1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (c) 2015, The Linux Foundation. All rights reserved. 4 */ 5 6#include <linux/clk.h> 7#include <linux/clk-provider.h> 8 9#include "dsi_phy.h" 10#include "dsi.xml.h" 11#include "dsi_phy_28nm.xml.h" 12 13/* 14 * DSI PLL 28nm - clock diagram (eg: DSI0): 15 * 16 * dsi0analog_postdiv_clk 17 * | dsi0indirect_path_div2_clk 18 * | | 19 * +------+ | +----+ | |\ dsi0byte_mux 20 * dsi0vco_clk --o--| DIV1 |--o--| /2 |--o--| \ | 21 * | +------+ +----+ | m| | +----+ 22 * | | u|--o--| /4 |-- dsi0pllbyte 23 * | | x| +----+ 24 * o--------------------------| / 25 * | |/ 26 * | +------+ 27 * o----------| DIV3 |------------------------- dsi0pll 28 * +------+ 29 */ 30 31#define POLL_MAX_READS 10 32#define POLL_TIMEOUT_US 50 33 34#define VCO_REF_CLK_RATE 19200000 35#define VCO_MIN_RATE 350000000 36#define VCO_MAX_RATE 750000000 37 38/* v2.0.0 28nm LP implementation */ 39#define DSI_PHY_28NM_QUIRK_PHY_LP BIT(0) 40#define DSI_PHY_28NM_QUIRK_PHY_8226 BIT(1) 41 42#define LPFR_LUT_SIZE 10 43struct lpfr_cfg { 44 unsigned long vco_rate; 45 u32 resistance; 46}; 47 48/* Loop filter resistance: */ 49static const struct lpfr_cfg lpfr_lut[LPFR_LUT_SIZE] = { 50 { 479500000, 8 }, 51 { 480000000, 11 }, 52 { 575500000, 8 }, 53 { 576000000, 12 }, 54 { 610500000, 8 }, 55 { 659500000, 9 }, 56 { 671500000, 10 }, 57 { 672000000, 14 }, 58 { 708500000, 10 }, 59 { 750000000, 11 }, 60}; 61 62struct pll_28nm_cached_state { 63 unsigned long vco_rate; 64 u8 postdiv3; 65 u8 postdiv1; 66 u8 byte_mux; 67}; 68 69struct dsi_pll_28nm { 70 struct clk_hw clk_hw; 71 72 struct msm_dsi_phy *phy; 73 74 struct pll_28nm_cached_state cached_state; 75}; 76 77#define to_pll_28nm(x) container_of(x, struct dsi_pll_28nm, clk_hw) 78 79static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm, 80 u32 nb_tries, u32 timeout_us) 81{ 82 bool pll_locked = false; 83 u32 val; 84 85 while (nb_tries--) { 86 val = dsi_phy_read(pll_28nm->phy->pll_base + REG_DSI_28nm_PHY_PLL_STATUS); 87 pll_locked = !!(val & DSI_28nm_PHY_PLL_STATUS_PLL_RDY); 88 89 if (pll_locked) 90 break; 91 92 udelay(timeout_us); 93 } 94 DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* "); 95 96 return pll_locked; 97} 98 99static void pll_28nm_software_reset(struct dsi_pll_28nm *pll_28nm) 100{ 101 void __iomem *base = pll_28nm->phy->pll_base; 102 103 /* 104 * Add HW recommended delays after toggling the software 105 * reset bit off and back on. 106 */ 107 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_TEST_CFG, 108 DSI_28nm_PHY_PLL_TEST_CFG_PLL_SW_RESET, 1); 109 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_TEST_CFG, 0x00, 1); 110} 111 112/* 113 * Clock Callbacks 114 */ 115static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate, 116 unsigned long parent_rate) 117{ 118 struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw); 119 struct device *dev = &pll_28nm->phy->pdev->dev; 120 void __iomem *base = pll_28nm->phy->pll_base; 121 unsigned long div_fbx1000, gen_vco_clk; 122 u32 refclk_cfg, frac_n_mode, frac_n_value; 123 u32 sdm_cfg0, sdm_cfg1, sdm_cfg2, sdm_cfg3; 124 u32 cal_cfg10, cal_cfg11; 125 u32 rem; 126 int i; 127 128 VERB("rate=%lu, parent's=%lu", rate, parent_rate); 129 130 /* Force postdiv2 to be div-4 */ 131 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV2_CFG, 3); 132 133 /* Configure the Loop filter resistance */ 134 for (i = 0; i < LPFR_LUT_SIZE; i++) 135 if (rate <= lpfr_lut[i].vco_rate) 136 break; 137 if (i == LPFR_LUT_SIZE) { 138 DRM_DEV_ERROR(dev, "unable to get loop filter resistance. vco=%lu\n", 139 rate); 140 return -EINVAL; 141 } 142 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_LPFR_CFG, lpfr_lut[i].resistance); 143 144 /* Loop filter capacitance values : c1 and c2 */ 145 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_LPFC1_CFG, 0x70); 146 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_LPFC2_CFG, 0x15); 147 148 rem = rate % VCO_REF_CLK_RATE; 149 if (rem) { 150 refclk_cfg = DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR; 151 frac_n_mode = 1; 152 div_fbx1000 = rate / (VCO_REF_CLK_RATE / 500); 153 gen_vco_clk = div_fbx1000 * (VCO_REF_CLK_RATE / 500); 154 } else { 155 refclk_cfg = 0x0; 156 frac_n_mode = 0; 157 div_fbx1000 = rate / (VCO_REF_CLK_RATE / 1000); 158 gen_vco_clk = div_fbx1000 * (VCO_REF_CLK_RATE / 1000); 159 } 160 161 DBG("refclk_cfg = %d", refclk_cfg); 162 163 rem = div_fbx1000 % 1000; 164 frac_n_value = (rem << 16) / 1000; 165 166 DBG("div_fb = %lu", div_fbx1000); 167 DBG("frac_n_value = %d", frac_n_value); 168 169 DBG("Generated VCO Clock: %lu", gen_vco_clk); 170 rem = 0; 171 sdm_cfg1 = dsi_phy_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1); 172 sdm_cfg1 &= ~DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET__MASK; 173 if (frac_n_mode) { 174 sdm_cfg0 = 0x0; 175 sdm_cfg0 |= DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV(0); 176 sdm_cfg1 |= DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET( 177 (u32)(((div_fbx1000 / 1000) & 0x3f) - 1)); 178 sdm_cfg3 = frac_n_value >> 8; 179 sdm_cfg2 = frac_n_value & 0xff; 180 } else { 181 sdm_cfg0 = DSI_28nm_PHY_PLL_SDM_CFG0_BYP; 182 sdm_cfg0 |= DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV( 183 (u32)(((div_fbx1000 / 1000) & 0x3f) - 1)); 184 sdm_cfg1 |= DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET(0); 185 sdm_cfg2 = 0; 186 sdm_cfg3 = 0; 187 } 188 189 DBG("sdm_cfg0=%d", sdm_cfg0); 190 DBG("sdm_cfg1=%d", sdm_cfg1); 191 DBG("sdm_cfg2=%d", sdm_cfg2); 192 DBG("sdm_cfg3=%d", sdm_cfg3); 193 194 cal_cfg11 = (u32)(gen_vco_clk / (256 * 1000000)); 195 cal_cfg10 = (u32)((gen_vco_clk % (256 * 1000000)) / 1000000); 196 DBG("cal_cfg10=%d, cal_cfg11=%d", cal_cfg10, cal_cfg11); 197 198 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_CHGPUMP_CFG, 0x02); 199 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG3, 0x2b); 200 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG4, 0x06); 201 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d); 202 203 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1, sdm_cfg1); 204 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG2, 205 DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0(sdm_cfg2)); 206 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG3, 207 DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8(sdm_cfg3)); 208 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG4, 0x00); 209 210 /* Add hardware recommended delay for correct PLL configuration */ 211 if (pll_28nm->phy->cfg->quirks & DSI_PHY_28NM_QUIRK_PHY_LP) 212 udelay(1000); 213 else 214 udelay(1); 215 216 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_REFCLK_CFG, refclk_cfg); 217 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_PWRGEN_CFG, 0x00); 218 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_VCOLPF_CFG, 0x31); 219 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0, sdm_cfg0); 220 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG0, 0x12); 221 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG6, 0x30); 222 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG7, 0x00); 223 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG8, 0x60); 224 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG9, 0x00); 225 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG10, cal_cfg10 & 0xff); 226 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG11, cal_cfg11 & 0xff); 227 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_EFUSE_CFG, 0x20); 228 229 return 0; 230} 231 232static int dsi_pll_28nm_clk_is_enabled(struct clk_hw *hw) 233{ 234 struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw); 235 236 return pll_28nm_poll_for_ready(pll_28nm, POLL_MAX_READS, 237 POLL_TIMEOUT_US); 238} 239 240static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw, 241 unsigned long parent_rate) 242{ 243 struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw); 244 void __iomem *base = pll_28nm->phy->pll_base; 245 u32 sdm0, doubler, sdm_byp_div; 246 u32 sdm_dc_off, sdm_freq_seed, sdm2, sdm3; 247 u32 ref_clk = VCO_REF_CLK_RATE; 248 unsigned long vco_rate; 249 250 VERB("parent_rate=%lu", parent_rate); 251 252 /* Check to see if the ref clk doubler is enabled */ 253 doubler = dsi_phy_read(base + REG_DSI_28nm_PHY_PLL_REFCLK_CFG) & 254 DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR; 255 ref_clk += (doubler * VCO_REF_CLK_RATE); 256 257 /* see if it is integer mode or sdm mode */ 258 sdm0 = dsi_phy_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0); 259 if (sdm0 & DSI_28nm_PHY_PLL_SDM_CFG0_BYP) { 260 /* integer mode */ 261 sdm_byp_div = FIELD( 262 dsi_phy_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0), 263 DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV) + 1; 264 vco_rate = ref_clk * sdm_byp_div; 265 } else { 266 /* sdm mode */ 267 sdm_dc_off = FIELD( 268 dsi_phy_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1), 269 DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET); 270 DBG("sdm_dc_off = %d", sdm_dc_off); 271 sdm2 = FIELD(dsi_phy_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG2), 272 DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0); 273 sdm3 = FIELD(dsi_phy_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG3), 274 DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8); 275 sdm_freq_seed = (sdm3 << 8) | sdm2; 276 DBG("sdm_freq_seed = %d", sdm_freq_seed); 277 278 vco_rate = (ref_clk * (sdm_dc_off + 1)) + 279 mult_frac(ref_clk, sdm_freq_seed, BIT(16)); 280 DBG("vco rate = %lu", vco_rate); 281 } 282 283 DBG("returning vco rate = %lu", vco_rate); 284 285 return vco_rate; 286} 287 288static int _dsi_pll_28nm_vco_prepare_hpm(struct dsi_pll_28nm *pll_28nm) 289{ 290 struct device *dev = &pll_28nm->phy->pdev->dev; 291 void __iomem *base = pll_28nm->phy->pll_base; 292 u32 max_reads = 5, timeout_us = 100; 293 bool locked; 294 u32 val; 295 int i; 296 297 DBG("id=%d", pll_28nm->phy->id); 298 299 pll_28nm_software_reset(pll_28nm); 300 301 /* 302 * PLL power up sequence. 303 * Add necessary delays recommended by hardware. 304 */ 305 val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B; 306 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 1); 307 308 val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B; 309 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200); 310 311 val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; 312 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); 313 314 val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE; 315 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600); 316 317 for (i = 0; i < 2; i++) { 318 /* DSI Uniphy lock detect setting */ 319 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 320 0x0c, 100); 321 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d); 322 323 /* poll for PLL ready status */ 324 locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, 325 timeout_us); 326 if (locked) 327 break; 328 329 pll_28nm_software_reset(pll_28nm); 330 331 /* 332 * PLL power up sequence. 333 * Add necessary delays recommended by hardware. 334 */ 335 val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B; 336 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 1); 337 338 val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B; 339 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200); 340 341 val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; 342 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 250); 343 344 val &= ~DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; 345 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200); 346 347 val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; 348 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); 349 350 val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE; 351 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600); 352 } 353 354 if (unlikely(!locked)) 355 DRM_DEV_ERROR(dev, "DSI PLL lock failed\n"); 356 else 357 DBG("DSI PLL Lock success"); 358 359 return locked ? 0 : -EINVAL; 360} 361 362static int dsi_pll_28nm_vco_prepare_hpm(struct clk_hw *hw) 363{ 364 struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw); 365 int i, ret; 366 367 if (unlikely(pll_28nm->phy->pll_on)) 368 return 0; 369 370 for (i = 0; i < 3; i++) { 371 ret = _dsi_pll_28nm_vco_prepare_hpm(pll_28nm); 372 if (!ret) { 373 pll_28nm->phy->pll_on = true; 374 return 0; 375 } 376 } 377 378 return ret; 379} 380 381static int dsi_pll_28nm_vco_prepare_8226(struct clk_hw *hw) 382{ 383 struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw); 384 struct device *dev = &pll_28nm->phy->pdev->dev; 385 void __iomem *base = pll_28nm->phy->pll_base; 386 u32 max_reads = 5, timeout_us = 100; 387 bool locked; 388 u32 val; 389 int i; 390 391 DBG("id=%d", pll_28nm->phy->id); 392 393 pll_28nm_software_reset(pll_28nm); 394 395 /* 396 * PLL power up sequence. 397 * Add necessary delays recommended by hardware. 398 */ 399 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG1, 0x34); 400 401 val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B; 402 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200); 403 404 val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B; 405 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200); 406 407 val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; 408 val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE; 409 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600); 410 411 for (i = 0; i < 7; i++) { 412 /* DSI Uniphy lock detect setting */ 413 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d); 414 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 415 0x0c, 100); 416 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d); 417 418 /* poll for PLL ready status */ 419 locked = pll_28nm_poll_for_ready(pll_28nm, 420 max_reads, timeout_us); 421 if (locked) 422 break; 423 424 pll_28nm_software_reset(pll_28nm); 425 426 /* 427 * PLL power up sequence. 428 * Add necessary delays recommended by hardware. 429 */ 430 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_PWRGEN_CFG, 0x00, 50); 431 432 val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B; 433 val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B; 434 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 100); 435 436 val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; 437 val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE; 438 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600); 439 } 440 441 if (unlikely(!locked)) 442 DRM_DEV_ERROR(dev, "DSI PLL lock failed\n"); 443 else 444 DBG("DSI PLL Lock success"); 445 446 return locked ? 0 : -EINVAL; 447} 448 449static int dsi_pll_28nm_vco_prepare_lp(struct clk_hw *hw) 450{ 451 struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw); 452 struct device *dev = &pll_28nm->phy->pdev->dev; 453 void __iomem *base = pll_28nm->phy->pll_base; 454 bool locked; 455 u32 max_reads = 10, timeout_us = 50; 456 u32 val; 457 458 DBG("id=%d", pll_28nm->phy->id); 459 460 if (unlikely(pll_28nm->phy->pll_on)) 461 return 0; 462 463 pll_28nm_software_reset(pll_28nm); 464 465 /* 466 * PLL power up sequence. 467 * Add necessary delays recommended by hardware. 468 */ 469 dsi_phy_write_ndelay(base + REG_DSI_28nm_PHY_PLL_CAL_CFG1, 0x34, 500); 470 471 val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B; 472 dsi_phy_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); 473 474 val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B; 475 dsi_phy_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); 476 477 val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B | 478 DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE; 479 dsi_phy_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); 480 481 /* DSI PLL toggle lock detect setting */ 482 dsi_phy_write_ndelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x04, 500); 483 dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x05, 512); 484 485 locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us); 486 487 if (unlikely(!locked)) { 488 DRM_DEV_ERROR(dev, "DSI PLL lock failed\n"); 489 return -EINVAL; 490 } 491 492 DBG("DSI PLL lock success"); 493 pll_28nm->phy->pll_on = true; 494 495 return 0; 496} 497 498static void dsi_pll_28nm_vco_unprepare(struct clk_hw *hw) 499{ 500 struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw); 501 502 DBG("id=%d", pll_28nm->phy->id); 503 504 if (unlikely(!pll_28nm->phy->pll_on)) 505 return; 506 507 dsi_phy_write(pll_28nm->phy->pll_base + REG_DSI_28nm_PHY_PLL_GLB_CFG, 0x00); 508 509 pll_28nm->phy->pll_on = false; 510} 511 512static long dsi_pll_28nm_clk_round_rate(struct clk_hw *hw, 513 unsigned long rate, unsigned long *parent_rate) 514{ 515 struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw); 516 517 if (rate < pll_28nm->phy->cfg->min_pll_rate) 518 return pll_28nm->phy->cfg->min_pll_rate; 519 else if (rate > pll_28nm->phy->cfg->max_pll_rate) 520 return pll_28nm->phy->cfg->max_pll_rate; 521 else 522 return rate; 523} 524 525static const struct clk_ops clk_ops_dsi_pll_28nm_vco_hpm = { 526 .round_rate = dsi_pll_28nm_clk_round_rate, 527 .set_rate = dsi_pll_28nm_clk_set_rate, 528 .recalc_rate = dsi_pll_28nm_clk_recalc_rate, 529 .prepare = dsi_pll_28nm_vco_prepare_hpm, 530 .unprepare = dsi_pll_28nm_vco_unprepare, 531 .is_enabled = dsi_pll_28nm_clk_is_enabled, 532}; 533 534static const struct clk_ops clk_ops_dsi_pll_28nm_vco_lp = { 535 .round_rate = dsi_pll_28nm_clk_round_rate, 536 .set_rate = dsi_pll_28nm_clk_set_rate, 537 .recalc_rate = dsi_pll_28nm_clk_recalc_rate, 538 .prepare = dsi_pll_28nm_vco_prepare_lp, 539 .unprepare = dsi_pll_28nm_vco_unprepare, 540 .is_enabled = dsi_pll_28nm_clk_is_enabled, 541}; 542 543static const struct clk_ops clk_ops_dsi_pll_28nm_vco_8226 = { 544 .round_rate = dsi_pll_28nm_clk_round_rate, 545 .set_rate = dsi_pll_28nm_clk_set_rate, 546 .recalc_rate = dsi_pll_28nm_clk_recalc_rate, 547 .prepare = dsi_pll_28nm_vco_prepare_8226, 548 .unprepare = dsi_pll_28nm_vco_unprepare, 549 .is_enabled = dsi_pll_28nm_clk_is_enabled, 550}; 551 552/* 553 * PLL Callbacks 554 */ 555 556static void dsi_28nm_pll_save_state(struct msm_dsi_phy *phy) 557{ 558 struct dsi_pll_28nm *pll_28nm = to_pll_28nm(phy->vco_hw); 559 struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state; 560 void __iomem *base = pll_28nm->phy->pll_base; 561 562 cached_state->postdiv3 = 563 dsi_phy_read(base + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG); 564 cached_state->postdiv1 = 565 dsi_phy_read(base + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG); 566 cached_state->byte_mux = dsi_phy_read(base + REG_DSI_28nm_PHY_PLL_VREG_CFG); 567 if (dsi_pll_28nm_clk_is_enabled(phy->vco_hw)) 568 cached_state->vco_rate = clk_hw_get_rate(phy->vco_hw); 569 else 570 cached_state->vco_rate = 0; 571} 572 573static int dsi_28nm_pll_restore_state(struct msm_dsi_phy *phy) 574{ 575 struct dsi_pll_28nm *pll_28nm = to_pll_28nm(phy->vco_hw); 576 struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state; 577 void __iomem *base = pll_28nm->phy->pll_base; 578 int ret; 579 580 ret = dsi_pll_28nm_clk_set_rate(phy->vco_hw, 581 cached_state->vco_rate, 0); 582 if (ret) { 583 DRM_DEV_ERROR(&pll_28nm->phy->pdev->dev, 584 "restore vco rate failed. ret=%d\n", ret); 585 return ret; 586 } 587 588 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG, 589 cached_state->postdiv3); 590 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG, 591 cached_state->postdiv1); 592 dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_VREG_CFG, 593 cached_state->byte_mux); 594 595 return 0; 596} 597 598static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **provided_clocks) 599{ 600 char clk_name[32]; 601 struct clk_init_data vco_init = { 602 .parent_data = &(const struct clk_parent_data) { 603 .fw_name = "ref", .name = "xo", 604 }, 605 .num_parents = 1, 606 .name = clk_name, 607 .flags = CLK_IGNORE_UNUSED, 608 }; 609 struct device *dev = &pll_28nm->phy->pdev->dev; 610 struct clk_hw *hw, *analog_postdiv, *indirect_path_div2, *byte_mux; 611 int ret; 612 613 DBG("%d", pll_28nm->phy->id); 614 615 if (pll_28nm->phy->cfg->quirks & DSI_PHY_28NM_QUIRK_PHY_LP) 616 vco_init.ops = &clk_ops_dsi_pll_28nm_vco_lp; 617 else if (pll_28nm->phy->cfg->quirks & DSI_PHY_28NM_QUIRK_PHY_8226) 618 vco_init.ops = &clk_ops_dsi_pll_28nm_vco_8226; 619 else 620 vco_init.ops = &clk_ops_dsi_pll_28nm_vco_hpm; 621 622 snprintf(clk_name, sizeof(clk_name), "dsi%dvco_clk", pll_28nm->phy->id); 623 pll_28nm->clk_hw.init = &vco_init; 624 ret = devm_clk_hw_register(dev, &pll_28nm->clk_hw); 625 if (ret) 626 return ret; 627 628 snprintf(clk_name, sizeof(clk_name), "dsi%danalog_postdiv_clk", pll_28nm->phy->id); 629 analog_postdiv = devm_clk_hw_register_divider_parent_hw(dev, clk_name, 630 &pll_28nm->clk_hw, CLK_SET_RATE_PARENT, 631 pll_28nm->phy->pll_base + 632 REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG, 633 0, 4, 0, NULL); 634 if (IS_ERR(analog_postdiv)) 635 return PTR_ERR(analog_postdiv); 636 637 snprintf(clk_name, sizeof(clk_name), "dsi%dindirect_path_div2_clk", pll_28nm->phy->id); 638 indirect_path_div2 = devm_clk_hw_register_fixed_factor_parent_hw(dev, 639 clk_name, analog_postdiv, CLK_SET_RATE_PARENT, 1, 2); 640 if (IS_ERR(indirect_path_div2)) 641 return PTR_ERR(indirect_path_div2); 642 643 snprintf(clk_name, sizeof(clk_name), "dsi%dpll", pll_28nm->phy->id); 644 hw = devm_clk_hw_register_divider_parent_hw(dev, clk_name, 645 &pll_28nm->clk_hw, 0, pll_28nm->phy->pll_base + 646 REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG, 647 0, 8, 0, NULL); 648 if (IS_ERR(hw)) 649 return PTR_ERR(hw); 650 provided_clocks[DSI_PIXEL_PLL_CLK] = hw; 651 652 snprintf(clk_name, sizeof(clk_name), "dsi%dbyte_mux", pll_28nm->phy->id); 653 byte_mux = devm_clk_hw_register_mux_parent_hws(dev, clk_name, 654 ((const struct clk_hw *[]){ 655 &pll_28nm->clk_hw, 656 indirect_path_div2, 657 }), 2, CLK_SET_RATE_PARENT, pll_28nm->phy->pll_base + 658 REG_DSI_28nm_PHY_PLL_VREG_CFG, 1, 1, 0, NULL); 659 if (IS_ERR(byte_mux)) 660 return PTR_ERR(byte_mux); 661 662 snprintf(clk_name, sizeof(clk_name), "dsi%dpllbyte", pll_28nm->phy->id); 663 hw = devm_clk_hw_register_fixed_factor_parent_hw(dev, clk_name, 664 byte_mux, CLK_SET_RATE_PARENT, 1, 4); 665 if (IS_ERR(hw)) 666 return PTR_ERR(hw); 667 provided_clocks[DSI_BYTE_PLL_CLK] = hw; 668 669 return 0; 670} 671 672static int dsi_pll_28nm_init(struct msm_dsi_phy *phy) 673{ 674 struct platform_device *pdev = phy->pdev; 675 struct dsi_pll_28nm *pll_28nm; 676 int ret; 677 678 if (!pdev) 679 return -ENODEV; 680 681 pll_28nm = devm_kzalloc(&pdev->dev, sizeof(*pll_28nm), GFP_KERNEL); 682 if (!pll_28nm) 683 return -ENOMEM; 684 685 pll_28nm->phy = phy; 686 687 ret = pll_28nm_register(pll_28nm, phy->provided_clocks->hws); 688 if (ret) { 689 DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret); 690 return ret; 691 } 692 693 phy->vco_hw = &pll_28nm->clk_hw; 694 695 return 0; 696} 697 698static void dsi_28nm_dphy_set_timing(struct msm_dsi_phy *phy, 699 struct msm_dsi_dphy_timing *timing) 700{ 701 void __iomem *base = phy->base; 702 703 dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_0, 704 DSI_28nm_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero)); 705 dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_1, 706 DSI_28nm_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail)); 707 dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_2, 708 DSI_28nm_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare)); 709 if (timing->clk_zero & BIT(8)) 710 dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_3, 711 DSI_28nm_PHY_TIMING_CTRL_3_CLK_ZERO_8); 712 dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_4, 713 DSI_28nm_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit)); 714 dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_5, 715 DSI_28nm_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero)); 716 dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_6, 717 DSI_28nm_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare)); 718 dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_7, 719 DSI_28nm_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail)); 720 dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_8, 721 DSI_28nm_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst)); 722 dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_9, 723 DSI_28nm_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) | 724 DSI_28nm_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure)); 725 dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_10, 726 DSI_28nm_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get)); 727 dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_11, 728 DSI_28nm_PHY_TIMING_CTRL_11_TRIG3_CMD(0)); 729} 730 731static void dsi_28nm_phy_regulator_enable_dcdc(struct msm_dsi_phy *phy) 732{ 733 void __iomem *base = phy->reg_base; 734 735 dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x0); 736 dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 1); 737 dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_5, 0); 738 dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_3, 0); 739 dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_2, 0x3); 740 dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_1, 0x9); 741 dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x7); 742 dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_4, 0x20); 743 dsi_phy_write(phy->base + REG_DSI_28nm_PHY_LDO_CNTRL, 0x00); 744} 745 746static void dsi_28nm_phy_regulator_enable_ldo(struct msm_dsi_phy *phy) 747{ 748 void __iomem *base = phy->reg_base; 749 750 dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x0); 751 dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 0); 752 dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_5, 0x7); 753 dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_3, 0); 754 dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_2, 0x1); 755 dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_1, 0x1); 756 dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_4, 0x20); 757 758 if (phy->cfg->quirks & DSI_PHY_28NM_QUIRK_PHY_LP) 759 dsi_phy_write(phy->base + REG_DSI_28nm_PHY_LDO_CNTRL, 0x05); 760 else 761 dsi_phy_write(phy->base + REG_DSI_28nm_PHY_LDO_CNTRL, 0x0d); 762} 763 764static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable) 765{ 766 if (!enable) { 767 dsi_phy_write(phy->reg_base + 768 REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 0); 769 return; 770 } 771 772 if (phy->regulator_ldo_mode) 773 dsi_28nm_phy_regulator_enable_ldo(phy); 774 else 775 dsi_28nm_phy_regulator_enable_dcdc(phy); 776} 777 778static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, 779 struct msm_dsi_phy_clk_request *clk_req) 780{ 781 struct msm_dsi_dphy_timing *timing = &phy->timing; 782 int i; 783 void __iomem *base = phy->base; 784 u32 val; 785 786 DBG(""); 787 788 if (msm_dsi_dphy_timing_calc(timing, clk_req)) { 789 DRM_DEV_ERROR(&phy->pdev->dev, 790 "%s: D-PHY timing calculation failed\n", 791 __func__); 792 return -EINVAL; 793 } 794 795 dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_0, 0xff); 796 797 dsi_28nm_phy_regulator_ctrl(phy, true); 798 799 dsi_28nm_dphy_set_timing(phy, timing); 800 801 dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_1, 0x00); 802 dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f); 803 804 dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_1, 0x6); 805 806 for (i = 0; i < 4; i++) { 807 dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_0(i), 0); 808 dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_1(i), 0); 809 dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_2(i), 0); 810 dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_3(i), 0); 811 dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(i), 0); 812 dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_DATAPATH(i), 0); 813 dsi_phy_write(base + REG_DSI_28nm_PHY_LN_DEBUG_SEL(i), 0); 814 dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_0(i), 0x1); 815 dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_1(i), 0x97); 816 } 817 818 dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_CFG_4, 0); 819 dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_CFG_1, 0xc0); 820 dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR0, 0x1); 821 dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR1, 0xbb); 822 823 dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f); 824 825 val = dsi_phy_read(base + REG_DSI_28nm_PHY_GLBL_TEST_CTRL); 826 if (phy->id == DSI_1 && phy->usecase == MSM_DSI_PHY_SLAVE) 827 val &= ~DSI_28nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL; 828 else 829 val |= DSI_28nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL; 830 dsi_phy_write(base + REG_DSI_28nm_PHY_GLBL_TEST_CTRL, val); 831 832 return 0; 833} 834 835static void dsi_28nm_phy_disable(struct msm_dsi_phy *phy) 836{ 837 dsi_phy_write(phy->base + REG_DSI_28nm_PHY_CTRL_0, 0); 838 dsi_28nm_phy_regulator_ctrl(phy, false); 839 840 /* 841 * Wait for the registers writes to complete in order to 842 * ensure that the phy is completely disabled 843 */ 844 wmb(); 845} 846 847static const struct regulator_bulk_data dsi_phy_28nm_regulators[] = { 848 { .supply = "vddio", .init_load_uA = 100000 }, 849}; 850 851const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs = { 852 .has_phy_regulator = true, 853 .regulator_data = dsi_phy_28nm_regulators, 854 .num_regulators = ARRAY_SIZE(dsi_phy_28nm_regulators), 855 .ops = { 856 .enable = dsi_28nm_phy_enable, 857 .disable = dsi_28nm_phy_disable, 858 .pll_init = dsi_pll_28nm_init, 859 .save_pll_state = dsi_28nm_pll_save_state, 860 .restore_pll_state = dsi_28nm_pll_restore_state, 861 }, 862 .min_pll_rate = VCO_MIN_RATE, 863 .max_pll_rate = VCO_MAX_RATE, 864 .io_start = { 0xfd922b00, 0xfd923100 }, 865 .num_dsi_phy = 2, 866}; 867 868const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_famb_cfgs = { 869 .has_phy_regulator = true, 870 .regulator_data = dsi_phy_28nm_regulators, 871 .num_regulators = ARRAY_SIZE(dsi_phy_28nm_regulators), 872 .ops = { 873 .enable = dsi_28nm_phy_enable, 874 .disable = dsi_28nm_phy_disable, 875 .pll_init = dsi_pll_28nm_init, 876 .save_pll_state = dsi_28nm_pll_save_state, 877 .restore_pll_state = dsi_28nm_pll_restore_state, 878 }, 879 .min_pll_rate = VCO_MIN_RATE, 880 .max_pll_rate = VCO_MAX_RATE, 881 .io_start = { 0x1a94400, 0x1a96400 }, 882 .num_dsi_phy = 2, 883}; 884 885const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = { 886 .has_phy_regulator = true, 887 .regulator_data = dsi_phy_28nm_regulators, 888 .num_regulators = ARRAY_SIZE(dsi_phy_28nm_regulators), 889 .ops = { 890 .enable = dsi_28nm_phy_enable, 891 .disable = dsi_28nm_phy_disable, 892 .pll_init = dsi_pll_28nm_init, 893 .save_pll_state = dsi_28nm_pll_save_state, 894 .restore_pll_state = dsi_28nm_pll_restore_state, 895 }, 896 .min_pll_rate = VCO_MIN_RATE, 897 .max_pll_rate = VCO_MAX_RATE, 898 .io_start = { 0x1a98500 }, 899 .num_dsi_phy = 1, 900 .quirks = DSI_PHY_28NM_QUIRK_PHY_LP, 901}; 902 903const struct msm_dsi_phy_cfg dsi_phy_28nm_8226_cfgs = { 904 .has_phy_regulator = true, 905 .regulator_data = dsi_phy_28nm_regulators, 906 .num_regulators = ARRAY_SIZE(dsi_phy_28nm_regulators), 907 .ops = { 908 .enable = dsi_28nm_phy_enable, 909 .disable = dsi_28nm_phy_disable, 910 .pll_init = dsi_pll_28nm_init, 911 .save_pll_state = dsi_28nm_pll_save_state, 912 .restore_pll_state = dsi_28nm_pll_restore_state, 913 }, 914 .min_pll_rate = VCO_MIN_RATE, 915 .max_pll_rate = VCO_MAX_RATE, 916 .io_start = { 0xfd922b00 }, 917 .num_dsi_phy = 1, 918 .quirks = DSI_PHY_28NM_QUIRK_PHY_8226, 919}; 920