1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * wanXL serial card driver for Linux 4 * host part 5 * 6 * Copyright (C) 2003 Krzysztof Halasa <khc@pm.waw.pl> 7 * 8 * Status: 9 * - Only DTE (external clock) support with NRZ and NRZI encodings 10 * - wanXL100 will require minor driver modifications, no access to hw 11 */ 12 13#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 14 15#include <linux/module.h> 16#include <linux/kernel.h> 17#include <linux/slab.h> 18#include <linux/sched.h> 19#include <linux/types.h> 20#include <linux/fcntl.h> 21#include <linux/string.h> 22#include <linux/errno.h> 23#include <linux/init.h> 24#include <linux/interrupt.h> 25#include <linux/ioport.h> 26#include <linux/netdevice.h> 27#include <linux/hdlc.h> 28#include <linux/pci.h> 29#include <linux/dma-mapping.h> 30#include <linux/delay.h> 31#include <asm/io.h> 32 33#include "wanxl.h" 34 35static const char *version = "wanXL serial card driver version: 0.48"; 36 37#define PLX_CTL_RESET 0x40000000 /* adapter reset */ 38 39#undef DEBUG_PKT 40#undef DEBUG_PCI 41 42/* MAILBOX #1 - PUTS COMMANDS */ 43#define MBX1_CMD_ABORTJ 0x85000000 /* Abort and Jump */ 44#ifdef __LITTLE_ENDIAN 45#define MBX1_CMD_BSWAP 0x8C000001 /* little-endian Byte Swap Mode */ 46#else 47#define MBX1_CMD_BSWAP 0x8C000000 /* big-endian Byte Swap Mode */ 48#endif 49 50/* MAILBOX #2 - DRAM SIZE */ 51#define MBX2_MEMSZ_MASK 0xFFFF0000 /* PUTS Memory Size Register mask */ 52 53struct port { 54 struct net_device *dev; 55 struct card *card; 56 spinlock_t lock; /* for wanxl_xmit */ 57 int node; /* physical port #0 - 3 */ 58 unsigned int clock_type; 59 int tx_in, tx_out; 60 struct sk_buff *tx_skbs[TX_BUFFERS]; 61}; 62 63struct card_status { 64 desc_t rx_descs[RX_QUEUE_LENGTH]; 65 port_status_t port_status[4]; 66}; 67 68struct card { 69 int n_ports; /* 1, 2 or 4 ports */ 70 u8 irq; 71 72 u8 __iomem *plx; /* PLX PCI9060 virtual base address */ 73 struct pci_dev *pdev; /* for pci_name(pdev) */ 74 int rx_in; 75 struct sk_buff *rx_skbs[RX_QUEUE_LENGTH]; 76 struct card_status *status; /* shared between host and card */ 77 dma_addr_t status_address; 78 struct port ports[]; /* 1 - 4 port structures follow */ 79}; 80 81static inline struct port *dev_to_port(struct net_device *dev) 82{ 83 return (struct port *)dev_to_hdlc(dev)->priv; 84} 85 86static inline port_status_t *get_status(struct port *port) 87{ 88 return &port->card->status->port_status[port->node]; 89} 90 91#ifdef DEBUG_PCI 92static inline dma_addr_t pci_map_single_debug(struct pci_dev *pdev, void *ptr, 93 size_t size, int direction) 94{ 95 dma_addr_t addr = dma_map_single(&pdev->dev, ptr, size, direction); 96 97 if (addr + size > 0x100000000LL) 98 pr_crit("%s: pci_map_single() returned memory at 0x%llx!\n", 99 pci_name(pdev), (unsigned long long)addr); 100 return addr; 101} 102 103#undef pci_map_single 104#define pci_map_single pci_map_single_debug 105#endif 106 107/* Cable and/or personality module change interrupt service */ 108static inline void wanxl_cable_intr(struct port *port) 109{ 110 u32 value = get_status(port)->cable; 111 int valid = 1; 112 const char *cable, *pm, *dte = "", *dsr = "", *dcd = ""; 113 114 switch (value & 0x7) { 115 case STATUS_CABLE_V35: 116 cable = "V.35"; 117 break; 118 case STATUS_CABLE_X21: 119 cable = "X.21"; 120 break; 121 case STATUS_CABLE_V24: 122 cable = "V.24"; 123 break; 124 case STATUS_CABLE_EIA530: 125 cable = "EIA530"; 126 break; 127 case STATUS_CABLE_NONE: 128 cable = "no"; 129 break; 130 default: 131 cable = "invalid"; 132 } 133 134 switch ((value >> STATUS_CABLE_PM_SHIFT) & 0x7) { 135 case STATUS_CABLE_V35: 136 pm = "V.35"; 137 break; 138 case STATUS_CABLE_X21: 139 pm = "X.21"; 140 break; 141 case STATUS_CABLE_V24: 142 pm = "V.24"; 143 break; 144 case STATUS_CABLE_EIA530: 145 pm = "EIA530"; 146 break; 147 case STATUS_CABLE_NONE: 148 pm = "no personality"; 149 valid = 0; 150 break; 151 default: 152 pm = "invalid personality"; 153 valid = 0; 154 } 155 156 if (valid) { 157 if ((value & 7) == ((value >> STATUS_CABLE_PM_SHIFT) & 7)) { 158 dsr = (value & STATUS_CABLE_DSR) ? ", DSR ON" : 159 ", DSR off"; 160 dcd = (value & STATUS_CABLE_DCD) ? ", carrier ON" : 161 ", carrier off"; 162 } 163 dte = (value & STATUS_CABLE_DCE) ? " DCE" : " DTE"; 164 } 165 netdev_info(port->dev, "%s%s module, %s cable%s%s\n", 166 pm, dte, cable, dsr, dcd); 167 168 if (value & STATUS_CABLE_DCD) 169 netif_carrier_on(port->dev); 170 else 171 netif_carrier_off(port->dev); 172} 173 174/* Transmit complete interrupt service */ 175static inline void wanxl_tx_intr(struct port *port) 176{ 177 struct net_device *dev = port->dev; 178 179 while (1) { 180 desc_t *desc = &get_status(port)->tx_descs[port->tx_in]; 181 struct sk_buff *skb = port->tx_skbs[port->tx_in]; 182 183 switch (desc->stat) { 184 case PACKET_FULL: 185 case PACKET_EMPTY: 186 netif_wake_queue(dev); 187 return; 188 189 case PACKET_UNDERRUN: 190 dev->stats.tx_errors++; 191 dev->stats.tx_fifo_errors++; 192 break; 193 194 default: 195 dev->stats.tx_packets++; 196 dev->stats.tx_bytes += skb->len; 197 } 198 desc->stat = PACKET_EMPTY; /* Free descriptor */ 199 dma_unmap_single(&port->card->pdev->dev, desc->address, 200 skb->len, DMA_TO_DEVICE); 201 dev_consume_skb_irq(skb); 202 port->tx_in = (port->tx_in + 1) % TX_BUFFERS; 203 } 204} 205 206/* Receive complete interrupt service */ 207static inline void wanxl_rx_intr(struct card *card) 208{ 209 desc_t *desc; 210 211 while (desc = &card->status->rx_descs[card->rx_in], 212 desc->stat != PACKET_EMPTY) { 213 if ((desc->stat & PACKET_PORT_MASK) > card->n_ports) { 214 pr_crit("%s: received packet for nonexistent port\n", 215 pci_name(card->pdev)); 216 } else { 217 struct sk_buff *skb = card->rx_skbs[card->rx_in]; 218 struct port *port = &card->ports[desc->stat & 219 PACKET_PORT_MASK]; 220 struct net_device *dev = port->dev; 221 222 if (!skb) { 223 dev->stats.rx_dropped++; 224 } else { 225 dma_unmap_single(&card->pdev->dev, 226 desc->address, BUFFER_LENGTH, 227 DMA_FROM_DEVICE); 228 skb_put(skb, desc->length); 229 230#ifdef DEBUG_PKT 231 printk(KERN_DEBUG "%s RX(%i):", dev->name, 232 skb->len); 233 debug_frame(skb); 234#endif 235 dev->stats.rx_packets++; 236 dev->stats.rx_bytes += skb->len; 237 skb->protocol = hdlc_type_trans(skb, dev); 238 netif_rx(skb); 239 skb = NULL; 240 } 241 242 if (!skb) { 243 skb = dev_alloc_skb(BUFFER_LENGTH); 244 desc->address = skb ? 245 dma_map_single(&card->pdev->dev, 246 skb->data, 247 BUFFER_LENGTH, 248 DMA_FROM_DEVICE) : 0; 249 card->rx_skbs[card->rx_in] = skb; 250 } 251 } 252 desc->stat = PACKET_EMPTY; /* Free descriptor */ 253 card->rx_in = (card->rx_in + 1) % RX_QUEUE_LENGTH; 254 } 255} 256 257static irqreturn_t wanxl_intr(int irq, void *dev_id) 258{ 259 struct card *card = dev_id; 260 int i; 261 u32 stat; 262 int handled = 0; 263 264 while ((stat = readl(card->plx + PLX_DOORBELL_FROM_CARD)) != 0) { 265 handled = 1; 266 writel(stat, card->plx + PLX_DOORBELL_FROM_CARD); 267 268 for (i = 0; i < card->n_ports; i++) { 269 if (stat & (1 << (DOORBELL_FROM_CARD_TX_0 + i))) 270 wanxl_tx_intr(&card->ports[i]); 271 if (stat & (1 << (DOORBELL_FROM_CARD_CABLE_0 + i))) 272 wanxl_cable_intr(&card->ports[i]); 273 } 274 if (stat & (1 << DOORBELL_FROM_CARD_RX)) 275 wanxl_rx_intr(card); 276 } 277 278 return IRQ_RETVAL(handled); 279} 280 281static netdev_tx_t wanxl_xmit(struct sk_buff *skb, struct net_device *dev) 282{ 283 struct port *port = dev_to_port(dev); 284 desc_t *desc; 285 286 spin_lock(&port->lock); 287 288 desc = &get_status(port)->tx_descs[port->tx_out]; 289 if (desc->stat != PACKET_EMPTY) { 290 /* should never happen - previous xmit should stop queue */ 291#ifdef DEBUG_PKT 292 printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name); 293#endif 294 netif_stop_queue(dev); 295 spin_unlock(&port->lock); 296 return NETDEV_TX_BUSY; /* request packet to be queued */ 297 } 298 299#ifdef DEBUG_PKT 300 printk(KERN_DEBUG "%s TX(%i):", dev->name, skb->len); 301 debug_frame(skb); 302#endif 303 304 port->tx_skbs[port->tx_out] = skb; 305 desc->address = dma_map_single(&port->card->pdev->dev, skb->data, 306 skb->len, DMA_TO_DEVICE); 307 desc->length = skb->len; 308 desc->stat = PACKET_FULL; 309 writel(1 << (DOORBELL_TO_CARD_TX_0 + port->node), 310 port->card->plx + PLX_DOORBELL_TO_CARD); 311 312 port->tx_out = (port->tx_out + 1) % TX_BUFFERS; 313 314 if (get_status(port)->tx_descs[port->tx_out].stat != PACKET_EMPTY) { 315 netif_stop_queue(dev); 316#ifdef DEBUG_PKT 317 printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name); 318#endif 319 } 320 321 spin_unlock(&port->lock); 322 return NETDEV_TX_OK; 323} 324 325static int wanxl_attach(struct net_device *dev, unsigned short encoding, 326 unsigned short parity) 327{ 328 struct port *port = dev_to_port(dev); 329 330 if (encoding != ENCODING_NRZ && 331 encoding != ENCODING_NRZI) 332 return -EINVAL; 333 334 if (parity != PARITY_NONE && 335 parity != PARITY_CRC32_PR1_CCITT && 336 parity != PARITY_CRC16_PR1_CCITT && 337 parity != PARITY_CRC32_PR0_CCITT && 338 parity != PARITY_CRC16_PR0_CCITT) 339 return -EINVAL; 340 341 get_status(port)->encoding = encoding; 342 get_status(port)->parity = parity; 343 return 0; 344} 345 346static int wanxl_ioctl(struct net_device *dev, struct if_settings *ifs) 347{ 348 const size_t size = sizeof(sync_serial_settings); 349 sync_serial_settings line; 350 struct port *port = dev_to_port(dev); 351 352 switch (ifs->type) { 353 case IF_GET_IFACE: 354 ifs->type = IF_IFACE_SYNC_SERIAL; 355 if (ifs->size < size) { 356 ifs->size = size; /* data size wanted */ 357 return -ENOBUFS; 358 } 359 memset(&line, 0, sizeof(line)); 360 line.clock_type = get_status(port)->clocking; 361 line.clock_rate = 0; 362 line.loopback = 0; 363 364 if (copy_to_user(ifs->ifs_ifsu.sync, &line, size)) 365 return -EFAULT; 366 return 0; 367 368 case IF_IFACE_SYNC_SERIAL: 369 if (!capable(CAP_NET_ADMIN)) 370 return -EPERM; 371 if (dev->flags & IFF_UP) 372 return -EBUSY; 373 374 if (copy_from_user(&line, ifs->ifs_ifsu.sync, 375 size)) 376 return -EFAULT; 377 378 if (line.clock_type != CLOCK_EXT && 379 line.clock_type != CLOCK_TXFROMRX) 380 return -EINVAL; /* No such clock setting */ 381 382 if (line.loopback != 0) 383 return -EINVAL; 384 385 get_status(port)->clocking = line.clock_type; 386 return 0; 387 388 default: 389 return hdlc_ioctl(dev, ifs); 390 } 391} 392 393static int wanxl_open(struct net_device *dev) 394{ 395 struct port *port = dev_to_port(dev); 396 u8 __iomem *dbr = port->card->plx + PLX_DOORBELL_TO_CARD; 397 unsigned long timeout; 398 int i; 399 400 if (get_status(port)->open) { 401 netdev_err(dev, "port already open\n"); 402 return -EIO; 403 } 404 405 i = hdlc_open(dev); 406 if (i) 407 return i; 408 409 port->tx_in = port->tx_out = 0; 410 for (i = 0; i < TX_BUFFERS; i++) 411 get_status(port)->tx_descs[i].stat = PACKET_EMPTY; 412 /* signal the card */ 413 writel(1 << (DOORBELL_TO_CARD_OPEN_0 + port->node), dbr); 414 415 timeout = jiffies + HZ; 416 do { 417 if (get_status(port)->open) { 418 netif_start_queue(dev); 419 return 0; 420 } 421 } while (time_after(timeout, jiffies)); 422 423 netdev_err(dev, "unable to open port\n"); 424 /* ask the card to close the port, should it be still alive */ 425 writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node), dbr); 426 return -EFAULT; 427} 428 429static int wanxl_close(struct net_device *dev) 430{ 431 struct port *port = dev_to_port(dev); 432 unsigned long timeout; 433 int i; 434 435 hdlc_close(dev); 436 /* signal the card */ 437 writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node), 438 port->card->plx + PLX_DOORBELL_TO_CARD); 439 440 timeout = jiffies + HZ; 441 do { 442 if (!get_status(port)->open) 443 break; 444 } while (time_after(timeout, jiffies)); 445 446 if (get_status(port)->open) 447 netdev_err(dev, "unable to close port\n"); 448 449 netif_stop_queue(dev); 450 451 for (i = 0; i < TX_BUFFERS; i++) { 452 desc_t *desc = &get_status(port)->tx_descs[i]; 453 454 if (desc->stat != PACKET_EMPTY) { 455 desc->stat = PACKET_EMPTY; 456 dma_unmap_single(&port->card->pdev->dev, 457 desc->address, port->tx_skbs[i]->len, 458 DMA_TO_DEVICE); 459 dev_kfree_skb(port->tx_skbs[i]); 460 } 461 } 462 return 0; 463} 464 465static struct net_device_stats *wanxl_get_stats(struct net_device *dev) 466{ 467 struct port *port = dev_to_port(dev); 468 469 dev->stats.rx_over_errors = get_status(port)->rx_overruns; 470 dev->stats.rx_frame_errors = get_status(port)->rx_frame_errors; 471 dev->stats.rx_errors = dev->stats.rx_over_errors + 472 dev->stats.rx_frame_errors; 473 return &dev->stats; 474} 475 476static int wanxl_puts_command(struct card *card, u32 cmd) 477{ 478 unsigned long timeout = jiffies + 5 * HZ; 479 480 writel(cmd, card->plx + PLX_MAILBOX_1); 481 do { 482 if (readl(card->plx + PLX_MAILBOX_1) == 0) 483 return 0; 484 485 schedule(); 486 } while (time_after(timeout, jiffies)); 487 488 return -1; 489} 490 491static void wanxl_reset(struct card *card) 492{ 493 u32 old_value = readl(card->plx + PLX_CONTROL) & ~PLX_CTL_RESET; 494 495 writel(0x80, card->plx + PLX_MAILBOX_0); 496 writel(old_value | PLX_CTL_RESET, card->plx + PLX_CONTROL); 497 readl(card->plx + PLX_CONTROL); /* wait for posted write */ 498 udelay(1); 499 writel(old_value, card->plx + PLX_CONTROL); 500 readl(card->plx + PLX_CONTROL); /* wait for posted write */ 501} 502 503static void wanxl_pci_remove_one(struct pci_dev *pdev) 504{ 505 struct card *card = pci_get_drvdata(pdev); 506 int i; 507 508 for (i = 0; i < card->n_ports; i++) { 509 unregister_hdlc_device(card->ports[i].dev); 510 free_netdev(card->ports[i].dev); 511 } 512 513 /* unregister and free all host resources */ 514 if (card->irq) 515 free_irq(card->irq, card); 516 517 wanxl_reset(card); 518 519 for (i = 0; i < RX_QUEUE_LENGTH; i++) 520 if (card->rx_skbs[i]) { 521 dma_unmap_single(&card->pdev->dev, 522 card->status->rx_descs[i].address, 523 BUFFER_LENGTH, DMA_FROM_DEVICE); 524 dev_kfree_skb(card->rx_skbs[i]); 525 } 526 527 if (card->plx) 528 iounmap(card->plx); 529 530 if (card->status) 531 dma_free_coherent(&pdev->dev, sizeof(struct card_status), 532 card->status, card->status_address); 533 534 pci_release_regions(pdev); 535 pci_disable_device(pdev); 536 kfree(card); 537} 538 539#include "wanxlfw.inc" 540 541static const struct net_device_ops wanxl_ops = { 542 .ndo_open = wanxl_open, 543 .ndo_stop = wanxl_close, 544 .ndo_start_xmit = hdlc_start_xmit, 545 .ndo_siocwandev = wanxl_ioctl, 546 .ndo_get_stats = wanxl_get_stats, 547}; 548 549static int wanxl_pci_init_one(struct pci_dev *pdev, 550 const struct pci_device_id *ent) 551{ 552 struct card *card; 553 u32 ramsize, stat; 554 unsigned long timeout; 555 u32 plx_phy; /* PLX PCI base address */ 556 u32 mem_phy; /* memory PCI base addr */ 557 u8 __iomem *mem; /* memory virtual base addr */ 558 int i, ports; 559 560#ifndef MODULE 561 pr_info_once("%s\n", version); 562#endif 563 564 i = pci_enable_device(pdev); 565 if (i) 566 return i; 567 568 /* QUICC can only access first 256 MB of host RAM directly, 569 * but PLX9060 DMA does 32-bits for actual packet data transfers 570 */ 571 572 /* FIXME when PCI/DMA subsystems are fixed. 573 * We set both dma_mask and consistent_dma_mask to 28 bits 574 * and pray pci_alloc_consistent() will use this info. It should 575 * work on most platforms 576 */ 577 if (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(28)) || 578 dma_set_mask(&pdev->dev, DMA_BIT_MASK(28))) { 579 pr_err("No usable DMA configuration\n"); 580 pci_disable_device(pdev); 581 return -EIO; 582 } 583 584 i = pci_request_regions(pdev, "wanXL"); 585 if (i) { 586 pci_disable_device(pdev); 587 return i; 588 } 589 590 switch (pdev->device) { 591 case PCI_DEVICE_ID_SBE_WANXL100: 592 ports = 1; 593 break; 594 case PCI_DEVICE_ID_SBE_WANXL200: 595 ports = 2; 596 break; 597 default: 598 ports = 4; 599 } 600 601 card = kzalloc(struct_size(card, ports, ports), GFP_KERNEL); 602 if (!card) { 603 pci_release_regions(pdev); 604 pci_disable_device(pdev); 605 return -ENOBUFS; 606 } 607 608 pci_set_drvdata(pdev, card); 609 card->pdev = pdev; 610 611 card->status = dma_alloc_coherent(&pdev->dev, 612 sizeof(struct card_status), 613 &card->status_address, GFP_KERNEL); 614 if (!card->status) { 615 wanxl_pci_remove_one(pdev); 616 return -ENOBUFS; 617 } 618 619#ifdef DEBUG_PCI 620 printk(KERN_DEBUG "wanXL %s: pci_alloc_consistent() returned memory" 621 " at 0x%LX\n", pci_name(pdev), 622 (unsigned long long)card->status_address); 623#endif 624 625 /* FIXME when PCI/DMA subsystems are fixed. 626 * We set both dma_mask and consistent_dma_mask back to 32 bits 627 * to indicate the card can do 32-bit DMA addressing 628 */ 629 if (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)) || 630 dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) { 631 pr_err("No usable DMA configuration\n"); 632 wanxl_pci_remove_one(pdev); 633 return -EIO; 634 } 635 636 /* set up PLX mapping */ 637 plx_phy = pci_resource_start(pdev, 0); 638 639 card->plx = ioremap(plx_phy, 0x70); 640 if (!card->plx) { 641 pr_err("ioremap() failed\n"); 642 wanxl_pci_remove_one(pdev); 643 return -EFAULT; 644 } 645 646#if RESET_WHILE_LOADING 647 wanxl_reset(card); 648#endif 649 650 timeout = jiffies + 20 * HZ; 651 while ((stat = readl(card->plx + PLX_MAILBOX_0)) != 0) { 652 if (time_before(timeout, jiffies)) { 653 pr_warn("%s: timeout waiting for PUTS to complete\n", 654 pci_name(pdev)); 655 wanxl_pci_remove_one(pdev); 656 return -ENODEV; 657 } 658 659 switch (stat & 0xC0) { 660 case 0x00: /* hmm - PUTS completed with non-zero code? */ 661 case 0x80: /* PUTS still testing the hardware */ 662 break; 663 664 default: 665 pr_warn("%s: PUTS test 0x%X failed\n", 666 pci_name(pdev), stat & 0x30); 667 wanxl_pci_remove_one(pdev); 668 return -ENODEV; 669 } 670 671 schedule(); 672 } 673 674 /* get on-board memory size (PUTS detects no more than 4 MB) */ 675 ramsize = readl(card->plx + PLX_MAILBOX_2) & MBX2_MEMSZ_MASK; 676 677 /* set up on-board RAM mapping */ 678 mem_phy = pci_resource_start(pdev, 2); 679 680 /* sanity check the board's reported memory size */ 681 if (ramsize < BUFFERS_ADDR + 682 (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports) { 683 pr_warn("%s: no enough on-board RAM (%u bytes detected, %u bytes required)\n", 684 pci_name(pdev), ramsize, 685 BUFFERS_ADDR + 686 (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports); 687 wanxl_pci_remove_one(pdev); 688 return -ENODEV; 689 } 690 691 if (wanxl_puts_command(card, MBX1_CMD_BSWAP)) { 692 pr_warn("%s: unable to Set Byte Swap Mode\n", pci_name(pdev)); 693 wanxl_pci_remove_one(pdev); 694 return -ENODEV; 695 } 696 697 for (i = 0; i < RX_QUEUE_LENGTH; i++) { 698 struct sk_buff *skb = dev_alloc_skb(BUFFER_LENGTH); 699 700 card->rx_skbs[i] = skb; 701 if (skb) 702 card->status->rx_descs[i].address = 703 dma_map_single(&card->pdev->dev, skb->data, 704 BUFFER_LENGTH, DMA_FROM_DEVICE); 705 } 706 707 mem = ioremap(mem_phy, PDM_OFFSET + sizeof(firmware)); 708 if (!mem) { 709 pr_err("ioremap() failed\n"); 710 wanxl_pci_remove_one(pdev); 711 return -EFAULT; 712 } 713 714 for (i = 0; i < sizeof(firmware); i += 4) 715 writel(ntohl(*(__be32 *)(firmware + i)), mem + PDM_OFFSET + i); 716 717 for (i = 0; i < ports; i++) 718 writel(card->status_address + 719 (void *)&card->status->port_status[i] - 720 (void *)card->status, mem + PDM_OFFSET + 4 + i * 4); 721 writel(card->status_address, mem + PDM_OFFSET + 20); 722 writel(PDM_OFFSET, mem); 723 iounmap(mem); 724 725 writel(0, card->plx + PLX_MAILBOX_5); 726 727 if (wanxl_puts_command(card, MBX1_CMD_ABORTJ)) { 728 pr_warn("%s: unable to Abort and Jump\n", pci_name(pdev)); 729 wanxl_pci_remove_one(pdev); 730 return -ENODEV; 731 } 732 733 timeout = jiffies + 5 * HZ; 734 do { 735 stat = readl(card->plx + PLX_MAILBOX_5); 736 if (stat) 737 break; 738 schedule(); 739 } while (time_after(timeout, jiffies)); 740 741 if (!stat) { 742 pr_warn("%s: timeout while initializing card firmware\n", 743 pci_name(pdev)); 744 wanxl_pci_remove_one(pdev); 745 return -ENODEV; 746 } 747 748#if DETECT_RAM 749 ramsize = stat; 750#endif 751 752 pr_info("%s: at 0x%X, %u KB of RAM at 0x%X, irq %u\n", 753 pci_name(pdev), plx_phy, ramsize / 1024, mem_phy, pdev->irq); 754 755 /* Allocate IRQ */ 756 if (request_irq(pdev->irq, wanxl_intr, IRQF_SHARED, "wanXL", card)) { 757 pr_warn("%s: could not allocate IRQ%i\n", 758 pci_name(pdev), pdev->irq); 759 wanxl_pci_remove_one(pdev); 760 return -EBUSY; 761 } 762 card->irq = pdev->irq; 763 764 for (i = 0; i < ports; i++) { 765 hdlc_device *hdlc; 766 struct port *port = &card->ports[i]; 767 struct net_device *dev = alloc_hdlcdev(port); 768 769 if (!dev) { 770 pr_err("%s: unable to allocate memory\n", 771 pci_name(pdev)); 772 wanxl_pci_remove_one(pdev); 773 return -ENOMEM; 774 } 775 776 port->dev = dev; 777 hdlc = dev_to_hdlc(dev); 778 spin_lock_init(&port->lock); 779 dev->tx_queue_len = 50; 780 dev->netdev_ops = &wanxl_ops; 781 hdlc->attach = wanxl_attach; 782 hdlc->xmit = wanxl_xmit; 783 port->card = card; 784 port->node = i; 785 get_status(port)->clocking = CLOCK_EXT; 786 if (register_hdlc_device(dev)) { 787 pr_err("%s: unable to register hdlc device\n", 788 pci_name(pdev)); 789 free_netdev(dev); 790 wanxl_pci_remove_one(pdev); 791 return -ENOBUFS; 792 } 793 card->n_ports++; 794 } 795 796 pr_info("%s: port", pci_name(pdev)); 797 for (i = 0; i < ports; i++) 798 pr_cont("%s #%i: %s", 799 i ? "," : "", i, card->ports[i].dev->name); 800 pr_cont("\n"); 801 802 for (i = 0; i < ports; i++) 803 wanxl_cable_intr(&card->ports[i]); /* get carrier status etc.*/ 804 805 return 0; 806} 807 808static const struct pci_device_id wanxl_pci_tbl[] = { 809 { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL100, PCI_ANY_ID, 810 PCI_ANY_ID, 0, 0, 0 }, 811 { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL200, PCI_ANY_ID, 812 PCI_ANY_ID, 0, 0, 0 }, 813 { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL400, PCI_ANY_ID, 814 PCI_ANY_ID, 0, 0, 0 }, 815 { 0, } 816}; 817 818static struct pci_driver wanxl_pci_driver = { 819 .name = "wanXL", 820 .id_table = wanxl_pci_tbl, 821 .probe = wanxl_pci_init_one, 822 .remove = wanxl_pci_remove_one, 823}; 824 825static int __init wanxl_init_module(void) 826{ 827#ifdef MODULE 828 pr_info("%s\n", version); 829#endif 830 return pci_register_driver(&wanxl_pci_driver); 831} 832 833static void __exit wanxl_cleanup_module(void) 834{ 835 pci_unregister_driver(&wanxl_pci_driver); 836} 837 838MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); 839MODULE_DESCRIPTION("SBE Inc. wanXL serial port driver"); 840MODULE_LICENSE("GPL v2"); 841MODULE_DEVICE_TABLE(pci, wanxl_pci_tbl); 842 843module_init(wanxl_init_module); 844module_exit(wanxl_cleanup_module); 845