1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * ipmi_bt_sm.c 4 * 5 * The state machine for an Open IPMI BT sub-driver under ipmi_si.c, part 6 * of the driver architecture at http://sourceforge.net/projects/openipmi 7 * 8 * Author: Rocky Craig <first.last@hp.com> 9 */ 10 11#define DEBUG /* So dev_dbg() is always available. */ 12 13#include <linux/kernel.h> /* For printk. */ 14#include <linux/string.h> 15#include <linux/module.h> 16#include <linux/moduleparam.h> 17#include <linux/ipmi_msgdefs.h> /* for completion codes */ 18#include "ipmi_si_sm.h" 19 20#define BT_DEBUG_OFF 0 /* Used in production */ 21#define BT_DEBUG_ENABLE 1 /* Generic messages */ 22#define BT_DEBUG_MSG 2 /* Prints all request/response buffers */ 23#define BT_DEBUG_STATES 4 /* Verbose look at state changes */ 24/* 25 * BT_DEBUG_OFF must be zero to correspond to the default uninitialized 26 * value 27 */ 28 29static int bt_debug; /* 0 == BT_DEBUG_OFF */ 30 31module_param(bt_debug, int, 0644); 32MODULE_PARM_DESC(bt_debug, "debug bitmask, 1=enable, 2=messages, 4=states"); 33 34/* 35 * Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds, 36 * and 64 byte buffers. However, one HP implementation wants 255 bytes of 37 * buffer (with a documented message of 160 bytes) so go for the max. 38 * Since the Open IPMI architecture is single-message oriented at this 39 * stage, the queue depth of BT is of no concern. 40 */ 41 42#define BT_NORMAL_TIMEOUT 5 /* seconds */ 43#define BT_NORMAL_RETRY_LIMIT 2 44#define BT_RESET_DELAY 6 /* seconds after warm reset */ 45 46/* 47 * States are written in chronological order and usually cover 48 * multiple rows of the state table discussion in the IPMI spec. 49 */ 50 51enum bt_states { 52 BT_STATE_IDLE = 0, /* Order is critical in this list */ 53 BT_STATE_XACTION_START, 54 BT_STATE_WRITE_BYTES, 55 BT_STATE_WRITE_CONSUME, 56 BT_STATE_READ_WAIT, 57 BT_STATE_CLEAR_B2H, 58 BT_STATE_READ_BYTES, 59 BT_STATE_RESET1, /* These must come last */ 60 BT_STATE_RESET2, 61 BT_STATE_RESET3, 62 BT_STATE_RESTART, 63 BT_STATE_PRINTME, 64 BT_STATE_LONG_BUSY /* BT doesn't get hosed :-) */ 65}; 66 67/* 68 * Macros seen at the end of state "case" blocks. They help with legibility 69 * and debugging. 70 */ 71 72#define BT_STATE_CHANGE(X, Y) { bt->state = X; return Y; } 73 74#define BT_SI_SM_RETURN(Y) { last_printed = BT_STATE_PRINTME; return Y; } 75 76struct si_sm_data { 77 enum bt_states state; 78 unsigned char seq; /* BT sequence number */ 79 struct si_sm_io *io; 80 unsigned char write_data[IPMI_MAX_MSG_LENGTH + 2]; /* +2 for memcpy */ 81 int write_count; 82 unsigned char read_data[IPMI_MAX_MSG_LENGTH + 2]; /* +2 for memcpy */ 83 int read_count; 84 int truncated; 85 long timeout; /* microseconds countdown */ 86 int error_retries; /* end of "common" fields */ 87 int nonzero_status; /* hung BMCs stay all 0 */ 88 enum bt_states complete; /* to divert the state machine */ 89 long BT_CAP_req2rsp; 90 int BT_CAP_retries; /* Recommended retries */ 91}; 92 93#define BT_CLR_WR_PTR 0x01 /* See IPMI 1.5 table 11.6.4 */ 94#define BT_CLR_RD_PTR 0x02 95#define BT_H2B_ATN 0x04 96#define BT_B2H_ATN 0x08 97#define BT_SMS_ATN 0x10 98#define BT_OEM0 0x20 99#define BT_H_BUSY 0x40 100#define BT_B_BUSY 0x80 101 102/* 103 * Some bits are toggled on each write: write once to set it, once 104 * more to clear it; writing a zero does nothing. To absolutely 105 * clear it, check its state and write if set. This avoids the "get 106 * current then use as mask" scheme to modify one bit. Note that the 107 * variable "bt" is hardcoded into these macros. 108 */ 109 110#define BT_STATUS bt->io->inputb(bt->io, 0) 111#define BT_CONTROL(x) bt->io->outputb(bt->io, 0, x) 112 113#define BMC2HOST bt->io->inputb(bt->io, 1) 114#define HOST2BMC(x) bt->io->outputb(bt->io, 1, x) 115 116#define BT_INTMASK_R bt->io->inputb(bt->io, 2) 117#define BT_INTMASK_W(x) bt->io->outputb(bt->io, 2, x) 118 119/* 120 * Convenience routines for debugging. These are not multi-open safe! 121 * Note the macros have hardcoded variables in them. 122 */ 123 124static char *state2txt(unsigned char state) 125{ 126 switch (state) { 127 case BT_STATE_IDLE: return("IDLE"); 128 case BT_STATE_XACTION_START: return("XACTION"); 129 case BT_STATE_WRITE_BYTES: return("WR_BYTES"); 130 case BT_STATE_WRITE_CONSUME: return("WR_CONSUME"); 131 case BT_STATE_READ_WAIT: return("RD_WAIT"); 132 case BT_STATE_CLEAR_B2H: return("CLEAR_B2H"); 133 case BT_STATE_READ_BYTES: return("RD_BYTES"); 134 case BT_STATE_RESET1: return("RESET1"); 135 case BT_STATE_RESET2: return("RESET2"); 136 case BT_STATE_RESET3: return("RESET3"); 137 case BT_STATE_RESTART: return("RESTART"); 138 case BT_STATE_LONG_BUSY: return("LONG_BUSY"); 139 } 140 return("BAD STATE"); 141} 142#define STATE2TXT state2txt(bt->state) 143 144static char *status2txt(unsigned char status) 145{ 146 /* 147 * This cannot be called by two threads at the same time and 148 * the buffer is always consumed immediately, so the static is 149 * safe to use. 150 */ 151 static char buf[40]; 152 153 strcpy(buf, "[ "); 154 if (status & BT_B_BUSY) 155 strcat(buf, "B_BUSY "); 156 if (status & BT_H_BUSY) 157 strcat(buf, "H_BUSY "); 158 if (status & BT_OEM0) 159 strcat(buf, "OEM0 "); 160 if (status & BT_SMS_ATN) 161 strcat(buf, "SMS "); 162 if (status & BT_B2H_ATN) 163 strcat(buf, "B2H "); 164 if (status & BT_H2B_ATN) 165 strcat(buf, "H2B "); 166 strcat(buf, "]"); 167 return buf; 168} 169#define STATUS2TXT status2txt(status) 170 171/* called externally at insmod time, and internally on cleanup */ 172 173static unsigned int bt_init_data(struct si_sm_data *bt, struct si_sm_io *io) 174{ 175 memset(bt, 0, sizeof(struct si_sm_data)); 176 if (bt->io != io) { 177 /* external: one-time only things */ 178 bt->io = io; 179 bt->seq = 0; 180 } 181 bt->state = BT_STATE_IDLE; /* start here */ 182 bt->complete = BT_STATE_IDLE; /* end here */ 183 bt->BT_CAP_req2rsp = BT_NORMAL_TIMEOUT * USEC_PER_SEC; 184 bt->BT_CAP_retries = BT_NORMAL_RETRY_LIMIT; 185 return 3; /* We claim 3 bytes of space; ought to check SPMI table */ 186} 187 188/* Jam a completion code (probably an error) into a response */ 189 190static void force_result(struct si_sm_data *bt, unsigned char completion_code) 191{ 192 bt->read_data[0] = 4; /* # following bytes */ 193 bt->read_data[1] = bt->write_data[1] | 4; /* Odd NetFn/LUN */ 194 bt->read_data[2] = bt->write_data[2]; /* seq (ignored) */ 195 bt->read_data[3] = bt->write_data[3]; /* Command */ 196 bt->read_data[4] = completion_code; 197 bt->read_count = 5; 198} 199 200/* The upper state machine starts here */ 201 202static int bt_start_transaction(struct si_sm_data *bt, 203 unsigned char *data, 204 unsigned int size) 205{ 206 unsigned int i; 207 208 if (size < 2) 209 return IPMI_REQ_LEN_INVALID_ERR; 210 if (size > IPMI_MAX_MSG_LENGTH) 211 return IPMI_REQ_LEN_EXCEEDED_ERR; 212 213 if (bt->state == BT_STATE_LONG_BUSY) 214 return IPMI_NODE_BUSY_ERR; 215 216 if (bt->state != BT_STATE_IDLE) { 217 dev_warn(bt->io->dev, "BT in invalid state %d\n", bt->state); 218 return IPMI_NOT_IN_MY_STATE_ERR; 219 } 220 221 if (bt_debug & BT_DEBUG_MSG) { 222 dev_dbg(bt->io->dev, "+++++++++++++++++ New command\n"); 223 dev_dbg(bt->io->dev, "NetFn/LUN CMD [%d data]:", size - 2); 224 for (i = 0; i < size; i ++) 225 pr_cont(" %02x", data[i]); 226 pr_cont("\n"); 227 } 228 bt->write_data[0] = size + 1; /* all data plus seq byte */ 229 bt->write_data[1] = *data; /* NetFn/LUN */ 230 bt->write_data[2] = bt->seq++; 231 memcpy(bt->write_data + 3, data + 1, size - 1); 232 bt->write_count = size + 2; 233 bt->error_retries = 0; 234 bt->nonzero_status = 0; 235 bt->truncated = 0; 236 bt->state = BT_STATE_XACTION_START; 237 bt->timeout = bt->BT_CAP_req2rsp; 238 force_result(bt, IPMI_ERR_UNSPECIFIED); 239 return 0; 240} 241 242/* 243 * After the upper state machine has been told SI_SM_TRANSACTION_COMPLETE 244 * it calls this. Strip out the length and seq bytes. 245 */ 246 247static int bt_get_result(struct si_sm_data *bt, 248 unsigned char *data, 249 unsigned int length) 250{ 251 int i, msg_len; 252 253 msg_len = bt->read_count - 2; /* account for length & seq */ 254 if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH) { 255 force_result(bt, IPMI_ERR_UNSPECIFIED); 256 msg_len = 3; 257 } 258 data[0] = bt->read_data[1]; 259 data[1] = bt->read_data[3]; 260 if (length < msg_len || bt->truncated) { 261 data[2] = IPMI_ERR_MSG_TRUNCATED; 262 msg_len = 3; 263 } else 264 memcpy(data + 2, bt->read_data + 4, msg_len - 2); 265 266 if (bt_debug & BT_DEBUG_MSG) { 267 dev_dbg(bt->io->dev, "result %d bytes:", msg_len); 268 for (i = 0; i < msg_len; i++) 269 pr_cont(" %02x", data[i]); 270 pr_cont("\n"); 271 } 272 return msg_len; 273} 274 275/* This bit's functionality is optional */ 276#define BT_BMC_HWRST 0x80 277 278static void reset_flags(struct si_sm_data *bt) 279{ 280 if (bt_debug) 281 dev_dbg(bt->io->dev, "flag reset %s\n", status2txt(BT_STATUS)); 282 if (BT_STATUS & BT_H_BUSY) 283 BT_CONTROL(BT_H_BUSY); /* force clear */ 284 BT_CONTROL(BT_CLR_WR_PTR); /* always reset */ 285 BT_CONTROL(BT_SMS_ATN); /* always clear */ 286 BT_INTMASK_W(BT_BMC_HWRST); 287} 288 289/* 290 * Get rid of an unwanted/stale response. This should only be needed for 291 * BMCs that support multiple outstanding requests. 292 */ 293 294static void drain_BMC2HOST(struct si_sm_data *bt) 295{ 296 int i, size; 297 298 if (!(BT_STATUS & BT_B2H_ATN)) /* Not signalling a response */ 299 return; 300 301 BT_CONTROL(BT_H_BUSY); /* now set */ 302 BT_CONTROL(BT_B2H_ATN); /* always clear */ 303 BT_STATUS; /* pause */ 304 BT_CONTROL(BT_B2H_ATN); /* some BMCs are stubborn */ 305 BT_CONTROL(BT_CLR_RD_PTR); /* always reset */ 306 if (bt_debug) 307 dev_dbg(bt->io->dev, "stale response %s; ", 308 status2txt(BT_STATUS)); 309 size = BMC2HOST; 310 for (i = 0; i < size ; i++) 311 BMC2HOST; 312 BT_CONTROL(BT_H_BUSY); /* now clear */ 313 if (bt_debug) 314 pr_cont("drained %d bytes\n", size + 1); 315} 316 317static inline void write_all_bytes(struct si_sm_data *bt) 318{ 319 int i; 320 321 if (bt_debug & BT_DEBUG_MSG) { 322 dev_dbg(bt->io->dev, "write %d bytes seq=0x%02X", 323 bt->write_count, bt->seq); 324 for (i = 0; i < bt->write_count; i++) 325 pr_cont(" %02x", bt->write_data[i]); 326 pr_cont("\n"); 327 } 328 for (i = 0; i < bt->write_count; i++) 329 HOST2BMC(bt->write_data[i]); 330} 331 332static inline int read_all_bytes(struct si_sm_data *bt) 333{ 334 unsigned int i; 335 336 /* 337 * length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode. 338 * Keep layout of first four bytes aligned with write_data[] 339 */ 340 341 bt->read_data[0] = BMC2HOST; 342 bt->read_count = bt->read_data[0]; 343 344 if (bt->read_count < 4 || bt->read_count >= IPMI_MAX_MSG_LENGTH) { 345 if (bt_debug & BT_DEBUG_MSG) 346 dev_dbg(bt->io->dev, 347 "bad raw rsp len=%d\n", bt->read_count); 348 bt->truncated = 1; 349 return 1; /* let next XACTION START clean it up */ 350 } 351 for (i = 1; i <= bt->read_count; i++) 352 bt->read_data[i] = BMC2HOST; 353 bt->read_count++; /* Account internally for length byte */ 354 355 if (bt_debug & BT_DEBUG_MSG) { 356 int max = bt->read_count; 357 358 dev_dbg(bt->io->dev, 359 "got %d bytes seq=0x%02X", max, bt->read_data[2]); 360 if (max > 16) 361 max = 16; 362 for (i = 0; i < max; i++) 363 pr_cont(" %02x", bt->read_data[i]); 364 pr_cont("%s\n", bt->read_count == max ? "" : " ..."); 365 } 366 367 /* per the spec, the (NetFn[1], Seq[2], Cmd[3]) tuples must match */ 368 if ((bt->read_data[3] == bt->write_data[3]) && 369 (bt->read_data[2] == bt->write_data[2]) && 370 ((bt->read_data[1] & 0xF8) == (bt->write_data[1] & 0xF8))) 371 return 1; 372 373 if (bt_debug & BT_DEBUG_MSG) 374 dev_dbg(bt->io->dev, 375 "IPMI BT: bad packet: want 0x(%02X, %02X, %02X) got (%02X, %02X, %02X)\n", 376 bt->write_data[1] | 0x04, bt->write_data[2], 377 bt->write_data[3], 378 bt->read_data[1], bt->read_data[2], bt->read_data[3]); 379 return 0; 380} 381 382/* Restart if retries are left, or return an error completion code */ 383 384static enum si_sm_result error_recovery(struct si_sm_data *bt, 385 unsigned char status, 386 unsigned char cCode) 387{ 388 char *reason; 389 390 bt->timeout = bt->BT_CAP_req2rsp; 391 392 switch (cCode) { 393 case IPMI_TIMEOUT_ERR: 394 reason = "timeout"; 395 break; 396 default: 397 reason = "internal error"; 398 break; 399 } 400 401 dev_warn(bt->io->dev, "IPMI BT: %s in %s %s ", /* open-ended line */ 402 reason, STATE2TXT, STATUS2TXT); 403 404 /* 405 * Per the IPMI spec, retries are based on the sequence number 406 * known only to this module, so manage a restart here. 407 */ 408 (bt->error_retries)++; 409 if (bt->error_retries < bt->BT_CAP_retries) { 410 pr_cont("%d retries left\n", 411 bt->BT_CAP_retries - bt->error_retries); 412 bt->state = BT_STATE_RESTART; 413 return SI_SM_CALL_WITHOUT_DELAY; 414 } 415 416 dev_warn(bt->io->dev, "failed %d retries, sending error response\n", 417 bt->BT_CAP_retries); 418 if (!bt->nonzero_status) 419 dev_err(bt->io->dev, "stuck, try power cycle\n"); 420 421 /* this is most likely during insmod */ 422 else if (bt->seq <= (unsigned char)(bt->BT_CAP_retries & 0xFF)) { 423 dev_warn(bt->io->dev, "BT reset (takes 5 secs)\n"); 424 bt->state = BT_STATE_RESET1; 425 return SI_SM_CALL_WITHOUT_DELAY; 426 } 427 428 /* 429 * Concoct a useful error message, set up the next state, and 430 * be done with this sequence. 431 */ 432 433 bt->state = BT_STATE_IDLE; 434 switch (cCode) { 435 case IPMI_TIMEOUT_ERR: 436 if (status & BT_B_BUSY) { 437 cCode = IPMI_NODE_BUSY_ERR; 438 bt->state = BT_STATE_LONG_BUSY; 439 } 440 break; 441 default: 442 break; 443 } 444 force_result(bt, cCode); 445 return SI_SM_TRANSACTION_COMPLETE; 446} 447 448/* Check status and (usually) take action and change this state machine. */ 449 450static enum si_sm_result bt_event(struct si_sm_data *bt, long time) 451{ 452 unsigned char status; 453 static enum bt_states last_printed = BT_STATE_PRINTME; 454 int i; 455 456 status = BT_STATUS; 457 bt->nonzero_status |= status; 458 if ((bt_debug & BT_DEBUG_STATES) && (bt->state != last_printed)) { 459 dev_dbg(bt->io->dev, "BT: %s %s TO=%ld - %ld\n", 460 STATE2TXT, 461 STATUS2TXT, 462 bt->timeout, 463 time); 464 last_printed = bt->state; 465 } 466 467 /* 468 * Commands that time out may still (eventually) provide a response. 469 * This stale response will get in the way of a new response so remove 470 * it if possible (hopefully during IDLE). Even if it comes up later 471 * it will be rejected by its (now-forgotten) seq number. 472 */ 473 474 if ((bt->state < BT_STATE_WRITE_BYTES) && (status & BT_B2H_ATN)) { 475 drain_BMC2HOST(bt); 476 BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); 477 } 478 479 if ((bt->state != BT_STATE_IDLE) && 480 (bt->state < BT_STATE_PRINTME)) { 481 /* check timeout */ 482 bt->timeout -= time; 483 if ((bt->timeout < 0) && (bt->state < BT_STATE_RESET1)) 484 return error_recovery(bt, 485 status, 486 IPMI_TIMEOUT_ERR); 487 } 488 489 switch (bt->state) { 490 491 /* 492 * Idle state first checks for asynchronous messages from another 493 * channel, then does some opportunistic housekeeping. 494 */ 495 496 case BT_STATE_IDLE: 497 if (status & BT_SMS_ATN) { 498 BT_CONTROL(BT_SMS_ATN); /* clear it */ 499 return SI_SM_ATTN; 500 } 501 502 if (status & BT_H_BUSY) /* clear a leftover H_BUSY */ 503 BT_CONTROL(BT_H_BUSY); 504 505 BT_SI_SM_RETURN(SI_SM_IDLE); 506 507 case BT_STATE_XACTION_START: 508 if (status & (BT_B_BUSY | BT_H2B_ATN)) 509 BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); 510 if (BT_STATUS & BT_H_BUSY) 511 BT_CONTROL(BT_H_BUSY); /* force clear */ 512 BT_STATE_CHANGE(BT_STATE_WRITE_BYTES, 513 SI_SM_CALL_WITHOUT_DELAY); 514 515 case BT_STATE_WRITE_BYTES: 516 if (status & BT_H_BUSY) 517 BT_CONTROL(BT_H_BUSY); /* clear */ 518 BT_CONTROL(BT_CLR_WR_PTR); 519 write_all_bytes(bt); 520 BT_CONTROL(BT_H2B_ATN); /* can clear too fast to catch */ 521 BT_STATE_CHANGE(BT_STATE_WRITE_CONSUME, 522 SI_SM_CALL_WITHOUT_DELAY); 523 524 case BT_STATE_WRITE_CONSUME: 525 if (status & (BT_B_BUSY | BT_H2B_ATN)) 526 BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); 527 BT_STATE_CHANGE(BT_STATE_READ_WAIT, 528 SI_SM_CALL_WITHOUT_DELAY); 529 530 /* Spinning hard can suppress B2H_ATN and force a timeout */ 531 532 case BT_STATE_READ_WAIT: 533 if (!(status & BT_B2H_ATN)) 534 BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); 535 BT_CONTROL(BT_H_BUSY); /* set */ 536 537 /* 538 * Uncached, ordered writes should just proceed serially but 539 * some BMCs don't clear B2H_ATN with one hit. Fast-path a 540 * workaround without too much penalty to the general case. 541 */ 542 543 BT_CONTROL(BT_B2H_ATN); /* clear it to ACK the BMC */ 544 BT_STATE_CHANGE(BT_STATE_CLEAR_B2H, 545 SI_SM_CALL_WITHOUT_DELAY); 546 547 case BT_STATE_CLEAR_B2H: 548 if (status & BT_B2H_ATN) { 549 /* keep hitting it */ 550 BT_CONTROL(BT_B2H_ATN); 551 BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); 552 } 553 BT_STATE_CHANGE(BT_STATE_READ_BYTES, 554 SI_SM_CALL_WITHOUT_DELAY); 555 556 case BT_STATE_READ_BYTES: 557 if (!(status & BT_H_BUSY)) 558 /* check in case of retry */ 559 BT_CONTROL(BT_H_BUSY); 560 BT_CONTROL(BT_CLR_RD_PTR); /* start of BMC2HOST buffer */ 561 i = read_all_bytes(bt); /* true == packet seq match */ 562 BT_CONTROL(BT_H_BUSY); /* NOW clear */ 563 if (!i) /* Not my message */ 564 BT_STATE_CHANGE(BT_STATE_READ_WAIT, 565 SI_SM_CALL_WITHOUT_DELAY); 566 bt->state = bt->complete; 567 return bt->state == BT_STATE_IDLE ? /* where to next? */ 568 SI_SM_TRANSACTION_COMPLETE : /* normal */ 569 SI_SM_CALL_WITHOUT_DELAY; /* Startup magic */ 570 571 case BT_STATE_LONG_BUSY: /* For example: after FW update */ 572 if (!(status & BT_B_BUSY)) { 573 reset_flags(bt); /* next state is now IDLE */ 574 bt_init_data(bt, bt->io); 575 } 576 return SI_SM_CALL_WITH_DELAY; /* No repeat printing */ 577 578 case BT_STATE_RESET1: 579 reset_flags(bt); 580 drain_BMC2HOST(bt); 581 BT_STATE_CHANGE(BT_STATE_RESET2, 582 SI_SM_CALL_WITH_DELAY); 583 584 case BT_STATE_RESET2: /* Send a soft reset */ 585 BT_CONTROL(BT_CLR_WR_PTR); 586 HOST2BMC(3); /* number of bytes following */ 587 HOST2BMC(0x18); /* NetFn/LUN == Application, LUN 0 */ 588 HOST2BMC(42); /* Sequence number */ 589 HOST2BMC(3); /* Cmd == Soft reset */ 590 BT_CONTROL(BT_H2B_ATN); 591 bt->timeout = BT_RESET_DELAY * USEC_PER_SEC; 592 BT_STATE_CHANGE(BT_STATE_RESET3, 593 SI_SM_CALL_WITH_DELAY); 594 595 case BT_STATE_RESET3: /* Hold off everything for a bit */ 596 if (bt->timeout > 0) 597 return SI_SM_CALL_WITH_DELAY; 598 drain_BMC2HOST(bt); 599 BT_STATE_CHANGE(BT_STATE_RESTART, 600 SI_SM_CALL_WITH_DELAY); 601 602 case BT_STATE_RESTART: /* don't reset retries or seq! */ 603 bt->read_count = 0; 604 bt->nonzero_status = 0; 605 bt->timeout = bt->BT_CAP_req2rsp; 606 BT_STATE_CHANGE(BT_STATE_XACTION_START, 607 SI_SM_CALL_WITH_DELAY); 608 609 default: /* should never occur */ 610 return error_recovery(bt, 611 status, 612 IPMI_ERR_UNSPECIFIED); 613 } 614 return SI_SM_CALL_WITH_DELAY; 615} 616 617static int bt_detect(struct si_sm_data *bt) 618{ 619 unsigned char GetBT_CAP[] = { 0x18, 0x36 }; 620 unsigned char BT_CAP[8]; 621 enum si_sm_result smi_result; 622 int rv; 623 624 /* 625 * It's impossible for the BT status and interrupt registers to be 626 * all 1's, (assuming a properly functioning, self-initialized BMC) 627 * but that's what you get from reading a bogus address, so we 628 * test that first. The calling routine uses negative logic. 629 */ 630 631 if ((BT_STATUS == 0xFF) && (BT_INTMASK_R == 0xFF)) 632 return 1; 633 reset_flags(bt); 634 635 /* 636 * Try getting the BT capabilities here. 637 */ 638 rv = bt_start_transaction(bt, GetBT_CAP, sizeof(GetBT_CAP)); 639 if (rv) { 640 dev_warn(bt->io->dev, 641 "Can't start capabilities transaction: %d\n", rv); 642 goto out_no_bt_cap; 643 } 644 645 smi_result = SI_SM_CALL_WITHOUT_DELAY; 646 for (;;) { 647 if (smi_result == SI_SM_CALL_WITH_DELAY || 648 smi_result == SI_SM_CALL_WITH_TICK_DELAY) { 649 schedule_timeout_uninterruptible(1); 650 smi_result = bt_event(bt, jiffies_to_usecs(1)); 651 } else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) { 652 smi_result = bt_event(bt, 0); 653 } else 654 break; 655 } 656 657 rv = bt_get_result(bt, BT_CAP, sizeof(BT_CAP)); 658 bt_init_data(bt, bt->io); 659 if (rv < 8) { 660 dev_warn(bt->io->dev, "bt cap response too short: %d\n", rv); 661 goto out_no_bt_cap; 662 } 663 664 if (BT_CAP[2]) { 665 dev_warn(bt->io->dev, "Error fetching bt cap: %x\n", BT_CAP[2]); 666out_no_bt_cap: 667 dev_warn(bt->io->dev, "using default values\n"); 668 } else { 669 bt->BT_CAP_req2rsp = BT_CAP[6] * USEC_PER_SEC; 670 bt->BT_CAP_retries = BT_CAP[7]; 671 } 672 673 dev_info(bt->io->dev, "req2rsp=%ld secs retries=%d\n", 674 bt->BT_CAP_req2rsp / USEC_PER_SEC, bt->BT_CAP_retries); 675 676 return 0; 677} 678 679static void bt_cleanup(struct si_sm_data *bt) 680{ 681} 682 683static int bt_size(void) 684{ 685 return sizeof(struct si_sm_data); 686} 687 688const struct si_sm_handlers bt_smi_handlers = { 689 .init_data = bt_init_data, 690 .start_transaction = bt_start_transaction, 691 .get_result = bt_get_result, 692 .event = bt_event, 693 .detect = bt_detect, 694 .cleanup = bt_cleanup, 695 .size = bt_size, 696}; 697