1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright (c) 2008-2009 Atheros Communications Inc. 4 */ 5 6 7#include <linux/module.h> 8#include <linux/kernel.h> 9#include <linux/init.h> 10#include <linux/slab.h> 11#include <linux/types.h> 12#include <linux/errno.h> 13#include <linux/firmware.h> 14#include <linux/usb.h> 15#include <asm/unaligned.h> 16#include <net/bluetooth/bluetooth.h> 17 18#define VERSION "1.0" 19#define ATH3K_FIRMWARE "ath3k-1.fw" 20 21#define ATH3K_DNLOAD 0x01 22#define ATH3K_GETSTATE 0x05 23#define ATH3K_SET_NORMAL_MODE 0x07 24#define ATH3K_GETVERSION 0x09 25#define USB_REG_SWITCH_VID_PID 0x0a 26 27#define ATH3K_MODE_MASK 0x3F 28#define ATH3K_NORMAL_MODE 0x0E 29 30#define ATH3K_PATCH_UPDATE 0x80 31#define ATH3K_SYSCFG_UPDATE 0x40 32 33#define ATH3K_XTAL_FREQ_26M 0x00 34#define ATH3K_XTAL_FREQ_40M 0x01 35#define ATH3K_XTAL_FREQ_19P2 0x02 36#define ATH3K_NAME_LEN 0xFF 37 38struct ath3k_version { 39 __le32 rom_version; 40 __le32 build_version; 41 __le32 ram_version; 42 __u8 ref_clock; 43 __u8 reserved[7]; 44} __packed; 45 46static const struct usb_device_id ath3k_table[] = { 47 /* Atheros AR3011 */ 48 { USB_DEVICE(0x0CF3, 0x3000) }, 49 50 /* Atheros AR3011 with sflash firmware*/ 51 { USB_DEVICE(0x0489, 0xE027) }, 52 { USB_DEVICE(0x0489, 0xE03D) }, 53 { USB_DEVICE(0x04F2, 0xAFF1) }, 54 { USB_DEVICE(0x0930, 0x0215) }, 55 { USB_DEVICE(0x0CF3, 0x3002) }, 56 { USB_DEVICE(0x0CF3, 0xE019) }, 57 { USB_DEVICE(0x13d3, 0x3304) }, 58 59 /* Atheros AR9285 Malbec with sflash firmware */ 60 { USB_DEVICE(0x03F0, 0x311D) }, 61 62 /* Atheros AR3012 with sflash firmware*/ 63 { USB_DEVICE(0x0489, 0xe04d) }, 64 { USB_DEVICE(0x0489, 0xe04e) }, 65 { USB_DEVICE(0x0489, 0xe057) }, 66 { USB_DEVICE(0x0489, 0xe056) }, 67 { USB_DEVICE(0x0489, 0xe05f) }, 68 { USB_DEVICE(0x0489, 0xe076) }, 69 { USB_DEVICE(0x0489, 0xe078) }, 70 { USB_DEVICE(0x0489, 0xe095) }, 71 { USB_DEVICE(0x04c5, 0x1330) }, 72 { USB_DEVICE(0x04CA, 0x3004) }, 73 { USB_DEVICE(0x04CA, 0x3005) }, 74 { USB_DEVICE(0x04CA, 0x3006) }, 75 { USB_DEVICE(0x04CA, 0x3007) }, 76 { USB_DEVICE(0x04CA, 0x3008) }, 77 { USB_DEVICE(0x04CA, 0x300b) }, 78 { USB_DEVICE(0x04CA, 0x300d) }, 79 { USB_DEVICE(0x04CA, 0x300f) }, 80 { USB_DEVICE(0x04CA, 0x3010) }, 81 { USB_DEVICE(0x04CA, 0x3014) }, 82 { USB_DEVICE(0x04CA, 0x3018) }, 83 { USB_DEVICE(0x0930, 0x0219) }, 84 { USB_DEVICE(0x0930, 0x021c) }, 85 { USB_DEVICE(0x0930, 0x0220) }, 86 { USB_DEVICE(0x0930, 0x0227) }, 87 { USB_DEVICE(0x0b05, 0x17d0) }, 88 { USB_DEVICE(0x0CF3, 0x0036) }, 89 { USB_DEVICE(0x0CF3, 0x3004) }, 90 { USB_DEVICE(0x0CF3, 0x3008) }, 91 { USB_DEVICE(0x0CF3, 0x311D) }, 92 { USB_DEVICE(0x0CF3, 0x311E) }, 93 { USB_DEVICE(0x0CF3, 0x311F) }, 94 { USB_DEVICE(0x0cf3, 0x3121) }, 95 { USB_DEVICE(0x0CF3, 0x817a) }, 96 { USB_DEVICE(0x0CF3, 0x817b) }, 97 { USB_DEVICE(0x0cf3, 0xe003) }, 98 { USB_DEVICE(0x0CF3, 0xE004) }, 99 { USB_DEVICE(0x0CF3, 0xE005) }, 100 { USB_DEVICE(0x0CF3, 0xE006) }, 101 { USB_DEVICE(0x13d3, 0x3362) }, 102 { USB_DEVICE(0x13d3, 0x3375) }, 103 { USB_DEVICE(0x13d3, 0x3393) }, 104 { USB_DEVICE(0x13d3, 0x3395) }, 105 { USB_DEVICE(0x13d3, 0x3402) }, 106 { USB_DEVICE(0x13d3, 0x3408) }, 107 { USB_DEVICE(0x13d3, 0x3423) }, 108 { USB_DEVICE(0x13d3, 0x3432) }, 109 { USB_DEVICE(0x13d3, 0x3472) }, 110 { USB_DEVICE(0x13d3, 0x3474) }, 111 { USB_DEVICE(0x13d3, 0x3487) }, 112 { USB_DEVICE(0x13d3, 0x3490) }, 113 114 /* Atheros AR5BBU12 with sflash firmware */ 115 { USB_DEVICE(0x0489, 0xE02C) }, 116 117 /* Atheros AR5BBU22 with sflash firmware */ 118 { USB_DEVICE(0x0489, 0xE036) }, 119 { USB_DEVICE(0x0489, 0xE03C) }, 120 121 { } /* Terminating entry */ 122}; 123 124MODULE_DEVICE_TABLE(usb, ath3k_table); 125 126#define BTUSB_ATH3012 0x80 127/* This table is to load patch and sysconfig files 128 * for AR3012 129 */ 130static const struct usb_device_id ath3k_blist_tbl[] = { 131 132 /* Atheros AR3012 with sflash firmware*/ 133 { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, 134 { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 }, 135 { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, 136 { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, 137 { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 }, 138 { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 }, 139 { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 }, 140 { USB_DEVICE(0x0489, 0xe095), .driver_info = BTUSB_ATH3012 }, 141 { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, 142 { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 }, 143 { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, 144 { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, 145 { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 }, 146 { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, 147 { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 }, 148 { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 }, 149 { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 }, 150 { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 }, 151 { USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 }, 152 { USB_DEVICE(0x04ca, 0x3018), .driver_info = BTUSB_ATH3012 }, 153 { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, 154 { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 }, 155 { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 }, 156 { USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 }, 157 { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 }, 158 { USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 }, 159 { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, 160 { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 }, 161 { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 }, 162 { USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 }, 163 { USB_DEVICE(0x0cf3, 0x311F), .driver_info = BTUSB_ATH3012 }, 164 { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 }, 165 { USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 }, 166 { USB_DEVICE(0x0CF3, 0x817b), .driver_info = BTUSB_ATH3012 }, 167 { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, 168 { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, 169 { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 }, 170 { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, 171 { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, 172 { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, 173 { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, 174 { USB_DEVICE(0x13d3, 0x3395), .driver_info = BTUSB_ATH3012 }, 175 { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, 176 { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, 177 { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 }, 178 { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, 179 { USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 }, 180 { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 }, 181 { USB_DEVICE(0x13d3, 0x3487), .driver_info = BTUSB_ATH3012 }, 182 { USB_DEVICE(0x13d3, 0x3490), .driver_info = BTUSB_ATH3012 }, 183 184 /* Atheros AR5BBU22 with sflash firmware */ 185 { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 }, 186 { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, 187 188 { } /* Terminating entry */ 189}; 190 191static inline void ath3k_log_failed_loading(int err, int len, int size, 192 int count) 193{ 194 BT_ERR("Firmware loading err = %d, len = %d, size = %d, count = %d", 195 err, len, size, count); 196} 197 198#define USB_REQ_DFU_DNLOAD 1 199#define BULK_SIZE 4096 200#define FW_HDR_SIZE 20 201#define TIMEGAP_USEC_MIN 50 202#define TIMEGAP_USEC_MAX 100 203 204static int ath3k_load_firmware(struct usb_device *udev, 205 const struct firmware *firmware) 206{ 207 u8 *send_buf; 208 int len = 0; 209 int err, pipe, size, sent = 0; 210 int count = firmware->size; 211 212 BT_DBG("udev %p", udev); 213 214 send_buf = kmalloc(BULK_SIZE, GFP_KERNEL); 215 if (!send_buf) { 216 BT_ERR("Can't allocate memory chunk for firmware"); 217 return -ENOMEM; 218 } 219 220 err = usb_control_msg_send(udev, 0, USB_REQ_DFU_DNLOAD, USB_TYPE_VENDOR, 221 0, 0, firmware->data, FW_HDR_SIZE, 222 USB_CTRL_SET_TIMEOUT, GFP_KERNEL); 223 if (err) { 224 BT_ERR("Can't change to loading configuration err"); 225 goto error; 226 } 227 sent += FW_HDR_SIZE; 228 count -= FW_HDR_SIZE; 229 230 pipe = usb_sndbulkpipe(udev, 0x02); 231 232 while (count) { 233 /* workaround the compatibility issue with xHCI controller*/ 234 usleep_range(TIMEGAP_USEC_MIN, TIMEGAP_USEC_MAX); 235 236 size = min_t(uint, count, BULK_SIZE); 237 memcpy(send_buf, firmware->data + sent, size); 238 239 err = usb_bulk_msg(udev, pipe, send_buf, size, 240 &len, 3000); 241 242 if (err || (len != size)) { 243 ath3k_log_failed_loading(err, len, size, count); 244 goto error; 245 } 246 247 sent += size; 248 count -= size; 249 } 250 251error: 252 kfree(send_buf); 253 return err; 254} 255 256static int ath3k_get_state(struct usb_device *udev, unsigned char *state) 257{ 258 return usb_control_msg_recv(udev, 0, ATH3K_GETSTATE, 259 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, 260 state, 1, USB_CTRL_SET_TIMEOUT, 261 GFP_KERNEL); 262} 263 264static int ath3k_get_version(struct usb_device *udev, 265 struct ath3k_version *version) 266{ 267 return usb_control_msg_recv(udev, 0, ATH3K_GETVERSION, 268 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, 269 version, sizeof(*version), USB_CTRL_SET_TIMEOUT, 270 GFP_KERNEL); 271} 272 273static int ath3k_load_fwfile(struct usb_device *udev, 274 const struct firmware *firmware) 275{ 276 u8 *send_buf; 277 int len = 0; 278 int err, pipe, size, count, sent = 0; 279 int ret; 280 281 count = firmware->size; 282 283 send_buf = kmalloc(BULK_SIZE, GFP_KERNEL); 284 if (!send_buf) { 285 BT_ERR("Can't allocate memory chunk for firmware"); 286 return -ENOMEM; 287 } 288 289 size = min_t(uint, count, FW_HDR_SIZE); 290 291 ret = usb_control_msg_send(udev, 0, ATH3K_DNLOAD, USB_TYPE_VENDOR, 0, 0, 292 firmware->data, size, USB_CTRL_SET_TIMEOUT, 293 GFP_KERNEL); 294 if (ret) { 295 BT_ERR("Can't change to loading configuration err"); 296 kfree(send_buf); 297 return ret; 298 } 299 300 sent += size; 301 count -= size; 302 303 pipe = usb_sndbulkpipe(udev, 0x02); 304 305 while (count) { 306 /* workaround the compatibility issue with xHCI controller*/ 307 usleep_range(TIMEGAP_USEC_MIN, TIMEGAP_USEC_MAX); 308 309 size = min_t(uint, count, BULK_SIZE); 310 memcpy(send_buf, firmware->data + sent, size); 311 312 err = usb_bulk_msg(udev, pipe, send_buf, size, 313 &len, 3000); 314 if (err || (len != size)) { 315 ath3k_log_failed_loading(err, len, size, count); 316 kfree(send_buf); 317 return err; 318 } 319 sent += size; 320 count -= size; 321 } 322 323 kfree(send_buf); 324 return 0; 325} 326 327static void ath3k_switch_pid(struct usb_device *udev) 328{ 329 usb_control_msg_send(udev, 0, USB_REG_SWITCH_VID_PID, USB_TYPE_VENDOR, 330 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT, GFP_KERNEL); 331} 332 333static int ath3k_set_normal_mode(struct usb_device *udev) 334{ 335 unsigned char fw_state; 336 int ret; 337 338 ret = ath3k_get_state(udev, &fw_state); 339 if (ret) { 340 BT_ERR("Can't get state to change to normal mode err"); 341 return ret; 342 } 343 344 if ((fw_state & ATH3K_MODE_MASK) == ATH3K_NORMAL_MODE) { 345 BT_DBG("firmware was already in normal mode"); 346 return 0; 347 } 348 349 return usb_control_msg_send(udev, 0, ATH3K_SET_NORMAL_MODE, 350 USB_TYPE_VENDOR, 0, 0, NULL, 0, 351 USB_CTRL_SET_TIMEOUT, GFP_KERNEL); 352} 353 354static int ath3k_load_patch(struct usb_device *udev) 355{ 356 unsigned char fw_state; 357 char filename[ATH3K_NAME_LEN]; 358 const struct firmware *firmware; 359 struct ath3k_version fw_version; 360 __u32 pt_rom_version, pt_build_version; 361 int ret; 362 363 ret = ath3k_get_state(udev, &fw_state); 364 if (ret) { 365 BT_ERR("Can't get state to change to load ram patch err"); 366 return ret; 367 } 368 369 if (fw_state & ATH3K_PATCH_UPDATE) { 370 BT_DBG("Patch was already downloaded"); 371 return 0; 372 } 373 374 ret = ath3k_get_version(udev, &fw_version); 375 if (ret) { 376 BT_ERR("Can't get version to change to load ram patch err"); 377 return ret; 378 } 379 380 snprintf(filename, ATH3K_NAME_LEN, "ar3k/AthrBT_0x%08x.dfu", 381 le32_to_cpu(fw_version.rom_version)); 382 383 ret = request_firmware(&firmware, filename, &udev->dev); 384 if (ret < 0) { 385 BT_ERR("Patch file not found %s", filename); 386 return ret; 387 } 388 389 pt_rom_version = get_unaligned_le32(firmware->data + 390 firmware->size - 8); 391 pt_build_version = get_unaligned_le32(firmware->data + 392 firmware->size - 4); 393 394 if (pt_rom_version != le32_to_cpu(fw_version.rom_version) || 395 pt_build_version <= le32_to_cpu(fw_version.build_version)) { 396 BT_ERR("Patch file version did not match with firmware"); 397 release_firmware(firmware); 398 return -EINVAL; 399 } 400 401 ret = ath3k_load_fwfile(udev, firmware); 402 release_firmware(firmware); 403 404 return ret; 405} 406 407static int ath3k_load_syscfg(struct usb_device *udev) 408{ 409 unsigned char fw_state; 410 char filename[ATH3K_NAME_LEN]; 411 const struct firmware *firmware; 412 struct ath3k_version fw_version; 413 int clk_value, ret; 414 415 ret = ath3k_get_state(udev, &fw_state); 416 if (ret) { 417 BT_ERR("Can't get state to change to load configuration err"); 418 return -EBUSY; 419 } 420 421 ret = ath3k_get_version(udev, &fw_version); 422 if (ret) { 423 BT_ERR("Can't get version to change to load ram patch err"); 424 return ret; 425 } 426 427 switch (fw_version.ref_clock) { 428 429 case ATH3K_XTAL_FREQ_26M: 430 clk_value = 26; 431 break; 432 case ATH3K_XTAL_FREQ_40M: 433 clk_value = 40; 434 break; 435 case ATH3K_XTAL_FREQ_19P2: 436 clk_value = 19; 437 break; 438 default: 439 clk_value = 0; 440 break; 441 } 442 443 snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s", 444 le32_to_cpu(fw_version.rom_version), clk_value, ".dfu"); 445 446 ret = request_firmware(&firmware, filename, &udev->dev); 447 if (ret < 0) { 448 BT_ERR("Configuration file not found %s", filename); 449 return ret; 450 } 451 452 ret = ath3k_load_fwfile(udev, firmware); 453 release_firmware(firmware); 454 455 return ret; 456} 457 458static int ath3k_probe(struct usb_interface *intf, 459 const struct usb_device_id *id) 460{ 461 const struct firmware *firmware; 462 struct usb_device *udev = interface_to_usbdev(intf); 463 int ret; 464 465 BT_DBG("intf %p id %p", intf, id); 466 467 if (intf->cur_altsetting->desc.bInterfaceNumber != 0) 468 return -ENODEV; 469 470 /* match device ID in ath3k blacklist table */ 471 if (!id->driver_info) { 472 const struct usb_device_id *match; 473 474 match = usb_match_id(intf, ath3k_blist_tbl); 475 if (match) 476 id = match; 477 } 478 479 /* load patch and sysconfig files for AR3012 */ 480 if (id->driver_info & BTUSB_ATH3012) { 481 /* New firmware with patch and sysconfig files already loaded */ 482 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001) 483 return -ENODEV; 484 485 ret = ath3k_load_patch(udev); 486 if (ret < 0) { 487 BT_ERR("Loading patch file failed"); 488 return ret; 489 } 490 ret = ath3k_load_syscfg(udev); 491 if (ret < 0) { 492 BT_ERR("Loading sysconfig file failed"); 493 return ret; 494 } 495 ret = ath3k_set_normal_mode(udev); 496 if (ret) { 497 BT_ERR("Set normal mode failed"); 498 return ret; 499 } 500 ath3k_switch_pid(udev); 501 return 0; 502 } 503 504 ret = request_firmware(&firmware, ATH3K_FIRMWARE, &udev->dev); 505 if (ret < 0) { 506 if (ret == -ENOENT) 507 BT_ERR("Firmware file \"%s\" not found", 508 ATH3K_FIRMWARE); 509 else 510 BT_ERR("Firmware file \"%s\" request failed (err=%d)", 511 ATH3K_FIRMWARE, ret); 512 return ret; 513 } 514 515 ret = ath3k_load_firmware(udev, firmware); 516 release_firmware(firmware); 517 518 return ret; 519} 520 521static void ath3k_disconnect(struct usb_interface *intf) 522{ 523 BT_DBG("%s intf %p", __func__, intf); 524} 525 526static struct usb_driver ath3k_driver = { 527 .name = "ath3k", 528 .probe = ath3k_probe, 529 .disconnect = ath3k_disconnect, 530 .id_table = ath3k_table, 531 .disable_hub_initiated_lpm = 1, 532}; 533 534module_usb_driver(ath3k_driver); 535 536MODULE_AUTHOR("Atheros Communications"); 537MODULE_DESCRIPTION("Atheros AR30xx firmware driver"); 538MODULE_VERSION(VERSION); 539MODULE_LICENSE("GPL"); 540MODULE_FIRMWARE(ATH3K_FIRMWARE); 541