1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * TSC2004/TSC2005 touchscreen driver core
4 *
5 * Copyright (C) 2006-2010 Nokia Corporation
6 * Copyright (C) 2015 QWERTY Embedded Design
7 * Copyright (C) 2015 EMAC Inc.
8 *
9 * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
10 * based on TSC2301 driver by Klaus K. Pedersen <klaus.k.pedersen@nokia.com>
11 */
12
13#include <linux/kernel.h>
14#include <linux/module.h>
15#include <linux/input.h>
16#include <linux/input/touchscreen.h>
17#include <linux/interrupt.h>
18#include <linux/delay.h>
19#include <linux/pm.h>
20#include <linux/of.h>
21#include <linux/regulator/consumer.h>
22#include <linux/regmap.h>
23#include <linux/gpio/consumer.h>
24#include "tsc200x-core.h"
25
26/*
27 * The touchscreen interface operates as follows:
28 *
29 * 1) Pen is pressed against the touchscreen.
30 * 2) TSC200X performs AD conversion.
31 * 3) After the conversion is done TSC200X drives DAV line down.
32 * 4) GPIO IRQ is received and tsc200x_irq_thread() is scheduled.
33 * 5) tsc200x_irq_thread() queues up a transfer to fetch the x, y, z1, z2
34 *    values.
35 * 6) tsc200x_irq_thread() reports coordinates to input layer and sets up
36 *    tsc200x_penup_timer() to be called after TSC200X_PENUP_TIME_MS (40ms).
37 * 7) When the penup timer expires, there have not been touch or DAV interrupts
38 *    during the last 40ms which means the pen has been lifted.
39 *
40 * ESD recovery via a hardware reset is done if the TSC200X doesn't respond
41 * after a configurable period (in ms) of activity. If esd_timeout is 0, the
42 * watchdog is disabled.
43 */
44
45static const struct regmap_range tsc200x_writable_ranges[] = {
46	regmap_reg_range(TSC200X_REG_AUX_HIGH, TSC200X_REG_CFR2),
47};
48
49static const struct regmap_access_table tsc200x_writable_table = {
50	.yes_ranges = tsc200x_writable_ranges,
51	.n_yes_ranges = ARRAY_SIZE(tsc200x_writable_ranges),
52};
53
54const struct regmap_config tsc200x_regmap_config = {
55	.reg_bits = 8,
56	.val_bits = 16,
57	.reg_stride = 0x08,
58	.max_register = 0x78,
59	.read_flag_mask = TSC200X_REG_READ,
60	.write_flag_mask = TSC200X_REG_PND0,
61	.wr_table = &tsc200x_writable_table,
62	.use_single_read = true,
63	.use_single_write = true,
64};
65EXPORT_SYMBOL_GPL(tsc200x_regmap_config);
66
67struct tsc200x_data {
68	u16 x;
69	u16 y;
70	u16 z1;
71	u16 z2;
72} __packed;
73#define TSC200X_DATA_REGS 4
74
75struct tsc200x {
76	struct device           *dev;
77	struct regmap		*regmap;
78	__u16                   bustype;
79
80	struct input_dev	*idev;
81	char			phys[32];
82
83	struct mutex		mutex;
84
85	/* raw copy of previous x,y,z */
86	int			in_x;
87	int			in_y;
88	int                     in_z1;
89	int			in_z2;
90
91	struct touchscreen_properties prop;
92
93	spinlock_t		lock;
94	struct timer_list	penup_timer;
95
96	unsigned int		esd_timeout;
97	struct delayed_work	esd_work;
98	unsigned long		last_valid_interrupt;
99
100	unsigned int		x_plate_ohm;
101
102	bool			opened;
103	bool			suspended;
104
105	bool			pen_down;
106
107	struct regulator	*vio;
108
109	struct gpio_desc	*reset_gpio;
110	int			(*tsc200x_cmd)(struct device *dev, u8 cmd);
111	int			irq;
112};
113
114static void tsc200x_update_pen_state(struct tsc200x *ts,
115				     int x, int y, int pressure)
116{
117	if (pressure) {
118		touchscreen_report_pos(ts->idev, &ts->prop, x, y, false);
119		input_report_abs(ts->idev, ABS_PRESSURE, pressure);
120		if (!ts->pen_down) {
121			input_report_key(ts->idev, BTN_TOUCH, !!pressure);
122			ts->pen_down = true;
123		}
124	} else {
125		input_report_abs(ts->idev, ABS_PRESSURE, 0);
126		if (ts->pen_down) {
127			input_report_key(ts->idev, BTN_TOUCH, 0);
128			ts->pen_down = false;
129		}
130	}
131	input_sync(ts->idev);
132	dev_dbg(ts->dev, "point(%4d,%4d), pressure (%4d)\n", x, y,
133		pressure);
134}
135
136static irqreturn_t tsc200x_irq_thread(int irq, void *_ts)
137{
138	struct tsc200x *ts = _ts;
139	unsigned long flags;
140	unsigned int pressure;
141	struct tsc200x_data tsdata;
142	int error;
143
144	/* read the coordinates */
145	error = regmap_bulk_read(ts->regmap, TSC200X_REG_X, &tsdata,
146				 TSC200X_DATA_REGS);
147	if (unlikely(error))
148		goto out;
149
150	/* validate position */
151	if (unlikely(tsdata.x > MAX_12BIT || tsdata.y > MAX_12BIT))
152		goto out;
153
154	/* Skip reading if the pressure components are out of range */
155	if (unlikely(tsdata.z1 == 0 || tsdata.z2 > MAX_12BIT))
156		goto out;
157	if (unlikely(tsdata.z1 >= tsdata.z2))
158		goto out;
159
160       /*
161	* Skip point if this is a pen down with the exact same values as
162	* the value before pen-up - that implies SPI fed us stale data
163	*/
164	if (!ts->pen_down &&
165	    ts->in_x == tsdata.x && ts->in_y == tsdata.y &&
166	    ts->in_z1 == tsdata.z1 && ts->in_z2 == tsdata.z2) {
167		goto out;
168	}
169
170	/*
171	 * At this point we are happy we have a valid and useful reading.
172	 * Remember it for later comparisons. We may now begin downsampling.
173	 */
174	ts->in_x = tsdata.x;
175	ts->in_y = tsdata.y;
176	ts->in_z1 = tsdata.z1;
177	ts->in_z2 = tsdata.z2;
178
179	/* Compute touch pressure resistance using equation #1 */
180	pressure = tsdata.x * (tsdata.z2 - tsdata.z1) / tsdata.z1;
181	pressure = pressure * ts->x_plate_ohm / 4096;
182	if (unlikely(pressure > MAX_12BIT))
183		goto out;
184
185	spin_lock_irqsave(&ts->lock, flags);
186
187	tsc200x_update_pen_state(ts, tsdata.x, tsdata.y, pressure);
188	mod_timer(&ts->penup_timer,
189		  jiffies + msecs_to_jiffies(TSC200X_PENUP_TIME_MS));
190
191	spin_unlock_irqrestore(&ts->lock, flags);
192
193	ts->last_valid_interrupt = jiffies;
194out:
195	return IRQ_HANDLED;
196}
197
198static void tsc200x_penup_timer(struct timer_list *t)
199{
200	struct tsc200x *ts = from_timer(ts, t, penup_timer);
201	unsigned long flags;
202
203	spin_lock_irqsave(&ts->lock, flags);
204	tsc200x_update_pen_state(ts, 0, 0, 0);
205	spin_unlock_irqrestore(&ts->lock, flags);
206}
207
208static void tsc200x_start_scan(struct tsc200x *ts)
209{
210	regmap_write(ts->regmap, TSC200X_REG_CFR0, TSC200X_CFR0_INITVALUE);
211	regmap_write(ts->regmap, TSC200X_REG_CFR1, TSC200X_CFR1_INITVALUE);
212	regmap_write(ts->regmap, TSC200X_REG_CFR2, TSC200X_CFR2_INITVALUE);
213	ts->tsc200x_cmd(ts->dev, TSC200X_CMD_NORMAL);
214}
215
216static void tsc200x_stop_scan(struct tsc200x *ts)
217{
218	ts->tsc200x_cmd(ts->dev, TSC200X_CMD_STOP);
219}
220
221static void tsc200x_reset(struct tsc200x *ts)
222{
223	if (ts->reset_gpio) {
224		gpiod_set_value_cansleep(ts->reset_gpio, 1);
225		usleep_range(100, 500); /* only 10us required */
226		gpiod_set_value_cansleep(ts->reset_gpio, 0);
227	}
228}
229
230/* must be called with ts->mutex held */
231static void __tsc200x_disable(struct tsc200x *ts)
232{
233	tsc200x_stop_scan(ts);
234
235	disable_irq(ts->irq);
236	del_timer_sync(&ts->penup_timer);
237
238	cancel_delayed_work_sync(&ts->esd_work);
239
240	enable_irq(ts->irq);
241}
242
243/* must be called with ts->mutex held */
244static void __tsc200x_enable(struct tsc200x *ts)
245{
246	tsc200x_start_scan(ts);
247
248	if (ts->esd_timeout && ts->reset_gpio) {
249		ts->last_valid_interrupt = jiffies;
250		schedule_delayed_work(&ts->esd_work,
251				round_jiffies_relative(
252					msecs_to_jiffies(ts->esd_timeout)));
253	}
254}
255
256static ssize_t tsc200x_selftest_show(struct device *dev,
257				     struct device_attribute *attr,
258				     char *buf)
259{
260	struct tsc200x *ts = dev_get_drvdata(dev);
261	unsigned int temp_high;
262	unsigned int temp_high_orig;
263	unsigned int temp_high_test;
264	bool success = true;
265	int error;
266
267	mutex_lock(&ts->mutex);
268
269	/*
270	 * Test TSC200X communications via temp high register.
271	 */
272	__tsc200x_disable(ts);
273
274	error = regmap_read(ts->regmap, TSC200X_REG_TEMP_HIGH, &temp_high_orig);
275	if (error) {
276		dev_warn(dev, "selftest failed: read error %d\n", error);
277		success = false;
278		goto out;
279	}
280
281	temp_high_test = (temp_high_orig - 1) & MAX_12BIT;
282
283	error = regmap_write(ts->regmap, TSC200X_REG_TEMP_HIGH, temp_high_test);
284	if (error) {
285		dev_warn(dev, "selftest failed: write error %d\n", error);
286		success = false;
287		goto out;
288	}
289
290	error = regmap_read(ts->regmap, TSC200X_REG_TEMP_HIGH, &temp_high);
291	if (error) {
292		dev_warn(dev, "selftest failed: read error %d after write\n",
293			 error);
294		success = false;
295		goto out;
296	}
297
298	if (temp_high != temp_high_test) {
299		dev_warn(dev, "selftest failed: %d != %d\n",
300			 temp_high, temp_high_test);
301		success = false;
302	}
303
304	/* hardware reset */
305	tsc200x_reset(ts);
306
307	if (!success)
308		goto out;
309
310	/* test that the reset really happened */
311	error = regmap_read(ts->regmap, TSC200X_REG_TEMP_HIGH, &temp_high);
312	if (error) {
313		dev_warn(dev, "selftest failed: read error %d after reset\n",
314			 error);
315		success = false;
316		goto out;
317	}
318
319	if (temp_high != temp_high_orig) {
320		dev_warn(dev, "selftest failed after reset: %d != %d\n",
321			 temp_high, temp_high_orig);
322		success = false;
323	}
324
325out:
326	__tsc200x_enable(ts);
327	mutex_unlock(&ts->mutex);
328
329	return sprintf(buf, "%d\n", success);
330}
331
332static DEVICE_ATTR(selftest, S_IRUGO, tsc200x_selftest_show, NULL);
333
334static struct attribute *tsc200x_attrs[] = {
335	&dev_attr_selftest.attr,
336	NULL
337};
338
339static umode_t tsc200x_attr_is_visible(struct kobject *kobj,
340				      struct attribute *attr, int n)
341{
342	struct device *dev = kobj_to_dev(kobj);
343	struct tsc200x *ts = dev_get_drvdata(dev);
344	umode_t mode = attr->mode;
345
346	if (attr == &dev_attr_selftest.attr) {
347		if (!ts->reset_gpio)
348			mode = 0;
349	}
350
351	return mode;
352}
353
354static const struct attribute_group tsc200x_attr_group = {
355	.is_visible	= tsc200x_attr_is_visible,
356	.attrs		= tsc200x_attrs,
357};
358
359const struct attribute_group *tsc200x_groups[] = {
360	&tsc200x_attr_group,
361	NULL
362};
363EXPORT_SYMBOL_GPL(tsc200x_groups);
364
365static void tsc200x_esd_work(struct work_struct *work)
366{
367	struct tsc200x *ts = container_of(work, struct tsc200x, esd_work.work);
368	int error;
369	unsigned int r;
370
371	if (!mutex_trylock(&ts->mutex)) {
372		/*
373		 * If the mutex is taken, it means that disable or enable is in
374		 * progress. In that case just reschedule the work. If the work
375		 * is not needed, it will be canceled by disable.
376		 */
377		goto reschedule;
378	}
379
380	if (time_is_after_jiffies(ts->last_valid_interrupt +
381				  msecs_to_jiffies(ts->esd_timeout)))
382		goto out;
383
384	/* We should be able to read register without disabling interrupts. */
385	error = regmap_read(ts->regmap, TSC200X_REG_CFR0, &r);
386	if (!error &&
387	    !((r ^ TSC200X_CFR0_INITVALUE) & TSC200X_CFR0_RW_MASK)) {
388		goto out;
389	}
390
391	/*
392	 * If we could not read our known value from configuration register 0
393	 * then we should reset the controller as if from power-up and start
394	 * scanning again.
395	 */
396	dev_info(ts->dev, "TSC200X not responding - resetting\n");
397
398	disable_irq(ts->irq);
399	del_timer_sync(&ts->penup_timer);
400
401	tsc200x_update_pen_state(ts, 0, 0, 0);
402
403	tsc200x_reset(ts);
404
405	enable_irq(ts->irq);
406	tsc200x_start_scan(ts);
407
408out:
409	mutex_unlock(&ts->mutex);
410reschedule:
411	/* re-arm the watchdog */
412	schedule_delayed_work(&ts->esd_work,
413			      round_jiffies_relative(
414					msecs_to_jiffies(ts->esd_timeout)));
415}
416
417static int tsc200x_open(struct input_dev *input)
418{
419	struct tsc200x *ts = input_get_drvdata(input);
420
421	mutex_lock(&ts->mutex);
422
423	if (!ts->suspended)
424		__tsc200x_enable(ts);
425
426	ts->opened = true;
427
428	mutex_unlock(&ts->mutex);
429
430	return 0;
431}
432
433static void tsc200x_close(struct input_dev *input)
434{
435	struct tsc200x *ts = input_get_drvdata(input);
436
437	mutex_lock(&ts->mutex);
438
439	if (!ts->suspended)
440		__tsc200x_disable(ts);
441
442	ts->opened = false;
443
444	mutex_unlock(&ts->mutex);
445}
446
447int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
448		  struct regmap *regmap,
449		  int (*tsc200x_cmd)(struct device *dev, u8 cmd))
450{
451	struct tsc200x *ts;
452	struct input_dev *input_dev;
453	u32 x_plate_ohm;
454	u32 esd_timeout;
455	int error;
456
457	if (irq <= 0) {
458		dev_err(dev, "no irq\n");
459		return -ENODEV;
460	}
461
462	if (IS_ERR(regmap))
463		return PTR_ERR(regmap);
464
465	if (!tsc200x_cmd) {
466		dev_err(dev, "no cmd function\n");
467		return -ENODEV;
468	}
469
470	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
471	if (!ts)
472		return -ENOMEM;
473
474	input_dev = devm_input_allocate_device(dev);
475	if (!input_dev)
476		return -ENOMEM;
477
478	ts->irq = irq;
479	ts->dev = dev;
480	ts->idev = input_dev;
481	ts->regmap = regmap;
482	ts->tsc200x_cmd = tsc200x_cmd;
483
484	error = device_property_read_u32(dev, "ti,x-plate-ohms", &x_plate_ohm);
485	ts->x_plate_ohm = error ? TSC200X_DEF_RESISTOR : x_plate_ohm;
486
487	error = device_property_read_u32(dev, "ti,esd-recovery-timeout-ms",
488					 &esd_timeout);
489	ts->esd_timeout = error ? 0 : esd_timeout;
490
491	ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
492	if (IS_ERR(ts->reset_gpio)) {
493		error = PTR_ERR(ts->reset_gpio);
494		dev_err(dev, "error acquiring reset gpio: %d\n", error);
495		return error;
496	}
497
498	ts->vio = devm_regulator_get(dev, "vio");
499	if (IS_ERR(ts->vio)) {
500		error = PTR_ERR(ts->vio);
501		dev_err(dev, "error acquiring vio regulator: %d", error);
502		return error;
503	}
504
505	mutex_init(&ts->mutex);
506
507	spin_lock_init(&ts->lock);
508	timer_setup(&ts->penup_timer, tsc200x_penup_timer, 0);
509
510	INIT_DELAYED_WORK(&ts->esd_work, tsc200x_esd_work);
511
512	snprintf(ts->phys, sizeof(ts->phys),
513		 "%s/input-ts", dev_name(dev));
514
515	if (tsc_id->product == 2004) {
516		input_dev->name = "TSC200X touchscreen";
517	} else {
518		input_dev->name = devm_kasprintf(dev, GFP_KERNEL,
519						 "TSC%04d touchscreen",
520						 tsc_id->product);
521		if (!input_dev->name)
522			return -ENOMEM;
523	}
524
525	input_dev->phys = ts->phys;
526	input_dev->id = *tsc_id;
527
528	input_dev->open = tsc200x_open;
529	input_dev->close = tsc200x_close;
530
531	input_set_drvdata(input_dev, ts);
532
533	__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
534	input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
535
536	input_set_abs_params(input_dev, ABS_X,
537			     0, MAX_12BIT, TSC200X_DEF_X_FUZZ, 0);
538	input_set_abs_params(input_dev, ABS_Y,
539			     0, MAX_12BIT, TSC200X_DEF_Y_FUZZ, 0);
540	input_set_abs_params(input_dev, ABS_PRESSURE,
541			     0, MAX_12BIT, TSC200X_DEF_P_FUZZ, 0);
542
543	touchscreen_parse_properties(input_dev, false, &ts->prop);
544
545	/* Ensure the touchscreen is off */
546	tsc200x_stop_scan(ts);
547
548	error = devm_request_threaded_irq(dev, irq, NULL,
549					  tsc200x_irq_thread,
550					  IRQF_TRIGGER_RISING | IRQF_ONESHOT,
551					  "tsc200x", ts);
552	if (error) {
553		dev_err(dev, "Failed to request irq, err: %d\n", error);
554		return error;
555	}
556
557	error = regulator_enable(ts->vio);
558	if (error)
559		return error;
560
561	dev_set_drvdata(dev, ts);
562
563	error = input_register_device(ts->idev);
564	if (error) {
565		dev_err(dev,
566			"Failed to register input device, err: %d\n", error);
567		goto disable_regulator;
568	}
569
570	irq_set_irq_wake(irq, 1);
571	return 0;
572
573disable_regulator:
574	regulator_disable(ts->vio);
575	return error;
576}
577EXPORT_SYMBOL_GPL(tsc200x_probe);
578
579void tsc200x_remove(struct device *dev)
580{
581	struct tsc200x *ts = dev_get_drvdata(dev);
582
583	regulator_disable(ts->vio);
584}
585EXPORT_SYMBOL_GPL(tsc200x_remove);
586
587static int tsc200x_suspend(struct device *dev)
588{
589	struct tsc200x *ts = dev_get_drvdata(dev);
590
591	mutex_lock(&ts->mutex);
592
593	if (!ts->suspended && ts->opened)
594		__tsc200x_disable(ts);
595
596	ts->suspended = true;
597
598	mutex_unlock(&ts->mutex);
599
600	return 0;
601}
602
603static int tsc200x_resume(struct device *dev)
604{
605	struct tsc200x *ts = dev_get_drvdata(dev);
606
607	mutex_lock(&ts->mutex);
608
609	if (ts->suspended && ts->opened)
610		__tsc200x_enable(ts);
611
612	ts->suspended = false;
613
614	mutex_unlock(&ts->mutex);
615
616	return 0;
617}
618
619EXPORT_GPL_SIMPLE_DEV_PM_OPS(tsc200x_pm_ops, tsc200x_suspend, tsc200x_resume);
620
621MODULE_AUTHOR("Lauri Leukkunen <lauri.leukkunen@nokia.com>");
622MODULE_DESCRIPTION("TSC200x Touchscreen Driver Core");
623MODULE_LICENSE("GPL");
624