1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Device driver for the PMU in Apple PowerBooks and PowerMacs. 4 * 5 * The VIA (versatile interface adapter) interfaces to the PMU, 6 * a 6805 microprocessor core whose primary function is to control 7 * battery charging and system power on the PowerBook 3400 and 2400. 8 * The PMU also controls the ADB (Apple Desktop Bus) which connects 9 * to the keyboard and mouse, as well as the non-volatile RAM 10 * and the RTC (real time clock) chip. 11 * 12 * Copyright (C) 1998 Paul Mackerras and Fabio Riccardi. 13 * Copyright (C) 2001-2002 Benjamin Herrenschmidt 14 * Copyright (C) 2006-2007 Johannes Berg 15 * 16 * THIS DRIVER IS BECOMING A TOTAL MESS ! 17 * - Cleanup atomically disabling reply to PMU events after 18 * a sleep or a freq. switch 19 * 20 */ 21#include <linux/stdarg.h> 22#include <linux/mutex.h> 23#include <linux/types.h> 24#include <linux/errno.h> 25#include <linux/kernel.h> 26#include <linux/delay.h> 27#include <linux/sched/signal.h> 28#include <linux/miscdevice.h> 29#include <linux/blkdev.h> 30#include <linux/pci.h> 31#include <linux/slab.h> 32#include <linux/poll.h> 33#include <linux/adb.h> 34#include <linux/pmu.h> 35#include <linux/cuda.h> 36#include <linux/module.h> 37#include <linux/spinlock.h> 38#include <linux/pm.h> 39#include <linux/proc_fs.h> 40#include <linux/seq_file.h> 41#include <linux/init.h> 42#include <linux/interrupt.h> 43#include <linux/device.h> 44#include <linux/syscore_ops.h> 45#include <linux/freezer.h> 46#include <linux/syscalls.h> 47#include <linux/suspend.h> 48#include <linux/cpu.h> 49#include <linux/compat.h> 50#include <linux/of_address.h> 51#include <linux/of_irq.h> 52#include <linux/uaccess.h> 53#include <linux/pgtable.h> 54#include <asm/machdep.h> 55#include <asm/io.h> 56#include <asm/sections.h> 57#include <asm/irq.h> 58#ifdef CONFIG_PPC_PMAC 59#include <asm/pmac_feature.h> 60#include <asm/pmac_pfunc.h> 61#include <asm/pmac_low_i2c.h> 62#include <asm/mmu_context.h> 63#include <asm/cputable.h> 64#include <asm/time.h> 65#include <asm/backlight.h> 66#else 67#include <asm/macintosh.h> 68#include <asm/macints.h> 69#include <asm/mac_via.h> 70#endif 71 72#include "via-pmu-event.h" 73 74/* Some compile options */ 75#undef DEBUG_SLEEP 76 77/* How many iterations between battery polls */ 78#define BATTERY_POLLING_COUNT 2 79 80static DEFINE_MUTEX(pmu_info_proc_mutex); 81 82/* VIA registers - spaced 0x200 bytes apart */ 83#define RS 0x200 /* skip between registers */ 84#define B 0 /* B-side data */ 85#define A RS /* A-side data */ 86#define DIRB (2*RS) /* B-side direction (1=output) */ 87#define DIRA (3*RS) /* A-side direction (1=output) */ 88#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */ 89#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */ 90#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */ 91#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */ 92#define T2CL (8*RS) /* Timer 2 ctr/latch (low 8 bits) */ 93#define T2CH (9*RS) /* Timer 2 counter (high 8 bits) */ 94#define SR (10*RS) /* Shift register */ 95#define ACR (11*RS) /* Auxiliary control register */ 96#define PCR (12*RS) /* Peripheral control register */ 97#define IFR (13*RS) /* Interrupt flag register */ 98#define IER (14*RS) /* Interrupt enable register */ 99#define ANH (15*RS) /* A-side data, no handshake */ 100 101/* Bits in B data register: both active low */ 102#ifdef CONFIG_PPC_PMAC 103#define TACK 0x08 /* Transfer acknowledge (input) */ 104#define TREQ 0x10 /* Transfer request (output) */ 105#else 106#define TACK 0x02 107#define TREQ 0x04 108#endif 109 110/* Bits in ACR */ 111#define SR_CTRL 0x1c /* Shift register control bits */ 112#define SR_EXT 0x0c /* Shift on external clock */ 113#define SR_OUT 0x10 /* Shift out if 1 */ 114 115/* Bits in IFR and IER */ 116#define IER_SET 0x80 /* set bits in IER */ 117#define IER_CLR 0 /* clear bits in IER */ 118#define SR_INT 0x04 /* Shift register full/empty */ 119#define CB2_INT 0x08 120#define CB1_INT 0x10 /* transition on CB1 input */ 121 122static volatile enum pmu_state { 123 uninitialized = 0, 124 idle, 125 sending, 126 intack, 127 reading, 128 reading_intr, 129 locked, 130} pmu_state; 131 132static volatile enum int_data_state { 133 int_data_empty, 134 int_data_fill, 135 int_data_ready, 136 int_data_flush 137} int_data_state[2] = { int_data_empty, int_data_empty }; 138 139static struct adb_request *current_req; 140static struct adb_request *last_req; 141static struct adb_request *req_awaiting_reply; 142static unsigned char interrupt_data[2][32]; 143static int interrupt_data_len[2]; 144static int int_data_last; 145static unsigned char *reply_ptr; 146static int data_index; 147static int data_len; 148static volatile int adb_int_pending; 149static volatile int disable_poll; 150static int pmu_kind = PMU_UNKNOWN; 151static int pmu_fully_inited; 152static int pmu_has_adb; 153#ifdef CONFIG_PPC_PMAC 154static volatile unsigned char __iomem *via1; 155static volatile unsigned char __iomem *via2; 156static struct device_node *vias; 157static struct device_node *gpio_node; 158#endif 159static unsigned char __iomem *gpio_reg; 160static int gpio_irq = 0; 161static int gpio_irq_enabled = -1; 162static volatile int pmu_suspended; 163static DEFINE_SPINLOCK(pmu_lock); 164static u8 pmu_intr_mask; 165static int pmu_version; 166static int drop_interrupts; 167#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32) 168static int option_lid_wakeup = 1; 169#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */ 170static unsigned long async_req_locks; 171 172#define NUM_IRQ_STATS 13 173static unsigned int pmu_irq_stats[NUM_IRQ_STATS]; 174 175static struct proc_dir_entry *proc_pmu_root; 176static struct proc_dir_entry *proc_pmu_info; 177static struct proc_dir_entry *proc_pmu_irqstats; 178static struct proc_dir_entry *proc_pmu_options; 179static int option_server_mode; 180 181int pmu_battery_count; 182static int pmu_cur_battery; 183unsigned int pmu_power_flags = PMU_PWR_AC_PRESENT; 184struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES]; 185static int query_batt_timer = BATTERY_POLLING_COUNT; 186static struct adb_request batt_req; 187static struct proc_dir_entry *proc_pmu_batt[PMU_MAX_BATTERIES]; 188 189int asleep; 190 191#ifdef CONFIG_ADB 192static int adb_dev_map; 193static int pmu_adb_flags; 194 195static int pmu_probe(void); 196static int pmu_init(void); 197static int pmu_send_request(struct adb_request *req, int sync); 198static int pmu_adb_autopoll(int devs); 199static int pmu_adb_reset_bus(void); 200#endif /* CONFIG_ADB */ 201 202static int init_pmu(void); 203static void pmu_start(void); 204static irqreturn_t via_pmu_interrupt(int irq, void *arg); 205static irqreturn_t gpio1_interrupt(int irq, void *arg); 206#ifdef CONFIG_PROC_FS 207static int pmu_info_proc_show(struct seq_file *m, void *v); 208static int pmu_irqstats_proc_show(struct seq_file *m, void *v); 209static int pmu_battery_proc_show(struct seq_file *m, void *v); 210#endif 211static void pmu_pass_intr(unsigned char *data, int len); 212static const struct proc_ops pmu_options_proc_ops; 213 214#ifdef CONFIG_ADB 215const struct adb_driver via_pmu_driver = { 216 .name = "PMU", 217 .probe = pmu_probe, 218 .init = pmu_init, 219 .send_request = pmu_send_request, 220 .autopoll = pmu_adb_autopoll, 221 .poll = pmu_poll_adb, 222 .reset_bus = pmu_adb_reset_bus, 223}; 224#endif /* CONFIG_ADB */ 225 226extern void low_sleep_handler(void); 227extern void enable_kernel_altivec(void); 228extern void enable_kernel_fp(void); 229 230#ifdef DEBUG_SLEEP 231int pmu_polled_request(struct adb_request *req); 232void pmu_blink(int n); 233#endif 234 235/* 236 * This table indicates for each PMU opcode: 237 * - the number of data bytes to be sent with the command, or -1 238 * if a length byte should be sent, 239 * - the number of response bytes which the PMU will return, or 240 * -1 if it will send a length byte. 241 */ 242static const s8 pmu_data_len[256][2] = { 243/* 0 1 2 3 4 5 6 7 */ 244/*00*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, 245/*08*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1}, 246/*10*/ { 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, 247/*18*/ { 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0, 0}, 248/*20*/ {-1, 0},{ 0, 0},{ 2, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0}, 249/*28*/ { 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0,-1}, 250/*30*/ { 4, 0},{20, 0},{-1, 0},{ 3, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, 251/*38*/ { 0, 4},{ 0,20},{ 2,-1},{ 2, 1},{ 3,-1},{-1,-1},{-1,-1},{ 4, 0}, 252/*40*/ { 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, 253/*48*/ { 0, 1},{ 0, 1},{-1,-1},{ 1, 0},{ 1, 0},{-1,-1},{-1,-1},{-1,-1}, 254/*50*/ { 1, 0},{ 0, 0},{ 2, 0},{ 2, 0},{-1, 0},{ 1, 0},{ 3, 0},{ 1, 0}, 255/*58*/ { 0, 1},{ 1, 0},{ 0, 2},{ 0, 2},{ 0,-1},{-1,-1},{-1,-1},{-1,-1}, 256/*60*/ { 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, 257/*68*/ { 0, 3},{ 0, 3},{ 0, 2},{ 0, 8},{ 0,-1},{ 0,-1},{-1,-1},{-1,-1}, 258/*70*/ { 1, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, 259/*78*/ { 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{ 5, 1},{ 4, 1},{ 4, 1}, 260/*80*/ { 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, 261/*88*/ { 0, 5},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1}, 262/*90*/ { 1, 0},{ 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, 263/*98*/ { 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1}, 264/*a0*/ { 2, 0},{ 2, 0},{ 2, 0},{ 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0}, 265/*a8*/ { 1, 1},{ 1, 0},{ 3, 0},{ 2, 0},{-1,-1},{-1,-1},{-1,-1},{-1,-1}, 266/*b0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, 267/*b8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1}, 268/*c0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, 269/*c8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1}, 270/*d0*/ { 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, 271/*d8*/ { 1, 1},{ 1, 1},{-1,-1},{-1,-1},{ 0, 1},{ 0,-1},{-1,-1},{-1,-1}, 272/*e0*/ {-1, 0},{ 4, 0},{ 0, 1},{-1, 0},{-1, 0},{ 4, 0},{-1, 0},{-1, 0}, 273/*e8*/ { 3,-1},{-1,-1},{ 0, 1},{-1,-1},{ 0,-1},{-1,-1},{-1,-1},{ 0, 0}, 274/*f0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, 275/*f8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1}, 276}; 277 278static char *pbook_type[] = { 279 "Unknown PowerBook", 280 "PowerBook 2400/3400/3500(G3)", 281 "PowerBook G3 Series", 282 "1999 PowerBook G3", 283 "Core99" 284}; 285 286int __init find_via_pmu(void) 287{ 288#ifdef CONFIG_PPC_PMAC 289 int err; 290 u64 taddr; 291 struct resource res; 292 293 if (pmu_state != uninitialized) 294 return 1; 295 vias = of_find_node_by_name(NULL, "via-pmu"); 296 if (vias == NULL) 297 return 0; 298 299 err = of_address_to_resource(vias, 0, &res); 300 if (err) { 301 printk(KERN_ERR "via-pmu: Error getting \"reg\" property !\n"); 302 goto fail; 303 } 304 taddr = res.start; 305 306 pmu_has_adb = 1; 307 308 pmu_intr_mask = PMU_INT_PCEJECT | 309 PMU_INT_SNDBRT | 310 PMU_INT_ADB | 311 PMU_INT_TICK; 312 313 if (of_node_name_eq(vias->parent, "ohare") || 314 of_device_is_compatible(vias->parent, "ohare")) 315 pmu_kind = PMU_OHARE_BASED; 316 else if (of_device_is_compatible(vias->parent, "paddington")) 317 pmu_kind = PMU_PADDINGTON_BASED; 318 else if (of_device_is_compatible(vias->parent, "heathrow")) 319 pmu_kind = PMU_HEATHROW_BASED; 320 else if (of_device_is_compatible(vias->parent, "Keylargo") 321 || of_device_is_compatible(vias->parent, "K2-Keylargo")) { 322 struct device_node *gpiop; 323 struct device_node *adbp; 324 325 pmu_kind = PMU_KEYLARGO_BASED; 326 adbp = of_find_node_by_type(NULL, "adb"); 327 pmu_has_adb = (adbp != NULL); 328 of_node_put(adbp); 329 pmu_intr_mask = PMU_INT_PCEJECT | 330 PMU_INT_SNDBRT | 331 PMU_INT_ADB | 332 PMU_INT_TICK | 333 PMU_INT_ENVIRONMENT; 334 335 gpiop = of_find_node_by_name(NULL, "gpio"); 336 if (gpiop) { 337 if (!of_address_to_resource(gpiop, 0, &res)) 338 gpio_reg = ioremap(res.start, 0x10); 339 of_node_put(gpiop); 340 } 341 if (gpio_reg == NULL) { 342 printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n"); 343 goto fail; 344 } 345 } else 346 pmu_kind = PMU_UNKNOWN; 347 348 via1 = via2 = ioremap(taddr, 0x2000); 349 if (via1 == NULL) { 350 printk(KERN_ERR "via-pmu: Can't map address !\n"); 351 goto fail_via_remap; 352 } 353 354 out_8(&via1[IER], IER_CLR | 0x7f); /* disable all intrs */ 355 out_8(&via1[IFR], 0x7f); /* clear IFR */ 356 357 pmu_state = idle; 358 359 if (!init_pmu()) 360 goto fail_init; 361 362 sys_ctrler = SYS_CTRLER_PMU; 363 364 return 1; 365 366 fail_init: 367 iounmap(via1); 368 via1 = via2 = NULL; 369 fail_via_remap: 370 iounmap(gpio_reg); 371 gpio_reg = NULL; 372 fail: 373 of_node_put(vias); 374 vias = NULL; 375 pmu_state = uninitialized; 376 return 0; 377#else 378 if (macintosh_config->adb_type != MAC_ADB_PB2) 379 return 0; 380 381 pmu_kind = PMU_UNKNOWN; 382 383 pmu_has_adb = 1; 384 385 pmu_intr_mask = PMU_INT_PCEJECT | 386 PMU_INT_SNDBRT | 387 PMU_INT_ADB | 388 PMU_INT_TICK; 389 390 pmu_state = idle; 391 392 if (!init_pmu()) { 393 pmu_state = uninitialized; 394 return 0; 395 } 396 397 return 1; 398#endif /* !CONFIG_PPC_PMAC */ 399} 400 401#ifdef CONFIG_ADB 402static int pmu_probe(void) 403{ 404 return pmu_state == uninitialized ? -ENODEV : 0; 405} 406 407static int pmu_init(void) 408{ 409 return pmu_state == uninitialized ? -ENODEV : 0; 410} 411#endif /* CONFIG_ADB */ 412 413/* 414 * We can't wait until pmu_init gets called, that happens too late. 415 * It happens after IDE and SCSI initialization, which can take a few 416 * seconds, and by that time the PMU could have given up on us and 417 * turned us off. 418 * Thus this is called with arch_initcall rather than device_initcall. 419 */ 420static int __init via_pmu_start(void) 421{ 422 unsigned int __maybe_unused irq; 423 424 if (pmu_state == uninitialized) 425 return -ENODEV; 426 427 batt_req.complete = 1; 428 429#ifdef CONFIG_PPC_PMAC 430 irq = irq_of_parse_and_map(vias, 0); 431 if (!irq) { 432 printk(KERN_ERR "via-pmu: can't map interrupt\n"); 433 return -ENODEV; 434 } 435 /* We set IRQF_NO_SUSPEND because we don't want the interrupt 436 * to be disabled between the 2 passes of driver suspend, we 437 * control our own disabling for that one 438 */ 439 if (request_irq(irq, via_pmu_interrupt, IRQF_NO_SUSPEND, 440 "VIA-PMU", (void *)0)) { 441 printk(KERN_ERR "via-pmu: can't request irq %d\n", irq); 442 return -ENODEV; 443 } 444 445 if (pmu_kind == PMU_KEYLARGO_BASED) { 446 gpio_node = of_find_node_by_name(NULL, "extint-gpio1"); 447 if (gpio_node == NULL) 448 gpio_node = of_find_node_by_name(NULL, 449 "pmu-interrupt"); 450 if (gpio_node) 451 gpio_irq = irq_of_parse_and_map(gpio_node, 0); 452 453 if (gpio_irq) { 454 if (request_irq(gpio_irq, gpio1_interrupt, 455 IRQF_NO_SUSPEND, "GPIO1 ADB", 456 (void *)0)) 457 printk(KERN_ERR "pmu: can't get irq %d" 458 " (GPIO1)\n", gpio_irq); 459 else 460 gpio_irq_enabled = 1; 461 } 462 } 463 464 /* Enable interrupts */ 465 out_8(&via1[IER], IER_SET | SR_INT | CB1_INT); 466#else 467 if (request_irq(IRQ_MAC_ADB_SR, via_pmu_interrupt, IRQF_NO_SUSPEND, 468 "VIA-PMU-SR", NULL)) { 469 pr_err("%s: couldn't get SR irq\n", __func__); 470 return -ENODEV; 471 } 472 if (request_irq(IRQ_MAC_ADB_CL, via_pmu_interrupt, IRQF_NO_SUSPEND, 473 "VIA-PMU-CL", NULL)) { 474 pr_err("%s: couldn't get CL irq\n", __func__); 475 free_irq(IRQ_MAC_ADB_SR, NULL); 476 return -ENODEV; 477 } 478#endif /* !CONFIG_PPC_PMAC */ 479 480 pmu_fully_inited = 1; 481 482 /* Make sure PMU settle down before continuing. This is _very_ important 483 * since the IDE probe may shut interrupts down for quite a bit of time. If 484 * a PMU communication is pending while this happens, the PMU may timeout 485 * Not that on Core99 machines, the PMU keeps sending us environement 486 * messages, we should find a way to either fix IDE or make it call 487 * pmu_suspend() before masking interrupts. This can also happens while 488 * scolling with some fbdevs. 489 */ 490 do { 491 pmu_poll(); 492 } while (pmu_state != idle); 493 494 return 0; 495} 496 497arch_initcall(via_pmu_start); 498 499/* 500 * This has to be done after pci_init, which is a subsys_initcall. 501 */ 502static int __init via_pmu_dev_init(void) 503{ 504 if (pmu_state == uninitialized) 505 return -ENODEV; 506 507#ifdef CONFIG_PMAC_BACKLIGHT 508 /* Initialize backlight */ 509 pmu_backlight_init(); 510#endif 511 512#ifdef CONFIG_PPC32 513 if (of_machine_is_compatible("AAPL,3400/2400") || 514 of_machine_is_compatible("AAPL,3500")) { 515 int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO, 516 NULL, PMAC_MB_INFO_MODEL, 0); 517 pmu_battery_count = 1; 518 if (mb == PMAC_TYPE_COMET) 519 pmu_batteries[0].flags |= PMU_BATT_TYPE_COMET; 520 else 521 pmu_batteries[0].flags |= PMU_BATT_TYPE_HOOPER; 522 } else if (of_machine_is_compatible("AAPL,PowerBook1998") || 523 of_machine_is_compatible("PowerBook1,1")) { 524 pmu_battery_count = 2; 525 pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART; 526 pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART; 527 } else { 528 struct device_node* prim = 529 of_find_node_by_name(NULL, "power-mgt"); 530 const u32 *prim_info = NULL; 531 if (prim) 532 prim_info = of_get_property(prim, "prim-info", NULL); 533 if (prim_info) { 534 /* Other stuffs here yet unknown */ 535 pmu_battery_count = (prim_info[6] >> 16) & 0xff; 536 pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART; 537 if (pmu_battery_count > 1) 538 pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART; 539 } 540 of_node_put(prim); 541 } 542#endif /* CONFIG_PPC32 */ 543 544 /* Create /proc/pmu */ 545 proc_pmu_root = proc_mkdir("pmu", NULL); 546 if (proc_pmu_root) { 547 long i; 548 549 for (i=0; i<pmu_battery_count; i++) { 550 char title[16]; 551 sprintf(title, "battery_%ld", i); 552 proc_pmu_batt[i] = proc_create_single_data(title, 0, 553 proc_pmu_root, pmu_battery_proc_show, 554 (void *)i); 555 } 556 557 proc_pmu_info = proc_create_single("info", 0, proc_pmu_root, 558 pmu_info_proc_show); 559 proc_pmu_irqstats = proc_create_single("interrupts", 0, 560 proc_pmu_root, pmu_irqstats_proc_show); 561 proc_pmu_options = proc_create("options", 0600, proc_pmu_root, 562 &pmu_options_proc_ops); 563 } 564 return 0; 565} 566 567device_initcall(via_pmu_dev_init); 568 569static int 570init_pmu(void) 571{ 572 int timeout; 573 struct adb_request req; 574 575 /* Negate TREQ. Set TACK to input and TREQ to output. */ 576 out_8(&via2[B], in_8(&via2[B]) | TREQ); 577 out_8(&via2[DIRB], (in_8(&via2[DIRB]) | TREQ) & ~TACK); 578 579 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask); 580 timeout = 100000; 581 while (!req.complete) { 582 if (--timeout < 0) { 583 printk(KERN_ERR "init_pmu: no response from PMU\n"); 584 return 0; 585 } 586 udelay(10); 587 pmu_poll(); 588 } 589 590 /* ack all pending interrupts */ 591 timeout = 100000; 592 interrupt_data[0][0] = 1; 593 while (interrupt_data[0][0] || pmu_state != idle) { 594 if (--timeout < 0) { 595 printk(KERN_ERR "init_pmu: timed out acking intrs\n"); 596 return 0; 597 } 598 if (pmu_state == idle) 599 adb_int_pending = 1; 600 via_pmu_interrupt(0, NULL); 601 udelay(10); 602 } 603 604 /* Tell PMU we are ready. */ 605 if (pmu_kind == PMU_KEYLARGO_BASED) { 606 pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2); 607 while (!req.complete) 608 pmu_poll(); 609 } 610 611 /* Read PMU version */ 612 pmu_request(&req, NULL, 1, PMU_GET_VERSION); 613 pmu_wait_complete(&req); 614 if (req.reply_len > 0) 615 pmu_version = req.reply[0]; 616 617 /* Read server mode setting */ 618 if (pmu_kind == PMU_KEYLARGO_BASED) { 619 pmu_request(&req, NULL, 2, PMU_POWER_EVENTS, 620 PMU_PWR_GET_POWERUP_EVENTS); 621 pmu_wait_complete(&req); 622 if (req.reply_len == 2) { 623 if (req.reply[1] & PMU_PWR_WAKEUP_AC_INSERT) 624 option_server_mode = 1; 625 printk(KERN_INFO "via-pmu: Server Mode is %s\n", 626 option_server_mode ? "enabled" : "disabled"); 627 } 628 } 629 630 printk(KERN_INFO "PMU driver v%d initialized for %s, firmware: %02x\n", 631 PMU_DRIVER_VERSION, pbook_type[pmu_kind], pmu_version); 632 633 return 1; 634} 635 636int 637pmu_get_model(void) 638{ 639 return pmu_kind; 640} 641 642static void pmu_set_server_mode(int server_mode) 643{ 644 struct adb_request req; 645 646 if (pmu_kind != PMU_KEYLARGO_BASED) 647 return; 648 649 option_server_mode = server_mode; 650 pmu_request(&req, NULL, 2, PMU_POWER_EVENTS, PMU_PWR_GET_POWERUP_EVENTS); 651 pmu_wait_complete(&req); 652 if (req.reply_len < 2) 653 return; 654 if (server_mode) 655 pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, 656 PMU_PWR_SET_POWERUP_EVENTS, 657 req.reply[0], PMU_PWR_WAKEUP_AC_INSERT); 658 else 659 pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, 660 PMU_PWR_CLR_POWERUP_EVENTS, 661 req.reply[0], PMU_PWR_WAKEUP_AC_INSERT); 662 pmu_wait_complete(&req); 663} 664 665/* This new version of the code for 2400/3400/3500 powerbooks 666 * is inspired from the implementation in gkrellm-pmu 667 */ 668static void 669done_battery_state_ohare(struct adb_request* req) 670{ 671#ifdef CONFIG_PPC_PMAC 672 /* format: 673 * [0] : flags 674 * 0x01 : AC indicator 675 * 0x02 : charging 676 * 0x04 : battery exist 677 * 0x08 : 678 * 0x10 : 679 * 0x20 : full charged 680 * 0x40 : pcharge reset 681 * 0x80 : battery exist 682 * 683 * [1][2] : battery voltage 684 * [3] : CPU temperature 685 * [4] : battery temperature 686 * [5] : current 687 * [6][7] : pcharge 688 * --tkoba 689 */ 690 unsigned int bat_flags = PMU_BATT_TYPE_HOOPER; 691 long pcharge, charge, vb, vmax, lmax; 692 long vmax_charging, vmax_charged; 693 long amperage, voltage, time, max; 694 int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO, 695 NULL, PMAC_MB_INFO_MODEL, 0); 696 697 if (req->reply[0] & 0x01) 698 pmu_power_flags |= PMU_PWR_AC_PRESENT; 699 else 700 pmu_power_flags &= ~PMU_PWR_AC_PRESENT; 701 702 if (mb == PMAC_TYPE_COMET) { 703 vmax_charged = 189; 704 vmax_charging = 213; 705 lmax = 6500; 706 } else { 707 vmax_charged = 330; 708 vmax_charging = 330; 709 lmax = 6500; 710 } 711 vmax = vmax_charged; 712 713 /* If battery installed */ 714 if (req->reply[0] & 0x04) { 715 bat_flags |= PMU_BATT_PRESENT; 716 if (req->reply[0] & 0x02) 717 bat_flags |= PMU_BATT_CHARGING; 718 vb = (req->reply[1] << 8) | req->reply[2]; 719 voltage = (vb * 265 + 72665) / 10; 720 amperage = req->reply[5]; 721 if ((req->reply[0] & 0x01) == 0) { 722 if (amperage > 200) 723 vb += ((amperage - 200) * 15)/100; 724 } else if (req->reply[0] & 0x02) { 725 vb = (vb * 97) / 100; 726 vmax = vmax_charging; 727 } 728 charge = (100 * vb) / vmax; 729 if (req->reply[0] & 0x40) { 730 pcharge = (req->reply[6] << 8) + req->reply[7]; 731 if (pcharge > lmax) 732 pcharge = lmax; 733 pcharge *= 100; 734 pcharge = 100 - pcharge / lmax; 735 if (pcharge < charge) 736 charge = pcharge; 737 } 738 if (amperage > 0) 739 time = (charge * 16440) / amperage; 740 else 741 time = 0; 742 max = 100; 743 amperage = -amperage; 744 } else 745 charge = max = amperage = voltage = time = 0; 746 747 pmu_batteries[pmu_cur_battery].flags = bat_flags; 748 pmu_batteries[pmu_cur_battery].charge = charge; 749 pmu_batteries[pmu_cur_battery].max_charge = max; 750 pmu_batteries[pmu_cur_battery].amperage = amperage; 751 pmu_batteries[pmu_cur_battery].voltage = voltage; 752 pmu_batteries[pmu_cur_battery].time_remaining = time; 753#endif /* CONFIG_PPC_PMAC */ 754 755 clear_bit(0, &async_req_locks); 756} 757 758static void 759done_battery_state_smart(struct adb_request* req) 760{ 761 /* format: 762 * [0] : format of this structure (known: 3,4,5) 763 * [1] : flags 764 * 765 * format 3 & 4: 766 * 767 * [2] : charge 768 * [3] : max charge 769 * [4] : current 770 * [5] : voltage 771 * 772 * format 5: 773 * 774 * [2][3] : charge 775 * [4][5] : max charge 776 * [6][7] : current 777 * [8][9] : voltage 778 */ 779 780 unsigned int bat_flags = PMU_BATT_TYPE_SMART; 781 int amperage; 782 unsigned int capa, max, voltage; 783 784 if (req->reply[1] & 0x01) 785 pmu_power_flags |= PMU_PWR_AC_PRESENT; 786 else 787 pmu_power_flags &= ~PMU_PWR_AC_PRESENT; 788 789 790 capa = max = amperage = voltage = 0; 791 792 if (req->reply[1] & 0x04) { 793 bat_flags |= PMU_BATT_PRESENT; 794 switch(req->reply[0]) { 795 case 3: 796 case 4: capa = req->reply[2]; 797 max = req->reply[3]; 798 amperage = *((signed char *)&req->reply[4]); 799 voltage = req->reply[5]; 800 break; 801 case 5: capa = (req->reply[2] << 8) | req->reply[3]; 802 max = (req->reply[4] << 8) | req->reply[5]; 803 amperage = *((signed short *)&req->reply[6]); 804 voltage = (req->reply[8] << 8) | req->reply[9]; 805 break; 806 default: 807 pr_warn("pmu.c: unrecognized battery info, " 808 "len: %d, %4ph\n", req->reply_len, 809 req->reply); 810 break; 811 } 812 } 813 814 if ((req->reply[1] & 0x01) && (amperage > 0)) 815 bat_flags |= PMU_BATT_CHARGING; 816 817 pmu_batteries[pmu_cur_battery].flags = bat_flags; 818 pmu_batteries[pmu_cur_battery].charge = capa; 819 pmu_batteries[pmu_cur_battery].max_charge = max; 820 pmu_batteries[pmu_cur_battery].amperage = amperage; 821 pmu_batteries[pmu_cur_battery].voltage = voltage; 822 if (amperage) { 823 if ((req->reply[1] & 0x01) && (amperage > 0)) 824 pmu_batteries[pmu_cur_battery].time_remaining 825 = ((max-capa) * 3600) / amperage; 826 else 827 pmu_batteries[pmu_cur_battery].time_remaining 828 = (capa * 3600) / (-amperage); 829 } else 830 pmu_batteries[pmu_cur_battery].time_remaining = 0; 831 832 pmu_cur_battery = (pmu_cur_battery + 1) % pmu_battery_count; 833 834 clear_bit(0, &async_req_locks); 835} 836 837static void 838query_battery_state(void) 839{ 840 if (test_and_set_bit(0, &async_req_locks)) 841 return; 842 if (pmu_kind == PMU_OHARE_BASED) 843 pmu_request(&batt_req, done_battery_state_ohare, 844 1, PMU_BATTERY_STATE); 845 else 846 pmu_request(&batt_req, done_battery_state_smart, 847 2, PMU_SMART_BATTERY_STATE, pmu_cur_battery+1); 848} 849 850#ifdef CONFIG_PROC_FS 851static int pmu_info_proc_show(struct seq_file *m, void *v) 852{ 853 seq_printf(m, "PMU driver version : %d\n", PMU_DRIVER_VERSION); 854 seq_printf(m, "PMU firmware version : %02x\n", pmu_version); 855 seq_printf(m, "AC Power : %d\n", 856 ((pmu_power_flags & PMU_PWR_AC_PRESENT) != 0) || pmu_battery_count == 0); 857 seq_printf(m, "Battery count : %d\n", pmu_battery_count); 858 859 return 0; 860} 861 862static int pmu_irqstats_proc_show(struct seq_file *m, void *v) 863{ 864 int i; 865 static const char *irq_names[NUM_IRQ_STATS] = { 866 "Unknown interrupt (type 0)", 867 "Unknown interrupt (type 1)", 868 "PC-Card eject button", 869 "Sound/Brightness button", 870 "ADB message", 871 "Battery state change", 872 "Environment interrupt", 873 "Tick timer", 874 "Ghost interrupt (zero len)", 875 "Empty interrupt (empty mask)", 876 "Max irqs in a row", 877 "Total CB1 triggered events", 878 "Total GPIO1 triggered events", 879 }; 880 881 for (i = 0; i < NUM_IRQ_STATS; i++) { 882 seq_printf(m, " %2u: %10u (%s)\n", 883 i, pmu_irq_stats[i], irq_names[i]); 884 } 885 return 0; 886} 887 888static int pmu_battery_proc_show(struct seq_file *m, void *v) 889{ 890 long batnum = (long)m->private; 891 892 seq_putc(m, '\n'); 893 seq_printf(m, "flags : %08x\n", pmu_batteries[batnum].flags); 894 seq_printf(m, "charge : %d\n", pmu_batteries[batnum].charge); 895 seq_printf(m, "max_charge : %d\n", pmu_batteries[batnum].max_charge); 896 seq_printf(m, "current : %d\n", pmu_batteries[batnum].amperage); 897 seq_printf(m, "voltage : %d\n", pmu_batteries[batnum].voltage); 898 seq_printf(m, "time rem. : %d\n", pmu_batteries[batnum].time_remaining); 899 return 0; 900} 901 902static int pmu_options_proc_show(struct seq_file *m, void *v) 903{ 904#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32) 905 if (pmu_kind == PMU_KEYLARGO_BASED && 906 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0) 907 seq_printf(m, "lid_wakeup=%d\n", option_lid_wakeup); 908#endif 909 if (pmu_kind == PMU_KEYLARGO_BASED) 910 seq_printf(m, "server_mode=%d\n", option_server_mode); 911 912 return 0; 913} 914 915static int pmu_options_proc_open(struct inode *inode, struct file *file) 916{ 917 return single_open(file, pmu_options_proc_show, NULL); 918} 919 920static ssize_t pmu_options_proc_write(struct file *file, 921 const char __user *buffer, size_t count, loff_t *pos) 922{ 923 char tmp[33]; 924 char *label, *val; 925 size_t fcount = count; 926 927 if (!count) 928 return -EINVAL; 929 if (count > 32) 930 count = 32; 931 if (copy_from_user(tmp, buffer, count)) 932 return -EFAULT; 933 tmp[count] = 0; 934 935 label = tmp; 936 while(*label == ' ') 937 label++; 938 val = label; 939 while(*val && (*val != '=')) { 940 if (*val == ' ') 941 *val = 0; 942 val++; 943 } 944 if ((*val) == 0) 945 return -EINVAL; 946 *(val++) = 0; 947 while(*val == ' ') 948 val++; 949#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32) 950 if (pmu_kind == PMU_KEYLARGO_BASED && 951 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0) 952 if (!strcmp(label, "lid_wakeup")) 953 option_lid_wakeup = ((*val) == '1'); 954#endif 955 if (pmu_kind == PMU_KEYLARGO_BASED && !strcmp(label, "server_mode")) { 956 int new_value; 957 new_value = ((*val) == '1'); 958 if (new_value != option_server_mode) 959 pmu_set_server_mode(new_value); 960 } 961 return fcount; 962} 963 964static const struct proc_ops pmu_options_proc_ops = { 965 .proc_open = pmu_options_proc_open, 966 .proc_read = seq_read, 967 .proc_lseek = seq_lseek, 968 .proc_release = single_release, 969 .proc_write = pmu_options_proc_write, 970}; 971#endif 972 973#ifdef CONFIG_ADB 974/* Send an ADB command */ 975static int pmu_send_request(struct adb_request *req, int sync) 976{ 977 int i, ret; 978 979 if (pmu_state == uninitialized || !pmu_fully_inited) { 980 req->complete = 1; 981 return -ENXIO; 982 } 983 984 ret = -EINVAL; 985 986 switch (req->data[0]) { 987 case PMU_PACKET: 988 for (i = 0; i < req->nbytes - 1; ++i) 989 req->data[i] = req->data[i+1]; 990 --req->nbytes; 991 if (pmu_data_len[req->data[0]][1] != 0) { 992 req->reply[0] = ADB_RET_OK; 993 req->reply_len = 1; 994 } else 995 req->reply_len = 0; 996 ret = pmu_queue_request(req); 997 break; 998 case CUDA_PACKET: 999 switch (req->data[1]) { 1000 case CUDA_GET_TIME: 1001 if (req->nbytes != 2) 1002 break; 1003 req->data[0] = PMU_READ_RTC; 1004 req->nbytes = 1; 1005 req->reply_len = 3; 1006 req->reply[0] = CUDA_PACKET; 1007 req->reply[1] = 0; 1008 req->reply[2] = CUDA_GET_TIME; 1009 ret = pmu_queue_request(req); 1010 break; 1011 case CUDA_SET_TIME: 1012 if (req->nbytes != 6) 1013 break; 1014 req->data[0] = PMU_SET_RTC; 1015 req->nbytes = 5; 1016 for (i = 1; i <= 4; ++i) 1017 req->data[i] = req->data[i+1]; 1018 req->reply_len = 3; 1019 req->reply[0] = CUDA_PACKET; 1020 req->reply[1] = 0; 1021 req->reply[2] = CUDA_SET_TIME; 1022 ret = pmu_queue_request(req); 1023 break; 1024 } 1025 break; 1026 case ADB_PACKET: 1027 if (!pmu_has_adb) 1028 return -ENXIO; 1029 for (i = req->nbytes - 1; i > 1; --i) 1030 req->data[i+2] = req->data[i]; 1031 req->data[3] = req->nbytes - 2; 1032 req->data[2] = pmu_adb_flags; 1033 /*req->data[1] = req->data[1];*/ 1034 req->data[0] = PMU_ADB_CMD; 1035 req->nbytes += 2; 1036 req->reply_expected = 1; 1037 req->reply_len = 0; 1038 ret = pmu_queue_request(req); 1039 break; 1040 } 1041 if (ret) { 1042 req->complete = 1; 1043 return ret; 1044 } 1045 1046 if (sync) 1047 while (!req->complete) 1048 pmu_poll(); 1049 1050 return 0; 1051} 1052 1053/* Enable/disable autopolling */ 1054static int __pmu_adb_autopoll(int devs) 1055{ 1056 struct adb_request req; 1057 1058 if (devs) { 1059 pmu_request(&req, NULL, 5, PMU_ADB_CMD, 0, 0x86, 1060 adb_dev_map >> 8, adb_dev_map); 1061 pmu_adb_flags = 2; 1062 } else { 1063 pmu_request(&req, NULL, 1, PMU_ADB_POLL_OFF); 1064 pmu_adb_flags = 0; 1065 } 1066 while (!req.complete) 1067 pmu_poll(); 1068 return 0; 1069} 1070 1071static int pmu_adb_autopoll(int devs) 1072{ 1073 if (pmu_state == uninitialized || !pmu_fully_inited || !pmu_has_adb) 1074 return -ENXIO; 1075 1076 adb_dev_map = devs; 1077 return __pmu_adb_autopoll(devs); 1078} 1079 1080/* Reset the ADB bus */ 1081static int pmu_adb_reset_bus(void) 1082{ 1083 struct adb_request req; 1084 int save_autopoll = adb_dev_map; 1085 1086 if (pmu_state == uninitialized || !pmu_fully_inited || !pmu_has_adb) 1087 return -ENXIO; 1088 1089 /* anyone got a better idea?? */ 1090 __pmu_adb_autopoll(0); 1091 1092 req.nbytes = 4; 1093 req.done = NULL; 1094 req.data[0] = PMU_ADB_CMD; 1095 req.data[1] = ADB_BUSRESET; 1096 req.data[2] = 0; 1097 req.data[3] = 0; 1098 req.data[4] = 0; 1099 req.reply_len = 0; 1100 req.reply_expected = 1; 1101 if (pmu_queue_request(&req) != 0) { 1102 printk(KERN_ERR "pmu_adb_reset_bus: pmu_queue_request failed\n"); 1103 return -EIO; 1104 } 1105 pmu_wait_complete(&req); 1106 1107 if (save_autopoll != 0) 1108 __pmu_adb_autopoll(save_autopoll); 1109 1110 return 0; 1111} 1112#endif /* CONFIG_ADB */ 1113 1114/* Construct and send a pmu request */ 1115int 1116pmu_request(struct adb_request *req, void (*done)(struct adb_request *), 1117 int nbytes, ...) 1118{ 1119 va_list list; 1120 int i; 1121 1122 if (pmu_state == uninitialized) 1123 return -ENXIO; 1124 1125 if (nbytes < 0 || nbytes > 32) { 1126 printk(KERN_ERR "pmu_request: bad nbytes (%d)\n", nbytes); 1127 req->complete = 1; 1128 return -EINVAL; 1129 } 1130 req->nbytes = nbytes; 1131 req->done = done; 1132 va_start(list, nbytes); 1133 for (i = 0; i < nbytes; ++i) 1134 req->data[i] = va_arg(list, int); 1135 va_end(list); 1136 req->reply_len = 0; 1137 req->reply_expected = 0; 1138 return pmu_queue_request(req); 1139} 1140 1141int 1142pmu_queue_request(struct adb_request *req) 1143{ 1144 unsigned long flags; 1145 int nsend; 1146 1147 if (pmu_state == uninitialized) { 1148 req->complete = 1; 1149 return -ENXIO; 1150 } 1151 if (req->nbytes <= 0) { 1152 req->complete = 1; 1153 return 0; 1154 } 1155 nsend = pmu_data_len[req->data[0]][0]; 1156 if (nsend >= 0 && req->nbytes != nsend + 1) { 1157 req->complete = 1; 1158 return -EINVAL; 1159 } 1160 1161 req->next = NULL; 1162 req->sent = 0; 1163 req->complete = 0; 1164 1165 spin_lock_irqsave(&pmu_lock, flags); 1166 if (current_req) { 1167 last_req->next = req; 1168 last_req = req; 1169 } else { 1170 current_req = req; 1171 last_req = req; 1172 if (pmu_state == idle) 1173 pmu_start(); 1174 } 1175 spin_unlock_irqrestore(&pmu_lock, flags); 1176 1177 return 0; 1178} 1179 1180static inline void 1181wait_for_ack(void) 1182{ 1183 /* Sightly increased the delay, I had one occurrence of the message 1184 * reported 1185 */ 1186 int timeout = 4000; 1187 while ((in_8(&via2[B]) & TACK) == 0) { 1188 if (--timeout < 0) { 1189 printk(KERN_ERR "PMU not responding (!ack)\n"); 1190 return; 1191 } 1192 udelay(10); 1193 } 1194} 1195 1196/* New PMU seems to be very sensitive to those timings, so we make sure 1197 * PCI is flushed immediately */ 1198static inline void 1199send_byte(int x) 1200{ 1201 out_8(&via1[ACR], in_8(&via1[ACR]) | SR_OUT | SR_EXT); 1202 out_8(&via1[SR], x); 1203 out_8(&via2[B], in_8(&via2[B]) & ~TREQ); /* assert TREQ */ 1204 (void)in_8(&via2[B]); 1205} 1206 1207static inline void 1208recv_byte(void) 1209{ 1210 out_8(&via1[ACR], (in_8(&via1[ACR]) & ~SR_OUT) | SR_EXT); 1211 in_8(&via1[SR]); /* resets SR */ 1212 out_8(&via2[B], in_8(&via2[B]) & ~TREQ); 1213 (void)in_8(&via2[B]); 1214} 1215 1216static inline void 1217pmu_done(struct adb_request *req) 1218{ 1219 void (*done)(struct adb_request *) = req->done; 1220 mb(); 1221 req->complete = 1; 1222 /* Here, we assume that if the request has a done member, the 1223 * struct request will survive to setting req->complete to 1 1224 */ 1225 if (done) 1226 (*done)(req); 1227} 1228 1229static void 1230pmu_start(void) 1231{ 1232 struct adb_request *req; 1233 1234 /* assert pmu_state == idle */ 1235 /* get the packet to send */ 1236 req = current_req; 1237 if (!req || pmu_state != idle 1238 || (/*req->reply_expected && */req_awaiting_reply)) 1239 return; 1240 1241 pmu_state = sending; 1242 data_index = 1; 1243 data_len = pmu_data_len[req->data[0]][0]; 1244 1245 /* Sounds safer to make sure ACK is high before writing. This helped 1246 * kill a problem with ADB and some iBooks 1247 */ 1248 wait_for_ack(); 1249 /* set the shift register to shift out and send a byte */ 1250 send_byte(req->data[0]); 1251} 1252 1253void 1254pmu_poll(void) 1255{ 1256 if (pmu_state == uninitialized) 1257 return; 1258 if (disable_poll) 1259 return; 1260 via_pmu_interrupt(0, NULL); 1261} 1262 1263void 1264pmu_poll_adb(void) 1265{ 1266 if (pmu_state == uninitialized) 1267 return; 1268 if (disable_poll) 1269 return; 1270 /* Kicks ADB read when PMU is suspended */ 1271 adb_int_pending = 1; 1272 do { 1273 via_pmu_interrupt(0, NULL); 1274 } while (pmu_suspended && (adb_int_pending || pmu_state != idle 1275 || req_awaiting_reply)); 1276} 1277 1278void 1279pmu_wait_complete(struct adb_request *req) 1280{ 1281 if (pmu_state == uninitialized) 1282 return; 1283 while((pmu_state != idle && pmu_state != locked) || !req->complete) 1284 via_pmu_interrupt(0, NULL); 1285} 1286 1287/* This function loops until the PMU is idle and prevents it from 1288 * anwsering to ADB interrupts. pmu_request can still be called. 1289 * This is done to avoid spurrious shutdowns when we know we'll have 1290 * interrupts switched off for a long time 1291 */ 1292void 1293pmu_suspend(void) 1294{ 1295 unsigned long flags; 1296 1297 if (pmu_state == uninitialized) 1298 return; 1299 1300 spin_lock_irqsave(&pmu_lock, flags); 1301 pmu_suspended++; 1302 if (pmu_suspended > 1) { 1303 spin_unlock_irqrestore(&pmu_lock, flags); 1304 return; 1305 } 1306 1307 do { 1308 spin_unlock_irqrestore(&pmu_lock, flags); 1309 if (req_awaiting_reply) 1310 adb_int_pending = 1; 1311 via_pmu_interrupt(0, NULL); 1312 spin_lock_irqsave(&pmu_lock, flags); 1313 if (!adb_int_pending && pmu_state == idle && !req_awaiting_reply) { 1314 if (gpio_irq >= 0) 1315 disable_irq_nosync(gpio_irq); 1316 out_8(&via1[IER], CB1_INT | IER_CLR); 1317 spin_unlock_irqrestore(&pmu_lock, flags); 1318 break; 1319 } 1320 } while (1); 1321} 1322 1323void 1324pmu_resume(void) 1325{ 1326 unsigned long flags; 1327 1328 if (pmu_state == uninitialized || pmu_suspended < 1) 1329 return; 1330 1331 spin_lock_irqsave(&pmu_lock, flags); 1332 pmu_suspended--; 1333 if (pmu_suspended > 0) { 1334 spin_unlock_irqrestore(&pmu_lock, flags); 1335 return; 1336 } 1337 adb_int_pending = 1; 1338 if (gpio_irq >= 0) 1339 enable_irq(gpio_irq); 1340 out_8(&via1[IER], CB1_INT | IER_SET); 1341 spin_unlock_irqrestore(&pmu_lock, flags); 1342 pmu_poll(); 1343} 1344 1345/* Interrupt data could be the result data from an ADB cmd */ 1346static void 1347pmu_handle_data(unsigned char *data, int len) 1348{ 1349 unsigned char ints; 1350 int idx; 1351 int i = 0; 1352 1353 asleep = 0; 1354 if (drop_interrupts || len < 1) { 1355 adb_int_pending = 0; 1356 pmu_irq_stats[8]++; 1357 return; 1358 } 1359 1360 /* Get PMU interrupt mask */ 1361 ints = data[0]; 1362 1363 /* Record zero interrupts for stats */ 1364 if (ints == 0) 1365 pmu_irq_stats[9]++; 1366 1367 /* Hack to deal with ADB autopoll flag */ 1368 if (ints & PMU_INT_ADB) 1369 ints &= ~(PMU_INT_ADB_AUTO | PMU_INT_AUTO_SRQ_POLL); 1370 1371next: 1372 if (ints == 0) { 1373 if (i > pmu_irq_stats[10]) 1374 pmu_irq_stats[10] = i; 1375 return; 1376 } 1377 i++; 1378 1379 idx = ffs(ints) - 1; 1380 ints &= ~BIT(idx); 1381 1382 pmu_irq_stats[idx]++; 1383 1384 /* Note: for some reason, we get an interrupt with len=1, 1385 * data[0]==0 after each normal ADB interrupt, at least 1386 * on the Pismo. Still investigating... --BenH 1387 */ 1388 switch (BIT(idx)) { 1389 case PMU_INT_ADB: 1390 if ((data[0] & PMU_INT_ADB_AUTO) == 0) { 1391 struct adb_request *req = req_awaiting_reply; 1392 if (!req) { 1393 printk(KERN_ERR "PMU: extra ADB reply\n"); 1394 return; 1395 } 1396 req_awaiting_reply = NULL; 1397 if (len <= 2) 1398 req->reply_len = 0; 1399 else { 1400 memcpy(req->reply, data + 1, len - 1); 1401 req->reply_len = len - 1; 1402 } 1403 pmu_done(req); 1404 } else { 1405#ifdef CONFIG_XMON 1406 if (len == 4 && data[1] == 0x2c) { 1407 extern int xmon_wants_key, xmon_adb_keycode; 1408 if (xmon_wants_key) { 1409 xmon_adb_keycode = data[2]; 1410 return; 1411 } 1412 } 1413#endif /* CONFIG_XMON */ 1414#ifdef CONFIG_ADB 1415 /* 1416 * XXX On the [23]400 the PMU gives us an up 1417 * event for keycodes 0x74 or 0x75 when the PC 1418 * card eject buttons are released, so we 1419 * ignore those events. 1420 */ 1421 if (!(pmu_kind == PMU_OHARE_BASED && len == 4 1422 && data[1] == 0x2c && data[3] == 0xff 1423 && (data[2] & ~1) == 0xf4)) 1424 adb_input(data+1, len-1, 1); 1425#endif /* CONFIG_ADB */ 1426 } 1427 break; 1428 1429 /* Sound/brightness button pressed */ 1430 case PMU_INT_SNDBRT: 1431#ifdef CONFIG_PMAC_BACKLIGHT 1432 if (len == 3) 1433 pmac_backlight_set_legacy_brightness_pmu(data[1] >> 4); 1434#endif 1435 break; 1436 1437 /* Tick interrupt */ 1438 case PMU_INT_TICK: 1439 /* Environment or tick interrupt, query batteries */ 1440 if (pmu_battery_count) { 1441 if ((--query_batt_timer) == 0) { 1442 query_battery_state(); 1443 query_batt_timer = BATTERY_POLLING_COUNT; 1444 } 1445 } 1446 break; 1447 1448 case PMU_INT_ENVIRONMENT: 1449 if (pmu_battery_count) 1450 query_battery_state(); 1451 pmu_pass_intr(data, len); 1452 /* len == 6 is probably a bad check. But how do I 1453 * know what PMU versions send what events here? */ 1454 if (IS_ENABLED(CONFIG_ADB_PMU_EVENT) && len == 6) { 1455 via_pmu_event(PMU_EVT_POWER, !!(data[1]&8)); 1456 via_pmu_event(PMU_EVT_LID, data[1]&1); 1457 } 1458 break; 1459 1460 default: 1461 pmu_pass_intr(data, len); 1462 } 1463 goto next; 1464} 1465 1466static struct adb_request* 1467pmu_sr_intr(void) 1468{ 1469 struct adb_request *req; 1470 int bite = 0; 1471 1472 if (in_8(&via2[B]) & TREQ) { 1473 printk(KERN_ERR "PMU: spurious SR intr (%x)\n", in_8(&via2[B])); 1474 return NULL; 1475 } 1476 /* The ack may not yet be low when we get the interrupt */ 1477 while ((in_8(&via2[B]) & TACK) != 0) 1478 ; 1479 1480 /* if reading grab the byte, and reset the interrupt */ 1481 if (pmu_state == reading || pmu_state == reading_intr) 1482 bite = in_8(&via1[SR]); 1483 1484 /* reset TREQ and wait for TACK to go high */ 1485 out_8(&via2[B], in_8(&via2[B]) | TREQ); 1486 wait_for_ack(); 1487 1488 switch (pmu_state) { 1489 case sending: 1490 req = current_req; 1491 if (data_len < 0) { 1492 data_len = req->nbytes - 1; 1493 send_byte(data_len); 1494 break; 1495 } 1496 if (data_index <= data_len) { 1497 send_byte(req->data[data_index++]); 1498 break; 1499 } 1500 req->sent = 1; 1501 data_len = pmu_data_len[req->data[0]][1]; 1502 if (data_len == 0) { 1503 pmu_state = idle; 1504 current_req = req->next; 1505 if (req->reply_expected) 1506 req_awaiting_reply = req; 1507 else 1508 return req; 1509 } else { 1510 pmu_state = reading; 1511 data_index = 0; 1512 reply_ptr = req->reply + req->reply_len; 1513 recv_byte(); 1514 } 1515 break; 1516 1517 case intack: 1518 data_index = 0; 1519 data_len = -1; 1520 pmu_state = reading_intr; 1521 reply_ptr = interrupt_data[int_data_last]; 1522 recv_byte(); 1523 if (gpio_irq >= 0 && !gpio_irq_enabled) { 1524 enable_irq(gpio_irq); 1525 gpio_irq_enabled = 1; 1526 } 1527 break; 1528 1529 case reading: 1530 case reading_intr: 1531 if (data_len == -1) { 1532 data_len = bite; 1533 if (bite > 32) 1534 printk(KERN_ERR "PMU: bad reply len %d\n", bite); 1535 } else if (data_index < 32) { 1536 reply_ptr[data_index++] = bite; 1537 } 1538 if (data_index < data_len) { 1539 recv_byte(); 1540 break; 1541 } 1542 1543 if (pmu_state == reading_intr) { 1544 pmu_state = idle; 1545 int_data_state[int_data_last] = int_data_ready; 1546 interrupt_data_len[int_data_last] = data_len; 1547 } else { 1548 req = current_req; 1549 /* 1550 * For PMU sleep and freq change requests, we lock the 1551 * PMU until it's explicitly unlocked. This avoids any 1552 * spurrious event polling getting in 1553 */ 1554 current_req = req->next; 1555 req->reply_len += data_index; 1556 if (req->data[0] == PMU_SLEEP || req->data[0] == PMU_CPU_SPEED) 1557 pmu_state = locked; 1558 else 1559 pmu_state = idle; 1560 return req; 1561 } 1562 break; 1563 1564 default: 1565 printk(KERN_ERR "via_pmu_interrupt: unknown state %d?\n", 1566 pmu_state); 1567 } 1568 return NULL; 1569} 1570 1571static irqreturn_t 1572via_pmu_interrupt(int irq, void *arg) 1573{ 1574 unsigned long flags; 1575 int intr; 1576 int nloop = 0; 1577 int int_data = -1; 1578 struct adb_request *req = NULL; 1579 int handled = 0; 1580 1581 /* This is a bit brutal, we can probably do better */ 1582 spin_lock_irqsave(&pmu_lock, flags); 1583 ++disable_poll; 1584 1585 for (;;) { 1586 /* On 68k Macs, VIA interrupts are dispatched individually. 1587 * Unless we are polling, the relevant IRQ flag has already 1588 * been cleared. 1589 */ 1590 intr = 0; 1591 if (IS_ENABLED(CONFIG_PPC_PMAC) || !irq) { 1592 intr = in_8(&via1[IFR]) & (SR_INT | CB1_INT); 1593 out_8(&via1[IFR], intr); 1594 } 1595#ifndef CONFIG_PPC_PMAC 1596 switch (irq) { 1597 case IRQ_MAC_ADB_CL: 1598 intr = CB1_INT; 1599 break; 1600 case IRQ_MAC_ADB_SR: 1601 intr = SR_INT; 1602 break; 1603 } 1604#endif 1605 if (intr == 0) 1606 break; 1607 handled = 1; 1608 if (++nloop > 1000) { 1609 printk(KERN_DEBUG "PMU: stuck in intr loop, " 1610 "intr=%x, ier=%x pmu_state=%d\n", 1611 intr, in_8(&via1[IER]), pmu_state); 1612 break; 1613 } 1614 if (intr & CB1_INT) { 1615 adb_int_pending = 1; 1616 pmu_irq_stats[11]++; 1617 } 1618 if (intr & SR_INT) { 1619 req = pmu_sr_intr(); 1620 if (req) 1621 break; 1622 } 1623#ifndef CONFIG_PPC_PMAC 1624 break; 1625#endif 1626 } 1627 1628recheck: 1629 if (pmu_state == idle) { 1630 if (adb_int_pending) { 1631 if (int_data_state[0] == int_data_empty) 1632 int_data_last = 0; 1633 else if (int_data_state[1] == int_data_empty) 1634 int_data_last = 1; 1635 else 1636 goto no_free_slot; 1637 pmu_state = intack; 1638 int_data_state[int_data_last] = int_data_fill; 1639 /* Sounds safer to make sure ACK is high before writing. 1640 * This helped kill a problem with ADB and some iBooks 1641 */ 1642 wait_for_ack(); 1643 send_byte(PMU_INT_ACK); 1644 adb_int_pending = 0; 1645 } else if (current_req) 1646 pmu_start(); 1647 } 1648no_free_slot: 1649 /* Mark the oldest buffer for flushing */ 1650 if (int_data_state[!int_data_last] == int_data_ready) { 1651 int_data_state[!int_data_last] = int_data_flush; 1652 int_data = !int_data_last; 1653 } else if (int_data_state[int_data_last] == int_data_ready) { 1654 int_data_state[int_data_last] = int_data_flush; 1655 int_data = int_data_last; 1656 } 1657 --disable_poll; 1658 spin_unlock_irqrestore(&pmu_lock, flags); 1659 1660 /* Deal with completed PMU requests outside of the lock */ 1661 if (req) { 1662 pmu_done(req); 1663 req = NULL; 1664 } 1665 1666 /* Deal with interrupt datas outside of the lock */ 1667 if (int_data >= 0) { 1668 pmu_handle_data(interrupt_data[int_data], interrupt_data_len[int_data]); 1669 spin_lock_irqsave(&pmu_lock, flags); 1670 ++disable_poll; 1671 int_data_state[int_data] = int_data_empty; 1672 int_data = -1; 1673 goto recheck; 1674 } 1675 1676 return IRQ_RETVAL(handled); 1677} 1678 1679void 1680pmu_unlock(void) 1681{ 1682 unsigned long flags; 1683 1684 spin_lock_irqsave(&pmu_lock, flags); 1685 if (pmu_state == locked) 1686 pmu_state = idle; 1687 adb_int_pending = 1; 1688 spin_unlock_irqrestore(&pmu_lock, flags); 1689} 1690 1691 1692static __maybe_unused irqreturn_t 1693gpio1_interrupt(int irq, void *arg) 1694{ 1695 unsigned long flags; 1696 1697 if ((in_8(gpio_reg + 0x9) & 0x02) == 0) { 1698 spin_lock_irqsave(&pmu_lock, flags); 1699 if (gpio_irq_enabled > 0) { 1700 disable_irq_nosync(gpio_irq); 1701 gpio_irq_enabled = 0; 1702 } 1703 pmu_irq_stats[12]++; 1704 adb_int_pending = 1; 1705 spin_unlock_irqrestore(&pmu_lock, flags); 1706 via_pmu_interrupt(0, NULL); 1707 return IRQ_HANDLED; 1708 } 1709 return IRQ_NONE; 1710} 1711 1712void 1713pmu_enable_irled(int on) 1714{ 1715 struct adb_request req; 1716 1717 if (pmu_state == uninitialized) 1718 return ; 1719 if (pmu_kind == PMU_KEYLARGO_BASED) 1720 return ; 1721 1722 pmu_request(&req, NULL, 2, PMU_POWER_CTRL, PMU_POW_IRLED | 1723 (on ? PMU_POW_ON : PMU_POW_OFF)); 1724 pmu_wait_complete(&req); 1725} 1726 1727/* Offset between Unix time (1970-based) and Mac time (1904-based) */ 1728#define RTC_OFFSET 2082844800 1729 1730time64_t pmu_get_time(void) 1731{ 1732 struct adb_request req; 1733 u32 now; 1734 1735 if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0) 1736 return 0; 1737 pmu_wait_complete(&req); 1738 if (req.reply_len != 4) 1739 pr_err("%s: got %d byte reply\n", __func__, req.reply_len); 1740 now = (req.reply[0] << 24) + (req.reply[1] << 16) + 1741 (req.reply[2] << 8) + req.reply[3]; 1742 return (time64_t)now - RTC_OFFSET; 1743} 1744 1745int pmu_set_rtc_time(struct rtc_time *tm) 1746{ 1747 u32 now; 1748 struct adb_request req; 1749 1750 now = lower_32_bits(rtc_tm_to_time64(tm) + RTC_OFFSET); 1751 if (pmu_request(&req, NULL, 5, PMU_SET_RTC, 1752 now >> 24, now >> 16, now >> 8, now) < 0) 1753 return -ENXIO; 1754 pmu_wait_complete(&req); 1755 if (req.reply_len != 0) 1756 pr_err("%s: got %d byte reply\n", __func__, req.reply_len); 1757 return 0; 1758} 1759 1760void 1761pmu_restart(void) 1762{ 1763 struct adb_request req; 1764 1765 if (pmu_state == uninitialized) 1766 return; 1767 1768 local_irq_disable(); 1769 1770 drop_interrupts = 1; 1771 1772 if (pmu_kind != PMU_KEYLARGO_BASED) { 1773 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB | 1774 PMU_INT_TICK ); 1775 while(!req.complete) 1776 pmu_poll(); 1777 } 1778 1779 pmu_request(&req, NULL, 1, PMU_RESET); 1780 pmu_wait_complete(&req); 1781 for (;;) 1782 ; 1783} 1784 1785void 1786pmu_shutdown(void) 1787{ 1788 struct adb_request req; 1789 1790 if (pmu_state == uninitialized) 1791 return; 1792 1793 local_irq_disable(); 1794 1795 drop_interrupts = 1; 1796 1797 if (pmu_kind != PMU_KEYLARGO_BASED) { 1798 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB | 1799 PMU_INT_TICK ); 1800 pmu_wait_complete(&req); 1801 } else { 1802 /* Disable server mode on shutdown or we'll just 1803 * wake up again 1804 */ 1805 pmu_set_server_mode(0); 1806 } 1807 1808 pmu_request(&req, NULL, 5, PMU_SHUTDOWN, 1809 'M', 'A', 'T', 'T'); 1810 pmu_wait_complete(&req); 1811 for (;;) 1812 ; 1813} 1814 1815int 1816pmu_present(void) 1817{ 1818 return pmu_state != uninitialized; 1819} 1820 1821#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32) 1822/* 1823 * Put the powerbook to sleep. 1824 */ 1825 1826static u32 save_via[8]; 1827static int __fake_sleep; 1828 1829static void 1830save_via_state(void) 1831{ 1832 save_via[0] = in_8(&via1[ANH]); 1833 save_via[1] = in_8(&via1[DIRA]); 1834 save_via[2] = in_8(&via1[B]); 1835 save_via[3] = in_8(&via1[DIRB]); 1836 save_via[4] = in_8(&via1[PCR]); 1837 save_via[5] = in_8(&via1[ACR]); 1838 save_via[6] = in_8(&via1[T1CL]); 1839 save_via[7] = in_8(&via1[T1CH]); 1840} 1841static void 1842restore_via_state(void) 1843{ 1844 out_8(&via1[ANH], save_via[0]); 1845 out_8(&via1[DIRA], save_via[1]); 1846 out_8(&via1[B], save_via[2]); 1847 out_8(&via1[DIRB], save_via[3]); 1848 out_8(&via1[PCR], save_via[4]); 1849 out_8(&via1[ACR], save_via[5]); 1850 out_8(&via1[T1CL], save_via[6]); 1851 out_8(&via1[T1CH], save_via[7]); 1852 out_8(&via1[IER], IER_CLR | 0x7f); /* disable all intrs */ 1853 out_8(&via1[IFR], 0x7f); /* clear IFR */ 1854 out_8(&via1[IER], IER_SET | SR_INT | CB1_INT); 1855} 1856 1857#define GRACKLE_PM (1<<7) 1858#define GRACKLE_DOZE (1<<5) 1859#define GRACKLE_NAP (1<<4) 1860#define GRACKLE_SLEEP (1<<3) 1861 1862static int powerbook_sleep_grackle(void) 1863{ 1864 unsigned long save_l2cr; 1865 unsigned short pmcr1; 1866 struct adb_request req; 1867 struct pci_dev *grackle; 1868 1869 grackle = pci_get_domain_bus_and_slot(0, 0, 0); 1870 if (!grackle) 1871 return -ENODEV; 1872 1873 /* Turn off various things. Darwin does some retry tests here... */ 1874 pmu_request(&req, NULL, 2, PMU_POWER_CTRL0, PMU_POW0_OFF|PMU_POW0_HARD_DRIVE); 1875 pmu_wait_complete(&req); 1876 pmu_request(&req, NULL, 2, PMU_POWER_CTRL, 1877 PMU_POW_OFF|PMU_POW_BACKLIGHT|PMU_POW_IRLED|PMU_POW_MEDIABAY); 1878 pmu_wait_complete(&req); 1879 1880 /* For 750, save backside cache setting and disable it */ 1881 save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ 1882 1883 if (!__fake_sleep) { 1884 /* Ask the PMU to put us to sleep */ 1885 pmu_request(&req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T'); 1886 pmu_wait_complete(&req); 1887 } 1888 1889 /* The VIA is supposed not to be restored correctly*/ 1890 save_via_state(); 1891 /* We shut down some HW */ 1892 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,1); 1893 1894 pci_read_config_word(grackle, 0x70, &pmcr1); 1895 /* Apparently, MacOS uses NAP mode for Grackle ??? */ 1896 pmcr1 &= ~(GRACKLE_DOZE|GRACKLE_SLEEP); 1897 pmcr1 |= GRACKLE_PM|GRACKLE_NAP; 1898 pci_write_config_word(grackle, 0x70, pmcr1); 1899 1900 /* Call low-level ASM sleep handler */ 1901 if (__fake_sleep) 1902 mdelay(5000); 1903 else 1904 low_sleep_handler(); 1905 1906 /* We're awake again, stop grackle PM */ 1907 pci_read_config_word(grackle, 0x70, &pmcr1); 1908 pmcr1 &= ~(GRACKLE_PM|GRACKLE_DOZE|GRACKLE_SLEEP|GRACKLE_NAP); 1909 pci_write_config_word(grackle, 0x70, pmcr1); 1910 1911 pci_dev_put(grackle); 1912 1913 /* Make sure the PMU is idle */ 1914 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,0); 1915 restore_via_state(); 1916 1917 /* Restore L2 cache */ 1918 if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) 1919 _set_L2CR(save_l2cr); 1920 1921 /* Restore userland MMU context */ 1922 switch_mmu_context(NULL, current->active_mm, NULL); 1923 1924 /* Power things up */ 1925 pmu_unlock(); 1926 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask); 1927 pmu_wait_complete(&req); 1928 pmu_request(&req, NULL, 2, PMU_POWER_CTRL0, 1929 PMU_POW0_ON|PMU_POW0_HARD_DRIVE); 1930 pmu_wait_complete(&req); 1931 pmu_request(&req, NULL, 2, PMU_POWER_CTRL, 1932 PMU_POW_ON|PMU_POW_BACKLIGHT|PMU_POW_CHARGER|PMU_POW_IRLED|PMU_POW_MEDIABAY); 1933 pmu_wait_complete(&req); 1934 1935 return 0; 1936} 1937 1938static int 1939powerbook_sleep_Core99(void) 1940{ 1941 unsigned long save_l2cr; 1942 unsigned long save_l3cr; 1943 struct adb_request req; 1944 1945 if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0) { 1946 printk(KERN_ERR "Sleep mode not supported on this machine\n"); 1947 return -ENOSYS; 1948 } 1949 1950 if (num_online_cpus() > 1 || cpu_is_offline(0)) 1951 return -EAGAIN; 1952 1953 /* Stop environment and ADB interrupts */ 1954 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0); 1955 pmu_wait_complete(&req); 1956 1957 /* Tell PMU what events will wake us up */ 1958 pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_CLR_WAKEUP_EVENTS, 1959 0xff, 0xff); 1960 pmu_wait_complete(&req); 1961 pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_SET_WAKEUP_EVENTS, 1962 0, PMU_PWR_WAKEUP_KEY | 1963 (option_lid_wakeup ? PMU_PWR_WAKEUP_LID_OPEN : 0)); 1964 pmu_wait_complete(&req); 1965 1966 /* Save the state of the L2 and L3 caches */ 1967 save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ 1968 save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ 1969 1970 if (!__fake_sleep) { 1971 /* Ask the PMU to put us to sleep */ 1972 pmu_request(&req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T'); 1973 pmu_wait_complete(&req); 1974 } 1975 1976 /* The VIA is supposed not to be restored correctly*/ 1977 save_via_state(); 1978 1979 /* Shut down various ASICs. There's a chance that we can no longer 1980 * talk to the PMU after this, so I moved it to _after_ sending the 1981 * sleep command to it. Still need to be checked. 1982 */ 1983 pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 1); 1984 1985 /* Call low-level ASM sleep handler */ 1986 if (__fake_sleep) 1987 mdelay(5000); 1988 else 1989 low_sleep_handler(); 1990 1991 /* Restore Apple core ASICs state */ 1992 pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 0); 1993 1994 /* Restore VIA */ 1995 restore_via_state(); 1996 1997 /* tweak LPJ before cpufreq is there */ 1998 loops_per_jiffy *= 2; 1999 2000 /* Restore video */ 2001 pmac_call_early_video_resume(); 2002 2003 /* Restore L2 cache */ 2004 if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) 2005 _set_L2CR(save_l2cr); 2006 /* Restore L3 cache */ 2007 if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) 2008 _set_L3CR(save_l3cr); 2009 2010 /* Restore userland MMU context */ 2011 switch_mmu_context(NULL, current->active_mm, NULL); 2012 2013 /* Tell PMU we are ready */ 2014 pmu_unlock(); 2015 pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2); 2016 pmu_wait_complete(&req); 2017 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask); 2018 pmu_wait_complete(&req); 2019 2020 /* Restore LPJ, cpufreq will adjust the cpu frequency */ 2021 loops_per_jiffy /= 2; 2022 2023 return 0; 2024} 2025 2026#define PB3400_MEM_CTRL 0xf8000000 2027#define PB3400_MEM_CTRL_SLEEP 0x70 2028 2029static void __iomem *pb3400_mem_ctrl; 2030 2031static void powerbook_sleep_init_3400(void) 2032{ 2033 /* map in the memory controller registers */ 2034 pb3400_mem_ctrl = ioremap(PB3400_MEM_CTRL, 0x100); 2035 if (pb3400_mem_ctrl == NULL) 2036 printk(KERN_WARNING "ioremap failed: sleep won't be possible"); 2037} 2038 2039static int powerbook_sleep_3400(void) 2040{ 2041 int i, x; 2042 unsigned int hid0; 2043 unsigned long msr; 2044 struct adb_request sleep_req; 2045 unsigned int __iomem *mem_ctrl_sleep; 2046 2047 if (pb3400_mem_ctrl == NULL) 2048 return -ENOMEM; 2049 mem_ctrl_sleep = pb3400_mem_ctrl + PB3400_MEM_CTRL_SLEEP; 2050 2051 /* Set the memory controller to keep the memory refreshed 2052 while we're asleep */ 2053 for (i = 0x403f; i >= 0x4000; --i) { 2054 out_be32(mem_ctrl_sleep, i); 2055 do { 2056 x = (in_be32(mem_ctrl_sleep) >> 16) & 0x3ff; 2057 } while (x == 0); 2058 if (x >= 0x100) 2059 break; 2060 } 2061 2062 /* Ask the PMU to put us to sleep */ 2063 pmu_request(&sleep_req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T'); 2064 pmu_wait_complete(&sleep_req); 2065 pmu_unlock(); 2066 2067 pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 1); 2068 2069 asleep = 1; 2070 2071 /* Put the CPU into sleep mode */ 2072 hid0 = mfspr(SPRN_HID0); 2073 hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP; 2074 mtspr(SPRN_HID0, hid0); 2075 local_irq_enable(); 2076 msr = mfmsr() | MSR_POW; 2077 while (asleep) { 2078 mb(); 2079 mtmsr(msr); 2080 isync(); 2081 } 2082 local_irq_disable(); 2083 2084 /* OK, we're awake again, start restoring things */ 2085 out_be32(mem_ctrl_sleep, 0x3f); 2086 pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 0); 2087 2088 return 0; 2089} 2090 2091#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */ 2092 2093/* 2094 * Support for /dev/pmu device 2095 */ 2096#define RB_SIZE 0x10 2097struct pmu_private { 2098 struct list_head list; 2099 int rb_get; 2100 int rb_put; 2101 struct rb_entry { 2102 unsigned short len; 2103 unsigned char data[16]; 2104 } rb_buf[RB_SIZE]; 2105 wait_queue_head_t wait; 2106 spinlock_t lock; 2107#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) 2108 int backlight_locker; 2109#endif 2110}; 2111 2112static LIST_HEAD(all_pmu_pvt); 2113static DEFINE_SPINLOCK(all_pvt_lock); 2114 2115static void 2116pmu_pass_intr(unsigned char *data, int len) 2117{ 2118 struct pmu_private *pp; 2119 struct list_head *list; 2120 int i; 2121 unsigned long flags; 2122 2123 if (len > sizeof(pp->rb_buf[0].data)) 2124 len = sizeof(pp->rb_buf[0].data); 2125 spin_lock_irqsave(&all_pvt_lock, flags); 2126 for (list = &all_pmu_pvt; (list = list->next) != &all_pmu_pvt; ) { 2127 pp = list_entry(list, struct pmu_private, list); 2128 spin_lock(&pp->lock); 2129 i = pp->rb_put + 1; 2130 if (i >= RB_SIZE) 2131 i = 0; 2132 if (i != pp->rb_get) { 2133 struct rb_entry *rp = &pp->rb_buf[pp->rb_put]; 2134 rp->len = len; 2135 memcpy(rp->data, data, len); 2136 pp->rb_put = i; 2137 wake_up_interruptible(&pp->wait); 2138 } 2139 spin_unlock(&pp->lock); 2140 } 2141 spin_unlock_irqrestore(&all_pvt_lock, flags); 2142} 2143 2144static int 2145pmu_open(struct inode *inode, struct file *file) 2146{ 2147 struct pmu_private *pp; 2148 unsigned long flags; 2149 2150 pp = kmalloc(sizeof(struct pmu_private), GFP_KERNEL); 2151 if (!pp) 2152 return -ENOMEM; 2153 pp->rb_get = pp->rb_put = 0; 2154 spin_lock_init(&pp->lock); 2155 init_waitqueue_head(&pp->wait); 2156 mutex_lock(&pmu_info_proc_mutex); 2157 spin_lock_irqsave(&all_pvt_lock, flags); 2158#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) 2159 pp->backlight_locker = 0; 2160#endif 2161 list_add(&pp->list, &all_pmu_pvt); 2162 spin_unlock_irqrestore(&all_pvt_lock, flags); 2163 file->private_data = pp; 2164 mutex_unlock(&pmu_info_proc_mutex); 2165 return 0; 2166} 2167 2168static ssize_t 2169pmu_read(struct file *file, char __user *buf, 2170 size_t count, loff_t *ppos) 2171{ 2172 struct pmu_private *pp = file->private_data; 2173 DECLARE_WAITQUEUE(wait, current); 2174 unsigned long flags; 2175 int ret = 0; 2176 2177 if (count < 1 || !pp) 2178 return -EINVAL; 2179 2180 spin_lock_irqsave(&pp->lock, flags); 2181 add_wait_queue(&pp->wait, &wait); 2182 set_current_state(TASK_INTERRUPTIBLE); 2183 2184 for (;;) { 2185 ret = -EAGAIN; 2186 if (pp->rb_get != pp->rb_put) { 2187 int i = pp->rb_get; 2188 struct rb_entry *rp = &pp->rb_buf[i]; 2189 ret = rp->len; 2190 spin_unlock_irqrestore(&pp->lock, flags); 2191 if (ret > count) 2192 ret = count; 2193 if (ret > 0 && copy_to_user(buf, rp->data, ret)) 2194 ret = -EFAULT; 2195 if (++i >= RB_SIZE) 2196 i = 0; 2197 spin_lock_irqsave(&pp->lock, flags); 2198 pp->rb_get = i; 2199 } 2200 if (ret >= 0) 2201 break; 2202 if (file->f_flags & O_NONBLOCK) 2203 break; 2204 ret = -ERESTARTSYS; 2205 if (signal_pending(current)) 2206 break; 2207 spin_unlock_irqrestore(&pp->lock, flags); 2208 schedule(); 2209 spin_lock_irqsave(&pp->lock, flags); 2210 } 2211 __set_current_state(TASK_RUNNING); 2212 remove_wait_queue(&pp->wait, &wait); 2213 spin_unlock_irqrestore(&pp->lock, flags); 2214 2215 return ret; 2216} 2217 2218static ssize_t 2219pmu_write(struct file *file, const char __user *buf, 2220 size_t count, loff_t *ppos) 2221{ 2222 return 0; 2223} 2224 2225static __poll_t 2226pmu_fpoll(struct file *filp, poll_table *wait) 2227{ 2228 struct pmu_private *pp = filp->private_data; 2229 __poll_t mask = 0; 2230 unsigned long flags; 2231 2232 if (!pp) 2233 return 0; 2234 poll_wait(filp, &pp->wait, wait); 2235 spin_lock_irqsave(&pp->lock, flags); 2236 if (pp->rb_get != pp->rb_put) 2237 mask |= EPOLLIN; 2238 spin_unlock_irqrestore(&pp->lock, flags); 2239 return mask; 2240} 2241 2242static int 2243pmu_release(struct inode *inode, struct file *file) 2244{ 2245 struct pmu_private *pp = file->private_data; 2246 unsigned long flags; 2247 2248 if (pp) { 2249 file->private_data = NULL; 2250 spin_lock_irqsave(&all_pvt_lock, flags); 2251 list_del(&pp->list); 2252 spin_unlock_irqrestore(&all_pvt_lock, flags); 2253 2254#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) 2255 if (pp->backlight_locker) 2256 pmac_backlight_enable(); 2257#endif 2258 2259 kfree(pp); 2260 } 2261 return 0; 2262} 2263 2264#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32) 2265static void pmac_suspend_disable_irqs(void) 2266{ 2267 /* Call platform functions marked "on sleep" */ 2268 pmac_pfunc_i2c_suspend(); 2269 pmac_pfunc_base_suspend(); 2270} 2271 2272static int powerbook_sleep(suspend_state_t state) 2273{ 2274 int error = 0; 2275 2276 /* Wait for completion of async requests */ 2277 while (!batt_req.complete) 2278 pmu_poll(); 2279 2280 /* Giveup the lazy FPU & vec so we don't have to back them 2281 * up from the low level code 2282 */ 2283 enable_kernel_fp(); 2284 2285#ifdef CONFIG_ALTIVEC 2286 if (cpu_has_feature(CPU_FTR_ALTIVEC)) 2287 enable_kernel_altivec(); 2288#endif /* CONFIG_ALTIVEC */ 2289 2290 switch (pmu_kind) { 2291 case PMU_OHARE_BASED: 2292 error = powerbook_sleep_3400(); 2293 break; 2294 case PMU_HEATHROW_BASED: 2295 case PMU_PADDINGTON_BASED: 2296 error = powerbook_sleep_grackle(); 2297 break; 2298 case PMU_KEYLARGO_BASED: 2299 error = powerbook_sleep_Core99(); 2300 break; 2301 default: 2302 return -ENOSYS; 2303 } 2304 2305 if (error) 2306 return error; 2307 2308 mdelay(100); 2309 2310 return 0; 2311} 2312 2313static void pmac_suspend_enable_irqs(void) 2314{ 2315 /* Force a poll of ADB interrupts */ 2316 adb_int_pending = 1; 2317 via_pmu_interrupt(0, NULL); 2318 2319 mdelay(10); 2320 2321 /* Call platform functions marked "on wake" */ 2322 pmac_pfunc_base_resume(); 2323 pmac_pfunc_i2c_resume(); 2324} 2325 2326static int pmu_sleep_valid(suspend_state_t state) 2327{ 2328 return state == PM_SUSPEND_MEM 2329 && (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) >= 0); 2330} 2331 2332static const struct platform_suspend_ops pmu_pm_ops = { 2333 .enter = powerbook_sleep, 2334 .valid = pmu_sleep_valid, 2335}; 2336 2337static int register_pmu_pm_ops(void) 2338{ 2339 if (pmu_kind == PMU_OHARE_BASED) 2340 powerbook_sleep_init_3400(); 2341 ppc_md.suspend_disable_irqs = pmac_suspend_disable_irqs; 2342 ppc_md.suspend_enable_irqs = pmac_suspend_enable_irqs; 2343 suspend_set_ops(&pmu_pm_ops); 2344 2345 return 0; 2346} 2347 2348device_initcall(register_pmu_pm_ops); 2349#endif 2350 2351static int pmu_ioctl(struct file *filp, 2352 u_int cmd, u_long arg) 2353{ 2354 __u32 __user *argp = (__u32 __user *)arg; 2355 int error = -EINVAL; 2356 2357 switch (cmd) { 2358#ifdef CONFIG_PPC_PMAC 2359 case PMU_IOC_SLEEP: 2360 if (!capable(CAP_SYS_ADMIN)) 2361 return -EACCES; 2362 return pm_suspend(PM_SUSPEND_MEM); 2363 case PMU_IOC_CAN_SLEEP: 2364 if (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) < 0) 2365 return put_user(0, argp); 2366 else 2367 return put_user(1, argp); 2368#endif 2369 2370#ifdef CONFIG_PMAC_BACKLIGHT_LEGACY 2371 /* Compatibility ioctl's for backlight */ 2372 case PMU_IOC_GET_BACKLIGHT: 2373 { 2374 int brightness; 2375 2376 brightness = pmac_backlight_get_legacy_brightness(); 2377 if (brightness < 0) 2378 return brightness; 2379 else 2380 return put_user(brightness, argp); 2381 2382 } 2383 case PMU_IOC_SET_BACKLIGHT: 2384 { 2385 int brightness; 2386 2387 error = get_user(brightness, argp); 2388 if (error) 2389 return error; 2390 2391 return pmac_backlight_set_legacy_brightness(brightness); 2392 } 2393#ifdef CONFIG_INPUT_ADBHID 2394 case PMU_IOC_GRAB_BACKLIGHT: { 2395 struct pmu_private *pp = filp->private_data; 2396 2397 if (pp->backlight_locker) 2398 return 0; 2399 2400 pp->backlight_locker = 1; 2401 pmac_backlight_disable(); 2402 2403 return 0; 2404 } 2405#endif /* CONFIG_INPUT_ADBHID */ 2406#endif /* CONFIG_PMAC_BACKLIGHT_LEGACY */ 2407 2408 case PMU_IOC_GET_MODEL: 2409 return put_user(pmu_kind, argp); 2410 case PMU_IOC_HAS_ADB: 2411 return put_user(pmu_has_adb, argp); 2412 } 2413 return error; 2414} 2415 2416static long pmu_unlocked_ioctl(struct file *filp, 2417 u_int cmd, u_long arg) 2418{ 2419 int ret; 2420 2421 mutex_lock(&pmu_info_proc_mutex); 2422 ret = pmu_ioctl(filp, cmd, arg); 2423 mutex_unlock(&pmu_info_proc_mutex); 2424 2425 return ret; 2426} 2427 2428#ifdef CONFIG_COMPAT 2429#define PMU_IOC_GET_BACKLIGHT32 _IOR('B', 1, compat_size_t) 2430#define PMU_IOC_SET_BACKLIGHT32 _IOW('B', 2, compat_size_t) 2431#define PMU_IOC_GET_MODEL32 _IOR('B', 3, compat_size_t) 2432#define PMU_IOC_HAS_ADB32 _IOR('B', 4, compat_size_t) 2433#define PMU_IOC_CAN_SLEEP32 _IOR('B', 5, compat_size_t) 2434#define PMU_IOC_GRAB_BACKLIGHT32 _IOR('B', 6, compat_size_t) 2435 2436static long compat_pmu_ioctl (struct file *filp, u_int cmd, u_long arg) 2437{ 2438 switch (cmd) { 2439 case PMU_IOC_SLEEP: 2440 break; 2441 case PMU_IOC_GET_BACKLIGHT32: 2442 cmd = PMU_IOC_GET_BACKLIGHT; 2443 break; 2444 case PMU_IOC_SET_BACKLIGHT32: 2445 cmd = PMU_IOC_SET_BACKLIGHT; 2446 break; 2447 case PMU_IOC_GET_MODEL32: 2448 cmd = PMU_IOC_GET_MODEL; 2449 break; 2450 case PMU_IOC_HAS_ADB32: 2451 cmd = PMU_IOC_HAS_ADB; 2452 break; 2453 case PMU_IOC_CAN_SLEEP32: 2454 cmd = PMU_IOC_CAN_SLEEP; 2455 break; 2456 case PMU_IOC_GRAB_BACKLIGHT32: 2457 cmd = PMU_IOC_GRAB_BACKLIGHT; 2458 break; 2459 default: 2460 return -ENOIOCTLCMD; 2461 } 2462 return pmu_unlocked_ioctl(filp, cmd, (unsigned long)compat_ptr(arg)); 2463} 2464#endif 2465 2466static const struct file_operations pmu_device_fops = { 2467 .read = pmu_read, 2468 .write = pmu_write, 2469 .poll = pmu_fpoll, 2470 .unlocked_ioctl = pmu_unlocked_ioctl, 2471#ifdef CONFIG_COMPAT 2472 .compat_ioctl = compat_pmu_ioctl, 2473#endif 2474 .open = pmu_open, 2475 .release = pmu_release, 2476 .llseek = noop_llseek, 2477}; 2478 2479static struct miscdevice pmu_device = { 2480 PMU_MINOR, "pmu", &pmu_device_fops 2481}; 2482 2483static int pmu_device_init(void) 2484{ 2485 if (pmu_state == uninitialized) 2486 return 0; 2487 if (misc_register(&pmu_device) < 0) 2488 printk(KERN_ERR "via-pmu: cannot register misc device.\n"); 2489 return 0; 2490} 2491device_initcall(pmu_device_init); 2492 2493 2494#ifdef DEBUG_SLEEP 2495static inline void 2496polled_handshake(void) 2497{ 2498 via2[B] &= ~TREQ; eieio(); 2499 while ((via2[B] & TACK) != 0) 2500 ; 2501 via2[B] |= TREQ; eieio(); 2502 while ((via2[B] & TACK) == 0) 2503 ; 2504} 2505 2506static inline void 2507polled_send_byte(int x) 2508{ 2509 via1[ACR] |= SR_OUT | SR_EXT; eieio(); 2510 via1[SR] = x; eieio(); 2511 polled_handshake(); 2512} 2513 2514static inline int 2515polled_recv_byte(void) 2516{ 2517 int x; 2518 2519 via1[ACR] = (via1[ACR] & ~SR_OUT) | SR_EXT; eieio(); 2520 x = via1[SR]; eieio(); 2521 polled_handshake(); 2522 x = via1[SR]; eieio(); 2523 return x; 2524} 2525 2526int 2527pmu_polled_request(struct adb_request *req) 2528{ 2529 unsigned long flags; 2530 int i, l, c; 2531 2532 req->complete = 1; 2533 c = req->data[0]; 2534 l = pmu_data_len[c][0]; 2535 if (l >= 0 && req->nbytes != l + 1) 2536 return -EINVAL; 2537 2538 local_irq_save(flags); 2539 while (pmu_state != idle) 2540 pmu_poll(); 2541 2542 while ((via2[B] & TACK) == 0) 2543 ; 2544 polled_send_byte(c); 2545 if (l < 0) { 2546 l = req->nbytes - 1; 2547 polled_send_byte(l); 2548 } 2549 for (i = 1; i <= l; ++i) 2550 polled_send_byte(req->data[i]); 2551 2552 l = pmu_data_len[c][1]; 2553 if (l < 0) 2554 l = polled_recv_byte(); 2555 for (i = 0; i < l; ++i) 2556 req->reply[i + req->reply_len] = polled_recv_byte(); 2557 2558 if (req->done) 2559 (*req->done)(req); 2560 2561 local_irq_restore(flags); 2562 return 0; 2563} 2564 2565/* N.B. This doesn't work on the 3400 */ 2566void pmu_blink(int n) 2567{ 2568 struct adb_request req; 2569 2570 memset(&req, 0, sizeof(req)); 2571 2572 for (; n > 0; --n) { 2573 req.nbytes = 4; 2574 req.done = NULL; 2575 req.data[0] = 0xee; 2576 req.data[1] = 4; 2577 req.data[2] = 0; 2578 req.data[3] = 1; 2579 req.reply[0] = ADB_RET_OK; 2580 req.reply_len = 1; 2581 req.reply_expected = 0; 2582 pmu_polled_request(&req); 2583 mdelay(50); 2584 req.nbytes = 4; 2585 req.done = NULL; 2586 req.data[0] = 0xee; 2587 req.data[1] = 4; 2588 req.data[2] = 0; 2589 req.data[3] = 0; 2590 req.reply[0] = ADB_RET_OK; 2591 req.reply_len = 1; 2592 req.reply_expected = 0; 2593 pmu_polled_request(&req); 2594 mdelay(50); 2595 } 2596 mdelay(50); 2597} 2598#endif /* DEBUG_SLEEP */ 2599 2600#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32) 2601int pmu_sys_suspended; 2602 2603static int pmu_syscore_suspend(void) 2604{ 2605 /* Suspend PMU event interrupts */ 2606 pmu_suspend(); 2607 pmu_sys_suspended = 1; 2608 2609#ifdef CONFIG_PMAC_BACKLIGHT 2610 /* Tell backlight code not to muck around with the chip anymore */ 2611 pmu_backlight_set_sleep(1); 2612#endif 2613 2614 return 0; 2615} 2616 2617static void pmu_syscore_resume(void) 2618{ 2619 struct adb_request req; 2620 2621 if (!pmu_sys_suspended) 2622 return; 2623 2624 /* Tell PMU we are ready */ 2625 pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2); 2626 pmu_wait_complete(&req); 2627 2628#ifdef CONFIG_PMAC_BACKLIGHT 2629 /* Tell backlight code it can use the chip again */ 2630 pmu_backlight_set_sleep(0); 2631#endif 2632 /* Resume PMU event interrupts */ 2633 pmu_resume(); 2634 pmu_sys_suspended = 0; 2635} 2636 2637static struct syscore_ops pmu_syscore_ops = { 2638 .suspend = pmu_syscore_suspend, 2639 .resume = pmu_syscore_resume, 2640}; 2641 2642static int pmu_syscore_register(void) 2643{ 2644 register_syscore_ops(&pmu_syscore_ops); 2645 2646 return 0; 2647} 2648subsys_initcall(pmu_syscore_register); 2649#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */ 2650 2651EXPORT_SYMBOL(pmu_request); 2652EXPORT_SYMBOL(pmu_queue_request); 2653EXPORT_SYMBOL(pmu_poll); 2654EXPORT_SYMBOL(pmu_poll_adb); 2655EXPORT_SYMBOL(pmu_wait_complete); 2656EXPORT_SYMBOL(pmu_suspend); 2657EXPORT_SYMBOL(pmu_resume); 2658EXPORT_SYMBOL(pmu_unlock); 2659#if defined(CONFIG_PPC32) 2660EXPORT_SYMBOL(pmu_enable_irled); 2661EXPORT_SYMBOL(pmu_battery_count); 2662EXPORT_SYMBOL(pmu_batteries); 2663EXPORT_SYMBOL(pmu_power_flags); 2664#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */ 2665 2666