1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Driver for MT9M001 CMOS Image Sensor from Micron 4 * 5 * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> 6 */ 7 8#include <linux/clk.h> 9#include <linux/delay.h> 10#include <linux/gpio/consumer.h> 11#include <linux/i2c.h> 12#include <linux/log2.h> 13#include <linux/module.h> 14#include <linux/pm_runtime.h> 15#include <linux/slab.h> 16#include <linux/videodev2.h> 17 18#include <media/v4l2-ctrls.h> 19#include <media/v4l2-device.h> 20#include <media/v4l2-event.h> 21#include <media/v4l2-subdev.h> 22 23/* 24 * mt9m001 i2c address 0x5d 25 */ 26 27/* mt9m001 selected register addresses */ 28#define MT9M001_CHIP_VERSION 0x00 29#define MT9M001_ROW_START 0x01 30#define MT9M001_COLUMN_START 0x02 31#define MT9M001_WINDOW_HEIGHT 0x03 32#define MT9M001_WINDOW_WIDTH 0x04 33#define MT9M001_HORIZONTAL_BLANKING 0x05 34#define MT9M001_VERTICAL_BLANKING 0x06 35#define MT9M001_OUTPUT_CONTROL 0x07 36#define MT9M001_SHUTTER_WIDTH 0x09 37#define MT9M001_FRAME_RESTART 0x0b 38#define MT9M001_SHUTTER_DELAY 0x0c 39#define MT9M001_RESET 0x0d 40#define MT9M001_READ_OPTIONS1 0x1e 41#define MT9M001_READ_OPTIONS2 0x20 42#define MT9M001_GLOBAL_GAIN 0x35 43#define MT9M001_CHIP_ENABLE 0xF1 44 45#define MT9M001_MAX_WIDTH 1280 46#define MT9M001_MAX_HEIGHT 1024 47#define MT9M001_MIN_WIDTH 48 48#define MT9M001_MIN_HEIGHT 32 49#define MT9M001_COLUMN_SKIP 20 50#define MT9M001_ROW_SKIP 12 51#define MT9M001_DEFAULT_HBLANK 9 52#define MT9M001_DEFAULT_VBLANK 25 53 54/* MT9M001 has only one fixed colorspace per pixelcode */ 55struct mt9m001_datafmt { 56 u32 code; 57 enum v4l2_colorspace colorspace; 58}; 59 60/* Find a data format by a pixel code in an array */ 61static const struct mt9m001_datafmt *mt9m001_find_datafmt( 62 u32 code, const struct mt9m001_datafmt *fmt, 63 int n) 64{ 65 int i; 66 for (i = 0; i < n; i++) 67 if (fmt[i].code == code) 68 return fmt + i; 69 70 return NULL; 71} 72 73static const struct mt9m001_datafmt mt9m001_colour_fmts[] = { 74 /* 75 * Order important: first natively supported, 76 * second supported with a GPIO extender 77 */ 78 {MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_COLORSPACE_SRGB}, 79 {MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB}, 80}; 81 82static const struct mt9m001_datafmt mt9m001_monochrome_fmts[] = { 83 /* Order important - see above */ 84 {MEDIA_BUS_FMT_Y10_1X10, V4L2_COLORSPACE_JPEG}, 85 {MEDIA_BUS_FMT_Y8_1X8, V4L2_COLORSPACE_JPEG}, 86}; 87 88struct mt9m001 { 89 struct v4l2_subdev subdev; 90 struct v4l2_ctrl_handler hdl; 91 struct { 92 /* exposure/auto-exposure cluster */ 93 struct v4l2_ctrl *autoexposure; 94 struct v4l2_ctrl *exposure; 95 }; 96 struct mutex mutex; 97 struct v4l2_rect rect; /* Sensor window */ 98 struct clk *clk; 99 struct gpio_desc *standby_gpio; 100 struct gpio_desc *reset_gpio; 101 const struct mt9m001_datafmt *fmt; 102 const struct mt9m001_datafmt *fmts; 103 int num_fmts; 104 unsigned int total_h; 105 unsigned short y_skip_top; /* Lines to skip at the top */ 106 struct media_pad pad; 107}; 108 109static struct mt9m001 *to_mt9m001(const struct i2c_client *client) 110{ 111 return container_of(i2c_get_clientdata(client), struct mt9m001, subdev); 112} 113 114static int reg_read(struct i2c_client *client, const u8 reg) 115{ 116 return i2c_smbus_read_word_swapped(client, reg); 117} 118 119static int reg_write(struct i2c_client *client, const u8 reg, 120 const u16 data) 121{ 122 return i2c_smbus_write_word_swapped(client, reg, data); 123} 124 125static int reg_set(struct i2c_client *client, const u8 reg, 126 const u16 data) 127{ 128 int ret; 129 130 ret = reg_read(client, reg); 131 if (ret < 0) 132 return ret; 133 return reg_write(client, reg, ret | data); 134} 135 136static int reg_clear(struct i2c_client *client, const u8 reg, 137 const u16 data) 138{ 139 int ret; 140 141 ret = reg_read(client, reg); 142 if (ret < 0) 143 return ret; 144 return reg_write(client, reg, ret & ~data); 145} 146 147struct mt9m001_reg { 148 u8 reg; 149 u16 data; 150}; 151 152static int multi_reg_write(struct i2c_client *client, 153 const struct mt9m001_reg *regs, int num) 154{ 155 int i; 156 157 for (i = 0; i < num; i++) { 158 int ret = reg_write(client, regs[i].reg, regs[i].data); 159 160 if (ret) 161 return ret; 162 } 163 164 return 0; 165} 166 167static int mt9m001_init(struct i2c_client *client) 168{ 169 static const struct mt9m001_reg init_regs[] = { 170 /* 171 * Issue a soft reset. This returns all registers to their 172 * default values. 173 */ 174 { MT9M001_RESET, 1 }, 175 { MT9M001_RESET, 0 }, 176 /* Disable chip, synchronous option update */ 177 { MT9M001_OUTPUT_CONTROL, 0 } 178 }; 179 180 dev_dbg(&client->dev, "%s\n", __func__); 181 182 return multi_reg_write(client, init_regs, ARRAY_SIZE(init_regs)); 183} 184 185static int mt9m001_apply_selection(struct v4l2_subdev *sd) 186{ 187 struct i2c_client *client = v4l2_get_subdevdata(sd); 188 struct mt9m001 *mt9m001 = to_mt9m001(client); 189 const struct mt9m001_reg regs[] = { 190 /* Blanking and start values - default... */ 191 { MT9M001_HORIZONTAL_BLANKING, MT9M001_DEFAULT_HBLANK }, 192 { MT9M001_VERTICAL_BLANKING, MT9M001_DEFAULT_VBLANK }, 193 /* 194 * The caller provides a supported format, as verified per 195 * call to .set_fmt(FORMAT_TRY). 196 */ 197 { MT9M001_COLUMN_START, mt9m001->rect.left }, 198 { MT9M001_ROW_START, mt9m001->rect.top }, 199 { MT9M001_WINDOW_WIDTH, mt9m001->rect.width - 1 }, 200 { MT9M001_WINDOW_HEIGHT, 201 mt9m001->rect.height + mt9m001->y_skip_top - 1 }, 202 }; 203 204 return multi_reg_write(client, regs, ARRAY_SIZE(regs)); 205} 206 207static int mt9m001_s_stream(struct v4l2_subdev *sd, int enable) 208{ 209 struct i2c_client *client = v4l2_get_subdevdata(sd); 210 struct mt9m001 *mt9m001 = to_mt9m001(client); 211 int ret = 0; 212 213 mutex_lock(&mt9m001->mutex); 214 215 if (enable) { 216 ret = pm_runtime_resume_and_get(&client->dev); 217 if (ret < 0) 218 goto unlock; 219 220 ret = mt9m001_apply_selection(sd); 221 if (ret) 222 goto put_unlock; 223 224 ret = __v4l2_ctrl_handler_setup(&mt9m001->hdl); 225 if (ret) 226 goto put_unlock; 227 228 /* Switch to master "normal" mode */ 229 ret = reg_write(client, MT9M001_OUTPUT_CONTROL, 2); 230 if (ret < 0) 231 goto put_unlock; 232 } else { 233 /* Switch to master stop sensor readout */ 234 reg_write(client, MT9M001_OUTPUT_CONTROL, 0); 235 pm_runtime_put(&client->dev); 236 } 237 238 mutex_unlock(&mt9m001->mutex); 239 240 return 0; 241 242put_unlock: 243 pm_runtime_put(&client->dev); 244unlock: 245 mutex_unlock(&mt9m001->mutex); 246 247 return ret; 248} 249 250static int mt9m001_set_selection(struct v4l2_subdev *sd, 251 struct v4l2_subdev_state *sd_state, 252 struct v4l2_subdev_selection *sel) 253{ 254 struct i2c_client *client = v4l2_get_subdevdata(sd); 255 struct mt9m001 *mt9m001 = to_mt9m001(client); 256 struct v4l2_rect rect = sel->r; 257 258 if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE || 259 sel->target != V4L2_SEL_TGT_CROP) 260 return -EINVAL; 261 262 if (mt9m001->fmts == mt9m001_colour_fmts) 263 /* 264 * Bayer format - even number of rows for simplicity, 265 * but let the user play with the top row. 266 */ 267 rect.height = ALIGN(rect.height, 2); 268 269 /* Datasheet requirement: see register description */ 270 rect.width = ALIGN(rect.width, 2); 271 rect.left = ALIGN(rect.left, 2); 272 273 rect.width = clamp_t(u32, rect.width, MT9M001_MIN_WIDTH, 274 MT9M001_MAX_WIDTH); 275 rect.left = clamp_t(u32, rect.left, MT9M001_COLUMN_SKIP, 276 MT9M001_COLUMN_SKIP + MT9M001_MAX_WIDTH - rect.width); 277 278 rect.height = clamp_t(u32, rect.height, MT9M001_MIN_HEIGHT, 279 MT9M001_MAX_HEIGHT); 280 rect.top = clamp_t(u32, rect.top, MT9M001_ROW_SKIP, 281 MT9M001_ROW_SKIP + MT9M001_MAX_HEIGHT - rect.height); 282 283 mt9m001->total_h = rect.height + mt9m001->y_skip_top + 284 MT9M001_DEFAULT_VBLANK; 285 286 mt9m001->rect = rect; 287 288 return 0; 289} 290 291static int mt9m001_get_selection(struct v4l2_subdev *sd, 292 struct v4l2_subdev_state *sd_state, 293 struct v4l2_subdev_selection *sel) 294{ 295 struct i2c_client *client = v4l2_get_subdevdata(sd); 296 struct mt9m001 *mt9m001 = to_mt9m001(client); 297 298 if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) 299 return -EINVAL; 300 301 switch (sel->target) { 302 case V4L2_SEL_TGT_CROP_BOUNDS: 303 sel->r.left = MT9M001_COLUMN_SKIP; 304 sel->r.top = MT9M001_ROW_SKIP; 305 sel->r.width = MT9M001_MAX_WIDTH; 306 sel->r.height = MT9M001_MAX_HEIGHT; 307 return 0; 308 case V4L2_SEL_TGT_CROP: 309 sel->r = mt9m001->rect; 310 return 0; 311 default: 312 return -EINVAL; 313 } 314} 315 316static int mt9m001_get_fmt(struct v4l2_subdev *sd, 317 struct v4l2_subdev_state *sd_state, 318 struct v4l2_subdev_format *format) 319{ 320 struct i2c_client *client = v4l2_get_subdevdata(sd); 321 struct mt9m001 *mt9m001 = to_mt9m001(client); 322 struct v4l2_mbus_framefmt *mf = &format->format; 323 324 if (format->pad) 325 return -EINVAL; 326 327 if (format->which == V4L2_SUBDEV_FORMAT_TRY) { 328 mf = v4l2_subdev_state_get_format(sd_state, 0); 329 format->format = *mf; 330 return 0; 331 } 332 333 mf->width = mt9m001->rect.width; 334 mf->height = mt9m001->rect.height; 335 mf->code = mt9m001->fmt->code; 336 mf->colorspace = mt9m001->fmt->colorspace; 337 mf->field = V4L2_FIELD_NONE; 338 mf->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; 339 mf->quantization = V4L2_QUANTIZATION_DEFAULT; 340 mf->xfer_func = V4L2_XFER_FUNC_DEFAULT; 341 342 return 0; 343} 344 345static int mt9m001_s_fmt(struct v4l2_subdev *sd, 346 const struct mt9m001_datafmt *fmt, 347 struct v4l2_mbus_framefmt *mf) 348{ 349 struct i2c_client *client = v4l2_get_subdevdata(sd); 350 struct mt9m001 *mt9m001 = to_mt9m001(client); 351 struct v4l2_subdev_selection sel = { 352 .which = V4L2_SUBDEV_FORMAT_ACTIVE, 353 .target = V4L2_SEL_TGT_CROP, 354 .r.left = mt9m001->rect.left, 355 .r.top = mt9m001->rect.top, 356 .r.width = mf->width, 357 .r.height = mf->height, 358 }; 359 int ret; 360 361 /* No support for scaling so far, just crop. TODO: use skipping */ 362 ret = mt9m001_set_selection(sd, NULL, &sel); 363 if (!ret) { 364 mf->width = mt9m001->rect.width; 365 mf->height = mt9m001->rect.height; 366 mt9m001->fmt = fmt; 367 mf->colorspace = fmt->colorspace; 368 } 369 370 return ret; 371} 372 373static int mt9m001_set_fmt(struct v4l2_subdev *sd, 374 struct v4l2_subdev_state *sd_state, 375 struct v4l2_subdev_format *format) 376{ 377 struct v4l2_mbus_framefmt *mf = &format->format; 378 struct i2c_client *client = v4l2_get_subdevdata(sd); 379 struct mt9m001 *mt9m001 = to_mt9m001(client); 380 const struct mt9m001_datafmt *fmt; 381 382 if (format->pad) 383 return -EINVAL; 384 385 v4l_bound_align_image(&mf->width, MT9M001_MIN_WIDTH, 386 MT9M001_MAX_WIDTH, 1, 387 &mf->height, MT9M001_MIN_HEIGHT + mt9m001->y_skip_top, 388 MT9M001_MAX_HEIGHT + mt9m001->y_skip_top, 0, 0); 389 390 if (mt9m001->fmts == mt9m001_colour_fmts) 391 mf->height = ALIGN(mf->height - 1, 2); 392 393 fmt = mt9m001_find_datafmt(mf->code, mt9m001->fmts, 394 mt9m001->num_fmts); 395 if (!fmt) { 396 fmt = mt9m001->fmt; 397 mf->code = fmt->code; 398 } 399 400 mf->colorspace = fmt->colorspace; 401 mf->field = V4L2_FIELD_NONE; 402 mf->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; 403 mf->quantization = V4L2_QUANTIZATION_DEFAULT; 404 mf->xfer_func = V4L2_XFER_FUNC_DEFAULT; 405 406 if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) 407 return mt9m001_s_fmt(sd, fmt, mf); 408 *v4l2_subdev_state_get_format(sd_state, 0) = *mf; 409 return 0; 410} 411 412#ifdef CONFIG_VIDEO_ADV_DEBUG 413static int mt9m001_g_register(struct v4l2_subdev *sd, 414 struct v4l2_dbg_register *reg) 415{ 416 struct i2c_client *client = v4l2_get_subdevdata(sd); 417 418 if (reg->reg > 0xff) 419 return -EINVAL; 420 421 reg->size = 2; 422 reg->val = reg_read(client, reg->reg); 423 424 if (reg->val > 0xffff) 425 return -EIO; 426 427 return 0; 428} 429 430static int mt9m001_s_register(struct v4l2_subdev *sd, 431 const struct v4l2_dbg_register *reg) 432{ 433 struct i2c_client *client = v4l2_get_subdevdata(sd); 434 435 if (reg->reg > 0xff) 436 return -EINVAL; 437 438 if (reg_write(client, reg->reg, reg->val) < 0) 439 return -EIO; 440 441 return 0; 442} 443#endif 444 445static int mt9m001_power_on(struct device *dev) 446{ 447 struct i2c_client *client = to_i2c_client(dev); 448 struct mt9m001 *mt9m001 = to_mt9m001(client); 449 int ret; 450 451 ret = clk_prepare_enable(mt9m001->clk); 452 if (ret) 453 return ret; 454 455 if (mt9m001->standby_gpio) { 456 gpiod_set_value_cansleep(mt9m001->standby_gpio, 0); 457 usleep_range(1000, 2000); 458 } 459 460 if (mt9m001->reset_gpio) { 461 gpiod_set_value_cansleep(mt9m001->reset_gpio, 1); 462 usleep_range(1000, 2000); 463 gpiod_set_value_cansleep(mt9m001->reset_gpio, 0); 464 usleep_range(1000, 2000); 465 } 466 467 return 0; 468} 469 470static int mt9m001_power_off(struct device *dev) 471{ 472 struct i2c_client *client = to_i2c_client(dev); 473 struct mt9m001 *mt9m001 = to_mt9m001(client); 474 475 gpiod_set_value_cansleep(mt9m001->standby_gpio, 1); 476 clk_disable_unprepare(mt9m001->clk); 477 478 return 0; 479} 480 481static int mt9m001_g_volatile_ctrl(struct v4l2_ctrl *ctrl) 482{ 483 struct mt9m001 *mt9m001 = container_of(ctrl->handler, 484 struct mt9m001, hdl); 485 s32 min, max; 486 487 switch (ctrl->id) { 488 case V4L2_CID_EXPOSURE_AUTO: 489 min = mt9m001->exposure->minimum; 490 max = mt9m001->exposure->maximum; 491 mt9m001->exposure->val = 492 (524 + (mt9m001->total_h - 1) * (max - min)) / 1048 + min; 493 break; 494 } 495 return 0; 496} 497 498static int mt9m001_s_ctrl(struct v4l2_ctrl *ctrl) 499{ 500 struct mt9m001 *mt9m001 = container_of(ctrl->handler, 501 struct mt9m001, hdl); 502 struct v4l2_subdev *sd = &mt9m001->subdev; 503 struct i2c_client *client = v4l2_get_subdevdata(sd); 504 struct v4l2_ctrl *exp = mt9m001->exposure; 505 int data; 506 int ret; 507 508 if (!pm_runtime_get_if_in_use(&client->dev)) 509 return 0; 510 511 switch (ctrl->id) { 512 case V4L2_CID_VFLIP: 513 if (ctrl->val) 514 ret = reg_set(client, MT9M001_READ_OPTIONS2, 0x8000); 515 else 516 ret = reg_clear(client, MT9M001_READ_OPTIONS2, 0x8000); 517 break; 518 519 case V4L2_CID_GAIN: 520 /* See Datasheet Table 7, Gain settings. */ 521 if (ctrl->val <= ctrl->default_value) { 522 /* Pack it into 0..1 step 0.125, register values 0..8 */ 523 unsigned long range = ctrl->default_value - ctrl->minimum; 524 data = ((ctrl->val - (s32)ctrl->minimum) * 8 + range / 2) / range; 525 526 dev_dbg(&client->dev, "Setting gain %d\n", data); 527 ret = reg_write(client, MT9M001_GLOBAL_GAIN, data); 528 } else { 529 /* Pack it into 1.125..15 variable step, register values 9..67 */ 530 /* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */ 531 unsigned long range = ctrl->maximum - ctrl->default_value - 1; 532 unsigned long gain = ((ctrl->val - (s32)ctrl->default_value - 1) * 533 111 + range / 2) / range + 9; 534 535 if (gain <= 32) 536 data = gain; 537 else if (gain <= 64) 538 data = ((gain - 32) * 16 + 16) / 32 + 80; 539 else 540 data = ((gain - 64) * 7 + 28) / 56 + 96; 541 542 dev_dbg(&client->dev, "Setting gain from %d to %d\n", 543 reg_read(client, MT9M001_GLOBAL_GAIN), data); 544 ret = reg_write(client, MT9M001_GLOBAL_GAIN, data); 545 } 546 break; 547 548 case V4L2_CID_EXPOSURE_AUTO: 549 if (ctrl->val == V4L2_EXPOSURE_MANUAL) { 550 unsigned long range = exp->maximum - exp->minimum; 551 unsigned long shutter = ((exp->val - (s32)exp->minimum) * 1048 + 552 range / 2) / range + 1; 553 554 dev_dbg(&client->dev, 555 "Setting shutter width from %d to %lu\n", 556 reg_read(client, MT9M001_SHUTTER_WIDTH), shutter); 557 ret = reg_write(client, MT9M001_SHUTTER_WIDTH, shutter); 558 } else { 559 mt9m001->total_h = mt9m001->rect.height + 560 mt9m001->y_skip_top + MT9M001_DEFAULT_VBLANK; 561 ret = reg_write(client, MT9M001_SHUTTER_WIDTH, 562 mt9m001->total_h); 563 } 564 break; 565 default: 566 ret = -EINVAL; 567 break; 568 } 569 570 pm_runtime_put(&client->dev); 571 572 return ret; 573} 574 575/* 576 * Interface active, can use i2c. If it fails, it can indeed mean, that 577 * this wasn't our capture interface, so, we wait for the right one 578 */ 579static int mt9m001_video_probe(struct i2c_client *client) 580{ 581 struct mt9m001 *mt9m001 = to_mt9m001(client); 582 s32 data; 583 int ret; 584 585 /* Enable the chip */ 586 data = reg_write(client, MT9M001_CHIP_ENABLE, 1); 587 dev_dbg(&client->dev, "write: %d\n", data); 588 589 /* Read out the chip version register */ 590 data = reg_read(client, MT9M001_CHIP_VERSION); 591 592 /* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */ 593 switch (data) { 594 case 0x8411: 595 case 0x8421: 596 mt9m001->fmts = mt9m001_colour_fmts; 597 mt9m001->num_fmts = ARRAY_SIZE(mt9m001_colour_fmts); 598 break; 599 case 0x8431: 600 mt9m001->fmts = mt9m001_monochrome_fmts; 601 mt9m001->num_fmts = ARRAY_SIZE(mt9m001_monochrome_fmts); 602 break; 603 default: 604 dev_err(&client->dev, 605 "No MT9M001 chip detected, register read %x\n", data); 606 ret = -ENODEV; 607 goto done; 608 } 609 610 mt9m001->fmt = &mt9m001->fmts[0]; 611 612 dev_info(&client->dev, "Detected a MT9M001 chip ID %x (%s)\n", data, 613 data == 0x8431 ? "C12STM" : "C12ST"); 614 615 ret = mt9m001_init(client); 616 if (ret < 0) { 617 dev_err(&client->dev, "Failed to initialise the camera\n"); 618 goto done; 619 } 620 621 /* mt9m001_init() has reset the chip, returning registers to defaults */ 622 ret = v4l2_ctrl_handler_setup(&mt9m001->hdl); 623 624done: 625 return ret; 626} 627 628static int mt9m001_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines) 629{ 630 struct i2c_client *client = v4l2_get_subdevdata(sd); 631 struct mt9m001 *mt9m001 = to_mt9m001(client); 632 633 *lines = mt9m001->y_skip_top; 634 635 return 0; 636} 637 638static const struct v4l2_ctrl_ops mt9m001_ctrl_ops = { 639 .g_volatile_ctrl = mt9m001_g_volatile_ctrl, 640 .s_ctrl = mt9m001_s_ctrl, 641}; 642 643static const struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = { 644 .log_status = v4l2_ctrl_subdev_log_status, 645 .subscribe_event = v4l2_ctrl_subdev_subscribe_event, 646 .unsubscribe_event = v4l2_event_subdev_unsubscribe, 647#ifdef CONFIG_VIDEO_ADV_DEBUG 648 .g_register = mt9m001_g_register, 649 .s_register = mt9m001_s_register, 650#endif 651}; 652 653static int mt9m001_init_state(struct v4l2_subdev *sd, 654 struct v4l2_subdev_state *sd_state) 655{ 656 struct i2c_client *client = v4l2_get_subdevdata(sd); 657 struct mt9m001 *mt9m001 = to_mt9m001(client); 658 struct v4l2_mbus_framefmt *try_fmt = 659 v4l2_subdev_state_get_format(sd_state, 0); 660 661 try_fmt->width = MT9M001_MAX_WIDTH; 662 try_fmt->height = MT9M001_MAX_HEIGHT; 663 try_fmt->code = mt9m001->fmts[0].code; 664 try_fmt->colorspace = mt9m001->fmts[0].colorspace; 665 try_fmt->field = V4L2_FIELD_NONE; 666 try_fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; 667 try_fmt->quantization = V4L2_QUANTIZATION_DEFAULT; 668 try_fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT; 669 670 return 0; 671} 672 673static int mt9m001_enum_mbus_code(struct v4l2_subdev *sd, 674 struct v4l2_subdev_state *sd_state, 675 struct v4l2_subdev_mbus_code_enum *code) 676{ 677 struct i2c_client *client = v4l2_get_subdevdata(sd); 678 struct mt9m001 *mt9m001 = to_mt9m001(client); 679 680 if (code->pad || code->index >= mt9m001->num_fmts) 681 return -EINVAL; 682 683 code->code = mt9m001->fmts[code->index].code; 684 return 0; 685} 686 687static int mt9m001_get_mbus_config(struct v4l2_subdev *sd, 688 unsigned int pad, 689 struct v4l2_mbus_config *cfg) 690{ 691 /* MT9M001 has all capture_format parameters fixed */ 692 cfg->type = V4L2_MBUS_PARALLEL; 693 cfg->bus.parallel.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | 694 V4L2_MBUS_HSYNC_ACTIVE_HIGH | 695 V4L2_MBUS_VSYNC_ACTIVE_HIGH | 696 V4L2_MBUS_DATA_ACTIVE_HIGH | 697 V4L2_MBUS_MASTER; 698 699 return 0; 700} 701 702static const struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = { 703 .s_stream = mt9m001_s_stream, 704}; 705 706static const struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = { 707 .g_skip_top_lines = mt9m001_g_skip_top_lines, 708}; 709 710static const struct v4l2_subdev_pad_ops mt9m001_subdev_pad_ops = { 711 .enum_mbus_code = mt9m001_enum_mbus_code, 712 .get_selection = mt9m001_get_selection, 713 .set_selection = mt9m001_set_selection, 714 .get_fmt = mt9m001_get_fmt, 715 .set_fmt = mt9m001_set_fmt, 716 .get_mbus_config = mt9m001_get_mbus_config, 717}; 718 719static const struct v4l2_subdev_ops mt9m001_subdev_ops = { 720 .core = &mt9m001_subdev_core_ops, 721 .video = &mt9m001_subdev_video_ops, 722 .sensor = &mt9m001_subdev_sensor_ops, 723 .pad = &mt9m001_subdev_pad_ops, 724}; 725 726static const struct v4l2_subdev_internal_ops mt9m001_internal_ops = { 727 .init_state = mt9m001_init_state, 728}; 729 730static int mt9m001_probe(struct i2c_client *client) 731{ 732 struct mt9m001 *mt9m001; 733 struct i2c_adapter *adapter = client->adapter; 734 int ret; 735 736 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { 737 dev_warn(&adapter->dev, 738 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); 739 return -EIO; 740 } 741 742 mt9m001 = devm_kzalloc(&client->dev, sizeof(*mt9m001), GFP_KERNEL); 743 if (!mt9m001) 744 return -ENOMEM; 745 746 mt9m001->clk = devm_clk_get(&client->dev, NULL); 747 if (IS_ERR(mt9m001->clk)) 748 return PTR_ERR(mt9m001->clk); 749 750 mt9m001->standby_gpio = devm_gpiod_get_optional(&client->dev, "standby", 751 GPIOD_OUT_LOW); 752 if (IS_ERR(mt9m001->standby_gpio)) 753 return PTR_ERR(mt9m001->standby_gpio); 754 755 mt9m001->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", 756 GPIOD_OUT_LOW); 757 if (IS_ERR(mt9m001->reset_gpio)) 758 return PTR_ERR(mt9m001->reset_gpio); 759 760 v4l2_i2c_subdev_init(&mt9m001->subdev, client, &mt9m001_subdev_ops); 761 mt9m001->subdev.internal_ops = &mt9m001_internal_ops; 762 mt9m001->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | 763 V4L2_SUBDEV_FL_HAS_EVENTS; 764 v4l2_ctrl_handler_init(&mt9m001->hdl, 4); 765 v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, 766 V4L2_CID_VFLIP, 0, 1, 1, 0); 767 v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, 768 V4L2_CID_GAIN, 0, 127, 1, 64); 769 mt9m001->exposure = v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, 770 V4L2_CID_EXPOSURE, 1, 255, 1, 255); 771 /* 772 * Simulated autoexposure. If enabled, we calculate shutter width 773 * ourselves in the driver based on vertical blanking and frame width 774 */ 775 mt9m001->autoexposure = v4l2_ctrl_new_std_menu(&mt9m001->hdl, 776 &mt9m001_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0, 777 V4L2_EXPOSURE_AUTO); 778 mt9m001->subdev.ctrl_handler = &mt9m001->hdl; 779 if (mt9m001->hdl.error) 780 return mt9m001->hdl.error; 781 782 v4l2_ctrl_auto_cluster(2, &mt9m001->autoexposure, 783 V4L2_EXPOSURE_MANUAL, true); 784 785 mutex_init(&mt9m001->mutex); 786 mt9m001->hdl.lock = &mt9m001->mutex; 787 788 /* Second stage probe - when a capture adapter is there */ 789 mt9m001->y_skip_top = 0; 790 mt9m001->rect.left = MT9M001_COLUMN_SKIP; 791 mt9m001->rect.top = MT9M001_ROW_SKIP; 792 mt9m001->rect.width = MT9M001_MAX_WIDTH; 793 mt9m001->rect.height = MT9M001_MAX_HEIGHT; 794 795 ret = mt9m001_power_on(&client->dev); 796 if (ret) 797 goto error_hdl_free; 798 799 pm_runtime_set_active(&client->dev); 800 pm_runtime_enable(&client->dev); 801 802 ret = mt9m001_video_probe(client); 803 if (ret) 804 goto error_power_off; 805 806 mt9m001->pad.flags = MEDIA_PAD_FL_SOURCE; 807 mt9m001->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR; 808 ret = media_entity_pads_init(&mt9m001->subdev.entity, 1, &mt9m001->pad); 809 if (ret) 810 goto error_power_off; 811 812 ret = v4l2_async_register_subdev(&mt9m001->subdev); 813 if (ret) 814 goto error_entity_cleanup; 815 816 pm_runtime_idle(&client->dev); 817 818 return 0; 819 820error_entity_cleanup: 821 media_entity_cleanup(&mt9m001->subdev.entity); 822error_power_off: 823 pm_runtime_disable(&client->dev); 824 pm_runtime_set_suspended(&client->dev); 825 mt9m001_power_off(&client->dev); 826 827error_hdl_free: 828 v4l2_ctrl_handler_free(&mt9m001->hdl); 829 mutex_destroy(&mt9m001->mutex); 830 831 return ret; 832} 833 834static void mt9m001_remove(struct i2c_client *client) 835{ 836 struct mt9m001 *mt9m001 = to_mt9m001(client); 837 838 /* 839 * As it increments RPM usage_count even on errors, we don't need to 840 * check the returned code here. 841 */ 842 pm_runtime_get_sync(&client->dev); 843 844 v4l2_async_unregister_subdev(&mt9m001->subdev); 845 media_entity_cleanup(&mt9m001->subdev.entity); 846 847 pm_runtime_disable(&client->dev); 848 pm_runtime_set_suspended(&client->dev); 849 pm_runtime_put_noidle(&client->dev); 850 mt9m001_power_off(&client->dev); 851 852 v4l2_ctrl_handler_free(&mt9m001->hdl); 853 mutex_destroy(&mt9m001->mutex); 854} 855 856static const struct i2c_device_id mt9m001_id[] = { 857 { "mt9m001", 0 }, 858 { } 859}; 860MODULE_DEVICE_TABLE(i2c, mt9m001_id); 861 862static const struct dev_pm_ops mt9m001_pm_ops = { 863 SET_RUNTIME_PM_OPS(mt9m001_power_off, mt9m001_power_on, NULL) 864}; 865 866static const struct of_device_id mt9m001_of_match[] = { 867 { .compatible = "onnn,mt9m001", }, 868 { /* sentinel */ }, 869}; 870MODULE_DEVICE_TABLE(of, mt9m001_of_match); 871 872static struct i2c_driver mt9m001_i2c_driver = { 873 .driver = { 874 .name = "mt9m001", 875 .pm = &mt9m001_pm_ops, 876 .of_match_table = mt9m001_of_match, 877 }, 878 .probe = mt9m001_probe, 879 .remove = mt9m001_remove, 880 .id_table = mt9m001_id, 881}; 882 883module_i2c_driver(mt9m001_i2c_driver); 884 885MODULE_DESCRIPTION("Micron MT9M001 Camera driver"); 886MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>"); 887MODULE_LICENSE("GPL v2"); 888