1/* lance.c: An AMD LANCE/PCnet ethernet driver for Linux. */ 2/* 3 Written/copyright 1993-1998 by Donald Becker. 4 5 Copyright 1993 United States Government as represented by the 6 Director, National Security Agency. 7 This software may be used and distributed according to the terms 8 of the GNU General Public License, incorporated herein by reference. 9 10 This driver is for the Allied Telesis AT1500 and HP J2405A, and should work 11 with most other LANCE-based bus-master (NE2100/NE2500) ethercards. 12 13 The author may be reached as becker@scyld.com, or C/O 14 Scyld Computing Corporation 15 410 Severn Ave., Suite 210 16 Annapolis MD 21403 17 18 Andrey V. Savochkin: 19 - alignment problem with 1.3.* kernel and some minor changes. 20 Thomas Bogendoerfer (tsbogend@bigbug.franken.de): 21 - added support for Linux/Alpha, but removed most of it, because 22 it worked only for the PCI chip. 23 - added hook for the 32bit lance driver 24 - added PCnetPCI II (79C970A) to chip table 25 Paul Gortmaker (gpg109@rsphy1.anu.edu.au): 26 - hopefully fix above so Linux/Alpha can use ISA cards too. 27 8/20/96 Fixed 7990 autoIRQ failure and reversed unneeded alignment -djb 28 v1.12 10/27/97 Module support -djb 29 v1.14 2/3/98 Module support modified, made PCI support optional -djb 30 v1.15 5/27/99 Fixed bug in the cleanup_module(). dev->priv was freed 31 before unregister_netdev() which caused NULL pointer 32 reference later in the chain (in rtnetlink_fill_ifinfo()) 33 -- Mika Kuoppala <miku@iki.fi> 34 35 Forward ported v1.14 to 2.1.129, merged the PCI and misc changes from 36 the 2.1 version of the old driver - Alan Cox 37 38 Get rid of check_region, check kmalloc return in lance_probe1 39 Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 11/01/2001 40 41 Reworked detection, added support for Racal InterLan EtherBlaster cards 42 Vesselin Kostadinov <vesok at yahoo dot com > - 22/4/2004 43*/ 44 45static const char version[] = "lance.c:v1.16 2006/11/09 dplatt@3do.com, becker@cesdis.gsfc.nasa.gov\n"; 46 47#include <linux/module.h> 48#include <linux/kernel.h> 49#include <linux/string.h> 50#include <linux/delay.h> 51#include <linux/errno.h> 52#include <linux/ioport.h> 53#include <linux/slab.h> 54#include <linux/interrupt.h> 55#include <linux/pci.h> 56#include <linux/init.h> 57#include <linux/netdevice.h> 58#include <linux/etherdevice.h> 59#include <linux/skbuff.h> 60#include <linux/mm.h> 61#include <linux/bitops.h> 62#include <net/Space.h> 63 64#include <asm/io.h> 65#include <asm/dma.h> 66 67static unsigned int lance_portlist[] __initdata = { 0x300, 0x320, 0x340, 0x360, 0}; 68static int lance_probe1(struct net_device *dev, int ioaddr, int irq, int options); 69static int __init do_lance_probe(struct net_device *dev); 70 71 72static struct card { 73 char id_offset14; 74 char id_offset15; 75} cards[] = { 76 { //"normal" 77 .id_offset14 = 0x57, 78 .id_offset15 = 0x57, 79 }, 80 { //NI6510EB 81 .id_offset14 = 0x52, 82 .id_offset15 = 0x44, 83 }, 84 { //Racal InterLan EtherBlaster 85 .id_offset14 = 0x52, 86 .id_offset15 = 0x49, 87 }, 88}; 89#define NUM_CARDS 3 90 91#ifdef LANCE_DEBUG 92static int lance_debug = LANCE_DEBUG; 93#else 94static int lance_debug = 1; 95#endif 96 97/* 98 Theory of Operation 99 100I. Board Compatibility 101 102This device driver is designed for the AMD 79C960, the "PCnet-ISA 103single-chip ethernet controller for ISA". This chip is used in a wide 104variety of boards from vendors such as Allied Telesis, HP, Kingston, 105and Boca. This driver is also intended to work with older AMD 7990 106designs, such as the NE1500 and NE2100, and newer 79C961. For convenience, 107I use the name LANCE to refer to all of the AMD chips, even though it properly 108refers only to the original 7990. 109 110II. Board-specific settings 111 112The driver is designed to work the boards that use the faster 113bus-master mode, rather than in shared memory mode. (Only older designs 114have on-board buffer memory needed to support the slower shared memory mode.) 115 116Most ISA boards have jumpered settings for the I/O base, IRQ line, and DMA 117channel. This driver probes the likely base addresses: 118{0x300, 0x320, 0x340, 0x360}. 119After the board is found it generates a DMA-timeout interrupt and uses 120autoIRQ to find the IRQ line. The DMA channel can be set with the low bits 121of the otherwise-unused dev->mem_start value (aka PARAM1). If unset it is 122probed for by enabling each free DMA channel in turn and checking if 123initialization succeeds. 124 125The HP-J2405A board is an exception: with this board it is easy to read the 126EEPROM-set values for the base, IRQ, and DMA. (Of course you must already 127_know_ the base address -- that field is for writing the EEPROM.) 128 129III. Driver operation 130 131IIIa. Ring buffers 132The LANCE uses ring buffers of Tx and Rx descriptors. Each entry describes 133the base and length of the data buffer, along with status bits. The length 134of these buffers is set by LANCE_LOG_{RX,TX}_BUFFERS, which is log_2() of 135the buffer length (rather than being directly the buffer length) for 136implementation ease. The current values are 2 (Tx) and 4 (Rx), which leads to 137ring sizes of 4 (Tx) and 16 (Rx). Increasing the number of ring entries 138needlessly uses extra space and reduces the chance that an upper layer will 139be able to reorder queued Tx packets based on priority. Decreasing the number 140of entries makes it more difficult to achieve back-to-back packet transmission 141and increases the chance that Rx ring will overflow. (Consider the worst case 142of receiving back-to-back minimum-sized packets.) 143 144The LANCE has the capability to "chain" both Rx and Tx buffers, but this driver 145statically allocates full-sized (slightly oversized -- PKT_BUF_SZ) buffers to 146avoid the administrative overhead. For the Rx side this avoids dynamically 147allocating full-sized buffers "just in case", at the expense of a 148memory-to-memory data copy for each packet received. For most systems this 149is a good tradeoff: the Rx buffer will always be in low memory, the copy 150is inexpensive, and it primes the cache for later packet processing. For Tx 151the buffers are only used when needed as low-memory bounce buffers. 152 153IIIB. 16M memory limitations. 154For the ISA bus master mode all structures used directly by the LANCE, 155the initialization block, Rx and Tx rings, and data buffers, must be 156accessible from the ISA bus, i.e. in the lower 16M of real memory. 157This is a problem for current Linux kernels on >16M machines. The network 158devices are initialized after memory initialization, and the kernel doles out 159memory from the top of memory downward. The current solution is to have a 160special network initialization routine that's called before memory 161initialization; this will eventually be generalized for all network devices. 162As mentioned before, low-memory "bounce-buffers" are used when needed. 163 164IIIC. Synchronization 165The driver runs as two independent, single-threaded flows of control. One 166is the send-packet routine, which enforces single-threaded use by the 167dev->tbusy flag. The other thread is the interrupt handler, which is single 168threaded by the hardware and other software. 169 170The send packet thread has partial control over the Tx ring and 'dev->tbusy' 171flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next 172queue slot is empty, it clears the tbusy flag when finished otherwise it sets 173the 'lp->tx_full' flag. 174 175The interrupt handler has exclusive control over the Rx ring and records stats 176from the Tx ring. (The Tx-done interrupt can't be selectively turned off, so 177we can't avoid the interrupt overhead by having the Tx routine reap the Tx 178stats.) After reaping the stats, it marks the queue entry as empty by setting 179the 'base' to zero. Iff the 'lp->tx_full' flag is set, it clears both the 180tx_full and tbusy flags. 181 182*/ 183 184/* Set the number of Tx and Rx buffers, using Log_2(# buffers). 185 Reasonable default values are 16 Tx buffers, and 16 Rx buffers. 186 That translates to 4 and 4 (16 == 2^^4). 187 This is a compile-time option for efficiency. 188 */ 189#ifndef LANCE_LOG_TX_BUFFERS 190#define LANCE_LOG_TX_BUFFERS 4 191#define LANCE_LOG_RX_BUFFERS 4 192#endif 193 194#define TX_RING_SIZE (1 << (LANCE_LOG_TX_BUFFERS)) 195#define TX_RING_MOD_MASK (TX_RING_SIZE - 1) 196#define TX_RING_LEN_BITS ((LANCE_LOG_TX_BUFFERS) << 29) 197 198#define RX_RING_SIZE (1 << (LANCE_LOG_RX_BUFFERS)) 199#define RX_RING_MOD_MASK (RX_RING_SIZE - 1) 200#define RX_RING_LEN_BITS ((LANCE_LOG_RX_BUFFERS) << 29) 201 202#define PKT_BUF_SZ 1544 203 204/* Offsets from base I/O address. */ 205#define LANCE_DATA 0x10 206#define LANCE_ADDR 0x12 207#define LANCE_RESET 0x14 208#define LANCE_BUS_IF 0x16 209#define LANCE_TOTAL_SIZE 0x18 210 211#define TX_TIMEOUT (HZ/5) 212 213/* The LANCE Rx and Tx ring descriptors. */ 214struct lance_rx_head { 215 s32 base; 216 s16 buf_length; /* This length is 2s complement (negative)! */ 217 s16 msg_length; /* This length is "normal". */ 218}; 219 220struct lance_tx_head { 221 s32 base; 222 s16 length; /* Length is 2s complement (negative)! */ 223 s16 misc; 224}; 225 226/* The LANCE initialization block, described in databook. */ 227struct lance_init_block { 228 u16 mode; /* Pre-set mode (reg. 15) */ 229 u8 phys_addr[6]; /* Physical ethernet address */ 230 u32 filter[2]; /* Multicast filter (unused). */ 231 /* Receive and transmit ring base, along with extra bits. */ 232 u32 rx_ring; /* Tx and Rx ring base pointers */ 233 u32 tx_ring; 234}; 235 236struct lance_private { 237 /* The Tx and Rx ring entries must be aligned on 8-byte boundaries. */ 238 struct lance_rx_head rx_ring[RX_RING_SIZE]; 239 struct lance_tx_head tx_ring[TX_RING_SIZE]; 240 struct lance_init_block init_block; 241 const char *name; 242 /* The saved address of a sent-in-place packet/buffer, for skfree(). */ 243 struct sk_buff* tx_skbuff[TX_RING_SIZE]; 244 /* The addresses of receive-in-place skbuffs. */ 245 struct sk_buff* rx_skbuff[RX_RING_SIZE]; 246 unsigned long rx_buffs; /* Address of Rx and Tx buffers. */ 247 /* Tx low-memory "bounce buffer" address. */ 248 char (*tx_bounce_buffs)[PKT_BUF_SZ]; 249 int cur_rx, cur_tx; /* The next free ring entry */ 250 int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */ 251 int dma; 252 unsigned char chip_version; /* See lance_chip_type. */ 253 spinlock_t devlock; 254}; 255 256#define LANCE_MUST_PAD 0x00000001 257#define LANCE_ENABLE_AUTOSELECT 0x00000002 258#define LANCE_MUST_REINIT_RING 0x00000004 259#define LANCE_MUST_UNRESET 0x00000008 260#define LANCE_HAS_MISSED_FRAME 0x00000010 261 262/* A mapping from the chip ID number to the part number and features. 263 These are from the datasheets -- in real life the '970 version 264 reportedly has the same ID as the '965. */ 265static struct lance_chip_type { 266 int id_number; 267 const char *name; 268 int flags; 269} chip_table[] = { 270 {0x0000, "LANCE 7990", /* Ancient lance chip. */ 271 LANCE_MUST_PAD + LANCE_MUST_UNRESET}, 272 {0x0003, "PCnet/ISA 79C960", /* 79C960 PCnet/ISA. */ 273 LANCE_ENABLE_AUTOSELECT + LANCE_MUST_REINIT_RING + 274 LANCE_HAS_MISSED_FRAME}, 275 {0x2260, "PCnet/ISA+ 79C961", /* 79C961 PCnet/ISA+, Plug-n-Play. */ 276 LANCE_ENABLE_AUTOSELECT + LANCE_MUST_REINIT_RING + 277 LANCE_HAS_MISSED_FRAME}, 278 {0x2420, "PCnet/PCI 79C970", /* 79C970 or 79C974 PCnet-SCSI, PCI. */ 279 LANCE_ENABLE_AUTOSELECT + LANCE_MUST_REINIT_RING + 280 LANCE_HAS_MISSED_FRAME}, 281 /* Bug: the PCnet/PCI actually uses the PCnet/VLB ID number, so just call 282 it the PCnet32. */ 283 {0x2430, "PCnet32", /* 79C965 PCnet for VL bus. */ 284 LANCE_ENABLE_AUTOSELECT + LANCE_MUST_REINIT_RING + 285 LANCE_HAS_MISSED_FRAME}, 286 {0x2621, "PCnet/PCI-II 79C970A", /* 79C970A PCInetPCI II. */ 287 LANCE_ENABLE_AUTOSELECT + LANCE_MUST_REINIT_RING + 288 LANCE_HAS_MISSED_FRAME}, 289 {0x0, "PCnet (unknown)", 290 LANCE_ENABLE_AUTOSELECT + LANCE_MUST_REINIT_RING + 291 LANCE_HAS_MISSED_FRAME}, 292}; 293 294enum {OLD_LANCE = 0, PCNET_ISA=1, PCNET_ISAP=2, PCNET_PCI=3, PCNET_VLB=4, PCNET_PCI_II=5, LANCE_UNKNOWN=6}; 295 296 297/* Non-zero if lance_probe1() needs to allocate low-memory bounce buffers. 298 Assume yes until we know the memory size. */ 299static unsigned char lance_need_isa_bounce_buffers = 1; 300 301static int lance_open(struct net_device *dev); 302static void lance_init_ring(struct net_device *dev, gfp_t mode); 303static netdev_tx_t lance_start_xmit(struct sk_buff *skb, 304 struct net_device *dev); 305static int lance_rx(struct net_device *dev); 306static irqreturn_t lance_interrupt(int irq, void *dev_id); 307static int lance_close(struct net_device *dev); 308static struct net_device_stats *lance_get_stats(struct net_device *dev); 309static void set_multicast_list(struct net_device *dev); 310static void lance_tx_timeout (struct net_device *dev, unsigned int txqueue); 311 312 313 314#ifdef MODULE 315#define MAX_CARDS 8 /* Max number of interfaces (cards) per module */ 316 317static struct net_device *dev_lance[MAX_CARDS]; 318static int io[MAX_CARDS]; 319static int dma[MAX_CARDS]; 320static int irq[MAX_CARDS]; 321 322module_param_hw_array(io, int, ioport, NULL, 0); 323module_param_hw_array(dma, int, dma, NULL, 0); 324module_param_hw_array(irq, int, irq, NULL, 0); 325module_param(lance_debug, int, 0); 326MODULE_PARM_DESC(io, "LANCE/PCnet I/O base address(es),required"); 327MODULE_PARM_DESC(dma, "LANCE/PCnet ISA DMA channel (ignored for some devices)"); 328MODULE_PARM_DESC(irq, "LANCE/PCnet IRQ number (ignored for some devices)"); 329MODULE_PARM_DESC(lance_debug, "LANCE/PCnet debug level (0-7)"); 330 331static int __init lance_init_module(void) 332{ 333 struct net_device *dev; 334 int this_dev, found = 0; 335 336 for (this_dev = 0; this_dev < MAX_CARDS; this_dev++) { 337 if (io[this_dev] == 0) { 338 if (this_dev != 0) /* only complain once */ 339 break; 340 printk(KERN_NOTICE "lance.c: Module autoprobing not allowed. Append \"io=0xNNN\" value(s).\n"); 341 return -EPERM; 342 } 343 dev = alloc_etherdev(0); 344 if (!dev) 345 break; 346 dev->irq = irq[this_dev]; 347 dev->base_addr = io[this_dev]; 348 dev->dma = dma[this_dev]; 349 if (do_lance_probe(dev) == 0) { 350 dev_lance[found++] = dev; 351 continue; 352 } 353 free_netdev(dev); 354 break; 355 } 356 if (found != 0) 357 return 0; 358 return -ENXIO; 359} 360module_init(lance_init_module); 361 362static void cleanup_card(struct net_device *dev) 363{ 364 struct lance_private *lp = dev->ml_priv; 365 if (dev->dma != 4) 366 free_dma(dev->dma); 367 release_region(dev->base_addr, LANCE_TOTAL_SIZE); 368 kfree(lp->tx_bounce_buffs); 369 kfree((void*)lp->rx_buffs); 370 kfree(lp); 371} 372 373static void __exit lance_cleanup_module(void) 374{ 375 int this_dev; 376 377 for (this_dev = 0; this_dev < MAX_CARDS; this_dev++) { 378 struct net_device *dev = dev_lance[this_dev]; 379 if (dev) { 380 unregister_netdev(dev); 381 cleanup_card(dev); 382 free_netdev(dev); 383 } 384 } 385} 386module_exit(lance_cleanup_module); 387#endif /* MODULE */ 388MODULE_LICENSE("GPL"); 389 390 391/* Starting in v2.1.*, the LANCE/PCnet probe is now similar to the other 392 board probes now that kmalloc() can allocate ISA DMA-able regions. 393 This also allows the LANCE driver to be used as a module. 394 */ 395static int __init do_lance_probe(struct net_device *dev) 396{ 397 unsigned int *port; 398 int result; 399 400 if (high_memory <= phys_to_virt(16*1024*1024)) 401 lance_need_isa_bounce_buffers = 0; 402 403 for (port = lance_portlist; *port; port++) { 404 int ioaddr = *port; 405 struct resource *r = request_region(ioaddr, LANCE_TOTAL_SIZE, 406 "lance-probe"); 407 408 if (r) { 409 /* Detect the card with minimal I/O reads */ 410 char offset14 = inb(ioaddr + 14); 411 int card; 412 for (card = 0; card < NUM_CARDS; ++card) 413 if (cards[card].id_offset14 == offset14) 414 break; 415 if (card < NUM_CARDS) {/*yes, the first byte matches*/ 416 char offset15 = inb(ioaddr + 15); 417 for (card = 0; card < NUM_CARDS; ++card) 418 if ((cards[card].id_offset14 == offset14) && 419 (cards[card].id_offset15 == offset15)) 420 break; 421 } 422 if (card < NUM_CARDS) { /*Signature OK*/ 423 result = lance_probe1(dev, ioaddr, 0, 0); 424 if (!result) { 425 struct lance_private *lp = dev->ml_priv; 426 int ver = lp->chip_version; 427 428 r->name = chip_table[ver].name; 429 return 0; 430 } 431 } 432 release_region(ioaddr, LANCE_TOTAL_SIZE); 433 } 434 } 435 return -ENODEV; 436} 437 438#ifndef MODULE 439struct net_device * __init lance_probe(int unit) 440{ 441 struct net_device *dev = alloc_etherdev(0); 442 int err; 443 444 if (!dev) 445 return ERR_PTR(-ENODEV); 446 447 sprintf(dev->name, "eth%d", unit); 448 netdev_boot_setup_check(dev); 449 450 err = do_lance_probe(dev); 451 if (err) 452 goto out; 453 return dev; 454out: 455 free_netdev(dev); 456 return ERR_PTR(err); 457} 458#endif 459 460static const struct net_device_ops lance_netdev_ops = { 461 .ndo_open = lance_open, 462 .ndo_start_xmit = lance_start_xmit, 463 .ndo_stop = lance_close, 464 .ndo_get_stats = lance_get_stats, 465 .ndo_set_rx_mode = set_multicast_list, 466 .ndo_tx_timeout = lance_tx_timeout, 467 .ndo_set_mac_address = eth_mac_addr, 468 .ndo_validate_addr = eth_validate_addr, 469}; 470 471static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int options) 472{ 473 struct lance_private *lp; 474 unsigned long dma_channels; /* Mark spuriously-busy DMA channels */ 475 int i, reset_val, lance_version; 476 const char *chipname; 477 /* Flags for specific chips or boards. */ 478 unsigned char hpJ2405A = 0; /* HP ISA adaptor */ 479 int hp_builtin = 0; /* HP on-board ethernet. */ 480 static int did_version; /* Already printed version info. */ 481 unsigned long flags; 482 int err = -ENOMEM; 483 void __iomem *bios; 484 u8 addr[ETH_ALEN]; 485 486 /* First we look for special cases. 487 Check for HP's on-board ethernet by looking for 'HP' in the BIOS. 488 There are two HP versions, check the BIOS for the configuration port. 489 This method provided by L. Julliard, Laurent_Julliard@grenoble.hp.com. 490 */ 491 bios = ioremap(0xf00f0, 0x14); 492 if (!bios) 493 return -ENOMEM; 494 if (readw(bios + 0x12) == 0x5048) { 495 static const short ioaddr_table[] = { 0x300, 0x320, 0x340, 0x360}; 496 int hp_port = (readl(bios + 1) & 1) ? 0x499 : 0x99; 497 /* We can have boards other than the built-in! Verify this is on-board. */ 498 if ((inb(hp_port) & 0xc0) == 0x80 && 499 ioaddr_table[inb(hp_port) & 3] == ioaddr) 500 hp_builtin = hp_port; 501 } 502 iounmap(bios); 503 /* We also recognize the HP Vectra on-board here, but check below. */ 504 hpJ2405A = (inb(ioaddr) == 0x08 && inb(ioaddr+1) == 0x00 && 505 inb(ioaddr+2) == 0x09); 506 507 /* Reset the LANCE. */ 508 reset_val = inw(ioaddr+LANCE_RESET); /* Reset the LANCE */ 509 510 /* The Un-Reset needed is only needed for the real NE2100, and will 511 confuse the HP board. */ 512 if (!hpJ2405A) 513 outw(reset_val, ioaddr+LANCE_RESET); 514 515 outw(0x0000, ioaddr+LANCE_ADDR); /* Switch to window 0 */ 516 if (inw(ioaddr+LANCE_DATA) != 0x0004) 517 return -ENODEV; 518 519 /* Get the version of the chip. */ 520 outw(88, ioaddr+LANCE_ADDR); 521 if (inw(ioaddr+LANCE_ADDR) != 88) { 522 lance_version = 0; 523 } else { /* Good, it's a newer chip. */ 524 int chip_version = inw(ioaddr+LANCE_DATA); 525 outw(89, ioaddr+LANCE_ADDR); 526 chip_version |= inw(ioaddr+LANCE_DATA) << 16; 527 if (lance_debug > 2) 528 printk(" LANCE chip version is %#x.\n", chip_version); 529 if ((chip_version & 0xfff) != 0x003) 530 return -ENODEV; 531 chip_version = (chip_version >> 12) & 0xffff; 532 for (lance_version = 1; chip_table[lance_version].id_number; lance_version++) { 533 if (chip_table[lance_version].id_number == chip_version) 534 break; 535 } 536 } 537 538 /* We can't allocate private data from alloc_etherdev() because it must 539 a ISA DMA-able region. */ 540 chipname = chip_table[lance_version].name; 541 printk("%s: %s at %#3x, ", dev->name, chipname, ioaddr); 542 543 /* There is a 16 byte station address PROM at the base address. 544 The first six bytes are the station address. */ 545 for (i = 0; i < 6; i++) 546 addr[i] = inb(ioaddr + i); 547 eth_hw_addr_set(dev, addr); 548 printk("%pM", dev->dev_addr); 549 550 dev->base_addr = ioaddr; 551 /* Make certain the data structures used by the LANCE are aligned and DMAble. */ 552 553 lp = kzalloc(sizeof(*lp), GFP_DMA | GFP_KERNEL); 554 if (!lp) 555 return -ENOMEM; 556 if (lance_debug > 6) printk(" (#0x%05lx)", (unsigned long)lp); 557 dev->ml_priv = lp; 558 lp->name = chipname; 559 lp->rx_buffs = (unsigned long)kmalloc_array(RX_RING_SIZE, PKT_BUF_SZ, 560 GFP_DMA | GFP_KERNEL); 561 if (!lp->rx_buffs) 562 goto out_lp; 563 if (lance_need_isa_bounce_buffers) { 564 lp->tx_bounce_buffs = kmalloc_array(TX_RING_SIZE, PKT_BUF_SZ, 565 GFP_DMA | GFP_KERNEL); 566 if (!lp->tx_bounce_buffs) 567 goto out_rx; 568 } else 569 lp->tx_bounce_buffs = NULL; 570 571 lp->chip_version = lance_version; 572 spin_lock_init(&lp->devlock); 573 574 lp->init_block.mode = 0x0003; /* Disable Rx and Tx. */ 575 for (i = 0; i < 6; i++) 576 lp->init_block.phys_addr[i] = dev->dev_addr[i]; 577 lp->init_block.filter[0] = 0x00000000; 578 lp->init_block.filter[1] = 0x00000000; 579 lp->init_block.rx_ring = ((u32)isa_virt_to_bus(lp->rx_ring) & 0xffffff) | RX_RING_LEN_BITS; 580 lp->init_block.tx_ring = ((u32)isa_virt_to_bus(lp->tx_ring) & 0xffffff) | TX_RING_LEN_BITS; 581 582 outw(0x0001, ioaddr+LANCE_ADDR); 583 inw(ioaddr+LANCE_ADDR); 584 outw((short) (u32) isa_virt_to_bus(&lp->init_block), ioaddr+LANCE_DATA); 585 outw(0x0002, ioaddr+LANCE_ADDR); 586 inw(ioaddr+LANCE_ADDR); 587 outw(((u32)isa_virt_to_bus(&lp->init_block)) >> 16, ioaddr+LANCE_DATA); 588 outw(0x0000, ioaddr+LANCE_ADDR); 589 inw(ioaddr+LANCE_ADDR); 590 591 if (irq) { /* Set iff PCI card. */ 592 dev->dma = 4; /* Native bus-master, no DMA channel needed. */ 593 dev->irq = irq; 594 } else if (hp_builtin) { 595 static const char dma_tbl[4] = {3, 5, 6, 0}; 596 static const char irq_tbl[4] = {3, 4, 5, 9}; 597 unsigned char port_val = inb(hp_builtin); 598 dev->dma = dma_tbl[(port_val >> 4) & 3]; 599 dev->irq = irq_tbl[(port_val >> 2) & 3]; 600 printk(" HP Vectra IRQ %d DMA %d.\n", dev->irq, dev->dma); 601 } else if (hpJ2405A) { 602 static const char dma_tbl[4] = {3, 5, 6, 7}; 603 static const char irq_tbl[8] = {3, 4, 5, 9, 10, 11, 12, 15}; 604 short reset_val = inw(ioaddr+LANCE_RESET); 605 dev->dma = dma_tbl[(reset_val >> 2) & 3]; 606 dev->irq = irq_tbl[(reset_val >> 4) & 7]; 607 printk(" HP J2405A IRQ %d DMA %d.\n", dev->irq, dev->dma); 608 } else if (lance_version == PCNET_ISAP) { /* The plug-n-play version. */ 609 short bus_info; 610 outw(8, ioaddr+LANCE_ADDR); 611 bus_info = inw(ioaddr+LANCE_BUS_IF); 612 dev->dma = bus_info & 0x07; 613 dev->irq = (bus_info >> 4) & 0x0F; 614 } else { 615 /* The DMA channel may be passed in PARAM1. */ 616 if (dev->mem_start & 0x07) 617 dev->dma = dev->mem_start & 0x07; 618 } 619 620 if (dev->dma == 0) { 621 /* Read the DMA channel status register, so that we can avoid 622 stuck DMA channels in the DMA detection below. */ 623 dma_channels = ((inb(DMA1_STAT_REG) >> 4) & 0x0f) | 624 (inb(DMA2_STAT_REG) & 0xf0); 625 } 626 err = -ENODEV; 627 if (dev->irq >= 2) 628 printk(" assigned IRQ %d", dev->irq); 629 else if (lance_version != 0) { /* 7990 boards need DMA detection first. */ 630 unsigned long irq_mask; 631 632 /* To auto-IRQ we enable the initialization-done and DMA error 633 interrupts. For ISA boards we get a DMA error, but VLB and PCI 634 boards will work. */ 635 irq_mask = probe_irq_on(); 636 637 /* Trigger an initialization just for the interrupt. */ 638 outw(0x0041, ioaddr+LANCE_DATA); 639 640 mdelay(20); 641 dev->irq = probe_irq_off(irq_mask); 642 if (dev->irq) 643 printk(", probed IRQ %d", dev->irq); 644 else { 645 printk(", failed to detect IRQ line.\n"); 646 goto out_tx; 647 } 648 649 /* Check for the initialization done bit, 0x0100, which means 650 that we don't need a DMA channel. */ 651 if (inw(ioaddr+LANCE_DATA) & 0x0100) 652 dev->dma = 4; 653 } 654 655 if (dev->dma == 4) { 656 printk(", no DMA needed.\n"); 657 } else if (dev->dma) { 658 if (request_dma(dev->dma, chipname)) { 659 printk("DMA %d allocation failed.\n", dev->dma); 660 goto out_tx; 661 } else 662 printk(", assigned DMA %d.\n", dev->dma); 663 } else { /* OK, we have to auto-DMA. */ 664 for (i = 0; i < 4; i++) { 665 static const char dmas[] = { 5, 6, 7, 3 }; 666 int dma = dmas[i]; 667 int boguscnt; 668 669 /* Don't enable a permanently busy DMA channel, or the machine 670 will hang. */ 671 if (test_bit(dma, &dma_channels)) 672 continue; 673 outw(0x7f04, ioaddr+LANCE_DATA); /* Clear the memory error bits. */ 674 if (request_dma(dma, chipname)) 675 continue; 676 677 flags=claim_dma_lock(); 678 set_dma_mode(dma, DMA_MODE_CASCADE); 679 enable_dma(dma); 680 release_dma_lock(flags); 681 682 /* Trigger an initialization. */ 683 outw(0x0001, ioaddr+LANCE_DATA); 684 for (boguscnt = 100; boguscnt > 0; --boguscnt) 685 if (inw(ioaddr+LANCE_DATA) & 0x0900) 686 break; 687 if (inw(ioaddr+LANCE_DATA) & 0x0100) { 688 dev->dma = dma; 689 printk(", DMA %d.\n", dev->dma); 690 break; 691 } else { 692 flags=claim_dma_lock(); 693 disable_dma(dma); 694 release_dma_lock(flags); 695 free_dma(dma); 696 } 697 } 698 if (i == 4) { /* Failure: bail. */ 699 printk("DMA detection failed.\n"); 700 goto out_tx; 701 } 702 } 703 704 if (lance_version == 0 && dev->irq == 0) { 705 /* We may auto-IRQ now that we have a DMA channel. */ 706 /* Trigger an initialization just for the interrupt. */ 707 unsigned long irq_mask; 708 709 irq_mask = probe_irq_on(); 710 outw(0x0041, ioaddr+LANCE_DATA); 711 712 mdelay(40); 713 dev->irq = probe_irq_off(irq_mask); 714 if (dev->irq == 0) { 715 printk(" Failed to detect the 7990 IRQ line.\n"); 716 goto out_dma; 717 } 718 printk(" Auto-IRQ detected IRQ%d.\n", dev->irq); 719 } 720 721 if (chip_table[lp->chip_version].flags & LANCE_ENABLE_AUTOSELECT) { 722 /* Turn on auto-select of media (10baseT or BNC) so that the user 723 can watch the LEDs even if the board isn't opened. */ 724 outw(0x0002, ioaddr+LANCE_ADDR); 725 /* Don't touch 10base2 power bit. */ 726 outw(inw(ioaddr+LANCE_BUS_IF) | 0x0002, ioaddr+LANCE_BUS_IF); 727 } 728 729 if (lance_debug > 0 && did_version++ == 0) 730 printk(version); 731 732 /* The LANCE-specific entries in the device structure. */ 733 dev->netdev_ops = &lance_netdev_ops; 734 dev->watchdog_timeo = TX_TIMEOUT; 735 736 err = register_netdev(dev); 737 if (err) 738 goto out_dma; 739 return 0; 740out_dma: 741 if (dev->dma != 4) 742 free_dma(dev->dma); 743out_tx: 744 kfree(lp->tx_bounce_buffs); 745out_rx: 746 kfree((void*)lp->rx_buffs); 747out_lp: 748 kfree(lp); 749 return err; 750} 751 752 753static int 754lance_open(struct net_device *dev) 755{ 756 struct lance_private *lp = dev->ml_priv; 757 int ioaddr = dev->base_addr; 758 int i; 759 760 if (dev->irq == 0 || 761 request_irq(dev->irq, lance_interrupt, 0, dev->name, dev)) { 762 return -EAGAIN; 763 } 764 765 /* We used to allocate DMA here, but that was silly. 766 DMA lines can't be shared! We now permanently allocate them. */ 767 768 /* Reset the LANCE */ 769 inw(ioaddr+LANCE_RESET); 770 771 /* The DMA controller is used as a no-operation slave, "cascade mode". */ 772 if (dev->dma != 4) { 773 unsigned long flags=claim_dma_lock(); 774 enable_dma(dev->dma); 775 set_dma_mode(dev->dma, DMA_MODE_CASCADE); 776 release_dma_lock(flags); 777 } 778 779 /* Un-Reset the LANCE, needed only for the NE2100. */ 780 if (chip_table[lp->chip_version].flags & LANCE_MUST_UNRESET) 781 outw(0, ioaddr+LANCE_RESET); 782 783 if (chip_table[lp->chip_version].flags & LANCE_ENABLE_AUTOSELECT) { 784 /* This is 79C960-specific: Turn on auto-select of media (AUI, BNC). */ 785 outw(0x0002, ioaddr+LANCE_ADDR); 786 /* Only touch autoselect bit. */ 787 outw(inw(ioaddr+LANCE_BUS_IF) | 0x0002, ioaddr+LANCE_BUS_IF); 788 } 789 790 if (lance_debug > 1) 791 printk("%s: lance_open() irq %d dma %d tx/rx rings %#x/%#x init %#x.\n", 792 dev->name, dev->irq, dev->dma, 793 (u32) isa_virt_to_bus(lp->tx_ring), 794 (u32) isa_virt_to_bus(lp->rx_ring), 795 (u32) isa_virt_to_bus(&lp->init_block)); 796 797 lance_init_ring(dev, GFP_KERNEL); 798 /* Re-initialize the LANCE, and start it when done. */ 799 outw(0x0001, ioaddr+LANCE_ADDR); 800 outw((short) (u32) isa_virt_to_bus(&lp->init_block), ioaddr+LANCE_DATA); 801 outw(0x0002, ioaddr+LANCE_ADDR); 802 outw(((u32)isa_virt_to_bus(&lp->init_block)) >> 16, ioaddr+LANCE_DATA); 803 804 outw(0x0004, ioaddr+LANCE_ADDR); 805 outw(0x0915, ioaddr+LANCE_DATA); 806 807 outw(0x0000, ioaddr+LANCE_ADDR); 808 outw(0x0001, ioaddr+LANCE_DATA); 809 810 netif_start_queue (dev); 811 812 i = 0; 813 while (i++ < 100) 814 if (inw(ioaddr+LANCE_DATA) & 0x0100) 815 break; 816 /* 817 * We used to clear the InitDone bit, 0x0100, here but Mark Stockton 818 * reports that doing so triggers a bug in the '974. 819 */ 820 outw(0x0042, ioaddr+LANCE_DATA); 821 822 if (lance_debug > 2) 823 printk("%s: LANCE open after %d ticks, init block %#x csr0 %4.4x.\n", 824 dev->name, i, (u32) isa_virt_to_bus(&lp->init_block), inw(ioaddr+LANCE_DATA)); 825 826 return 0; /* Always succeed */ 827} 828 829/* The LANCE has been halted for one reason or another (busmaster memory 830 arbitration error, Tx FIFO underflow, driver stopped it to reconfigure, 831 etc.). Modern LANCE variants always reload their ring-buffer 832 configuration when restarted, so we must reinitialize our ring 833 context before restarting. As part of this reinitialization, 834 find all packets still on the Tx ring and pretend that they had been 835 sent (in effect, drop the packets on the floor) - the higher-level 836 protocols will time out and retransmit. It'd be better to shuffle 837 these skbs to a temp list and then actually re-Tx them after 838 restarting the chip, but I'm too lazy to do so right now. dplatt@3do.com 839*/ 840 841static void 842lance_purge_ring(struct net_device *dev) 843{ 844 struct lance_private *lp = dev->ml_priv; 845 int i; 846 847 /* Free all the skbuffs in the Rx and Tx queues. */ 848 for (i = 0; i < RX_RING_SIZE; i++) { 849 struct sk_buff *skb = lp->rx_skbuff[i]; 850 lp->rx_skbuff[i] = NULL; 851 lp->rx_ring[i].base = 0; /* Not owned by LANCE chip. */ 852 if (skb) 853 dev_kfree_skb_any(skb); 854 } 855 for (i = 0; i < TX_RING_SIZE; i++) { 856 if (lp->tx_skbuff[i]) { 857 dev_kfree_skb_any(lp->tx_skbuff[i]); 858 lp->tx_skbuff[i] = NULL; 859 } 860 } 861} 862 863 864/* Initialize the LANCE Rx and Tx rings. */ 865static void 866lance_init_ring(struct net_device *dev, gfp_t gfp) 867{ 868 struct lance_private *lp = dev->ml_priv; 869 int i; 870 871 lp->cur_rx = lp->cur_tx = 0; 872 lp->dirty_rx = lp->dirty_tx = 0; 873 874 for (i = 0; i < RX_RING_SIZE; i++) { 875 struct sk_buff *skb; 876 void *rx_buff; 877 878 skb = alloc_skb(PKT_BUF_SZ, GFP_DMA | gfp); 879 lp->rx_skbuff[i] = skb; 880 if (skb) 881 rx_buff = skb->data; 882 else 883 rx_buff = kmalloc(PKT_BUF_SZ, GFP_DMA | gfp); 884 if (!rx_buff) 885 lp->rx_ring[i].base = 0; 886 else 887 lp->rx_ring[i].base = (u32)isa_virt_to_bus(rx_buff) | 0x80000000; 888 lp->rx_ring[i].buf_length = -PKT_BUF_SZ; 889 } 890 /* The Tx buffer address is filled in as needed, but we do need to clear 891 the upper ownership bit. */ 892 for (i = 0; i < TX_RING_SIZE; i++) { 893 lp->tx_skbuff[i] = NULL; 894 lp->tx_ring[i].base = 0; 895 } 896 897 lp->init_block.mode = 0x0000; 898 for (i = 0; i < 6; i++) 899 lp->init_block.phys_addr[i] = dev->dev_addr[i]; 900 lp->init_block.filter[0] = 0x00000000; 901 lp->init_block.filter[1] = 0x00000000; 902 lp->init_block.rx_ring = ((u32)isa_virt_to_bus(lp->rx_ring) & 0xffffff) | RX_RING_LEN_BITS; 903 lp->init_block.tx_ring = ((u32)isa_virt_to_bus(lp->tx_ring) & 0xffffff) | TX_RING_LEN_BITS; 904} 905 906static void 907lance_restart(struct net_device *dev, unsigned int csr0_bits, int must_reinit) 908{ 909 struct lance_private *lp = dev->ml_priv; 910 911 if (must_reinit || 912 (chip_table[lp->chip_version].flags & LANCE_MUST_REINIT_RING)) { 913 lance_purge_ring(dev); 914 lance_init_ring(dev, GFP_ATOMIC); 915 } 916 outw(0x0000, dev->base_addr + LANCE_ADDR); 917 outw(csr0_bits, dev->base_addr + LANCE_DATA); 918} 919 920 921static void lance_tx_timeout (struct net_device *dev, unsigned int txqueue) 922{ 923 struct lance_private *lp = (struct lance_private *) dev->ml_priv; 924 int ioaddr = dev->base_addr; 925 926 outw (0, ioaddr + LANCE_ADDR); 927 printk ("%s: transmit timed out, status %4.4x, resetting.\n", 928 dev->name, inw (ioaddr + LANCE_DATA)); 929 outw (0x0004, ioaddr + LANCE_DATA); 930 dev->stats.tx_errors++; 931#ifndef final_version 932 if (lance_debug > 3) { 933 int i; 934 printk (" Ring data dump: dirty_tx %d cur_tx %d%s cur_rx %d.", 935 lp->dirty_tx, lp->cur_tx, netif_queue_stopped(dev) ? " (full)" : "", 936 lp->cur_rx); 937 for (i = 0; i < RX_RING_SIZE; i++) 938 printk ("%s %08x %04x %04x", i & 0x3 ? "" : "\n ", 939 lp->rx_ring[i].base, -lp->rx_ring[i].buf_length, 940 lp->rx_ring[i].msg_length); 941 for (i = 0; i < TX_RING_SIZE; i++) 942 printk ("%s %08x %04x %04x", i & 0x3 ? "" : "\n ", 943 lp->tx_ring[i].base, -lp->tx_ring[i].length, 944 lp->tx_ring[i].misc); 945 printk ("\n"); 946 } 947#endif 948 lance_restart (dev, 0x0043, 1); 949 950 netif_trans_update(dev); /* prevent tx timeout */ 951 netif_wake_queue (dev); 952} 953 954 955static netdev_tx_t lance_start_xmit(struct sk_buff *skb, 956 struct net_device *dev) 957{ 958 struct lance_private *lp = dev->ml_priv; 959 int ioaddr = dev->base_addr; 960 int entry; 961 unsigned long flags; 962 963 spin_lock_irqsave(&lp->devlock, flags); 964 965 if (lance_debug > 3) { 966 outw(0x0000, ioaddr+LANCE_ADDR); 967 printk("%s: lance_start_xmit() called, csr0 %4.4x.\n", dev->name, 968 inw(ioaddr+LANCE_DATA)); 969 outw(0x0000, ioaddr+LANCE_DATA); 970 } 971 972 /* Fill in a Tx ring entry */ 973 974 /* Mask to ring buffer boundary. */ 975 entry = lp->cur_tx & TX_RING_MOD_MASK; 976 977 /* Caution: the write order is important here, set the base address 978 with the "ownership" bits last. */ 979 980 /* The old LANCE chips doesn't automatically pad buffers to min. size. */ 981 if (chip_table[lp->chip_version].flags & LANCE_MUST_PAD) { 982 if (skb->len < ETH_ZLEN) { 983 if (skb_padto(skb, ETH_ZLEN)) 984 goto out; 985 lp->tx_ring[entry].length = -ETH_ZLEN; 986 } 987 else 988 lp->tx_ring[entry].length = -skb->len; 989 } else 990 lp->tx_ring[entry].length = -skb->len; 991 992 lp->tx_ring[entry].misc = 0x0000; 993 994 dev->stats.tx_bytes += skb->len; 995 996 /* If any part of this buffer is >16M we must copy it to a low-memory 997 buffer. */ 998 if ((u32)isa_virt_to_bus(skb->data) + skb->len > 0x01000000) { 999 if (lance_debug > 5) 1000 printk("%s: bouncing a high-memory packet (%#x).\n", 1001 dev->name, (u32)isa_virt_to_bus(skb->data)); 1002 skb_copy_from_linear_data(skb, &lp->tx_bounce_buffs[entry], skb->len); 1003 lp->tx_ring[entry].base = 1004 ((u32)isa_virt_to_bus((lp->tx_bounce_buffs + entry)) & 0xffffff) | 0x83000000; 1005 dev_consume_skb_irq(skb); 1006 } else { 1007 lp->tx_skbuff[entry] = skb; 1008 lp->tx_ring[entry].base = ((u32)isa_virt_to_bus(skb->data) & 0xffffff) | 0x83000000; 1009 } 1010 lp->cur_tx++; 1011 1012 /* Trigger an immediate send poll. */ 1013 outw(0x0000, ioaddr+LANCE_ADDR); 1014 outw(0x0048, ioaddr+LANCE_DATA); 1015 1016 if ((lp->cur_tx - lp->dirty_tx) >= TX_RING_SIZE) 1017 netif_stop_queue(dev); 1018 1019out: 1020 spin_unlock_irqrestore(&lp->devlock, flags); 1021 return NETDEV_TX_OK; 1022} 1023 1024/* The LANCE interrupt handler. */ 1025static irqreturn_t lance_interrupt(int irq, void *dev_id) 1026{ 1027 struct net_device *dev = dev_id; 1028 struct lance_private *lp; 1029 int csr0, ioaddr, boguscnt=10; 1030 int must_restart; 1031 1032 ioaddr = dev->base_addr; 1033 lp = dev->ml_priv; 1034 1035 spin_lock (&lp->devlock); 1036 1037 outw(0x00, dev->base_addr + LANCE_ADDR); 1038 while ((csr0 = inw(dev->base_addr + LANCE_DATA)) & 0x8600 && 1039 --boguscnt >= 0) { 1040 /* Acknowledge all of the current interrupt sources ASAP. */ 1041 outw(csr0 & ~0x004f, dev->base_addr + LANCE_DATA); 1042 1043 must_restart = 0; 1044 1045 if (lance_debug > 5) 1046 printk("%s: interrupt csr0=%#2.2x new csr=%#2.2x.\n", 1047 dev->name, csr0, inw(dev->base_addr + LANCE_DATA)); 1048 1049 if (csr0 & 0x0400) /* Rx interrupt */ 1050 lance_rx(dev); 1051 1052 if (csr0 & 0x0200) { /* Tx-done interrupt */ 1053 int dirty_tx = lp->dirty_tx; 1054 1055 while (dirty_tx < lp->cur_tx) { 1056 int entry = dirty_tx & TX_RING_MOD_MASK; 1057 int status = lp->tx_ring[entry].base; 1058 1059 if (status < 0) 1060 break; /* It still hasn't been Txed */ 1061 1062 lp->tx_ring[entry].base = 0; 1063 1064 if (status & 0x40000000) { 1065 /* There was an major error, log it. */ 1066 int err_status = lp->tx_ring[entry].misc; 1067 dev->stats.tx_errors++; 1068 if (err_status & 0x0400) 1069 dev->stats.tx_aborted_errors++; 1070 if (err_status & 0x0800) 1071 dev->stats.tx_carrier_errors++; 1072 if (err_status & 0x1000) 1073 dev->stats.tx_window_errors++; 1074 if (err_status & 0x4000) { 1075 /* Ackk! On FIFO errors the Tx unit is turned off! */ 1076 dev->stats.tx_fifo_errors++; 1077 /* Remove this verbosity later! */ 1078 printk("%s: Tx FIFO error! Status %4.4x.\n", 1079 dev->name, csr0); 1080 /* Restart the chip. */ 1081 must_restart = 1; 1082 } 1083 } else { 1084 if (status & 0x18000000) 1085 dev->stats.collisions++; 1086 dev->stats.tx_packets++; 1087 } 1088 1089 /* We must free the original skb if it's not a data-only copy 1090 in the bounce buffer. */ 1091 if (lp->tx_skbuff[entry]) { 1092 dev_consume_skb_irq(lp->tx_skbuff[entry]); 1093 lp->tx_skbuff[entry] = NULL; 1094 } 1095 dirty_tx++; 1096 } 1097 1098#ifndef final_version 1099 if (lp->cur_tx - dirty_tx >= TX_RING_SIZE) { 1100 printk("out-of-sync dirty pointer, %d vs. %d, full=%s.\n", 1101 dirty_tx, lp->cur_tx, 1102 netif_queue_stopped(dev) ? "yes" : "no"); 1103 dirty_tx += TX_RING_SIZE; 1104 } 1105#endif 1106 1107 /* if the ring is no longer full, accept more packets */ 1108 if (netif_queue_stopped(dev) && 1109 dirty_tx > lp->cur_tx - TX_RING_SIZE + 2) 1110 netif_wake_queue (dev); 1111 1112 lp->dirty_tx = dirty_tx; 1113 } 1114 1115 /* Log misc errors. */ 1116 if (csr0 & 0x4000) 1117 dev->stats.tx_errors++; /* Tx babble. */ 1118 if (csr0 & 0x1000) 1119 dev->stats.rx_errors++; /* Missed a Rx frame. */ 1120 if (csr0 & 0x0800) { 1121 printk("%s: Bus master arbitration failure, status %4.4x.\n", 1122 dev->name, csr0); 1123 /* Restart the chip. */ 1124 must_restart = 1; 1125 } 1126 1127 if (must_restart) { 1128 /* stop the chip to clear the error condition, then restart */ 1129 outw(0x0000, dev->base_addr + LANCE_ADDR); 1130 outw(0x0004, dev->base_addr + LANCE_DATA); 1131 lance_restart(dev, 0x0002, 0); 1132 } 1133 } 1134 1135 /* Clear any other interrupt, and set interrupt enable. */ 1136 outw(0x0000, dev->base_addr + LANCE_ADDR); 1137 outw(0x7940, dev->base_addr + LANCE_DATA); 1138 1139 if (lance_debug > 4) 1140 printk("%s: exiting interrupt, csr%d=%#4.4x.\n", 1141 dev->name, inw(ioaddr + LANCE_ADDR), 1142 inw(dev->base_addr + LANCE_DATA)); 1143 1144 spin_unlock (&lp->devlock); 1145 return IRQ_HANDLED; 1146} 1147 1148static int 1149lance_rx(struct net_device *dev) 1150{ 1151 struct lance_private *lp = dev->ml_priv; 1152 int entry = lp->cur_rx & RX_RING_MOD_MASK; 1153 int i; 1154 1155 /* If we own the next entry, it's a new packet. Send it up. */ 1156 while (lp->rx_ring[entry].base >= 0) { 1157 int status = lp->rx_ring[entry].base >> 24; 1158 1159 if (status != 0x03) { /* There was an error. */ 1160 /* There is a tricky error noted by John Murphy, 1161 <murf@perftech.com> to Russ Nelson: Even with full-sized 1162 buffers it's possible for a jabber packet to use two 1163 buffers, with only the last correctly noting the error. */ 1164 if (status & 0x01) /* Only count a general error at the */ 1165 dev->stats.rx_errors++; /* end of a packet.*/ 1166 if (status & 0x20) 1167 dev->stats.rx_frame_errors++; 1168 if (status & 0x10) 1169 dev->stats.rx_over_errors++; 1170 if (status & 0x08) 1171 dev->stats.rx_crc_errors++; 1172 if (status & 0x04) 1173 dev->stats.rx_fifo_errors++; 1174 lp->rx_ring[entry].base &= 0x03ffffff; 1175 } 1176 else 1177 { 1178 /* Malloc up new buffer, compatible with net3. */ 1179 short pkt_len = (lp->rx_ring[entry].msg_length & 0xfff)-4; 1180 struct sk_buff *skb; 1181 1182 if(pkt_len<60) 1183 { 1184 printk("%s: Runt packet!\n",dev->name); 1185 dev->stats.rx_errors++; 1186 } 1187 else 1188 { 1189 skb = dev_alloc_skb(pkt_len+2); 1190 if (!skb) 1191 { 1192 printk("%s: Memory squeeze, deferring packet.\n", dev->name); 1193 for (i=0; i < RX_RING_SIZE; i++) 1194 if (lp->rx_ring[(entry+i) & RX_RING_MOD_MASK].base < 0) 1195 break; 1196 1197 if (i > RX_RING_SIZE -2) 1198 { 1199 dev->stats.rx_dropped++; 1200 lp->rx_ring[entry].base |= 0x80000000; 1201 lp->cur_rx++; 1202 } 1203 break; 1204 } 1205 skb_reserve(skb,2); /* 16 byte align */ 1206 skb_put(skb,pkt_len); /* Make room */ 1207 skb_copy_to_linear_data(skb, 1208 (unsigned char *)isa_bus_to_virt((lp->rx_ring[entry].base & 0x00ffffff)), 1209 pkt_len); 1210 skb->protocol=eth_type_trans(skb,dev); 1211 netif_rx(skb); 1212 dev->stats.rx_packets++; 1213 dev->stats.rx_bytes += pkt_len; 1214 } 1215 } 1216 /* The docs say that the buffer length isn't touched, but Andrew Boyd 1217 of QNX reports that some revs of the 79C965 clear it. */ 1218 lp->rx_ring[entry].buf_length = -PKT_BUF_SZ; 1219 lp->rx_ring[entry].base |= 0x80000000; 1220 entry = (++lp->cur_rx) & RX_RING_MOD_MASK; 1221 } 1222 1223 /* We should check that at least two ring entries are free. If not, 1224 we should free one and mark stats->rx_dropped++. */ 1225 1226 return 0; 1227} 1228 1229static int 1230lance_close(struct net_device *dev) 1231{ 1232 int ioaddr = dev->base_addr; 1233 struct lance_private *lp = dev->ml_priv; 1234 1235 netif_stop_queue (dev); 1236 1237 if (chip_table[lp->chip_version].flags & LANCE_HAS_MISSED_FRAME) { 1238 outw(112, ioaddr+LANCE_ADDR); 1239 dev->stats.rx_missed_errors = inw(ioaddr+LANCE_DATA); 1240 } 1241 outw(0, ioaddr+LANCE_ADDR); 1242 1243 if (lance_debug > 1) 1244 printk("%s: Shutting down ethercard, status was %2.2x.\n", 1245 dev->name, inw(ioaddr+LANCE_DATA)); 1246 1247 /* We stop the LANCE here -- it occasionally polls 1248 memory if we don't. */ 1249 outw(0x0004, ioaddr+LANCE_DATA); 1250 1251 if (dev->dma != 4) 1252 { 1253 unsigned long flags=claim_dma_lock(); 1254 disable_dma(dev->dma); 1255 release_dma_lock(flags); 1256 } 1257 free_irq(dev->irq, dev); 1258 1259 lance_purge_ring(dev); 1260 1261 return 0; 1262} 1263 1264static struct net_device_stats *lance_get_stats(struct net_device *dev) 1265{ 1266 struct lance_private *lp = dev->ml_priv; 1267 1268 if (chip_table[lp->chip_version].flags & LANCE_HAS_MISSED_FRAME) { 1269 short ioaddr = dev->base_addr; 1270 short saved_addr; 1271 unsigned long flags; 1272 1273 spin_lock_irqsave(&lp->devlock, flags); 1274 saved_addr = inw(ioaddr+LANCE_ADDR); 1275 outw(112, ioaddr+LANCE_ADDR); 1276 dev->stats.rx_missed_errors = inw(ioaddr+LANCE_DATA); 1277 outw(saved_addr, ioaddr+LANCE_ADDR); 1278 spin_unlock_irqrestore(&lp->devlock, flags); 1279 } 1280 1281 return &dev->stats; 1282} 1283 1284/* Set or clear the multicast filter for this adaptor. 1285 */ 1286 1287static void set_multicast_list(struct net_device *dev) 1288{ 1289 short ioaddr = dev->base_addr; 1290 1291 outw(0, ioaddr+LANCE_ADDR); 1292 outw(0x0004, ioaddr+LANCE_DATA); /* Temporarily stop the lance. */ 1293 1294 if (dev->flags&IFF_PROMISC) { 1295 outw(15, ioaddr+LANCE_ADDR); 1296 outw(0x8000, ioaddr+LANCE_DATA); /* Set promiscuous mode */ 1297 } else { 1298 short multicast_table[4]; 1299 int i; 1300 int num_addrs=netdev_mc_count(dev); 1301 if(dev->flags&IFF_ALLMULTI) 1302 num_addrs=1; 1303 /* FIXIT: We don't use the multicast table, but rely on upper-layer filtering. */ 1304 memset(multicast_table, (num_addrs == 0) ? 0 : -1, sizeof(multicast_table)); 1305 for (i = 0; i < 4; i++) { 1306 outw(8 + i, ioaddr+LANCE_ADDR); 1307 outw(multicast_table[i], ioaddr+LANCE_DATA); 1308 } 1309 outw(15, ioaddr+LANCE_ADDR); 1310 outw(0x0000, ioaddr+LANCE_DATA); /* Unset promiscuous mode */ 1311 } 1312 1313 lance_restart(dev, 0x0142, 0); /* Resume normal operation */ 1314 1315} 1316 1317