1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Samsung S5K6A3 image sensor driver
4 *
5 * Copyright (C) 2013 Samsung Electronics Co., Ltd.
6 * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
7 */
8
9#include <linux/clk.h>
10#include <linux/delay.h>
11#include <linux/device.h>
12#include <linux/err.h>
13#include <linux/errno.h>
14#include <linux/gpio/consumer.h>
15#include <linux/i2c.h>
16#include <linux/kernel.h>
17#include <linux/module.h>
18#include <linux/pm_runtime.h>
19#include <linux/regulator/consumer.h>
20#include <linux/slab.h>
21#include <linux/videodev2.h>
22#include <media/v4l2-async.h>
23#include <media/v4l2-subdev.h>
24
25#define S5K6A3_SENSOR_MAX_WIDTH		1412
26#define S5K6A3_SENSOR_MAX_HEIGHT	1412
27#define S5K6A3_SENSOR_MIN_WIDTH		32
28#define S5K6A3_SENSOR_MIN_HEIGHT	32
29
30#define S5K6A3_DEFAULT_WIDTH		1296
31#define S5K6A3_DEFAULT_HEIGHT		732
32
33#define S5K6A3_DRV_NAME			"S5K6A3"
34#define S5K6A3_CLK_NAME			"extclk"
35#define S5K6A3_DEFAULT_CLK_FREQ		24000000U
36
37enum {
38	S5K6A3_SUPP_VDDA,
39	S5K6A3_SUPP_VDDIO,
40	S5K6A3_SUPP_AFVDD,
41	S5K6A3_NUM_SUPPLIES,
42};
43
44/**
45 * struct s5k6a3 - fimc-is sensor data structure
46 * @dev: pointer to this I2C client device structure
47 * @subdev: the image sensor's v4l2 subdev
48 * @pad: subdev media source pad
49 * @supplies: image sensor's voltage regulator supplies
50 * @gpio_reset: GPIO connected to the sensor's reset pin
51 * @lock: mutex protecting the structure's members below
52 * @format: media bus format at the sensor's source pad
53 * @clock: pointer to &struct clk.
54 * @clock_frequency: clock frequency
55 * @power_count: stores state if device is powered
56 */
57struct s5k6a3 {
58	struct device *dev;
59	struct v4l2_subdev subdev;
60	struct media_pad pad;
61	struct regulator_bulk_data supplies[S5K6A3_NUM_SUPPLIES];
62	struct gpio_desc *gpio_reset;
63	struct mutex lock;
64	struct v4l2_mbus_framefmt format;
65	struct clk *clock;
66	u32 clock_frequency;
67	int power_count;
68};
69
70static const char * const s5k6a3_supply_names[] = {
71	[S5K6A3_SUPP_VDDA]	= "svdda",
72	[S5K6A3_SUPP_VDDIO]	= "svddio",
73	[S5K6A3_SUPP_AFVDD]	= "afvdd",
74};
75
76static inline struct s5k6a3 *sd_to_s5k6a3(struct v4l2_subdev *sd)
77{
78	return container_of(sd, struct s5k6a3, subdev);
79}
80
81static const struct v4l2_mbus_framefmt s5k6a3_formats[] = {
82	{
83		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
84		.colorspace = V4L2_COLORSPACE_SRGB,
85		.field = V4L2_FIELD_NONE,
86	}
87};
88
89static const struct v4l2_mbus_framefmt *find_sensor_format(
90	struct v4l2_mbus_framefmt *mf)
91{
92	int i;
93
94	for (i = 0; i < ARRAY_SIZE(s5k6a3_formats); i++)
95		if (mf->code == s5k6a3_formats[i].code)
96			return &s5k6a3_formats[i];
97
98	return &s5k6a3_formats[0];
99}
100
101static int s5k6a3_enum_mbus_code(struct v4l2_subdev *sd,
102				  struct v4l2_subdev_state *sd_state,
103				  struct v4l2_subdev_mbus_code_enum *code)
104{
105	if (code->index >= ARRAY_SIZE(s5k6a3_formats))
106		return -EINVAL;
107
108	code->code = s5k6a3_formats[code->index].code;
109	return 0;
110}
111
112static void s5k6a3_try_format(struct v4l2_mbus_framefmt *mf)
113{
114	const struct v4l2_mbus_framefmt *fmt;
115
116	fmt = find_sensor_format(mf);
117	mf->code = fmt->code;
118	mf->field = V4L2_FIELD_NONE;
119	v4l_bound_align_image(&mf->width, S5K6A3_SENSOR_MIN_WIDTH,
120			      S5K6A3_SENSOR_MAX_WIDTH, 0,
121			      &mf->height, S5K6A3_SENSOR_MIN_HEIGHT,
122			      S5K6A3_SENSOR_MAX_HEIGHT, 0, 0);
123}
124
125static struct v4l2_mbus_framefmt *__s5k6a3_get_format(
126		struct s5k6a3 *sensor, struct v4l2_subdev_state *sd_state,
127		u32 pad, enum v4l2_subdev_format_whence which)
128{
129	if (which == V4L2_SUBDEV_FORMAT_TRY)
130		return sd_state ? v4l2_subdev_state_get_format(sd_state, pad) : NULL;
131
132	return &sensor->format;
133}
134
135static int s5k6a3_set_fmt(struct v4l2_subdev *sd,
136				  struct v4l2_subdev_state *sd_state,
137				  struct v4l2_subdev_format *fmt)
138{
139	struct s5k6a3 *sensor = sd_to_s5k6a3(sd);
140	struct v4l2_mbus_framefmt *mf;
141
142	s5k6a3_try_format(&fmt->format);
143
144	mf = __s5k6a3_get_format(sensor, sd_state, fmt->pad, fmt->which);
145	if (mf) {
146		mutex_lock(&sensor->lock);
147		*mf = fmt->format;
148		mutex_unlock(&sensor->lock);
149	}
150	return 0;
151}
152
153static int s5k6a3_get_fmt(struct v4l2_subdev *sd,
154			  struct v4l2_subdev_state *sd_state,
155			  struct v4l2_subdev_format *fmt)
156{
157	struct s5k6a3 *sensor = sd_to_s5k6a3(sd);
158	struct v4l2_mbus_framefmt *mf;
159
160	mf = __s5k6a3_get_format(sensor, sd_state, fmt->pad, fmt->which);
161
162	mutex_lock(&sensor->lock);
163	fmt->format = *mf;
164	mutex_unlock(&sensor->lock);
165	return 0;
166}
167
168static const struct v4l2_subdev_pad_ops s5k6a3_pad_ops = {
169	.enum_mbus_code	= s5k6a3_enum_mbus_code,
170	.get_fmt	= s5k6a3_get_fmt,
171	.set_fmt	= s5k6a3_set_fmt,
172};
173
174static int s5k6a3_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
175{
176	struct v4l2_mbus_framefmt *format = v4l2_subdev_state_get_format(fh->state,
177									 0);
178
179	*format		= s5k6a3_formats[0];
180	format->width	= S5K6A3_DEFAULT_WIDTH;
181	format->height	= S5K6A3_DEFAULT_HEIGHT;
182
183	return 0;
184}
185
186static const struct v4l2_subdev_internal_ops s5k6a3_sd_internal_ops = {
187	.open = s5k6a3_open,
188};
189
190static int __s5k6a3_power_on(struct s5k6a3 *sensor)
191{
192	int i = S5K6A3_SUPP_VDDA;
193	int ret;
194
195	ret = clk_set_rate(sensor->clock, sensor->clock_frequency);
196	if (ret < 0)
197		return ret;
198
199	ret = pm_runtime_get(sensor->dev);
200	if (ret < 0)
201		goto error_rpm_put;
202
203	ret = regulator_enable(sensor->supplies[i].consumer);
204	if (ret < 0)
205		goto error_rpm_put;
206
207	ret = clk_prepare_enable(sensor->clock);
208	if (ret < 0)
209		goto error_reg_dis;
210
211	for (i++; i < S5K6A3_NUM_SUPPLIES; i++) {
212		ret = regulator_enable(sensor->supplies[i].consumer);
213		if (ret < 0)
214			goto error_clk;
215	}
216
217	gpiod_set_value_cansleep(sensor->gpio_reset, 0);
218	usleep_range(600, 800);
219	gpiod_set_value_cansleep(sensor->gpio_reset, 1);
220	usleep_range(600, 800);
221	gpiod_set_value_cansleep(sensor->gpio_reset, 0);
222
223	/* Delay needed for the sensor initialization */
224	msleep(20);
225	return 0;
226
227error_clk:
228	clk_disable_unprepare(sensor->clock);
229error_reg_dis:
230	for (--i; i >= 0; --i)
231		regulator_disable(sensor->supplies[i].consumer);
232error_rpm_put:
233	pm_runtime_put(sensor->dev);
234	return ret;
235}
236
237static int __s5k6a3_power_off(struct s5k6a3 *sensor)
238{
239	int i;
240
241	gpiod_set_value_cansleep(sensor->gpio_reset, 1);
242
243	for (i = S5K6A3_NUM_SUPPLIES - 1; i >= 0; i--)
244		regulator_disable(sensor->supplies[i].consumer);
245
246	clk_disable_unprepare(sensor->clock);
247	pm_runtime_put(sensor->dev);
248	return 0;
249}
250
251static int s5k6a3_s_power(struct v4l2_subdev *sd, int on)
252{
253	struct s5k6a3 *sensor = sd_to_s5k6a3(sd);
254	int ret = 0;
255
256	mutex_lock(&sensor->lock);
257
258	if (sensor->power_count == !on) {
259		if (on)
260			ret = __s5k6a3_power_on(sensor);
261		else
262			ret = __s5k6a3_power_off(sensor);
263
264		if (ret == 0)
265			sensor->power_count += on ? 1 : -1;
266	}
267
268	mutex_unlock(&sensor->lock);
269	return ret;
270}
271
272static const struct v4l2_subdev_core_ops s5k6a3_core_ops = {
273	.s_power = s5k6a3_s_power,
274};
275
276static const struct v4l2_subdev_ops s5k6a3_subdev_ops = {
277	.core = &s5k6a3_core_ops,
278	.pad = &s5k6a3_pad_ops,
279};
280
281static int s5k6a3_probe(struct i2c_client *client)
282{
283	struct device *dev = &client->dev;
284	struct s5k6a3 *sensor;
285	struct v4l2_subdev *sd;
286	int i, ret;
287
288	sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
289	if (!sensor)
290		return -ENOMEM;
291
292	mutex_init(&sensor->lock);
293	sensor->dev = dev;
294
295	sensor->clock = devm_clk_get(sensor->dev, S5K6A3_CLK_NAME);
296	if (IS_ERR(sensor->clock))
297		return PTR_ERR(sensor->clock);
298
299	sensor->gpio_reset = devm_gpiod_get(dev, NULL, GPIOD_OUT_HIGH);
300	ret = PTR_ERR_OR_ZERO(sensor->gpio_reset);
301	if (ret)
302		return ret;
303
304	if (of_property_read_u32(dev->of_node, "clock-frequency",
305				 &sensor->clock_frequency)) {
306		sensor->clock_frequency = S5K6A3_DEFAULT_CLK_FREQ;
307		dev_info(dev, "using default %u Hz clock frequency\n",
308					sensor->clock_frequency);
309	}
310
311	for (i = 0; i < S5K6A3_NUM_SUPPLIES; i++)
312		sensor->supplies[i].supply = s5k6a3_supply_names[i];
313
314	ret = devm_regulator_bulk_get(&client->dev, S5K6A3_NUM_SUPPLIES,
315				      sensor->supplies);
316	if (ret < 0)
317		return ret;
318
319	sd = &sensor->subdev;
320	v4l2_i2c_subdev_init(sd, client, &s5k6a3_subdev_ops);
321	sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
322	sd->internal_ops = &s5k6a3_sd_internal_ops;
323
324	sensor->format.code = s5k6a3_formats[0].code;
325	sensor->format.width = S5K6A3_DEFAULT_WIDTH;
326	sensor->format.height = S5K6A3_DEFAULT_HEIGHT;
327
328	sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
329	sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
330	ret = media_entity_pads_init(&sd->entity, 1, &sensor->pad);
331	if (ret < 0)
332		return ret;
333
334	pm_runtime_no_callbacks(dev);
335	pm_runtime_enable(dev);
336
337	ret = v4l2_async_register_subdev(sd);
338
339	if (ret < 0) {
340		pm_runtime_disable(&client->dev);
341		media_entity_cleanup(&sd->entity);
342	}
343
344	return ret;
345}
346
347static void s5k6a3_remove(struct i2c_client *client)
348{
349	struct v4l2_subdev *sd = i2c_get_clientdata(client);
350
351	pm_runtime_disable(&client->dev);
352	v4l2_async_unregister_subdev(sd);
353	media_entity_cleanup(&sd->entity);
354}
355
356static const struct i2c_device_id s5k6a3_ids[] = {
357	{ }
358};
359MODULE_DEVICE_TABLE(i2c, s5k6a3_ids);
360
361#ifdef CONFIG_OF
362static const struct of_device_id s5k6a3_of_match[] = {
363	{ .compatible = "samsung,s5k6a3" },
364	{ /* sentinel */ }
365};
366MODULE_DEVICE_TABLE(of, s5k6a3_of_match);
367#endif
368
369static struct i2c_driver s5k6a3_driver = {
370	.driver = {
371		.of_match_table	= of_match_ptr(s5k6a3_of_match),
372		.name		= S5K6A3_DRV_NAME,
373	},
374	.probe		= s5k6a3_probe,
375	.remove		= s5k6a3_remove,
376	.id_table	= s5k6a3_ids,
377};
378
379module_i2c_driver(s5k6a3_driver);
380
381MODULE_DESCRIPTION("S5K6A3 image sensor subdev driver");
382MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
383MODULE_LICENSE("GPL v2");
384