1// SPDX-License-Identifier: GPL-2.0-only
2
3/*
4 * Radio tuning for Philips SA2400 on RTL8180
5 *
6 * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
7 *
8 * Code from the BSD driver and the rtl8181 project have been
9 * very useful to understand certain things
10 *
11 * I want to thanks the Authors of such projects and the Ndiswrapper
12 * project Authors.
13 *
14 * A special Big Thanks also is for all people who donated me cards,
15 * making possible the creation of the original rtl8180 driver
16 * from which this code is derived!
17 */
18
19#include <linux/pci.h>
20#include <linux/delay.h>
21#include <net/mac80211.h>
22
23#include "rtl8180.h"
24#include "sa2400.h"
25
26static const u32 sa2400_chan[] = {
27	0x00096c, /* ch1 */
28	0x080970,
29	0x100974,
30	0x180978,
31	0x000980,
32	0x080984,
33	0x100988,
34	0x18098c,
35	0x000994,
36	0x080998,
37	0x10099c,
38	0x1809a0,
39	0x0009a8,
40	0x0009b4, /* ch 14 */
41};
42
43static void write_sa2400(struct ieee80211_hw *dev, u8 addr, u32 data)
44{
45	struct rtl8180_priv *priv = dev->priv;
46	u32 phy_config;
47
48	/* MAC will bang bits to the sa2400. sw 3-wire is NOT used */
49	phy_config = 0xb0000000;
50
51	phy_config |= ((u32)(addr & 0xf)) << 24;
52	phy_config |= data & 0xffffff;
53
54	rtl818x_iowrite32(priv,
55		(__le32 __iomem *) &priv->map->RFPinsOutput, phy_config);
56
57	msleep(3);
58}
59
60static void sa2400_write_phy_antenna(struct ieee80211_hw *dev, short chan)
61{
62	struct rtl8180_priv *priv = dev->priv;
63	u8 ant = SA2400_ANTENNA;
64
65	if (priv->rfparam & RF_PARAM_ANTBDEFAULT)
66		ant |= BB_ANTENNA_B;
67
68	if (chan == 14)
69		ant |= BB_ANTATTEN_CHAN14;
70
71	rtl8180_write_phy(dev, 0x10, ant);
72
73}
74
75static u8 sa2400_rf_rssi_map[] = {
76	0x64, 0x64, 0x63, 0x62, 0x61, 0x60, 0x5f, 0x5e,
77	0x5d, 0x5c, 0x5b, 0x5a, 0x57, 0x54, 0x52, 0x50,
78	0x4e, 0x4c, 0x4a, 0x48, 0x46, 0x44, 0x41, 0x3f,
79	0x3c, 0x3a, 0x37, 0x36, 0x36, 0x1c, 0x1c, 0x1b,
80	0x1b, 0x1a, 0x1a, 0x19, 0x19, 0x18, 0x18, 0x17,
81	0x17, 0x16, 0x16, 0x15, 0x15, 0x14, 0x14, 0x13,
82	0x13, 0x12, 0x12, 0x11, 0x11, 0x10, 0x10, 0x0f,
83	0x0f, 0x0e, 0x0e, 0x0d, 0x0d, 0x0c, 0x0c, 0x0b,
84	0x0b, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x07,
85	0x07, 0x06, 0x06, 0x05, 0x04, 0x03, 0x02,
86};
87
88static u8 sa2400_rf_calc_rssi(u8 agc, u8 sq)
89{
90	if (sq == 0x80)
91		return 1;
92
93	if (sq > 78)
94		return 32;
95
96	/* TODO: recalc sa2400_rf_rssi_map to avoid mult / div */
97	return 65 * sa2400_rf_rssi_map[sq] / 100;
98}
99
100static void sa2400_rf_set_channel(struct ieee80211_hw *dev,
101				  struct ieee80211_conf *conf)
102{
103	struct rtl8180_priv *priv = dev->priv;
104	int channel =
105		ieee80211_frequency_to_channel(conf->chandef.chan->center_freq);
106	u32 txpw = priv->channels[channel - 1].hw_value & 0xFF;
107	u32 chan = sa2400_chan[channel - 1];
108
109	write_sa2400(dev, 7, txpw);
110
111	sa2400_write_phy_antenna(dev, channel);
112
113	write_sa2400(dev, 0, chan);
114	write_sa2400(dev, 1, 0xbb50);
115	write_sa2400(dev, 2, 0x80);
116	write_sa2400(dev, 3, 0);
117}
118
119static void sa2400_rf_stop(struct ieee80211_hw *dev)
120{
121	write_sa2400(dev, 4, 0);
122}
123
124static void sa2400_rf_init(struct ieee80211_hw *dev)
125{
126	struct rtl8180_priv *priv = dev->priv;
127	u32 anaparam, txconf;
128	u8 firdac;
129	int analogphy = priv->rfparam & RF_PARAM_ANALOGPHY;
130
131	anaparam = priv->anaparam;
132	anaparam &= ~(1 << ANAPARAM_TXDACOFF_SHIFT);
133	anaparam &= ~ANAPARAM_PWR1_MASK;
134	anaparam &= ~ANAPARAM_PWR0_MASK;
135
136	if (analogphy) {
137		anaparam |= SA2400_ANA_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT;
138		firdac = 0;
139	} else {
140		anaparam |= (SA2400_DIG_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT);
141		anaparam |= (SA2400_ANAPARAM_PWR0_ON << ANAPARAM_PWR0_SHIFT);
142		firdac = 1 << SA2400_REG4_FIRDAC_SHIFT;
143	}
144
145	rtl8180_set_anaparam(priv, anaparam);
146
147	write_sa2400(dev, 0, sa2400_chan[0]);
148	write_sa2400(dev, 1, 0xbb50);
149	write_sa2400(dev, 2, 0x80);
150	write_sa2400(dev, 3, 0);
151	write_sa2400(dev, 4, 0x19340 | firdac);
152	write_sa2400(dev, 5, 0x1dfb | (SA2400_MAX_SENS - 54) << 15);
153	write_sa2400(dev, 4, 0x19348 | firdac); /* calibrate VCO */
154
155	if (!analogphy)
156		write_sa2400(dev, 4, 0x1938c); /*???*/
157
158	write_sa2400(dev, 4, 0x19340 | firdac);
159
160	write_sa2400(dev, 0, sa2400_chan[0]);
161	write_sa2400(dev, 1, 0xbb50);
162	write_sa2400(dev, 2, 0x80);
163	write_sa2400(dev, 3, 0);
164	write_sa2400(dev, 4, 0x19344 | firdac); /* calibrate filter */
165
166	/* new from rtl8180 embedded driver (rtl8181 project) */
167	write_sa2400(dev, 6, 0x13ff | (1 << 23)); /* MANRX */
168	write_sa2400(dev, 8, 0); /* VCO */
169
170	if (analogphy) {
171		rtl8180_set_anaparam(priv, anaparam |
172				     (1 << ANAPARAM_TXDACOFF_SHIFT));
173
174		txconf = rtl818x_ioread32(priv, &priv->map->TX_CONF);
175		rtl818x_iowrite32(priv, &priv->map->TX_CONF,
176			txconf | RTL818X_TX_CONF_LOOPBACK_CONT);
177
178		write_sa2400(dev, 4, 0x19341); /* calibrates DC */
179
180		/* a 5us sleep is required here,
181		 * we rely on the 3ms delay introduced in write_sa2400 */
182		write_sa2400(dev, 4, 0x19345);
183
184		/* a 20us sleep is required here,
185		 * we rely on the 3ms delay introduced in write_sa2400 */
186
187		rtl818x_iowrite32(priv, &priv->map->TX_CONF, txconf);
188
189		rtl8180_set_anaparam(priv, anaparam);
190	}
191	/* end new code */
192
193	write_sa2400(dev, 4, 0x19341 | firdac); /* RTX MODE */
194
195	/* baseband configuration */
196	rtl8180_write_phy(dev, 0, 0x98);
197	rtl8180_write_phy(dev, 3, 0x38);
198	rtl8180_write_phy(dev, 4, 0xe0);
199	rtl8180_write_phy(dev, 5, 0x90);
200	rtl8180_write_phy(dev, 6, 0x1a);
201	rtl8180_write_phy(dev, 7, 0x64);
202
203	sa2400_write_phy_antenna(dev, 1);
204
205	rtl8180_write_phy(dev, 0x11, 0x80);
206
207	if (rtl818x_ioread8(priv, &priv->map->CONFIG2) &
208	    RTL818X_CONFIG2_ANTENNA_DIV)
209		rtl8180_write_phy(dev, 0x12, 0xc7); /* enable ant diversity */
210	else
211		rtl8180_write_phy(dev, 0x12, 0x47); /* disable ant diversity */
212
213	rtl8180_write_phy(dev, 0x13, 0x90 | priv->csthreshold);
214
215	rtl8180_write_phy(dev, 0x19, 0x0);
216	rtl8180_write_phy(dev, 0x1a, 0xa0);
217}
218
219const struct rtl818x_rf_ops sa2400_rf_ops = {
220	.name		= "Philips",
221	.init		= sa2400_rf_init,
222	.stop		= sa2400_rf_stop,
223	.set_chan	= sa2400_rf_set_channel,
224	.calc_rssi	= sa2400_rf_calc_rssi,
225};
226