1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2005-2006 Micronas USA Inc.
4 */
5
6#include <linux/module.h>
7#include <linux/init.h>
8#include <linux/i2c.h>
9#include <linux/videodev2.h>
10#include <linux/ioctl.h>
11#include <media/v4l2-device.h>
12#include <media/v4l2-ctrls.h>
13#include <linux/slab.h>
14
15MODULE_DESCRIPTION("TW9903 I2C subdev driver");
16MODULE_LICENSE("GPL v2");
17
18/*
19 * This driver is based on the wis-tw9903.c source that was in
20 * drivers/staging/media/go7007. That source had commented out code for
21 * saturation and scaling (neither seemed to work). If anyone ever gets
22 * hardware to test this driver, then that code might be useful to look at.
23 * You need to get the kernel sources of, say, kernel 3.8 where that
24 * wis-tw9903 driver is still present.
25 */
26
27struct tw9903 {
28	struct v4l2_subdev sd;
29	struct v4l2_ctrl_handler hdl;
30	v4l2_std_id norm;
31};
32
33static inline struct tw9903 *to_state(struct v4l2_subdev *sd)
34{
35	return container_of(sd, struct tw9903, sd);
36}
37
38static const u8 initial_registers[] = {
39	0x02, 0x44, /* input 1, composite */
40	0x03, 0x92, /* correct digital format */
41	0x04, 0x00,
42	0x05, 0x80, /* or 0x00 for PAL */
43	0x06, 0x40, /* second internal current reference */
44	0x07, 0x02, /* window */
45	0x08, 0x14, /* window */
46	0x09, 0xf0, /* window */
47	0x0a, 0x81, /* window */
48	0x0b, 0xd0, /* window */
49	0x0c, 0x8c,
50	0x0d, 0x00, /* scaling */
51	0x0e, 0x11, /* scaling */
52	0x0f, 0x00, /* scaling */
53	0x10, 0x00, /* brightness */
54	0x11, 0x60, /* contrast */
55	0x12, 0x01, /* sharpness */
56	0x13, 0x7f, /* U gain */
57	0x14, 0x5a, /* V gain */
58	0x15, 0x00, /* hue */
59	0x16, 0xc3, /* sharpness */
60	0x18, 0x00,
61	0x19, 0x58, /* vbi */
62	0x1a, 0x80,
63	0x1c, 0x0f, /* video norm */
64	0x1d, 0x7f, /* video norm */
65	0x20, 0xa0, /* clamping gain (working 0x50) */
66	0x21, 0x22,
67	0x22, 0xf0,
68	0x23, 0xfe,
69	0x24, 0x3c,
70	0x25, 0x38,
71	0x26, 0x44,
72	0x27, 0x20,
73	0x28, 0x00,
74	0x29, 0x15,
75	0x2a, 0xa0,
76	0x2b, 0x44,
77	0x2c, 0x37,
78	0x2d, 0x00,
79	0x2e, 0xa5, /* burst PLL control (working: a9) */
80	0x2f, 0xe0, /* 0xea is blue test frame -- 0xe0 for normal */
81	0x31, 0x00,
82	0x33, 0x22,
83	0x34, 0x11,
84	0x35, 0x35,
85	0x3b, 0x05,
86	0x06, 0xc0, /* reset device */
87	0x00, 0x00, /* Terminator (reg 0x00 is read-only) */
88};
89
90static int write_reg(struct v4l2_subdev *sd, u8 reg, u8 value)
91{
92	struct i2c_client *client = v4l2_get_subdevdata(sd);
93
94	return i2c_smbus_write_byte_data(client, reg, value);
95}
96
97static int write_regs(struct v4l2_subdev *sd, const u8 *regs)
98{
99	int i;
100
101	for (i = 0; regs[i] != 0x00; i += 2)
102		if (write_reg(sd, regs[i], regs[i + 1]) < 0)
103			return -1;
104	return 0;
105}
106
107static int tw9903_s_video_routing(struct v4l2_subdev *sd, u32 input,
108				      u32 output, u32 config)
109{
110	write_reg(sd, 0x02, 0x40 | (input << 1));
111	return 0;
112}
113
114static int tw9903_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
115{
116	struct tw9903 *dec = to_state(sd);
117	bool is_60hz = norm & V4L2_STD_525_60;
118	static const u8 config_60hz[] = {
119		0x05, 0x80,
120		0x07, 0x02,
121		0x08, 0x14,
122		0x09, 0xf0,
123		0,    0,
124	};
125	static const u8 config_50hz[] = {
126		0x05, 0x00,
127		0x07, 0x12,
128		0x08, 0x18,
129		0x09, 0x20,
130		0,    0,
131	};
132
133	write_regs(sd, is_60hz ? config_60hz : config_50hz);
134	dec->norm = norm;
135	return 0;
136}
137
138
139static int tw9903_s_ctrl(struct v4l2_ctrl *ctrl)
140{
141	struct tw9903 *dec = container_of(ctrl->handler, struct tw9903, hdl);
142	struct v4l2_subdev *sd = &dec->sd;
143
144	switch (ctrl->id) {
145	case V4L2_CID_BRIGHTNESS:
146		write_reg(sd, 0x10, ctrl->val);
147		break;
148	case V4L2_CID_CONTRAST:
149		write_reg(sd, 0x11, ctrl->val);
150		break;
151	case V4L2_CID_HUE:
152		write_reg(sd, 0x15, ctrl->val);
153		break;
154	default:
155		return -EINVAL;
156	}
157	return 0;
158}
159
160static int tw9903_log_status(struct v4l2_subdev *sd)
161{
162	struct tw9903 *dec = to_state(sd);
163	bool is_60hz = dec->norm & V4L2_STD_525_60;
164
165	v4l2_info(sd, "Standard: %d Hz\n", is_60hz ? 60 : 50);
166	v4l2_ctrl_subdev_log_status(sd);
167	return 0;
168}
169
170/* --------------------------------------------------------------------------*/
171
172static const struct v4l2_ctrl_ops tw9903_ctrl_ops = {
173	.s_ctrl = tw9903_s_ctrl,
174};
175
176static const struct v4l2_subdev_core_ops tw9903_core_ops = {
177	.log_status = tw9903_log_status,
178};
179
180static const struct v4l2_subdev_video_ops tw9903_video_ops = {
181	.s_std = tw9903_s_std,
182	.s_routing = tw9903_s_video_routing,
183};
184
185static const struct v4l2_subdev_ops tw9903_ops = {
186	.core = &tw9903_core_ops,
187	.video = &tw9903_video_ops,
188};
189
190/* --------------------------------------------------------------------------*/
191
192static int tw9903_probe(struct i2c_client *client)
193{
194	struct tw9903 *dec;
195	struct v4l2_subdev *sd;
196	struct v4l2_ctrl_handler *hdl;
197
198	/* Check if the adapter supports the needed features */
199	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
200		return -EIO;
201
202	v4l_info(client, "chip found @ 0x%02x (%s)\n",
203			client->addr << 1, client->adapter->name);
204
205	dec = devm_kzalloc(&client->dev, sizeof(*dec), GFP_KERNEL);
206	if (dec == NULL)
207		return -ENOMEM;
208	sd = &dec->sd;
209	v4l2_i2c_subdev_init(sd, client, &tw9903_ops);
210	hdl = &dec->hdl;
211	v4l2_ctrl_handler_init(hdl, 4);
212	v4l2_ctrl_new_std(hdl, &tw9903_ctrl_ops,
213		V4L2_CID_BRIGHTNESS, -128, 127, 1, 0);
214	v4l2_ctrl_new_std(hdl, &tw9903_ctrl_ops,
215		V4L2_CID_CONTRAST, 0, 255, 1, 0x60);
216	v4l2_ctrl_new_std(hdl, &tw9903_ctrl_ops,
217		V4L2_CID_HUE, -128, 127, 1, 0);
218	sd->ctrl_handler = hdl;
219	if (hdl->error) {
220		int err = hdl->error;
221
222		v4l2_ctrl_handler_free(hdl);
223		return err;
224	}
225
226	/* Initialize tw9903 */
227	dec->norm = V4L2_STD_NTSC;
228
229	if (write_regs(sd, initial_registers) < 0) {
230		v4l2_err(client, "error initializing TW9903\n");
231		return -EINVAL;
232	}
233
234	return 0;
235}
236
237static void tw9903_remove(struct i2c_client *client)
238{
239	struct v4l2_subdev *sd = i2c_get_clientdata(client);
240
241	v4l2_device_unregister_subdev(sd);
242	v4l2_ctrl_handler_free(&to_state(sd)->hdl);
243}
244
245/* ----------------------------------------------------------------------- */
246
247static const struct i2c_device_id tw9903_id[] = {
248	{ "tw9903", 0 },
249	{ }
250};
251MODULE_DEVICE_TABLE(i2c, tw9903_id);
252
253static struct i2c_driver tw9903_driver = {
254	.driver = {
255		.name	= "tw9903",
256	},
257	.probe = tw9903_probe,
258	.remove = tw9903_remove,
259	.id_table = tw9903_id,
260};
261module_i2c_driver(tw9903_driver);
262