1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Sony imx412 Camera Sensor Driver 4 * 5 * Copyright (C) 2021 Intel Corporation 6 */ 7#include <asm/unaligned.h> 8 9#include <linux/clk.h> 10#include <linux/delay.h> 11#include <linux/i2c.h> 12#include <linux/module.h> 13#include <linux/pm_runtime.h> 14#include <linux/regulator/consumer.h> 15 16#include <media/v4l2-ctrls.h> 17#include <media/v4l2-fwnode.h> 18#include <media/v4l2-subdev.h> 19 20/* Streaming Mode */ 21#define IMX412_REG_MODE_SELECT 0x0100 22#define IMX412_MODE_STANDBY 0x00 23#define IMX412_MODE_STREAMING 0x01 24 25/* Lines per frame */ 26#define IMX412_REG_LPFR 0x0340 27 28/* Chip ID */ 29#define IMX412_REG_ID 0x0016 30#define IMX412_ID 0x577 31 32/* Exposure control */ 33#define IMX412_REG_EXPOSURE_CIT 0x0202 34#define IMX412_EXPOSURE_MIN 8 35#define IMX412_EXPOSURE_OFFSET 22 36#define IMX412_EXPOSURE_STEP 1 37#define IMX412_EXPOSURE_DEFAULT 0x0648 38 39/* Analog gain control */ 40#define IMX412_REG_AGAIN 0x0204 41#define IMX412_AGAIN_MIN 0 42#define IMX412_AGAIN_MAX 978 43#define IMX412_AGAIN_STEP 1 44#define IMX412_AGAIN_DEFAULT 0 45 46/* Group hold register */ 47#define IMX412_REG_HOLD 0x0104 48 49/* Input clock rate */ 50#define IMX412_INCLK_RATE 24000000 51 52/* CSI2 HW configuration */ 53#define IMX412_LINK_FREQ 600000000 54#define IMX412_NUM_DATA_LANES 4 55 56#define IMX412_REG_MIN 0x00 57#define IMX412_REG_MAX 0xffff 58 59/** 60 * struct imx412_reg - imx412 sensor register 61 * @address: Register address 62 * @val: Register value 63 */ 64struct imx412_reg { 65 u16 address; 66 u8 val; 67}; 68 69/** 70 * struct imx412_reg_list - imx412 sensor register list 71 * @num_of_regs: Number of registers in the list 72 * @regs: Pointer to register list 73 */ 74struct imx412_reg_list { 75 u32 num_of_regs; 76 const struct imx412_reg *regs; 77}; 78 79/** 80 * struct imx412_mode - imx412 sensor mode structure 81 * @width: Frame width 82 * @height: Frame height 83 * @code: Format code 84 * @hblank: Horizontal blanking in lines 85 * @vblank: Vertical blanking in lines 86 * @vblank_min: Minimum vertical blanking in lines 87 * @vblank_max: Maximum vertical blanking in lines 88 * @pclk: Sensor pixel clock 89 * @link_freq_idx: Link frequency index 90 * @reg_list: Register list for sensor mode 91 */ 92struct imx412_mode { 93 u32 width; 94 u32 height; 95 u32 code; 96 u32 hblank; 97 u32 vblank; 98 u32 vblank_min; 99 u32 vblank_max; 100 u64 pclk; 101 u32 link_freq_idx; 102 struct imx412_reg_list reg_list; 103}; 104 105static const char * const imx412_supply_names[] = { 106 "dovdd", /* Digital I/O power */ 107 "avdd", /* Analog power */ 108 "dvdd", /* Digital core power */ 109}; 110 111/** 112 * struct imx412 - imx412 sensor device structure 113 * @dev: Pointer to generic device 114 * @client: Pointer to i2c client 115 * @sd: V4L2 sub-device 116 * @pad: Media pad. Only one pad supported 117 * @reset_gpio: Sensor reset gpio 118 * @inclk: Sensor input clock 119 * @supplies: Regulator supplies 120 * @ctrl_handler: V4L2 control handler 121 * @link_freq_ctrl: Pointer to link frequency control 122 * @pclk_ctrl: Pointer to pixel clock control 123 * @hblank_ctrl: Pointer to horizontal blanking control 124 * @vblank_ctrl: Pointer to vertical blanking control 125 * @exp_ctrl: Pointer to exposure control 126 * @again_ctrl: Pointer to analog gain control 127 * @vblank: Vertical blanking in lines 128 * @cur_mode: Pointer to current selected sensor mode 129 * @mutex: Mutex for serializing sensor controls 130 */ 131struct imx412 { 132 struct device *dev; 133 struct i2c_client *client; 134 struct v4l2_subdev sd; 135 struct media_pad pad; 136 struct gpio_desc *reset_gpio; 137 struct clk *inclk; 138 struct regulator_bulk_data supplies[ARRAY_SIZE(imx412_supply_names)]; 139 struct v4l2_ctrl_handler ctrl_handler; 140 struct v4l2_ctrl *link_freq_ctrl; 141 struct v4l2_ctrl *pclk_ctrl; 142 struct v4l2_ctrl *hblank_ctrl; 143 struct v4l2_ctrl *vblank_ctrl; 144 struct { 145 struct v4l2_ctrl *exp_ctrl; 146 struct v4l2_ctrl *again_ctrl; 147 }; 148 u32 vblank; 149 const struct imx412_mode *cur_mode; 150 struct mutex mutex; 151}; 152 153static const s64 link_freq[] = { 154 IMX412_LINK_FREQ, 155}; 156 157/* Sensor mode registers */ 158static const struct imx412_reg mode_4056x3040_regs[] = { 159 {0x0136, 0x18}, 160 {0x0137, 0x00}, 161 {0x3c7e, 0x08}, 162 {0x3c7f, 0x02}, 163 {0x38a8, 0x1f}, 164 {0x38a9, 0xff}, 165 {0x38aa, 0x1f}, 166 {0x38ab, 0xff}, 167 {0x55d4, 0x00}, 168 {0x55d5, 0x00}, 169 {0x55d6, 0x07}, 170 {0x55d7, 0xff}, 171 {0x55e8, 0x07}, 172 {0x55e9, 0xff}, 173 {0x55ea, 0x00}, 174 {0x55eb, 0x00}, 175 {0x575c, 0x07}, 176 {0x575d, 0xff}, 177 {0x575e, 0x00}, 178 {0x575f, 0x00}, 179 {0x5764, 0x00}, 180 {0x5765, 0x00}, 181 {0x5766, 0x07}, 182 {0x5767, 0xff}, 183 {0x5974, 0x04}, 184 {0x5975, 0x01}, 185 {0x5f10, 0x09}, 186 {0x5f11, 0x92}, 187 {0x5f12, 0x32}, 188 {0x5f13, 0x72}, 189 {0x5f14, 0x16}, 190 {0x5f15, 0xba}, 191 {0x5f17, 0x13}, 192 {0x5f18, 0x24}, 193 {0x5f19, 0x60}, 194 {0x5f1a, 0xe3}, 195 {0x5f1b, 0xad}, 196 {0x5f1c, 0x74}, 197 {0x5f2d, 0x25}, 198 {0x5f5c, 0xd0}, 199 {0x6a22, 0x00}, 200 {0x6a23, 0x1d}, 201 {0x7ba8, 0x00}, 202 {0x7ba9, 0x00}, 203 {0x886b, 0x00}, 204 {0x9002, 0x0a}, 205 {0x9004, 0x1a}, 206 {0x9214, 0x93}, 207 {0x9215, 0x69}, 208 {0x9216, 0x93}, 209 {0x9217, 0x6b}, 210 {0x9218, 0x93}, 211 {0x9219, 0x6d}, 212 {0x921a, 0x57}, 213 {0x921b, 0x58}, 214 {0x921c, 0x57}, 215 {0x921d, 0x59}, 216 {0x921e, 0x57}, 217 {0x921f, 0x5a}, 218 {0x9220, 0x57}, 219 {0x9221, 0x5b}, 220 {0x9222, 0x93}, 221 {0x9223, 0x02}, 222 {0x9224, 0x93}, 223 {0x9225, 0x03}, 224 {0x9226, 0x93}, 225 {0x9227, 0x04}, 226 {0x9228, 0x93}, 227 {0x9229, 0x05}, 228 {0x922a, 0x98}, 229 {0x922b, 0x21}, 230 {0x922c, 0xb2}, 231 {0x922d, 0xdb}, 232 {0x922e, 0xb2}, 233 {0x922f, 0xdc}, 234 {0x9230, 0xb2}, 235 {0x9231, 0xdd}, 236 {0x9232, 0xe2}, 237 {0x9233, 0xe1}, 238 {0x9234, 0xb2}, 239 {0x9235, 0xe2}, 240 {0x9236, 0xb2}, 241 {0x9237, 0xe3}, 242 {0x9238, 0xb7}, 243 {0x9239, 0xb9}, 244 {0x923a, 0xb7}, 245 {0x923b, 0xbb}, 246 {0x923c, 0xb7}, 247 {0x923d, 0xbc}, 248 {0x923e, 0xb7}, 249 {0x923f, 0xc5}, 250 {0x9240, 0xb7}, 251 {0x9241, 0xc7}, 252 {0x9242, 0xb7}, 253 {0x9243, 0xc9}, 254 {0x9244, 0x98}, 255 {0x9245, 0x56}, 256 {0x9246, 0x98}, 257 {0x9247, 0x55}, 258 {0x9380, 0x00}, 259 {0x9381, 0x62}, 260 {0x9382, 0x00}, 261 {0x9383, 0x56}, 262 {0x9384, 0x00}, 263 {0x9385, 0x52}, 264 {0x9388, 0x00}, 265 {0x9389, 0x55}, 266 {0x938a, 0x00}, 267 {0x938b, 0x55}, 268 {0x938c, 0x00}, 269 {0x938d, 0x41}, 270 {0x5078, 0x01}, 271 {0x0112, 0x0a}, 272 {0x0113, 0x0a}, 273 {0x0114, 0x03}, 274 {0x0342, 0x11}, 275 {0x0343, 0xa0}, 276 {0x0340, 0x0d}, 277 {0x0341, 0xda}, 278 {0x3210, 0x00}, 279 {0x0344, 0x00}, 280 {0x0345, 0x00}, 281 {0x0346, 0x00}, 282 {0x0347, 0x00}, 283 {0x0348, 0x0f}, 284 {0x0349, 0xd7}, 285 {0x034a, 0x0b}, 286 {0x034b, 0xdf}, 287 {0x00e3, 0x00}, 288 {0x00e4, 0x00}, 289 {0x00e5, 0x01}, 290 {0x00fc, 0x0a}, 291 {0x00fd, 0x0a}, 292 {0x00fe, 0x0a}, 293 {0x00ff, 0x0a}, 294 {0xe013, 0x00}, 295 {0x0220, 0x00}, 296 {0x0221, 0x11}, 297 {0x0381, 0x01}, 298 {0x0383, 0x01}, 299 {0x0385, 0x01}, 300 {0x0387, 0x01}, 301 {0x0900, 0x00}, 302 {0x0901, 0x11}, 303 {0x0902, 0x00}, 304 {0x3140, 0x02}, 305 {0x3241, 0x11}, 306 {0x3250, 0x03}, 307 {0x3e10, 0x00}, 308 {0x3e11, 0x00}, 309 {0x3f0d, 0x00}, 310 {0x3f42, 0x00}, 311 {0x3f43, 0x00}, 312 {0x0401, 0x00}, 313 {0x0404, 0x00}, 314 {0x0405, 0x10}, 315 {0x0408, 0x00}, 316 {0x0409, 0x00}, 317 {0x040a, 0x00}, 318 {0x040b, 0x00}, 319 {0x040c, 0x0f}, 320 {0x040d, 0xd8}, 321 {0x040e, 0x0b}, 322 {0x040f, 0xe0}, 323 {0x034c, 0x0f}, 324 {0x034d, 0xd8}, 325 {0x034e, 0x0b}, 326 {0x034f, 0xe0}, 327 {0x0301, 0x05}, 328 {0x0303, 0x02}, 329 {0x0305, 0x04}, 330 {0x0306, 0x00}, 331 {0x0307, 0xc8}, 332 {0x0309, 0x0a}, 333 {0x030b, 0x01}, 334 {0x030d, 0x02}, 335 {0x030e, 0x01}, 336 {0x030f, 0x5e}, 337 {0x0310, 0x00}, 338 {0x0820, 0x12}, 339 {0x0821, 0xc0}, 340 {0x0822, 0x00}, 341 {0x0823, 0x00}, 342 {0x3e20, 0x01}, 343 {0x3e37, 0x00}, 344 {0x3f50, 0x00}, 345 {0x3f56, 0x00}, 346 {0x3f57, 0xe2}, 347 {0x3c0a, 0x5a}, 348 {0x3c0b, 0x55}, 349 {0x3c0c, 0x28}, 350 {0x3c0d, 0x07}, 351 {0x3c0e, 0xff}, 352 {0x3c0f, 0x00}, 353 {0x3c10, 0x00}, 354 {0x3c11, 0x02}, 355 {0x3c12, 0x00}, 356 {0x3c13, 0x03}, 357 {0x3c14, 0x00}, 358 {0x3c15, 0x00}, 359 {0x3c16, 0x0c}, 360 {0x3c17, 0x0c}, 361 {0x3c18, 0x0c}, 362 {0x3c19, 0x0a}, 363 {0x3c1a, 0x0a}, 364 {0x3c1b, 0x0a}, 365 {0x3c1c, 0x00}, 366 {0x3c1d, 0x00}, 367 {0x3c1e, 0x00}, 368 {0x3c1f, 0x00}, 369 {0x3c20, 0x00}, 370 {0x3c21, 0x00}, 371 {0x3c22, 0x3f}, 372 {0x3c23, 0x0a}, 373 {0x3e35, 0x01}, 374 {0x3f4a, 0x03}, 375 {0x3f4b, 0xbf}, 376 {0x3f26, 0x00}, 377 {0x0202, 0x0d}, 378 {0x0203, 0xc4}, 379 {0x0204, 0x00}, 380 {0x0205, 0x00}, 381 {0x020e, 0x01}, 382 {0x020f, 0x00}, 383 {0x0210, 0x01}, 384 {0x0211, 0x00}, 385 {0x0212, 0x01}, 386 {0x0213, 0x00}, 387 {0x0214, 0x01}, 388 {0x0215, 0x00}, 389 {0xbcf1, 0x00}, 390}; 391 392/* Supported sensor mode configurations */ 393static const struct imx412_mode supported_mode = { 394 .width = 4056, 395 .height = 3040, 396 .hblank = 456, 397 .vblank = 506, 398 .vblank_min = 506, 399 .vblank_max = 32420, 400 .pclk = 480000000, 401 .link_freq_idx = 0, 402 .code = MEDIA_BUS_FMT_SRGGB10_1X10, 403 .reg_list = { 404 .num_of_regs = ARRAY_SIZE(mode_4056x3040_regs), 405 .regs = mode_4056x3040_regs, 406 }, 407}; 408 409/** 410 * to_imx412() - imx412 V4L2 sub-device to imx412 device. 411 * @subdev: pointer to imx412 V4L2 sub-device 412 * 413 * Return: pointer to imx412 device 414 */ 415static inline struct imx412 *to_imx412(struct v4l2_subdev *subdev) 416{ 417 return container_of(subdev, struct imx412, sd); 418} 419 420/** 421 * imx412_read_reg() - Read registers. 422 * @imx412: pointer to imx412 device 423 * @reg: register address 424 * @len: length of bytes to read. Max supported bytes is 4 425 * @val: pointer to register value to be filled. 426 * 427 * Return: 0 if successful, error code otherwise. 428 */ 429static int imx412_read_reg(struct imx412 *imx412, u16 reg, u32 len, u32 *val) 430{ 431 struct i2c_client *client = v4l2_get_subdevdata(&imx412->sd); 432 struct i2c_msg msgs[2] = {0}; 433 u8 addr_buf[2] = {0}; 434 u8 data_buf[4] = {0}; 435 int ret; 436 437 if (WARN_ON(len > 4)) 438 return -EINVAL; 439 440 put_unaligned_be16(reg, addr_buf); 441 442 /* Write register address */ 443 msgs[0].addr = client->addr; 444 msgs[0].flags = 0; 445 msgs[0].len = ARRAY_SIZE(addr_buf); 446 msgs[0].buf = addr_buf; 447 448 /* Read data from register */ 449 msgs[1].addr = client->addr; 450 msgs[1].flags = I2C_M_RD; 451 msgs[1].len = len; 452 msgs[1].buf = &data_buf[4 - len]; 453 454 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); 455 if (ret != ARRAY_SIZE(msgs)) 456 return -EIO; 457 458 *val = get_unaligned_be32(data_buf); 459 460 return 0; 461} 462 463/** 464 * imx412_write_reg() - Write register 465 * @imx412: pointer to imx412 device 466 * @reg: register address 467 * @len: length of bytes. Max supported bytes is 4 468 * @val: register value 469 * 470 * Return: 0 if successful, error code otherwise. 471 */ 472static int imx412_write_reg(struct imx412 *imx412, u16 reg, u32 len, u32 val) 473{ 474 struct i2c_client *client = v4l2_get_subdevdata(&imx412->sd); 475 u8 buf[6] = {0}; 476 477 if (WARN_ON(len > 4)) 478 return -EINVAL; 479 480 put_unaligned_be16(reg, buf); 481 put_unaligned_be32(val << (8 * (4 - len)), buf + 2); 482 if (i2c_master_send(client, buf, len + 2) != len + 2) 483 return -EIO; 484 485 return 0; 486} 487 488/** 489 * imx412_write_regs() - Write a list of registers 490 * @imx412: pointer to imx412 device 491 * @regs: list of registers to be written 492 * @len: length of registers array 493 * 494 * Return: 0 if successful, error code otherwise. 495 */ 496static int imx412_write_regs(struct imx412 *imx412, 497 const struct imx412_reg *regs, u32 len) 498{ 499 unsigned int i; 500 int ret; 501 502 for (i = 0; i < len; i++) { 503 ret = imx412_write_reg(imx412, regs[i].address, 1, regs[i].val); 504 if (ret) 505 return ret; 506 } 507 508 return 0; 509} 510 511/** 512 * imx412_update_controls() - Update control ranges based on streaming mode 513 * @imx412: pointer to imx412 device 514 * @mode: pointer to imx412_mode sensor mode 515 * 516 * Return: 0 if successful, error code otherwise. 517 */ 518static int imx412_update_controls(struct imx412 *imx412, 519 const struct imx412_mode *mode) 520{ 521 int ret; 522 523 ret = __v4l2_ctrl_s_ctrl(imx412->link_freq_ctrl, mode->link_freq_idx); 524 if (ret) 525 return ret; 526 527 ret = __v4l2_ctrl_s_ctrl(imx412->hblank_ctrl, mode->hblank); 528 if (ret) 529 return ret; 530 531 return __v4l2_ctrl_modify_range(imx412->vblank_ctrl, mode->vblank_min, 532 mode->vblank_max, 1, mode->vblank); 533} 534 535/** 536 * imx412_update_exp_gain() - Set updated exposure and gain 537 * @imx412: pointer to imx412 device 538 * @exposure: updated exposure value 539 * @gain: updated analog gain value 540 * 541 * Return: 0 if successful, error code otherwise. 542 */ 543static int imx412_update_exp_gain(struct imx412 *imx412, u32 exposure, u32 gain) 544{ 545 u32 lpfr, shutter; 546 int ret; 547 548 lpfr = imx412->vblank + imx412->cur_mode->height; 549 shutter = lpfr - exposure; 550 551 dev_dbg(imx412->dev, "Set exp %u, analog gain %u, shutter %u, lpfr %u", 552 exposure, gain, shutter, lpfr); 553 554 ret = imx412_write_reg(imx412, IMX412_REG_HOLD, 1, 1); 555 if (ret) 556 return ret; 557 558 ret = imx412_write_reg(imx412, IMX412_REG_LPFR, 2, lpfr); 559 if (ret) 560 goto error_release_group_hold; 561 562 ret = imx412_write_reg(imx412, IMX412_REG_EXPOSURE_CIT, 2, shutter); 563 if (ret) 564 goto error_release_group_hold; 565 566 ret = imx412_write_reg(imx412, IMX412_REG_AGAIN, 2, gain); 567 568error_release_group_hold: 569 imx412_write_reg(imx412, IMX412_REG_HOLD, 1, 0); 570 571 return ret; 572} 573 574/** 575 * imx412_set_ctrl() - Set subdevice control 576 * @ctrl: pointer to v4l2_ctrl structure 577 * 578 * Supported controls: 579 * - V4L2_CID_VBLANK 580 * - cluster controls: 581 * - V4L2_CID_ANALOGUE_GAIN 582 * - V4L2_CID_EXPOSURE 583 * 584 * Return: 0 if successful, error code otherwise. 585 */ 586static int imx412_set_ctrl(struct v4l2_ctrl *ctrl) 587{ 588 struct imx412 *imx412 = 589 container_of(ctrl->handler, struct imx412, ctrl_handler); 590 u32 analog_gain; 591 u32 exposure; 592 int ret; 593 594 switch (ctrl->id) { 595 case V4L2_CID_VBLANK: 596 imx412->vblank = imx412->vblank_ctrl->val; 597 598 dev_dbg(imx412->dev, "Received vblank %u, new lpfr %u", 599 imx412->vblank, 600 imx412->vblank + imx412->cur_mode->height); 601 602 ret = __v4l2_ctrl_modify_range(imx412->exp_ctrl, 603 IMX412_EXPOSURE_MIN, 604 imx412->vblank + 605 imx412->cur_mode->height - 606 IMX412_EXPOSURE_OFFSET, 607 1, IMX412_EXPOSURE_DEFAULT); 608 break; 609 case V4L2_CID_EXPOSURE: 610 /* Set controls only if sensor is in power on state */ 611 if (!pm_runtime_get_if_in_use(imx412->dev)) 612 return 0; 613 614 exposure = ctrl->val; 615 analog_gain = imx412->again_ctrl->val; 616 617 dev_dbg(imx412->dev, "Received exp %u, analog gain %u", 618 exposure, analog_gain); 619 620 ret = imx412_update_exp_gain(imx412, exposure, analog_gain); 621 622 pm_runtime_put(imx412->dev); 623 624 break; 625 default: 626 dev_err(imx412->dev, "Invalid control %d", ctrl->id); 627 ret = -EINVAL; 628 } 629 630 return ret; 631} 632 633/* V4l2 subdevice control ops*/ 634static const struct v4l2_ctrl_ops imx412_ctrl_ops = { 635 .s_ctrl = imx412_set_ctrl, 636}; 637 638/** 639 * imx412_enum_mbus_code() - Enumerate V4L2 sub-device mbus codes 640 * @sd: pointer to imx412 V4L2 sub-device structure 641 * @sd_state: V4L2 sub-device configuration 642 * @code: V4L2 sub-device code enumeration need to be filled 643 * 644 * Return: 0 if successful, error code otherwise. 645 */ 646static int imx412_enum_mbus_code(struct v4l2_subdev *sd, 647 struct v4l2_subdev_state *sd_state, 648 struct v4l2_subdev_mbus_code_enum *code) 649{ 650 if (code->index > 0) 651 return -EINVAL; 652 653 code->code = supported_mode.code; 654 655 return 0; 656} 657 658/** 659 * imx412_enum_frame_size() - Enumerate V4L2 sub-device frame sizes 660 * @sd: pointer to imx412 V4L2 sub-device structure 661 * @sd_state: V4L2 sub-device configuration 662 * @fsize: V4L2 sub-device size enumeration need to be filled 663 * 664 * Return: 0 if successful, error code otherwise. 665 */ 666static int imx412_enum_frame_size(struct v4l2_subdev *sd, 667 struct v4l2_subdev_state *sd_state, 668 struct v4l2_subdev_frame_size_enum *fsize) 669{ 670 if (fsize->index > 0) 671 return -EINVAL; 672 673 if (fsize->code != supported_mode.code) 674 return -EINVAL; 675 676 fsize->min_width = supported_mode.width; 677 fsize->max_width = fsize->min_width; 678 fsize->min_height = supported_mode.height; 679 fsize->max_height = fsize->min_height; 680 681 return 0; 682} 683 684/** 685 * imx412_fill_pad_format() - Fill subdevice pad format 686 * from selected sensor mode 687 * @imx412: pointer to imx412 device 688 * @mode: pointer to imx412_mode sensor mode 689 * @fmt: V4L2 sub-device format need to be filled 690 */ 691static void imx412_fill_pad_format(struct imx412 *imx412, 692 const struct imx412_mode *mode, 693 struct v4l2_subdev_format *fmt) 694{ 695 fmt->format.width = mode->width; 696 fmt->format.height = mode->height; 697 fmt->format.code = mode->code; 698 fmt->format.field = V4L2_FIELD_NONE; 699 fmt->format.colorspace = V4L2_COLORSPACE_RAW; 700 fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; 701 fmt->format.quantization = V4L2_QUANTIZATION_DEFAULT; 702 fmt->format.xfer_func = V4L2_XFER_FUNC_NONE; 703} 704 705/** 706 * imx412_get_pad_format() - Get subdevice pad format 707 * @sd: pointer to imx412 V4L2 sub-device structure 708 * @sd_state: V4L2 sub-device configuration 709 * @fmt: V4L2 sub-device format need to be set 710 * 711 * Return: 0 if successful, error code otherwise. 712 */ 713static int imx412_get_pad_format(struct v4l2_subdev *sd, 714 struct v4l2_subdev_state *sd_state, 715 struct v4l2_subdev_format *fmt) 716{ 717 struct imx412 *imx412 = to_imx412(sd); 718 719 mutex_lock(&imx412->mutex); 720 721 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { 722 struct v4l2_mbus_framefmt *framefmt; 723 724 framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); 725 fmt->format = *framefmt; 726 } else { 727 imx412_fill_pad_format(imx412, imx412->cur_mode, fmt); 728 } 729 730 mutex_unlock(&imx412->mutex); 731 732 return 0; 733} 734 735/** 736 * imx412_set_pad_format() - Set subdevice pad format 737 * @sd: pointer to imx412 V4L2 sub-device structure 738 * @sd_state: V4L2 sub-device configuration 739 * @fmt: V4L2 sub-device format need to be set 740 * 741 * Return: 0 if successful, error code otherwise. 742 */ 743static int imx412_set_pad_format(struct v4l2_subdev *sd, 744 struct v4l2_subdev_state *sd_state, 745 struct v4l2_subdev_format *fmt) 746{ 747 struct imx412 *imx412 = to_imx412(sd); 748 const struct imx412_mode *mode; 749 int ret = 0; 750 751 mutex_lock(&imx412->mutex); 752 753 mode = &supported_mode; 754 imx412_fill_pad_format(imx412, mode, fmt); 755 756 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { 757 struct v4l2_mbus_framefmt *framefmt; 758 759 framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); 760 *framefmt = fmt->format; 761 } else { 762 ret = imx412_update_controls(imx412, mode); 763 if (!ret) 764 imx412->cur_mode = mode; 765 } 766 767 mutex_unlock(&imx412->mutex); 768 769 return ret; 770} 771 772/** 773 * imx412_init_state() - Initialize sub-device state 774 * @sd: pointer to imx412 V4L2 sub-device structure 775 * @sd_state: V4L2 sub-device configuration 776 * 777 * Return: 0 if successful, error code otherwise. 778 */ 779static int imx412_init_state(struct v4l2_subdev *sd, 780 struct v4l2_subdev_state *sd_state) 781{ 782 struct imx412 *imx412 = to_imx412(sd); 783 struct v4l2_subdev_format fmt = { 0 }; 784 785 fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; 786 imx412_fill_pad_format(imx412, &supported_mode, &fmt); 787 788 return imx412_set_pad_format(sd, sd_state, &fmt); 789} 790 791/** 792 * imx412_start_streaming() - Start sensor stream 793 * @imx412: pointer to imx412 device 794 * 795 * Return: 0 if successful, error code otherwise. 796 */ 797static int imx412_start_streaming(struct imx412 *imx412) 798{ 799 const struct imx412_reg_list *reg_list; 800 int ret; 801 802 /* Write sensor mode registers */ 803 reg_list = &imx412->cur_mode->reg_list; 804 ret = imx412_write_regs(imx412, reg_list->regs, 805 reg_list->num_of_regs); 806 if (ret) { 807 dev_err(imx412->dev, "fail to write initial registers"); 808 return ret; 809 } 810 811 /* Setup handler will write actual exposure and gain */ 812 ret = __v4l2_ctrl_handler_setup(imx412->sd.ctrl_handler); 813 if (ret) { 814 dev_err(imx412->dev, "fail to setup handler"); 815 return ret; 816 } 817 818 /* Delay is required before streaming*/ 819 usleep_range(7400, 8000); 820 821 /* Start streaming */ 822 ret = imx412_write_reg(imx412, IMX412_REG_MODE_SELECT, 823 1, IMX412_MODE_STREAMING); 824 if (ret) { 825 dev_err(imx412->dev, "fail to start streaming"); 826 return ret; 827 } 828 829 return 0; 830} 831 832/** 833 * imx412_stop_streaming() - Stop sensor stream 834 * @imx412: pointer to imx412 device 835 * 836 * Return: 0 if successful, error code otherwise. 837 */ 838static int imx412_stop_streaming(struct imx412 *imx412) 839{ 840 return imx412_write_reg(imx412, IMX412_REG_MODE_SELECT, 841 1, IMX412_MODE_STANDBY); 842} 843 844/** 845 * imx412_set_stream() - Enable sensor streaming 846 * @sd: pointer to imx412 subdevice 847 * @enable: set to enable sensor streaming 848 * 849 * Return: 0 if successful, error code otherwise. 850 */ 851static int imx412_set_stream(struct v4l2_subdev *sd, int enable) 852{ 853 struct imx412 *imx412 = to_imx412(sd); 854 int ret; 855 856 mutex_lock(&imx412->mutex); 857 858 if (enable) { 859 ret = pm_runtime_resume_and_get(imx412->dev); 860 if (ret) 861 goto error_unlock; 862 863 ret = imx412_start_streaming(imx412); 864 if (ret) 865 goto error_power_off; 866 } else { 867 imx412_stop_streaming(imx412); 868 pm_runtime_put(imx412->dev); 869 } 870 871 mutex_unlock(&imx412->mutex); 872 873 return 0; 874 875error_power_off: 876 pm_runtime_put(imx412->dev); 877error_unlock: 878 mutex_unlock(&imx412->mutex); 879 880 return ret; 881} 882 883/** 884 * imx412_detect() - Detect imx412 sensor 885 * @imx412: pointer to imx412 device 886 * 887 * Return: 0 if successful, -EIO if sensor id does not match 888 */ 889static int imx412_detect(struct imx412 *imx412) 890{ 891 int ret; 892 u32 val; 893 894 ret = imx412_read_reg(imx412, IMX412_REG_ID, 2, &val); 895 if (ret) 896 return ret; 897 898 if (val != IMX412_ID) { 899 dev_err(imx412->dev, "chip id mismatch: %x!=%x", 900 IMX412_ID, val); 901 return -ENXIO; 902 } 903 904 return 0; 905} 906 907/** 908 * imx412_parse_hw_config() - Parse HW configuration and check if supported 909 * @imx412: pointer to imx412 device 910 * 911 * Return: 0 if successful, error code otherwise. 912 */ 913static int imx412_parse_hw_config(struct imx412 *imx412) 914{ 915 struct fwnode_handle *fwnode = dev_fwnode(imx412->dev); 916 struct v4l2_fwnode_endpoint bus_cfg = { 917 .bus_type = V4L2_MBUS_CSI2_DPHY 918 }; 919 struct fwnode_handle *ep; 920 unsigned long rate; 921 unsigned int i; 922 int ret; 923 924 if (!fwnode) 925 return -ENXIO; 926 927 /* Request optional reset pin */ 928 imx412->reset_gpio = devm_gpiod_get_optional(imx412->dev, "reset", 929 GPIOD_OUT_LOW); 930 if (IS_ERR(imx412->reset_gpio)) { 931 dev_err(imx412->dev, "failed to get reset gpio %ld", 932 PTR_ERR(imx412->reset_gpio)); 933 return PTR_ERR(imx412->reset_gpio); 934 } 935 936 /* Get sensor input clock */ 937 imx412->inclk = devm_clk_get(imx412->dev, NULL); 938 if (IS_ERR(imx412->inclk)) { 939 dev_err(imx412->dev, "could not get inclk"); 940 return PTR_ERR(imx412->inclk); 941 } 942 943 rate = clk_get_rate(imx412->inclk); 944 if (rate != IMX412_INCLK_RATE) { 945 dev_err(imx412->dev, "inclk frequency mismatch"); 946 return -EINVAL; 947 } 948 949 /* Get optional DT defined regulators */ 950 for (i = 0; i < ARRAY_SIZE(imx412_supply_names); i++) 951 imx412->supplies[i].supply = imx412_supply_names[i]; 952 953 ret = devm_regulator_bulk_get(imx412->dev, 954 ARRAY_SIZE(imx412_supply_names), 955 imx412->supplies); 956 if (ret) 957 return ret; 958 959 ep = fwnode_graph_get_next_endpoint(fwnode, NULL); 960 if (!ep) 961 return -ENXIO; 962 963 ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); 964 fwnode_handle_put(ep); 965 if (ret) 966 return ret; 967 968 if (bus_cfg.bus.mipi_csi2.num_data_lanes != IMX412_NUM_DATA_LANES) { 969 dev_err(imx412->dev, 970 "number of CSI2 data lanes %d is not supported", 971 bus_cfg.bus.mipi_csi2.num_data_lanes); 972 ret = -EINVAL; 973 goto done_endpoint_free; 974 } 975 976 if (!bus_cfg.nr_of_link_frequencies) { 977 dev_err(imx412->dev, "no link frequencies defined"); 978 ret = -EINVAL; 979 goto done_endpoint_free; 980 } 981 982 for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) 983 if (bus_cfg.link_frequencies[i] == IMX412_LINK_FREQ) 984 goto done_endpoint_free; 985 986 ret = -EINVAL; 987 988done_endpoint_free: 989 v4l2_fwnode_endpoint_free(&bus_cfg); 990 991 return ret; 992} 993 994/* V4l2 subdevice ops */ 995static const struct v4l2_subdev_video_ops imx412_video_ops = { 996 .s_stream = imx412_set_stream, 997}; 998 999static const struct v4l2_subdev_pad_ops imx412_pad_ops = { 1000 .enum_mbus_code = imx412_enum_mbus_code, 1001 .enum_frame_size = imx412_enum_frame_size, 1002 .get_fmt = imx412_get_pad_format, 1003 .set_fmt = imx412_set_pad_format, 1004}; 1005 1006static const struct v4l2_subdev_ops imx412_subdev_ops = { 1007 .video = &imx412_video_ops, 1008 .pad = &imx412_pad_ops, 1009}; 1010 1011static const struct v4l2_subdev_internal_ops imx412_internal_ops = { 1012 .init_state = imx412_init_state, 1013}; 1014 1015/** 1016 * imx412_power_on() - Sensor power on sequence 1017 * @dev: pointer to i2c device 1018 * 1019 * Return: 0 if successful, error code otherwise. 1020 */ 1021static int imx412_power_on(struct device *dev) 1022{ 1023 struct v4l2_subdev *sd = dev_get_drvdata(dev); 1024 struct imx412 *imx412 = to_imx412(sd); 1025 int ret; 1026 1027 ret = regulator_bulk_enable(ARRAY_SIZE(imx412_supply_names), 1028 imx412->supplies); 1029 if (ret < 0) { 1030 dev_err(dev, "failed to enable regulators\n"); 1031 return ret; 1032 } 1033 1034 gpiod_set_value_cansleep(imx412->reset_gpio, 0); 1035 1036 ret = clk_prepare_enable(imx412->inclk); 1037 if (ret) { 1038 dev_err(imx412->dev, "fail to enable inclk"); 1039 goto error_reset; 1040 } 1041 1042 usleep_range(1000, 1200); 1043 1044 return 0; 1045 1046error_reset: 1047 gpiod_set_value_cansleep(imx412->reset_gpio, 1); 1048 regulator_bulk_disable(ARRAY_SIZE(imx412_supply_names), 1049 imx412->supplies); 1050 1051 return ret; 1052} 1053 1054/** 1055 * imx412_power_off() - Sensor power off sequence 1056 * @dev: pointer to i2c device 1057 * 1058 * Return: 0 if successful, error code otherwise. 1059 */ 1060static int imx412_power_off(struct device *dev) 1061{ 1062 struct v4l2_subdev *sd = dev_get_drvdata(dev); 1063 struct imx412 *imx412 = to_imx412(sd); 1064 1065 clk_disable_unprepare(imx412->inclk); 1066 1067 gpiod_set_value_cansleep(imx412->reset_gpio, 1); 1068 1069 regulator_bulk_disable(ARRAY_SIZE(imx412_supply_names), 1070 imx412->supplies); 1071 1072 return 0; 1073} 1074 1075/** 1076 * imx412_init_controls() - Initialize sensor subdevice controls 1077 * @imx412: pointer to imx412 device 1078 * 1079 * Return: 0 if successful, error code otherwise. 1080 */ 1081static int imx412_init_controls(struct imx412 *imx412) 1082{ 1083 struct v4l2_ctrl_handler *ctrl_hdlr = &imx412->ctrl_handler; 1084 const struct imx412_mode *mode = imx412->cur_mode; 1085 u32 lpfr; 1086 int ret; 1087 1088 ret = v4l2_ctrl_handler_init(ctrl_hdlr, 6); 1089 if (ret) 1090 return ret; 1091 1092 /* Serialize controls with sensor device */ 1093 ctrl_hdlr->lock = &imx412->mutex; 1094 1095 /* Initialize exposure and gain */ 1096 lpfr = mode->vblank + mode->height; 1097 imx412->exp_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, 1098 &imx412_ctrl_ops, 1099 V4L2_CID_EXPOSURE, 1100 IMX412_EXPOSURE_MIN, 1101 lpfr - IMX412_EXPOSURE_OFFSET, 1102 IMX412_EXPOSURE_STEP, 1103 IMX412_EXPOSURE_DEFAULT); 1104 1105 imx412->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, 1106 &imx412_ctrl_ops, 1107 V4L2_CID_ANALOGUE_GAIN, 1108 IMX412_AGAIN_MIN, 1109 IMX412_AGAIN_MAX, 1110 IMX412_AGAIN_STEP, 1111 IMX412_AGAIN_DEFAULT); 1112 1113 v4l2_ctrl_cluster(2, &imx412->exp_ctrl); 1114 1115 imx412->vblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, 1116 &imx412_ctrl_ops, 1117 V4L2_CID_VBLANK, 1118 mode->vblank_min, 1119 mode->vblank_max, 1120 1, mode->vblank); 1121 1122 /* Read only controls */ 1123 imx412->pclk_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, 1124 &imx412_ctrl_ops, 1125 V4L2_CID_PIXEL_RATE, 1126 mode->pclk, mode->pclk, 1127 1, mode->pclk); 1128 1129 imx412->link_freq_ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr, 1130 &imx412_ctrl_ops, 1131 V4L2_CID_LINK_FREQ, 1132 ARRAY_SIZE(link_freq) - 1133 1, 1134 mode->link_freq_idx, 1135 link_freq); 1136 if (imx412->link_freq_ctrl) 1137 imx412->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; 1138 1139 imx412->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, 1140 &imx412_ctrl_ops, 1141 V4L2_CID_HBLANK, 1142 IMX412_REG_MIN, 1143 IMX412_REG_MAX, 1144 1, mode->hblank); 1145 if (imx412->hblank_ctrl) 1146 imx412->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; 1147 1148 if (ctrl_hdlr->error) { 1149 dev_err(imx412->dev, "control init failed: %d", 1150 ctrl_hdlr->error); 1151 v4l2_ctrl_handler_free(ctrl_hdlr); 1152 return ctrl_hdlr->error; 1153 } 1154 1155 imx412->sd.ctrl_handler = ctrl_hdlr; 1156 1157 return 0; 1158} 1159 1160/** 1161 * imx412_probe() - I2C client device binding 1162 * @client: pointer to i2c client device 1163 * 1164 * Return: 0 if successful, error code otherwise. 1165 */ 1166static int imx412_probe(struct i2c_client *client) 1167{ 1168 struct imx412 *imx412; 1169 const char *name; 1170 int ret; 1171 1172 imx412 = devm_kzalloc(&client->dev, sizeof(*imx412), GFP_KERNEL); 1173 if (!imx412) 1174 return -ENOMEM; 1175 1176 imx412->dev = &client->dev; 1177 name = device_get_match_data(&client->dev); 1178 if (!name) 1179 return -ENODEV; 1180 1181 /* Initialize subdev */ 1182 v4l2_i2c_subdev_init(&imx412->sd, client, &imx412_subdev_ops); 1183 imx412->sd.internal_ops = &imx412_internal_ops; 1184 1185 ret = imx412_parse_hw_config(imx412); 1186 if (ret) { 1187 dev_err(imx412->dev, "HW configuration is not supported"); 1188 return ret; 1189 } 1190 1191 mutex_init(&imx412->mutex); 1192 1193 ret = imx412_power_on(imx412->dev); 1194 if (ret) { 1195 dev_err(imx412->dev, "failed to power-on the sensor"); 1196 goto error_mutex_destroy; 1197 } 1198 1199 /* Check module identity */ 1200 ret = imx412_detect(imx412); 1201 if (ret) { 1202 dev_err(imx412->dev, "failed to find sensor: %d", ret); 1203 goto error_power_off; 1204 } 1205 1206 /* Set default mode to max resolution */ 1207 imx412->cur_mode = &supported_mode; 1208 imx412->vblank = imx412->cur_mode->vblank; 1209 1210 ret = imx412_init_controls(imx412); 1211 if (ret) { 1212 dev_err(imx412->dev, "failed to init controls: %d", ret); 1213 goto error_power_off; 1214 } 1215 1216 /* Initialize subdev */ 1217 imx412->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; 1218 imx412->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; 1219 1220 v4l2_i2c_subdev_set_name(&imx412->sd, client, name, NULL); 1221 1222 /* Initialize source pad */ 1223 imx412->pad.flags = MEDIA_PAD_FL_SOURCE; 1224 ret = media_entity_pads_init(&imx412->sd.entity, 1, &imx412->pad); 1225 if (ret) { 1226 dev_err(imx412->dev, "failed to init entity pads: %d", ret); 1227 goto error_handler_free; 1228 } 1229 1230 ret = v4l2_async_register_subdev_sensor(&imx412->sd); 1231 if (ret < 0) { 1232 dev_err(imx412->dev, 1233 "failed to register async subdev: %d", ret); 1234 goto error_media_entity; 1235 } 1236 1237 pm_runtime_set_active(imx412->dev); 1238 pm_runtime_enable(imx412->dev); 1239 pm_runtime_idle(imx412->dev); 1240 1241 return 0; 1242 1243error_media_entity: 1244 media_entity_cleanup(&imx412->sd.entity); 1245error_handler_free: 1246 v4l2_ctrl_handler_free(imx412->sd.ctrl_handler); 1247error_power_off: 1248 imx412_power_off(imx412->dev); 1249error_mutex_destroy: 1250 mutex_destroy(&imx412->mutex); 1251 1252 return ret; 1253} 1254 1255/** 1256 * imx412_remove() - I2C client device unbinding 1257 * @client: pointer to I2C client device 1258 * 1259 * Return: 0 if successful, error code otherwise. 1260 */ 1261static void imx412_remove(struct i2c_client *client) 1262{ 1263 struct v4l2_subdev *sd = i2c_get_clientdata(client); 1264 struct imx412 *imx412 = to_imx412(sd); 1265 1266 v4l2_async_unregister_subdev(sd); 1267 media_entity_cleanup(&sd->entity); 1268 v4l2_ctrl_handler_free(sd->ctrl_handler); 1269 1270 pm_runtime_disable(&client->dev); 1271 if (!pm_runtime_status_suspended(&client->dev)) 1272 imx412_power_off(&client->dev); 1273 pm_runtime_set_suspended(&client->dev); 1274 1275 mutex_destroy(&imx412->mutex); 1276} 1277 1278static const struct dev_pm_ops imx412_pm_ops = { 1279 SET_RUNTIME_PM_OPS(imx412_power_off, imx412_power_on, NULL) 1280}; 1281 1282static const struct of_device_id imx412_of_match[] = { 1283 { .compatible = "sony,imx412", .data = "imx412" }, 1284 { .compatible = "sony,imx577", .data = "imx577" }, 1285 { } 1286}; 1287 1288MODULE_DEVICE_TABLE(of, imx412_of_match); 1289 1290static struct i2c_driver imx412_driver = { 1291 .probe = imx412_probe, 1292 .remove = imx412_remove, 1293 .driver = { 1294 .name = "imx412", 1295 .pm = &imx412_pm_ops, 1296 .of_match_table = imx412_of_match, 1297 }, 1298}; 1299 1300module_i2c_driver(imx412_driver); 1301 1302MODULE_DESCRIPTION("Sony imx412 sensor driver"); 1303MODULE_LICENSE("GPL"); 1304