1// SPDX-License-Identifier: GPL-2.0-or-later 2/* sb1000.c: A General Instruments SB1000 driver for linux. */ 3/* 4 Written 1998 by Franco Venturi. 5 6 Copyright 1998 by Franco Venturi. 7 Copyright 1994,1995 by Donald Becker. 8 Copyright 1993 United States Government as represented by the 9 Director, National Security Agency. 10 11 This driver is for the General Instruments SB1000 (internal SURFboard) 12 13 The author may be reached as fventuri@mediaone.net 14 15 16 Changes: 17 18 981115 Steven Hirsch <shirsch@adelphia.net> 19 20 Linus changed the timer interface. Should work on all recent 21 development kernels. 22 23 980608 Steven Hirsch <shirsch@adelphia.net> 24 25 Small changes to make it work with 2.1.x kernels. Hopefully, 26 nothing major will change before official release of Linux 2.2. 27 28 Merged with 2.2 - Alan Cox 29*/ 30 31static char version[] = "sb1000.c:v1.1.2 6/01/98 (fventuri@mediaone.net)\n"; 32 33#include <linux/module.h> 34#include <linux/kernel.h> 35#include <linux/sched.h> 36#include <linux/string.h> 37#include <linux/interrupt.h> 38#include <linux/errno.h> 39#include <linux/if_cablemodem.h> /* for SIOGCM/SIOSCM stuff */ 40#include <linux/in.h> 41#include <linux/ioport.h> 42#include <linux/netdevice.h> 43#include <linux/if_arp.h> 44#include <linux/skbuff.h> 45#include <linux/delay.h> /* for udelay() */ 46#include <linux/etherdevice.h> 47#include <linux/pnp.h> 48#include <linux/init.h> 49#include <linux/bitops.h> 50#include <linux/gfp.h> 51 52#include <asm/io.h> 53#include <asm/processor.h> 54#include <linux/uaccess.h> 55 56#ifdef SB1000_DEBUG 57static int sb1000_debug = SB1000_DEBUG; 58#else 59static const int sb1000_debug = 1; 60#endif 61 62static const int SB1000_IO_EXTENT = 8; 63/* SB1000 Maximum Receive Unit */ 64static const int SB1000_MRU = 1500; /* octects */ 65 66#define NPIDS 4 67struct sb1000_private { 68 struct sk_buff *rx_skb[NPIDS]; 69 short rx_dlen[NPIDS]; 70 unsigned int rx_frames; 71 short rx_error_count; 72 short rx_error_dpc_count; 73 unsigned char rx_session_id[NPIDS]; 74 unsigned char rx_frame_id[NPIDS]; 75 unsigned char rx_pkt_type[NPIDS]; 76}; 77 78/* prototypes for Linux interface */ 79extern int sb1000_probe(struct net_device *dev); 80static int sb1000_open(struct net_device *dev); 81static int sb1000_siocdevprivate(struct net_device *dev, struct ifreq *ifr, 82 void __user *data, int cmd); 83static netdev_tx_t sb1000_start_xmit(struct sk_buff *skb, 84 struct net_device *dev); 85static irqreturn_t sb1000_interrupt(int irq, void *dev_id); 86static int sb1000_close(struct net_device *dev); 87 88 89/* SB1000 hardware routines to be used during open/configuration phases */ 90static int card_wait_for_busy_clear(const int ioaddr[], 91 const char* name); 92static int card_wait_for_ready(const int ioaddr[], const char* name, 93 unsigned char in[]); 94static int card_send_command(const int ioaddr[], const char* name, 95 const unsigned char out[], unsigned char in[]); 96 97/* SB1000 hardware routines to be used during frame rx interrupt */ 98static int sb1000_wait_for_ready(const int ioaddr[], const char* name); 99static int sb1000_wait_for_ready_clear(const int ioaddr[], 100 const char* name); 101static void sb1000_send_command(const int ioaddr[], const char* name, 102 const unsigned char out[]); 103static void sb1000_read_status(const int ioaddr[], unsigned char in[]); 104static void sb1000_issue_read_command(const int ioaddr[], 105 const char* name); 106 107/* SB1000 commands for open/configuration */ 108static int sb1000_reset(const int ioaddr[], const char* name); 109static int sb1000_check_CRC(const int ioaddr[], const char* name); 110static inline int sb1000_start_get_set_command(const int ioaddr[], 111 const char* name); 112static int sb1000_end_get_set_command(const int ioaddr[], 113 const char* name); 114static int sb1000_activate(const int ioaddr[], const char* name); 115static int sb1000_get_firmware_version(const int ioaddr[], 116 const char* name, unsigned char version[], int do_end); 117static int sb1000_get_frequency(const int ioaddr[], const char* name, 118 int* frequency); 119static int sb1000_set_frequency(const int ioaddr[], const char* name, 120 int frequency); 121static int sb1000_get_PIDs(const int ioaddr[], const char* name, 122 short PID[]); 123static int sb1000_set_PIDs(const int ioaddr[], const char* name, 124 const short PID[]); 125 126/* SB1000 commands for frame rx interrupt */ 127static int sb1000_rx(struct net_device *dev); 128static void sb1000_error_dpc(struct net_device *dev); 129 130static const struct pnp_device_id sb1000_pnp_ids[] = { 131 { "GIC1000", 0 }, 132 { "", 0 } 133}; 134MODULE_DEVICE_TABLE(pnp, sb1000_pnp_ids); 135 136static const struct net_device_ops sb1000_netdev_ops = { 137 .ndo_open = sb1000_open, 138 .ndo_start_xmit = sb1000_start_xmit, 139 .ndo_siocdevprivate = sb1000_siocdevprivate, 140 .ndo_stop = sb1000_close, 141 .ndo_set_mac_address = eth_mac_addr, 142 .ndo_validate_addr = eth_validate_addr, 143}; 144 145static int 146sb1000_probe_one(struct pnp_dev *pdev, const struct pnp_device_id *id) 147{ 148 struct net_device *dev; 149 unsigned short ioaddr[2], irq; 150 unsigned int serial_number; 151 int error = -ENODEV; 152 u8 addr[ETH_ALEN]; 153 154 if (pnp_device_attach(pdev) < 0) 155 return -ENODEV; 156 if (pnp_activate_dev(pdev) < 0) 157 goto out_detach; 158 159 if (!pnp_port_valid(pdev, 0) || !pnp_port_valid(pdev, 1)) 160 goto out_disable; 161 if (!pnp_irq_valid(pdev, 0)) 162 goto out_disable; 163 164 serial_number = pdev->card->serial; 165 166 ioaddr[0] = pnp_port_start(pdev, 0); 167 ioaddr[1] = pnp_port_start(pdev, 0); 168 169 irq = pnp_irq(pdev, 0); 170 171 if (!request_region(ioaddr[0], 16, "sb1000")) 172 goto out_disable; 173 if (!request_region(ioaddr[1], 16, "sb1000")) 174 goto out_release_region0; 175 176 dev = alloc_etherdev(sizeof(struct sb1000_private)); 177 if (!dev) { 178 error = -ENOMEM; 179 goto out_release_regions; 180 } 181 182 183 dev->base_addr = ioaddr[0]; 184 /* mem_start holds the second I/O address */ 185 dev->mem_start = ioaddr[1]; 186 dev->irq = irq; 187 188 if (sb1000_debug > 0) 189 printk(KERN_NOTICE "%s: sb1000 at (%#3.3lx,%#3.3lx), " 190 "S/N %#8.8x, IRQ %d.\n", dev->name, dev->base_addr, 191 dev->mem_start, serial_number, dev->irq); 192 193 /* 194 * The SB1000 is an rx-only cable modem device. The uplink is a modem 195 * and we do not want to arp on it. 196 */ 197 dev->flags = IFF_POINTOPOINT|IFF_NOARP; 198 199 SET_NETDEV_DEV(dev, &pdev->dev); 200 201 if (sb1000_debug > 0) 202 printk(KERN_NOTICE "%s", version); 203 204 dev->netdev_ops = &sb1000_netdev_ops; 205 206 /* hardware address is 0:0:serial_number */ 207 addr[0] = 0; 208 addr[1] = 0; 209 addr[2] = serial_number >> 24 & 0xff; 210 addr[3] = serial_number >> 16 & 0xff; 211 addr[4] = serial_number >> 8 & 0xff; 212 addr[5] = serial_number >> 0 & 0xff; 213 eth_hw_addr_set(dev, addr); 214 215 pnp_set_drvdata(pdev, dev); 216 217 error = register_netdev(dev); 218 if (error) 219 goto out_free_netdev; 220 return 0; 221 222 out_free_netdev: 223 free_netdev(dev); 224 out_release_regions: 225 release_region(ioaddr[1], 16); 226 out_release_region0: 227 release_region(ioaddr[0], 16); 228 out_disable: 229 pnp_disable_dev(pdev); 230 out_detach: 231 pnp_device_detach(pdev); 232 return error; 233} 234 235static void 236sb1000_remove_one(struct pnp_dev *pdev) 237{ 238 struct net_device *dev = pnp_get_drvdata(pdev); 239 240 unregister_netdev(dev); 241 release_region(dev->base_addr, 16); 242 release_region(dev->mem_start, 16); 243 free_netdev(dev); 244} 245 246static struct pnp_driver sb1000_driver = { 247 .name = "sb1000", 248 .id_table = sb1000_pnp_ids, 249 .probe = sb1000_probe_one, 250 .remove = sb1000_remove_one, 251}; 252 253 254/* 255 * SB1000 hardware routines to be used during open/configuration phases 256 */ 257 258static const int TimeOutJiffies = (875 * HZ) / 100; 259 260/* Card Wait For Busy Clear (cannot be used during an interrupt) */ 261static int 262card_wait_for_busy_clear(const int ioaddr[], const char* name) 263{ 264 unsigned char a; 265 unsigned long timeout; 266 267 a = inb(ioaddr[0] + 7); 268 timeout = jiffies + TimeOutJiffies; 269 while (a & 0x80 || a & 0x40) { 270 /* a little sleep */ 271 yield(); 272 273 a = inb(ioaddr[0] + 7); 274 if (time_after_eq(jiffies, timeout)) { 275 printk(KERN_WARNING "%s: card_wait_for_busy_clear timeout\n", 276 name); 277 return -ETIME; 278 } 279 } 280 281 return 0; 282} 283 284/* Card Wait For Ready (cannot be used during an interrupt) */ 285static int 286card_wait_for_ready(const int ioaddr[], const char* name, unsigned char in[]) 287{ 288 unsigned char a; 289 unsigned long timeout; 290 291 a = inb(ioaddr[1] + 6); 292 timeout = jiffies + TimeOutJiffies; 293 while (a & 0x80 || !(a & 0x40)) { 294 /* a little sleep */ 295 yield(); 296 297 a = inb(ioaddr[1] + 6); 298 if (time_after_eq(jiffies, timeout)) { 299 printk(KERN_WARNING "%s: card_wait_for_ready timeout\n", 300 name); 301 return -ETIME; 302 } 303 } 304 305 in[1] = inb(ioaddr[0] + 1); 306 in[2] = inb(ioaddr[0] + 2); 307 in[3] = inb(ioaddr[0] + 3); 308 in[4] = inb(ioaddr[0] + 4); 309 in[0] = inb(ioaddr[0] + 5); 310 in[6] = inb(ioaddr[0] + 6); 311 in[5] = inb(ioaddr[1] + 6); 312 return 0; 313} 314 315/* Card Send Command (cannot be used during an interrupt) */ 316static int 317card_send_command(const int ioaddr[], const char* name, 318 const unsigned char out[], unsigned char in[]) 319{ 320 int status; 321 322 if ((status = card_wait_for_busy_clear(ioaddr, name))) 323 return status; 324 outb(0xa0, ioaddr[0] + 6); 325 outb(out[2], ioaddr[0] + 1); 326 outb(out[3], ioaddr[0] + 2); 327 outb(out[4], ioaddr[0] + 3); 328 outb(out[5], ioaddr[0] + 4); 329 outb(out[1], ioaddr[0] + 5); 330 outb(0xa0, ioaddr[0] + 6); 331 outb(out[0], ioaddr[0] + 7); 332 if (out[0] != 0x20 && out[0] != 0x30) { 333 if ((status = card_wait_for_ready(ioaddr, name, in))) 334 return status; 335 inb(ioaddr[0] + 7); 336 if (sb1000_debug > 3) 337 printk(KERN_DEBUG "%s: card_send_command " 338 "out: %02x%02x%02x%02x%02x%02x " 339 "in: %02x%02x%02x%02x%02x%02x%02x\n", name, 340 out[0], out[1], out[2], out[3], out[4], out[5], 341 in[0], in[1], in[2], in[3], in[4], in[5], in[6]); 342 } else { 343 if (sb1000_debug > 3) 344 printk(KERN_DEBUG "%s: card_send_command " 345 "out: %02x%02x%02x%02x%02x%02x\n", name, 346 out[0], out[1], out[2], out[3], out[4], out[5]); 347 } 348 349 if (out[1] != 0x1b) { 350 if (out[0] >= 0x80 && in[0] != (out[1] | 0x80)) 351 return -EIO; 352 } 353 return 0; 354} 355 356 357/* 358 * SB1000 hardware routines to be used during frame rx interrupt 359 */ 360static const int Sb1000TimeOutJiffies = 7 * HZ; 361 362/* Card Wait For Ready (to be used during frame rx) */ 363static int 364sb1000_wait_for_ready(const int ioaddr[], const char* name) 365{ 366 unsigned long timeout; 367 368 timeout = jiffies + Sb1000TimeOutJiffies; 369 while (inb(ioaddr[1] + 6) & 0x80) { 370 if (time_after_eq(jiffies, timeout)) { 371 printk(KERN_WARNING "%s: sb1000_wait_for_ready timeout\n", 372 name); 373 return -ETIME; 374 } 375 } 376 timeout = jiffies + Sb1000TimeOutJiffies; 377 while (!(inb(ioaddr[1] + 6) & 0x40)) { 378 if (time_after_eq(jiffies, timeout)) { 379 printk(KERN_WARNING "%s: sb1000_wait_for_ready timeout\n", 380 name); 381 return -ETIME; 382 } 383 } 384 inb(ioaddr[0] + 7); 385 return 0; 386} 387 388/* Card Wait For Ready Clear (to be used during frame rx) */ 389static int 390sb1000_wait_for_ready_clear(const int ioaddr[], const char* name) 391{ 392 unsigned long timeout; 393 394 timeout = jiffies + Sb1000TimeOutJiffies; 395 while (inb(ioaddr[1] + 6) & 0x80) { 396 if (time_after_eq(jiffies, timeout)) { 397 printk(KERN_WARNING "%s: sb1000_wait_for_ready_clear timeout\n", 398 name); 399 return -ETIME; 400 } 401 } 402 timeout = jiffies + Sb1000TimeOutJiffies; 403 while (inb(ioaddr[1] + 6) & 0x40) { 404 if (time_after_eq(jiffies, timeout)) { 405 printk(KERN_WARNING "%s: sb1000_wait_for_ready_clear timeout\n", 406 name); 407 return -ETIME; 408 } 409 } 410 return 0; 411} 412 413/* Card Send Command (to be used during frame rx) */ 414static void 415sb1000_send_command(const int ioaddr[], const char* name, 416 const unsigned char out[]) 417{ 418 outb(out[2], ioaddr[0] + 1); 419 outb(out[3], ioaddr[0] + 2); 420 outb(out[4], ioaddr[0] + 3); 421 outb(out[5], ioaddr[0] + 4); 422 outb(out[1], ioaddr[0] + 5); 423 outb(out[0], ioaddr[0] + 7); 424 if (sb1000_debug > 3) 425 printk(KERN_DEBUG "%s: sb1000_send_command out: %02x%02x%02x%02x" 426 "%02x%02x\n", name, out[0], out[1], out[2], out[3], out[4], out[5]); 427} 428 429/* Card Read Status (to be used during frame rx) */ 430static void 431sb1000_read_status(const int ioaddr[], unsigned char in[]) 432{ 433 in[1] = inb(ioaddr[0] + 1); 434 in[2] = inb(ioaddr[0] + 2); 435 in[3] = inb(ioaddr[0] + 3); 436 in[4] = inb(ioaddr[0] + 4); 437 in[0] = inb(ioaddr[0] + 5); 438} 439 440/* Issue Read Command (to be used during frame rx) */ 441static void 442sb1000_issue_read_command(const int ioaddr[], const char* name) 443{ 444 static const unsigned char Command0[6] = {0x20, 0x00, 0x00, 0x01, 0x00, 0x00}; 445 446 sb1000_wait_for_ready_clear(ioaddr, name); 447 outb(0xa0, ioaddr[0] + 6); 448 sb1000_send_command(ioaddr, name, Command0); 449} 450 451 452/* 453 * SB1000 commands for open/configuration 454 */ 455/* reset SB1000 card */ 456static int 457sb1000_reset(const int ioaddr[], const char* name) 458{ 459 static const unsigned char Command0[6] = {0x80, 0x16, 0x00, 0x00, 0x00, 0x00}; 460 461 unsigned char st[7]; 462 int port, status; 463 464 port = ioaddr[1] + 6; 465 outb(0x4, port); 466 inb(port); 467 udelay(1000); 468 outb(0x0, port); 469 inb(port); 470 ssleep(1); 471 outb(0x4, port); 472 inb(port); 473 udelay(1000); 474 outb(0x0, port); 475 inb(port); 476 udelay(0); 477 478 if ((status = card_send_command(ioaddr, name, Command0, st))) 479 return status; 480 if (st[3] != 0xf0) 481 return -EIO; 482 return 0; 483} 484 485/* check SB1000 firmware CRC */ 486static int 487sb1000_check_CRC(const int ioaddr[], const char* name) 488{ 489 static const unsigned char Command0[6] = {0x80, 0x1f, 0x00, 0x00, 0x00, 0x00}; 490 491 unsigned char st[7]; 492 int status; 493 494 /* check CRC */ 495 if ((status = card_send_command(ioaddr, name, Command0, st))) 496 return status; 497 if (st[1] != st[3] || st[2] != st[4]) 498 return -EIO; 499 return 0; 500} 501 502static inline int 503sb1000_start_get_set_command(const int ioaddr[], const char* name) 504{ 505 static const unsigned char Command0[6] = {0x80, 0x1b, 0x00, 0x00, 0x00, 0x00}; 506 507 unsigned char st[7]; 508 509 return card_send_command(ioaddr, name, Command0, st); 510} 511 512static int 513sb1000_end_get_set_command(const int ioaddr[], const char* name) 514{ 515 static const unsigned char Command0[6] = {0x80, 0x1b, 0x02, 0x00, 0x00, 0x00}; 516 static const unsigned char Command1[6] = {0x20, 0x00, 0x00, 0x00, 0x00, 0x00}; 517 518 unsigned char st[7]; 519 int status; 520 521 if ((status = card_send_command(ioaddr, name, Command0, st))) 522 return status; 523 return card_send_command(ioaddr, name, Command1, st); 524} 525 526static int 527sb1000_activate(const int ioaddr[], const char* name) 528{ 529 static const unsigned char Command0[6] = {0x80, 0x11, 0x00, 0x00, 0x00, 0x00}; 530 static const unsigned char Command1[6] = {0x80, 0x16, 0x00, 0x00, 0x00, 0x00}; 531 532 unsigned char st[7]; 533 int status; 534 535 ssleep(1); 536 status = card_send_command(ioaddr, name, Command0, st); 537 if (status) 538 return status; 539 status = card_send_command(ioaddr, name, Command1, st); 540 if (status) 541 return status; 542 if (st[3] != 0xf1) { 543 status = sb1000_start_get_set_command(ioaddr, name); 544 if (status) 545 return status; 546 return -EIO; 547 } 548 udelay(1000); 549 return sb1000_start_get_set_command(ioaddr, name); 550} 551 552/* get SB1000 firmware version */ 553static int 554sb1000_get_firmware_version(const int ioaddr[], const char* name, 555 unsigned char version[], int do_end) 556{ 557 static const unsigned char Command0[6] = {0x80, 0x23, 0x00, 0x00, 0x00, 0x00}; 558 559 unsigned char st[7]; 560 int status; 561 562 if ((status = sb1000_start_get_set_command(ioaddr, name))) 563 return status; 564 if ((status = card_send_command(ioaddr, name, Command0, st))) 565 return status; 566 if (st[0] != 0xa3) 567 return -EIO; 568 version[0] = st[1]; 569 version[1] = st[2]; 570 if (do_end) 571 return sb1000_end_get_set_command(ioaddr, name); 572 else 573 return 0; 574} 575 576/* get SB1000 frequency */ 577static int 578sb1000_get_frequency(const int ioaddr[], const char* name, int* frequency) 579{ 580 static const unsigned char Command0[6] = {0x80, 0x44, 0x00, 0x00, 0x00, 0x00}; 581 582 unsigned char st[7]; 583 int status; 584 585 udelay(1000); 586 if ((status = sb1000_start_get_set_command(ioaddr, name))) 587 return status; 588 if ((status = card_send_command(ioaddr, name, Command0, st))) 589 return status; 590 *frequency = ((st[1] << 8 | st[2]) << 8 | st[3]) << 8 | st[4]; 591 return sb1000_end_get_set_command(ioaddr, name); 592} 593 594/* set SB1000 frequency */ 595static int 596sb1000_set_frequency(const int ioaddr[], const char* name, int frequency) 597{ 598 unsigned char st[7]; 599 int status; 600 unsigned char Command0[6] = {0x80, 0x29, 0x00, 0x00, 0x00, 0x00}; 601 602 const int FrequencyLowerLimit = 57000; 603 const int FrequencyUpperLimit = 804000; 604 605 if (frequency < FrequencyLowerLimit || frequency > FrequencyUpperLimit) { 606 printk(KERN_ERR "%s: frequency chosen (%d kHz) is not in the range " 607 "[%d,%d] kHz\n", name, frequency, FrequencyLowerLimit, 608 FrequencyUpperLimit); 609 return -EINVAL; 610 } 611 udelay(1000); 612 if ((status = sb1000_start_get_set_command(ioaddr, name))) 613 return status; 614 Command0[5] = frequency & 0xff; 615 frequency >>= 8; 616 Command0[4] = frequency & 0xff; 617 frequency >>= 8; 618 Command0[3] = frequency & 0xff; 619 frequency >>= 8; 620 Command0[2] = frequency & 0xff; 621 return card_send_command(ioaddr, name, Command0, st); 622} 623 624/* get SB1000 PIDs */ 625static int 626sb1000_get_PIDs(const int ioaddr[], const char* name, short PID[]) 627{ 628 static const unsigned char Command0[6] = {0x80, 0x40, 0x00, 0x00, 0x00, 0x00}; 629 static const unsigned char Command1[6] = {0x80, 0x41, 0x00, 0x00, 0x00, 0x00}; 630 static const unsigned char Command2[6] = {0x80, 0x42, 0x00, 0x00, 0x00, 0x00}; 631 static const unsigned char Command3[6] = {0x80, 0x43, 0x00, 0x00, 0x00, 0x00}; 632 633 unsigned char st[7]; 634 int status; 635 636 udelay(1000); 637 if ((status = sb1000_start_get_set_command(ioaddr, name))) 638 return status; 639 640 if ((status = card_send_command(ioaddr, name, Command0, st))) 641 return status; 642 PID[0] = st[1] << 8 | st[2]; 643 644 if ((status = card_send_command(ioaddr, name, Command1, st))) 645 return status; 646 PID[1] = st[1] << 8 | st[2]; 647 648 if ((status = card_send_command(ioaddr, name, Command2, st))) 649 return status; 650 PID[2] = st[1] << 8 | st[2]; 651 652 if ((status = card_send_command(ioaddr, name, Command3, st))) 653 return status; 654 PID[3] = st[1] << 8 | st[2]; 655 656 return sb1000_end_get_set_command(ioaddr, name); 657} 658 659/* set SB1000 PIDs */ 660static int 661sb1000_set_PIDs(const int ioaddr[], const char* name, const short PID[]) 662{ 663 static const unsigned char Command4[6] = {0x80, 0x2e, 0x00, 0x00, 0x00, 0x00}; 664 665 unsigned char st[7]; 666 short p; 667 int status; 668 unsigned char Command0[6] = {0x80, 0x31, 0x00, 0x00, 0x00, 0x00}; 669 unsigned char Command1[6] = {0x80, 0x32, 0x00, 0x00, 0x00, 0x00}; 670 unsigned char Command2[6] = {0x80, 0x33, 0x00, 0x00, 0x00, 0x00}; 671 unsigned char Command3[6] = {0x80, 0x34, 0x00, 0x00, 0x00, 0x00}; 672 673 udelay(1000); 674 if ((status = sb1000_start_get_set_command(ioaddr, name))) 675 return status; 676 677 p = PID[0]; 678 Command0[3] = p & 0xff; 679 p >>= 8; 680 Command0[2] = p & 0xff; 681 if ((status = card_send_command(ioaddr, name, Command0, st))) 682 return status; 683 684 p = PID[1]; 685 Command1[3] = p & 0xff; 686 p >>= 8; 687 Command1[2] = p & 0xff; 688 if ((status = card_send_command(ioaddr, name, Command1, st))) 689 return status; 690 691 p = PID[2]; 692 Command2[3] = p & 0xff; 693 p >>= 8; 694 Command2[2] = p & 0xff; 695 if ((status = card_send_command(ioaddr, name, Command2, st))) 696 return status; 697 698 p = PID[3]; 699 Command3[3] = p & 0xff; 700 p >>= 8; 701 Command3[2] = p & 0xff; 702 if ((status = card_send_command(ioaddr, name, Command3, st))) 703 return status; 704 705 if ((status = card_send_command(ioaddr, name, Command4, st))) 706 return status; 707 return sb1000_end_get_set_command(ioaddr, name); 708} 709 710 711static void 712sb1000_print_status_buffer(const char* name, unsigned char st[], 713 unsigned char buffer[], int size) 714{ 715 int i, j, k; 716 717 printk(KERN_DEBUG "%s: status: %02x %02x\n", name, st[0], st[1]); 718 if (buffer[24] == 0x08 && buffer[25] == 0x00 && buffer[26] == 0x45) { 719 printk(KERN_DEBUG "%s: length: %d protocol: %d from: %d.%d.%d.%d:%d " 720 "to %d.%d.%d.%d:%d\n", name, buffer[28] << 8 | buffer[29], 721 buffer[35], buffer[38], buffer[39], buffer[40], buffer[41], 722 buffer[46] << 8 | buffer[47], 723 buffer[42], buffer[43], buffer[44], buffer[45], 724 buffer[48] << 8 | buffer[49]); 725 } else { 726 for (i = 0, k = 0; i < (size + 7) / 8; i++) { 727 printk(KERN_DEBUG "%s: %s", name, i ? " " : "buffer:"); 728 for (j = 0; j < 8 && k < size; j++, k++) 729 printk(" %02x", buffer[k]); 730 printk("\n"); 731 } 732 } 733} 734 735/* 736 * SB1000 commands for frame rx interrupt 737 */ 738/* receive a single frame and assemble datagram 739 * (this is the heart of the interrupt routine) 740 */ 741static int 742sb1000_rx(struct net_device *dev) 743{ 744 745#define FRAMESIZE 184 746 unsigned char st[2], buffer[FRAMESIZE], session_id, frame_id; 747 short dlen; 748 int ioaddr, ns; 749 unsigned int skbsize; 750 struct sk_buff *skb; 751 struct sb1000_private *lp = netdev_priv(dev); 752 struct net_device_stats *stats = &dev->stats; 753 754 /* SB1000 frame constants */ 755 const int FrameSize = FRAMESIZE; 756 const int NewDatagramHeaderSkip = 8; 757 const int NewDatagramHeaderSize = NewDatagramHeaderSkip + 18; 758 const int NewDatagramDataSize = FrameSize - NewDatagramHeaderSize; 759 const int ContDatagramHeaderSkip = 7; 760 const int ContDatagramHeaderSize = ContDatagramHeaderSkip + 1; 761 const int ContDatagramDataSize = FrameSize - ContDatagramHeaderSize; 762 const int TrailerSize = 4; 763 764 ioaddr = dev->base_addr; 765 766 insw(ioaddr, (unsigned short*) st, 1); 767#ifdef XXXDEBUG 768printk("cm0: received: %02x %02x\n", st[0], st[1]); 769#endif /* XXXDEBUG */ 770 lp->rx_frames++; 771 772 /* decide if it is a good or bad frame */ 773 for (ns = 0; ns < NPIDS; ns++) { 774 session_id = lp->rx_session_id[ns]; 775 frame_id = lp->rx_frame_id[ns]; 776 if (st[0] == session_id) { 777 if (st[1] == frame_id || (!frame_id && (st[1] & 0xf0) == 0x30)) { 778 goto good_frame; 779 } else if ((st[1] & 0xf0) == 0x30 && (st[0] & 0x40)) { 780 goto skipped_frame; 781 } else { 782 goto bad_frame; 783 } 784 } else if (st[0] == (session_id | 0x40)) { 785 if ((st[1] & 0xf0) == 0x30) { 786 goto skipped_frame; 787 } else { 788 goto bad_frame; 789 } 790 } 791 } 792 goto bad_frame; 793 794skipped_frame: 795 stats->rx_frame_errors++; 796 skb = lp->rx_skb[ns]; 797 if (sb1000_debug > 1) 798 printk(KERN_WARNING "%s: missing frame(s): got %02x %02x " 799 "expecting %02x %02x\n", dev->name, st[0], st[1], 800 skb ? session_id : session_id | 0x40, frame_id); 801 if (skb) { 802 dev_kfree_skb(skb); 803 skb = NULL; 804 } 805 806good_frame: 807 lp->rx_frame_id[ns] = 0x30 | ((st[1] + 1) & 0x0f); 808 /* new datagram */ 809 if (st[0] & 0x40) { 810 /* get data length */ 811 insw(ioaddr, buffer, NewDatagramHeaderSize / 2); 812#ifdef XXXDEBUG 813printk("cm0: IP identification: %02x%02x fragment offset: %02x%02x\n", buffer[30], buffer[31], buffer[32], buffer[33]); 814#endif /* XXXDEBUG */ 815 if (buffer[0] != NewDatagramHeaderSkip) { 816 if (sb1000_debug > 1) 817 printk(KERN_WARNING "%s: new datagram header skip error: " 818 "got %02x expecting %02x\n", dev->name, buffer[0], 819 NewDatagramHeaderSkip); 820 stats->rx_length_errors++; 821 insw(ioaddr, buffer, NewDatagramDataSize / 2); 822 goto bad_frame_next; 823 } 824 dlen = ((buffer[NewDatagramHeaderSkip + 3] & 0x0f) << 8 | 825 buffer[NewDatagramHeaderSkip + 4]) - 17; 826 if (dlen > SB1000_MRU) { 827 if (sb1000_debug > 1) 828 printk(KERN_WARNING "%s: datagram length (%d) greater " 829 "than MRU (%d)\n", dev->name, dlen, SB1000_MRU); 830 stats->rx_length_errors++; 831 insw(ioaddr, buffer, NewDatagramDataSize / 2); 832 goto bad_frame_next; 833 } 834 lp->rx_dlen[ns] = dlen; 835 /* compute size to allocate for datagram */ 836 skbsize = dlen + FrameSize; 837 if ((skb = alloc_skb(skbsize, GFP_ATOMIC)) == NULL) { 838 if (sb1000_debug > 1) 839 printk(KERN_WARNING "%s: can't allocate %d bytes long " 840 "skbuff\n", dev->name, skbsize); 841 stats->rx_dropped++; 842 insw(ioaddr, buffer, NewDatagramDataSize / 2); 843 goto dropped_frame; 844 } 845 skb->dev = dev; 846 skb_reset_mac_header(skb); 847 skb->protocol = (unsigned short) buffer[NewDatagramHeaderSkip + 16]; 848 insw(ioaddr, skb_put(skb, NewDatagramDataSize), 849 NewDatagramDataSize / 2); 850 lp->rx_skb[ns] = skb; 851 } else { 852 /* continuation of previous datagram */ 853 insw(ioaddr, buffer, ContDatagramHeaderSize / 2); 854 if (buffer[0] != ContDatagramHeaderSkip) { 855 if (sb1000_debug > 1) 856 printk(KERN_WARNING "%s: cont datagram header skip error: " 857 "got %02x expecting %02x\n", dev->name, buffer[0], 858 ContDatagramHeaderSkip); 859 stats->rx_length_errors++; 860 insw(ioaddr, buffer, ContDatagramDataSize / 2); 861 goto bad_frame_next; 862 } 863 skb = lp->rx_skb[ns]; 864 insw(ioaddr, skb_put(skb, ContDatagramDataSize), 865 ContDatagramDataSize / 2); 866 dlen = lp->rx_dlen[ns]; 867 } 868 if (skb->len < dlen + TrailerSize) { 869 lp->rx_session_id[ns] &= ~0x40; 870 return 0; 871 } 872 873 /* datagram completed: send to upper level */ 874 skb_trim(skb, dlen); 875 __netif_rx(skb); 876 stats->rx_bytes+=dlen; 877 stats->rx_packets++; 878 lp->rx_skb[ns] = NULL; 879 lp->rx_session_id[ns] |= 0x40; 880 return 0; 881 882bad_frame: 883 insw(ioaddr, buffer, FrameSize / 2); 884 if (sb1000_debug > 1) 885 printk(KERN_WARNING "%s: frame error: got %02x %02x\n", 886 dev->name, st[0], st[1]); 887 stats->rx_frame_errors++; 888bad_frame_next: 889 if (sb1000_debug > 2) 890 sb1000_print_status_buffer(dev->name, st, buffer, FrameSize); 891dropped_frame: 892 stats->rx_errors++; 893 if (ns < NPIDS) { 894 if ((skb = lp->rx_skb[ns])) { 895 dev_kfree_skb(skb); 896 lp->rx_skb[ns] = NULL; 897 } 898 lp->rx_session_id[ns] |= 0x40; 899 } 900 return -1; 901} 902 903static void 904sb1000_error_dpc(struct net_device *dev) 905{ 906 static const unsigned char Command0[6] = {0x80, 0x26, 0x00, 0x00, 0x00, 0x00}; 907 908 char *name; 909 unsigned char st[5]; 910 int ioaddr[2]; 911 struct sb1000_private *lp = netdev_priv(dev); 912 const int ErrorDpcCounterInitialize = 200; 913 914 ioaddr[0] = dev->base_addr; 915 /* mem_start holds the second I/O address */ 916 ioaddr[1] = dev->mem_start; 917 name = dev->name; 918 919 sb1000_wait_for_ready_clear(ioaddr, name); 920 sb1000_send_command(ioaddr, name, Command0); 921 sb1000_wait_for_ready(ioaddr, name); 922 sb1000_read_status(ioaddr, st); 923 if (st[1] & 0x10) 924 lp->rx_error_dpc_count = ErrorDpcCounterInitialize; 925} 926 927 928/* 929 * Linux interface functions 930 */ 931static int 932sb1000_open(struct net_device *dev) 933{ 934 char *name; 935 int ioaddr[2], status; 936 struct sb1000_private *lp = netdev_priv(dev); 937 const unsigned short FirmwareVersion[] = {0x01, 0x01}; 938 939 ioaddr[0] = dev->base_addr; 940 /* mem_start holds the second I/O address */ 941 ioaddr[1] = dev->mem_start; 942 name = dev->name; 943 944 /* initialize sb1000 */ 945 if ((status = sb1000_reset(ioaddr, name))) 946 return status; 947 ssleep(1); 948 if ((status = sb1000_check_CRC(ioaddr, name))) 949 return status; 950 951 /* initialize private data before board can catch interrupts */ 952 lp->rx_skb[0] = NULL; 953 lp->rx_skb[1] = NULL; 954 lp->rx_skb[2] = NULL; 955 lp->rx_skb[3] = NULL; 956 lp->rx_dlen[0] = 0; 957 lp->rx_dlen[1] = 0; 958 lp->rx_dlen[2] = 0; 959 lp->rx_dlen[3] = 0; 960 lp->rx_frames = 0; 961 lp->rx_error_count = 0; 962 lp->rx_error_dpc_count = 0; 963 lp->rx_session_id[0] = 0x50; 964 lp->rx_session_id[1] = 0x48; 965 lp->rx_session_id[2] = 0x44; 966 lp->rx_session_id[3] = 0x42; 967 lp->rx_frame_id[0] = 0; 968 lp->rx_frame_id[1] = 0; 969 lp->rx_frame_id[2] = 0; 970 lp->rx_frame_id[3] = 0; 971 if (request_irq(dev->irq, sb1000_interrupt, 0, "sb1000", dev)) { 972 return -EAGAIN; 973 } 974 975 if (sb1000_debug > 2) 976 printk(KERN_DEBUG "%s: Opening, IRQ %d\n", name, dev->irq); 977 978 /* Activate board and check firmware version */ 979 udelay(1000); 980 if ((status = sb1000_activate(ioaddr, name))) 981 return status; 982 udelay(0); 983 if ((status = sb1000_get_firmware_version(ioaddr, name, version, 0))) 984 return status; 985 if (version[0] != FirmwareVersion[0] || version[1] != FirmwareVersion[1]) 986 printk(KERN_WARNING "%s: found firmware version %x.%02x " 987 "(should be %x.%02x)\n", name, version[0], version[1], 988 FirmwareVersion[0], FirmwareVersion[1]); 989 990 991 netif_start_queue(dev); 992 return 0; /* Always succeed */ 993} 994 995static int sb1000_siocdevprivate(struct net_device *dev, struct ifreq *ifr, 996 void __user *data, int cmd) 997{ 998 char* name; 999 unsigned char version[2]; 1000 short PID[4]; 1001 int ioaddr[2], status, frequency; 1002 unsigned int stats[5]; 1003 struct sb1000_private *lp = netdev_priv(dev); 1004 1005 if (!(dev && dev->flags & IFF_UP)) 1006 return -ENODEV; 1007 1008 ioaddr[0] = dev->base_addr; 1009 /* mem_start holds the second I/O address */ 1010 ioaddr[1] = dev->mem_start; 1011 name = dev->name; 1012 1013 switch (cmd) { 1014 case SIOCGCMSTATS: /* get statistics */ 1015 stats[0] = dev->stats.rx_bytes; 1016 stats[1] = lp->rx_frames; 1017 stats[2] = dev->stats.rx_packets; 1018 stats[3] = dev->stats.rx_errors; 1019 stats[4] = dev->stats.rx_dropped; 1020 if (copy_to_user(data, stats, sizeof(stats))) 1021 return -EFAULT; 1022 status = 0; 1023 break; 1024 1025 case SIOCGCMFIRMWARE: /* get firmware version */ 1026 if ((status = sb1000_get_firmware_version(ioaddr, name, version, 1))) 1027 return status; 1028 if (copy_to_user(data, version, sizeof(version))) 1029 return -EFAULT; 1030 break; 1031 1032 case SIOCGCMFREQUENCY: /* get frequency */ 1033 if ((status = sb1000_get_frequency(ioaddr, name, &frequency))) 1034 return status; 1035 if (put_user(frequency, (int __user *)data)) 1036 return -EFAULT; 1037 break; 1038 1039 case SIOCSCMFREQUENCY: /* set frequency */ 1040 if (!capable(CAP_NET_ADMIN)) 1041 return -EPERM; 1042 if (get_user(frequency, (int __user *)data)) 1043 return -EFAULT; 1044 if ((status = sb1000_set_frequency(ioaddr, name, frequency))) 1045 return status; 1046 break; 1047 1048 case SIOCGCMPIDS: /* get PIDs */ 1049 if ((status = sb1000_get_PIDs(ioaddr, name, PID))) 1050 return status; 1051 if (copy_to_user(data, PID, sizeof(PID))) 1052 return -EFAULT; 1053 break; 1054 1055 case SIOCSCMPIDS: /* set PIDs */ 1056 if (!capable(CAP_NET_ADMIN)) 1057 return -EPERM; 1058 if (copy_from_user(PID, data, sizeof(PID))) 1059 return -EFAULT; 1060 if ((status = sb1000_set_PIDs(ioaddr, name, PID))) 1061 return status; 1062 /* set session_id, frame_id and pkt_type too */ 1063 lp->rx_session_id[0] = 0x50 | (PID[0] & 0x0f); 1064 lp->rx_session_id[1] = 0x48; 1065 lp->rx_session_id[2] = 0x44; 1066 lp->rx_session_id[3] = 0x42; 1067 lp->rx_frame_id[0] = 0; 1068 lp->rx_frame_id[1] = 0; 1069 lp->rx_frame_id[2] = 0; 1070 lp->rx_frame_id[3] = 0; 1071 break; 1072 1073 default: 1074 status = -EINVAL; 1075 break; 1076 } 1077 return status; 1078} 1079 1080/* transmit function: do nothing since SB1000 can't send anything out */ 1081static netdev_tx_t 1082sb1000_start_xmit(struct sk_buff *skb, struct net_device *dev) 1083{ 1084 printk(KERN_WARNING "%s: trying to transmit!!!\n", dev->name); 1085 /* sb1000 can't xmit datagrams */ 1086 dev_kfree_skb(skb); 1087 return NETDEV_TX_OK; 1088} 1089 1090/* SB1000 interrupt handler. */ 1091static irqreturn_t sb1000_interrupt(int irq, void *dev_id) 1092{ 1093 static const unsigned char Command0[6] = {0x80, 0x2c, 0x00, 0x00, 0x00, 0x00}; 1094 static const unsigned char Command1[6] = {0x80, 0x2e, 0x00, 0x00, 0x00, 0x00}; 1095 1096 char *name; 1097 unsigned char st; 1098 int ioaddr[2]; 1099 struct net_device *dev = dev_id; 1100 struct sb1000_private *lp = netdev_priv(dev); 1101 1102 const int MaxRxErrorCount = 6; 1103 1104 ioaddr[0] = dev->base_addr; 1105 /* mem_start holds the second I/O address */ 1106 ioaddr[1] = dev->mem_start; 1107 name = dev->name; 1108 1109 /* is it a good interrupt? */ 1110 st = inb(ioaddr[1] + 6); 1111 if (!(st & 0x08 && st & 0x20)) { 1112 return IRQ_NONE; 1113 } 1114 1115 if (sb1000_debug > 3) 1116 printk(KERN_DEBUG "%s: entering interrupt\n", dev->name); 1117 1118 st = inb(ioaddr[0] + 7); 1119 if (sb1000_rx(dev)) 1120 lp->rx_error_count++; 1121#ifdef SB1000_DELAY 1122 udelay(SB1000_DELAY); 1123#endif /* SB1000_DELAY */ 1124 sb1000_issue_read_command(ioaddr, name); 1125 if (st & 0x01) { 1126 sb1000_error_dpc(dev); 1127 sb1000_issue_read_command(ioaddr, name); 1128 } 1129 if (lp->rx_error_dpc_count && !(--lp->rx_error_dpc_count)) { 1130 sb1000_wait_for_ready_clear(ioaddr, name); 1131 sb1000_send_command(ioaddr, name, Command0); 1132 sb1000_wait_for_ready(ioaddr, name); 1133 sb1000_issue_read_command(ioaddr, name); 1134 } 1135 if (lp->rx_error_count >= MaxRxErrorCount) { 1136 sb1000_wait_for_ready_clear(ioaddr, name); 1137 sb1000_send_command(ioaddr, name, Command1); 1138 sb1000_wait_for_ready(ioaddr, name); 1139 sb1000_issue_read_command(ioaddr, name); 1140 lp->rx_error_count = 0; 1141 } 1142 1143 return IRQ_HANDLED; 1144} 1145 1146static int sb1000_close(struct net_device *dev) 1147{ 1148 int i; 1149 int ioaddr[2]; 1150 struct sb1000_private *lp = netdev_priv(dev); 1151 1152 if (sb1000_debug > 2) 1153 printk(KERN_DEBUG "%s: Shutting down sb1000.\n", dev->name); 1154 1155 netif_stop_queue(dev); 1156 1157 ioaddr[0] = dev->base_addr; 1158 /* mem_start holds the second I/O address */ 1159 ioaddr[1] = dev->mem_start; 1160 1161 free_irq(dev->irq, dev); 1162 /* If we don't do this, we can't re-insmod it later. */ 1163 release_region(ioaddr[1], SB1000_IO_EXTENT); 1164 release_region(ioaddr[0], SB1000_IO_EXTENT); 1165 1166 /* free rx_skb's if needed */ 1167 for (i=0; i<4; i++) { 1168 if (lp->rx_skb[i]) { 1169 dev_kfree_skb(lp->rx_skb[i]); 1170 } 1171 } 1172 return 0; 1173} 1174 1175MODULE_AUTHOR("Franco Venturi <fventuri@mediaone.net>"); 1176MODULE_DESCRIPTION("General Instruments SB1000 driver"); 1177MODULE_LICENSE("GPL"); 1178 1179module_pnp_driver(sb1000_driver); 1180