots[loop].irq[0].bitmap); 153 debug("rtable->slots[loop].irq[1].bitmap = %x\n", 154 rtable->slots[loop].irq[1].bitmap); 155 debug("rtable->slots[loop].irq[2].bitmap = %x\n", 156 rtable->slots[loop].irq[2].bitmap); 157 debug("rtable->slots[loop].irq[3].bitmap = %x\n", 158 rtable->slots[loop].irq[3].bitmap); 159 160 debug("rtable->slots[loop].irq[0].link = %x\n", 161 rtable->slots[loop].irq[0].link); 162 debug("rtable->slots[loop].irq[1].link = %x\n", 163 rtable->slots[loop].irq[1].link); 164 debug("rtable->slots[loop].irq[2].link = %x\n", 165 rtable->slots[loop].irq[2].link); 166 debug("rtable->slots[loop].irq[3].link = %x\n", 167 rtable->slots[loop].irq[3].link); 168 debug("end of init_devno\n"); 169 kfree(rtable); 170 return 0; 171 } 172 } 173 174 kfree(rtable); 175 return -1; 176} 177 178static inline int power_on(struct slot *slot_cur) 179{ 180 u8 cmd = HPC_SLOT_ON; 181 int retval; 182 183 retval = ibmphp_hpc_writeslot(slot_cur, cmd); 184 if (retval) { 185 err("power on failed\n"); 186 return retval; 187 } 188 if (CTLR_RESULT(slot_cur->ctrl->status)) { 189 err("command not completed successfully in power_on\n"); 190 return -EIO; 191 } 192 msleep(3000); /* For ServeRAID cards, and some 66 PCI */ 193 return 0; 194} 195 196static inline int power_off(struct slot *slot_cur) 197{ 198 u8 cmd = HPC_SLOT_OFF; 199 int retval; 200 201 retval = ibmphp_hpc_writeslot(slot_cur, cmd); 202 if (retval) { 203 err("power off failed\n"); 204 return retval; 205 } 206 if (CTLR_RESULT(slot_cur->ctrl->status)) { 207 err("command not completed successfully in power_off\n"); 208 retval = -EIO; 209 } 210 return retval; 211} 212 213static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 value) 214{ 215 int rc = 0; 216 struct slot *pslot; 217 u8 cmd = 0x00; /* avoid compiler warning */ 218 219 debug("set_attention_status - Entry hotplug_slot[%lx] value[%x]\n", 220 (ulong) hotplug_slot, value); 221 ibmphp_lock_operations(); 222 223 224 if (hotplug_slot) { 225 switch (value) { 226 case HPC_SLOT_ATTN_OFF: 227 cmd = HPC_SLOT_ATTNOFF; 228 break; 229 case HPC_SLOT_ATTN_ON: 230 cmd = HPC_SLOT_ATTNON; 231 break; 232 case HPC_SLOT_ATTN_BLINK: 233 cmd = HPC_SLOT_BLINKLED; 234 break; 235 default: 236 rc = -ENODEV; 237 err("set_attention_status - Error : invalid input [%x]\n", 238 value); 239 break; 240 } 241 if (rc == 0) { 242 pslot = to_slot(hotplug_slot); 243 rc = ibmphp_hpc_writeslot(pslot, cmd); 244 } 245 } else 246 rc = -ENODEV; 247 248 ibmphp_unlock_operations(); 249 250 debug("set_attention_status - Exit rc[%d]\n", rc); 251 return rc; 252} 253 254static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value) 255{ 256 int rc = -ENODEV; 257 struct slot *pslot; 258 struct slot myslot; 259 260 debug("get_attention_status - Entry hotplug_slot[%lx] pvalue[%lx]\n", 261 (ulong) hotplug_slot, (ulong) value); 262 263 ibmphp_lock_operations(); 264 if (hotplug_slot) { 265 pslot = to_slot(hotplug_slot); 266 memcpy(&myslot, pslot, sizeof(struct slot)); 267 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS, 268 &myslot.status); 269 if (!rc) 270 rc = ibmphp_hpc_readslot(pslot, READ_EXTSLOTSTATUS, 271 &myslot.ext_status); 272 if (!rc) 273 *value = SLOT_ATTN(myslot.status, myslot.ext_status); 274 } 275 276 ibmphp_unlock_operations(); 277 debug("get_attention_status - Exit rc[%d] value[%x]\n", rc, *value); 278 return rc; 279} 280 281static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value) 282{ 283 int rc = -ENODEV; 284 struct slot *pslot; 285 struct slot myslot; 286 287 debug("get_latch_status - Entry hotplug_slot[%lx] pvalue[%lx]\n", 288 (ulong) hotplug_slot, (ulong) value); 289 ibmphp_lock_operations(); 290 if (hotplug_slot) { 291 pslot = to_slot(hotplug_slot); 292 memcpy(&myslot, pslot, sizeof(struct slot)); 293 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS, 294 &myslot.status); 295 if (!rc) 296 *value = SLOT_LATCH(myslot.status); 297 } 298 299 ibmphp_unlock_operations(); 300 debug("get_latch_status - Exit rc[%d] rc[%x] value[%x]\n", 301 rc, rc, *value); 302 return rc; 303} 304 305 306static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) 307{ 308 int rc = -ENODEV; 309 struct slot *pslot; 310 struct slot myslot; 311 312 debug("get_power_status - Entry hotplug_slot[%lx] pvalue[%lx]\n", 313 (ulong) hotplug_slot, (ulong) value); 314 ibmphp_lock_operations(); 315 if (hotplug_slot) { 316 pslot = to_slot(hotplug_slot); 317 memcpy(&myslot, pslot, sizeof(struct slot)); 318 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS, 319 &myslot.status); 320 if (!rc) 321 *value = SLOT_PWRGD(myslot.status); 322 } 323 324 ibmphp_unlock_operations(); 325 debug("get_power_status - Exit rc[%d] rc[%x] value[%x]\n", 326 rc, rc, *value); 327 return rc; 328} 329 330static int get_adapter_present(struct hotplug_slot *hotplug_slot, u8 *value) 331{ 332 int rc = -ENODEV; 333 struct slot *pslot; 334 u8 present; 335 struct slot myslot; 336 337 debug("get_adapter_status - Entry hotplug_slot[%lx] pvalue[%lx]\n", 338 (ulong) hotplug_slot, (ulong) value); 339 ibmphp_lock_operations(); 340 if (hotplug_slot) { 341 pslot = to_slot(hotplug_slot); 342 memcpy(&myslot, pslot, sizeof(struct slot)); 343 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS, 344 &myslot.status); 345 if (!rc) { 346 present = SLOT_PRESENT(myslot.status); 347 if (present == HPC_SLOT_EMPTY) 348 *value = 0; 349 else 350 *value = 1; 351 } 352 } 353 354 ibmphp_unlock_operations(); 355 debug("get_adapter_present - Exit rc[%d] value[%x]\n", rc, *value); 356 return rc; 357} 358 359static int get_max_bus_speed(struct slot *slot) 360{ 361 int rc = 0; 362 u8 mode = 0; 363 enum pci_bus_speed speed; 364 struct pci_bus *bus = slot->hotplug_slot.pci_slot->bus; 365 366 debug("%s - Entry slot[%p]\n", __func__, slot); 367 368 ibmphp_lock_operations(); 369 mode = slot->supported_bus_mode; 370 speed = slot->supported_speed; 371 ibmphp_unlock_operations(); 372 373 switch (speed) { 374 case BUS_SPEED_33: 375 break; 376 case BUS_SPEED_66: 377 if (mode == BUS_MODE_PCIX) 378 speed += 0x01; 379 break; 380 case BUS_SPEED_100: 381 case BUS_SPEED_133: 382 speed += 0x01; 383 break; 384 default: 385 /* Note (will need to change): there would be soon 256, 512 also */ 386 rc = -ENODEV; 387 } 388 389 if (!rc) 390 bus->max_bus_speed = speed; 391 392 debug("%s - Exit rc[%d] speed[%x]\n", __func__, rc, speed); 393 return rc; 394} 395 396/**************************************************************************** 397 * This routine will initialize the ops data structure used in the validate 398 * function. It will also power off empty slots that are powered on since BIOS 399 * leaves those on, albeit disconnected 400 ****************************************************************************/ 401static int __init init_ops(void) 402{ 403 struct slot *slot_cur; 404 int retval; 405 int rc; 406 407 list_for_each_entry(slot_cur, &ibmphp_slot_head, ibm_slot_list) { 408 debug("BEFORE GETTING SLOT STATUS, slot # %x\n", 409 slot_cur->number); 410 if (slot_cur->ctrl->revision == 0xFF) 411 if (get_ctrl_revision(slot_cur, 412 &slot_cur->ctrl->revision)) 413 return -1; 414 415 if (slot_cur->bus_on->current_speed == 0xFF) 416 if (get_cur_bus_info(&slot_cur)) 417 return -1; 418 get_max_bus_speed(slot_cur); 419 420 if (slot_cur->ctrl->options == 0xFF) 421 if (get_hpc_options(slot_cur, &slot_cur->ctrl->options)) 422 return -1; 423 424 retval = slot_update(&slot_cur); 425 if (retval) 426 return retval; 427 428 debug("status = %x\n", slot_cur->status); 429 debug("ext_status = %x\n", slot_cur->ext_status); 430 debug("SLOT_POWER = %x\n", SLOT_POWER(slot_cur->status)); 431 debug("SLOT_PRESENT = %x\n", SLOT_PRESENT(slot_cur->status)); 432 debug("SLOT_LATCH = %x\n", SLOT_LATCH(slot_cur->status)); 433 434 if ((SLOT_PWRGD(slot_cur->status)) && 435 !(SLOT_PRESENT(slot_cur->status)) && 436 !(SLOT_LATCH(slot_cur->status))) { 437 debug("BEFORE POWER OFF COMMAND\n"); 438 rc = power_off(slot_cur); 439 if (rc) 440 return rc; 441 442 /* retval = slot_update(&slot_cur); 443 * if (retval) 444 * return retval; 445 * ibmphp_update_slot_info(slot_cur); 446 */ 447 } 448 } 449 init_flag = 0; 450 return 0; 451} 452 453/* This operation will check whether the slot is within the bounds and 454 * the operation is valid to perform on that slot 455 * Parameters: slot, operation 456 * Returns: 0 or error codes 457 */ 458static int validate(struct slot *slot_cur, int opn) 459{ 460 int number; 461 int retval; 462 463 if (!slot_cur) 464 return -ENODEV; 465 number = slot_cur->number; 466 if ((number > max_slots) || (number < 0)) 467 return -EBADSLT; 468 debug("slot_number in validate is %d\n", slot_cur->number); 469 470 retval = slot_update(&slot_cur); 471 if (retval) 472 return retval; 473 474 switch (opn) { 475 case ENABLE: 476 if (!(SLOT_PWRGD(slot_cur->status)) && 477 (SLOT_PRESENT(slot_cur->status)) && 478 !(SLOT_LATCH(slot_cur->status))) 479 return 0; 480 break; 481 case DISABLE: 482 if ((SLOT_PWRGD(slot_cur->status)) && 483 (SLOT_PRESENT(slot_cur->status)) && 484 !(SLOT_LATCH(slot_cur->status))) 485 return 0; 486 break; 487 default: 488 break; 489 } 490 err("validate failed....\n"); 491 return -EINVAL; 492} 493 494/**************************************************************************** 495 * This routine is for updating the data structures in the hotplug core 496 * Parameters: struct slot 497 * Returns: 0 or error 498 ****************************************************************************/ 499int ibmphp_update_slot_info(struct slot *slot_cur) 500{ 501 struct pci_bus *bus = slot_cur->hotplug_slot.pci_slot->bus; 502 u8 bus_speed; 503 u8 mode; 504 505 bus_speed = slot_cur->bus_on->current_speed; 506 mode = slot_cur->bus_on->current_bus_mode; 507 508 switch (bus_speed) { 509 case BUS_SPEED_33: 510 break; 511 case BUS_SPEED_66: 512 if (mode == BUS_MODE_PCIX) 513 bus_speed += 0x01; 514 else if (mode == BUS_MODE_PCI) 515 ; 516 else 517 bus_speed = PCI_SPEED_UNKNOWN; 518 break; 519 case BUS_SPEED_100: 520 case BUS_SPEED_133: 521 bus_speed += 0x01; 522 break; 523 default: 524 bus_speed = PCI_SPEED_UNKNOWN; 525 } 526 527 bus->cur_bus_speed = bus_speed; 528 // To do: bus_names 529 530 return 0; 531} 532 533 534/****************************************************************************** 535 * This function will return the pci_func, given bus and devfunc, or NULL. It 536 * is called from visit routines 537 ******************************************************************************/ 538 539static struct pci_func *ibm_slot_find(u8 busno, u8 device, u8 function) 540{ 541 struct pci_func *func_cur; 542 struct slot *slot_cur; 543 list_for_each_entry(slot_cur, &ibmphp_slot_head, ibm_slot_list) { 544 if (slot_cur->func) { 545 func_cur = slot_cur->func; 546 while (func_cur) { 547 if ((func_cur->busno == busno) && 548 (func_cur->device == device) && 549 (func_cur->function == function)) 550 return func_cur; 551 func_cur = func_cur->next; 552 } 553 } 554 } 555 return NULL; 556} 557 558/************************************************************* 559 * This routine frees up memory used by struct slot, including 560 * the pointers to pci_func, bus, hotplug_slot, controller, 561 * and deregistering from the hotplug core 562 *************************************************************/ 563static void free_slots(void) 564{ 565 struct slot *slot_cur, *next; 566 567 debug("%s -- enter\n", __func__); 568 569 list_for_each_entry_safe(slot_cur, next, &ibmphp_slot_head, 570 ibm_slot_list) { 571 pci_hp_del(&slot_cur->hotplug_slot); 572 slot_cur->ctrl = NULL; 573 slot_cur->bus_on = NULL; 574 575 /* 576 * We don't want to actually remove the resources, 577 * since ibmphp_free_resources() will do just that. 578 */ 579 ibmphp_unconfigure_card(&slot_cur, -1); 580 581 pci_hp_destroy(&slot_cur->hotplug_slot); 582 kfree(slot_cur); 583 } 584 debug("%s -- exit\n", __func__); 585} 586 587static void ibm_unconfigure_device(struct pci_func *func) 588{ 589 struct pci_dev *temp; 590 u8 j; 591 592 debug("inside %s\n", __func__); 593 debug("func->device = %x, func->function = %x\n", 594 func->device, func->function); 595 debug("func->device << 3 | 0x0 = %x\n", func->device << 3 | 0x0); 596 597 pci_lock_rescan_remove(); 598 599 for (j = 0; j < 0x08; j++) { 600 temp = pci_get_domain_bus_and_slot(0, func->busno, 601 (func->device << 3) | j); 602 if (temp) { 603 pci_stop_and_remove_bus_device(temp); 604 pci_dev_put(temp); 605 } 606 } 607 608 pci_dev_put(func->dev); 609 610 pci_unlock_rescan_remove(); 611} 612 613/* 614 * The following function is to fix kernel bug regarding 615 * getting bus entries, here we manually add those primary 616 * bus entries to kernel bus structure whenever apply 617 */ 618static u8 bus_structure_fixup(u8 busno) 619{ 620 struct pci_bus *bus, *b; 621 struct pci_dev *dev; 622 u16 l; 623 624 if (pci_find_bus(0, busno) || !(ibmphp_find_same_bus_num(busno))) 625 return 1; 626 627 bus = kmalloc(sizeof(*bus), GFP_KERNEL); 628 if (!bus) 629 return 1; 630 631 dev = kmalloc(sizeof(*dev), GFP_KERNEL); 632 if (!dev) { 633 kfree(bus); 634 return 1; 635 } 636 637 bus->number = busno; 638 bus->ops = ibmphp_pci_bus->ops; 639 dev->bus = bus; 640 for (dev->devfn = 0; dev->devfn < 256; dev->devfn += 8) { 641 if (!pci_read_config_word(dev, PCI_VENDOR_ID, &l) && 642 (l != 0x0000) && (l != 0xffff)) { 643 debug("%s - Inside bus_structure_fixup()\n", 644 __func__); 645 b = pci_scan_bus(busno, ibmphp_pci_bus->ops, NULL); 646 if (!b) 647 continue; 648 649 pci_bus_add_devices(b); 650 break; 651 } 652 } 653 654 kfree(dev); 655 kfree(bus); 656 657 return 0; 658} 659 660static int ibm_configure_device(struct pci_func *func) 661{ 662 struct pci_bus *child; 663 int num; 664 int flag = 0; /* this is to make sure we don't double scan the bus, 665 for bridged devices primarily */ 666 667 pci_lock_rescan_remove(); 668 669 if (!(bus_structure_fixup(func->busno))) 670 flag = 1; 671 if (func->dev == NULL) 672 func->dev = pci_get_domain_bus_and_slot(0, func->busno, 673 PCI_DEVFN(func->device, func->function)); 674 675 if (func->dev == NULL) { 676 struct pci_bus *bus = pci_find_bus(0, func->busno); 677 if (!bus) 678 goto out; 679 680 num = pci_scan_slot(bus, 681 PCI_DEVFN(func->device, func->function)); 682 if (num) 683 pci_bus_add_devices(bus); 684 685 func->dev = pci_get_domain_bus_and_slot(0, func->busno, 686 PCI_DEVFN(func->device, func->function)); 687 if (func->dev == NULL) { 688 err("ERROR... : pci_dev still NULL\n"); 689 goto out; 690 } 691 } 692 if (!(flag) && (func->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)) { 693 pci_hp_add_bridge(func->dev); 694 child = func->dev->subordinate; 695 if (child) 696 pci_bus_add_devices(child); 697 } 698 699 out: 700 pci_unlock_rescan_remove(); 701 return 0; 702} 703 704/******************************************************* 705 * Returns whether the bus is empty or not 706 *******************************************************/ 707static int is_bus_empty(struct slot *slot_cur) 708{ 709 int rc; 710 struct slot *tmp_slot; 711 u8 i = slot_cur->bus_on->slot_min; 712 713 while (i <= slot_cur->bus_on->slot_max) { 714 if (i == slot_cur->number) { 715 i++; 716 continue; 717 } 718 tmp_slot = ibmphp_get_slot_from_physical_num(i); 719 if (!tmp_slot) 720 return 0; 721 rc = slot_update(&tmp_slot); 722 if (rc) 723 return 0; 724 if (SLOT_PRESENT(tmp_slot->status) && 725 SLOT_PWRGD(tmp_slot->status)) 726 return 0; 727 i++; 728 } 729 return 1; 730} 731 732/*********************************************************** 733 * If the HPC permits and the bus currently empty, tries to set the 734 * bus speed and mode at the maximum card and bus capability 735 * Parameters: slot 736 * Returns: bus is set (0) or error code 737 ***********************************************************/ 738static int set_bus(struct slot *slot_cur) 739{ 740 int rc; 741 u8 speed; 742 u8 cmd = 0x0; 743 int retval; 744 static const struct pci_device_id ciobx[] = { 745 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 0x0101) }, 746 { }, 747 }; 748 749 debug("%s - entry slot # %d\n", __func__, slot_cur->number); 750 if (SET_BUS_STATUS(slot_cur->ctrl) && is_bus_empty(slot_cur)) { 751 rc = slot_update(&slot_cur); 752 if (rc) 753 return rc; 754 speed = SLOT_SPEED(slot_cur->ext_status); 755 debug("ext_status = %x, speed = %x\n", slot_cur->ext_status, speed); 756 switch (speed) { 757 case HPC_SLOT_SPEED_33: 758 cmd = HPC_BUS_33CONVMODE; 759 break; 760 case HPC_SLOT_SPEED_66: 761 if (SLOT_PCIX(slot_cur->ext_status)) { 762 if ((slot_cur->supported_speed >= BUS_SPEED_66) && 763 (slot_cur->supported_bus_mode == BUS_MODE_PCIX)) 764 cmd = HPC_BUS_66PCIXMODE; 765 else if (!SLOT_BUS_MODE(slot_cur->ext_status)) 766 /* if max slot/bus capability is 66 pci 767 and there's no bus mode mismatch, then 768 the adapter supports 66 pci */ 769 cmd = HPC_BUS_66CONVMODE; 770 else 771 cmd = HPC_BUS_33CONVMODE; 772 } else { 773 if (slot_cur->supported_speed >= BUS_SPEED_66) 774 cmd = HPC_BUS_66CONVMODE; 775 else 776 cmd = HPC_BUS_33CONVMODE; 777 } 778 break; 779 case HPC_SLOT_SPEED_133: 780 switch (slot_cur->supported_speed) { 781 case BUS_SPEED_33: 782 cmd = HPC_BUS_33CONVMODE; 783 break; 784 case BUS_SPEED_66: 785 if (slot_cur->supported_bus_mode == BUS_MODE_PCIX) 786 cmd = HPC_BUS_66PCIXMODE; 787 else 788 cmd = HPC_BUS_66CONVMODE; 789 break; 790 case BUS_SPEED_100: 791 cmd = HPC_BUS_100PCIXMODE; 792 break; 793 case BUS_SPEED_133: 794 /* This is to take care of the bug in CIOBX chip */ 795 if (pci_dev_present(ciobx)) 796 ibmphp_hpc_writeslot(slot_cur, 797 HPC_BUS_100PCIXMODE); 798 cmd = HPC_BUS_133PCIXMODE; 799 break; 800 default: 801 err("Wrong bus speed\n"); 802 return -ENODEV; 803 } 804 break; 805 default: 806 err("wrong slot speed\n"); 807 return -ENODEV; 808 } 809 debug("setting bus speed for slot %d, cmd %x\n", 810 slot_cur->number, cmd); 811 retval = ibmphp_hpc_writeslot(slot_cur, cmd); 812 if (retval) { 813 err("setting bus speed failed\n"); 814 return retval; 815 } 816 if (CTLR_RESULT(slot_cur->ctrl->status)) { 817 err("command not completed successfully in set_bus\n"); 818 return -EIO; 819 } 820 } 821 /* This is for x440, once Brandon fixes the firmware, 822 will not need this delay */ 823 msleep(1000); 824 debug("%s -Exit\n", __func__); 825 return 0; 826} 827 828/* This routine checks the bus limitations that the slot is on from the BIOS. 829 * This is used in deciding whether or not to power up the slot. 830 * (electrical/spec limitations. For example, >1 133 MHz or >2 66 PCI cards on 831 * same bus) 832 * Parameters: slot 833 * Returns: 0 = no limitations, -EINVAL = exceeded limitations on the bus 834 */ 835static int check_limitations(struct slot *slot_cur) 836{ 837 u8 i; 838 struct slot *tmp_slot; 839 u8 count = 0; 840 u8 limitation = 0; 841 842 for (i = slot_cur->bus_on->slot_min; i <= slot_cur->bus_on->slot_max; i++) { 843 tmp_slot = ibmphp_get_slot_from_physical_num(i); 844 if (!tmp_slot) 845 return -ENODEV; 846 if ((SLOT_PWRGD(tmp_slot->status)) && 847 !(SLOT_CONNECT(tmp_slot->status))) 848 count++; 849 } 850 get_cur_bus_info(&slot_cur); 851 switch (slot_cur->bus_on->current_speed) { 852 case BUS_SPEED_33: 853 limitation = slot_cur->bus_on->slots_at_33_conv; 854 break; 855 case BUS_SPEED_66: 856 if (slot_cur->bus_on->current_bus_mode == BUS_MODE_PCIX) 857 limitation = slot_cur->bus_on->slots_at_66_pcix; 858 else 859 limitation = slot_cur->bus_on->slots_at_66_conv; 860 break; 861 case BUS_SPEED_100: 862 limitation = slot_cur->bus_on->slots_at_100_pcix; 863 break; 864 case BUS_SPEED_133: 865 limitation = slot_cur->bus_on->slots_at_133_pcix; 866 break; 867 } 868 869 if ((count + 1) > limitation) 870 return -EINVAL; 871 return 0; 872} 873 874static inline void print_card_capability(struct slot *slot_cur) 875{ 876 info("capability of the card is "); 877 if ((slot_cur->ext_status & CARD_INFO) == PCIX133) 878 info(" 133 MHz PCI-X\n"); 879 else if ((slot_cur->ext_status & CARD_INFO) == PCIX66) 880 info(" 66 MHz PCI-X\n"); 881 else if ((slot_cur->ext_status & CARD_INFO) == PCI66) 882 info(" 66 MHz PCI\n"); 883 else 884 info(" 33 MHz PCI\n"); 885 886} 887 888/* This routine will power on the slot, configure the device(s) and find the 889 * drivers for them. 890 * Parameters: hotplug_slot 891 * Returns: 0 or failure codes 892 */ 893static int enable_slot(struct hotplug_slot *hs) 894{ 895 int rc, i, rcpr; 896 struct slot *slot_cur; 897 u8 function; 898 struct pci_func *tmp_func; 899 900 ibmphp_lock_operations(); 901 902 debug("ENABLING SLOT........\n"); 903 slot_cur = to_slot(hs); 904 905 rc = validate(slot_cur, ENABLE); 906 if (rc) { 907 err("validate function failed\n"); 908 goto error_nopower; 909 } 910 911 attn_LED_blink(slot_cur); 912 913 rc = set_bus(slot_cur); 914 if (rc) { 915 err("was not able to set the bus\n"); 916 goto error_nopower; 917 } 918 919 /*-----------------debugging------------------------------*/ 920 get_cur_bus_info(&slot_cur); 921 debug("the current bus speed right after set_bus = %x\n", 922 slot_cur->bus_on->current_speed); 923 /*----------------------------------------------------------*/ 924 925 rc = check_limitations(slot_cur); 926 if (rc) { 927 err("Adding this card exceeds the limitations of this bus.\n"); 928 err("(i.e., >1 133MHz cards running on same bus, or >2 66 PCI cards running on same bus.\n"); 929 err("Try hot-adding into another bus\n"); 930 rc = -EINVAL; 931 goto error_nopower; 932 } 933 934 rc = power_on(slot_cur); 935 936 if (rc) { 937 err("something wrong when powering up... please see below for details\n"); 938 /* need to turn off before on, otherwise, blinking overwrites */ 939 attn_off(slot_cur); 940 attn_on(slot_cur); 941 if (slot_update(&slot_cur)) { 942 attn_off(slot_cur); 943 attn_on(slot_cur); 944 rc = -ENODEV; 945 goto exit; 946 } 947 /* Check to see the error of why it failed */ 948 if ((SLOT_POWER(slot_cur->status)) && 949 !(SLOT_PWRGD(slot_cur->status))) 950 err("power fault occurred trying to power up\n"); 951 else if (SLOT_BUS_SPEED(slot_cur->status)) { 952 err("bus speed mismatch occurred. please check current bus speed and card capability\n"); 953 print_card_capability(slot_cur); 954 } else if (SLOT_BUS_MODE(slot_cur->ext_status)) { 955 err("bus mode mismatch occurred. please check current bus mode and card capability\n"); 956 print_card_capability(slot_cur); 957 } 958 ibmphp_update_slot_info(slot_cur); 959 goto exit; 960 } 961 debug("after power_on\n"); 962 /*-----------------------debugging---------------------------*/ 963 get_cur_bus_info(&slot_cur); 964 debug("the current bus speed right after power_on = %x\n", 965 slot_cur->bus_on->current_speed); 966 /*----------------------------------------------------------*/ 967 968 rc = slot_update(&slot_cur); 969 if (rc) 970 goto error_power; 971 972 rc = -EINVAL; 973 if (SLOT_POWER(slot_cur->status) && !(SLOT_PWRGD(slot_cur->status))) { 974 err("power fault occurred trying to power up...\n"); 975 goto error_power; 976 } 977 if (SLOT_POWER(slot_cur->status) && (SLOT_BUS_SPEED(slot_cur->status))) { 978 err("bus speed mismatch occurred. please check current bus speed and card capability\n"); 979 print_card_capability(slot_cur); 980 goto error_power; 981 } 982 /* Don't think this case will happen after above checks... 983 * but just in case, for paranoia sake */ 984 if (!(SLOT_POWER(slot_cur->status))) { 985 err("power on failed...\n"); 986 goto error_power; 987 } 988 989 slot_cur->func = kzalloc(sizeof(struct pci_func), GFP_KERNEL); 990 if (!slot_cur->func) { 991 /* do update_slot_info here? */ 992 rc = -ENOMEM; 993 goto error_power; 994 } 995 slot_cur->func->busno = slot_cur->bus; 996 slot_cur->func->device = slot_cur->device; 997 for (i = 0; i < 4; i++) 998 slot_cur->func->irq[i] = slot_cur->irq[i]; 999 1000 debug("b4 configure_card, slot_cur->bus = %x, slot_cur->device = %x\n", 1001 slot_cur->bus, slot_cur->device); 1002 1003 if (ibmphp_configure_card(slot_cur->func, slot_cur->number)) { 1004 err("configure_card was unsuccessful...\n"); 1005 /* true because don't need to actually deallocate resources, 1006 * just remove references */ 1007 ibmphp_unconfigure_card(&slot_cur, 1); 1008 debug("after unconfigure_card\n"); 1009 slot_cur->func = NULL; 1010 rc = -ENOMEM; 1011 goto error_power; 1012 } 1013 1014 function = 0x00; 1015 do { 1016 tmp_func = ibm_slot_find(slot_cur->bus, slot_cur->func->device, 1017 function++); 1018 if (tmp_func && !(tmp_func->dev)) 1019 ibm_configure_device(tmp_func); 1020 } while (tmp_func); 1021 1022 attn_off(slot_cur); 1023 if (slot_update(&slot_cur)) { 1024 rc = -EFAULT; 1025 goto exit; 1026 } 1027 ibmphp_print_test(); 1028 rc = ibmphp_update_slot_info(slot_cur); 1029exit: 1030 ibmphp_unlock_operations(); 1031 return rc; 1032 1033error_nopower: 1034 attn_off(slot_cur); /* need to turn off if was blinking b4 */ 1035 attn_on(slot_cur); 1036error_cont: 1037 rcpr = slot_update(&slot_cur); 1038 if (rcpr) { 1039 rc = rcpr; 1040 goto exit; 1041 } 1042 ibmphp_update_slot_info(slot_cur); 1043 goto exit; 1044 1045error_power: 1046 attn_off(slot_cur); /* need to turn off if was blinking b4 */ 1047 attn_on(slot_cur); 1048 rcpr = power_off(slot_cur); 1049 if (rcpr) { 1050 rc = rcpr; 1051 goto exit; 1052 } 1053 goto error_cont; 1054} 1055 1056/************************************************************** 1057* HOT REMOVING ADAPTER CARD * 1058* INPUT: POINTER TO THE HOTPLUG SLOT STRUCTURE * 1059* OUTPUT: SUCCESS 0 ; FAILURE: UNCONFIGURE , VALIDATE * 1060* DISABLE POWER , * 1061**************************************************************/ 1062static int ibmphp_disable_slot(struct hotplug_slot *hotplug_slot) 1063{ 1064 struct slot *slot = to_slot(hotplug_slot); 1065 int rc; 1066 1067 ibmphp_lock_operations(); 1068 rc = ibmphp_do_disable_slot(slot); 1069 ibmphp_unlock_operations(); 1070 return rc; 1071} 1072 1073int ibmphp_do_disable_slot(struct slot *slot_cur) 1074{ 1075 int rc; 1076 u8 flag; 1077 1078 debug("DISABLING SLOT...\n"); 1079 1080 if ((slot_cur == NULL) || (slot_cur->ctrl == NULL)) 1081 return -ENODEV; 1082 1083 flag = slot_cur->flag; 1084 slot_cur->flag = 1; 1085 1086 if (flag == 1) { 1087 rc = validate(slot_cur, DISABLE); 1088 /* checking if powered off already & valid slot # */ 1089 if (rc) 1090 goto error; 1091 } 1092 attn_LED_blink(slot_cur); 1093 1094 if (slot_cur->func == NULL) { 1095 /* We need this for functions that were there on bootup */ 1096 slot_cur->func = kzalloc(sizeof(struct pci_func), GFP_KERNEL); 1097 if (!slot_cur->func) { 1098 rc = -ENOMEM; 1099 goto error; 1100 } 1101 slot_cur->func->busno = slot_cur->bus; 1102 slot_cur->func->device = slot_cur->device; 1103 } 1104 1105 ibm_unconfigure_device(slot_cur->func); 1106 1107 /* 1108 * If we got here from latch suddenly opening on operating card or 1109 * a power fault, there's no power to the card, so cannot 1110 * read from it to determine what resources it occupied. This operation 1111 * is forbidden anyhow. The best we can do is remove it from kernel 1112 * lists at least */ 1113 1114 if (!flag) { 1115 attn_off(slot_cur); 1116 return 0; 1117 } 1118 1119 rc = ibmphp_unconfigure_card(&slot_cur, 0); 1120 slot_cur->func = NULL; 1121 debug("in disable_slot. after unconfigure_card\n"); 1122 if (rc) { 1123 err("could not unconfigure card.\n"); 1124 goto error; 1125 } 1126 1127 rc = ibmphp_hpc_writeslot(slot_cur, HPC_SLOT_OFF); 1128 if (rc) 1129 goto error; 1130 1131 attn_off(slot_cur); 1132 rc = slot_update(&slot_cur); 1133 if (rc) 1134 goto exit; 1135 1136 rc = ibmphp_update_slot_info(slot_cur); 1137 ibmphp_print_test(); 1138exit: 1139 return rc; 1140 1141error: 1142 /* Need to turn off if was blinking b4 */ 1143 attn_off(slot_cur); 1144 attn_on(slot_cur); 1145 if (slot_update(&slot_cur)) { 1146 rc = -EFAULT; 1147 goto exit; 1148 } 1149 if (flag) 1150 ibmphp_update_slot_info(slot_cur); 1151 goto exit; 1152} 1153 1154const struct hotplug_slot_ops ibmphp_hotplug_slot_ops = { 1155 .set_attention_status = set_attention_status, 1156 .enable_slot = enable_slot, 1157 .disable_slot = ibmphp_disable_slot, 1158 .hardware_test = NULL, 1159 .get_power_status = get_power_status, 1160 .get_attention_status = get_attention_status, 1161 .get_latch_status = get_latch_status, 1162 .get_adapter_status = get_adapter_present, 1163}; 1164 1165static void ibmphp_unload(void) 1166{ 1167 free_slots(); 1168 debug("after slots\n"); 1169 ibmphp_free_resources(); 1170 debug("after resources\n"); 1171 ibmphp_free_bus_info_queue(); 1172 debug("after bus info\n"); 1173 ibmphp_free_ebda_hpc_queue(); 1174 debug("after ebda hpc\n"); 1175 ibmphp_free_ebda_pci_rsrc_queue(); 1176 debug("after ebda pci rsrc\n"); 1177 kfree(ibmphp_pci_bus); 1178} 1179 1180static int __init ibmphp_init(void) 1181{ 1182 struct pci_bus *bus; 1183 int i = 0; 1184 int rc = 0; 1185 1186 init_flag = 1; 1187 1188 info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); 1189 1190 ibmphp_pci_bus = kmalloc(sizeof(*ibmphp_pci_bus), GFP_KERNEL); 1191 if (!ibmphp_pci_bus) { 1192 rc = -ENOMEM; 1193 goto exit; 1194 } 1195 1196 bus = pci_find_bus(0, 0); 1197 if (!bus) { 1198 err("Can't find the root pci bus, can not continue\n"); 1199 rc = -ENODEV; 1200 goto error; 1201 } 1202 memcpy(ibmphp_pci_bus, bus, sizeof(*ibmphp_pci_bus)); 1203 1204 ibmphp_debug = debug; 1205 1206 for (i = 0; i < 16; i++) 1207 irqs[i] = 0; 1208 1209 rc = ibmphp_access_ebda(); 1210 if (rc) 1211 goto error; 1212 debug("after ibmphp_access_ebda()\n"); 1213 1214 rc = ibmphp_rsrc_init(); 1215 if (rc) 1216 goto error; 1217 debug("AFTER Resource & EBDA INITIALIZATIONS\n"); 1218 1219 max_slots = get_max_slots(); 1220 1221 rc = ibmphp_register_pci(); 1222 if (rc) 1223 goto error; 1224 1225 if (init_ops()) { 1226 rc = -ENODEV; 1227 goto error; 1228 } 1229 1230 ibmphp_print_test(); 1231 rc = ibmphp_hpc_start_poll_thread(); 1232 if (rc) 1233 goto error; 1234 1235exit: 1236 return rc; 1237 1238error: 1239 ibmphp_unload(); 1240 goto exit; 1241} 1242 1243static void __exit ibmphp_exit(void) 1244{ 1245 ibmphp_hpc_stop_poll_thread(); 1246 debug("after polling\n"); 1247 ibmphp_unload(); 1248 debug("done\n"); 1249} 1250 1251module_init(ibmphp_init); 1252module_exit(ibmphp_exit); 1253