1// SPDX-License-Identifier: GPL-2.0-or-later
2 /******************************************************************************
3 * Nuvoton TPM I2C Device Driver Interface for WPCT301/NPCT501/NPCT6XX,
4 * based on the TCG TPM Interface Spec version 1.2.
5 * Specifications at www.trustedcomputinggroup.org
6 *
7 * Copyright (C) 2011, Nuvoton Technology Corporation.
8 *  Dan Morav <dan.morav@nuvoton.com>
9 * Copyright (C) 2013, Obsidian Research Corp.
10 *  Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
11 *
12 * Nuvoton contact information: APC.Support@nuvoton.com
13 *****************************************************************************/
14
15#include <linux/init.h>
16#include <linux/module.h>
17#include <linux/moduleparam.h>
18#include <linux/slab.h>
19#include <linux/interrupt.h>
20#include <linux/wait.h>
21#include <linux/i2c.h>
22#include <linux/of.h>
23#include <linux/property.h>
24#include "tpm.h"
25
26/* I2C interface offsets */
27#define TPM_STS			0x00
28#define TPM_BURST_COUNT		0x01
29#define TPM_DATA_FIFO_W		0x20
30#define TPM_DATA_FIFO_R		0x40
31#define TPM_VID_DID_RID		0x60
32#define TPM_I2C_RETRIES		5
33/*
34 * I2C bus device maximum buffer size w/o counting I2C address or command
35 * i.e. max size required for I2C write is 34 = addr, command, 32 bytes data
36 */
37#define TPM_I2C_MAX_BUF_SIZE           32
38#define TPM_I2C_RETRY_COUNT            32
39#define TPM_I2C_BUS_DELAY              1000      	/* usec */
40#define TPM_I2C_RETRY_DELAY_SHORT      (2 * 1000)	/* usec */
41#define TPM_I2C_RETRY_DELAY_LONG       (10 * 1000) 	/* usec */
42#define TPM_I2C_DELAY_RANGE            300		/* usec */
43
44#define OF_IS_TPM2 ((void *)1)
45#define I2C_IS_TPM2 1
46
47struct priv_data {
48	int irq;
49	unsigned int intrs;
50	wait_queue_head_t read_queue;
51};
52
53static s32 i2c_nuvoton_read_buf(struct i2c_client *client, u8 offset, u8 size,
54				u8 *data)
55{
56	s32 status;
57
58	status = i2c_smbus_read_i2c_block_data(client, offset, size, data);
59	dev_dbg(&client->dev,
60		"%s(offset=%u size=%u data=%*ph) -> sts=%d\n", __func__,
61		offset, size, (int)size, data, status);
62	return status;
63}
64
65static s32 i2c_nuvoton_write_buf(struct i2c_client *client, u8 offset, u8 size,
66				 u8 *data)
67{
68	s32 status;
69
70	status = i2c_smbus_write_i2c_block_data(client, offset, size, data);
71	dev_dbg(&client->dev,
72		"%s(offset=%u size=%u data=%*ph) -> sts=%d\n", __func__,
73		offset, size, (int)size, data, status);
74	return status;
75}
76
77#define TPM_STS_VALID          0x80
78#define TPM_STS_COMMAND_READY  0x40
79#define TPM_STS_GO             0x20
80#define TPM_STS_DATA_AVAIL     0x10
81#define TPM_STS_EXPECT         0x08
82#define TPM_STS_RESPONSE_RETRY 0x02
83#define TPM_STS_ERR_VAL        0x07    /* bit2...bit0 reads always 0 */
84
85#define TPM_I2C_SHORT_TIMEOUT  750     /* ms */
86#define TPM_I2C_LONG_TIMEOUT   2000    /* 2 sec */
87
88/* read TPM_STS register */
89static u8 i2c_nuvoton_read_status(struct tpm_chip *chip)
90{
91	struct i2c_client *client = to_i2c_client(chip->dev.parent);
92	s32 status;
93	u8 data;
94
95	status = i2c_nuvoton_read_buf(client, TPM_STS, 1, &data);
96	if (status <= 0) {
97		dev_err(&chip->dev, "%s() error return %d\n", __func__,
98			status);
99		data = TPM_STS_ERR_VAL;
100	}
101
102	return data;
103}
104
105/* write byte to TPM_STS register */
106static s32 i2c_nuvoton_write_status(struct i2c_client *client, u8 data)
107{
108	s32 status;
109	int i;
110
111	/* this causes the current command to be aborted */
112	for (i = 0, status = -1; i < TPM_I2C_RETRY_COUNT && status < 0; i++) {
113		status = i2c_nuvoton_write_buf(client, TPM_STS, 1, &data);
114		if (status < 0)
115			usleep_range(TPM_I2C_BUS_DELAY, TPM_I2C_BUS_DELAY
116				     + TPM_I2C_DELAY_RANGE);
117	}
118	return status;
119}
120
121/* write commandReady to TPM_STS register */
122static void i2c_nuvoton_ready(struct tpm_chip *chip)
123{
124	struct i2c_client *client = to_i2c_client(chip->dev.parent);
125	s32 status;
126
127	/* this causes the current command to be aborted */
128	status = i2c_nuvoton_write_status(client, TPM_STS_COMMAND_READY);
129	if (status < 0)
130		dev_err(&chip->dev,
131			"%s() fail to write TPM_STS.commandReady\n", __func__);
132}
133
134/* read burstCount field from TPM_STS register
135 * return -1 on fail to read */
136static int i2c_nuvoton_get_burstcount(struct i2c_client *client,
137				      struct tpm_chip *chip)
138{
139	unsigned long stop = jiffies + chip->timeout_d;
140	s32 status;
141	int burst_count = -1;
142	u8 data;
143
144	/* wait for burstcount to be non-zero */
145	do {
146		/* in I2C burstCount is 1 byte */
147		status = i2c_nuvoton_read_buf(client, TPM_BURST_COUNT, 1,
148					      &data);
149		if (status > 0 && data > 0) {
150			burst_count = min_t(u8, TPM_I2C_MAX_BUF_SIZE, data);
151			break;
152		}
153		usleep_range(TPM_I2C_BUS_DELAY, TPM_I2C_BUS_DELAY
154			     + TPM_I2C_DELAY_RANGE);
155	} while (time_before(jiffies, stop));
156
157	return burst_count;
158}
159
160/*
161 * WPCT301/NPCT501/NPCT6XX SINT# supports only dataAvail
162 * any call to this function which is not waiting for dataAvail will
163 * set queue to NULL to avoid waiting for interrupt
164 */
165static bool i2c_nuvoton_check_status(struct tpm_chip *chip, u8 mask, u8 value)
166{
167	u8 status = i2c_nuvoton_read_status(chip);
168	return (status != TPM_STS_ERR_VAL) && ((status & mask) == value);
169}
170
171static int i2c_nuvoton_wait_for_stat(struct tpm_chip *chip, u8 mask, u8 value,
172				     u32 timeout, wait_queue_head_t *queue)
173{
174	if ((chip->flags & TPM_CHIP_FLAG_IRQ) && queue) {
175		s32 rc;
176		struct priv_data *priv = dev_get_drvdata(&chip->dev);
177		unsigned int cur_intrs = priv->intrs;
178
179		enable_irq(priv->irq);
180		rc = wait_event_interruptible_timeout(*queue,
181						      cur_intrs != priv->intrs,
182						      timeout);
183		if (rc > 0)
184			return 0;
185		/* At this point we know that the SINT pin is asserted, so we
186		 * do not need to do i2c_nuvoton_check_status */
187	} else {
188		unsigned long ten_msec, stop;
189		bool status_valid;
190
191		/* check current status */
192		status_valid = i2c_nuvoton_check_status(chip, mask, value);
193		if (status_valid)
194			return 0;
195
196		/* use polling to wait for the event */
197		ten_msec = jiffies + usecs_to_jiffies(TPM_I2C_RETRY_DELAY_LONG);
198		stop = jiffies + timeout;
199		do {
200			if (time_before(jiffies, ten_msec))
201				usleep_range(TPM_I2C_RETRY_DELAY_SHORT,
202					     TPM_I2C_RETRY_DELAY_SHORT
203					     + TPM_I2C_DELAY_RANGE);
204			else
205				usleep_range(TPM_I2C_RETRY_DELAY_LONG,
206					     TPM_I2C_RETRY_DELAY_LONG
207					     + TPM_I2C_DELAY_RANGE);
208			status_valid = i2c_nuvoton_check_status(chip, mask,
209								value);
210			if (status_valid)
211				return 0;
212		} while (time_before(jiffies, stop));
213	}
214	dev_err(&chip->dev, "%s(%02x, %02x) -> timeout\n", __func__, mask,
215		value);
216	return -ETIMEDOUT;
217}
218
219/* wait for dataAvail field to be set in the TPM_STS register */
220static int i2c_nuvoton_wait_for_data_avail(struct tpm_chip *chip, u32 timeout,
221					   wait_queue_head_t *queue)
222{
223	return i2c_nuvoton_wait_for_stat(chip,
224					 TPM_STS_DATA_AVAIL | TPM_STS_VALID,
225					 TPM_STS_DATA_AVAIL | TPM_STS_VALID,
226					 timeout, queue);
227}
228
229/* Read @count bytes into @buf from TPM_RD_FIFO register */
230static int i2c_nuvoton_recv_data(struct i2c_client *client,
231				 struct tpm_chip *chip, u8 *buf, size_t count)
232{
233	struct priv_data *priv = dev_get_drvdata(&chip->dev);
234	s32 rc;
235	int burst_count, bytes2read, size = 0;
236
237	while (size < count &&
238	       i2c_nuvoton_wait_for_data_avail(chip,
239					       chip->timeout_c,
240					       &priv->read_queue) == 0) {
241		burst_count = i2c_nuvoton_get_burstcount(client, chip);
242		if (burst_count < 0) {
243			dev_err(&chip->dev,
244				"%s() fail to read burstCount=%d\n", __func__,
245				burst_count);
246			return -EIO;
247		}
248		bytes2read = min_t(size_t, burst_count, count - size);
249		rc = i2c_nuvoton_read_buf(client, TPM_DATA_FIFO_R,
250					  bytes2read, &buf[size]);
251		if (rc < 0) {
252			dev_err(&chip->dev,
253				"%s() fail on i2c_nuvoton_read_buf()=%d\n",
254				__func__, rc);
255			return -EIO;
256		}
257		dev_dbg(&chip->dev, "%s(%d):", __func__, bytes2read);
258		size += bytes2read;
259	}
260
261	return size;
262}
263
264/* Read TPM command results */
265static int i2c_nuvoton_recv(struct tpm_chip *chip, u8 *buf, size_t count)
266{
267	struct priv_data *priv = dev_get_drvdata(&chip->dev);
268	struct device *dev = chip->dev.parent;
269	struct i2c_client *client = to_i2c_client(dev);
270	s32 rc;
271	int status;
272	int burst_count;
273	int retries;
274	int size = 0;
275	u32 expected;
276
277	if (count < TPM_HEADER_SIZE) {
278		i2c_nuvoton_ready(chip);    /* return to idle */
279		dev_err(dev, "%s() count < header size\n", __func__);
280		return -EIO;
281	}
282	for (retries = 0; retries < TPM_I2C_RETRIES; retries++) {
283		if (retries > 0) {
284			/* if this is not the first trial, set responseRetry */
285			i2c_nuvoton_write_status(client,
286						 TPM_STS_RESPONSE_RETRY);
287		}
288		/*
289		 * read first available (> 10 bytes), including:
290		 * tag, paramsize, and result
291		 */
292		status = i2c_nuvoton_wait_for_data_avail(
293			chip, chip->timeout_c, &priv->read_queue);
294		if (status != 0) {
295			dev_err(dev, "%s() timeout on dataAvail\n", __func__);
296			size = -ETIMEDOUT;
297			continue;
298		}
299		burst_count = i2c_nuvoton_get_burstcount(client, chip);
300		if (burst_count < 0) {
301			dev_err(dev, "%s() fail to get burstCount\n", __func__);
302			size = -EIO;
303			continue;
304		}
305		size = i2c_nuvoton_recv_data(client, chip, buf,
306					     burst_count);
307		if (size < TPM_HEADER_SIZE) {
308			dev_err(dev, "%s() fail to read header\n", __func__);
309			size = -EIO;
310			continue;
311		}
312		/*
313		 * convert number of expected bytes field from big endian 32 bit
314		 * to machine native
315		 */
316		expected = be32_to_cpu(*(__be32 *) (buf + 2));
317		if (expected > count || expected < size) {
318			dev_err(dev, "%s() expected > count\n", __func__);
319			size = -EIO;
320			continue;
321		}
322		rc = i2c_nuvoton_recv_data(client, chip, &buf[size],
323					   expected - size);
324		size += rc;
325		if (rc < 0 || size < expected) {
326			dev_err(dev, "%s() fail to read remainder of result\n",
327				__func__);
328			size = -EIO;
329			continue;
330		}
331		if (i2c_nuvoton_wait_for_stat(
332			    chip, TPM_STS_VALID | TPM_STS_DATA_AVAIL,
333			    TPM_STS_VALID, chip->timeout_c,
334			    NULL)) {
335			dev_err(dev, "%s() error left over data\n", __func__);
336			size = -ETIMEDOUT;
337			continue;
338		}
339		break;
340	}
341	i2c_nuvoton_ready(chip);
342	dev_dbg(&chip->dev, "%s() -> %d\n", __func__, size);
343	return size;
344}
345
346/*
347 * Send TPM command.
348 *
349 * If interrupts are used (signaled by an irq set in the vendor structure)
350 * tpm.c can skip polling for the data to be available as the interrupt is
351 * waited for here
352 */
353static int i2c_nuvoton_send(struct tpm_chip *chip, u8 *buf, size_t len)
354{
355	struct priv_data *priv = dev_get_drvdata(&chip->dev);
356	struct device *dev = chip->dev.parent;
357	struct i2c_client *client = to_i2c_client(dev);
358	u32 ordinal;
359	unsigned long duration;
360	size_t count = 0;
361	int burst_count, bytes2write, retries, rc = -EIO;
362
363	for (retries = 0; retries < TPM_RETRY; retries++) {
364		i2c_nuvoton_ready(chip);
365		if (i2c_nuvoton_wait_for_stat(chip, TPM_STS_COMMAND_READY,
366					      TPM_STS_COMMAND_READY,
367					      chip->timeout_b, NULL)) {
368			dev_err(dev, "%s() timeout on commandReady\n",
369				__func__);
370			rc = -EIO;
371			continue;
372		}
373		rc = 0;
374		while (count < len - 1) {
375			burst_count = i2c_nuvoton_get_burstcount(client,
376								 chip);
377			if (burst_count < 0) {
378				dev_err(dev, "%s() fail get burstCount\n",
379					__func__);
380				rc = -EIO;
381				break;
382			}
383			bytes2write = min_t(size_t, burst_count,
384					    len - 1 - count);
385			rc = i2c_nuvoton_write_buf(client, TPM_DATA_FIFO_W,
386						   bytes2write, &buf[count]);
387			if (rc < 0) {
388				dev_err(dev, "%s() fail i2cWriteBuf\n",
389					__func__);
390				break;
391			}
392			dev_dbg(dev, "%s(%d):", __func__, bytes2write);
393			count += bytes2write;
394			rc = i2c_nuvoton_wait_for_stat(chip,
395						       TPM_STS_VALID |
396						       TPM_STS_EXPECT,
397						       TPM_STS_VALID |
398						       TPM_STS_EXPECT,
399						       chip->timeout_c,
400						       NULL);
401			if (rc < 0) {
402				dev_err(dev, "%s() timeout on Expect\n",
403					__func__);
404				rc = -ETIMEDOUT;
405				break;
406			}
407		}
408		if (rc < 0)
409			continue;
410
411		/* write last byte */
412		rc = i2c_nuvoton_write_buf(client, TPM_DATA_FIFO_W, 1,
413					   &buf[count]);
414		if (rc < 0) {
415			dev_err(dev, "%s() fail to write last byte\n",
416				__func__);
417			rc = -EIO;
418			continue;
419		}
420		dev_dbg(dev, "%s(last): %02x", __func__, buf[count]);
421		rc = i2c_nuvoton_wait_for_stat(chip,
422					       TPM_STS_VALID | TPM_STS_EXPECT,
423					       TPM_STS_VALID,
424					       chip->timeout_c, NULL);
425		if (rc) {
426			dev_err(dev, "%s() timeout on Expect to clear\n",
427				__func__);
428			rc = -ETIMEDOUT;
429			continue;
430		}
431		break;
432	}
433	if (rc < 0) {
434		/* retries == TPM_RETRY */
435		i2c_nuvoton_ready(chip);
436		return rc;
437	}
438	/* execute the TPM command */
439	rc = i2c_nuvoton_write_status(client, TPM_STS_GO);
440	if (rc < 0) {
441		dev_err(dev, "%s() fail to write Go\n", __func__);
442		i2c_nuvoton_ready(chip);
443		return rc;
444	}
445	ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
446	duration = tpm_calc_ordinal_duration(chip, ordinal);
447
448	rc = i2c_nuvoton_wait_for_data_avail(chip, duration, &priv->read_queue);
449	if (rc) {
450		dev_err(dev, "%s() timeout command duration %ld\n",
451			__func__, duration);
452		i2c_nuvoton_ready(chip);
453		return rc;
454	}
455
456	dev_dbg(dev, "%s() -> %zd\n", __func__, len);
457	return 0;
458}
459
460static bool i2c_nuvoton_req_canceled(struct tpm_chip *chip, u8 status)
461{
462	return (status == TPM_STS_COMMAND_READY);
463}
464
465static const struct tpm_class_ops tpm_i2c = {
466	.flags = TPM_OPS_AUTO_STARTUP,
467	.status = i2c_nuvoton_read_status,
468	.recv = i2c_nuvoton_recv,
469	.send = i2c_nuvoton_send,
470	.cancel = i2c_nuvoton_ready,
471	.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
472	.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
473	.req_canceled = i2c_nuvoton_req_canceled,
474};
475
476/* The only purpose for the handler is to signal to any waiting threads that
477 * the interrupt is currently being asserted. The driver does not do any
478 * processing triggered by interrupts, and the chip provides no way to mask at
479 * the source (plus that would be slow over I2C). Run the IRQ as a one-shot,
480 * this means it cannot be shared. */
481static irqreturn_t i2c_nuvoton_int_handler(int dummy, void *dev_id)
482{
483	struct tpm_chip *chip = dev_id;
484	struct priv_data *priv = dev_get_drvdata(&chip->dev);
485
486	priv->intrs++;
487	wake_up(&priv->read_queue);
488	disable_irq_nosync(priv->irq);
489	return IRQ_HANDLED;
490}
491
492static int get_vid(struct i2c_client *client, u32 *res)
493{
494	static const u8 vid_did_rid_value[] = { 0x50, 0x10, 0xfe };
495	u32 temp;
496	s32 rc;
497
498	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
499		return -ENODEV;
500	rc = i2c_nuvoton_read_buf(client, TPM_VID_DID_RID, 4, (u8 *)&temp);
501	if (rc < 0)
502		return rc;
503
504	/* check WPCT301 values - ignore RID */
505	if (memcmp(&temp, vid_did_rid_value, sizeof(vid_did_rid_value))) {
506		/*
507		 * f/w rev 2.81 has an issue where the VID_DID_RID is not
508		 * reporting the right value. so give it another chance at
509		 * offset 0x20 (FIFO_W).
510		 */
511		rc = i2c_nuvoton_read_buf(client, TPM_DATA_FIFO_W, 4,
512					  (u8 *) (&temp));
513		if (rc < 0)
514			return rc;
515
516		/* check WPCT301 values - ignore RID */
517		if (memcmp(&temp, vid_did_rid_value,
518			   sizeof(vid_did_rid_value)))
519			return -ENODEV;
520	}
521
522	*res = temp;
523	return 0;
524}
525
526static int i2c_nuvoton_probe(struct i2c_client *client)
527{
528	int rc;
529	struct tpm_chip *chip;
530	struct device *dev = &client->dev;
531	struct priv_data *priv;
532	u32 vid = 0;
533
534	rc = get_vid(client, &vid);
535	if (rc)
536		return rc;
537
538	dev_info(dev, "VID: %04X DID: %02X RID: %02X\n", (u16) vid,
539		 (u8) (vid >> 16), (u8) (vid >> 24));
540
541	chip = tpmm_chip_alloc(dev, &tpm_i2c);
542	if (IS_ERR(chip))
543		return PTR_ERR(chip);
544
545	priv = devm_kzalloc(dev, sizeof(struct priv_data), GFP_KERNEL);
546	if (!priv)
547		return -ENOMEM;
548
549	if (i2c_get_match_data(client))
550		chip->flags |= TPM_CHIP_FLAG_TPM2;
551
552	init_waitqueue_head(&priv->read_queue);
553
554	/* Default timeouts */
555	chip->timeout_a = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
556	chip->timeout_b = msecs_to_jiffies(TPM_I2C_LONG_TIMEOUT);
557	chip->timeout_c = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
558	chip->timeout_d = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
559
560	dev_set_drvdata(&chip->dev, priv);
561
562	/*
563	 * I2C intfcaps (interrupt capabilitieis) in the chip are hard coded to:
564	 *   TPM_INTF_INT_LEVEL_LOW | TPM_INTF_DATA_AVAIL_INT
565	 * The IRQ should be set in the i2c_board_info (which is done
566	 * automatically in of_i2c_register_devices, for device tree users */
567	priv->irq = client->irq;
568	if (client->irq) {
569		dev_dbg(dev, "%s() priv->irq\n", __func__);
570		rc = devm_request_irq(dev, client->irq,
571				      i2c_nuvoton_int_handler,
572				      IRQF_TRIGGER_LOW,
573				      dev_name(&chip->dev),
574				      chip);
575		if (rc) {
576			dev_err(dev, "%s() Unable to request irq: %d for use\n",
577				__func__, priv->irq);
578			priv->irq = 0;
579		} else {
580			chip->flags |= TPM_CHIP_FLAG_IRQ;
581			/* Clear any pending interrupt */
582			i2c_nuvoton_ready(chip);
583			/* - wait for TPM_STS==0xA0 (stsValid, commandReady) */
584			rc = i2c_nuvoton_wait_for_stat(chip,
585						       TPM_STS_COMMAND_READY,
586						       TPM_STS_COMMAND_READY,
587						       chip->timeout_b,
588						       NULL);
589			if (rc == 0) {
590				/*
591				 * TIS is in ready state
592				 * write dummy byte to enter reception state
593				 * TPM_DATA_FIFO_W <- rc (0)
594				 */
595				rc = i2c_nuvoton_write_buf(client,
596							   TPM_DATA_FIFO_W,
597							   1, (u8 *) (&rc));
598				if (rc < 0)
599					return rc;
600				/* TPM_STS <- 0x40 (commandReady) */
601				i2c_nuvoton_ready(chip);
602			} else {
603				/*
604				 * timeout_b reached - command was
605				 * aborted. TIS should now be in idle state -
606				 * only TPM_STS_VALID should be set
607				 */
608				if (i2c_nuvoton_read_status(chip) !=
609				    TPM_STS_VALID)
610					return -EIO;
611			}
612		}
613	}
614
615	return tpm_chip_register(chip);
616}
617
618static void i2c_nuvoton_remove(struct i2c_client *client)
619{
620	struct tpm_chip *chip = i2c_get_clientdata(client);
621
622	tpm_chip_unregister(chip);
623}
624
625static const struct i2c_device_id i2c_nuvoton_id[] = {
626	{"tpm_i2c_nuvoton"},
627	{"tpm2_i2c_nuvoton", .driver_data = I2C_IS_TPM2},
628	{}
629};
630MODULE_DEVICE_TABLE(i2c, i2c_nuvoton_id);
631
632#ifdef CONFIG_OF
633static const struct of_device_id i2c_nuvoton_of_match[] = {
634	{.compatible = "nuvoton,npct501"},
635	{.compatible = "winbond,wpct301"},
636	{.compatible = "nuvoton,npct601", .data = OF_IS_TPM2},
637	{},
638};
639MODULE_DEVICE_TABLE(of, i2c_nuvoton_of_match);
640#endif
641
642static SIMPLE_DEV_PM_OPS(i2c_nuvoton_pm_ops, tpm_pm_suspend, tpm_pm_resume);
643
644static struct i2c_driver i2c_nuvoton_driver = {
645	.id_table = i2c_nuvoton_id,
646	.probe = i2c_nuvoton_probe,
647	.remove = i2c_nuvoton_remove,
648	.driver = {
649		.name = "tpm_i2c_nuvoton",
650		.pm = &i2c_nuvoton_pm_ops,
651		.of_match_table = of_match_ptr(i2c_nuvoton_of_match),
652	},
653};
654
655module_i2c_driver(i2c_nuvoton_driver);
656
657MODULE_AUTHOR("Dan Morav <dan.morav@nuvoton.com>");
658MODULE_DESCRIPTION("Nuvoton TPM I2C Driver");
659MODULE_LICENSE("GPL");
660