1// SPDX-License-Identifier: GPL-2.0-only 2/**************************************************************************** 3 * Driver for Solarflare network controllers and boards 4 * Copyright 2007-2011 Solarflare Communications Inc. 5 */ 6 7#include <linux/delay.h> 8#include <linux/rtnetlink.h> 9#include <linux/seq_file.h> 10#include <linux/slab.h> 11#include "efx.h" 12#include "mdio_10g.h" 13#include "nic.h" 14#include "phy.h" 15#include "workarounds.h" 16 17/* We expect these MMDs to be in the package. */ 18#define TENXPRESS_REQUIRED_DEVS (MDIO_DEVS_PMAPMD | \ 19 MDIO_DEVS_PCS | \ 20 MDIO_DEVS_PHYXS | \ 21 MDIO_DEVS_AN) 22 23#define SFX7101_LOOPBACKS ((1 << LOOPBACK_PHYXS) | \ 24 (1 << LOOPBACK_PCS) | \ 25 (1 << LOOPBACK_PMAPMD) | \ 26 (1 << LOOPBACK_PHYXS_WS)) 27 28/* We complain if we fail to see the link partner as 10G capable this many 29 * times in a row (must be > 1 as sampling the autoneg. registers is racy) 30 */ 31#define MAX_BAD_LP_TRIES (5) 32 33/* Extended control register */ 34#define PMA_PMD_XCONTROL_REG 49152 35#define PMA_PMD_EXT_GMII_EN_LBN 1 36#define PMA_PMD_EXT_GMII_EN_WIDTH 1 37#define PMA_PMD_EXT_CLK_OUT_LBN 2 38#define PMA_PMD_EXT_CLK_OUT_WIDTH 1 39#define PMA_PMD_LNPGA_POWERDOWN_LBN 8 40#define PMA_PMD_LNPGA_POWERDOWN_WIDTH 1 41#define PMA_PMD_EXT_CLK312_WIDTH 1 42#define PMA_PMD_EXT_LPOWER_LBN 12 43#define PMA_PMD_EXT_LPOWER_WIDTH 1 44#define PMA_PMD_EXT_ROBUST_LBN 14 45#define PMA_PMD_EXT_ROBUST_WIDTH 1 46#define PMA_PMD_EXT_SSR_LBN 15 47#define PMA_PMD_EXT_SSR_WIDTH 1 48 49/* extended status register */ 50#define PMA_PMD_XSTATUS_REG 49153 51#define PMA_PMD_XSTAT_MDIX_LBN 14 52#define PMA_PMD_XSTAT_FLP_LBN (12) 53 54/* LED control register */ 55#define PMA_PMD_LED_CTRL_REG 49159 56#define PMA_PMA_LED_ACTIVITY_LBN (3) 57 58/* LED function override register */ 59#define PMA_PMD_LED_OVERR_REG 49161 60/* Bit positions for different LEDs (there are more but not wired on SFE4001)*/ 61#define PMA_PMD_LED_LINK_LBN (0) 62#define PMA_PMD_LED_SPEED_LBN (2) 63#define PMA_PMD_LED_TX_LBN (4) 64#define PMA_PMD_LED_RX_LBN (6) 65/* Override settings */ 66#define PMA_PMD_LED_AUTO (0) /* H/W control */ 67#define PMA_PMD_LED_ON (1) 68#define PMA_PMD_LED_OFF (2) 69#define PMA_PMD_LED_FLASH (3) 70#define PMA_PMD_LED_MASK 3 71/* All LEDs under hardware control */ 72/* Green and Amber under hardware control, Red off */ 73#define SFX7101_PMA_PMD_LED_DEFAULT (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN) 74 75#define PMA_PMD_SPEED_ENABLE_REG 49192 76#define PMA_PMD_100TX_ADV_LBN 1 77#define PMA_PMD_100TX_ADV_WIDTH 1 78#define PMA_PMD_1000T_ADV_LBN 2 79#define PMA_PMD_1000T_ADV_WIDTH 1 80#define PMA_PMD_10000T_ADV_LBN 3 81#define PMA_PMD_10000T_ADV_WIDTH 1 82#define PMA_PMD_SPEED_LBN 4 83#define PMA_PMD_SPEED_WIDTH 4 84 85/* Misc register defines */ 86#define PCS_CLOCK_CTRL_REG 55297 87#define PLL312_RST_N_LBN 2 88 89#define PCS_SOFT_RST2_REG 55302 90#define SERDES_RST_N_LBN 13 91#define XGXS_RST_N_LBN 12 92 93#define PCS_TEST_SELECT_REG 55303 /* PRM 10.5.8 */ 94#define CLK312_EN_LBN 3 95 96/* PHYXS registers */ 97#define PHYXS_XCONTROL_REG 49152 98#define PHYXS_RESET_LBN 15 99#define PHYXS_RESET_WIDTH 1 100 101#define PHYXS_TEST1 (49162) 102#define LOOPBACK_NEAR_LBN (8) 103#define LOOPBACK_NEAR_WIDTH (1) 104 105/* Boot status register */ 106#define PCS_BOOT_STATUS_REG 53248 107#define PCS_BOOT_FATAL_ERROR_LBN 0 108#define PCS_BOOT_PROGRESS_LBN 1 109#define PCS_BOOT_PROGRESS_WIDTH 2 110#define PCS_BOOT_PROGRESS_INIT 0 111#define PCS_BOOT_PROGRESS_WAIT_MDIO 1 112#define PCS_BOOT_PROGRESS_CHECKSUM 2 113#define PCS_BOOT_PROGRESS_JUMP 3 114#define PCS_BOOT_DOWNLOAD_WAIT_LBN 3 115#define PCS_BOOT_CODE_STARTED_LBN 4 116 117/* 100M/1G PHY registers */ 118#define GPHY_XCONTROL_REG 49152 119#define GPHY_ISOLATE_LBN 10 120#define GPHY_ISOLATE_WIDTH 1 121#define GPHY_DUPLEX_LBN 8 122#define GPHY_DUPLEX_WIDTH 1 123#define GPHY_LOOPBACK_NEAR_LBN 14 124#define GPHY_LOOPBACK_NEAR_WIDTH 1 125 126#define C22EXT_STATUS_REG 49153 127#define C22EXT_STATUS_LINK_LBN 2 128#define C22EXT_STATUS_LINK_WIDTH 1 129 130#define C22EXT_MSTSLV_CTRL 49161 131#define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN 8 132#define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN 9 133 134#define C22EXT_MSTSLV_STATUS 49162 135#define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN 10 136#define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN 11 137 138/* Time to wait between powering down the LNPGA and turning off the power 139 * rails */ 140#define LNPGA_PDOWN_WAIT (HZ / 5) 141 142struct tenxpress_phy_data { 143 enum ef4_loopback_mode loopback_mode; 144 enum ef4_phy_mode phy_mode; 145 int bad_lp_tries; 146}; 147 148static int tenxpress_init(struct ef4_nic *efx) 149{ 150 /* Enable 312.5 MHz clock */ 151 ef4_mdio_write(efx, MDIO_MMD_PCS, PCS_TEST_SELECT_REG, 152 1 << CLK312_EN_LBN); 153 154 /* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */ 155 ef4_mdio_set_flag(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG, 156 1 << PMA_PMA_LED_ACTIVITY_LBN, true); 157 ef4_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, 158 SFX7101_PMA_PMD_LED_DEFAULT); 159 160 return 0; 161} 162 163static int tenxpress_phy_probe(struct ef4_nic *efx) 164{ 165 struct tenxpress_phy_data *phy_data; 166 167 /* Allocate phy private storage */ 168 phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); 169 if (!phy_data) 170 return -ENOMEM; 171 efx->phy_data = phy_data; 172 phy_data->phy_mode = efx->phy_mode; 173 174 efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; 175 efx->mdio.mode_support = MDIO_SUPPORTS_C45; 176 177 efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS; 178 179 efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg | 180 ADVERTISED_10000baseT_Full); 181 182 return 0; 183} 184 185static int tenxpress_phy_init(struct ef4_nic *efx) 186{ 187 int rc; 188 189 falcon_board(efx)->type->init_phy(efx); 190 191 if (!(efx->phy_mode & PHY_MODE_SPECIAL)) { 192 rc = ef4_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); 193 if (rc < 0) 194 return rc; 195 196 rc = ef4_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS); 197 if (rc < 0) 198 return rc; 199 } 200 201 rc = tenxpress_init(efx); 202 if (rc < 0) 203 return rc; 204 205 /* Reinitialise flow control settings */ 206 ef4_link_set_wanted_fc(efx, efx->wanted_fc); 207 ef4_mdio_an_reconfigure(efx); 208 209 schedule_timeout_uninterruptible(HZ / 5); /* 200ms */ 210 211 /* Let XGXS and SerDes out of reset */ 212 falcon_reset_xaui(efx); 213 214 return 0; 215} 216 217/* Perform a "special software reset" on the PHY. The caller is 218 * responsible for saving and restoring the PHY hardware registers 219 * properly, and masking/unmasking LASI */ 220static int tenxpress_special_reset(struct ef4_nic *efx) 221{ 222 int rc, reg; 223 224 /* The XGMAC clock is driven from the SFX7101 312MHz clock, so 225 * a special software reset can glitch the XGMAC sufficiently for stats 226 * requests to fail. */ 227 falcon_stop_nic_stats(efx); 228 229 /* Initiate reset */ 230 reg = ef4_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG); 231 reg |= (1 << PMA_PMD_EXT_SSR_LBN); 232 ef4_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); 233 234 mdelay(200); 235 236 /* Wait for the blocks to come out of reset */ 237 rc = ef4_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); 238 if (rc < 0) 239 goto out; 240 241 /* Try and reconfigure the device */ 242 rc = tenxpress_init(efx); 243 if (rc < 0) 244 goto out; 245 246 /* Wait for the XGXS state machine to churn */ 247 mdelay(10); 248out: 249 falcon_start_nic_stats(efx); 250 return rc; 251} 252 253static void sfx7101_check_bad_lp(struct ef4_nic *efx, bool link_ok) 254{ 255 struct tenxpress_phy_data *pd = efx->phy_data; 256 bool bad_lp; 257 int reg; 258 259 if (link_ok) { 260 bad_lp = false; 261 } else { 262 /* Check that AN has started but not completed. */ 263 reg = ef4_mdio_read(efx, MDIO_MMD_AN, MDIO_STAT1); 264 if (!(reg & MDIO_AN_STAT1_LPABLE)) 265 return; /* LP status is unknown */ 266 bad_lp = !(reg & MDIO_AN_STAT1_COMPLETE); 267 if (bad_lp) 268 pd->bad_lp_tries++; 269 } 270 271 /* Nothing to do if all is well and was previously so. */ 272 if (!pd->bad_lp_tries) 273 return; 274 275 /* Use the RX (red) LED as an error indicator once we've seen AN 276 * failure several times in a row, and also log a message. */ 277 if (!bad_lp || pd->bad_lp_tries == MAX_BAD_LP_TRIES) { 278 reg = ef4_mdio_read(efx, MDIO_MMD_PMAPMD, 279 PMA_PMD_LED_OVERR_REG); 280 reg &= ~(PMA_PMD_LED_MASK << PMA_PMD_LED_RX_LBN); 281 if (!bad_lp) { 282 reg |= PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN; 283 } else { 284 reg |= PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN; 285 netif_err(efx, link, efx->net_dev, 286 "appears to be plugged into a port" 287 " that is not 10GBASE-T capable. The PHY" 288 " supports 10GBASE-T ONLY, so no link can" 289 " be established\n"); 290 } 291 ef4_mdio_write(efx, MDIO_MMD_PMAPMD, 292 PMA_PMD_LED_OVERR_REG, reg); 293 pd->bad_lp_tries = bad_lp; 294 } 295} 296 297static bool sfx7101_link_ok(struct ef4_nic *efx) 298{ 299 return ef4_mdio_links_ok(efx, 300 MDIO_DEVS_PMAPMD | 301 MDIO_DEVS_PCS | 302 MDIO_DEVS_PHYXS); 303} 304 305static void tenxpress_ext_loopback(struct ef4_nic *efx) 306{ 307 ef4_mdio_set_flag(efx, MDIO_MMD_PHYXS, PHYXS_TEST1, 308 1 << LOOPBACK_NEAR_LBN, 309 efx->loopback_mode == LOOPBACK_PHYXS); 310} 311 312static void tenxpress_low_power(struct ef4_nic *efx) 313{ 314 ef4_mdio_set_mmds_lpower( 315 efx, !!(efx->phy_mode & PHY_MODE_LOW_POWER), 316 TENXPRESS_REQUIRED_DEVS); 317} 318 319static int tenxpress_phy_reconfigure(struct ef4_nic *efx) 320{ 321 struct tenxpress_phy_data *phy_data = efx->phy_data; 322 bool phy_mode_change, loop_reset; 323 324 if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) { 325 phy_data->phy_mode = efx->phy_mode; 326 return 0; 327 } 328 329 phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL && 330 phy_data->phy_mode != PHY_MODE_NORMAL); 331 loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, LOOPBACKS_EXTERNAL(efx)) || 332 LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY)); 333 334 if (loop_reset || phy_mode_change) { 335 tenxpress_special_reset(efx); 336 falcon_reset_xaui(efx); 337 } 338 339 tenxpress_low_power(efx); 340 ef4_mdio_transmit_disable(efx); 341 ef4_mdio_phy_reconfigure(efx); 342 tenxpress_ext_loopback(efx); 343 ef4_mdio_an_reconfigure(efx); 344 345 phy_data->loopback_mode = efx->loopback_mode; 346 phy_data->phy_mode = efx->phy_mode; 347 348 return 0; 349} 350 351/* Poll for link state changes */ 352static bool tenxpress_phy_poll(struct ef4_nic *efx) 353{ 354 struct ef4_link_state old_state = efx->link_state; 355 356 efx->link_state.up = sfx7101_link_ok(efx); 357 efx->link_state.speed = 10000; 358 efx->link_state.fd = true; 359 efx->link_state.fc = ef4_mdio_get_pause(efx); 360 361 sfx7101_check_bad_lp(efx, efx->link_state.up); 362 363 return !ef4_link_state_equal(&efx->link_state, &old_state); 364} 365 366static void sfx7101_phy_fini(struct ef4_nic *efx) 367{ 368 int reg; 369 370 /* Power down the LNPGA */ 371 reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN); 372 ef4_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); 373 374 /* Waiting here ensures that the board fini, which can turn 375 * off the power to the PHY, won't get run until the LNPGA 376 * powerdown has been given long enough to complete. */ 377 schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */ 378} 379 380static void tenxpress_phy_remove(struct ef4_nic *efx) 381{ 382 kfree(efx->phy_data); 383 efx->phy_data = NULL; 384} 385 386 387/* Override the RX, TX and link LEDs */ 388void tenxpress_set_id_led(struct ef4_nic *efx, enum ef4_led_mode mode) 389{ 390 int reg; 391 392 switch (mode) { 393 case EF4_LED_OFF: 394 reg = (PMA_PMD_LED_OFF << PMA_PMD_LED_TX_LBN) | 395 (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN) | 396 (PMA_PMD_LED_OFF << PMA_PMD_LED_LINK_LBN); 397 break; 398 case EF4_LED_ON: 399 reg = (PMA_PMD_LED_ON << PMA_PMD_LED_TX_LBN) | 400 (PMA_PMD_LED_ON << PMA_PMD_LED_RX_LBN) | 401 (PMA_PMD_LED_ON << PMA_PMD_LED_LINK_LBN); 402 break; 403 default: 404 reg = SFX7101_PMA_PMD_LED_DEFAULT; 405 break; 406 } 407 408 ef4_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, reg); 409} 410 411static const char *const sfx7101_test_names[] = { 412 "bist" 413}; 414 415static const char *sfx7101_test_name(struct ef4_nic *efx, unsigned int index) 416{ 417 if (index < ARRAY_SIZE(sfx7101_test_names)) 418 return sfx7101_test_names[index]; 419 return NULL; 420} 421 422static int 423sfx7101_run_tests(struct ef4_nic *efx, int *results, unsigned flags) 424{ 425 int rc; 426 427 if (!(flags & ETH_TEST_FL_OFFLINE)) 428 return 0; 429 430 /* BIST is automatically run after a special software reset */ 431 rc = tenxpress_special_reset(efx); 432 results[0] = rc ? -1 : 1; 433 434 ef4_mdio_an_reconfigure(efx); 435 436 return rc; 437} 438 439static void 440tenxpress_get_link_ksettings(struct ef4_nic *efx, 441 struct ethtool_link_ksettings *cmd) 442{ 443 u32 adv = 0, lpa = 0; 444 int reg; 445 446 reg = ef4_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL); 447 if (reg & MDIO_AN_10GBT_CTRL_ADV10G) 448 adv |= ADVERTISED_10000baseT_Full; 449 reg = ef4_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_STAT); 450 if (reg & MDIO_AN_10GBT_STAT_LP10G) 451 lpa |= ADVERTISED_10000baseT_Full; 452 453 mdio45_ethtool_ksettings_get_npage(&efx->mdio, cmd, adv, lpa); 454 455 /* In loopback, the PHY automatically brings up the correct interface, 456 * but doesn't advertise the correct speed. So override it */ 457 if (LOOPBACK_EXTERNAL(efx)) 458 cmd->base.speed = SPEED_10000; 459} 460 461static int 462tenxpress_set_link_ksettings(struct ef4_nic *efx, 463 const struct ethtool_link_ksettings *cmd) 464{ 465 if (!cmd->base.autoneg) 466 return -EINVAL; 467 468 return ef4_mdio_set_link_ksettings(efx, cmd); 469} 470 471static void sfx7101_set_npage_adv(struct ef4_nic *efx, u32 advertising) 472{ 473 ef4_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, 474 MDIO_AN_10GBT_CTRL_ADV10G, 475 advertising & ADVERTISED_10000baseT_Full); 476} 477 478const struct ef4_phy_operations falcon_sfx7101_phy_ops = { 479 .probe = tenxpress_phy_probe, 480 .init = tenxpress_phy_init, 481 .reconfigure = tenxpress_phy_reconfigure, 482 .poll = tenxpress_phy_poll, 483 .fini = sfx7101_phy_fini, 484 .remove = tenxpress_phy_remove, 485 .get_link_ksettings = tenxpress_get_link_ksettings, 486 .set_link_ksettings = tenxpress_set_link_ksettings, 487 .set_npage_adv = sfx7101_set_npage_adv, 488 .test_alive = ef4_mdio_test_alive, 489 .test_name = sfx7101_test_name, 490 .run_tests = sfx7101_run_tests, 491}; 492