1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright (C) 2014 Emilio L��pez 4 * Emilio L��pez <emilio@elopez.com.ar> 5 */ 6 7#include <linux/bitmap.h> 8#include <linux/bitops.h> 9#include <linux/clk.h> 10#include <linux/dma-mapping.h> 11#include <linux/dmaengine.h> 12#include <linux/dmapool.h> 13#include <linux/interrupt.h> 14#include <linux/module.h> 15#include <linux/of_dma.h> 16#include <linux/platform_device.h> 17#include <linux/slab.h> 18#include <linux/spinlock.h> 19 20#include "virt-dma.h" 21 22/** Common macros to normal and dedicated DMA registers **/ 23 24#define SUN4I_DMA_CFG_LOADING BIT(31) 25#define SUN4I_DMA_CFG_DST_DATA_WIDTH(width) ((width) << 25) 26#define SUN4I_DMA_CFG_DST_BURST_LENGTH(len) ((len) << 23) 27#define SUN4I_DMA_CFG_DST_ADDR_MODE(mode) ((mode) << 21) 28#define SUN4I_DMA_CFG_DST_DRQ_TYPE(type) ((type) << 16) 29#define SUN4I_DMA_CFG_SRC_DATA_WIDTH(width) ((width) << 9) 30#define SUN4I_DMA_CFG_SRC_BURST_LENGTH(len) ((len) << 7) 31#define SUN4I_DMA_CFG_SRC_ADDR_MODE(mode) ((mode) << 5) 32#define SUN4I_DMA_CFG_SRC_DRQ_TYPE(type) (type) 33 34/** Normal DMA register values **/ 35 36/* Normal DMA source/destination data request type values */ 37#define SUN4I_NDMA_DRQ_TYPE_SDRAM 0x16 38#define SUN4I_NDMA_DRQ_TYPE_LIMIT (0x1F + 1) 39 40/** Normal DMA register layout **/ 41 42/* Dedicated DMA source/destination address mode values */ 43#define SUN4I_NDMA_ADDR_MODE_LINEAR 0 44#define SUN4I_NDMA_ADDR_MODE_IO 1 45 46/* Normal DMA configuration register layout */ 47#define SUN4I_NDMA_CFG_CONT_MODE BIT(30) 48#define SUN4I_NDMA_CFG_WAIT_STATE(n) ((n) << 27) 49#define SUN4I_NDMA_CFG_DST_NON_SECURE BIT(22) 50#define SUN4I_NDMA_CFG_BYTE_COUNT_MODE_REMAIN BIT(15) 51#define SUN4I_NDMA_CFG_SRC_NON_SECURE BIT(6) 52 53/** Dedicated DMA register values **/ 54 55/* Dedicated DMA source/destination address mode values */ 56#define SUN4I_DDMA_ADDR_MODE_LINEAR 0 57#define SUN4I_DDMA_ADDR_MODE_IO 1 58#define SUN4I_DDMA_ADDR_MODE_HORIZONTAL_PAGE 2 59#define SUN4I_DDMA_ADDR_MODE_VERTICAL_PAGE 3 60 61/* Dedicated DMA source/destination data request type values */ 62#define SUN4I_DDMA_DRQ_TYPE_SDRAM 0x1 63#define SUN4I_DDMA_DRQ_TYPE_LIMIT (0x1F + 1) 64 65/** Dedicated DMA register layout **/ 66 67/* Dedicated DMA configuration register layout */ 68#define SUN4I_DDMA_CFG_BUSY BIT(30) 69#define SUN4I_DDMA_CFG_CONT_MODE BIT(29) 70#define SUN4I_DDMA_CFG_DST_NON_SECURE BIT(28) 71#define SUN4I_DDMA_CFG_BYTE_COUNT_MODE_REMAIN BIT(15) 72#define SUN4I_DDMA_CFG_SRC_NON_SECURE BIT(12) 73 74/* Dedicated DMA parameter register layout */ 75#define SUN4I_DDMA_PARA_DST_DATA_BLK_SIZE(n) (((n) - 1) << 24) 76#define SUN4I_DDMA_PARA_DST_WAIT_CYCLES(n) (((n) - 1) << 16) 77#define SUN4I_DDMA_PARA_SRC_DATA_BLK_SIZE(n) (((n) - 1) << 8) 78#define SUN4I_DDMA_PARA_SRC_WAIT_CYCLES(n) (((n) - 1) << 0) 79 80/** DMA register offsets **/ 81 82/* General register offsets */ 83#define SUN4I_DMA_IRQ_ENABLE_REG 0x0 84#define SUN4I_DMA_IRQ_PENDING_STATUS_REG 0x4 85 86/* Normal DMA register offsets */ 87#define SUN4I_NDMA_CHANNEL_REG_BASE(n) (0x100 + (n) * 0x20) 88#define SUN4I_NDMA_CFG_REG 0x0 89#define SUN4I_NDMA_SRC_ADDR_REG 0x4 90#define SUN4I_NDMA_DST_ADDR_REG 0x8 91#define SUN4I_NDMA_BYTE_COUNT_REG 0xC 92 93/* Dedicated DMA register offsets */ 94#define SUN4I_DDMA_CHANNEL_REG_BASE(n) (0x300 + (n) * 0x20) 95#define SUN4I_DDMA_CFG_REG 0x0 96#define SUN4I_DDMA_SRC_ADDR_REG 0x4 97#define SUN4I_DDMA_DST_ADDR_REG 0x8 98#define SUN4I_DDMA_BYTE_COUNT_REG 0xC 99#define SUN4I_DDMA_PARA_REG 0x18 100 101/** DMA Driver **/ 102 103/* 104 * Normal DMA has 8 channels, and Dedicated DMA has another 8, so 105 * that's 16 channels. As for endpoints, there's 29 and 21 106 * respectively. Given that the Normal DMA endpoints (other than 107 * SDRAM) can be used as tx/rx, we need 78 vchans in total 108 */ 109#define SUN4I_NDMA_NR_MAX_CHANNELS 8 110#define SUN4I_DDMA_NR_MAX_CHANNELS 8 111#define SUN4I_DMA_NR_MAX_CHANNELS \ 112 (SUN4I_NDMA_NR_MAX_CHANNELS + SUN4I_DDMA_NR_MAX_CHANNELS) 113#define SUN4I_NDMA_NR_MAX_VCHANS (29 * 2 - 1) 114#define SUN4I_DDMA_NR_MAX_VCHANS 21 115#define SUN4I_DMA_NR_MAX_VCHANS \ 116 (SUN4I_NDMA_NR_MAX_VCHANS + SUN4I_DDMA_NR_MAX_VCHANS) 117 118/* This set of SUN4I_DDMA timing parameters were found experimentally while 119 * working with the SPI driver and seem to make it behave correctly */ 120#define SUN4I_DDMA_MAGIC_SPI_PARAMETERS \ 121 (SUN4I_DDMA_PARA_DST_DATA_BLK_SIZE(1) | \ 122 SUN4I_DDMA_PARA_SRC_DATA_BLK_SIZE(1) | \ 123 SUN4I_DDMA_PARA_DST_WAIT_CYCLES(2) | \ 124 SUN4I_DDMA_PARA_SRC_WAIT_CYCLES(2)) 125 126/* 127 * Normal DMA supports individual transfers (segments) up to 128k. 128 * Dedicated DMA supports transfers up to 16M. We can only report 129 * one size limit, so we have to use the smaller value. 130 */ 131#define SUN4I_NDMA_MAX_SEG_SIZE SZ_128K 132#define SUN4I_DDMA_MAX_SEG_SIZE SZ_16M 133#define SUN4I_DMA_MAX_SEG_SIZE SUN4I_NDMA_MAX_SEG_SIZE 134 135struct sun4i_dma_pchan { 136 /* Register base of channel */ 137 void __iomem *base; 138 /* vchan currently being serviced */ 139 struct sun4i_dma_vchan *vchan; 140 /* Is this a dedicated pchan? */ 141 int is_dedicated; 142}; 143 144struct sun4i_dma_vchan { 145 struct virt_dma_chan vc; 146 struct dma_slave_config cfg; 147 struct sun4i_dma_pchan *pchan; 148 struct sun4i_dma_promise *processing; 149 struct sun4i_dma_contract *contract; 150 u8 endpoint; 151 int is_dedicated; 152}; 153 154struct sun4i_dma_promise { 155 u32 cfg; 156 u32 para; 157 dma_addr_t src; 158 dma_addr_t dst; 159 size_t len; 160 struct list_head list; 161}; 162 163/* A contract is a set of promises */ 164struct sun4i_dma_contract { 165 struct virt_dma_desc vd; 166 struct list_head demands; 167 struct list_head completed_demands; 168 bool is_cyclic : 1; 169 bool use_half_int : 1; 170}; 171 172struct sun4i_dma_dev { 173 DECLARE_BITMAP(pchans_used, SUN4I_DMA_NR_MAX_CHANNELS); 174 struct dma_device slave; 175 struct sun4i_dma_pchan *pchans; 176 struct sun4i_dma_vchan *vchans; 177 void __iomem *base; 178 struct clk *clk; 179 int irq; 180 spinlock_t lock; 181}; 182 183static struct sun4i_dma_dev *to_sun4i_dma_dev(struct dma_device *dev) 184{ 185 return container_of(dev, struct sun4i_dma_dev, slave); 186} 187 188static struct sun4i_dma_vchan *to_sun4i_dma_vchan(struct dma_chan *chan) 189{ 190 return container_of(chan, struct sun4i_dma_vchan, vc.chan); 191} 192 193static struct sun4i_dma_contract *to_sun4i_dma_contract(struct virt_dma_desc *vd) 194{ 195 return container_of(vd, struct sun4i_dma_contract, vd); 196} 197 198static struct device *chan2dev(struct dma_chan *chan) 199{ 200 return &chan->dev->device; 201} 202 203static int convert_burst(u32 maxburst) 204{ 205 if (maxburst > 8) 206 return -EINVAL; 207 208 /* 1 -> 0, 4 -> 1, 8 -> 2 */ 209 return (maxburst >> 2); 210} 211 212static int convert_buswidth(enum dma_slave_buswidth addr_width) 213{ 214 if (addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES) 215 return -EINVAL; 216 217 /* 8 (1 byte) -> 0, 16 (2 bytes) -> 1, 32 (4 bytes) -> 2 */ 218 return (addr_width >> 1); 219} 220 221static void sun4i_dma_free_chan_resources(struct dma_chan *chan) 222{ 223 struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); 224 225 vchan_free_chan_resources(&vchan->vc); 226} 227 228static struct sun4i_dma_pchan *find_and_use_pchan(struct sun4i_dma_dev *priv, 229 struct sun4i_dma_vchan *vchan) 230{ 231 struct sun4i_dma_pchan *pchan = NULL, *pchans = priv->pchans; 232 unsigned long flags; 233 int i, max; 234 235 /* 236 * pchans 0-SUN4I_NDMA_NR_MAX_CHANNELS are normal, and 237 * SUN4I_NDMA_NR_MAX_CHANNELS+ are dedicated ones 238 */ 239 if (vchan->is_dedicated) { 240 i = SUN4I_NDMA_NR_MAX_CHANNELS; 241 max = SUN4I_DMA_NR_MAX_CHANNELS; 242 } else { 243 i = 0; 244 max = SUN4I_NDMA_NR_MAX_CHANNELS; 245 } 246 247 spin_lock_irqsave(&priv->lock, flags); 248 for_each_clear_bit_from(i, priv->pchans_used, max) { 249 pchan = &pchans[i]; 250 pchan->vchan = vchan; 251 set_bit(i, priv->pchans_used); 252 break; 253 } 254 spin_unlock_irqrestore(&priv->lock, flags); 255 256 return pchan; 257} 258 259static void release_pchan(struct sun4i_dma_dev *priv, 260 struct sun4i_dma_pchan *pchan) 261{ 262 unsigned long flags; 263 int nr = pchan - priv->pchans; 264 265 spin_lock_irqsave(&priv->lock, flags); 266 267 pchan->vchan = NULL; 268 clear_bit(nr, priv->pchans_used); 269 270 spin_unlock_irqrestore(&priv->lock, flags); 271} 272 273static void configure_pchan(struct sun4i_dma_pchan *pchan, 274 struct sun4i_dma_promise *d) 275{ 276 /* 277 * Configure addresses and misc parameters depending on type 278 * SUN4I_DDMA has an extra field with timing parameters 279 */ 280 if (pchan->is_dedicated) { 281 writel_relaxed(d->src, pchan->base + SUN4I_DDMA_SRC_ADDR_REG); 282 writel_relaxed(d->dst, pchan->base + SUN4I_DDMA_DST_ADDR_REG); 283 writel_relaxed(d->len, pchan->base + SUN4I_DDMA_BYTE_COUNT_REG); 284 writel_relaxed(d->para, pchan->base + SUN4I_DDMA_PARA_REG); 285 writel_relaxed(d->cfg, pchan->base + SUN4I_DDMA_CFG_REG); 286 } else { 287 writel_relaxed(d->src, pchan->base + SUN4I_NDMA_SRC_ADDR_REG); 288 writel_relaxed(d->dst, pchan->base + SUN4I_NDMA_DST_ADDR_REG); 289 writel_relaxed(d->len, pchan->base + SUN4I_NDMA_BYTE_COUNT_REG); 290 writel_relaxed(d->cfg, pchan->base + SUN4I_NDMA_CFG_REG); 291 } 292} 293 294static void set_pchan_interrupt(struct sun4i_dma_dev *priv, 295 struct sun4i_dma_pchan *pchan, 296 int half, int end) 297{ 298 u32 reg; 299 int pchan_number = pchan - priv->pchans; 300 unsigned long flags; 301 302 spin_lock_irqsave(&priv->lock, flags); 303 304 reg = readl_relaxed(priv->base + SUN4I_DMA_IRQ_ENABLE_REG); 305 306 if (half) 307 reg |= BIT(pchan_number * 2); 308 else 309 reg &= ~BIT(pchan_number * 2); 310 311 if (end) 312 reg |= BIT(pchan_number * 2 + 1); 313 else 314 reg &= ~BIT(pchan_number * 2 + 1); 315 316 writel_relaxed(reg, priv->base + SUN4I_DMA_IRQ_ENABLE_REG); 317 318 spin_unlock_irqrestore(&priv->lock, flags); 319} 320 321/* 322 * Execute pending operations on a vchan 323 * 324 * When given a vchan, this function will try to acquire a suitable 325 * pchan and, if successful, will configure it to fulfill a promise 326 * from the next pending contract. 327 * 328 * This function must be called with &vchan->vc.lock held. 329 */ 330static int __execute_vchan_pending(struct sun4i_dma_dev *priv, 331 struct sun4i_dma_vchan *vchan) 332{ 333 struct sun4i_dma_promise *promise = NULL; 334 struct sun4i_dma_contract *contract = NULL; 335 struct sun4i_dma_pchan *pchan; 336 struct virt_dma_desc *vd; 337 int ret; 338 339 lockdep_assert_held(&vchan->vc.lock); 340 341 /* We need a pchan to do anything, so secure one if available */ 342 pchan = find_and_use_pchan(priv, vchan); 343 if (!pchan) 344 return -EBUSY; 345 346 /* 347 * Channel endpoints must not be repeated, so if this vchan 348 * has already submitted some work, we can't do anything else 349 */ 350 if (vchan->processing) { 351 dev_dbg(chan2dev(&vchan->vc.chan), 352 "processing something to this endpoint already\n"); 353 ret = -EBUSY; 354 goto release_pchan; 355 } 356 357 do { 358 /* Figure out which contract we're working with today */ 359 vd = vchan_next_desc(&vchan->vc); 360 if (!vd) { 361 dev_dbg(chan2dev(&vchan->vc.chan), 362 "No pending contract found"); 363 ret = 0; 364 goto release_pchan; 365 } 366 367 contract = to_sun4i_dma_contract(vd); 368 if (list_empty(&contract->demands)) { 369 /* The contract has been completed so mark it as such */ 370 list_del(&contract->vd.node); 371 vchan_cookie_complete(&contract->vd); 372 dev_dbg(chan2dev(&vchan->vc.chan), 373 "Empty contract found and marked complete"); 374 } 375 } while (list_empty(&contract->demands)); 376 377 /* Now find out what we need to do */ 378 promise = list_first_entry(&contract->demands, 379 struct sun4i_dma_promise, list); 380 vchan->processing = promise; 381 382 /* ... and make it reality */ 383 if (promise) { 384 vchan->contract = contract; 385 vchan->pchan = pchan; 386 set_pchan_interrupt(priv, pchan, contract->use_half_int, 1); 387 configure_pchan(pchan, promise); 388 } 389 390 return 0; 391 392release_pchan: 393 release_pchan(priv, pchan); 394 return ret; 395} 396 397static int sanitize_config(struct dma_slave_config *sconfig, 398 enum dma_transfer_direction direction) 399{ 400 switch (direction) { 401 case DMA_MEM_TO_DEV: 402 if ((sconfig->dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) || 403 !sconfig->dst_maxburst) 404 return -EINVAL; 405 406 if (sconfig->src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) 407 sconfig->src_addr_width = sconfig->dst_addr_width; 408 409 if (!sconfig->src_maxburst) 410 sconfig->src_maxburst = sconfig->dst_maxburst; 411 412 break; 413 414 case DMA_DEV_TO_MEM: 415 if ((sconfig->src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) || 416 !sconfig->src_maxburst) 417 return -EINVAL; 418 419 if (sconfig->dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) 420 sconfig->dst_addr_width = sconfig->src_addr_width; 421 422 if (!sconfig->dst_maxburst) 423 sconfig->dst_maxburst = sconfig->src_maxburst; 424 425 break; 426 default: 427 return 0; 428 } 429 430 return 0; 431} 432 433/* 434 * Generate a promise, to be used in a normal DMA contract. 435 * 436 * A NDMA promise contains all the information required to program the 437 * normal part of the DMA Engine and get data copied. A non-executed 438 * promise will live in the demands list on a contract. Once it has been 439 * completed, it will be moved to the completed demands list for later freeing. 440 * All linked promises will be freed when the corresponding contract is freed 441 */ 442static struct sun4i_dma_promise * 443generate_ndma_promise(struct dma_chan *chan, dma_addr_t src, dma_addr_t dest, 444 size_t len, struct dma_slave_config *sconfig, 445 enum dma_transfer_direction direction) 446{ 447 struct sun4i_dma_promise *promise; 448 int ret; 449 450 ret = sanitize_config(sconfig, direction); 451 if (ret) 452 return NULL; 453 454 promise = kzalloc(sizeof(*promise), GFP_NOWAIT); 455 if (!promise) 456 return NULL; 457 458 promise->src = src; 459 promise->dst = dest; 460 promise->len = len; 461 promise->cfg = SUN4I_DMA_CFG_LOADING | 462 SUN4I_NDMA_CFG_BYTE_COUNT_MODE_REMAIN; 463 464 dev_dbg(chan2dev(chan), 465 "src burst %d, dst burst %d, src buswidth %d, dst buswidth %d", 466 sconfig->src_maxburst, sconfig->dst_maxburst, 467 sconfig->src_addr_width, sconfig->dst_addr_width); 468 469 /* Source burst */ 470 ret = convert_burst(sconfig->src_maxburst); 471 if (ret < 0) 472 goto fail; 473 promise->cfg |= SUN4I_DMA_CFG_SRC_BURST_LENGTH(ret); 474 475 /* Destination burst */ 476 ret = convert_burst(sconfig->dst_maxburst); 477 if (ret < 0) 478 goto fail; 479 promise->cfg |= SUN4I_DMA_CFG_DST_BURST_LENGTH(ret); 480 481 /* Source bus width */ 482 ret = convert_buswidth(sconfig->src_addr_width); 483 if (ret < 0) 484 goto fail; 485 promise->cfg |= SUN4I_DMA_CFG_SRC_DATA_WIDTH(ret); 486 487 /* Destination bus width */ 488 ret = convert_buswidth(sconfig->dst_addr_width); 489 if (ret < 0) 490 goto fail; 491 promise->cfg |= SUN4I_DMA_CFG_DST_DATA_WIDTH(ret); 492 493 return promise; 494 495fail: 496 kfree(promise); 497 return NULL; 498} 499 500/* 501 * Generate a promise, to be used in a dedicated DMA contract. 502 * 503 * A DDMA promise contains all the information required to program the 504 * Dedicated part of the DMA Engine and get data copied. A non-executed 505 * promise will live in the demands list on a contract. Once it has been 506 * completed, it will be moved to the completed demands list for later freeing. 507 * All linked promises will be freed when the corresponding contract is freed 508 */ 509static struct sun4i_dma_promise * 510generate_ddma_promise(struct dma_chan *chan, dma_addr_t src, dma_addr_t dest, 511 size_t len, struct dma_slave_config *sconfig) 512{ 513 struct sun4i_dma_promise *promise; 514 int ret; 515 516 promise = kzalloc(sizeof(*promise), GFP_NOWAIT); 517 if (!promise) 518 return NULL; 519 520 promise->src = src; 521 promise->dst = dest; 522 promise->len = len; 523 promise->cfg = SUN4I_DMA_CFG_LOADING | 524 SUN4I_DDMA_CFG_BYTE_COUNT_MODE_REMAIN; 525 526 /* Source burst */ 527 ret = convert_burst(sconfig->src_maxburst); 528 if (ret < 0) 529 goto fail; 530 promise->cfg |= SUN4I_DMA_CFG_SRC_BURST_LENGTH(ret); 531 532 /* Destination burst */ 533 ret = convert_burst(sconfig->dst_maxburst); 534 if (ret < 0) 535 goto fail; 536 promise->cfg |= SUN4I_DMA_CFG_DST_BURST_LENGTH(ret); 537 538 /* Source bus width */ 539 ret = convert_buswidth(sconfig->src_addr_width); 540 if (ret < 0) 541 goto fail; 542 promise->cfg |= SUN4I_DMA_CFG_SRC_DATA_WIDTH(ret); 543 544 /* Destination bus width */ 545 ret = convert_buswidth(sconfig->dst_addr_width); 546 if (ret < 0) 547 goto fail; 548 promise->cfg |= SUN4I_DMA_CFG_DST_DATA_WIDTH(ret); 549 550 return promise; 551 552fail: 553 kfree(promise); 554 return NULL; 555} 556 557/* 558 * Generate a contract 559 * 560 * Contracts function as DMA descriptors. As our hardware does not support 561 * linked lists, we need to implement SG via software. We use a contract 562 * to hold all the pieces of the request and process them serially one 563 * after another. Each piece is represented as a promise. 564 */ 565static struct sun4i_dma_contract *generate_dma_contract(void) 566{ 567 struct sun4i_dma_contract *contract; 568 569 contract = kzalloc(sizeof(*contract), GFP_NOWAIT); 570 if (!contract) 571 return NULL; 572 573 INIT_LIST_HEAD(&contract->demands); 574 INIT_LIST_HEAD(&contract->completed_demands); 575 576 return contract; 577} 578 579/* 580 * Get next promise on a cyclic transfer 581 * 582 * Cyclic contracts contain a series of promises which are executed on a 583 * loop. This function returns the next promise from a cyclic contract, 584 * so it can be programmed into the hardware. 585 */ 586static struct sun4i_dma_promise * 587get_next_cyclic_promise(struct sun4i_dma_contract *contract) 588{ 589 struct sun4i_dma_promise *promise; 590 591 promise = list_first_entry_or_null(&contract->demands, 592 struct sun4i_dma_promise, list); 593 if (!promise) { 594 list_splice_init(&contract->completed_demands, 595 &contract->demands); 596 promise = list_first_entry(&contract->demands, 597 struct sun4i_dma_promise, list); 598 } 599 600 return promise; 601} 602 603/* 604 * Free a contract and all its associated promises 605 */ 606static void sun4i_dma_free_contract(struct virt_dma_desc *vd) 607{ 608 struct sun4i_dma_contract *contract = to_sun4i_dma_contract(vd); 609 struct sun4i_dma_promise *promise, *tmp; 610 611 /* Free all the demands and completed demands */ 612 list_for_each_entry_safe(promise, tmp, &contract->demands, list) 613 kfree(promise); 614 615 list_for_each_entry_safe(promise, tmp, &contract->completed_demands, list) 616 kfree(promise); 617 618 kfree(contract); 619} 620 621static struct dma_async_tx_descriptor * 622sun4i_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, 623 dma_addr_t src, size_t len, unsigned long flags) 624{ 625 struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); 626 struct dma_slave_config *sconfig = &vchan->cfg; 627 struct sun4i_dma_promise *promise; 628 struct sun4i_dma_contract *contract; 629 630 contract = generate_dma_contract(); 631 if (!contract) 632 return NULL; 633 634 /* 635 * We can only do the copy to bus aligned addresses, so 636 * choose the best one so we get decent performance. We also 637 * maximize the burst size for this same reason. 638 */ 639 sconfig->src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; 640 sconfig->dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; 641 sconfig->src_maxburst = 8; 642 sconfig->dst_maxburst = 8; 643 644 if (vchan->is_dedicated) 645 promise = generate_ddma_promise(chan, src, dest, len, sconfig); 646 else 647 promise = generate_ndma_promise(chan, src, dest, len, sconfig, 648 DMA_MEM_TO_MEM); 649 650 if (!promise) { 651 kfree(contract); 652 return NULL; 653 } 654 655 /* Configure memcpy mode */ 656 if (vchan->is_dedicated) { 657 promise->cfg |= SUN4I_DMA_CFG_SRC_DRQ_TYPE(SUN4I_DDMA_DRQ_TYPE_SDRAM) | 658 SUN4I_DMA_CFG_DST_DRQ_TYPE(SUN4I_DDMA_DRQ_TYPE_SDRAM); 659 } else { 660 promise->cfg |= SUN4I_DMA_CFG_SRC_DRQ_TYPE(SUN4I_NDMA_DRQ_TYPE_SDRAM) | 661 SUN4I_DMA_CFG_DST_DRQ_TYPE(SUN4I_NDMA_DRQ_TYPE_SDRAM); 662 } 663 664 /* Fill the contract with our only promise */ 665 list_add_tail(&promise->list, &contract->demands); 666 667 /* And add it to the vchan */ 668 return vchan_tx_prep(&vchan->vc, &contract->vd, flags); 669} 670 671static struct dma_async_tx_descriptor * 672sun4i_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf, size_t len, 673 size_t period_len, enum dma_transfer_direction dir, 674 unsigned long flags) 675{ 676 struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); 677 struct dma_slave_config *sconfig = &vchan->cfg; 678 struct sun4i_dma_promise *promise; 679 struct sun4i_dma_contract *contract; 680 dma_addr_t src, dest; 681 u32 endpoints; 682 int nr_periods, offset, plength, i; 683 u8 ram_type, io_mode, linear_mode; 684 685 if (!is_slave_direction(dir)) { 686 dev_err(chan2dev(chan), "Invalid DMA direction\n"); 687 return NULL; 688 } 689 690 contract = generate_dma_contract(); 691 if (!contract) 692 return NULL; 693 694 contract->is_cyclic = 1; 695 696 if (vchan->is_dedicated) { 697 io_mode = SUN4I_DDMA_ADDR_MODE_IO; 698 linear_mode = SUN4I_DDMA_ADDR_MODE_LINEAR; 699 ram_type = SUN4I_DDMA_DRQ_TYPE_SDRAM; 700 } else { 701 io_mode = SUN4I_NDMA_ADDR_MODE_IO; 702 linear_mode = SUN4I_NDMA_ADDR_MODE_LINEAR; 703 ram_type = SUN4I_NDMA_DRQ_TYPE_SDRAM; 704 } 705 706 if (dir == DMA_MEM_TO_DEV) { 707 src = buf; 708 dest = sconfig->dst_addr; 709 endpoints = SUN4I_DMA_CFG_DST_DRQ_TYPE(vchan->endpoint) | 710 SUN4I_DMA_CFG_DST_ADDR_MODE(io_mode) | 711 SUN4I_DMA_CFG_SRC_DRQ_TYPE(ram_type) | 712 SUN4I_DMA_CFG_SRC_ADDR_MODE(linear_mode); 713 } else { 714 src = sconfig->src_addr; 715 dest = buf; 716 endpoints = SUN4I_DMA_CFG_DST_DRQ_TYPE(ram_type) | 717 SUN4I_DMA_CFG_DST_ADDR_MODE(linear_mode) | 718 SUN4I_DMA_CFG_SRC_DRQ_TYPE(vchan->endpoint) | 719 SUN4I_DMA_CFG_SRC_ADDR_MODE(io_mode); 720 } 721 722 /* 723 * We will be using half done interrupts to make two periods 724 * out of a promise, so we need to program the DMA engine less 725 * often 726 */ 727 728 /* 729 * The engine can interrupt on half-transfer, so we can use 730 * this feature to program the engine half as often as if we 731 * didn't use it (keep in mind the hardware doesn't support 732 * linked lists). 733 * 734 * Say you have a set of periods (| marks the start/end, I for 735 * interrupt, P for programming the engine to do a new 736 * transfer), the easy but slow way would be to do 737 * 738 * |---|---|---|---| (periods / promises) 739 * P I,P I,P I,P I 740 * 741 * Using half transfer interrupts you can do 742 * 743 * |-------|-------| (promises as configured on hw) 744 * |---|---|---|---| (periods) 745 * P I I,P I I 746 * 747 * Which requires half the engine programming for the same 748 * functionality. 749 * 750 * This only works if two periods fit in a single promise. That will 751 * always be the case for dedicated DMA, where the hardware has a much 752 * larger maximum transfer size than advertised to clients. 753 */ 754 if (vchan->is_dedicated || period_len <= SUN4I_NDMA_MAX_SEG_SIZE / 2) { 755 period_len *= 2; 756 contract->use_half_int = 1; 757 } 758 759 nr_periods = DIV_ROUND_UP(len, period_len); 760 for (i = 0; i < nr_periods; i++) { 761 /* Calculate the offset in the buffer and the length needed */ 762 offset = i * period_len; 763 plength = min((len - offset), period_len); 764 if (dir == DMA_MEM_TO_DEV) 765 src = buf + offset; 766 else 767 dest = buf + offset; 768 769 /* Make the promise */ 770 if (vchan->is_dedicated) 771 promise = generate_ddma_promise(chan, src, dest, 772 plength, sconfig); 773 else 774 promise = generate_ndma_promise(chan, src, dest, 775 plength, sconfig, dir); 776 777 if (!promise) { 778 /* TODO: should we free everything? */ 779 return NULL; 780 } 781 promise->cfg |= endpoints; 782 783 /* Then add it to the contract */ 784 list_add_tail(&promise->list, &contract->demands); 785 } 786 787 /* And add it to the vchan */ 788 return vchan_tx_prep(&vchan->vc, &contract->vd, flags); 789} 790 791static struct dma_async_tx_descriptor * 792sun4i_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, 793 unsigned int sg_len, enum dma_transfer_direction dir, 794 unsigned long flags, void *context) 795{ 796 struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); 797 struct dma_slave_config *sconfig = &vchan->cfg; 798 struct sun4i_dma_promise *promise; 799 struct sun4i_dma_contract *contract; 800 u8 ram_type, io_mode, linear_mode; 801 struct scatterlist *sg; 802 dma_addr_t srcaddr, dstaddr; 803 u32 endpoints, para; 804 int i; 805 806 if (!sgl) 807 return NULL; 808 809 if (!is_slave_direction(dir)) { 810 dev_err(chan2dev(chan), "Invalid DMA direction\n"); 811 return NULL; 812 } 813 814 contract = generate_dma_contract(); 815 if (!contract) 816 return NULL; 817 818 if (vchan->is_dedicated) { 819 io_mode = SUN4I_DDMA_ADDR_MODE_IO; 820 linear_mode = SUN4I_DDMA_ADDR_MODE_LINEAR; 821 ram_type = SUN4I_DDMA_DRQ_TYPE_SDRAM; 822 } else { 823 io_mode = SUN4I_NDMA_ADDR_MODE_IO; 824 linear_mode = SUN4I_NDMA_ADDR_MODE_LINEAR; 825 ram_type = SUN4I_NDMA_DRQ_TYPE_SDRAM; 826 } 827 828 if (dir == DMA_MEM_TO_DEV) 829 endpoints = SUN4I_DMA_CFG_DST_DRQ_TYPE(vchan->endpoint) | 830 SUN4I_DMA_CFG_DST_ADDR_MODE(io_mode) | 831 SUN4I_DMA_CFG_SRC_DRQ_TYPE(ram_type) | 832 SUN4I_DMA_CFG_SRC_ADDR_MODE(linear_mode); 833 else 834 endpoints = SUN4I_DMA_CFG_DST_DRQ_TYPE(ram_type) | 835 SUN4I_DMA_CFG_DST_ADDR_MODE(linear_mode) | 836 SUN4I_DMA_CFG_SRC_DRQ_TYPE(vchan->endpoint) | 837 SUN4I_DMA_CFG_SRC_ADDR_MODE(io_mode); 838 839 for_each_sg(sgl, sg, sg_len, i) { 840 /* Figure out addresses */ 841 if (dir == DMA_MEM_TO_DEV) { 842 srcaddr = sg_dma_address(sg); 843 dstaddr = sconfig->dst_addr; 844 } else { 845 srcaddr = sconfig->src_addr; 846 dstaddr = sg_dma_address(sg); 847 } 848 849 /* 850 * These are the magic DMA engine timings that keep SPI going. 851 * I haven't seen any interface on DMAEngine to configure 852 * timings, and so far they seem to work for everything we 853 * support, so I've kept them here. I don't know if other 854 * devices need different timings because, as usual, we only 855 * have the "para" bitfield meanings, but no comment on what 856 * the values should be when doing a certain operation :| 857 */ 858 para = SUN4I_DDMA_MAGIC_SPI_PARAMETERS; 859 860 /* And make a suitable promise */ 861 if (vchan->is_dedicated) 862 promise = generate_ddma_promise(chan, srcaddr, dstaddr, 863 sg_dma_len(sg), 864 sconfig); 865 else 866 promise = generate_ndma_promise(chan, srcaddr, dstaddr, 867 sg_dma_len(sg), 868 sconfig, dir); 869 870 if (!promise) 871 return NULL; /* TODO: should we free everything? */ 872 873 promise->cfg |= endpoints; 874 promise->para = para; 875 876 /* Then add it to the contract */ 877 list_add_tail(&promise->list, &contract->demands); 878 } 879 880 /* 881 * Once we've got all the promises ready, add the contract 882 * to the pending list on the vchan 883 */ 884 return vchan_tx_prep(&vchan->vc, &contract->vd, flags); 885} 886 887static int sun4i_dma_terminate_all(struct dma_chan *chan) 888{ 889 struct sun4i_dma_dev *priv = to_sun4i_dma_dev(chan->device); 890 struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); 891 struct sun4i_dma_pchan *pchan = vchan->pchan; 892 LIST_HEAD(head); 893 unsigned long flags; 894 895 spin_lock_irqsave(&vchan->vc.lock, flags); 896 vchan_get_all_descriptors(&vchan->vc, &head); 897 spin_unlock_irqrestore(&vchan->vc.lock, flags); 898 899 /* 900 * Clearing the configuration register will halt the pchan. Interrupts 901 * may still trigger, so don't forget to disable them. 902 */ 903 if (pchan) { 904 if (pchan->is_dedicated) 905 writel(0, pchan->base + SUN4I_DDMA_CFG_REG); 906 else 907 writel(0, pchan->base + SUN4I_NDMA_CFG_REG); 908 set_pchan_interrupt(priv, pchan, 0, 0); 909 release_pchan(priv, pchan); 910 } 911 912 spin_lock_irqsave(&vchan->vc.lock, flags); 913 /* Clear these so the vchan is usable again */ 914 vchan->processing = NULL; 915 vchan->pchan = NULL; 916 spin_unlock_irqrestore(&vchan->vc.lock, flags); 917 918 vchan_dma_desc_free_list(&vchan->vc, &head); 919 920 return 0; 921} 922 923static int sun4i_dma_config(struct dma_chan *chan, 924 struct dma_slave_config *config) 925{ 926 struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); 927 928 memcpy(&vchan->cfg, config, sizeof(*config)); 929 930 return 0; 931} 932 933static struct dma_chan *sun4i_dma_of_xlate(struct of_phandle_args *dma_spec, 934 struct of_dma *ofdma) 935{ 936 struct sun4i_dma_dev *priv = ofdma->of_dma_data; 937 struct sun4i_dma_vchan *vchan; 938 struct dma_chan *chan; 939 u8 is_dedicated = dma_spec->args[0]; 940 u8 endpoint = dma_spec->args[1]; 941 942 /* Check if type is Normal or Dedicated */ 943 if (is_dedicated != 0 && is_dedicated != 1) 944 return NULL; 945 946 /* Make sure the endpoint looks sane */ 947 if ((is_dedicated && endpoint >= SUN4I_DDMA_DRQ_TYPE_LIMIT) || 948 (!is_dedicated && endpoint >= SUN4I_NDMA_DRQ_TYPE_LIMIT)) 949 return NULL; 950 951 chan = dma_get_any_slave_channel(&priv->slave); 952 if (!chan) 953 return NULL; 954 955 /* Assign the endpoint to the vchan */ 956 vchan = to_sun4i_dma_vchan(chan); 957 vchan->is_dedicated = is_dedicated; 958 vchan->endpoint = endpoint; 959 960 return chan; 961} 962 963static enum dma_status sun4i_dma_tx_status(struct dma_chan *chan, 964 dma_cookie_t cookie, 965 struct dma_tx_state *state) 966{ 967 struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); 968 struct sun4i_dma_pchan *pchan = vchan->pchan; 969 struct sun4i_dma_contract *contract; 970 struct sun4i_dma_promise *promise; 971 struct virt_dma_desc *vd; 972 unsigned long flags; 973 enum dma_status ret; 974 size_t bytes = 0; 975 976 ret = dma_cookie_status(chan, cookie, state); 977 if (!state || (ret == DMA_COMPLETE)) 978 return ret; 979 980 spin_lock_irqsave(&vchan->vc.lock, flags); 981 vd = vchan_find_desc(&vchan->vc, cookie); 982 if (!vd) 983 goto exit; 984 contract = to_sun4i_dma_contract(vd); 985 986 list_for_each_entry(promise, &contract->demands, list) 987 bytes += promise->len; 988 989 /* 990 * The hardware is configured to return the remaining byte 991 * quantity. If possible, replace the first listed element's 992 * full size with the actual remaining amount 993 */ 994 promise = list_first_entry_or_null(&contract->demands, 995 struct sun4i_dma_promise, list); 996 if (promise && pchan) { 997 bytes -= promise->len; 998 if (pchan->is_dedicated) 999 bytes += readl(pchan->base + SUN4I_DDMA_BYTE_COUNT_REG); 1000 else 1001 bytes += readl(pchan->base + SUN4I_NDMA_BYTE_COUNT_REG); 1002 } 1003 1004exit: 1005 1006 dma_set_residue(state, bytes); 1007 spin_unlock_irqrestore(&vchan->vc.lock, flags); 1008 1009 return ret; 1010} 1011 1012static void sun4i_dma_issue_pending(struct dma_chan *chan) 1013{ 1014 struct sun4i_dma_dev *priv = to_sun4i_dma_dev(chan->device); 1015 struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); 1016 unsigned long flags; 1017 1018 spin_lock_irqsave(&vchan->vc.lock, flags); 1019 1020 /* 1021 * If there are pending transactions for this vchan, push one of 1022 * them into the engine to get the ball rolling. 1023 */ 1024 if (vchan_issue_pending(&vchan->vc)) 1025 __execute_vchan_pending(priv, vchan); 1026 1027 spin_unlock_irqrestore(&vchan->vc.lock, flags); 1028} 1029 1030static irqreturn_t sun4i_dma_interrupt(int irq, void *dev_id) 1031{ 1032 struct sun4i_dma_dev *priv = dev_id; 1033 struct sun4i_dma_pchan *pchans = priv->pchans, *pchan; 1034 struct sun4i_dma_vchan *vchan; 1035 struct sun4i_dma_contract *contract; 1036 struct sun4i_dma_promise *promise; 1037 unsigned long pendirq, irqs, disableirqs; 1038 int bit, i, free_room, allow_mitigation = 1; 1039 1040 pendirq = readl_relaxed(priv->base + SUN4I_DMA_IRQ_PENDING_STATUS_REG); 1041 1042handle_pending: 1043 1044 disableirqs = 0; 1045 free_room = 0; 1046 1047 for_each_set_bit(bit, &pendirq, 32) { 1048 pchan = &pchans[bit >> 1]; 1049 vchan = pchan->vchan; 1050 if (!vchan) /* a terminated channel may still interrupt */ 1051 continue; 1052 contract = vchan->contract; 1053 1054 /* 1055 * Disable the IRQ and free the pchan if it's an end 1056 * interrupt (odd bit) 1057 */ 1058 if (bit & 1) { 1059 spin_lock(&vchan->vc.lock); 1060 1061 /* 1062 * Move the promise into the completed list now that 1063 * we're done with it 1064 */ 1065 list_move_tail(&vchan->processing->list, 1066 &contract->completed_demands); 1067 1068 /* 1069 * Cyclic DMA transfers are special: 1070 * - There's always something we can dispatch 1071 * - We need to run the callback 1072 * - Latency is very important, as this is used by audio 1073 * We therefore just cycle through the list and dispatch 1074 * whatever we have here, reusing the pchan. There's 1075 * no need to run the thread after this. 1076 * 1077 * For non-cyclic transfers we need to look around, 1078 * so we can program some more work, or notify the 1079 * client that their transfers have been completed. 1080 */ 1081 if (contract->is_cyclic) { 1082 promise = get_next_cyclic_promise(contract); 1083 vchan->processing = promise; 1084 configure_pchan(pchan, promise); 1085 vchan_cyclic_callback(&contract->vd); 1086 } else { 1087 vchan->processing = NULL; 1088 vchan->pchan = NULL; 1089 1090 free_room = 1; 1091 disableirqs |= BIT(bit); 1092 release_pchan(priv, pchan); 1093 } 1094 1095 spin_unlock(&vchan->vc.lock); 1096 } else { 1097 /* Half done interrupt */ 1098 if (contract->is_cyclic) 1099 vchan_cyclic_callback(&contract->vd); 1100 else 1101 disableirqs |= BIT(bit); 1102 } 1103 } 1104 1105 /* Disable the IRQs for events we handled */ 1106 spin_lock(&priv->lock); 1107 irqs = readl_relaxed(priv->base + SUN4I_DMA_IRQ_ENABLE_REG); 1108 writel_relaxed(irqs & ~disableirqs, 1109 priv->base + SUN4I_DMA_IRQ_ENABLE_REG); 1110 spin_unlock(&priv->lock); 1111 1112 /* Writing 1 to the pending field will clear the pending interrupt */ 1113 writel_relaxed(pendirq, priv->base + SUN4I_DMA_IRQ_PENDING_STATUS_REG); 1114 1115 /* 1116 * If a pchan was freed, we may be able to schedule something else, 1117 * so have a look around 1118 */ 1119 if (free_room) { 1120 for (i = 0; i < SUN4I_DMA_NR_MAX_VCHANS; i++) { 1121 vchan = &priv->vchans[i]; 1122 spin_lock(&vchan->vc.lock); 1123 __execute_vchan_pending(priv, vchan); 1124 spin_unlock(&vchan->vc.lock); 1125 } 1126 } 1127 1128 /* 1129 * Handle newer interrupts if some showed up, but only do it once 1130 * to avoid a too long a loop 1131 */ 1132 if (allow_mitigation) { 1133 pendirq = readl_relaxed(priv->base + 1134 SUN4I_DMA_IRQ_PENDING_STATUS_REG); 1135 if (pendirq) { 1136 allow_mitigation = 0; 1137 goto handle_pending; 1138 } 1139 } 1140 1141 return IRQ_HANDLED; 1142} 1143 1144static int sun4i_dma_probe(struct platform_device *pdev) 1145{ 1146 struct sun4i_dma_dev *priv; 1147 int i, j, ret; 1148 1149 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); 1150 if (!priv) 1151 return -ENOMEM; 1152 1153 priv->base = devm_platform_ioremap_resource(pdev, 0); 1154 if (IS_ERR(priv->base)) 1155 return PTR_ERR(priv->base); 1156 1157 priv->irq = platform_get_irq(pdev, 0); 1158 if (priv->irq < 0) 1159 return priv->irq; 1160 1161 priv->clk = devm_clk_get(&pdev->dev, NULL); 1162 if (IS_ERR(priv->clk)) { 1163 dev_err(&pdev->dev, "No clock specified\n"); 1164 return PTR_ERR(priv->clk); 1165 } 1166 1167 platform_set_drvdata(pdev, priv); 1168 spin_lock_init(&priv->lock); 1169 1170 dma_set_max_seg_size(&pdev->dev, SUN4I_DMA_MAX_SEG_SIZE); 1171 1172 dma_cap_zero(priv->slave.cap_mask); 1173 dma_cap_set(DMA_PRIVATE, priv->slave.cap_mask); 1174 dma_cap_set(DMA_MEMCPY, priv->slave.cap_mask); 1175 dma_cap_set(DMA_CYCLIC, priv->slave.cap_mask); 1176 dma_cap_set(DMA_SLAVE, priv->slave.cap_mask); 1177 1178 INIT_LIST_HEAD(&priv->slave.channels); 1179 priv->slave.device_free_chan_resources = sun4i_dma_free_chan_resources; 1180 priv->slave.device_tx_status = sun4i_dma_tx_status; 1181 priv->slave.device_issue_pending = sun4i_dma_issue_pending; 1182 priv->slave.device_prep_slave_sg = sun4i_dma_prep_slave_sg; 1183 priv->slave.device_prep_dma_memcpy = sun4i_dma_prep_dma_memcpy; 1184 priv->slave.device_prep_dma_cyclic = sun4i_dma_prep_dma_cyclic; 1185 priv->slave.device_config = sun4i_dma_config; 1186 priv->slave.device_terminate_all = sun4i_dma_terminate_all; 1187 priv->slave.copy_align = 2; 1188 priv->slave.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | 1189 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | 1190 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); 1191 priv->slave.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | 1192 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | 1193 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); 1194 priv->slave.directions = BIT(DMA_DEV_TO_MEM) | 1195 BIT(DMA_MEM_TO_DEV); 1196 priv->slave.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; 1197 1198 priv->slave.dev = &pdev->dev; 1199 1200 priv->pchans = devm_kcalloc(&pdev->dev, SUN4I_DMA_NR_MAX_CHANNELS, 1201 sizeof(struct sun4i_dma_pchan), GFP_KERNEL); 1202 priv->vchans = devm_kcalloc(&pdev->dev, SUN4I_DMA_NR_MAX_VCHANS, 1203 sizeof(struct sun4i_dma_vchan), GFP_KERNEL); 1204 if (!priv->vchans || !priv->pchans) 1205 return -ENOMEM; 1206 1207 /* 1208 * [0..SUN4I_NDMA_NR_MAX_CHANNELS) are normal pchans, and 1209 * [SUN4I_NDMA_NR_MAX_CHANNELS..SUN4I_DMA_NR_MAX_CHANNELS) are 1210 * dedicated ones 1211 */ 1212 for (i = 0; i < SUN4I_NDMA_NR_MAX_CHANNELS; i++) 1213 priv->pchans[i].base = priv->base + 1214 SUN4I_NDMA_CHANNEL_REG_BASE(i); 1215 1216 for (j = 0; i < SUN4I_DMA_NR_MAX_CHANNELS; i++, j++) { 1217 priv->pchans[i].base = priv->base + 1218 SUN4I_DDMA_CHANNEL_REG_BASE(j); 1219 priv->pchans[i].is_dedicated = 1; 1220 } 1221 1222 for (i = 0; i < SUN4I_DMA_NR_MAX_VCHANS; i++) { 1223 struct sun4i_dma_vchan *vchan = &priv->vchans[i]; 1224 1225 spin_lock_init(&vchan->vc.lock); 1226 vchan->vc.desc_free = sun4i_dma_free_contract; 1227 vchan_init(&vchan->vc, &priv->slave); 1228 } 1229 1230 ret = clk_prepare_enable(priv->clk); 1231 if (ret) { 1232 dev_err(&pdev->dev, "Couldn't enable the clock\n"); 1233 return ret; 1234 } 1235 1236 /* 1237 * Make sure the IRQs are all disabled and accounted for. The bootloader 1238 * likes to leave these dirty 1239 */ 1240 writel(0, priv->base + SUN4I_DMA_IRQ_ENABLE_REG); 1241 writel(0xFFFFFFFF, priv->base + SUN4I_DMA_IRQ_PENDING_STATUS_REG); 1242 1243 ret = devm_request_irq(&pdev->dev, priv->irq, sun4i_dma_interrupt, 1244 0, dev_name(&pdev->dev), priv); 1245 if (ret) { 1246 dev_err(&pdev->dev, "Cannot request IRQ\n"); 1247 goto err_clk_disable; 1248 } 1249 1250 ret = dma_async_device_register(&priv->slave); 1251 if (ret) { 1252 dev_warn(&pdev->dev, "Failed to register DMA engine device\n"); 1253 goto err_clk_disable; 1254 } 1255 1256 ret = of_dma_controller_register(pdev->dev.of_node, sun4i_dma_of_xlate, 1257 priv); 1258 if (ret) { 1259 dev_err(&pdev->dev, "of_dma_controller_register failed\n"); 1260 goto err_dma_unregister; 1261 } 1262 1263 dev_dbg(&pdev->dev, "Successfully probed SUN4I_DMA\n"); 1264 1265 return 0; 1266 1267err_dma_unregister: 1268 dma_async_device_unregister(&priv->slave); 1269err_clk_disable: 1270 clk_disable_unprepare(priv->clk); 1271 return ret; 1272} 1273 1274static void sun4i_dma_remove(struct platform_device *pdev) 1275{ 1276 struct sun4i_dma_dev *priv = platform_get_drvdata(pdev); 1277 1278 /* Disable IRQ so no more work is scheduled */ 1279 disable_irq(priv->irq); 1280 1281 of_dma_controller_free(pdev->dev.of_node); 1282 dma_async_device_unregister(&priv->slave); 1283 1284 clk_disable_unprepare(priv->clk); 1285} 1286 1287static const struct of_device_id sun4i_dma_match[] = { 1288 { .compatible = "allwinner,sun4i-a10-dma" }, 1289 { /* sentinel */ }, 1290}; 1291MODULE_DEVICE_TABLE(of, sun4i_dma_match); 1292 1293static struct platform_driver sun4i_dma_driver = { 1294 .probe = sun4i_dma_probe, 1295 .remove_new = sun4i_dma_remove, 1296 .driver = { 1297 .name = "sun4i-dma", 1298 .of_match_table = sun4i_dma_match, 1299 }, 1300}; 1301 1302module_platform_driver(sun4i_dma_driver); 1303 1304MODULE_DESCRIPTION("Allwinner A10 Dedicated DMA Controller Driver"); 1305MODULE_AUTHOR("Emilio L��pez <emilio@elopez.com.ar>"); 1306MODULE_LICENSE("GPL"); 1307