1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * SQ930x subdriver 4 * 5 * Copyright (C) 2010 Jean-Fran��ois Moine <http://moinejf.free.fr> 6 * Copyright (C) 2006 -2008 Gerard Klaver <gerard at gkall dot hobby dot nl> 7 * Copyright (C) 2007 Sam Revitch <samr7@cs.washington.edu> 8 */ 9 10#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 11 12#define MODULE_NAME "sq930x" 13 14#include "gspca.h" 15 16MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>\n" 17 "Gerard Klaver <gerard at gkall dot hobby dot nl\n" 18 "Sam Revitch <samr7@cs.washington.edu>"); 19MODULE_DESCRIPTION("GSPCA/SQ930x USB Camera Driver"); 20MODULE_LICENSE("GPL"); 21 22/* Structure to hold all of our device specific stuff */ 23struct sd { 24 struct gspca_dev gspca_dev; /* !! must be the first item */ 25 26 struct { /* exposure/gain control cluster */ 27 struct v4l2_ctrl *exposure; 28 struct v4l2_ctrl *gain; 29 }; 30 31 u8 do_ctrl; 32 u8 gpio[2]; 33 u8 sensor; 34 u8 type; 35#define Generic 0 36#define Creative_live_motion 1 37}; 38enum sensors { 39 SENSOR_ICX098BQ, 40 SENSOR_LZ24BP, 41 SENSOR_MI0360, 42 SENSOR_MT9V111, /* = MI360SOC */ 43 SENSOR_OV7660, 44 SENSOR_OV9630, 45}; 46 47static struct v4l2_pix_format vga_mode[] = { 48 {320, 240, V4L2_PIX_FMT_SRGGB8, V4L2_FIELD_NONE, 49 .bytesperline = 320, 50 .sizeimage = 320 * 240, 51 .colorspace = V4L2_COLORSPACE_SRGB, 52 .priv = 0}, 53 {640, 480, V4L2_PIX_FMT_SRGGB8, V4L2_FIELD_NONE, 54 .bytesperline = 640, 55 .sizeimage = 640 * 480, 56 .colorspace = V4L2_COLORSPACE_SRGB, 57 .priv = 1}, 58}; 59 60/* sq930x registers */ 61#define SQ930_CTRL_UCBUS_IO 0x0001 62#define SQ930_CTRL_I2C_IO 0x0002 63#define SQ930_CTRL_GPIO 0x0005 64#define SQ930_CTRL_CAP_START 0x0010 65#define SQ930_CTRL_CAP_STOP 0x0011 66#define SQ930_CTRL_SET_EXPOSURE 0x001d 67#define SQ930_CTRL_RESET 0x001e 68#define SQ930_CTRL_GET_DEV_INFO 0x001f 69 70/* gpio 1 (8..15) */ 71#define SQ930_GPIO_DFL_I2C_SDA 0x0001 72#define SQ930_GPIO_DFL_I2C_SCL 0x0002 73#define SQ930_GPIO_RSTBAR 0x0004 74#define SQ930_GPIO_EXTRA1 0x0040 75#define SQ930_GPIO_EXTRA2 0x0080 76/* gpio 3 (24..31) */ 77#define SQ930_GPIO_POWER 0x0200 78#define SQ930_GPIO_DFL_LED 0x1000 79 80struct ucbus_write_cmd { 81 u16 bw_addr; 82 u8 bw_data; 83}; 84struct i2c_write_cmd { 85 u8 reg; 86 u16 val; 87}; 88 89static const struct ucbus_write_cmd icx098bq_start_0[] = { 90 {0x0354, 0x00}, {0x03fa, 0x00}, {0xf800, 0x02}, {0xf801, 0xce}, 91 {0xf802, 0xc1}, {0xf804, 0x00}, {0xf808, 0x00}, {0xf809, 0x0e}, 92 {0xf80a, 0x01}, {0xf80b, 0xee}, {0xf807, 0x60}, {0xf80c, 0x02}, 93 {0xf80d, 0xf0}, {0xf80e, 0x03}, {0xf80f, 0x0a}, {0xf81c, 0x02}, 94 {0xf81d, 0xf0}, {0xf81e, 0x03}, {0xf81f, 0x0a}, {0xf83a, 0x00}, 95 {0xf83b, 0x10}, {0xf83c, 0x00}, {0xf83d, 0x4e}, {0xf810, 0x04}, 96 {0xf811, 0x00}, {0xf812, 0x02}, {0xf813, 0x10}, {0xf803, 0x00}, 97 {0xf814, 0x01}, {0xf815, 0x18}, {0xf816, 0x00}, {0xf817, 0x48}, 98 {0xf818, 0x00}, {0xf819, 0x25}, {0xf81a, 0x00}, {0xf81b, 0x3c}, 99 {0xf82f, 0x03}, {0xf820, 0xff}, {0xf821, 0x0d}, {0xf822, 0xff}, 100 {0xf823, 0x07}, {0xf824, 0xff}, {0xf825, 0x03}, {0xf826, 0xff}, 101 {0xf827, 0x06}, {0xf828, 0xff}, {0xf829, 0x03}, {0xf82a, 0xff}, 102 {0xf82b, 0x0c}, {0xf82c, 0xfd}, {0xf82d, 0x01}, {0xf82e, 0x00}, 103 {0xf830, 0x00}, {0xf831, 0x47}, {0xf832, 0x00}, {0xf833, 0x00}, 104 {0xf850, 0x00}, {0xf851, 0x00}, {0xf852, 0x00}, {0xf853, 0x24}, 105 {0xf854, 0x00}, {0xf855, 0x18}, {0xf856, 0x00}, {0xf857, 0x3c}, 106 {0xf858, 0x00}, {0xf859, 0x0c}, {0xf85a, 0x00}, {0xf85b, 0x30}, 107 {0xf85c, 0x00}, {0xf85d, 0x0c}, {0xf85e, 0x00}, {0xf85f, 0x30}, 108 {0xf860, 0x00}, {0xf861, 0x48}, {0xf862, 0x01}, {0xf863, 0xdc}, 109 {0xf864, 0xff}, {0xf865, 0x98}, {0xf866, 0xff}, {0xf867, 0xc0}, 110 {0xf868, 0xff}, {0xf869, 0x70}, {0xf86c, 0xff}, {0xf86d, 0x00}, 111 {0xf86a, 0xff}, {0xf86b, 0x48}, {0xf86e, 0xff}, {0xf86f, 0x00}, 112 {0xf870, 0x01}, {0xf871, 0xdb}, {0xf872, 0x01}, {0xf873, 0xfa}, 113 {0xf874, 0x01}, {0xf875, 0xdb}, {0xf876, 0x01}, {0xf877, 0xfa}, 114 {0xf878, 0x0f}, {0xf879, 0x0f}, {0xf87a, 0xff}, {0xf87b, 0xff}, 115 {0xf800, 0x03} 116}; 117static const struct ucbus_write_cmd icx098bq_start_1[] = { 118 {0xf5f0, 0x00}, {0xf5f1, 0xcd}, {0xf5f2, 0x80}, {0xf5f3, 0x80}, 119 {0xf5f4, 0xc0}, 120 {0xf5f0, 0x49}, {0xf5f1, 0xcd}, {0xf5f2, 0x80}, {0xf5f3, 0x80}, 121 {0xf5f4, 0xc0}, 122 {0xf5fa, 0x00}, {0xf5f6, 0x00}, {0xf5f7, 0x00}, {0xf5f8, 0x00}, 123 {0xf5f9, 0x00} 124}; 125 126static const struct ucbus_write_cmd icx098bq_start_2[] = { 127 {0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x82}, {0xf806, 0x00}, 128 {0xf807, 0x7f}, {0xf800, 0x03}, 129 {0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x40}, {0xf806, 0x00}, 130 {0xf807, 0x7f}, {0xf800, 0x03}, 131 {0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0xcf}, {0xf806, 0xd0}, 132 {0xf807, 0x7f}, {0xf800, 0x03}, 133 {0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x00}, {0xf806, 0x00}, 134 {0xf807, 0x7f}, {0xf800, 0x03} 135}; 136 137static const struct ucbus_write_cmd lz24bp_start_0[] = { 138 {0x0354, 0x00}, {0x03fa, 0x00}, {0xf800, 0x02}, {0xf801, 0xbe}, 139 {0xf802, 0xc6}, {0xf804, 0x00}, {0xf808, 0x00}, {0xf809, 0x06}, 140 {0xf80a, 0x01}, {0xf80b, 0xfe}, {0xf807, 0x84}, {0xf80c, 0x02}, 141 {0xf80d, 0xf7}, {0xf80e, 0x03}, {0xf80f, 0x0b}, {0xf81c, 0x00}, 142 {0xf81d, 0x49}, {0xf81e, 0x03}, {0xf81f, 0x0b}, {0xf83a, 0x00}, 143 {0xf83b, 0x01}, {0xf83c, 0x00}, {0xf83d, 0x6b}, {0xf810, 0x03}, 144 {0xf811, 0x10}, {0xf812, 0x02}, {0xf813, 0x6f}, {0xf803, 0x00}, 145 {0xf814, 0x00}, {0xf815, 0x44}, {0xf816, 0x00}, {0xf817, 0x48}, 146 {0xf818, 0x00}, {0xf819, 0x25}, {0xf81a, 0x00}, {0xf81b, 0x3c}, 147 {0xf82f, 0x03}, {0xf820, 0xff}, {0xf821, 0x0d}, {0xf822, 0xff}, 148 {0xf823, 0x07}, {0xf824, 0xfd}, {0xf825, 0x07}, {0xf826, 0xf0}, 149 {0xf827, 0x0c}, {0xf828, 0xff}, {0xf829, 0x03}, {0xf82a, 0xff}, 150 {0xf82b, 0x0c}, {0xf82c, 0xfc}, {0xf82d, 0x01}, {0xf82e, 0x00}, 151 {0xf830, 0x00}, {0xf831, 0x47}, {0xf832, 0x00}, {0xf833, 0x00}, 152 {0xf850, 0x00}, {0xf851, 0x00}, {0xf852, 0x00}, {0xf853, 0x24}, 153 {0xf854, 0x00}, {0xf855, 0x0c}, {0xf856, 0x00}, {0xf857, 0x30}, 154 {0xf858, 0x00}, {0xf859, 0x18}, {0xf85a, 0x00}, {0xf85b, 0x3c}, 155 {0xf85c, 0x00}, {0xf85d, 0x18}, {0xf85e, 0x00}, {0xf85f, 0x3c}, 156 {0xf860, 0xff}, {0xf861, 0x37}, {0xf862, 0xff}, {0xf863, 0x1d}, 157 {0xf864, 0xff}, {0xf865, 0x98}, {0xf866, 0xff}, {0xf867, 0xc0}, 158 {0xf868, 0x00}, {0xf869, 0x37}, {0xf86c, 0x02}, {0xf86d, 0x1d}, 159 {0xf86a, 0x00}, {0xf86b, 0x37}, {0xf86e, 0x02}, {0xf86f, 0x1d}, 160 {0xf870, 0x01}, {0xf871, 0xc6}, {0xf872, 0x02}, {0xf873, 0x04}, 161 {0xf874, 0x01}, {0xf875, 0xc6}, {0xf876, 0x02}, {0xf877, 0x04}, 162 {0xf878, 0x0f}, {0xf879, 0x0f}, {0xf87a, 0xff}, {0xf87b, 0xff}, 163 {0xf800, 0x03} 164}; 165static const struct ucbus_write_cmd lz24bp_start_1_gen[] = { 166 {0xf5f0, 0x00}, {0xf5f1, 0xff}, {0xf5f2, 0x80}, {0xf5f3, 0x80}, 167 {0xf5f4, 0xb3}, 168 {0xf5f0, 0x40}, {0xf5f1, 0xff}, {0xf5f2, 0x80}, {0xf5f3, 0x80}, 169 {0xf5f4, 0xb3}, 170 {0xf5fa, 0x00}, {0xf5f6, 0x00}, {0xf5f7, 0x00}, {0xf5f8, 0x00}, 171 {0xf5f9, 0x00} 172}; 173 174static const struct ucbus_write_cmd lz24bp_start_1_clm[] = { 175 {0xf5f0, 0x00}, {0xf5f1, 0xff}, {0xf5f2, 0x88}, {0xf5f3, 0x88}, 176 {0xf5f4, 0xc0}, 177 {0xf5f0, 0x40}, {0xf5f1, 0xff}, {0xf5f2, 0x88}, {0xf5f3, 0x88}, 178 {0xf5f4, 0xc0}, 179 {0xf5fa, 0x00}, {0xf5f6, 0x00}, {0xf5f7, 0x00}, {0xf5f8, 0x00}, 180 {0xf5f9, 0x00} 181}; 182 183static const struct ucbus_write_cmd lz24bp_start_2[] = { 184 {0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x80}, {0xf806, 0x00}, 185 {0xf807, 0x7f}, {0xf800, 0x03}, 186 {0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x4e}, {0xf806, 0x00}, 187 {0xf807, 0x7f}, {0xf800, 0x03}, 188 {0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0xc0}, {0xf806, 0x48}, 189 {0xf807, 0x7f}, {0xf800, 0x03}, 190 {0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x00}, {0xf806, 0x00}, 191 {0xf807, 0x7f}, {0xf800, 0x03} 192}; 193 194static const struct ucbus_write_cmd mi0360_start_0[] = { 195 {0x0354, 0x00}, {0x03fa, 0x00}, {0xf332, 0xcc}, {0xf333, 0xcc}, 196 {0xf334, 0xcc}, {0xf335, 0xcc}, {0xf33f, 0x00} 197}; 198static const struct i2c_write_cmd mi0360_init_23[] = { 199 {0x30, 0x0040}, /* reserved - def 0x0005 */ 200 {0x31, 0x0000}, /* reserved - def 0x002a */ 201 {0x34, 0x0100}, /* reserved - def 0x0100 */ 202 {0x3d, 0x068f}, /* reserved - def 0x068f */ 203}; 204static const struct i2c_write_cmd mi0360_init_24[] = { 205 {0x03, 0x01e5}, /* window height */ 206 {0x04, 0x0285}, /* window width */ 207}; 208static const struct i2c_write_cmd mi0360_init_25[] = { 209 {0x35, 0x0020}, /* global gain */ 210 {0x2b, 0x0020}, /* green1 gain */ 211 {0x2c, 0x002a}, /* blue gain */ 212 {0x2d, 0x0028}, /* red gain */ 213 {0x2e, 0x0020}, /* green2 gain */ 214}; 215static const struct ucbus_write_cmd mi0360_start_1[] = { 216 {0xf5f0, 0x11}, {0xf5f1, 0x99}, {0xf5f2, 0x80}, {0xf5f3, 0x80}, 217 {0xf5f4, 0xa6}, 218 {0xf5f0, 0x51}, {0xf5f1, 0x99}, {0xf5f2, 0x80}, {0xf5f3, 0x80}, 219 {0xf5f4, 0xa6}, 220 {0xf5fa, 0x00}, {0xf5f6, 0x00}, {0xf5f7, 0x00}, {0xf5f8, 0x00}, 221 {0xf5f9, 0x00} 222}; 223static const struct i2c_write_cmd mi0360_start_2[] = { 224 {0x62, 0x041d}, /* reserved - def 0x0418 */ 225}; 226static const struct i2c_write_cmd mi0360_start_3[] = { 227 {0x05, 0x007b}, /* horiz blanking */ 228}; 229static const struct i2c_write_cmd mi0360_start_4[] = { 230 {0x05, 0x03f5}, /* horiz blanking */ 231}; 232 233static const struct i2c_write_cmd mt9v111_init_0[] = { 234 {0x01, 0x0001}, /* select IFP/SOC registers */ 235 {0x06, 0x300c}, /* operating mode control */ 236 {0x08, 0xcc00}, /* output format control (RGB) */ 237 {0x01, 0x0004}, /* select sensor core registers */ 238}; 239static const struct i2c_write_cmd mt9v111_init_1[] = { 240 {0x03, 0x01e5}, /* window height */ 241 {0x04, 0x0285}, /* window width */ 242}; 243static const struct i2c_write_cmd mt9v111_init_2[] = { 244 {0x30, 0x7800}, 245 {0x31, 0x0000}, 246 {0x07, 0x3002}, /* output control */ 247 {0x35, 0x0020}, /* global gain */ 248 {0x2b, 0x0020}, /* green1 gain */ 249 {0x2c, 0x0020}, /* blue gain */ 250 {0x2d, 0x0020}, /* red gain */ 251 {0x2e, 0x0020}, /* green2 gain */ 252}; 253static const struct ucbus_write_cmd mt9v111_start_1[] = { 254 {0xf5f0, 0x11}, {0xf5f1, 0x96}, {0xf5f2, 0x80}, {0xf5f3, 0x80}, 255 {0xf5f4, 0xaa}, 256 {0xf5f0, 0x51}, {0xf5f1, 0x96}, {0xf5f2, 0x80}, {0xf5f3, 0x80}, 257 {0xf5f4, 0xaa}, 258 {0xf5fa, 0x00}, {0xf5f6, 0x0a}, {0xf5f7, 0x0a}, {0xf5f8, 0x0a}, 259 {0xf5f9, 0x0a} 260}; 261static const struct i2c_write_cmd mt9v111_init_3[] = { 262 {0x62, 0x0405}, 263}; 264static const struct i2c_write_cmd mt9v111_init_4[] = { 265/* {0x05, 0x00ce}, */ 266 {0x05, 0x005d}, /* horizontal blanking */ 267}; 268 269static const struct ucbus_write_cmd ov7660_start_0[] = { 270 {0x0354, 0x00}, {0x03fa, 0x00}, {0xf332, 0x00}, {0xf333, 0xc0}, 271 {0xf334, 0x39}, {0xf335, 0xe7}, {0xf33f, 0x03} 272}; 273 274static const struct ucbus_write_cmd ov9630_start_0[] = { 275 {0x0354, 0x00}, {0x03fa, 0x00}, {0xf332, 0x00}, {0xf333, 0x00}, 276 {0xf334, 0x3e}, {0xf335, 0xf8}, {0xf33f, 0x03} 277}; 278 279/* start parameters indexed by [sensor][mode] */ 280static const struct cap_s { 281 u8 cc_sizeid; 282 u8 cc_bytes[32]; 283} capconfig[4][2] = { 284 [SENSOR_ICX098BQ] = { 285 {2, /* Bayer 320x240 */ 286 {0x05, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee, 287 0x01, 0x01, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, 288 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0, 289 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} }, 290 {4, /* Bayer 640x480 */ 291 {0x01, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee, 292 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, 293 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 294 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} }, 295 }, 296 [SENSOR_LZ24BP] = { 297 {2, /* Bayer 320x240 */ 298 {0x05, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xee, 299 0x01, 0x01, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, 300 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 301 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} }, 302 {4, /* Bayer 640x480 */ 303 {0x01, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xee, 304 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, 305 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 306 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} }, 307 }, 308 [SENSOR_MI0360] = { 309 {2, /* Bayer 320x240 */ 310 {0x05, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1, 311 0x01, 0x01, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, 312 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 313 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} }, 314 {4, /* Bayer 640x480 */ 315 {0x01, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1, 316 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, 317 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 318 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} }, 319 }, 320 [SENSOR_MT9V111] = { 321 {2, /* Bayer 320x240 */ 322 {0x05, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1, 323 0x01, 0x01, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, 324 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 325 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} }, 326 {4, /* Bayer 640x480 */ 327 {0x01, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1, 328 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, 329 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 330 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} }, 331 }, 332}; 333 334struct sensor_s { 335 const char *name; 336 u8 i2c_addr; 337 u8 i2c_dum; 338 u8 gpio[5]; 339 u8 cmd_len; 340 const struct ucbus_write_cmd *cmd; 341}; 342 343static const struct sensor_s sensor_tb[] = { 344 [SENSOR_ICX098BQ] = { 345 "icx098bp", 346 0x00, 0x00, 347 {0, 348 SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL, 349 SQ930_GPIO_DFL_I2C_SDA, 350 0, 351 SQ930_GPIO_RSTBAR 352 }, 353 8, icx098bq_start_0 354 }, 355 [SENSOR_LZ24BP] = { 356 "lz24bp", 357 0x00, 0x00, 358 {0, 359 SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL, 360 SQ930_GPIO_DFL_I2C_SDA, 361 0, 362 SQ930_GPIO_RSTBAR 363 }, 364 8, lz24bp_start_0 365 }, 366 [SENSOR_MI0360] = { 367 "mi0360", 368 0x5d, 0x80, 369 {SQ930_GPIO_RSTBAR, 370 SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL, 371 SQ930_GPIO_DFL_I2C_SDA, 372 0, 373 0 374 }, 375 7, mi0360_start_0 376 }, 377 [SENSOR_MT9V111] = { 378 "mt9v111", 379 0x5c, 0x7f, 380 {SQ930_GPIO_RSTBAR, 381 SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL, 382 SQ930_GPIO_DFL_I2C_SDA, 383 0, 384 0 385 }, 386 7, mi0360_start_0 387 }, 388 [SENSOR_OV7660] = { 389 "ov7660", 390 0x21, 0x00, 391 {0, 392 SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL, 393 SQ930_GPIO_DFL_I2C_SDA, 394 0, 395 SQ930_GPIO_RSTBAR 396 }, 397 7, ov7660_start_0 398 }, 399 [SENSOR_OV9630] = { 400 "ov9630", 401 0x30, 0x00, 402 {0, 403 SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL, 404 SQ930_GPIO_DFL_I2C_SDA, 405 0, 406 SQ930_GPIO_RSTBAR 407 }, 408 7, ov9630_start_0 409 }, 410}; 411 412static void reg_r(struct gspca_dev *gspca_dev, 413 u16 value, int len) 414{ 415 int ret; 416 417 if (gspca_dev->usb_err < 0) 418 return; 419 ret = usb_control_msg(gspca_dev->dev, 420 usb_rcvctrlpipe(gspca_dev->dev, 0), 421 0x0c, 422 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 423 value, 0, gspca_dev->usb_buf, len, 424 500); 425 if (ret < 0) { 426 pr_err("reg_r %04x failed %d\n", value, ret); 427 gspca_dev->usb_err = ret; 428 /* 429 * Make sure the buffer is zeroed to avoid uninitialized 430 * values. 431 */ 432 memset(gspca_dev->usb_buf, 0, USB_BUF_SZ); 433 } 434} 435 436static void reg_w(struct gspca_dev *gspca_dev, u16 value, u16 index) 437{ 438 int ret; 439 440 if (gspca_dev->usb_err < 0) 441 return; 442 gspca_dbg(gspca_dev, D_USBO, "reg_w v: %04x i: %04x\n", value, index); 443 ret = usb_control_msg(gspca_dev->dev, 444 usb_sndctrlpipe(gspca_dev->dev, 0), 445 0x0c, /* request */ 446 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 447 value, index, NULL, 0, 448 500); 449 msleep(30); 450 if (ret < 0) { 451 pr_err("reg_w %04x %04x failed %d\n", value, index, ret); 452 gspca_dev->usb_err = ret; 453 } 454} 455 456static void reg_wb(struct gspca_dev *gspca_dev, u16 value, u16 index, 457 const u8 *data, int len) 458{ 459 int ret; 460 461 if (gspca_dev->usb_err < 0) 462 return; 463 gspca_dbg(gspca_dev, D_USBO, "reg_wb v: %04x i: %04x %02x...%02x\n", 464 value, index, *data, data[len - 1]); 465 memcpy(gspca_dev->usb_buf, data, len); 466 ret = usb_control_msg(gspca_dev->dev, 467 usb_sndctrlpipe(gspca_dev->dev, 0), 468 0x0c, /* request */ 469 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 470 value, index, gspca_dev->usb_buf, len, 471 1000); 472 msleep(30); 473 if (ret < 0) { 474 pr_err("reg_wb %04x %04x failed %d\n", value, index, ret); 475 gspca_dev->usb_err = ret; 476 } 477} 478 479static void i2c_write(struct sd *sd, 480 const struct i2c_write_cmd *cmd, 481 int ncmds) 482{ 483 struct gspca_dev *gspca_dev = &sd->gspca_dev; 484 const struct sensor_s *sensor; 485 u16 val, idx; 486 u8 *buf; 487 int ret; 488 489 if (gspca_dev->usb_err < 0) 490 return; 491 492 sensor = &sensor_tb[sd->sensor]; 493 494 val = (sensor->i2c_addr << 8) | SQ930_CTRL_I2C_IO; 495 idx = (cmd->val & 0xff00) | cmd->reg; 496 497 buf = gspca_dev->usb_buf; 498 *buf++ = sensor->i2c_dum; 499 *buf++ = cmd->val; 500 501 while (--ncmds > 0) { 502 cmd++; 503 *buf++ = cmd->reg; 504 *buf++ = cmd->val >> 8; 505 *buf++ = sensor->i2c_dum; 506 *buf++ = cmd->val; 507 } 508 509 gspca_dbg(gspca_dev, D_USBO, "i2c_w v: %04x i: %04x %02x...%02x\n", 510 val, idx, gspca_dev->usb_buf[0], buf[-1]); 511 ret = usb_control_msg(gspca_dev->dev, 512 usb_sndctrlpipe(gspca_dev->dev, 0), 513 0x0c, /* request */ 514 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 515 val, idx, 516 gspca_dev->usb_buf, buf - gspca_dev->usb_buf, 517 500); 518 if (ret < 0) { 519 pr_err("i2c_write failed %d\n", ret); 520 gspca_dev->usb_err = ret; 521 } 522} 523 524static void ucbus_write(struct gspca_dev *gspca_dev, 525 const struct ucbus_write_cmd *cmd, 526 int ncmds, 527 int batchsize) 528{ 529 u8 *buf; 530 u16 val, idx; 531 int len, ret; 532 533 if (gspca_dev->usb_err < 0) 534 return; 535 536 if ((batchsize - 1) * 3 > USB_BUF_SZ) { 537 gspca_err(gspca_dev, "Bug: usb_buf overflow\n"); 538 gspca_dev->usb_err = -ENOMEM; 539 return; 540 } 541 542 for (;;) { 543 len = ncmds; 544 if (len > batchsize) 545 len = batchsize; 546 ncmds -= len; 547 548 val = (cmd->bw_addr << 8) | SQ930_CTRL_UCBUS_IO; 549 idx = (cmd->bw_data << 8) | (cmd->bw_addr >> 8); 550 551 buf = gspca_dev->usb_buf; 552 while (--len > 0) { 553 cmd++; 554 *buf++ = cmd->bw_addr; 555 *buf++ = cmd->bw_addr >> 8; 556 *buf++ = cmd->bw_data; 557 } 558 if (buf != gspca_dev->usb_buf) 559 gspca_dbg(gspca_dev, D_USBO, "ucbus v: %04x i: %04x %02x...%02x\n", 560 val, idx, 561 gspca_dev->usb_buf[0], buf[-1]); 562 else 563 gspca_dbg(gspca_dev, D_USBO, "ucbus v: %04x i: %04x\n", 564 val, idx); 565 ret = usb_control_msg(gspca_dev->dev, 566 usb_sndctrlpipe(gspca_dev->dev, 0), 567 0x0c, /* request */ 568 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 569 val, idx, 570 gspca_dev->usb_buf, buf - gspca_dev->usb_buf, 571 500); 572 if (ret < 0) { 573 pr_err("ucbus_write failed %d\n", ret); 574 gspca_dev->usb_err = ret; 575 return; 576 } 577 msleep(30); 578 if (ncmds <= 0) 579 break; 580 cmd++; 581 } 582} 583 584static void gpio_set(struct sd *sd, u16 val, u16 mask) 585{ 586 struct gspca_dev *gspca_dev = &sd->gspca_dev; 587 588 if (mask & 0x00ff) { 589 sd->gpio[0] &= ~mask; 590 sd->gpio[0] |= val; 591 reg_w(gspca_dev, 0x0100 | SQ930_CTRL_GPIO, 592 ~sd->gpio[0] << 8); 593 } 594 mask >>= 8; 595 val >>= 8; 596 if (mask) { 597 sd->gpio[1] &= ~mask; 598 sd->gpio[1] |= val; 599 reg_w(gspca_dev, 0x0300 | SQ930_CTRL_GPIO, 600 ~sd->gpio[1] << 8); 601 } 602} 603 604static void gpio_init(struct sd *sd, 605 const u8 *gpio) 606{ 607 gpio_set(sd, *gpio++, 0x000f); 608 gpio_set(sd, *gpio++, 0x000f); 609 gpio_set(sd, *gpio++, 0x000f); 610 gpio_set(sd, *gpio++, 0x000f); 611 gpio_set(sd, *gpio, 0x000f); 612} 613 614static void bridge_init(struct sd *sd) 615{ 616 static const struct ucbus_write_cmd clkfreq_cmd = { 617 0xf031, 0 /* SQ930_CLKFREQ_60MHZ */ 618 }; 619 620 ucbus_write(&sd->gspca_dev, &clkfreq_cmd, 1, 1); 621 622 gpio_set(sd, SQ930_GPIO_POWER, 0xff00); 623} 624 625static void cmos_probe(struct gspca_dev *gspca_dev) 626{ 627 struct sd *sd = (struct sd *) gspca_dev; 628 int i; 629 const struct sensor_s *sensor; 630 static const u8 probe_order[] = { 631/* SENSOR_LZ24BP, (tested as ccd) */ 632 SENSOR_OV9630, 633 SENSOR_MI0360, 634 SENSOR_OV7660, 635 SENSOR_MT9V111, 636 }; 637 638 for (i = 0; i < ARRAY_SIZE(probe_order); i++) { 639 sensor = &sensor_tb[probe_order[i]]; 640 ucbus_write(&sd->gspca_dev, sensor->cmd, sensor->cmd_len, 8); 641 gpio_init(sd, sensor->gpio); 642 msleep(100); 643 reg_r(gspca_dev, (sensor->i2c_addr << 8) | 0x001c, 1); 644 msleep(100); 645 if (gspca_dev->usb_buf[0] != 0) 646 break; 647 } 648 if (i >= ARRAY_SIZE(probe_order)) { 649 pr_err("Unknown sensor\n"); 650 gspca_dev->usb_err = -EINVAL; 651 return; 652 } 653 sd->sensor = probe_order[i]; 654 switch (sd->sensor) { 655 case SENSOR_OV7660: 656 case SENSOR_OV9630: 657 pr_err("Sensor %s not yet treated\n", 658 sensor_tb[sd->sensor].name); 659 gspca_dev->usb_err = -EINVAL; 660 break; 661 } 662} 663 664static void mt9v111_init(struct gspca_dev *gspca_dev) 665{ 666 int i, nwait; 667 static const u8 cmd_001b[] = { 668 0x00, 0x3b, 0xf6, 0x01, 0x03, 0x02, 0x00, 0x00, 669 0x00, 0x00, 0x00 670 }; 671 static const u8 cmd_011b[][7] = { 672 {0x10, 0x01, 0x66, 0x08, 0x00, 0x00, 0x00}, 673 {0x01, 0x00, 0x1a, 0x04, 0x00, 0x00, 0x00}, 674 {0x20, 0x00, 0x10, 0x04, 0x00, 0x00, 0x00}, 675 {0x02, 0x01, 0xae, 0x01, 0x00, 0x00, 0x00}, 676 }; 677 678 reg_wb(gspca_dev, 0x001b, 0x0000, cmd_001b, sizeof cmd_001b); 679 for (i = 0; i < ARRAY_SIZE(cmd_011b); i++) { 680 reg_wb(gspca_dev, 0x001b, 0x0000, cmd_011b[i], 681 ARRAY_SIZE(cmd_011b[0])); 682 msleep(400); 683 nwait = 20; 684 for (;;) { 685 reg_r(gspca_dev, 0x031b, 1); 686 if (gspca_dev->usb_buf[0] == 0 687 || gspca_dev->usb_err != 0) 688 break; 689 if (--nwait < 0) { 690 gspca_dbg(gspca_dev, D_PROBE, "mt9v111_init timeout\n"); 691 gspca_dev->usb_err = -ETIME; 692 return; 693 } 694 msleep(50); 695 } 696 } 697} 698 699static void global_init(struct sd *sd, int first_time) 700{ 701 switch (sd->sensor) { 702 case SENSOR_ICX098BQ: 703 if (first_time) 704 ucbus_write(&sd->gspca_dev, 705 icx098bq_start_0, 706 8, 8); 707 gpio_init(sd, sensor_tb[sd->sensor].gpio); 708 break; 709 case SENSOR_LZ24BP: 710 if (sd->type != Creative_live_motion) 711 gpio_set(sd, SQ930_GPIO_EXTRA1, 0x00ff); 712 else 713 gpio_set(sd, 0, 0x00ff); 714 msleep(50); 715 if (first_time) 716 ucbus_write(&sd->gspca_dev, 717 lz24bp_start_0, 718 8, 8); 719 gpio_init(sd, sensor_tb[sd->sensor].gpio); 720 break; 721 case SENSOR_MI0360: 722 if (first_time) 723 ucbus_write(&sd->gspca_dev, 724 mi0360_start_0, 725 ARRAY_SIZE(mi0360_start_0), 726 8); 727 gpio_init(sd, sensor_tb[sd->sensor].gpio); 728 gpio_set(sd, SQ930_GPIO_EXTRA2, SQ930_GPIO_EXTRA2); 729 break; 730 default: 731/* case SENSOR_MT9V111: */ 732 if (first_time) 733 mt9v111_init(&sd->gspca_dev); 734 else 735 gpio_init(sd, sensor_tb[sd->sensor].gpio); 736 break; 737 } 738} 739 740static void lz24bp_ppl(struct sd *sd, u16 ppl) 741{ 742 struct ucbus_write_cmd cmds[2] = { 743 {0xf810, ppl >> 8}, 744 {0xf811, ppl} 745 }; 746 747 ucbus_write(&sd->gspca_dev, cmds, ARRAY_SIZE(cmds), 2); 748} 749 750static void setexposure(struct gspca_dev *gspca_dev, s32 expo, s32 gain) 751{ 752 struct sd *sd = (struct sd *) gspca_dev; 753 int i, integclks, intstartclk, frameclks, min_frclk; 754 const struct sensor_s *sensor; 755 u16 cmd; 756 u8 buf[15]; 757 758 integclks = expo; 759 i = 0; 760 cmd = SQ930_CTRL_SET_EXPOSURE; 761 762 switch (sd->sensor) { 763 case SENSOR_ICX098BQ: /* ccd */ 764 case SENSOR_LZ24BP: 765 min_frclk = sd->sensor == SENSOR_ICX098BQ ? 0x210 : 0x26f; 766 if (integclks >= min_frclk) { 767 intstartclk = 0; 768 frameclks = integclks; 769 } else { 770 intstartclk = min_frclk - integclks; 771 frameclks = min_frclk; 772 } 773 buf[i++] = intstartclk >> 8; 774 buf[i++] = intstartclk; 775 buf[i++] = frameclks >> 8; 776 buf[i++] = frameclks; 777 buf[i++] = gain; 778 break; 779 default: /* cmos */ 780/* case SENSOR_MI0360: */ 781/* case SENSOR_MT9V111: */ 782 cmd |= 0x0100; 783 sensor = &sensor_tb[sd->sensor]; 784 buf[i++] = sensor->i2c_addr; /* i2c_slave_addr */ 785 buf[i++] = 0x08; /* 2 * ni2c */ 786 buf[i++] = 0x09; /* reg = shutter width */ 787 buf[i++] = integclks >> 8; /* val H */ 788 buf[i++] = sensor->i2c_dum; 789 buf[i++] = integclks; /* val L */ 790 buf[i++] = 0x35; /* reg = global gain */ 791 buf[i++] = 0x00; /* val H */ 792 buf[i++] = sensor->i2c_dum; 793 buf[i++] = 0x80 + gain / 2; /* val L */ 794 buf[i++] = 0x00; 795 buf[i++] = 0x00; 796 buf[i++] = 0x00; 797 buf[i++] = 0x00; 798 buf[i++] = 0x83; 799 break; 800 } 801 reg_wb(gspca_dev, cmd, 0, buf, i); 802} 803 804/* This function is called at probe time just before sd_init */ 805static int sd_config(struct gspca_dev *gspca_dev, 806 const struct usb_device_id *id) 807{ 808 struct sd *sd = (struct sd *) gspca_dev; 809 struct cam *cam = &gspca_dev->cam; 810 811 sd->sensor = id->driver_info >> 8; 812 sd->type = id->driver_info; 813 814 cam->cam_mode = vga_mode; 815 cam->nmodes = ARRAY_SIZE(vga_mode); 816 817 cam->bulk = 1; 818 819 return 0; 820} 821 822/* this function is called at probe and resume time */ 823static int sd_init(struct gspca_dev *gspca_dev) 824{ 825 struct sd *sd = (struct sd *) gspca_dev; 826 827 sd->gpio[0] = sd->gpio[1] = 0xff; /* force gpio rewrite */ 828 829/*fixme: is this needed for icx098bp and mi0360? 830 if (sd->sensor != SENSOR_LZ24BP) 831 reg_w(gspca_dev, SQ930_CTRL_RESET, 0x0000); 832 */ 833 834 reg_r(gspca_dev, SQ930_CTRL_GET_DEV_INFO, 8); 835 if (gspca_dev->usb_err < 0) 836 return gspca_dev->usb_err; 837 838/* it returns: 839 * 03 00 12 93 0b f6 c9 00 live! ultra 840 * 03 00 07 93 0b f6 ca 00 live! ultra for notebook 841 * 03 00 12 93 0b fe c8 00 Trust WB-3500T 842 * 02 00 06 93 0b fe c8 00 Joy-IT 318S 843 * 03 00 12 93 0b f6 cf 00 icam tracer - sensor icx098bq 844 * 02 00 12 93 0b fe cf 00 ProQ Motion Webcam 845 * 846 * byte 847 * 0: 02 = usb 1.0 (12Mbit) / 03 = usb2.0 (480Mbit) 848 * 1: 00 849 * 2: 06 / 07 / 12 = mode webcam? firmware?? 850 * 3: 93 chip = 930b (930b or 930c) 851 * 4: 0b 852 * 5: f6 = cdd (icx098bq, lz24bp) / fe or de = cmos (i2c) (other sensors) 853 * 6: c8 / c9 / ca / cf = mode webcam?, sensor? webcam? 854 * 7: 00 855 */ 856 gspca_dbg(gspca_dev, D_PROBE, "info: %*ph\n", 8, gspca_dev->usb_buf); 857 858 bridge_init(sd); 859 860 if (sd->sensor == SENSOR_MI0360) { 861 862 /* no sensor probe for icam tracer */ 863 if (gspca_dev->usb_buf[5] == 0xf6) /* if ccd */ 864 sd->sensor = SENSOR_ICX098BQ; 865 else 866 cmos_probe(gspca_dev); 867 } 868 if (gspca_dev->usb_err >= 0) { 869 gspca_dbg(gspca_dev, D_PROBE, "Sensor %s\n", 870 sensor_tb[sd->sensor].name); 871 global_init(sd, 1); 872 } 873 return gspca_dev->usb_err; 874} 875 876/* send the start/stop commands to the webcam */ 877static void send_start(struct gspca_dev *gspca_dev) 878{ 879 struct sd *sd = (struct sd *) gspca_dev; 880 const struct cap_s *cap; 881 int mode; 882 883 mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; 884 cap = &capconfig[sd->sensor][mode]; 885 reg_wb(gspca_dev, 0x0900 | SQ930_CTRL_CAP_START, 886 0x0a00 | cap->cc_sizeid, 887 cap->cc_bytes, 32); 888} 889 890static void send_stop(struct gspca_dev *gspca_dev) 891{ 892 reg_w(gspca_dev, SQ930_CTRL_CAP_STOP, 0); 893} 894 895/* function called at start time before URB creation */ 896static int sd_isoc_init(struct gspca_dev *gspca_dev) 897{ 898 struct sd *sd = (struct sd *) gspca_dev; 899 900 gspca_dev->cam.bulk_nurbs = 1; /* there must be one URB only */ 901 sd->do_ctrl = 0; 902 gspca_dev->cam.bulk_size = gspca_dev->pixfmt.width * 903 gspca_dev->pixfmt.height + 8; 904 return 0; 905} 906 907/* start the capture */ 908static int sd_start(struct gspca_dev *gspca_dev) 909{ 910 struct sd *sd = (struct sd *) gspca_dev; 911 int mode; 912 913 bridge_init(sd); 914 global_init(sd, 0); 915 msleep(100); 916 917 switch (sd->sensor) { 918 case SENSOR_ICX098BQ: 919 ucbus_write(gspca_dev, icx098bq_start_0, 920 ARRAY_SIZE(icx098bq_start_0), 921 8); 922 ucbus_write(gspca_dev, icx098bq_start_1, 923 ARRAY_SIZE(icx098bq_start_1), 924 5); 925 ucbus_write(gspca_dev, icx098bq_start_2, 926 ARRAY_SIZE(icx098bq_start_2), 927 6); 928 msleep(50); 929 930 /* 1st start */ 931 send_start(gspca_dev); 932 gpio_set(sd, SQ930_GPIO_EXTRA2 | SQ930_GPIO_RSTBAR, 0x00ff); 933 msleep(70); 934 reg_w(gspca_dev, SQ930_CTRL_CAP_STOP, 0x0000); 935 gpio_set(sd, 0x7f, 0x00ff); 936 937 /* 2nd start */ 938 send_start(gspca_dev); 939 gpio_set(sd, SQ930_GPIO_EXTRA2 | SQ930_GPIO_RSTBAR, 0x00ff); 940 goto out; 941 case SENSOR_LZ24BP: 942 ucbus_write(gspca_dev, lz24bp_start_0, 943 ARRAY_SIZE(lz24bp_start_0), 944 8); 945 if (sd->type != Creative_live_motion) 946 ucbus_write(gspca_dev, lz24bp_start_1_gen, 947 ARRAY_SIZE(lz24bp_start_1_gen), 948 5); 949 else 950 ucbus_write(gspca_dev, lz24bp_start_1_clm, 951 ARRAY_SIZE(lz24bp_start_1_clm), 952 5); 953 ucbus_write(gspca_dev, lz24bp_start_2, 954 ARRAY_SIZE(lz24bp_start_2), 955 6); 956 mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; 957 lz24bp_ppl(sd, mode == 1 ? 0x0564 : 0x0310); 958 msleep(10); 959 break; 960 case SENSOR_MI0360: 961 ucbus_write(gspca_dev, mi0360_start_0, 962 ARRAY_SIZE(mi0360_start_0), 963 8); 964 i2c_write(sd, mi0360_init_23, 965 ARRAY_SIZE(mi0360_init_23)); 966 i2c_write(sd, mi0360_init_24, 967 ARRAY_SIZE(mi0360_init_24)); 968 i2c_write(sd, mi0360_init_25, 969 ARRAY_SIZE(mi0360_init_25)); 970 ucbus_write(gspca_dev, mi0360_start_1, 971 ARRAY_SIZE(mi0360_start_1), 972 5); 973 i2c_write(sd, mi0360_start_2, 974 ARRAY_SIZE(mi0360_start_2)); 975 i2c_write(sd, mi0360_start_3, 976 ARRAY_SIZE(mi0360_start_3)); 977 978 /* 1st start */ 979 send_start(gspca_dev); 980 msleep(60); 981 send_stop(gspca_dev); 982 983 i2c_write(sd, 984 mi0360_start_4, ARRAY_SIZE(mi0360_start_4)); 985 break; 986 default: 987/* case SENSOR_MT9V111: */ 988 ucbus_write(gspca_dev, mi0360_start_0, 989 ARRAY_SIZE(mi0360_start_0), 990 8); 991 i2c_write(sd, mt9v111_init_0, 992 ARRAY_SIZE(mt9v111_init_0)); 993 i2c_write(sd, mt9v111_init_1, 994 ARRAY_SIZE(mt9v111_init_1)); 995 i2c_write(sd, mt9v111_init_2, 996 ARRAY_SIZE(mt9v111_init_2)); 997 ucbus_write(gspca_dev, mt9v111_start_1, 998 ARRAY_SIZE(mt9v111_start_1), 999 5); 1000 i2c_write(sd, mt9v111_init_3, 1001 ARRAY_SIZE(mt9v111_init_3)); 1002 i2c_write(sd, mt9v111_init_4, 1003 ARRAY_SIZE(mt9v111_init_4)); 1004 break; 1005 } 1006 1007 send_start(gspca_dev); 1008out: 1009 msleep(1000); 1010 1011 if (sd->sensor == SENSOR_MT9V111) 1012 gpio_set(sd, SQ930_GPIO_DFL_LED, SQ930_GPIO_DFL_LED); 1013 1014 sd->do_ctrl = 1; /* set the exposure */ 1015 1016 return gspca_dev->usb_err; 1017} 1018 1019static void sd_stopN(struct gspca_dev *gspca_dev) 1020{ 1021 struct sd *sd = (struct sd *) gspca_dev; 1022 1023 if (sd->sensor == SENSOR_MT9V111) 1024 gpio_set(sd, 0, SQ930_GPIO_DFL_LED); 1025 send_stop(gspca_dev); 1026} 1027 1028/* function called when the application gets a new frame */ 1029/* It sets the exposure if required and restart the bulk transfer. */ 1030static void sd_dq_callback(struct gspca_dev *gspca_dev) 1031{ 1032 struct sd *sd = (struct sd *) gspca_dev; 1033 int ret; 1034 1035 if (!sd->do_ctrl || gspca_dev->cam.bulk_nurbs != 0) 1036 return; 1037 sd->do_ctrl = 0; 1038 1039 setexposure(gspca_dev, v4l2_ctrl_g_ctrl(sd->exposure), 1040 v4l2_ctrl_g_ctrl(sd->gain)); 1041 1042 gspca_dev->cam.bulk_nurbs = 1; 1043 ret = usb_submit_urb(gspca_dev->urb[0], GFP_KERNEL); 1044 if (ret < 0) 1045 pr_err("sd_dq_callback() err %d\n", ret); 1046 1047 /* wait a little time, otherwise the webcam crashes */ 1048 msleep(100); 1049} 1050 1051static void sd_pkt_scan(struct gspca_dev *gspca_dev, 1052 u8 *data, /* isoc packet */ 1053 int len) /* iso packet length */ 1054{ 1055 struct sd *sd = (struct sd *) gspca_dev; 1056 1057 if (sd->do_ctrl) 1058 gspca_dev->cam.bulk_nurbs = 0; 1059 gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0); 1060 gspca_frame_add(gspca_dev, INTER_PACKET, data, len - 8); 1061 gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); 1062} 1063 1064static int sd_s_ctrl(struct v4l2_ctrl *ctrl) 1065{ 1066 struct gspca_dev *gspca_dev = 1067 container_of(ctrl->handler, struct gspca_dev, ctrl_handler); 1068 struct sd *sd = (struct sd *) gspca_dev; 1069 1070 gspca_dev->usb_err = 0; 1071 1072 if (!gspca_dev->streaming) 1073 return 0; 1074 1075 switch (ctrl->id) { 1076 case V4L2_CID_EXPOSURE: 1077 setexposure(gspca_dev, ctrl->val, sd->gain->val); 1078 break; 1079 } 1080 return gspca_dev->usb_err; 1081} 1082 1083static const struct v4l2_ctrl_ops sd_ctrl_ops = { 1084 .s_ctrl = sd_s_ctrl, 1085}; 1086 1087static int sd_init_controls(struct gspca_dev *gspca_dev) 1088{ 1089 struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler; 1090 struct sd *sd = (struct sd *) gspca_dev; 1091 1092 gspca_dev->vdev.ctrl_handler = hdl; 1093 v4l2_ctrl_handler_init(hdl, 2); 1094 sd->exposure = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1095 V4L2_CID_EXPOSURE, 1, 0xfff, 1, 0x356); 1096 sd->gain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1097 V4L2_CID_GAIN, 1, 255, 1, 0x8d); 1098 1099 if (hdl->error) { 1100 pr_err("Could not initialize controls\n"); 1101 return hdl->error; 1102 } 1103 v4l2_ctrl_cluster(2, &sd->exposure); 1104 return 0; 1105} 1106 1107/* sub-driver description */ 1108static const struct sd_desc sd_desc = { 1109 .name = MODULE_NAME, 1110 .config = sd_config, 1111 .init = sd_init, 1112 .init_controls = sd_init_controls, 1113 .isoc_init = sd_isoc_init, 1114 .start = sd_start, 1115 .stopN = sd_stopN, 1116 .pkt_scan = sd_pkt_scan, 1117 .dq_callback = sd_dq_callback, 1118}; 1119 1120/* Table of supported USB devices */ 1121#define ST(sensor, type) \ 1122 .driver_info = (SENSOR_ ## sensor << 8) \ 1123 | (type) 1124static const struct usb_device_id device_table[] = { 1125 {USB_DEVICE(0x041e, 0x4038), ST(MI0360, 0)}, 1126 {USB_DEVICE(0x041e, 0x403c), ST(LZ24BP, 0)}, 1127 {USB_DEVICE(0x041e, 0x403d), ST(LZ24BP, 0)}, 1128 {USB_DEVICE(0x041e, 0x4041), ST(LZ24BP, Creative_live_motion)}, 1129 {USB_DEVICE(0x2770, 0x930b), ST(MI0360, 0)}, 1130 {USB_DEVICE(0x2770, 0x930c), ST(MI0360, 0)}, 1131 {} 1132}; 1133MODULE_DEVICE_TABLE(usb, device_table); 1134 1135 1136/* -- device connect -- */ 1137static int sd_probe(struct usb_interface *intf, 1138 const struct usb_device_id *id) 1139{ 1140 return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), 1141 THIS_MODULE); 1142} 1143 1144static struct usb_driver sd_driver = { 1145 .name = MODULE_NAME, 1146 .id_table = device_table, 1147 .probe = sd_probe, 1148 .disconnect = gspca_disconnect, 1149#ifdef CONFIG_PM 1150 .suspend = gspca_suspend, 1151 .resume = gspca_resume, 1152 .reset_resume = gspca_resume, 1153#endif 1154}; 1155 1156module_usb_driver(sd_driver); 1157