1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * cx18 ADEC audio functions 4 * 5 * Derived from cx25840-audio.c 6 * 7 * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> 8 * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net> 9 */ 10 11#include "cx18-driver.h" 12 13static int set_audclk_freq(struct cx18 *cx, u32 freq) 14{ 15 struct cx18_av_state *state = &cx->av_state; 16 17 if (freq != 32000 && freq != 44100 && freq != 48000) 18 return -EINVAL; 19 20 /* 21 * The PLL parameters are based on the external crystal frequency that 22 * would ideally be: 23 * 24 * NTSC Color subcarrier freq * 8 = 25 * 4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz 26 * 27 * The accidents of history and rationale that explain from where this 28 * combination of magic numbers originate can be found in: 29 * 30 * [1] Abrahams, I. C., "Choice of Chrominance Subcarrier Frequency in 31 * the NTSC Standards", Proceedings of the I-R-E, January 1954, pp 79-80 32 * 33 * [2] Abrahams, I. C., "The 'Frequency Interleaving' Principle in the 34 * NTSC Standards", Proceedings of the I-R-E, January 1954, pp 81-83 35 * 36 * As Mike Bradley has rightly pointed out, it's not the exact crystal 37 * frequency that matters, only that all parts of the driver and 38 * firmware are using the same value (close to the ideal value). 39 * 40 * Since I have a strong suspicion that, if the firmware ever assumes a 41 * crystal value at all, it will assume 28.636360 MHz, the crystal 42 * freq used in calculations in this driver will be: 43 * 44 * xtal_freq = 28.636360 MHz 45 * 46 * an error of less than 0.13 ppm which is way, way better than any off 47 * the shelf crystal will have for accuracy anyway. 48 * 49 * Below I aim to run the PLLs' VCOs near 400 MHz to minimize error. 50 * 51 * Many thanks to Jeff Campbell and Mike Bradley for their extensive 52 * investigation, experimentation, testing, and suggested solutions of 53 * audio/video sync problems with SVideo and CVBS captures. 54 */ 55 56 if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { 57 switch (freq) { 58 case 32000: 59 /* 60 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 61 * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x20 62 */ 63 cx18_av_write4(cx, 0x108, 0x200d040f); 64 65 /* VID_PLL Fraction = 0x2be2fe */ 66 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ 67 cx18_av_write4(cx, 0x10c, 0x002be2fe); 68 69 /* AUX_PLL Fraction = 0x176740c */ 70 /* xtal * 0xd.bb3a060/0x20 = 32000 * 384: 393 MHz p-pd*/ 71 cx18_av_write4(cx, 0x110, 0x0176740c); 72 73 /* src3/4/6_ctl */ 74 /* 0x1.f77f = (4 * xtal/8*2/455) / 32000 */ 75 cx18_av_write4(cx, 0x900, 0x0801f77f); 76 cx18_av_write4(cx, 0x904, 0x0801f77f); 77 cx18_av_write4(cx, 0x90c, 0x0801f77f); 78 79 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x20 */ 80 cx18_av_write(cx, 0x127, 0x60); 81 82 /* AUD_COUNT = 0x2fff = 8 samples * 4 * 384 - 1 */ 83 cx18_av_write4(cx, 0x12c, 0x11202fff); 84 85 /* 86 * EN_AV_LOCK = 0 87 * VID_COUNT = 0x0d2ef8 = 107999.000 * 8 = 88 * ((8 samples/32,000) * (13,500,000 * 8) * 4 - 1) * 8 89 */ 90 cx18_av_write4(cx, 0x128, 0xa00d2ef8); 91 break; 92 93 case 44100: 94 /* 95 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 96 * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x18 97 */ 98 cx18_av_write4(cx, 0x108, 0x180e040f); 99 100 /* VID_PLL Fraction = 0x2be2fe */ 101 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ 102 cx18_av_write4(cx, 0x10c, 0x002be2fe); 103 104 /* AUX_PLL Fraction = 0x062a1f2 */ 105 /* xtal * 0xe.3150f90/0x18 = 44100 * 384: 406 MHz p-pd*/ 106 cx18_av_write4(cx, 0x110, 0x0062a1f2); 107 108 /* src3/4/6_ctl */ 109 /* 0x1.6d59 = (4 * xtal/8*2/455) / 44100 */ 110 cx18_av_write4(cx, 0x900, 0x08016d59); 111 cx18_av_write4(cx, 0x904, 0x08016d59); 112 cx18_av_write4(cx, 0x90c, 0x08016d59); 113 114 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x18 */ 115 cx18_av_write(cx, 0x127, 0x58); 116 117 /* AUD_COUNT = 0x92ff = 49 samples * 2 * 384 - 1 */ 118 cx18_av_write4(cx, 0x12c, 0x112092ff); 119 120 /* 121 * EN_AV_LOCK = 0 122 * VID_COUNT = 0x1d4bf8 = 239999.000 * 8 = 123 * ((49 samples/44,100) * (13,500,000 * 8) * 2 - 1) * 8 124 */ 125 cx18_av_write4(cx, 0x128, 0xa01d4bf8); 126 break; 127 128 case 48000: 129 /* 130 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 131 * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x16 132 */ 133 cx18_av_write4(cx, 0x108, 0x160e040f); 134 135 /* VID_PLL Fraction = 0x2be2fe */ 136 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ 137 cx18_av_write4(cx, 0x10c, 0x002be2fe); 138 139 /* AUX_PLL Fraction = 0x05227ad */ 140 /* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz p-pd*/ 141 cx18_av_write4(cx, 0x110, 0x005227ad); 142 143 /* src3/4/6_ctl */ 144 /* 0x1.4faa = (4 * xtal/8*2/455) / 48000 */ 145 cx18_av_write4(cx, 0x900, 0x08014faa); 146 cx18_av_write4(cx, 0x904, 0x08014faa); 147 cx18_av_write4(cx, 0x90c, 0x08014faa); 148 149 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */ 150 cx18_av_write(cx, 0x127, 0x56); 151 152 /* AUD_COUNT = 0x5fff = 4 samples * 16 * 384 - 1 */ 153 cx18_av_write4(cx, 0x12c, 0x11205fff); 154 155 /* 156 * EN_AV_LOCK = 0 157 * VID_COUNT = 0x1193f8 = 143999.000 * 8 = 158 * ((4 samples/48,000) * (13,500,000 * 8) * 16 - 1) * 8 159 */ 160 cx18_av_write4(cx, 0x128, 0xa01193f8); 161 break; 162 } 163 } else { 164 switch (freq) { 165 case 32000: 166 /* 167 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 168 * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x30 169 */ 170 cx18_av_write4(cx, 0x108, 0x300d040f); 171 172 /* VID_PLL Fraction = 0x2be2fe */ 173 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ 174 cx18_av_write4(cx, 0x10c, 0x002be2fe); 175 176 /* AUX_PLL Fraction = 0x176740c */ 177 /* xtal * 0xd.bb3a060/0x30 = 32000 * 256: 393 MHz p-pd*/ 178 cx18_av_write4(cx, 0x110, 0x0176740c); 179 180 /* src1_ctl */ 181 /* 0x1.0000 = 32000/32000 */ 182 cx18_av_write4(cx, 0x8f8, 0x08010000); 183 184 /* src3/4/6_ctl */ 185 /* 0x2.0000 = 2 * (32000/32000) */ 186 cx18_av_write4(cx, 0x900, 0x08020000); 187 cx18_av_write4(cx, 0x904, 0x08020000); 188 cx18_av_write4(cx, 0x90c, 0x08020000); 189 190 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x30 */ 191 cx18_av_write(cx, 0x127, 0x70); 192 193 /* AUD_COUNT = 0x1fff = 8 samples * 4 * 256 - 1 */ 194 cx18_av_write4(cx, 0x12c, 0x11201fff); 195 196 /* 197 * EN_AV_LOCK = 0 198 * VID_COUNT = 0x0d2ef8 = 107999.000 * 8 = 199 * ((8 samples/32,000) * (13,500,000 * 8) * 4 - 1) * 8 200 */ 201 cx18_av_write4(cx, 0x128, 0xa00d2ef8); 202 break; 203 204 case 44100: 205 /* 206 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 207 * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x24 208 */ 209 cx18_av_write4(cx, 0x108, 0x240e040f); 210 211 /* VID_PLL Fraction = 0x2be2fe */ 212 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ 213 cx18_av_write4(cx, 0x10c, 0x002be2fe); 214 215 /* AUX_PLL Fraction = 0x062a1f2 */ 216 /* xtal * 0xe.3150f90/0x24 = 44100 * 256: 406 MHz p-pd*/ 217 cx18_av_write4(cx, 0x110, 0x0062a1f2); 218 219 /* src1_ctl */ 220 /* 0x1.60cd = 44100/32000 */ 221 cx18_av_write4(cx, 0x8f8, 0x080160cd); 222 223 /* src3/4/6_ctl */ 224 /* 0x1.7385 = 2 * (32000/44100) */ 225 cx18_av_write4(cx, 0x900, 0x08017385); 226 cx18_av_write4(cx, 0x904, 0x08017385); 227 cx18_av_write4(cx, 0x90c, 0x08017385); 228 229 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x24 */ 230 cx18_av_write(cx, 0x127, 0x64); 231 232 /* AUD_COUNT = 0x61ff = 49 samples * 2 * 256 - 1 */ 233 cx18_av_write4(cx, 0x12c, 0x112061ff); 234 235 /* 236 * EN_AV_LOCK = 0 237 * VID_COUNT = 0x1d4bf8 = 239999.000 * 8 = 238 * ((49 samples/44,100) * (13,500,000 * 8) * 2 - 1) * 8 239 */ 240 cx18_av_write4(cx, 0x128, 0xa01d4bf8); 241 break; 242 243 case 48000: 244 /* 245 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 246 * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x20 247 */ 248 cx18_av_write4(cx, 0x108, 0x200d040f); 249 250 /* VID_PLL Fraction = 0x2be2fe */ 251 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ 252 cx18_av_write4(cx, 0x10c, 0x002be2fe); 253 254 /* AUX_PLL Fraction = 0x176740c */ 255 /* xtal * 0xd.bb3a060/0x20 = 48000 * 256: 393 MHz p-pd*/ 256 cx18_av_write4(cx, 0x110, 0x0176740c); 257 258 /* src1_ctl */ 259 /* 0x1.8000 = 48000/32000 */ 260 cx18_av_write4(cx, 0x8f8, 0x08018000); 261 262 /* src3/4/6_ctl */ 263 /* 0x1.5555 = 2 * (32000/48000) */ 264 cx18_av_write4(cx, 0x900, 0x08015555); 265 cx18_av_write4(cx, 0x904, 0x08015555); 266 cx18_av_write4(cx, 0x90c, 0x08015555); 267 268 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x20 */ 269 cx18_av_write(cx, 0x127, 0x60); 270 271 /* AUD_COUNT = 0x3fff = 4 samples * 16 * 256 - 1 */ 272 cx18_av_write4(cx, 0x12c, 0x11203fff); 273 274 /* 275 * EN_AV_LOCK = 0 276 * VID_COUNT = 0x1193f8 = 143999.000 * 8 = 277 * ((4 samples/48,000) * (13,500,000 * 8) * 16 - 1) * 8 278 */ 279 cx18_av_write4(cx, 0x128, 0xa01193f8); 280 break; 281 } 282 } 283 284 state->audclk_freq = freq; 285 286 return 0; 287} 288 289void cx18_av_audio_set_path(struct cx18 *cx) 290{ 291 struct cx18_av_state *state = &cx->av_state; 292 u8 v; 293 294 /* stop microcontroller */ 295 v = cx18_av_read(cx, 0x803) & ~0x10; 296 cx18_av_write_expect(cx, 0x803, v, v, 0x1f); 297 298 /* assert soft reset */ 299 v = cx18_av_read(cx, 0x810) | 0x01; 300 cx18_av_write_expect(cx, 0x810, v, v, 0x0f); 301 302 /* Mute everything to prevent the PFFT! */ 303 cx18_av_write(cx, 0x8d3, 0x1f); 304 305 if (state->aud_input <= CX18_AV_AUDIO_SERIAL2) { 306 /* Set Path1 to Serial Audio Input */ 307 cx18_av_write4(cx, 0x8d0, 0x01011012); 308 309 /* The microcontroller should not be started for the 310 * non-tuner inputs: autodetection is specific for 311 * TV audio. */ 312 } else { 313 /* Set Path1 to Analog Demod Main Channel */ 314 cx18_av_write4(cx, 0x8d0, 0x1f063870); 315 } 316 317 set_audclk_freq(cx, state->audclk_freq); 318 319 /* deassert soft reset */ 320 v = cx18_av_read(cx, 0x810) & ~0x01; 321 cx18_av_write_expect(cx, 0x810, v, v, 0x0f); 322 323 if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { 324 /* When the microcontroller detects the 325 * audio format, it will unmute the lines */ 326 v = cx18_av_read(cx, 0x803) | 0x10; 327 cx18_av_write_expect(cx, 0x803, v, v, 0x1f); 328 } 329} 330 331static void set_volume(struct cx18 *cx, int volume) 332{ 333 /* First convert the volume to msp3400 values (0-127) */ 334 int vol = volume >> 9; 335 /* now scale it up to cx18_av values 336 * -114dB to -96dB maps to 0 337 * this should be 19, but in my testing that was 4dB too loud */ 338 if (vol <= 23) 339 vol = 0; 340 else 341 vol -= 23; 342 343 /* PATH1_VOLUME */ 344 cx18_av_write(cx, 0x8d4, 228 - (vol * 2)); 345} 346 347static void set_bass(struct cx18 *cx, int bass) 348{ 349 /* PATH1_EQ_BASS_VOL */ 350 cx18_av_and_or(cx, 0x8d9, ~0x3f, 48 - (bass * 48 / 0xffff)); 351} 352 353static void set_treble(struct cx18 *cx, int treble) 354{ 355 /* PATH1_EQ_TREBLE_VOL */ 356 cx18_av_and_or(cx, 0x8db, ~0x3f, 48 - (treble * 48 / 0xffff)); 357} 358 359static void set_balance(struct cx18 *cx, int balance) 360{ 361 int bal = balance >> 8; 362 if (bal > 0x80) { 363 /* PATH1_BAL_LEFT */ 364 cx18_av_and_or(cx, 0x8d5, 0x7f, 0x80); 365 /* PATH1_BAL_LEVEL */ 366 cx18_av_and_or(cx, 0x8d5, ~0x7f, bal & 0x7f); 367 } else { 368 /* PATH1_BAL_LEFT */ 369 cx18_av_and_or(cx, 0x8d5, 0x7f, 0x00); 370 /* PATH1_BAL_LEVEL */ 371 cx18_av_and_or(cx, 0x8d5, ~0x7f, 0x80 - bal); 372 } 373} 374 375static void set_mute(struct cx18 *cx, int mute) 376{ 377 struct cx18_av_state *state = &cx->av_state; 378 u8 v; 379 380 if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { 381 /* Must turn off microcontroller in order to mute sound. 382 * Not sure if this is the best method, but it does work. 383 * If the microcontroller is running, then it will undo any 384 * changes to the mute register. */ 385 v = cx18_av_read(cx, 0x803); 386 if (mute) { 387 /* disable microcontroller */ 388 v &= ~0x10; 389 cx18_av_write_expect(cx, 0x803, v, v, 0x1f); 390 cx18_av_write(cx, 0x8d3, 0x1f); 391 } else { 392 /* enable microcontroller */ 393 v |= 0x10; 394 cx18_av_write_expect(cx, 0x803, v, v, 0x1f); 395 } 396 } else { 397 /* SRC1_MUTE_EN */ 398 cx18_av_and_or(cx, 0x8d3, ~0x2, mute ? 0x02 : 0x00); 399 } 400} 401 402int cx18_av_s_clock_freq(struct v4l2_subdev *sd, u32 freq) 403{ 404 struct cx18 *cx = v4l2_get_subdevdata(sd); 405 struct cx18_av_state *state = &cx->av_state; 406 int retval; 407 u8 v; 408 409 if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { 410 v = cx18_av_read(cx, 0x803) & ~0x10; 411 cx18_av_write_expect(cx, 0x803, v, v, 0x1f); 412 cx18_av_write(cx, 0x8d3, 0x1f); 413 } 414 v = cx18_av_read(cx, 0x810) | 0x1; 415 cx18_av_write_expect(cx, 0x810, v, v, 0x0f); 416 417 retval = set_audclk_freq(cx, freq); 418 419 v = cx18_av_read(cx, 0x810) & ~0x1; 420 cx18_av_write_expect(cx, 0x810, v, v, 0x0f); 421 if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { 422 v = cx18_av_read(cx, 0x803) | 0x10; 423 cx18_av_write_expect(cx, 0x803, v, v, 0x1f); 424 } 425 return retval; 426} 427 428static int cx18_av_audio_s_ctrl(struct v4l2_ctrl *ctrl) 429{ 430 struct v4l2_subdev *sd = to_sd(ctrl); 431 struct cx18 *cx = v4l2_get_subdevdata(sd); 432 433 switch (ctrl->id) { 434 case V4L2_CID_AUDIO_VOLUME: 435 set_volume(cx, ctrl->val); 436 break; 437 case V4L2_CID_AUDIO_BASS: 438 set_bass(cx, ctrl->val); 439 break; 440 case V4L2_CID_AUDIO_TREBLE: 441 set_treble(cx, ctrl->val); 442 break; 443 case V4L2_CID_AUDIO_BALANCE: 444 set_balance(cx, ctrl->val); 445 break; 446 case V4L2_CID_AUDIO_MUTE: 447 set_mute(cx, ctrl->val); 448 break; 449 default: 450 return -EINVAL; 451 } 452 return 0; 453} 454 455const struct v4l2_ctrl_ops cx18_av_audio_ctrl_ops = { 456 .s_ctrl = cx18_av_audio_s_ctrl, 457}; 458