1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright �� 2006-2011 Intel Corporation 4 * 5 * Authors: 6 * Eric Anholt <eric@anholt.net> 7 * Patrik Jakobsson <patrik.r.jakobsson@gmail.com> 8 */ 9 10#include <linux/delay.h> 11#include <linux/highmem.h> 12 13#include <drm/drm_crtc.h> 14#include <drm/drm_crtc_helper.h> 15#include <drm/drm_fourcc.h> 16#include <drm/drm_framebuffer.h> 17#include <drm/drm_modeset_helper_vtables.h> 18#include <drm/drm_vblank.h> 19 20#include "framebuffer.h" 21#include "gem.h" 22#include "gma_display.h" 23#include "psb_irq.h" 24#include "psb_intel_drv.h" 25#include "psb_intel_reg.h" 26 27/* 28 * Returns whether any output on the specified pipe is of the specified type 29 */ 30bool gma_pipe_has_type(struct drm_crtc *crtc, int type) 31{ 32 struct drm_device *dev = crtc->dev; 33 struct drm_connector_list_iter conn_iter; 34 struct drm_connector *connector; 35 36 drm_connector_list_iter_begin(dev, &conn_iter); 37 drm_for_each_connector_iter(connector, &conn_iter) { 38 if (connector->encoder && connector->encoder->crtc == crtc) { 39 struct gma_encoder *gma_encoder = 40 gma_attached_encoder(connector); 41 if (gma_encoder->type == type) { 42 drm_connector_list_iter_end(&conn_iter); 43 return true; 44 } 45 } 46 } 47 drm_connector_list_iter_end(&conn_iter); 48 49 return false; 50} 51 52void gma_wait_for_vblank(struct drm_device *dev) 53{ 54 /* Wait for 20ms, i.e. one cycle at 50hz. */ 55 mdelay(20); 56} 57 58int gma_pipe_set_base(struct drm_crtc *crtc, int x, int y, 59 struct drm_framebuffer *old_fb) 60{ 61 struct drm_device *dev = crtc->dev; 62 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 63 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 64 struct drm_framebuffer *fb = crtc->primary->fb; 65 struct psb_gem_object *pobj; 66 int pipe = gma_crtc->pipe; 67 const struct psb_offset *map = &dev_priv->regmap[pipe]; 68 unsigned long start, offset; 69 u32 dspcntr; 70 int ret = 0; 71 72 if (!gma_power_begin(dev, true)) 73 return 0; 74 75 /* no fb bound */ 76 if (!fb) { 77 dev_err(dev->dev, "No FB bound\n"); 78 goto gma_pipe_cleaner; 79 } 80 81 pobj = to_psb_gem_object(fb->obj[0]); 82 83 /* We are displaying this buffer, make sure it is actually loaded 84 into the GTT */ 85 ret = psb_gem_pin(pobj); 86 if (ret < 0) 87 goto gma_pipe_set_base_exit; 88 start = pobj->offset; 89 offset = y * fb->pitches[0] + x * fb->format->cpp[0]; 90 91 REG_WRITE(map->stride, fb->pitches[0]); 92 93 dspcntr = REG_READ(map->cntr); 94 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; 95 96 switch (fb->format->cpp[0] * 8) { 97 case 8: 98 dspcntr |= DISPPLANE_8BPP; 99 break; 100 case 16: 101 if (fb->format->depth == 15) 102 dspcntr |= DISPPLANE_15_16BPP; 103 else 104 dspcntr |= DISPPLANE_16BPP; 105 break; 106 case 24: 107 case 32: 108 dspcntr |= DISPPLANE_32BPP_NO_ALPHA; 109 break; 110 default: 111 dev_err(dev->dev, "Unknown color depth\n"); 112 ret = -EINVAL; 113 goto gma_pipe_set_base_exit; 114 } 115 REG_WRITE(map->cntr, dspcntr); 116 117 dev_dbg(dev->dev, 118 "Writing base %08lX %08lX %d %d\n", start, offset, x, y); 119 120 /* FIXME: Investigate whether this really is the base for psb and why 121 the linear offset is named base for the other chips. map->surf 122 should be the base and map->linoff the offset for all chips */ 123 if (IS_PSB(dev)) { 124 REG_WRITE(map->base, offset + start); 125 REG_READ(map->base); 126 } else { 127 REG_WRITE(map->base, offset); 128 REG_READ(map->base); 129 REG_WRITE(map->surf, start); 130 REG_READ(map->surf); 131 } 132 133gma_pipe_cleaner: 134 /* If there was a previous display we can now unpin it */ 135 if (old_fb) 136 psb_gem_unpin(to_psb_gem_object(old_fb->obj[0])); 137 138gma_pipe_set_base_exit: 139 gma_power_end(dev); 140 return ret; 141} 142 143/* Loads the palette/gamma unit for the CRTC with the prepared values */ 144void gma_crtc_load_lut(struct drm_crtc *crtc) 145{ 146 struct drm_device *dev = crtc->dev; 147 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 148 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 149 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; 150 int palreg = map->palette; 151 u16 *r, *g, *b; 152 int i; 153 154 /* The clocks have to be on to load the palette. */ 155 if (!crtc->enabled) 156 return; 157 158 r = crtc->gamma_store; 159 g = r + crtc->gamma_size; 160 b = g + crtc->gamma_size; 161 162 if (gma_power_begin(dev, false)) { 163 for (i = 0; i < 256; i++) { 164 REG_WRITE(palreg + 4 * i, 165 (((*r++ >> 8) + gma_crtc->lut_adj[i]) << 16) | 166 (((*g++ >> 8) + gma_crtc->lut_adj[i]) << 8) | 167 ((*b++ >> 8) + gma_crtc->lut_adj[i])); 168 } 169 gma_power_end(dev); 170 } else { 171 for (i = 0; i < 256; i++) { 172 /* FIXME: Why pipe[0] and not pipe[..._crtc->pipe]? */ 173 dev_priv->regs.pipe[0].palette[i] = 174 (((*r++ >> 8) + gma_crtc->lut_adj[i]) << 16) | 175 (((*g++ >> 8) + gma_crtc->lut_adj[i]) << 8) | 176 ((*b++ >> 8) + gma_crtc->lut_adj[i]); 177 } 178 179 } 180} 181 182static int gma_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, 183 u16 *blue, u32 size, 184 struct drm_modeset_acquire_ctx *ctx) 185{ 186 gma_crtc_load_lut(crtc); 187 188 return 0; 189} 190 191/* 192 * Sets the power management mode of the pipe and plane. 193 * 194 * This code should probably grow support for turning the cursor off and back 195 * on appropriately at the same time as we're turning the pipe off/on. 196 */ 197void gma_crtc_dpms(struct drm_crtc *crtc, int mode) 198{ 199 struct drm_device *dev = crtc->dev; 200 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 201 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 202 int pipe = gma_crtc->pipe; 203 const struct psb_offset *map = &dev_priv->regmap[pipe]; 204 u32 temp; 205 206 /* XXX: When our outputs are all unaware of DPMS modes other than off 207 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. 208 */ 209 210 if (IS_CDV(dev)) 211 dev_priv->ops->disable_sr(dev); 212 213 switch (mode) { 214 case DRM_MODE_DPMS_ON: 215 case DRM_MODE_DPMS_STANDBY: 216 case DRM_MODE_DPMS_SUSPEND: 217 if (gma_crtc->active) 218 break; 219 220 gma_crtc->active = true; 221 222 /* Enable the DPLL */ 223 temp = REG_READ(map->dpll); 224 if ((temp & DPLL_VCO_ENABLE) == 0) { 225 REG_WRITE(map->dpll, temp); 226 REG_READ(map->dpll); 227 /* Wait for the clocks to stabilize. */ 228 udelay(150); 229 REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); 230 REG_READ(map->dpll); 231 /* Wait for the clocks to stabilize. */ 232 udelay(150); 233 REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); 234 REG_READ(map->dpll); 235 /* Wait for the clocks to stabilize. */ 236 udelay(150); 237 } 238 239 /* Enable the plane */ 240 temp = REG_READ(map->cntr); 241 if ((temp & DISPLAY_PLANE_ENABLE) == 0) { 242 REG_WRITE(map->cntr, 243 temp | DISPLAY_PLANE_ENABLE); 244 /* Flush the plane changes */ 245 REG_WRITE(map->base, REG_READ(map->base)); 246 } 247 248 udelay(150); 249 250 /* Enable the pipe */ 251 temp = REG_READ(map->conf); 252 if ((temp & PIPEACONF_ENABLE) == 0) 253 REG_WRITE(map->conf, temp | PIPEACONF_ENABLE); 254 255 temp = REG_READ(map->status); 256 temp &= ~(0xFFFF); 257 temp |= PIPE_FIFO_UNDERRUN; 258 REG_WRITE(map->status, temp); 259 REG_READ(map->status); 260 261 gma_crtc_load_lut(crtc); 262 263 /* Give the overlay scaler a chance to enable 264 * if it's on this pipe */ 265 /* psb_intel_crtc_dpms_video(crtc, true); TODO */ 266 267 drm_crtc_vblank_on(crtc); 268 break; 269 case DRM_MODE_DPMS_OFF: 270 if (!gma_crtc->active) 271 break; 272 273 gma_crtc->active = false; 274 275 /* Give the overlay scaler a chance to disable 276 * if it's on this pipe */ 277 /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ 278 279 /* Disable the VGA plane that we never use */ 280 REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); 281 282 /* Turn off vblank interrupts */ 283 drm_crtc_vblank_off(crtc); 284 285 /* Wait for vblank for the disable to take effect */ 286 gma_wait_for_vblank(dev); 287 288 /* Disable plane */ 289 temp = REG_READ(map->cntr); 290 if ((temp & DISPLAY_PLANE_ENABLE) != 0) { 291 REG_WRITE(map->cntr, 292 temp & ~DISPLAY_PLANE_ENABLE); 293 /* Flush the plane changes */ 294 REG_WRITE(map->base, REG_READ(map->base)); 295 REG_READ(map->base); 296 } 297 298 /* Disable pipe */ 299 temp = REG_READ(map->conf); 300 if ((temp & PIPEACONF_ENABLE) != 0) { 301 REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE); 302 REG_READ(map->conf); 303 } 304 305 /* Wait for vblank for the disable to take effect. */ 306 gma_wait_for_vblank(dev); 307 308 udelay(150); 309 310 /* Disable DPLL */ 311 temp = REG_READ(map->dpll); 312 if ((temp & DPLL_VCO_ENABLE) != 0) { 313 REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE); 314 REG_READ(map->dpll); 315 } 316 317 /* Wait for the clocks to turn off. */ 318 udelay(150); 319 break; 320 } 321 322 if (IS_CDV(dev)) 323 dev_priv->ops->update_wm(dev, crtc); 324 325 /* Set FIFO watermarks */ 326 REG_WRITE(DSPARB, 0x3F3E); 327} 328 329static int gma_crtc_cursor_set(struct drm_crtc *crtc, 330 struct drm_file *file_priv, uint32_t handle, 331 uint32_t width, uint32_t height) 332{ 333 struct drm_device *dev = crtc->dev; 334 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 335 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 336 int pipe = gma_crtc->pipe; 337 uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; 338 uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; 339 uint32_t temp; 340 size_t addr = 0; 341 struct psb_gem_object *pobj; 342 struct psb_gem_object *cursor_pobj = gma_crtc->cursor_pobj; 343 struct drm_gem_object *obj; 344 void *tmp_dst; 345 int ret = 0, i, cursor_pages; 346 347 /* If we didn't get a handle then turn the cursor off */ 348 if (!handle) { 349 temp = CURSOR_MODE_DISABLE; 350 if (gma_power_begin(dev, false)) { 351 REG_WRITE(control, temp); 352 REG_WRITE(base, 0); 353 gma_power_end(dev); 354 } 355 356 /* Unpin the old GEM object */ 357 if (gma_crtc->cursor_obj) { 358 pobj = to_psb_gem_object(gma_crtc->cursor_obj); 359 psb_gem_unpin(pobj); 360 drm_gem_object_put(gma_crtc->cursor_obj); 361 gma_crtc->cursor_obj = NULL; 362 } 363 return 0; 364 } 365 366 /* Currently we only support 64x64 cursors */ 367 if (width != 64 || height != 64) { 368 dev_dbg(dev->dev, "We currently only support 64x64 cursors\n"); 369 return -EINVAL; 370 } 371 372 obj = drm_gem_object_lookup(file_priv, handle); 373 if (!obj) { 374 ret = -ENOENT; 375 goto unlock; 376 } 377 378 if (obj->size < width * height * 4) { 379 dev_dbg(dev->dev, "Buffer is too small\n"); 380 ret = -ENOMEM; 381 goto unref_cursor; 382 } 383 384 pobj = to_psb_gem_object(obj); 385 386 /* Pin the memory into the GTT */ 387 ret = psb_gem_pin(pobj); 388 if (ret) { 389 dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle); 390 goto unref_cursor; 391 } 392 393 if (dev_priv->ops->cursor_needs_phys) { 394 if (!cursor_pobj) { 395 dev_err(dev->dev, "No hardware cursor mem available"); 396 ret = -ENOMEM; 397 goto unref_cursor; 398 } 399 400 cursor_pages = obj->size / PAGE_SIZE; 401 if (cursor_pages > 4) 402 cursor_pages = 4; /* Prevent overflow */ 403 404 /* Copy the cursor to cursor mem */ 405 tmp_dst = dev_priv->vram_addr + cursor_pobj->offset; 406 for (i = 0; i < cursor_pages; i++) { 407 memcpy_from_page(tmp_dst, pobj->pages[i], 0, PAGE_SIZE); 408 tmp_dst += PAGE_SIZE; 409 } 410 411 addr = gma_crtc->cursor_addr; 412 } else { 413 addr = pobj->offset; 414 gma_crtc->cursor_addr = addr; 415 } 416 417 temp = 0; 418 /* set the pipe for the cursor */ 419 temp |= (pipe << 28); 420 temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; 421 422 if (gma_power_begin(dev, false)) { 423 REG_WRITE(control, temp); 424 REG_WRITE(base, addr); 425 gma_power_end(dev); 426 } 427 428 /* unpin the old bo */ 429 if (gma_crtc->cursor_obj) { 430 pobj = to_psb_gem_object(gma_crtc->cursor_obj); 431 psb_gem_unpin(pobj); 432 drm_gem_object_put(gma_crtc->cursor_obj); 433 } 434 435 gma_crtc->cursor_obj = obj; 436unlock: 437 return ret; 438 439unref_cursor: 440 drm_gem_object_put(obj); 441 return ret; 442} 443 444static int gma_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) 445{ 446 struct drm_device *dev = crtc->dev; 447 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 448 int pipe = gma_crtc->pipe; 449 uint32_t temp = 0; 450 uint32_t addr; 451 452 if (x < 0) { 453 temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT); 454 x = -x; 455 } 456 if (y < 0) { 457 temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT); 458 y = -y; 459 } 460 461 temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT); 462 temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT); 463 464 addr = gma_crtc->cursor_addr; 465 466 if (gma_power_begin(dev, false)) { 467 REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp); 468 REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, addr); 469 gma_power_end(dev); 470 } 471 return 0; 472} 473 474void gma_crtc_prepare(struct drm_crtc *crtc) 475{ 476 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 477 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); 478} 479 480void gma_crtc_commit(struct drm_crtc *crtc) 481{ 482 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 483 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); 484} 485 486void gma_crtc_disable(struct drm_crtc *crtc) 487{ 488 struct psb_gem_object *pobj; 489 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 490 491 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); 492 493 if (crtc->primary->fb) { 494 pobj = to_psb_gem_object(crtc->primary->fb->obj[0]); 495 psb_gem_unpin(pobj); 496 } 497} 498 499void gma_crtc_destroy(struct drm_crtc *crtc) 500{ 501 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 502 503 if (gma_crtc->cursor_pobj) 504 drm_gem_object_put(&gma_crtc->cursor_pobj->base); 505 506 kfree(gma_crtc->crtc_state); 507 drm_crtc_cleanup(crtc); 508 kfree(gma_crtc); 509} 510 511int gma_crtc_page_flip(struct drm_crtc *crtc, 512 struct drm_framebuffer *fb, 513 struct drm_pending_vblank_event *event, 514 uint32_t page_flip_flags, 515 struct drm_modeset_acquire_ctx *ctx) 516{ 517 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 518 struct drm_framebuffer *current_fb = crtc->primary->fb; 519 struct drm_framebuffer *old_fb = crtc->primary->old_fb; 520 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 521 struct drm_device *dev = crtc->dev; 522 unsigned long flags; 523 int ret; 524 525 if (!crtc_funcs->mode_set_base) 526 return -EINVAL; 527 528 /* Using mode_set_base requires the new fb to be set already. */ 529 crtc->primary->fb = fb; 530 531 if (event) { 532 spin_lock_irqsave(&dev->event_lock, flags); 533 534 WARN_ON(drm_crtc_vblank_get(crtc) != 0); 535 536 gma_crtc->page_flip_event = event; 537 spin_unlock_irqrestore(&dev->event_lock, flags); 538 539 /* Call this locked if we want an event at vblank interrupt. */ 540 ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb); 541 if (ret) { 542 spin_lock_irqsave(&dev->event_lock, flags); 543 if (gma_crtc->page_flip_event) { 544 gma_crtc->page_flip_event = NULL; 545 drm_crtc_vblank_put(crtc); 546 } 547 spin_unlock_irqrestore(&dev->event_lock, flags); 548 } 549 } else { 550 ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb); 551 } 552 553 /* Restore previous fb in case of failure. */ 554 if (ret) 555 crtc->primary->fb = current_fb; 556 557 return ret; 558} 559 560const struct drm_crtc_funcs gma_crtc_funcs = { 561 .cursor_set = gma_crtc_cursor_set, 562 .cursor_move = gma_crtc_cursor_move, 563 .gamma_set = gma_crtc_gamma_set, 564 .set_config = drm_crtc_helper_set_config, 565 .destroy = gma_crtc_destroy, 566 .page_flip = gma_crtc_page_flip, 567 .enable_vblank = gma_crtc_enable_vblank, 568 .disable_vblank = gma_crtc_disable_vblank, 569 .get_vblank_counter = gma_crtc_get_vblank_counter, 570}; 571 572/* 573 * Save HW states of given crtc 574 */ 575void gma_crtc_save(struct drm_crtc *crtc) 576{ 577 struct drm_device *dev = crtc->dev; 578 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 579 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 580 struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state; 581 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; 582 uint32_t palette_reg; 583 int i; 584 585 if (!crtc_state) { 586 dev_err(dev->dev, "No CRTC state found\n"); 587 return; 588 } 589 590 crtc_state->saveDSPCNTR = REG_READ(map->cntr); 591 crtc_state->savePIPECONF = REG_READ(map->conf); 592 crtc_state->savePIPESRC = REG_READ(map->src); 593 crtc_state->saveFP0 = REG_READ(map->fp0); 594 crtc_state->saveFP1 = REG_READ(map->fp1); 595 crtc_state->saveDPLL = REG_READ(map->dpll); 596 crtc_state->saveHTOTAL = REG_READ(map->htotal); 597 crtc_state->saveHBLANK = REG_READ(map->hblank); 598 crtc_state->saveHSYNC = REG_READ(map->hsync); 599 crtc_state->saveVTOTAL = REG_READ(map->vtotal); 600 crtc_state->saveVBLANK = REG_READ(map->vblank); 601 crtc_state->saveVSYNC = REG_READ(map->vsync); 602 crtc_state->saveDSPSTRIDE = REG_READ(map->stride); 603 604 /* NOTE: DSPSIZE DSPPOS only for psb */ 605 crtc_state->saveDSPSIZE = REG_READ(map->size); 606 crtc_state->saveDSPPOS = REG_READ(map->pos); 607 608 crtc_state->saveDSPBASE = REG_READ(map->base); 609 610 palette_reg = map->palette; 611 for (i = 0; i < 256; ++i) 612 crtc_state->savePalette[i] = REG_READ(palette_reg + (i << 2)); 613} 614 615/* 616 * Restore HW states of given crtc 617 */ 618void gma_crtc_restore(struct drm_crtc *crtc) 619{ 620 struct drm_device *dev = crtc->dev; 621 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 622 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 623 struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state; 624 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; 625 uint32_t palette_reg; 626 int i; 627 628 if (!crtc_state) { 629 dev_err(dev->dev, "No crtc state\n"); 630 return; 631 } 632 633 if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) { 634 REG_WRITE(map->dpll, 635 crtc_state->saveDPLL & ~DPLL_VCO_ENABLE); 636 REG_READ(map->dpll); 637 udelay(150); 638 } 639 640 REG_WRITE(map->fp0, crtc_state->saveFP0); 641 REG_READ(map->fp0); 642 643 REG_WRITE(map->fp1, crtc_state->saveFP1); 644 REG_READ(map->fp1); 645 646 REG_WRITE(map->dpll, crtc_state->saveDPLL); 647 REG_READ(map->dpll); 648 udelay(150); 649 650 REG_WRITE(map->htotal, crtc_state->saveHTOTAL); 651 REG_WRITE(map->hblank, crtc_state->saveHBLANK); 652 REG_WRITE(map->hsync, crtc_state->saveHSYNC); 653 REG_WRITE(map->vtotal, crtc_state->saveVTOTAL); 654 REG_WRITE(map->vblank, crtc_state->saveVBLANK); 655 REG_WRITE(map->vsync, crtc_state->saveVSYNC); 656 REG_WRITE(map->stride, crtc_state->saveDSPSTRIDE); 657 658 REG_WRITE(map->size, crtc_state->saveDSPSIZE); 659 REG_WRITE(map->pos, crtc_state->saveDSPPOS); 660 661 REG_WRITE(map->src, crtc_state->savePIPESRC); 662 REG_WRITE(map->base, crtc_state->saveDSPBASE); 663 REG_WRITE(map->conf, crtc_state->savePIPECONF); 664 665 gma_wait_for_vblank(dev); 666 667 REG_WRITE(map->cntr, crtc_state->saveDSPCNTR); 668 REG_WRITE(map->base, crtc_state->saveDSPBASE); 669 670 gma_wait_for_vblank(dev); 671 672 palette_reg = map->palette; 673 for (i = 0; i < 256; ++i) 674 REG_WRITE(palette_reg + (i << 2), crtc_state->savePalette[i]); 675} 676 677void gma_encoder_prepare(struct drm_encoder *encoder) 678{ 679 const struct drm_encoder_helper_funcs *encoder_funcs = 680 encoder->helper_private; 681 /* lvds has its own version of prepare see psb_intel_lvds_prepare */ 682 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); 683} 684 685void gma_encoder_commit(struct drm_encoder *encoder) 686{ 687 const struct drm_encoder_helper_funcs *encoder_funcs = 688 encoder->helper_private; 689 /* lvds has its own version of commit see psb_intel_lvds_commit */ 690 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); 691} 692 693void gma_encoder_destroy(struct drm_encoder *encoder) 694{ 695 struct gma_encoder *intel_encoder = to_gma_encoder(encoder); 696 697 drm_encoder_cleanup(encoder); 698 kfree(intel_encoder); 699} 700 701/* Currently there is only a 1:1 mapping of encoders and connectors */ 702struct drm_encoder *gma_best_encoder(struct drm_connector *connector) 703{ 704 struct gma_encoder *gma_encoder = gma_attached_encoder(connector); 705 706 return &gma_encoder->base; 707} 708 709void gma_connector_attach_encoder(struct gma_connector *connector, 710 struct gma_encoder *encoder) 711{ 712 connector->encoder = encoder; 713 drm_connector_attach_encoder(&connector->base, 714 &encoder->base); 715} 716 717#define GMA_PLL_INVALID(s) { /* DRM_ERROR(s); */ return false; } 718 719bool gma_pll_is_valid(struct drm_crtc *crtc, 720 const struct gma_limit_t *limit, 721 struct gma_clock_t *clock) 722{ 723 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) 724 GMA_PLL_INVALID("p1 out of range"); 725 if (clock->p < limit->p.min || limit->p.max < clock->p) 726 GMA_PLL_INVALID("p out of range"); 727 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) 728 GMA_PLL_INVALID("m2 out of range"); 729 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) 730 GMA_PLL_INVALID("m1 out of range"); 731 /* On CDV m1 is always 0 */ 732 if (clock->m1 <= clock->m2 && clock->m1 != 0) 733 GMA_PLL_INVALID("m1 <= m2 && m1 != 0"); 734 if (clock->m < limit->m.min || limit->m.max < clock->m) 735 GMA_PLL_INVALID("m out of range"); 736 if (clock->n < limit->n.min || limit->n.max < clock->n) 737 GMA_PLL_INVALID("n out of range"); 738 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) 739 GMA_PLL_INVALID("vco out of range"); 740 /* XXX: We may need to be checking "Dot clock" 741 * depending on the multiplier, connector, etc., 742 * rather than just a single range. 743 */ 744 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) 745 GMA_PLL_INVALID("dot out of range"); 746 747 return true; 748} 749 750bool gma_find_best_pll(const struct gma_limit_t *limit, 751 struct drm_crtc *crtc, int target, int refclk, 752 struct gma_clock_t *best_clock) 753{ 754 struct drm_device *dev = crtc->dev; 755 const struct gma_clock_funcs *clock_funcs = 756 to_gma_crtc(crtc)->clock_funcs; 757 struct gma_clock_t clock; 758 int err = target; 759 760 if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && 761 (REG_READ(LVDS) & LVDS_PORT_EN) != 0) { 762 /* 763 * For LVDS, if the panel is on, just rely on its current 764 * settings for dual-channel. We haven't figured out how to 765 * reliably set up different single/dual channel state, if we 766 * even can. 767 */ 768 if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) == 769 LVDS_CLKB_POWER_UP) 770 clock.p2 = limit->p2.p2_fast; 771 else 772 clock.p2 = limit->p2.p2_slow; 773 } else { 774 if (target < limit->p2.dot_limit) 775 clock.p2 = limit->p2.p2_slow; 776 else 777 clock.p2 = limit->p2.p2_fast; 778 } 779 780 memset(best_clock, 0, sizeof(*best_clock)); 781 782 /* m1 is always 0 on CDV so the outmost loop will run just once */ 783 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { 784 for (clock.m2 = limit->m2.min; 785 (clock.m2 < clock.m1 || clock.m1 == 0) && 786 clock.m2 <= limit->m2.max; clock.m2++) { 787 for (clock.n = limit->n.min; 788 clock.n <= limit->n.max; clock.n++) { 789 for (clock.p1 = limit->p1.min; 790 clock.p1 <= limit->p1.max; 791 clock.p1++) { 792 int this_err; 793 794 clock_funcs->clock(refclk, &clock); 795 796 if (!clock_funcs->pll_is_valid(crtc, 797 limit, &clock)) 798 continue; 799 800 this_err = abs(clock.dot - target); 801 if (this_err < err) { 802 *best_clock = clock; 803 err = this_err; 804 } 805 } 806 } 807 } 808 } 809 810 return err != target; 811} 812