1// SPDX-License-Identifier: GPL-2.0-only
2/* Copyright (C) 2023 Intel Corporation */
3
4#include "idpf.h"
5
6/**
7 * idpf_get_rxnfc - command to get RX flow classification rules
8 * @netdev: network interface device structure
9 * @cmd: ethtool rxnfc command
10 * @rule_locs: pointer to store rule locations
11 *
12 * Returns Success if the command is supported.
13 */
14static int idpf_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd,
15			  u32 __always_unused *rule_locs)
16{
17	struct idpf_vport *vport;
18
19	idpf_vport_ctrl_lock(netdev);
20	vport = idpf_netdev_to_vport(netdev);
21
22	switch (cmd->cmd) {
23	case ETHTOOL_GRXRINGS:
24		cmd->data = vport->num_rxq;
25		idpf_vport_ctrl_unlock(netdev);
26
27		return 0;
28	default:
29		break;
30	}
31
32	idpf_vport_ctrl_unlock(netdev);
33
34	return -EOPNOTSUPP;
35}
36
37/**
38 * idpf_get_rxfh_key_size - get the RSS hash key size
39 * @netdev: network interface device structure
40 *
41 * Returns the key size on success, error value on failure.
42 */
43static u32 idpf_get_rxfh_key_size(struct net_device *netdev)
44{
45	struct idpf_netdev_priv *np = netdev_priv(netdev);
46	struct idpf_vport_user_config_data *user_config;
47
48	if (!idpf_is_cap_ena_all(np->adapter, IDPF_RSS_CAPS, IDPF_CAP_RSS))
49		return -EOPNOTSUPP;
50
51	user_config = &np->adapter->vport_config[np->vport_idx]->user_config;
52
53	return user_config->rss_data.rss_key_size;
54}
55
56/**
57 * idpf_get_rxfh_indir_size - get the rx flow hash indirection table size
58 * @netdev: network interface device structure
59 *
60 * Returns the table size on success, error value on failure.
61 */
62static u32 idpf_get_rxfh_indir_size(struct net_device *netdev)
63{
64	struct idpf_netdev_priv *np = netdev_priv(netdev);
65	struct idpf_vport_user_config_data *user_config;
66
67	if (!idpf_is_cap_ena_all(np->adapter, IDPF_RSS_CAPS, IDPF_CAP_RSS))
68		return -EOPNOTSUPP;
69
70	user_config = &np->adapter->vport_config[np->vport_idx]->user_config;
71
72	return user_config->rss_data.rss_lut_size;
73}
74
75/**
76 * idpf_get_rxfh - get the rx flow hash indirection table
77 * @netdev: network interface device structure
78 * @rxfh: pointer to param struct (indir, key, hfunc)
79 *
80 * Reads the indirection table directly from the hardware. Always returns 0.
81 */
82static int idpf_get_rxfh(struct net_device *netdev,
83			 struct ethtool_rxfh_param *rxfh)
84{
85	struct idpf_netdev_priv *np = netdev_priv(netdev);
86	struct idpf_rss_data *rss_data;
87	struct idpf_adapter *adapter;
88	int err = 0;
89	u16 i;
90
91	idpf_vport_ctrl_lock(netdev);
92
93	adapter = np->adapter;
94
95	if (!idpf_is_cap_ena_all(adapter, IDPF_RSS_CAPS, IDPF_CAP_RSS)) {
96		err = -EOPNOTSUPP;
97		goto unlock_mutex;
98	}
99
100	rss_data = &adapter->vport_config[np->vport_idx]->user_config.rss_data;
101	if (np->state != __IDPF_VPORT_UP)
102		goto unlock_mutex;
103
104	rxfh->hfunc = ETH_RSS_HASH_TOP;
105
106	if (rxfh->key)
107		memcpy(rxfh->key, rss_data->rss_key, rss_data->rss_key_size);
108
109	if (rxfh->indir) {
110		for (i = 0; i < rss_data->rss_lut_size; i++)
111			rxfh->indir[i] = rss_data->rss_lut[i];
112	}
113
114unlock_mutex:
115	idpf_vport_ctrl_unlock(netdev);
116
117	return err;
118}
119
120/**
121 * idpf_set_rxfh - set the rx flow hash indirection table
122 * @netdev: network interface device structure
123 * @rxfh: pointer to param struct (indir, key, hfunc)
124 * @extack: extended ACK from the Netlink message
125 *
126 * Returns -EINVAL if the table specifies an invalid queue id, otherwise
127 * returns 0 after programming the table.
128 */
129static int idpf_set_rxfh(struct net_device *netdev,
130			 struct ethtool_rxfh_param *rxfh,
131			 struct netlink_ext_ack *extack)
132{
133	struct idpf_netdev_priv *np = netdev_priv(netdev);
134	struct idpf_rss_data *rss_data;
135	struct idpf_adapter *adapter;
136	struct idpf_vport *vport;
137	int err = 0;
138	u16 lut;
139
140	idpf_vport_ctrl_lock(netdev);
141	vport = idpf_netdev_to_vport(netdev);
142
143	adapter = vport->adapter;
144
145	if (!idpf_is_cap_ena_all(adapter, IDPF_RSS_CAPS, IDPF_CAP_RSS)) {
146		err = -EOPNOTSUPP;
147		goto unlock_mutex;
148	}
149
150	rss_data = &adapter->vport_config[vport->idx]->user_config.rss_data;
151	if (np->state != __IDPF_VPORT_UP)
152		goto unlock_mutex;
153
154	if (rxfh->hfunc != ETH_RSS_HASH_NO_CHANGE &&
155	    rxfh->hfunc != ETH_RSS_HASH_TOP) {
156		err = -EOPNOTSUPP;
157		goto unlock_mutex;
158	}
159
160	if (rxfh->key)
161		memcpy(rss_data->rss_key, rxfh->key, rss_data->rss_key_size);
162
163	if (rxfh->indir) {
164		for (lut = 0; lut < rss_data->rss_lut_size; lut++)
165			rss_data->rss_lut[lut] = rxfh->indir[lut];
166	}
167
168	err = idpf_config_rss(vport);
169
170unlock_mutex:
171	idpf_vport_ctrl_unlock(netdev);
172
173	return err;
174}
175
176/**
177 * idpf_get_channels: get the number of channels supported by the device
178 * @netdev: network interface device structure
179 * @ch: channel information structure
180 *
181 * Report maximum of TX and RX. Report one extra channel to match our MailBox
182 * Queue.
183 */
184static void idpf_get_channels(struct net_device *netdev,
185			      struct ethtool_channels *ch)
186{
187	struct idpf_netdev_priv *np = netdev_priv(netdev);
188	struct idpf_vport_config *vport_config;
189	u16 num_txq, num_rxq;
190	u16 combined;
191
192	vport_config = np->adapter->vport_config[np->vport_idx];
193
194	num_txq = vport_config->user_config.num_req_tx_qs;
195	num_rxq = vport_config->user_config.num_req_rx_qs;
196
197	combined = min(num_txq, num_rxq);
198
199	/* Report maximum channels */
200	ch->max_combined = min_t(u16, vport_config->max_q.max_txq,
201				 vport_config->max_q.max_rxq);
202	ch->max_rx = vport_config->max_q.max_rxq;
203	ch->max_tx = vport_config->max_q.max_txq;
204
205	ch->max_other = IDPF_MAX_MBXQ;
206	ch->other_count = IDPF_MAX_MBXQ;
207
208	ch->combined_count = combined;
209	ch->rx_count = num_rxq - combined;
210	ch->tx_count = num_txq - combined;
211}
212
213/**
214 * idpf_set_channels: set the new channel count
215 * @netdev: network interface device structure
216 * @ch: channel information structure
217 *
218 * Negotiate a new number of channels with CP. Returns 0 on success, negative
219 * on failure.
220 */
221static int idpf_set_channels(struct net_device *netdev,
222			     struct ethtool_channels *ch)
223{
224	struct idpf_vport_config *vport_config;
225	u16 combined, num_txq, num_rxq;
226	unsigned int num_req_tx_q;
227	unsigned int num_req_rx_q;
228	struct idpf_vport *vport;
229	struct device *dev;
230	int err = 0;
231	u16 idx;
232
233	idpf_vport_ctrl_lock(netdev);
234	vport = idpf_netdev_to_vport(netdev);
235
236	idx = vport->idx;
237	vport_config = vport->adapter->vport_config[idx];
238
239	num_txq = vport_config->user_config.num_req_tx_qs;
240	num_rxq = vport_config->user_config.num_req_rx_qs;
241
242	combined = min(num_txq, num_rxq);
243
244	/* these checks are for cases where user didn't specify a particular
245	 * value on cmd line but we get non-zero value anyway via
246	 * get_channels(); look at ethtool.c in ethtool repository (the user
247	 * space part), particularly, do_schannels() routine
248	 */
249	if (ch->combined_count == combined)
250		ch->combined_count = 0;
251	if (ch->combined_count && ch->rx_count == num_rxq - combined)
252		ch->rx_count = 0;
253	if (ch->combined_count && ch->tx_count == num_txq - combined)
254		ch->tx_count = 0;
255
256	num_req_tx_q = ch->combined_count + ch->tx_count;
257	num_req_rx_q = ch->combined_count + ch->rx_count;
258
259	dev = &vport->adapter->pdev->dev;
260	/* It's possible to specify number of queues that exceeds max.
261	 * Stack checks max combined_count and max [tx|rx]_count but not the
262	 * max combined_count + [tx|rx]_count. These checks should catch that.
263	 */
264	if (num_req_tx_q > vport_config->max_q.max_txq) {
265		dev_info(dev, "Maximum TX queues is %d\n",
266			 vport_config->max_q.max_txq);
267		err = -EINVAL;
268		goto unlock_mutex;
269	}
270	if (num_req_rx_q > vport_config->max_q.max_rxq) {
271		dev_info(dev, "Maximum RX queues is %d\n",
272			 vport_config->max_q.max_rxq);
273		err = -EINVAL;
274		goto unlock_mutex;
275	}
276
277	if (num_req_tx_q == num_txq && num_req_rx_q == num_rxq)
278		goto unlock_mutex;
279
280	vport_config->user_config.num_req_tx_qs = num_req_tx_q;
281	vport_config->user_config.num_req_rx_qs = num_req_rx_q;
282
283	err = idpf_initiate_soft_reset(vport, IDPF_SR_Q_CHANGE);
284	if (err) {
285		/* roll back queue change */
286		vport_config->user_config.num_req_tx_qs = num_txq;
287		vport_config->user_config.num_req_rx_qs = num_rxq;
288	}
289
290unlock_mutex:
291	idpf_vport_ctrl_unlock(netdev);
292
293	return err;
294}
295
296/**
297 * idpf_get_ringparam - Get ring parameters
298 * @netdev: network interface device structure
299 * @ring: ethtool ringparam structure
300 * @kring: unused
301 * @ext_ack: unused
302 *
303 * Returns current ring parameters. TX and RX rings are reported separately,
304 * but the number of rings is not reported.
305 */
306static void idpf_get_ringparam(struct net_device *netdev,
307			       struct ethtool_ringparam *ring,
308			       struct kernel_ethtool_ringparam *kring,
309			       struct netlink_ext_ack *ext_ack)
310{
311	struct idpf_vport *vport;
312
313	idpf_vport_ctrl_lock(netdev);
314	vport = idpf_netdev_to_vport(netdev);
315
316	ring->rx_max_pending = IDPF_MAX_RXQ_DESC;
317	ring->tx_max_pending = IDPF_MAX_TXQ_DESC;
318	ring->rx_pending = vport->rxq_desc_count;
319	ring->tx_pending = vport->txq_desc_count;
320
321	kring->tcp_data_split = idpf_vport_get_hsplit(vport);
322
323	idpf_vport_ctrl_unlock(netdev);
324}
325
326/**
327 * idpf_set_ringparam - Set ring parameters
328 * @netdev: network interface device structure
329 * @ring: ethtool ringparam structure
330 * @kring: unused
331 * @ext_ack: unused
332 *
333 * Sets ring parameters. TX and RX rings are controlled separately, but the
334 * number of rings is not specified, so all rings get the same settings.
335 */
336static int idpf_set_ringparam(struct net_device *netdev,
337			      struct ethtool_ringparam *ring,
338			      struct kernel_ethtool_ringparam *kring,
339			      struct netlink_ext_ack *ext_ack)
340{
341	struct idpf_vport_user_config_data *config_data;
342	u32 new_rx_count, new_tx_count;
343	struct idpf_vport *vport;
344	int i, err = 0;
345	u16 idx;
346
347	idpf_vport_ctrl_lock(netdev);
348	vport = idpf_netdev_to_vport(netdev);
349
350	idx = vport->idx;
351
352	if (ring->tx_pending < IDPF_MIN_TXQ_DESC) {
353		netdev_err(netdev, "Descriptors requested (Tx: %u) is less than min supported (%u)\n",
354			   ring->tx_pending,
355			   IDPF_MIN_TXQ_DESC);
356		err = -EINVAL;
357		goto unlock_mutex;
358	}
359
360	if (ring->rx_pending < IDPF_MIN_RXQ_DESC) {
361		netdev_err(netdev, "Descriptors requested (Rx: %u) is less than min supported (%u)\n",
362			   ring->rx_pending,
363			   IDPF_MIN_RXQ_DESC);
364		err = -EINVAL;
365		goto unlock_mutex;
366	}
367
368	new_rx_count = ALIGN(ring->rx_pending, IDPF_REQ_RXQ_DESC_MULTIPLE);
369	if (new_rx_count != ring->rx_pending)
370		netdev_info(netdev, "Requested Rx descriptor count rounded up to %u\n",
371			    new_rx_count);
372
373	new_tx_count = ALIGN(ring->tx_pending, IDPF_REQ_DESC_MULTIPLE);
374	if (new_tx_count != ring->tx_pending)
375		netdev_info(netdev, "Requested Tx descriptor count rounded up to %u\n",
376			    new_tx_count);
377
378	if (new_tx_count == vport->txq_desc_count &&
379	    new_rx_count == vport->rxq_desc_count)
380		goto unlock_mutex;
381
382	if (!idpf_vport_set_hsplit(vport, kring->tcp_data_split)) {
383		NL_SET_ERR_MSG_MOD(ext_ack,
384				   "setting TCP data split is not supported");
385		err = -EOPNOTSUPP;
386
387		goto unlock_mutex;
388	}
389
390	config_data = &vport->adapter->vport_config[idx]->user_config;
391	config_data->num_req_txq_desc = new_tx_count;
392	config_data->num_req_rxq_desc = new_rx_count;
393
394	/* Since we adjusted the RX completion queue count, the RX buffer queue
395	 * descriptor count needs to be adjusted as well
396	 */
397	for (i = 0; i < vport->num_bufqs_per_qgrp; i++)
398		vport->bufq_desc_count[i] =
399			IDPF_RX_BUFQ_DESC_COUNT(new_rx_count,
400						vport->num_bufqs_per_qgrp);
401
402	err = idpf_initiate_soft_reset(vport, IDPF_SR_Q_DESC_CHANGE);
403
404unlock_mutex:
405	idpf_vport_ctrl_unlock(netdev);
406
407	return err;
408}
409
410/**
411 * struct idpf_stats - definition for an ethtool statistic
412 * @stat_string: statistic name to display in ethtool -S output
413 * @sizeof_stat: the sizeof() the stat, must be no greater than sizeof(u64)
414 * @stat_offset: offsetof() the stat from a base pointer
415 *
416 * This structure defines a statistic to be added to the ethtool stats buffer.
417 * It defines a statistic as offset from a common base pointer. Stats should
418 * be defined in constant arrays using the IDPF_STAT macro, with every element
419 * of the array using the same _type for calculating the sizeof_stat and
420 * stat_offset.
421 *
422 * The @sizeof_stat is expected to be sizeof(u8), sizeof(u16), sizeof(u32) or
423 * sizeof(u64). Other sizes are not expected and will produce a WARN_ONCE from
424 * the idpf_add_ethtool_stat() helper function.
425 *
426 * The @stat_string is interpreted as a format string, allowing formatted
427 * values to be inserted while looping over multiple structures for a given
428 * statistics array. Thus, every statistic string in an array should have the
429 * same type and number of format specifiers, to be formatted by variadic
430 * arguments to the idpf_add_stat_string() helper function.
431 */
432struct idpf_stats {
433	char stat_string[ETH_GSTRING_LEN];
434	int sizeof_stat;
435	int stat_offset;
436};
437
438/* Helper macro to define an idpf_stat structure with proper size and type.
439 * Use this when defining constant statistics arrays. Note that @_type expects
440 * only a type name and is used multiple times.
441 */
442#define IDPF_STAT(_type, _name, _stat) { \
443	.stat_string = _name, \
444	.sizeof_stat = sizeof_field(_type, _stat), \
445	.stat_offset = offsetof(_type, _stat) \
446}
447
448/* Helper macro for defining some statistics related to queues */
449#define IDPF_QUEUE_STAT(_name, _stat) \
450	IDPF_STAT(struct idpf_queue, _name, _stat)
451
452/* Stats associated with a Tx queue */
453static const struct idpf_stats idpf_gstrings_tx_queue_stats[] = {
454	IDPF_QUEUE_STAT("pkts", q_stats.tx.packets),
455	IDPF_QUEUE_STAT("bytes", q_stats.tx.bytes),
456	IDPF_QUEUE_STAT("lso_pkts", q_stats.tx.lso_pkts),
457};
458
459/* Stats associated with an Rx queue */
460static const struct idpf_stats idpf_gstrings_rx_queue_stats[] = {
461	IDPF_QUEUE_STAT("pkts", q_stats.rx.packets),
462	IDPF_QUEUE_STAT("bytes", q_stats.rx.bytes),
463	IDPF_QUEUE_STAT("rx_gro_hw_pkts", q_stats.rx.rsc_pkts),
464};
465
466#define IDPF_TX_QUEUE_STATS_LEN		ARRAY_SIZE(idpf_gstrings_tx_queue_stats)
467#define IDPF_RX_QUEUE_STATS_LEN		ARRAY_SIZE(idpf_gstrings_rx_queue_stats)
468
469#define IDPF_PORT_STAT(_name, _stat) \
470	IDPF_STAT(struct idpf_vport,  _name, _stat)
471
472static const struct idpf_stats idpf_gstrings_port_stats[] = {
473	IDPF_PORT_STAT("rx-csum_errors", port_stats.rx_hw_csum_err),
474	IDPF_PORT_STAT("rx-hsplit", port_stats.rx_hsplit),
475	IDPF_PORT_STAT("rx-hsplit_hbo", port_stats.rx_hsplit_hbo),
476	IDPF_PORT_STAT("rx-bad_descs", port_stats.rx_bad_descs),
477	IDPF_PORT_STAT("tx-skb_drops", port_stats.tx_drops),
478	IDPF_PORT_STAT("tx-dma_map_errs", port_stats.tx_dma_map_errs),
479	IDPF_PORT_STAT("tx-linearized_pkts", port_stats.tx_linearize),
480	IDPF_PORT_STAT("tx-busy_events", port_stats.tx_busy),
481	IDPF_PORT_STAT("rx-unicast_pkts", port_stats.vport_stats.rx_unicast),
482	IDPF_PORT_STAT("rx-multicast_pkts", port_stats.vport_stats.rx_multicast),
483	IDPF_PORT_STAT("rx-broadcast_pkts", port_stats.vport_stats.rx_broadcast),
484	IDPF_PORT_STAT("rx-unknown_protocol", port_stats.vport_stats.rx_unknown_protocol),
485	IDPF_PORT_STAT("tx-unicast_pkts", port_stats.vport_stats.tx_unicast),
486	IDPF_PORT_STAT("tx-multicast_pkts", port_stats.vport_stats.tx_multicast),
487	IDPF_PORT_STAT("tx-broadcast_pkts", port_stats.vport_stats.tx_broadcast),
488};
489
490#define IDPF_PORT_STATS_LEN ARRAY_SIZE(idpf_gstrings_port_stats)
491
492/**
493 * __idpf_add_qstat_strings - copy stat strings into ethtool buffer
494 * @p: ethtool supplied buffer
495 * @stats: stat definitions array
496 * @size: size of the stats array
497 * @type: stat type
498 * @idx: stat index
499 *
500 * Format and copy the strings described by stats into the buffer pointed at
501 * by p.
502 */
503static void __idpf_add_qstat_strings(u8 **p, const struct idpf_stats *stats,
504				     const unsigned int size, const char *type,
505				     unsigned int idx)
506{
507	unsigned int i;
508
509	for (i = 0; i < size; i++)
510		ethtool_sprintf(p, "%s_q-%u_%s",
511				type, idx, stats[i].stat_string);
512}
513
514/**
515 * idpf_add_qstat_strings - Copy queue stat strings into ethtool buffer
516 * @p: ethtool supplied buffer
517 * @stats: stat definitions array
518 * @type: stat type
519 * @idx: stat idx
520 *
521 * Format and copy the strings described by the const static stats value into
522 * the buffer pointed at by p.
523 *
524 * The parameter @stats is evaluated twice, so parameters with side effects
525 * should be avoided. Additionally, stats must be an array such that
526 * ARRAY_SIZE can be called on it.
527 */
528#define idpf_add_qstat_strings(p, stats, type, idx) \
529	__idpf_add_qstat_strings(p, stats, ARRAY_SIZE(stats), type, idx)
530
531/**
532 * idpf_add_stat_strings - Copy port stat strings into ethtool buffer
533 * @p: ethtool buffer
534 * @stats: struct to copy from
535 * @size: size of stats array to copy from
536 */
537static void idpf_add_stat_strings(u8 **p, const struct idpf_stats *stats,
538				  const unsigned int size)
539{
540	unsigned int i;
541
542	for (i = 0; i < size; i++)
543		ethtool_puts(p, stats[i].stat_string);
544}
545
546/**
547 * idpf_get_stat_strings - Get stat strings
548 * @netdev: network interface device structure
549 * @data: buffer for string data
550 *
551 * Builds the statistics string table
552 */
553static void idpf_get_stat_strings(struct net_device *netdev, u8 *data)
554{
555	struct idpf_netdev_priv *np = netdev_priv(netdev);
556	struct idpf_vport_config *vport_config;
557	unsigned int i;
558
559	idpf_add_stat_strings(&data, idpf_gstrings_port_stats,
560			      IDPF_PORT_STATS_LEN);
561
562	vport_config = np->adapter->vport_config[np->vport_idx];
563	/* It's critical that we always report a constant number of strings and
564	 * that the strings are reported in the same order regardless of how
565	 * many queues are actually in use.
566	 */
567	for (i = 0; i < vport_config->max_q.max_txq; i++)
568		idpf_add_qstat_strings(&data, idpf_gstrings_tx_queue_stats,
569				       "tx", i);
570
571	for (i = 0; i < vport_config->max_q.max_rxq; i++)
572		idpf_add_qstat_strings(&data, idpf_gstrings_rx_queue_stats,
573				       "rx", i);
574
575	page_pool_ethtool_stats_get_strings(data);
576}
577
578/**
579 * idpf_get_strings - Get string set
580 * @netdev: network interface device structure
581 * @sset: id of string set
582 * @data: buffer for string data
583 *
584 * Builds string tables for various string sets
585 */
586static void idpf_get_strings(struct net_device *netdev, u32 sset, u8 *data)
587{
588	switch (sset) {
589	case ETH_SS_STATS:
590		idpf_get_stat_strings(netdev, data);
591		break;
592	default:
593		break;
594	}
595}
596
597/**
598 * idpf_get_sset_count - Get length of string set
599 * @netdev: network interface device structure
600 * @sset: id of string set
601 *
602 * Reports size of various string tables.
603 */
604static int idpf_get_sset_count(struct net_device *netdev, int sset)
605{
606	struct idpf_netdev_priv *np = netdev_priv(netdev);
607	struct idpf_vport_config *vport_config;
608	u16 max_txq, max_rxq;
609	unsigned int size;
610
611	if (sset != ETH_SS_STATS)
612		return -EINVAL;
613
614	vport_config = np->adapter->vport_config[np->vport_idx];
615	/* This size reported back here *must* be constant throughout the
616	 * lifecycle of the netdevice, i.e. we must report the maximum length
617	 * even for queues that don't technically exist.  This is due to the
618	 * fact that this userspace API uses three separate ioctl calls to get
619	 * stats data but has no way to communicate back to userspace when that
620	 * size has changed, which can typically happen as a result of changing
621	 * number of queues. If the number/order of stats change in the middle
622	 * of this call chain it will lead to userspace crashing/accessing bad
623	 * data through buffer under/overflow.
624	 */
625	max_txq = vport_config->max_q.max_txq;
626	max_rxq = vport_config->max_q.max_rxq;
627
628	size = IDPF_PORT_STATS_LEN + (IDPF_TX_QUEUE_STATS_LEN * max_txq) +
629	       (IDPF_RX_QUEUE_STATS_LEN * max_rxq);
630	size += page_pool_ethtool_stats_get_count();
631
632	return size;
633}
634
635/**
636 * idpf_add_one_ethtool_stat - copy the stat into the supplied buffer
637 * @data: location to store the stat value
638 * @pstat: old stat pointer to copy from
639 * @stat: the stat definition
640 *
641 * Copies the stat data defined by the pointer and stat structure pair into
642 * the memory supplied as data. If the pointer is null, data will be zero'd.
643 */
644static void idpf_add_one_ethtool_stat(u64 *data, void *pstat,
645				      const struct idpf_stats *stat)
646{
647	char *p;
648
649	if (!pstat) {
650		/* Ensure that the ethtool data buffer is zero'd for any stats
651		 * which don't have a valid pointer.
652		 */
653		*data = 0;
654		return;
655	}
656
657	p = (char *)pstat + stat->stat_offset;
658	switch (stat->sizeof_stat) {
659	case sizeof(u64):
660		*data = *((u64 *)p);
661		break;
662	case sizeof(u32):
663		*data = *((u32 *)p);
664		break;
665	case sizeof(u16):
666		*data = *((u16 *)p);
667		break;
668	case sizeof(u8):
669		*data = *((u8 *)p);
670		break;
671	default:
672		WARN_ONCE(1, "unexpected stat size for %s",
673			  stat->stat_string);
674		*data = 0;
675	}
676}
677
678/**
679 * idpf_add_queue_stats - copy queue statistics into supplied buffer
680 * @data: ethtool stats buffer
681 * @q: the queue to copy
682 *
683 * Queue statistics must be copied while protected by u64_stats_fetch_begin,
684 * so we can't directly use idpf_add_ethtool_stats. Assumes that queue stats
685 * are defined in idpf_gstrings_queue_stats. If the queue pointer is null,
686 * zero out the queue stat values and update the data pointer. Otherwise
687 * safely copy the stats from the queue into the supplied buffer and update
688 * the data pointer when finished.
689 *
690 * This function expects to be called while under rcu_read_lock().
691 */
692static void idpf_add_queue_stats(u64 **data, struct idpf_queue *q)
693{
694	const struct idpf_stats *stats;
695	unsigned int start;
696	unsigned int size;
697	unsigned int i;
698
699	if (q->q_type == VIRTCHNL2_QUEUE_TYPE_RX) {
700		size = IDPF_RX_QUEUE_STATS_LEN;
701		stats = idpf_gstrings_rx_queue_stats;
702	} else {
703		size = IDPF_TX_QUEUE_STATS_LEN;
704		stats = idpf_gstrings_tx_queue_stats;
705	}
706
707	/* To avoid invalid statistics values, ensure that we keep retrying
708	 * the copy until we get a consistent value according to
709	 * u64_stats_fetch_retry.
710	 */
711	do {
712		start = u64_stats_fetch_begin(&q->stats_sync);
713		for (i = 0; i < size; i++)
714			idpf_add_one_ethtool_stat(&(*data)[i], q, &stats[i]);
715	} while (u64_stats_fetch_retry(&q->stats_sync, start));
716
717	/* Once we successfully copy the stats in, update the data pointer */
718	*data += size;
719}
720
721/**
722 * idpf_add_empty_queue_stats - Add stats for a non-existent queue
723 * @data: pointer to data buffer
724 * @qtype: type of data queue
725 *
726 * We must report a constant length of stats back to userspace regardless of
727 * how many queues are actually in use because stats collection happens over
728 * three separate ioctls and there's no way to notify userspace the size
729 * changed between those calls. This adds empty to data to the stats since we
730 * don't have a real queue to refer to for this stats slot.
731 */
732static void idpf_add_empty_queue_stats(u64 **data, u16 qtype)
733{
734	unsigned int i;
735	int stats_len;
736
737	if (qtype == VIRTCHNL2_QUEUE_TYPE_RX)
738		stats_len = IDPF_RX_QUEUE_STATS_LEN;
739	else
740		stats_len = IDPF_TX_QUEUE_STATS_LEN;
741
742	for (i = 0; i < stats_len; i++)
743		(*data)[i] = 0;
744	*data += stats_len;
745}
746
747/**
748 * idpf_add_port_stats - Copy port stats into ethtool buffer
749 * @vport: virtual port struct
750 * @data: ethtool buffer to copy into
751 */
752static void idpf_add_port_stats(struct idpf_vport *vport, u64 **data)
753{
754	unsigned int size = IDPF_PORT_STATS_LEN;
755	unsigned int start;
756	unsigned int i;
757
758	do {
759		start = u64_stats_fetch_begin(&vport->port_stats.stats_sync);
760		for (i = 0; i < size; i++)
761			idpf_add_one_ethtool_stat(&(*data)[i], vport,
762						  &idpf_gstrings_port_stats[i]);
763	} while (u64_stats_fetch_retry(&vport->port_stats.stats_sync, start));
764
765	*data += size;
766}
767
768/**
769 * idpf_collect_queue_stats - accumulate various per queue stats
770 * into port level stats
771 * @vport: pointer to vport struct
772 **/
773static void idpf_collect_queue_stats(struct idpf_vport *vport)
774{
775	struct idpf_port_stats *pstats = &vport->port_stats;
776	int i, j;
777
778	/* zero out port stats since they're actually tracked in per
779	 * queue stats; this is only for reporting
780	 */
781	u64_stats_update_begin(&pstats->stats_sync);
782	u64_stats_set(&pstats->rx_hw_csum_err, 0);
783	u64_stats_set(&pstats->rx_hsplit, 0);
784	u64_stats_set(&pstats->rx_hsplit_hbo, 0);
785	u64_stats_set(&pstats->rx_bad_descs, 0);
786	u64_stats_set(&pstats->tx_linearize, 0);
787	u64_stats_set(&pstats->tx_busy, 0);
788	u64_stats_set(&pstats->tx_drops, 0);
789	u64_stats_set(&pstats->tx_dma_map_errs, 0);
790	u64_stats_update_end(&pstats->stats_sync);
791
792	for (i = 0; i < vport->num_rxq_grp; i++) {
793		struct idpf_rxq_group *rxq_grp = &vport->rxq_grps[i];
794		u16 num_rxq;
795
796		if (idpf_is_queue_model_split(vport->rxq_model))
797			num_rxq = rxq_grp->splitq.num_rxq_sets;
798		else
799			num_rxq = rxq_grp->singleq.num_rxq;
800
801		for (j = 0; j < num_rxq; j++) {
802			u64 hw_csum_err, hsplit, hsplit_hbo, bad_descs;
803			struct idpf_rx_queue_stats *stats;
804			struct idpf_queue *rxq;
805			unsigned int start;
806
807			if (idpf_is_queue_model_split(vport->rxq_model))
808				rxq = &rxq_grp->splitq.rxq_sets[j]->rxq;
809			else
810				rxq = rxq_grp->singleq.rxqs[j];
811
812			if (!rxq)
813				continue;
814
815			do {
816				start = u64_stats_fetch_begin(&rxq->stats_sync);
817
818				stats = &rxq->q_stats.rx;
819				hw_csum_err = u64_stats_read(&stats->hw_csum_err);
820				hsplit = u64_stats_read(&stats->hsplit_pkts);
821				hsplit_hbo = u64_stats_read(&stats->hsplit_buf_ovf);
822				bad_descs = u64_stats_read(&stats->bad_descs);
823			} while (u64_stats_fetch_retry(&rxq->stats_sync, start));
824
825			u64_stats_update_begin(&pstats->stats_sync);
826			u64_stats_add(&pstats->rx_hw_csum_err, hw_csum_err);
827			u64_stats_add(&pstats->rx_hsplit, hsplit);
828			u64_stats_add(&pstats->rx_hsplit_hbo, hsplit_hbo);
829			u64_stats_add(&pstats->rx_bad_descs, bad_descs);
830			u64_stats_update_end(&pstats->stats_sync);
831		}
832	}
833
834	for (i = 0; i < vport->num_txq_grp; i++) {
835		struct idpf_txq_group *txq_grp = &vport->txq_grps[i];
836
837		for (j = 0; j < txq_grp->num_txq; j++) {
838			u64 linearize, qbusy, skb_drops, dma_map_errs;
839			struct idpf_queue *txq = txq_grp->txqs[j];
840			struct idpf_tx_queue_stats *stats;
841			unsigned int start;
842
843			if (!txq)
844				continue;
845
846			do {
847				start = u64_stats_fetch_begin(&txq->stats_sync);
848
849				stats = &txq->q_stats.tx;
850				linearize = u64_stats_read(&stats->linearize);
851				qbusy = u64_stats_read(&stats->q_busy);
852				skb_drops = u64_stats_read(&stats->skb_drops);
853				dma_map_errs = u64_stats_read(&stats->dma_map_errs);
854			} while (u64_stats_fetch_retry(&txq->stats_sync, start));
855
856			u64_stats_update_begin(&pstats->stats_sync);
857			u64_stats_add(&pstats->tx_linearize, linearize);
858			u64_stats_add(&pstats->tx_busy, qbusy);
859			u64_stats_add(&pstats->tx_drops, skb_drops);
860			u64_stats_add(&pstats->tx_dma_map_errs, dma_map_errs);
861			u64_stats_update_end(&pstats->stats_sync);
862		}
863	}
864}
865
866/**
867 * idpf_get_ethtool_stats - report device statistics
868 * @netdev: network interface device structure
869 * @stats: ethtool statistics structure
870 * @data: pointer to data buffer
871 *
872 * All statistics are added to the data buffer as an array of u64.
873 */
874static void idpf_get_ethtool_stats(struct net_device *netdev,
875				   struct ethtool_stats __always_unused *stats,
876				   u64 *data)
877{
878	struct idpf_netdev_priv *np = netdev_priv(netdev);
879	struct idpf_vport_config *vport_config;
880	struct page_pool_stats pp_stats = { };
881	struct idpf_vport *vport;
882	unsigned int total = 0;
883	unsigned int i, j;
884	bool is_splitq;
885	u16 qtype;
886
887	idpf_vport_ctrl_lock(netdev);
888	vport = idpf_netdev_to_vport(netdev);
889
890	if (np->state != __IDPF_VPORT_UP) {
891		idpf_vport_ctrl_unlock(netdev);
892
893		return;
894	}
895
896	rcu_read_lock();
897
898	idpf_collect_queue_stats(vport);
899	idpf_add_port_stats(vport, &data);
900
901	for (i = 0; i < vport->num_txq_grp; i++) {
902		struct idpf_txq_group *txq_grp = &vport->txq_grps[i];
903
904		qtype = VIRTCHNL2_QUEUE_TYPE_TX;
905
906		for (j = 0; j < txq_grp->num_txq; j++, total++) {
907			struct idpf_queue *txq = txq_grp->txqs[j];
908
909			if (!txq)
910				idpf_add_empty_queue_stats(&data, qtype);
911			else
912				idpf_add_queue_stats(&data, txq);
913		}
914	}
915
916	vport_config = vport->adapter->vport_config[vport->idx];
917	/* It is critical we provide a constant number of stats back to
918	 * userspace regardless of how many queues are actually in use because
919	 * there is no way to inform userspace the size has changed between
920	 * ioctl calls. This will fill in any missing stats with zero.
921	 */
922	for (; total < vport_config->max_q.max_txq; total++)
923		idpf_add_empty_queue_stats(&data, VIRTCHNL2_QUEUE_TYPE_TX);
924	total = 0;
925
926	is_splitq = idpf_is_queue_model_split(vport->rxq_model);
927
928	for (i = 0; i < vport->num_rxq_grp; i++) {
929		struct idpf_rxq_group *rxq_grp = &vport->rxq_grps[i];
930		u16 num_rxq;
931
932		qtype = VIRTCHNL2_QUEUE_TYPE_RX;
933
934		if (is_splitq)
935			num_rxq = rxq_grp->splitq.num_rxq_sets;
936		else
937			num_rxq = rxq_grp->singleq.num_rxq;
938
939		for (j = 0; j < num_rxq; j++, total++) {
940			struct idpf_queue *rxq;
941
942			if (is_splitq)
943				rxq = &rxq_grp->splitq.rxq_sets[j]->rxq;
944			else
945				rxq = rxq_grp->singleq.rxqs[j];
946			if (!rxq)
947				idpf_add_empty_queue_stats(&data, qtype);
948			else
949				idpf_add_queue_stats(&data, rxq);
950
951			/* In splitq mode, don't get page pool stats here since
952			 * the pools are attached to the buffer queues
953			 */
954			if (is_splitq)
955				continue;
956
957			if (rxq)
958				page_pool_get_stats(rxq->pp, &pp_stats);
959		}
960	}
961
962	for (i = 0; i < vport->num_rxq_grp; i++) {
963		for (j = 0; j < vport->num_bufqs_per_qgrp; j++) {
964			struct idpf_queue *rxbufq =
965				&vport->rxq_grps[i].splitq.bufq_sets[j].bufq;
966
967			page_pool_get_stats(rxbufq->pp, &pp_stats);
968		}
969	}
970
971	for (; total < vport_config->max_q.max_rxq; total++)
972		idpf_add_empty_queue_stats(&data, VIRTCHNL2_QUEUE_TYPE_RX);
973
974	page_pool_ethtool_stats_get(data, &pp_stats);
975
976	rcu_read_unlock();
977
978	idpf_vport_ctrl_unlock(netdev);
979}
980
981/**
982 * idpf_find_rxq - find rxq from q index
983 * @vport: virtual port associated to queue
984 * @q_num: q index used to find queue
985 *
986 * returns pointer to rx queue
987 */
988static struct idpf_queue *idpf_find_rxq(struct idpf_vport *vport, int q_num)
989{
990	int q_grp, q_idx;
991
992	if (!idpf_is_queue_model_split(vport->rxq_model))
993		return vport->rxq_grps->singleq.rxqs[q_num];
994
995	q_grp = q_num / IDPF_DFLT_SPLITQ_RXQ_PER_GROUP;
996	q_idx = q_num % IDPF_DFLT_SPLITQ_RXQ_PER_GROUP;
997
998	return &vport->rxq_grps[q_grp].splitq.rxq_sets[q_idx]->rxq;
999}
1000
1001/**
1002 * idpf_find_txq - find txq from q index
1003 * @vport: virtual port associated to queue
1004 * @q_num: q index used to find queue
1005 *
1006 * returns pointer to tx queue
1007 */
1008static struct idpf_queue *idpf_find_txq(struct idpf_vport *vport, int q_num)
1009{
1010	int q_grp;
1011
1012	if (!idpf_is_queue_model_split(vport->txq_model))
1013		return vport->txqs[q_num];
1014
1015	q_grp = q_num / IDPF_DFLT_SPLITQ_TXQ_PER_GROUP;
1016
1017	return vport->txq_grps[q_grp].complq;
1018}
1019
1020/**
1021 * __idpf_get_q_coalesce - get ITR values for specific queue
1022 * @ec: ethtool structure to fill with driver's coalesce settings
1023 * @q: quuee of Rx or Tx
1024 */
1025static void __idpf_get_q_coalesce(struct ethtool_coalesce *ec,
1026				  struct idpf_queue *q)
1027{
1028	if (q->q_type == VIRTCHNL2_QUEUE_TYPE_RX) {
1029		ec->use_adaptive_rx_coalesce =
1030				IDPF_ITR_IS_DYNAMIC(q->q_vector->rx_intr_mode);
1031		ec->rx_coalesce_usecs = q->q_vector->rx_itr_value;
1032	} else {
1033		ec->use_adaptive_tx_coalesce =
1034				IDPF_ITR_IS_DYNAMIC(q->q_vector->tx_intr_mode);
1035		ec->tx_coalesce_usecs = q->q_vector->tx_itr_value;
1036	}
1037}
1038
1039/**
1040 * idpf_get_q_coalesce - get ITR values for specific queue
1041 * @netdev: pointer to the netdev associated with this query
1042 * @ec: coalesce settings to program the device with
1043 * @q_num: update ITR/INTRL (coalesce) settings for this queue number/index
1044 *
1045 * Return 0 on success, and negative on failure
1046 */
1047static int idpf_get_q_coalesce(struct net_device *netdev,
1048			       struct ethtool_coalesce *ec,
1049			       u32 q_num)
1050{
1051	struct idpf_netdev_priv *np = netdev_priv(netdev);
1052	struct idpf_vport *vport;
1053	int err = 0;
1054
1055	idpf_vport_ctrl_lock(netdev);
1056	vport = idpf_netdev_to_vport(netdev);
1057
1058	if (np->state != __IDPF_VPORT_UP)
1059		goto unlock_mutex;
1060
1061	if (q_num >= vport->num_rxq && q_num >= vport->num_txq) {
1062		err = -EINVAL;
1063		goto unlock_mutex;
1064	}
1065
1066	if (q_num < vport->num_rxq)
1067		__idpf_get_q_coalesce(ec, idpf_find_rxq(vport, q_num));
1068
1069	if (q_num < vport->num_txq)
1070		__idpf_get_q_coalesce(ec, idpf_find_txq(vport, q_num));
1071
1072unlock_mutex:
1073	idpf_vport_ctrl_unlock(netdev);
1074
1075	return err;
1076}
1077
1078/**
1079 * idpf_get_coalesce - get ITR values as requested by user
1080 * @netdev: pointer to the netdev associated with this query
1081 * @ec: coalesce settings to be filled
1082 * @kec: unused
1083 * @extack: unused
1084 *
1085 * Return 0 on success, and negative on failure
1086 */
1087static int idpf_get_coalesce(struct net_device *netdev,
1088			     struct ethtool_coalesce *ec,
1089			     struct kernel_ethtool_coalesce *kec,
1090			     struct netlink_ext_ack *extack)
1091{
1092	/* Return coalesce based on queue number zero */
1093	return idpf_get_q_coalesce(netdev, ec, 0);
1094}
1095
1096/**
1097 * idpf_get_per_q_coalesce - get ITR values as requested by user
1098 * @netdev: pointer to the netdev associated with this query
1099 * @q_num: queue for which the itr values has to retrieved
1100 * @ec: coalesce settings to be filled
1101 *
1102 * Return 0 on success, and negative on failure
1103 */
1104
1105static int idpf_get_per_q_coalesce(struct net_device *netdev, u32 q_num,
1106				   struct ethtool_coalesce *ec)
1107{
1108	return idpf_get_q_coalesce(netdev, ec, q_num);
1109}
1110
1111/**
1112 * __idpf_set_q_coalesce - set ITR values for specific queue
1113 * @ec: ethtool structure from user to update ITR settings
1114 * @q: queue for which itr values has to be set
1115 * @is_rxq: is queue type rx
1116 *
1117 * Returns 0 on success, negative otherwise.
1118 */
1119static int __idpf_set_q_coalesce(struct ethtool_coalesce *ec,
1120				 struct idpf_queue *q, bool is_rxq)
1121{
1122	u32 use_adaptive_coalesce, coalesce_usecs;
1123	struct idpf_q_vector *qv = q->q_vector;
1124	bool is_dim_ena = false;
1125	u16 itr_val;
1126
1127	if (is_rxq) {
1128		is_dim_ena = IDPF_ITR_IS_DYNAMIC(qv->rx_intr_mode);
1129		use_adaptive_coalesce = ec->use_adaptive_rx_coalesce;
1130		coalesce_usecs = ec->rx_coalesce_usecs;
1131		itr_val = qv->rx_itr_value;
1132	} else {
1133		is_dim_ena = IDPF_ITR_IS_DYNAMIC(qv->tx_intr_mode);
1134		use_adaptive_coalesce = ec->use_adaptive_tx_coalesce;
1135		coalesce_usecs = ec->tx_coalesce_usecs;
1136		itr_val = qv->tx_itr_value;
1137	}
1138	if (coalesce_usecs != itr_val && use_adaptive_coalesce) {
1139		netdev_err(q->vport->netdev, "Cannot set coalesce usecs if adaptive enabled\n");
1140
1141		return -EINVAL;
1142	}
1143
1144	if (is_dim_ena && use_adaptive_coalesce)
1145		return 0;
1146
1147	if (coalesce_usecs > IDPF_ITR_MAX) {
1148		netdev_err(q->vport->netdev,
1149			   "Invalid value, %d-usecs range is 0-%d\n",
1150			   coalesce_usecs, IDPF_ITR_MAX);
1151
1152		return -EINVAL;
1153	}
1154
1155	if (coalesce_usecs % 2) {
1156		coalesce_usecs--;
1157		netdev_info(q->vport->netdev,
1158			    "HW only supports even ITR values, ITR rounded to %d\n",
1159			    coalesce_usecs);
1160	}
1161
1162	if (is_rxq) {
1163		qv->rx_itr_value = coalesce_usecs;
1164		if (use_adaptive_coalesce) {
1165			qv->rx_intr_mode = IDPF_ITR_DYNAMIC;
1166		} else {
1167			qv->rx_intr_mode = !IDPF_ITR_DYNAMIC;
1168			idpf_vport_intr_write_itr(qv, qv->rx_itr_value,
1169						  false);
1170		}
1171	} else {
1172		qv->tx_itr_value = coalesce_usecs;
1173		if (use_adaptive_coalesce) {
1174			qv->tx_intr_mode = IDPF_ITR_DYNAMIC;
1175		} else {
1176			qv->tx_intr_mode = !IDPF_ITR_DYNAMIC;
1177			idpf_vport_intr_write_itr(qv, qv->tx_itr_value, true);
1178		}
1179	}
1180
1181	/* Update of static/dynamic itr will be taken care when interrupt is
1182	 * fired
1183	 */
1184	return 0;
1185}
1186
1187/**
1188 * idpf_set_q_coalesce - set ITR values for specific queue
1189 * @vport: vport associated to the queue that need updating
1190 * @ec: coalesce settings to program the device with
1191 * @q_num: update ITR/INTRL (coalesce) settings for this queue number/index
1192 * @is_rxq: is queue type rx
1193 *
1194 * Return 0 on success, and negative on failure
1195 */
1196static int idpf_set_q_coalesce(struct idpf_vport *vport,
1197			       struct ethtool_coalesce *ec,
1198			       int q_num, bool is_rxq)
1199{
1200	struct idpf_queue *q;
1201
1202	q = is_rxq ? idpf_find_rxq(vport, q_num) : idpf_find_txq(vport, q_num);
1203
1204	if (q && __idpf_set_q_coalesce(ec, q, is_rxq))
1205		return -EINVAL;
1206
1207	return 0;
1208}
1209
1210/**
1211 * idpf_set_coalesce - set ITR values as requested by user
1212 * @netdev: pointer to the netdev associated with this query
1213 * @ec: coalesce settings to program the device with
1214 * @kec: unused
1215 * @extack: unused
1216 *
1217 * Return 0 on success, and negative on failure
1218 */
1219static int idpf_set_coalesce(struct net_device *netdev,
1220			     struct ethtool_coalesce *ec,
1221			     struct kernel_ethtool_coalesce *kec,
1222			     struct netlink_ext_ack *extack)
1223{
1224	struct idpf_netdev_priv *np = netdev_priv(netdev);
1225	struct idpf_vport *vport;
1226	int i, err = 0;
1227
1228	idpf_vport_ctrl_lock(netdev);
1229	vport = idpf_netdev_to_vport(netdev);
1230
1231	if (np->state != __IDPF_VPORT_UP)
1232		goto unlock_mutex;
1233
1234	for (i = 0; i < vport->num_txq; i++) {
1235		err = idpf_set_q_coalesce(vport, ec, i, false);
1236		if (err)
1237			goto unlock_mutex;
1238	}
1239
1240	for (i = 0; i < vport->num_rxq; i++) {
1241		err = idpf_set_q_coalesce(vport, ec, i, true);
1242		if (err)
1243			goto unlock_mutex;
1244	}
1245
1246unlock_mutex:
1247	idpf_vport_ctrl_unlock(netdev);
1248
1249	return err;
1250}
1251
1252/**
1253 * idpf_set_per_q_coalesce - set ITR values as requested by user
1254 * @netdev: pointer to the netdev associated with this query
1255 * @q_num: queue for which the itr values has to be set
1256 * @ec: coalesce settings to program the device with
1257 *
1258 * Return 0 on success, and negative on failure
1259 */
1260static int idpf_set_per_q_coalesce(struct net_device *netdev, u32 q_num,
1261				   struct ethtool_coalesce *ec)
1262{
1263	struct idpf_vport *vport;
1264	int err;
1265
1266	idpf_vport_ctrl_lock(netdev);
1267	vport = idpf_netdev_to_vport(netdev);
1268
1269	err = idpf_set_q_coalesce(vport, ec, q_num, false);
1270	if (err) {
1271		idpf_vport_ctrl_unlock(netdev);
1272
1273		return err;
1274	}
1275
1276	err = idpf_set_q_coalesce(vport, ec, q_num, true);
1277
1278	idpf_vport_ctrl_unlock(netdev);
1279
1280	return err;
1281}
1282
1283/**
1284 * idpf_get_msglevel - Get debug message level
1285 * @netdev: network interface device structure
1286 *
1287 * Returns current debug message level.
1288 */
1289static u32 idpf_get_msglevel(struct net_device *netdev)
1290{
1291	struct idpf_adapter *adapter = idpf_netdev_to_adapter(netdev);
1292
1293	return adapter->msg_enable;
1294}
1295
1296/**
1297 * idpf_set_msglevel - Set debug message level
1298 * @netdev: network interface device structure
1299 * @data: message level
1300 *
1301 * Set current debug message level. Higher values cause the driver to
1302 * be noisier.
1303 */
1304static void idpf_set_msglevel(struct net_device *netdev, u32 data)
1305{
1306	struct idpf_adapter *adapter = idpf_netdev_to_adapter(netdev);
1307
1308	adapter->msg_enable = data;
1309}
1310
1311/**
1312 * idpf_get_link_ksettings - Get Link Speed and Duplex settings
1313 * @netdev: network interface device structure
1314 * @cmd: ethtool command
1315 *
1316 * Reports speed/duplex settings.
1317 **/
1318static int idpf_get_link_ksettings(struct net_device *netdev,
1319				   struct ethtool_link_ksettings *cmd)
1320{
1321	struct idpf_vport *vport;
1322
1323	idpf_vport_ctrl_lock(netdev);
1324	vport = idpf_netdev_to_vport(netdev);
1325
1326	ethtool_link_ksettings_zero_link_mode(cmd, supported);
1327	cmd->base.autoneg = AUTONEG_DISABLE;
1328	cmd->base.port = PORT_NONE;
1329	if (vport->link_up) {
1330		cmd->base.duplex = DUPLEX_FULL;
1331		cmd->base.speed = vport->link_speed_mbps;
1332	} else {
1333		cmd->base.duplex = DUPLEX_UNKNOWN;
1334		cmd->base.speed = SPEED_UNKNOWN;
1335	}
1336
1337	idpf_vport_ctrl_unlock(netdev);
1338
1339	return 0;
1340}
1341
1342static const struct ethtool_ops idpf_ethtool_ops = {
1343	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
1344				     ETHTOOL_COALESCE_USE_ADAPTIVE,
1345	.supported_ring_params	= ETHTOOL_RING_USE_TCP_DATA_SPLIT,
1346	.get_msglevel		= idpf_get_msglevel,
1347	.set_msglevel		= idpf_set_msglevel,
1348	.get_link		= ethtool_op_get_link,
1349	.get_coalesce		= idpf_get_coalesce,
1350	.set_coalesce		= idpf_set_coalesce,
1351	.get_per_queue_coalesce = idpf_get_per_q_coalesce,
1352	.set_per_queue_coalesce = idpf_set_per_q_coalesce,
1353	.get_ethtool_stats	= idpf_get_ethtool_stats,
1354	.get_strings		= idpf_get_strings,
1355	.get_sset_count		= idpf_get_sset_count,
1356	.get_channels		= idpf_get_channels,
1357	.get_rxnfc		= idpf_get_rxnfc,
1358	.get_rxfh_key_size	= idpf_get_rxfh_key_size,
1359	.get_rxfh_indir_size	= idpf_get_rxfh_indir_size,
1360	.get_rxfh		= idpf_get_rxfh,
1361	.set_rxfh		= idpf_set_rxfh,
1362	.set_channels		= idpf_set_channels,
1363	.get_ringparam		= idpf_get_ringparam,
1364	.set_ringparam		= idpf_set_ringparam,
1365	.get_link_ksettings	= idpf_get_link_ksettings,
1366};
1367
1368/**
1369 * idpf_set_ethtool_ops - Initialize ethtool ops struct
1370 * @netdev: network interface device structure
1371 *
1372 * Sets ethtool ops struct in our netdev so that ethtool can call
1373 * our functions.
1374 */
1375void idpf_set_ethtool_ops(struct net_device *netdev)
1376{
1377	netdev->ethtool_ops = &idpf_ethtool_ops;
1378}
1379