1/* 2 * Linux ARCnet driver - COM90xx chipset (memory-mapped buffers) 3 * 4 * Written 1994-1999 by Avery Pennarun. 5 * Written 1999 by Martin Mares <mj@ucw.cz>. 6 * Derived from skeleton.c by Donald Becker. 7 * 8 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) 9 * for sponsoring the further development of this driver. 10 * 11 * ********************** 12 * 13 * The original copyright of skeleton.c was as follows: 14 * 15 * skeleton.c Written 1993 by Donald Becker. 16 * Copyright 1993 United States Government as represented by the 17 * Director, National Security Agency. This software may only be used 18 * and distributed according to the terms of the GNU General Public License as 19 * modified by SRC, incorporated herein by reference. 20 * 21 * ********************** 22 * 23 * For more details, see drivers/net/arcnet.c 24 * 25 * ********************** 26 */ 27 28#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt 29 30#include <linux/module.h> 31#include <linux/moduleparam.h> 32#include <linux/init.h> 33#include <linux/interrupt.h> 34#include <linux/ioport.h> 35#include <linux/delay.h> 36#include <linux/netdevice.h> 37#include <linux/slab.h> 38#include <linux/io.h> 39 40#include "arcdevice.h" 41#include "com9026.h" 42 43/* Define this to speed up the autoprobe by assuming if only one io port and 44 * shmem are left in the list at Stage 5, they must correspond to each 45 * other. 46 * 47 * This is undefined by default because it might not always be true, and the 48 * extra check makes the autoprobe even more careful. Speed demons can turn 49 * it on - I think it should be fine if you only have one ARCnet card 50 * installed. 51 * 52 * If no ARCnet cards are installed, this delay never happens anyway and thus 53 * the option has no effect. 54 */ 55#undef FAST_PROBE 56 57/* Internal function declarations */ 58static int com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem *); 59static void com90xx_command(struct net_device *dev, int command); 60static int com90xx_status(struct net_device *dev); 61static void com90xx_setmask(struct net_device *dev, int mask); 62static int com90xx_reset(struct net_device *dev, int really_reset); 63static void com90xx_copy_to_card(struct net_device *dev, int bufnum, int offset, 64 void *buf, int count); 65static void com90xx_copy_from_card(struct net_device *dev, int bufnum, 66 int offset, void *buf, int count); 67 68/* Known ARCnet cards */ 69 70static struct net_device *cards[16]; 71static int numcards; 72 73/* Handy defines for ARCnet specific stuff */ 74 75/* The number of low I/O ports used by the card */ 76#define ARCNET_TOTAL_SIZE 16 77 78/* Amount of I/O memory used by the card */ 79#define BUFFER_SIZE (512) 80#define MIRROR_SIZE (BUFFER_SIZE * 4) 81 82static int com90xx_skip_probe __initdata = 0; 83 84/* Module parameters */ 85 86static int io; /* use the insmod io= irq= shmem= options */ 87static int irq; 88static int shmem; 89static char device[9]; /* use eg. device=arc1 to change name */ 90 91module_param_hw(io, int, ioport, 0); 92module_param_hw(irq, int, irq, 0); 93module_param(shmem, int, 0); 94module_param_string(device, device, sizeof(device), 0); 95 96static void __init com90xx_probe(void) 97{ 98 int count, status, ioaddr, numprint, airq, openparen = 0; 99 unsigned long airqmask; 100 int ports[(0x3f0 - 0x200) / 16 + 1] = { 0 }; 101 unsigned long *shmems; 102 void __iomem **iomem; 103 int numports, numshmems, *port; 104 u_long *p; 105 int index; 106 107 if (!io && !irq && !shmem && !*device && com90xx_skip_probe) 108 return; 109 110 shmems = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(unsigned long), 111 GFP_KERNEL); 112 if (!shmems) 113 return; 114 iomem = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(void __iomem *), 115 GFP_KERNEL); 116 if (!iomem) { 117 kfree(shmems); 118 return; 119 } 120 121 if (BUGLVL(D_NORMAL)) 122 pr_info("%s\n", "COM90xx chipset support"); 123 124 /* set up the arrays where we'll store the possible probe addresses */ 125 numports = numshmems = 0; 126 if (io) 127 ports[numports++] = io; 128 else 129 for (count = 0x200; count <= 0x3f0; count += 16) 130 ports[numports++] = count; 131 if (shmem) 132 shmems[numshmems++] = shmem; 133 else 134 for (count = 0xA0000; count <= 0xFF800; count += 2048) 135 shmems[numshmems++] = count; 136 137 /* Stage 1: abandon any reserved ports, or ones with status==0xFF 138 * (empty), and reset any others by reading the reset port. 139 */ 140 numprint = -1; 141 for (port = &ports[0]; port - ports < numports; port++) { 142 numprint++; 143 numprint %= 8; 144 if (!numprint) { 145 arc_cont(D_INIT, "\n"); 146 arc_cont(D_INIT, "S1: "); 147 } 148 arc_cont(D_INIT, "%Xh ", *port); 149 150 ioaddr = *port; 151 152 if (!request_region(*port, ARCNET_TOTAL_SIZE, 153 "arcnet (90xx)")) { 154 arc_cont(D_INIT_REASONS, "(request_region)\n"); 155 arc_cont(D_INIT_REASONS, "S1: "); 156 if (BUGLVL(D_INIT_REASONS)) 157 numprint = 0; 158 *port-- = ports[--numports]; 159 continue; 160 } 161 if (arcnet_inb(ioaddr, COM9026_REG_R_STATUS) == 0xFF) { 162 arc_cont(D_INIT_REASONS, "(empty)\n"); 163 arc_cont(D_INIT_REASONS, "S1: "); 164 if (BUGLVL(D_INIT_REASONS)) 165 numprint = 0; 166 release_region(*port, ARCNET_TOTAL_SIZE); 167 *port-- = ports[--numports]; 168 continue; 169 } 170 /* begin resetting card */ 171 arcnet_inb(ioaddr, COM9026_REG_R_RESET); 172 173 arc_cont(D_INIT_REASONS, "\n"); 174 arc_cont(D_INIT_REASONS, "S1: "); 175 if (BUGLVL(D_INIT_REASONS)) 176 numprint = 0; 177 } 178 arc_cont(D_INIT, "\n"); 179 180 if (!numports) { 181 arc_cont(D_NORMAL, "S1: No ARCnet cards found.\n"); 182 kfree(shmems); 183 kfree(iomem); 184 return; 185 } 186 /* Stage 2: we have now reset any possible ARCnet cards, so we can't 187 * do anything until they finish. If D_INIT, print the list of 188 * cards that are left. 189 */ 190 numprint = -1; 191 for (port = &ports[0]; port < ports + numports; port++) { 192 numprint++; 193 numprint %= 8; 194 if (!numprint) { 195 arc_cont(D_INIT, "\n"); 196 arc_cont(D_INIT, "S2: "); 197 } 198 arc_cont(D_INIT, "%Xh ", *port); 199 } 200 arc_cont(D_INIT, "\n"); 201 mdelay(RESETtime); 202 203 /* Stage 3: abandon any shmem addresses that don't have the signature 204 * 0xD1 byte in the right place, or are read-only. 205 */ 206 numprint = -1; 207 for (index = 0, p = &shmems[0]; index < numshmems; p++, index++) { 208 void __iomem *base; 209 210 numprint++; 211 numprint %= 8; 212 if (!numprint) { 213 arc_cont(D_INIT, "\n"); 214 arc_cont(D_INIT, "S3: "); 215 } 216 arc_cont(D_INIT, "%lXh ", *p); 217 218 if (!request_mem_region(*p, MIRROR_SIZE, "arcnet (90xx)")) { 219 arc_cont(D_INIT_REASONS, "(request_mem_region)\n"); 220 arc_cont(D_INIT_REASONS, "Stage 3: "); 221 if (BUGLVL(D_INIT_REASONS)) 222 numprint = 0; 223 goto out; 224 } 225 base = ioremap(*p, MIRROR_SIZE); 226 if (!base) { 227 arc_cont(D_INIT_REASONS, "(ioremap)\n"); 228 arc_cont(D_INIT_REASONS, "Stage 3: "); 229 if (BUGLVL(D_INIT_REASONS)) 230 numprint = 0; 231 goto out1; 232 } 233 if (arcnet_readb(base, COM9026_REG_R_STATUS) != TESTvalue) { 234 arc_cont(D_INIT_REASONS, "(%02Xh != %02Xh)\n", 235 arcnet_readb(base, COM9026_REG_R_STATUS), 236 TESTvalue); 237 arc_cont(D_INIT_REASONS, "S3: "); 238 if (BUGLVL(D_INIT_REASONS)) 239 numprint = 0; 240 goto out2; 241 } 242 /* By writing 0x42 to the TESTvalue location, we also make 243 * sure no "mirror" shmem areas show up - if they occur 244 * in another pass through this loop, they will be discarded 245 * because *cptr != TESTvalue. 246 */ 247 arcnet_writeb(0x42, base, COM9026_REG_W_INTMASK); 248 if (arcnet_readb(base, COM9026_REG_R_STATUS) != 0x42) { 249 arc_cont(D_INIT_REASONS, "(read only)\n"); 250 arc_cont(D_INIT_REASONS, "S3: "); 251 goto out2; 252 } 253 arc_cont(D_INIT_REASONS, "\n"); 254 arc_cont(D_INIT_REASONS, "S3: "); 255 if (BUGLVL(D_INIT_REASONS)) 256 numprint = 0; 257 iomem[index] = base; 258 continue; 259 out2: 260 iounmap(base); 261 out1: 262 release_mem_region(*p, MIRROR_SIZE); 263 out: 264 *p-- = shmems[--numshmems]; 265 index--; 266 } 267 arc_cont(D_INIT, "\n"); 268 269 if (!numshmems) { 270 arc_cont(D_NORMAL, "S3: No ARCnet cards found.\n"); 271 for (port = &ports[0]; port < ports + numports; port++) 272 release_region(*port, ARCNET_TOTAL_SIZE); 273 kfree(shmems); 274 kfree(iomem); 275 return; 276 } 277 /* Stage 4: something of a dummy, to report the shmems that are 278 * still possible after stage 3. 279 */ 280 numprint = -1; 281 for (p = &shmems[0]; p < shmems + numshmems; p++) { 282 numprint++; 283 numprint %= 8; 284 if (!numprint) { 285 arc_cont(D_INIT, "\n"); 286 arc_cont(D_INIT, "S4: "); 287 } 288 arc_cont(D_INIT, "%lXh ", *p); 289 } 290 arc_cont(D_INIT, "\n"); 291 292 /* Stage 5: for any ports that have the correct status, can disable 293 * the RESET flag, and (if no irq is given) generate an autoirq, 294 * register an ARCnet device. 295 * 296 * Currently, we can only register one device per probe, so quit 297 * after the first one is found. 298 */ 299 numprint = -1; 300 for (port = &ports[0]; port < ports + numports; port++) { 301 int found = 0; 302 303 numprint++; 304 numprint %= 8; 305 if (!numprint) { 306 arc_cont(D_INIT, "\n"); 307 arc_cont(D_INIT, "S5: "); 308 } 309 arc_cont(D_INIT, "%Xh ", *port); 310 311 ioaddr = *port; 312 status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS); 313 314 if ((status & 0x9D) 315 != (NORXflag | RECONflag | TXFREEflag | RESETflag)) { 316 arc_cont(D_INIT_REASONS, "(status=%Xh)\n", status); 317 arc_cont(D_INIT_REASONS, "S5: "); 318 if (BUGLVL(D_INIT_REASONS)) 319 numprint = 0; 320 release_region(*port, ARCNET_TOTAL_SIZE); 321 *port-- = ports[--numports]; 322 continue; 323 } 324 arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, 325 ioaddr, COM9026_REG_W_COMMAND); 326 status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS); 327 if (status & RESETflag) { 328 arc_cont(D_INIT_REASONS, " (eternal reset, status=%Xh)\n", 329 status); 330 arc_cont(D_INIT_REASONS, "S5: "); 331 if (BUGLVL(D_INIT_REASONS)) 332 numprint = 0; 333 release_region(*port, ARCNET_TOTAL_SIZE); 334 *port-- = ports[--numports]; 335 continue; 336 } 337 /* skip this completely if an IRQ was given, because maybe 338 * we're on a machine that locks during autoirq! 339 */ 340 if (!irq) { 341 /* if we do this, we're sure to get an IRQ since the 342 * card has just reset and the NORXflag is on until 343 * we tell it to start receiving. 344 */ 345 airqmask = probe_irq_on(); 346 arcnet_outb(NORXflag, ioaddr, COM9026_REG_W_INTMASK); 347 udelay(1); 348 arcnet_outb(0, ioaddr, COM9026_REG_W_INTMASK); 349 airq = probe_irq_off(airqmask); 350 351 if (airq <= 0) { 352 arc_cont(D_INIT_REASONS, "(airq=%d)\n", airq); 353 arc_cont(D_INIT_REASONS, "S5: "); 354 if (BUGLVL(D_INIT_REASONS)) 355 numprint = 0; 356 release_region(*port, ARCNET_TOTAL_SIZE); 357 *port-- = ports[--numports]; 358 continue; 359 } 360 } else { 361 airq = irq; 362 } 363 364 arc_cont(D_INIT, "(%d,", airq); 365 openparen = 1; 366 367 /* Everything seems okay. But which shmem, if any, puts 368 * back its signature byte when the card is reset? 369 * 370 * If there are multiple cards installed, there might be 371 * multiple shmems still in the list. 372 */ 373#ifdef FAST_PROBE 374 if (numports > 1 || numshmems > 1) { 375 arcnet_inb(ioaddr, COM9026_REG_R_RESET); 376 mdelay(RESETtime); 377 } else { 378 /* just one shmem and port, assume they match */ 379 arcnet_writeb(TESTvalue, iomem[0], 380 COM9026_REG_W_INTMASK); 381 } 382#else 383 arcnet_inb(ioaddr, COM9026_REG_R_RESET); 384 mdelay(RESETtime); 385#endif 386 387 for (index = 0; index < numshmems; index++) { 388 u_long ptr = shmems[index]; 389 void __iomem *base = iomem[index]; 390 391 if (arcnet_readb(base, COM9026_REG_R_STATUS) == TESTvalue) { /* found one */ 392 arc_cont(D_INIT, "%lXh)\n", *p); 393 openparen = 0; 394 395 /* register the card */ 396 if (com90xx_found(*port, airq, ptr, base) == 0) 397 found = 1; 398 numprint = -1; 399 400 /* remove shmem from the list */ 401 shmems[index] = shmems[--numshmems]; 402 iomem[index] = iomem[numshmems]; 403 break; /* go to the next I/O port */ 404 } else { 405 arc_cont(D_INIT_REASONS, "%Xh-", 406 arcnet_readb(base, COM9026_REG_R_STATUS)); 407 } 408 } 409 410 if (openparen) { 411 if (BUGLVL(D_INIT)) 412 pr_cont("no matching shmem)\n"); 413 if (BUGLVL(D_INIT_REASONS)) { 414 pr_cont("S5: "); 415 numprint = 0; 416 } 417 } 418 if (!found) 419 release_region(*port, ARCNET_TOTAL_SIZE); 420 *port-- = ports[--numports]; 421 } 422 423 if (BUGLVL(D_INIT_REASONS)) 424 pr_cont("\n"); 425 426 /* Now put back TESTvalue on all leftover shmems. */ 427 for (index = 0; index < numshmems; index++) { 428 arcnet_writeb(TESTvalue, iomem[index], COM9026_REG_W_INTMASK); 429 iounmap(iomem[index]); 430 release_mem_region(shmems[index], MIRROR_SIZE); 431 } 432 kfree(shmems); 433 kfree(iomem); 434} 435 436static int __init check_mirror(unsigned long addr, size_t size) 437{ 438 void __iomem *p; 439 int res = -1; 440 441 if (!request_mem_region(addr, size, "arcnet (90xx)")) 442 return -1; 443 444 p = ioremap(addr, size); 445 if (p) { 446 if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue) 447 res = 1; 448 else 449 res = 0; 450 iounmap(p); 451 } 452 453 release_mem_region(addr, size); 454 return res; 455} 456 457/* Set up the struct net_device associated with this card. Called after 458 * probing succeeds. 459 */ 460static int __init com90xx_found(int ioaddr, int airq, u_long shmem, 461 void __iomem *p) 462{ 463 struct net_device *dev = NULL; 464 struct arcnet_local *lp; 465 u_long first_mirror, last_mirror; 466 int mirror_size; 467 468 /* allocate struct net_device */ 469 dev = alloc_arcdev(device); 470 if (!dev) { 471 arc_cont(D_NORMAL, "com90xx: Can't allocate device!\n"); 472 iounmap(p); 473 release_mem_region(shmem, MIRROR_SIZE); 474 return -ENOMEM; 475 } 476 lp = netdev_priv(dev); 477 /* find the real shared memory start/end points, including mirrors */ 478 479 /* guess the actual size of one "memory mirror" - the number of 480 * bytes between copies of the shared memory. On most cards, it's 481 * 2k (or there are no mirrors at all) but on some, it's 4k. 482 */ 483 mirror_size = MIRROR_SIZE; 484 if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue && 485 check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 && 486 check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1) 487 mirror_size = 2 * MIRROR_SIZE; 488 489 first_mirror = shmem - mirror_size; 490 while (check_mirror(first_mirror, mirror_size) == 1) 491 first_mirror -= mirror_size; 492 first_mirror += mirror_size; 493 494 last_mirror = shmem + mirror_size; 495 while (check_mirror(last_mirror, mirror_size) == 1) 496 last_mirror += mirror_size; 497 last_mirror -= mirror_size; 498 499 dev->mem_start = first_mirror; 500 dev->mem_end = last_mirror + MIRROR_SIZE - 1; 501 502 iounmap(p); 503 release_mem_region(shmem, MIRROR_SIZE); 504 505 if (!request_mem_region(dev->mem_start, 506 dev->mem_end - dev->mem_start + 1, 507 "arcnet (90xx)")) 508 goto err_free_dev; 509 510 /* reserve the irq */ 511 if (request_irq(airq, arcnet_interrupt, 0, "arcnet (90xx)", dev)) { 512 arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", airq); 513 goto err_release_mem; 514 } 515 dev->irq = airq; 516 517 /* Initialize the rest of the device structure. */ 518 lp->card_name = "COM90xx"; 519 lp->hw.command = com90xx_command; 520 lp->hw.status = com90xx_status; 521 lp->hw.intmask = com90xx_setmask; 522 lp->hw.reset = com90xx_reset; 523 lp->hw.owner = THIS_MODULE; 524 lp->hw.copy_to_card = com90xx_copy_to_card; 525 lp->hw.copy_from_card = com90xx_copy_from_card; 526 lp->mem_start = ioremap(dev->mem_start, 527 dev->mem_end - dev->mem_start + 1); 528 if (!lp->mem_start) { 529 arc_printk(D_NORMAL, dev, "Can't remap device memory!\n"); 530 goto err_free_irq; 531 } 532 533 /* get and check the station ID from offset 1 in shmem */ 534 arcnet_set_addr(dev, arcnet_readb(lp->mem_start, 535 COM9026_REG_R_STATION)); 536 537 dev->base_addr = ioaddr; 538 539 arc_printk(D_NORMAL, dev, "COM90xx station %02Xh found at %03lXh, IRQ %d, ShMem %lXh (%ld*%xh).\n", 540 dev->dev_addr[0], 541 dev->base_addr, dev->irq, dev->mem_start, 542 (dev->mem_end - dev->mem_start + 1) / mirror_size, 543 mirror_size); 544 545 if (register_netdev(dev)) 546 goto err_unmap; 547 548 cards[numcards++] = dev; 549 return 0; 550 551err_unmap: 552 iounmap(lp->mem_start); 553err_free_irq: 554 free_irq(dev->irq, dev); 555err_release_mem: 556 release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1); 557err_free_dev: 558 free_arcdev(dev); 559 return -EIO; 560} 561 562static void com90xx_command(struct net_device *dev, int cmd) 563{ 564 short ioaddr = dev->base_addr; 565 566 arcnet_outb(cmd, ioaddr, COM9026_REG_W_COMMAND); 567} 568 569static int com90xx_status(struct net_device *dev) 570{ 571 short ioaddr = dev->base_addr; 572 573 return arcnet_inb(ioaddr, COM9026_REG_R_STATUS); 574} 575 576static void com90xx_setmask(struct net_device *dev, int mask) 577{ 578 short ioaddr = dev->base_addr; 579 580 arcnet_outb(mask, ioaddr, COM9026_REG_W_INTMASK); 581} 582 583/* Do a hardware reset on the card, and set up necessary registers. 584 * 585 * This should be called as little as possible, because it disrupts the 586 * token on the network (causes a RECON) and requires a significant delay. 587 * 588 * However, it does make sure the card is in a defined state. 589 */ 590static int com90xx_reset(struct net_device *dev, int really_reset) 591{ 592 struct arcnet_local *lp = netdev_priv(dev); 593 short ioaddr = dev->base_addr; 594 595 arc_printk(D_INIT, dev, "Resetting (status=%02Xh)\n", 596 arcnet_inb(ioaddr, COM9026_REG_R_STATUS)); 597 598 if (really_reset) { 599 /* reset the card */ 600 arcnet_inb(ioaddr, COM9026_REG_R_RESET); 601 mdelay(RESETtime); 602 } 603 /* clear flags & end reset */ 604 arcnet_outb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND); 605 arcnet_outb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND); 606 607#if 0 608 /* don't do this until we verify that it doesn't hurt older cards! */ 609 arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) | ENABLE16flag, 610 ioaddr, COM9026_REG_RW_CONFIG); 611#endif 612 613 /* verify that the ARCnet signature byte is present */ 614 if (arcnet_readb(lp->mem_start, COM9026_REG_R_STATUS) != TESTvalue) { 615 if (really_reset) 616 arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n"); 617 return 1; 618 } 619 /* enable extended (512-byte) packets */ 620 arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND); 621 622 /* clean out all the memory to make debugging make more sense :) */ 623 if (BUGLVL(D_DURING)) 624 memset_io(lp->mem_start, 0x42, 2048); 625 626 /* done! return success. */ 627 return 0; 628} 629 630static void com90xx_copy_to_card(struct net_device *dev, int bufnum, 631 int offset, void *buf, int count) 632{ 633 struct arcnet_local *lp = netdev_priv(dev); 634 void __iomem *memaddr = lp->mem_start + bufnum * 512 + offset; 635 636 TIME(dev, "memcpy_toio", count, memcpy_toio(memaddr, buf, count)); 637} 638 639static void com90xx_copy_from_card(struct net_device *dev, int bufnum, 640 int offset, void *buf, int count) 641{ 642 struct arcnet_local *lp = netdev_priv(dev); 643 void __iomem *memaddr = lp->mem_start + bufnum * 512 + offset; 644 645 TIME(dev, "memcpy_fromio", count, memcpy_fromio(buf, memaddr, count)); 646} 647 648MODULE_DESCRIPTION("ARCnet COM90xx normal chipset driver"); 649MODULE_LICENSE("GPL"); 650 651static int __init com90xx_init(void) 652{ 653 if (irq == 2) 654 irq = 9; 655 com90xx_probe(); 656 if (!numcards) 657 return -EIO; 658 return 0; 659} 660 661static void __exit com90xx_exit(void) 662{ 663 struct net_device *dev; 664 struct arcnet_local *lp; 665 int count; 666 667 for (count = 0; count < numcards; count++) { 668 dev = cards[count]; 669 lp = netdev_priv(dev); 670 671 unregister_netdev(dev); 672 free_irq(dev->irq, dev); 673 iounmap(lp->mem_start); 674 release_region(dev->base_addr, ARCNET_TOTAL_SIZE); 675 release_mem_region(dev->mem_start, 676 dev->mem_end - dev->mem_start + 1); 677 free_arcdev(dev); 678 } 679} 680 681module_init(com90xx_init); 682module_exit(com90xx_exit); 683 684#ifndef MODULE 685static int __init com90xx_setup(char *s) 686{ 687 int ints[8]; 688 689 s = get_options(s, 8, ints); 690 if (!ints[0] && !*s) { 691 pr_notice("Disabled\n"); 692 return 1; 693 } 694 695 switch (ints[0]) { 696 default: /* ERROR */ 697 pr_err("Too many arguments\n"); 698 fallthrough; 699 case 3: /* Mem address */ 700 shmem = ints[3]; 701 fallthrough; 702 case 2: /* IRQ */ 703 irq = ints[2]; 704 fallthrough; 705 case 1: /* IO address */ 706 io = ints[1]; 707 } 708 709 if (*s) 710 snprintf(device, sizeof(device), "%s", s); 711 712 return 1; 713} 714 715__setup("com90xx=", com90xx_setup); 716#endif 717