1// SPDX-License-Identifier: GPL-2.0-only 2#include <linux/crc-ccitt.h> 3#include <linux/delay.h> 4#include <linux/gpio/consumer.h> 5#include <linux/i2c.h> 6#include <linux/ihex.h> 7#include <linux/input.h> 8#include <linux/input/mt.h> 9#include <linux/input/touchscreen.h> 10#include <linux/interrupt.h> 11#include <linux/mod_devicetable.h> 12#include <linux/module.h> 13#include <linux/sizes.h> 14#include <linux/slab.h> 15#include <asm/unaligned.h> 16 17#define ILI2XXX_POLL_PERIOD 15 18 19#define ILI210X_DATA_SIZE 64 20#define ILI211X_DATA_SIZE 43 21#define ILI251X_DATA_SIZE1 31 22#define ILI251X_DATA_SIZE2 20 23 24/* Touchscreen commands */ 25#define REG_TOUCHDATA 0x10 26#define REG_PANEL_INFO 0x20 27#define REG_FIRMWARE_VERSION 0x40 28#define REG_PROTOCOL_VERSION 0x42 29#define REG_KERNEL_VERSION 0x61 30#define REG_IC_BUSY 0x80 31#define REG_IC_BUSY_NOT_BUSY 0x50 32#define REG_GET_MODE 0xc0 33#define REG_GET_MODE_AP 0x5a 34#define REG_GET_MODE_BL 0x55 35#define REG_SET_MODE_AP 0xc1 36#define REG_SET_MODE_BL 0xc2 37#define REG_WRITE_DATA 0xc3 38#define REG_WRITE_ENABLE 0xc4 39#define REG_READ_DATA_CRC 0xc7 40#define REG_CALIBRATE 0xcc 41 42#define ILI251X_FW_FILENAME "ilitek/ili251x.bin" 43 44struct ili2xxx_chip { 45 int (*read_reg)(struct i2c_client *client, u8 reg, 46 void *buf, size_t len); 47 int (*get_touch_data)(struct i2c_client *client, u8 *data); 48 bool (*parse_touch_data)(const u8 *data, unsigned int finger, 49 unsigned int *x, unsigned int *y, 50 unsigned int *z); 51 bool (*continue_polling)(const u8 *data, bool touch); 52 unsigned int max_touches; 53 unsigned int resolution; 54 bool has_calibrate_reg; 55 bool has_firmware_proto; 56 bool has_pressure_reg; 57}; 58 59struct ili210x { 60 struct i2c_client *client; 61 struct input_dev *input; 62 struct gpio_desc *reset_gpio; 63 struct touchscreen_properties prop; 64 const struct ili2xxx_chip *chip; 65 u8 version_firmware[8]; 66 u8 version_kernel[5]; 67 u8 version_proto[2]; 68 u8 ic_mode[2]; 69 bool stop; 70}; 71 72static int ili210x_read_reg(struct i2c_client *client, 73 u8 reg, void *buf, size_t len) 74{ 75 struct i2c_msg msg[] = { 76 { 77 .addr = client->addr, 78 .flags = 0, 79 .len = 1, 80 .buf = ®, 81 }, 82 { 83 .addr = client->addr, 84 .flags = I2C_M_RD, 85 .len = len, 86 .buf = buf, 87 } 88 }; 89 int error, ret; 90 91 ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); 92 if (ret != ARRAY_SIZE(msg)) { 93 error = ret < 0 ? ret : -EIO; 94 dev_err(&client->dev, "%s failed: %d\n", __func__, error); 95 return error; 96 } 97 98 return 0; 99} 100 101static int ili210x_read_touch_data(struct i2c_client *client, u8 *data) 102{ 103 return ili210x_read_reg(client, REG_TOUCHDATA, 104 data, ILI210X_DATA_SIZE); 105} 106 107static bool ili210x_touchdata_to_coords(const u8 *touchdata, 108 unsigned int finger, 109 unsigned int *x, unsigned int *y, 110 unsigned int *z) 111{ 112 if (!(touchdata[0] & BIT(finger))) 113 return false; 114 115 *x = get_unaligned_be16(touchdata + 1 + (finger * 4) + 0); 116 *y = get_unaligned_be16(touchdata + 1 + (finger * 4) + 2); 117 118 return true; 119} 120 121static bool ili210x_check_continue_polling(const u8 *data, bool touch) 122{ 123 return data[0] & 0xf3; 124} 125 126static const struct ili2xxx_chip ili210x_chip = { 127 .read_reg = ili210x_read_reg, 128 .get_touch_data = ili210x_read_touch_data, 129 .parse_touch_data = ili210x_touchdata_to_coords, 130 .continue_polling = ili210x_check_continue_polling, 131 .max_touches = 2, 132 .has_calibrate_reg = true, 133}; 134 135static int ili211x_read_touch_data(struct i2c_client *client, u8 *data) 136{ 137 s16 sum = 0; 138 int error; 139 int ret; 140 int i; 141 142 ret = i2c_master_recv(client, data, ILI211X_DATA_SIZE); 143 if (ret != ILI211X_DATA_SIZE) { 144 error = ret < 0 ? ret : -EIO; 145 dev_err(&client->dev, "%s failed: %d\n", __func__, error); 146 return error; 147 } 148 149 /* This chip uses custom checksum at the end of data */ 150 for (i = 0; i < ILI211X_DATA_SIZE - 1; i++) 151 sum = (sum + data[i]) & 0xff; 152 153 if ((-sum & 0xff) != data[ILI211X_DATA_SIZE - 1]) { 154 dev_err(&client->dev, 155 "CRC error (crc=0x%02x expected=0x%02x)\n", 156 sum, data[ILI211X_DATA_SIZE - 1]); 157 return -EIO; 158 } 159 160 return 0; 161} 162 163static bool ili211x_touchdata_to_coords(const u8 *touchdata, 164 unsigned int finger, 165 unsigned int *x, unsigned int *y, 166 unsigned int *z) 167{ 168 u32 data; 169 170 data = get_unaligned_be32(touchdata + 1 + (finger * 4) + 0); 171 if (data == 0xffffffff) /* Finger up */ 172 return false; 173 174 *x = ((touchdata[1 + (finger * 4) + 0] & 0xf0) << 4) | 175 touchdata[1 + (finger * 4) + 1]; 176 *y = ((touchdata[1 + (finger * 4) + 0] & 0x0f) << 8) | 177 touchdata[1 + (finger * 4) + 2]; 178 179 return true; 180} 181 182static bool ili211x_decline_polling(const u8 *data, bool touch) 183{ 184 return false; 185} 186 187static const struct ili2xxx_chip ili211x_chip = { 188 .read_reg = ili210x_read_reg, 189 .get_touch_data = ili211x_read_touch_data, 190 .parse_touch_data = ili211x_touchdata_to_coords, 191 .continue_polling = ili211x_decline_polling, 192 .max_touches = 10, 193 .resolution = 2048, 194}; 195 196static bool ili212x_touchdata_to_coords(const u8 *touchdata, 197 unsigned int finger, 198 unsigned int *x, unsigned int *y, 199 unsigned int *z) 200{ 201 u16 val; 202 203 val = get_unaligned_be16(touchdata + 3 + (finger * 5) + 0); 204 if (!(val & BIT(15))) /* Touch indication */ 205 return false; 206 207 *x = val & 0x3fff; 208 *y = get_unaligned_be16(touchdata + 3 + (finger * 5) + 2); 209 210 return true; 211} 212 213static bool ili212x_check_continue_polling(const u8 *data, bool touch) 214{ 215 return touch; 216} 217 218static const struct ili2xxx_chip ili212x_chip = { 219 .read_reg = ili210x_read_reg, 220 .get_touch_data = ili210x_read_touch_data, 221 .parse_touch_data = ili212x_touchdata_to_coords, 222 .continue_polling = ili212x_check_continue_polling, 223 .max_touches = 10, 224 .has_calibrate_reg = true, 225}; 226 227static int ili251x_read_reg_common(struct i2c_client *client, 228 u8 reg, void *buf, size_t len, 229 unsigned int delay) 230{ 231 int error; 232 int ret; 233 234 ret = i2c_master_send(client, ®, 1); 235 if (ret == 1) { 236 if (delay) 237 usleep_range(delay, delay + 500); 238 239 ret = i2c_master_recv(client, buf, len); 240 if (ret == len) 241 return 0; 242 } 243 244 error = ret < 0 ? ret : -EIO; 245 dev_err(&client->dev, "%s failed: %d\n", __func__, error); 246 return ret; 247} 248 249static int ili251x_read_reg(struct i2c_client *client, 250 u8 reg, void *buf, size_t len) 251{ 252 return ili251x_read_reg_common(client, reg, buf, len, 5000); 253} 254 255static int ili251x_read_touch_data(struct i2c_client *client, u8 *data) 256{ 257 int error; 258 259 error = ili251x_read_reg_common(client, REG_TOUCHDATA, 260 data, ILI251X_DATA_SIZE1, 0); 261 if (!error && data[0] == 2) { 262 error = i2c_master_recv(client, data + ILI251X_DATA_SIZE1, 263 ILI251X_DATA_SIZE2); 264 if (error >= 0 && error != ILI251X_DATA_SIZE2) 265 error = -EIO; 266 } 267 268 return error; 269} 270 271static bool ili251x_touchdata_to_coords(const u8 *touchdata, 272 unsigned int finger, 273 unsigned int *x, unsigned int *y, 274 unsigned int *z) 275{ 276 u16 val; 277 278 val = get_unaligned_be16(touchdata + 1 + (finger * 5) + 0); 279 if (!(val & BIT(15))) /* Touch indication */ 280 return false; 281 282 *x = val & 0x3fff; 283 *y = get_unaligned_be16(touchdata + 1 + (finger * 5) + 2); 284 *z = touchdata[1 + (finger * 5) + 4]; 285 286 return true; 287} 288 289static bool ili251x_check_continue_polling(const u8 *data, bool touch) 290{ 291 return touch; 292} 293 294static const struct ili2xxx_chip ili251x_chip = { 295 .read_reg = ili251x_read_reg, 296 .get_touch_data = ili251x_read_touch_data, 297 .parse_touch_data = ili251x_touchdata_to_coords, 298 .continue_polling = ili251x_check_continue_polling, 299 .max_touches = 10, 300 .has_calibrate_reg = true, 301 .has_firmware_proto = true, 302 .has_pressure_reg = true, 303}; 304 305static bool ili210x_report_events(struct ili210x *priv, u8 *touchdata) 306{ 307 struct input_dev *input = priv->input; 308 int i; 309 bool contact = false, touch; 310 unsigned int x = 0, y = 0, z = 0; 311 312 for (i = 0; i < priv->chip->max_touches; i++) { 313 touch = priv->chip->parse_touch_data(touchdata, i, &x, &y, &z); 314 315 input_mt_slot(input, i); 316 if (input_mt_report_slot_state(input, MT_TOOL_FINGER, touch)) { 317 touchscreen_report_pos(input, &priv->prop, x, y, true); 318 if (priv->chip->has_pressure_reg) 319 input_report_abs(input, ABS_MT_PRESSURE, z); 320 contact = true; 321 } 322 } 323 324 input_mt_report_pointer_emulation(input, false); 325 input_sync(input); 326 327 return contact; 328} 329 330static irqreturn_t ili210x_irq(int irq, void *irq_data) 331{ 332 struct ili210x *priv = irq_data; 333 struct i2c_client *client = priv->client; 334 const struct ili2xxx_chip *chip = priv->chip; 335 u8 touchdata[ILI210X_DATA_SIZE] = { 0 }; 336 bool keep_polling; 337 ktime_t time_next; 338 s64 time_delta; 339 bool touch; 340 int error; 341 342 do { 343 time_next = ktime_add_ms(ktime_get(), ILI2XXX_POLL_PERIOD); 344 error = chip->get_touch_data(client, touchdata); 345 if (error) { 346 dev_err(&client->dev, 347 "Unable to get touch data: %d\n", error); 348 break; 349 } 350 351 touch = ili210x_report_events(priv, touchdata); 352 keep_polling = chip->continue_polling(touchdata, touch); 353 if (keep_polling) { 354 time_delta = ktime_us_delta(time_next, ktime_get()); 355 if (time_delta > 0) 356 usleep_range(time_delta, time_delta + 1000); 357 } 358 } while (!priv->stop && keep_polling); 359 360 return IRQ_HANDLED; 361} 362 363static int ili251x_firmware_update_resolution(struct device *dev) 364{ 365 struct i2c_client *client = to_i2c_client(dev); 366 struct ili210x *priv = i2c_get_clientdata(client); 367 u16 resx, resy; 368 u8 rs[10]; 369 int error; 370 371 /* The firmware update blob might have changed the resolution. */ 372 error = priv->chip->read_reg(client, REG_PANEL_INFO, &rs, sizeof(rs)); 373 if (!error) { 374 resx = le16_to_cpup((__le16 *)rs); 375 resy = le16_to_cpup((__le16 *)(rs + 2)); 376 377 /* The value reported by the firmware is invalid. */ 378 if (!resx || resx == 0xffff || !resy || resy == 0xffff) 379 error = -EINVAL; 380 } 381 382 /* 383 * In case of error, the firmware might be stuck in bootloader mode, 384 * e.g. after a failed firmware update. Set maximum resolution, but 385 * do not fail to probe, so the user can re-trigger the firmware 386 * update and recover the touch controller. 387 */ 388 if (error) { 389 dev_warn(dev, "Invalid resolution reported by controller.\n"); 390 resx = 16384; 391 resy = 16384; 392 } 393 394 input_abs_set_max(priv->input, ABS_X, resx - 1); 395 input_abs_set_max(priv->input, ABS_Y, resy - 1); 396 input_abs_set_max(priv->input, ABS_MT_POSITION_X, resx - 1); 397 input_abs_set_max(priv->input, ABS_MT_POSITION_Y, resy - 1); 398 399 return error; 400} 401 402static ssize_t ili251x_firmware_update_firmware_version(struct device *dev) 403{ 404 struct i2c_client *client = to_i2c_client(dev); 405 struct ili210x *priv = i2c_get_clientdata(client); 406 int error; 407 u8 fw[8]; 408 409 /* Get firmware version */ 410 error = priv->chip->read_reg(client, REG_FIRMWARE_VERSION, 411 &fw, sizeof(fw)); 412 if (!error) 413 memcpy(priv->version_firmware, fw, sizeof(fw)); 414 415 return error; 416} 417 418static ssize_t ili251x_firmware_update_kernel_version(struct device *dev) 419{ 420 struct i2c_client *client = to_i2c_client(dev); 421 struct ili210x *priv = i2c_get_clientdata(client); 422 int error; 423 u8 kv[5]; 424 425 /* Get kernel version */ 426 error = priv->chip->read_reg(client, REG_KERNEL_VERSION, 427 &kv, sizeof(kv)); 428 if (!error) 429 memcpy(priv->version_kernel, kv, sizeof(kv)); 430 431 return error; 432} 433 434static ssize_t ili251x_firmware_update_protocol_version(struct device *dev) 435{ 436 struct i2c_client *client = to_i2c_client(dev); 437 struct ili210x *priv = i2c_get_clientdata(client); 438 int error; 439 u8 pv[2]; 440 441 /* Get protocol version */ 442 error = priv->chip->read_reg(client, REG_PROTOCOL_VERSION, 443 &pv, sizeof(pv)); 444 if (!error) 445 memcpy(priv->version_proto, pv, sizeof(pv)); 446 447 return error; 448} 449 450static ssize_t ili251x_firmware_update_ic_mode(struct device *dev) 451{ 452 struct i2c_client *client = to_i2c_client(dev); 453 struct ili210x *priv = i2c_get_clientdata(client); 454 int error; 455 u8 md[2]; 456 457 /* Get chip boot mode */ 458 error = priv->chip->read_reg(client, REG_GET_MODE, &md, sizeof(md)); 459 if (!error) 460 memcpy(priv->ic_mode, md, sizeof(md)); 461 462 return error; 463} 464 465static int ili251x_firmware_update_cached_state(struct device *dev) 466{ 467 struct i2c_client *client = to_i2c_client(dev); 468 struct ili210x *priv = i2c_get_clientdata(client); 469 int error; 470 471 if (!priv->chip->has_firmware_proto) 472 return 0; 473 474 /* Wait for firmware to boot and stabilize itself. */ 475 msleep(200); 476 477 /* Firmware does report valid information. */ 478 error = ili251x_firmware_update_resolution(dev); 479 if (error) 480 return error; 481 482 error = ili251x_firmware_update_firmware_version(dev); 483 if (error) 484 return error; 485 486 error = ili251x_firmware_update_kernel_version(dev); 487 if (error) 488 return error; 489 490 error = ili251x_firmware_update_protocol_version(dev); 491 if (error) 492 return error; 493 494 error = ili251x_firmware_update_ic_mode(dev); 495 if (error) 496 return error; 497 498 return 0; 499} 500 501static ssize_t ili251x_firmware_version_show(struct device *dev, 502 struct device_attribute *attr, 503 char *buf) 504{ 505 struct i2c_client *client = to_i2c_client(dev); 506 struct ili210x *priv = i2c_get_clientdata(client); 507 u8 *fw = priv->version_firmware; 508 509 return sysfs_emit(buf, "%02x%02x.%02x%02x.%02x%02x.%02x%02x\n", 510 fw[0], fw[1], fw[2], fw[3], 511 fw[4], fw[5], fw[6], fw[7]); 512} 513static DEVICE_ATTR(firmware_version, 0444, ili251x_firmware_version_show, NULL); 514 515static ssize_t ili251x_kernel_version_show(struct device *dev, 516 struct device_attribute *attr, 517 char *buf) 518{ 519 struct i2c_client *client = to_i2c_client(dev); 520 struct ili210x *priv = i2c_get_clientdata(client); 521 u8 *kv = priv->version_kernel; 522 523 return sysfs_emit(buf, "%02x.%02x.%02x.%02x.%02x\n", 524 kv[0], kv[1], kv[2], kv[3], kv[4]); 525} 526static DEVICE_ATTR(kernel_version, 0444, ili251x_kernel_version_show, NULL); 527 528static ssize_t ili251x_protocol_version_show(struct device *dev, 529 struct device_attribute *attr, 530 char *buf) 531{ 532 struct i2c_client *client = to_i2c_client(dev); 533 struct ili210x *priv = i2c_get_clientdata(client); 534 u8 *pv = priv->version_proto; 535 536 return sysfs_emit(buf, "%02x.%02x\n", pv[0], pv[1]); 537} 538static DEVICE_ATTR(protocol_version, 0444, ili251x_protocol_version_show, NULL); 539 540static ssize_t ili251x_mode_show(struct device *dev, 541 struct device_attribute *attr, char *buf) 542{ 543 struct i2c_client *client = to_i2c_client(dev); 544 struct ili210x *priv = i2c_get_clientdata(client); 545 u8 *md = priv->ic_mode; 546 char *mode = "AP"; 547 548 if (md[0] == REG_GET_MODE_AP) /* Application Mode */ 549 mode = "AP"; 550 else if (md[0] == REG_GET_MODE_BL) /* BootLoader Mode */ 551 mode = "BL"; 552 else /* Unknown Mode */ 553 mode = "??"; 554 555 return sysfs_emit(buf, "%02x.%02x:%s\n", md[0], md[1], mode); 556} 557static DEVICE_ATTR(mode, 0444, ili251x_mode_show, NULL); 558 559static ssize_t ili210x_calibrate(struct device *dev, 560 struct device_attribute *attr, 561 const char *buf, size_t count) 562{ 563 struct i2c_client *client = to_i2c_client(dev); 564 struct ili210x *priv = i2c_get_clientdata(client); 565 unsigned long calibrate; 566 int rc; 567 u8 cmd = REG_CALIBRATE; 568 569 if (kstrtoul(buf, 10, &calibrate)) 570 return -EINVAL; 571 572 if (calibrate > 1) 573 return -EINVAL; 574 575 if (calibrate) { 576 rc = i2c_master_send(priv->client, &cmd, sizeof(cmd)); 577 if (rc != sizeof(cmd)) 578 return -EIO; 579 } 580 581 return count; 582} 583static DEVICE_ATTR(calibrate, S_IWUSR, NULL, ili210x_calibrate); 584 585static int ili251x_firmware_to_buffer(const struct firmware *fw, 586 u8 **buf, u16 *ac_end, u16 *df_end) 587{ 588 const struct ihex_binrec *rec; 589 u32 fw_addr, fw_last_addr = 0; 590 u16 fw_len; 591 u8 *fw_buf; 592 int error; 593 594 /* 595 * The firmware ihex blob can never be bigger than 64 kiB, so make this 596 * simple -- allocate a 64 kiB buffer, iterate over the ihex blob records 597 * once, copy them all into this buffer at the right locations, and then 598 * do all operations on this linear buffer. 599 */ 600 fw_buf = kzalloc(SZ_64K, GFP_KERNEL); 601 if (!fw_buf) 602 return -ENOMEM; 603 604 rec = (const struct ihex_binrec *)fw->data; 605 while (rec) { 606 fw_addr = be32_to_cpu(rec->addr); 607 fw_len = be16_to_cpu(rec->len); 608 609 /* The last 32 Byte firmware block can be 0xffe0 */ 610 if (fw_addr + fw_len > SZ_64K || fw_addr > SZ_64K - 32) { 611 error = -EFBIG; 612 goto err_big; 613 } 614 615 /* Find the last address before DF start address, that is AC end */ 616 if (fw_addr == 0xf000) 617 *ac_end = fw_last_addr; 618 fw_last_addr = fw_addr + fw_len; 619 620 memcpy(fw_buf + fw_addr, rec->data, fw_len); 621 rec = ihex_next_binrec(rec); 622 } 623 624 /* DF end address is the last address in the firmware blob */ 625 *df_end = fw_addr + fw_len; 626 *buf = fw_buf; 627 return 0; 628 629err_big: 630 kfree(fw_buf); 631 return error; 632} 633 634/* Switch mode between Application and BootLoader */ 635static int ili251x_switch_ic_mode(struct i2c_client *client, u8 cmd_mode) 636{ 637 struct ili210x *priv = i2c_get_clientdata(client); 638 u8 cmd_wren[3] = { REG_WRITE_ENABLE, 0x5a, 0xa5 }; 639 u8 md[2]; 640 int error; 641 642 error = priv->chip->read_reg(client, REG_GET_MODE, md, sizeof(md)); 643 if (error) 644 return error; 645 /* Mode already set */ 646 if ((cmd_mode == REG_SET_MODE_AP && md[0] == REG_GET_MODE_AP) || 647 (cmd_mode == REG_SET_MODE_BL && md[0] == REG_GET_MODE_BL)) 648 return 0; 649 650 /* Unlock writes */ 651 error = i2c_master_send(client, cmd_wren, sizeof(cmd_wren)); 652 if (error != sizeof(cmd_wren)) 653 return -EINVAL; 654 655 mdelay(20); 656 657 /* Select mode (BootLoader or Application) */ 658 error = i2c_master_send(client, &cmd_mode, 1); 659 if (error != 1) 660 return -EINVAL; 661 662 mdelay(200); /* Reboot into bootloader takes a lot of time ... */ 663 664 /* Read back mode */ 665 error = priv->chip->read_reg(client, REG_GET_MODE, md, sizeof(md)); 666 if (error) 667 return error; 668 /* Check if mode is correct now. */ 669 if ((cmd_mode == REG_SET_MODE_AP && md[0] == REG_GET_MODE_AP) || 670 (cmd_mode == REG_SET_MODE_BL && md[0] == REG_GET_MODE_BL)) 671 return 0; 672 673 return -EINVAL; 674} 675 676static int ili251x_firmware_busy(struct i2c_client *client) 677{ 678 struct ili210x *priv = i2c_get_clientdata(client); 679 int error, i = 0; 680 u8 data; 681 682 do { 683 /* The read_reg already contains suitable delay */ 684 error = priv->chip->read_reg(client, REG_IC_BUSY, &data, 1); 685 if (error) 686 return error; 687 if (i++ == 100000) 688 return -ETIMEDOUT; 689 } while (data != REG_IC_BUSY_NOT_BUSY); 690 691 return 0; 692} 693 694static int ili251x_firmware_write_to_ic(struct device *dev, u8 *fwbuf, 695 u16 start, u16 end, u8 dataflash) 696{ 697 struct i2c_client *client = to_i2c_client(dev); 698 struct ili210x *priv = i2c_get_clientdata(client); 699 u8 cmd_crc = REG_READ_DATA_CRC; 700 u8 crcrb[4] = { 0 }; 701 u8 fw_data[33]; 702 u16 fw_addr; 703 int error; 704 705 /* 706 * The DF (dataflash) needs 2 bytes offset for unknown reasons, 707 * the AC (application) has 2 bytes CRC16-CCITT at the end. 708 */ 709 u16 crc = crc_ccitt(0, fwbuf + start + (dataflash ? 2 : 0), 710 end - start - 2); 711 712 /* Unlock write to either AC (application) or DF (dataflash) area */ 713 u8 cmd_wr[10] = { 714 REG_WRITE_ENABLE, 0x5a, 0xa5, dataflash, 715 (end >> 16) & 0xff, (end >> 8) & 0xff, end & 0xff, 716 (crc >> 16) & 0xff, (crc >> 8) & 0xff, crc & 0xff 717 }; 718 719 error = i2c_master_send(client, cmd_wr, sizeof(cmd_wr)); 720 if (error != sizeof(cmd_wr)) 721 return -EINVAL; 722 723 error = ili251x_firmware_busy(client); 724 if (error) 725 return error; 726 727 for (fw_addr = start; fw_addr < end; fw_addr += 32) { 728 fw_data[0] = REG_WRITE_DATA; 729 memcpy(&(fw_data[1]), fwbuf + fw_addr, 32); 730 error = i2c_master_send(client, fw_data, 33); 731 if (error != sizeof(fw_data)) 732 return error; 733 error = ili251x_firmware_busy(client); 734 if (error) 735 return error; 736 } 737 738 error = i2c_master_send(client, &cmd_crc, 1); 739 if (error != 1) 740 return -EINVAL; 741 742 error = ili251x_firmware_busy(client); 743 if (error) 744 return error; 745 746 error = priv->chip->read_reg(client, REG_READ_DATA_CRC, 747 &crcrb, sizeof(crcrb)); 748 if (error) 749 return error; 750 751 /* Check CRC readback */ 752 if ((crcrb[0] != (crc & 0xff)) || crcrb[1] != ((crc >> 8) & 0xff)) 753 return -EINVAL; 754 755 return 0; 756} 757 758static int ili251x_firmware_reset(struct i2c_client *client) 759{ 760 u8 cmd_reset[2] = { 0xf2, 0x01 }; 761 int error; 762 763 error = i2c_master_send(client, cmd_reset, sizeof(cmd_reset)); 764 if (error != sizeof(cmd_reset)) 765 return -EINVAL; 766 767 return ili251x_firmware_busy(client); 768} 769 770static void ili210x_hardware_reset(struct gpio_desc *reset_gpio) 771{ 772 /* Reset the controller */ 773 gpiod_set_value_cansleep(reset_gpio, 1); 774 usleep_range(12000, 15000); 775 gpiod_set_value_cansleep(reset_gpio, 0); 776 msleep(300); 777} 778 779static ssize_t ili210x_firmware_update_store(struct device *dev, 780 struct device_attribute *attr, 781 const char *buf, size_t count) 782{ 783 struct i2c_client *client = to_i2c_client(dev); 784 struct ili210x *priv = i2c_get_clientdata(client); 785 const char *fwname = ILI251X_FW_FILENAME; 786 const struct firmware *fw; 787 u16 ac_end, df_end; 788 u8 *fwbuf; 789 int error; 790 int i; 791 792 error = request_ihex_firmware(&fw, fwname, dev); 793 if (error) { 794 dev_err(dev, "Failed to request firmware %s, error=%d\n", 795 fwname, error); 796 return error; 797 } 798 799 error = ili251x_firmware_to_buffer(fw, &fwbuf, &ac_end, &df_end); 800 release_firmware(fw); 801 if (error) 802 return error; 803 804 /* 805 * Disable touchscreen IRQ, so that we would not get spurious touch 806 * interrupt during firmware update, and so that the IRQ handler won't 807 * trigger and interfere with the firmware update. There is no bit in 808 * the touch controller to disable the IRQs during update, so we have 809 * to do it this way here. 810 */ 811 disable_irq(client->irq); 812 813 dev_dbg(dev, "Firmware update started, firmware=%s\n", fwname); 814 815 ili210x_hardware_reset(priv->reset_gpio); 816 817 error = ili251x_firmware_reset(client); 818 if (error) 819 goto exit; 820 821 /* This may not succeed on first try, so re-try a few times. */ 822 for (i = 0; i < 5; i++) { 823 error = ili251x_switch_ic_mode(client, REG_SET_MODE_BL); 824 if (!error) 825 break; 826 } 827 828 if (error) 829 goto exit; 830 831 dev_dbg(dev, "IC is now in BootLoader mode\n"); 832 833 msleep(200); /* The bootloader seems to need some time too. */ 834 835 error = ili251x_firmware_write_to_ic(dev, fwbuf, 0xf000, df_end, 1); 836 if (error) { 837 dev_err(dev, "DF firmware update failed, error=%d\n", error); 838 goto exit; 839 } 840 841 dev_dbg(dev, "DataFlash firmware written\n"); 842 843 error = ili251x_firmware_write_to_ic(dev, fwbuf, 0x2000, ac_end, 0); 844 if (error) { 845 dev_err(dev, "AC firmware update failed, error=%d\n", error); 846 goto exit; 847 } 848 849 dev_dbg(dev, "Application firmware written\n"); 850 851 /* This may not succeed on first try, so re-try a few times. */ 852 for (i = 0; i < 5; i++) { 853 error = ili251x_switch_ic_mode(client, REG_SET_MODE_AP); 854 if (!error) 855 break; 856 } 857 858 if (error) 859 goto exit; 860 861 dev_dbg(dev, "IC is now in Application mode\n"); 862 863 error = ili251x_firmware_update_cached_state(dev); 864 if (error) 865 goto exit; 866 867 error = count; 868 869exit: 870 ili210x_hardware_reset(priv->reset_gpio); 871 dev_dbg(dev, "Firmware update ended, error=%i\n", error); 872 enable_irq(client->irq); 873 kfree(fwbuf); 874 return error; 875} 876 877static DEVICE_ATTR(firmware_update, 0200, NULL, ili210x_firmware_update_store); 878 879static struct attribute *ili210x_attrs[] = { 880 &dev_attr_calibrate.attr, 881 &dev_attr_firmware_update.attr, 882 &dev_attr_firmware_version.attr, 883 &dev_attr_kernel_version.attr, 884 &dev_attr_protocol_version.attr, 885 &dev_attr_mode.attr, 886 NULL, 887}; 888 889static umode_t ili210x_attributes_visible(struct kobject *kobj, 890 struct attribute *attr, int index) 891{ 892 struct device *dev = kobj_to_dev(kobj); 893 struct i2c_client *client = to_i2c_client(dev); 894 struct ili210x *priv = i2c_get_clientdata(client); 895 896 /* Calibrate is present on all ILI2xxx which have calibrate register */ 897 if (attr == &dev_attr_calibrate.attr) 898 return priv->chip->has_calibrate_reg ? attr->mode : 0; 899 900 /* Firmware/Kernel/Protocol/BootMode is implememted only for ILI251x */ 901 if (!priv->chip->has_firmware_proto) 902 return 0; 903 904 return attr->mode; 905} 906 907static const struct attribute_group ili210x_group = { 908 .attrs = ili210x_attrs, 909 .is_visible = ili210x_attributes_visible, 910}; 911__ATTRIBUTE_GROUPS(ili210x); 912 913static void ili210x_power_down(void *data) 914{ 915 struct gpio_desc *reset_gpio = data; 916 917 gpiod_set_value_cansleep(reset_gpio, 1); 918} 919 920static void ili210x_stop(void *data) 921{ 922 struct ili210x *priv = data; 923 924 /* Tell ISR to quit even if there is a contact. */ 925 priv->stop = true; 926} 927 928static int ili210x_i2c_probe(struct i2c_client *client) 929{ 930 const struct i2c_device_id *id = i2c_client_get_device_id(client); 931 struct device *dev = &client->dev; 932 const struct ili2xxx_chip *chip; 933 struct ili210x *priv; 934 struct gpio_desc *reset_gpio; 935 struct input_dev *input; 936 int error; 937 unsigned int max_xy; 938 939 dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver"); 940 941 chip = device_get_match_data(dev); 942 if (!chip && id) 943 chip = (const struct ili2xxx_chip *)id->driver_data; 944 if (!chip) { 945 dev_err(&client->dev, "unknown device model\n"); 946 return -ENODEV; 947 } 948 949 if (client->irq <= 0) { 950 dev_err(dev, "No IRQ!\n"); 951 return -EINVAL; 952 } 953 954 reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); 955 if (IS_ERR(reset_gpio)) 956 return PTR_ERR(reset_gpio); 957 958 if (reset_gpio) { 959 error = devm_add_action_or_reset(dev, ili210x_power_down, 960 reset_gpio); 961 if (error) 962 return error; 963 964 ili210x_hardware_reset(reset_gpio); 965 } 966 967 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 968 if (!priv) 969 return -ENOMEM; 970 971 input = devm_input_allocate_device(dev); 972 if (!input) 973 return -ENOMEM; 974 975 priv->client = client; 976 priv->input = input; 977 priv->reset_gpio = reset_gpio; 978 priv->chip = chip; 979 i2c_set_clientdata(client, priv); 980 981 /* Setup input device */ 982 input->name = "ILI210x Touchscreen"; 983 input->id.bustype = BUS_I2C; 984 985 /* Multi touch */ 986 max_xy = (chip->resolution ?: SZ_64K) - 1; 987 input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_xy, 0, 0); 988 input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_xy, 0, 0); 989 if (priv->chip->has_pressure_reg) 990 input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xa, 0, 0); 991 error = ili251x_firmware_update_cached_state(dev); 992 if (error) 993 dev_warn(dev, "Unable to cache firmware information, err: %d\n", 994 error); 995 996 touchscreen_parse_properties(input, true, &priv->prop); 997 998 error = input_mt_init_slots(input, priv->chip->max_touches, 999 INPUT_MT_DIRECT); 1000 if (error) { 1001 dev_err(dev, "Unable to set up slots, err: %d\n", error); 1002 return error; 1003 } 1004 1005 error = devm_request_threaded_irq(dev, client->irq, NULL, ili210x_irq, 1006 IRQF_ONESHOT, client->name, priv); 1007 if (error) { 1008 dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n", 1009 error); 1010 return error; 1011 } 1012 1013 error = devm_add_action_or_reset(dev, ili210x_stop, priv); 1014 if (error) 1015 return error; 1016 1017 error = input_register_device(priv->input); 1018 if (error) { 1019 dev_err(dev, "Cannot register input device, err: %d\n", error); 1020 return error; 1021 } 1022 1023 return 0; 1024} 1025 1026static const struct i2c_device_id ili210x_i2c_id[] = { 1027 { "ili210x", (long)&ili210x_chip }, 1028 { "ili2117", (long)&ili211x_chip }, 1029 { "ili2120", (long)&ili212x_chip }, 1030 { "ili251x", (long)&ili251x_chip }, 1031 { } 1032}; 1033MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id); 1034 1035static const struct of_device_id ili210x_dt_ids[] = { 1036 { .compatible = "ilitek,ili210x", .data = &ili210x_chip }, 1037 { .compatible = "ilitek,ili2117", .data = &ili211x_chip }, 1038 { .compatible = "ilitek,ili2120", .data = &ili212x_chip }, 1039 { .compatible = "ilitek,ili251x", .data = &ili251x_chip }, 1040 { } 1041}; 1042MODULE_DEVICE_TABLE(of, ili210x_dt_ids); 1043 1044static struct i2c_driver ili210x_ts_driver = { 1045 .driver = { 1046 .name = "ili210x_i2c", 1047 .dev_groups = ili210x_groups, 1048 .of_match_table = ili210x_dt_ids, 1049 }, 1050 .id_table = ili210x_i2c_id, 1051 .probe = ili210x_i2c_probe, 1052}; 1053 1054module_i2c_driver(ili210x_ts_driver); 1055 1056MODULE_AUTHOR("Olivier Sobrie <olivier@sobrie.be>"); 1057MODULE_DESCRIPTION("ILI210X I2C Touchscreen Driver"); 1058MODULE_LICENSE("GPL"); 1059