1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * arch/xtensa/lib/pci-auto.c 4 * 5 * PCI autoconfiguration library 6 * 7 * Copyright (C) 2001 - 2005 Tensilica Inc. 8 * 9 * Chris Zankel <zankel@tensilica.com, cez@zankel.net> 10 * 11 * Based on work from Matt Porter <mporter@mvista.com> 12 */ 13 14#include <linux/bitfield.h> 15#include <linux/kernel.h> 16#include <linux/init.h> 17#include <linux/pci.h> 18 19#include <asm/pci-bridge.h> 20 21 22/* 23 * 24 * Setting up a PCI 25 * 26 * pci_ctrl->first_busno = <first bus number (0)> 27 * pci_ctrl->last_busno = <last bus number (0xff)> 28 * pci_ctrl->ops = <PCI config operations> 29 * pci_ctrl->map_irq = <function to return the interrupt number for a device> 30 * 31 * pci_ctrl->io_space.start = <IO space start address (PCI view)> 32 * pci_ctrl->io_space.end = <IO space end address (PCI view)> 33 * pci_ctrl->io_space.base = <IO space offset: address 0 from CPU space> 34 * pci_ctrl->mem_space.start = <MEM space start address (PCI view)> 35 * pci_ctrl->mem_space.end = <MEM space end address (PCI view)> 36 * pci_ctrl->mem_space.base = <MEM space offset: address 0 from CPU space> 37 * 38 * pcibios_init_resource(&pci_ctrl->io_resource, <IO space start>, 39 * <IO space end>, IORESOURCE_IO, "PCI host bridge"); 40 * pcibios_init_resource(&pci_ctrl->mem_resources[0], <MEM space start>, 41 * <MEM space end>, IORESOURCE_MEM, "PCI host bridge"); 42 * 43 * pci_ctrl->last_busno = pciauto_bus_scan(pci_ctrl,pci_ctrl->first_busno); 44 * 45 * int __init pciauto_bus_scan(struct pci_controller *pci_ctrl, int current_bus) 46 * 47 */ 48 49static int pciauto_upper_iospc; 50static int pciauto_upper_memspc; 51 52static struct pci_dev pciauto_dev; 53static struct pci_bus pciauto_bus; 54 55/* 56 * Helper functions 57 */ 58 59/* Initialize the bars of a PCI device. */ 60 61static void __init 62pciauto_setup_bars(struct pci_dev *dev, int bar_limit) 63{ 64 int bar_size; 65 int bar, bar_nr; 66 int *upper_limit; 67 int found_mem64 = 0; 68 69 for (bar = PCI_BASE_ADDRESS_0, bar_nr = 0; 70 bar <= bar_limit; 71 bar+=4, bar_nr++) 72 { 73 /* Tickle the BAR and get the size */ 74 pci_write_config_dword(dev, bar, 0xffffffff); 75 pci_read_config_dword(dev, bar, &bar_size); 76 77 /* If BAR is not implemented go to the next BAR */ 78 if (!bar_size) 79 continue; 80 81 /* Check the BAR type and set our address mask */ 82 if (bar_size & PCI_BASE_ADDRESS_SPACE_IO) 83 { 84 bar_size &= PCI_BASE_ADDRESS_IO_MASK; 85 upper_limit = &pciauto_upper_iospc; 86 pr_debug("PCI Autoconfig: BAR %d, I/O, ", bar_nr); 87 } 88 else 89 { 90 if ((bar_size & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == 91 PCI_BASE_ADDRESS_MEM_TYPE_64) 92 found_mem64 = 1; 93 94 bar_size &= PCI_BASE_ADDRESS_MEM_MASK; 95 upper_limit = &pciauto_upper_memspc; 96 pr_debug("PCI Autoconfig: BAR %d, Mem, ", bar_nr); 97 } 98 99 /* Allocate a base address (bar_size is negative!) */ 100 *upper_limit = (*upper_limit + bar_size) & bar_size; 101 102 /* Write it out and update our limit */ 103 pci_write_config_dword(dev, bar, *upper_limit); 104 105 /* 106 * If we are a 64-bit decoder then increment to the 107 * upper 32 bits of the bar and force it to locate 108 * in the lower 4GB of memory. 109 */ 110 111 if (found_mem64) 112 pci_write_config_dword(dev, (bar+=4), 0x00000000); 113 114 pr_debug("size=0x%x, address=0x%x\n", 115 ~bar_size + 1, *upper_limit); 116 } 117} 118 119/* Initialize the interrupt number. */ 120 121static void __init 122pciauto_setup_irq(struct pci_controller* pci_ctrl,struct pci_dev *dev,int devfn) 123{ 124 u8 pin; 125 int irq = 0; 126 127 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); 128 129 /* Fix illegal pin numbers. */ 130 131 if (pin == 0 || pin > 4) 132 pin = 1; 133 134 if (pci_ctrl->map_irq) 135 irq = pci_ctrl->map_irq(dev, PCI_SLOT(devfn), pin); 136 137 if (irq == -1) 138 irq = 0; 139 140 pr_debug("PCI Autoconfig: Interrupt %d, pin %d\n", irq, pin); 141 142 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); 143} 144 145 146static void __init 147pciauto_prescan_setup_bridge(struct pci_dev *dev, int current_bus, 148 int sub_bus, int *iosave, int *memsave) 149{ 150 /* Configure bus number registers */ 151 pci_write_config_byte(dev, PCI_PRIMARY_BUS, current_bus); 152 pci_write_config_byte(dev, PCI_SECONDARY_BUS, sub_bus + 1); 153 pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, 0xff); 154 155 /* Round memory allocator to 1MB boundary */ 156 pciauto_upper_memspc &= ~(0x100000 - 1); 157 *memsave = pciauto_upper_memspc; 158 159 /* Round I/O allocator to 4KB boundary */ 160 pciauto_upper_iospc &= ~(0x1000 - 1); 161 *iosave = pciauto_upper_iospc; 162 163 /* Set up memory and I/O filter limits, assume 32-bit I/O space */ 164 pci_write_config_word(dev, PCI_MEMORY_LIMIT, 165 ((pciauto_upper_memspc - 1) & 0xfff00000) >> 16); 166 pci_write_config_byte(dev, PCI_IO_LIMIT, 167 ((pciauto_upper_iospc - 1) & 0x0000f000) >> 8); 168 pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16, 169 ((pciauto_upper_iospc - 1) & 0xffff0000) >> 16); 170} 171 172static void __init 173pciauto_postscan_setup_bridge(struct pci_dev *dev, int current_bus, int sub_bus, 174 int *iosave, int *memsave) 175{ 176 int cmdstat; 177 178 /* Configure bus number registers */ 179 pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, sub_bus); 180 181 /* 182 * Round memory allocator to 1MB boundary. 183 * If no space used, allocate minimum. 184 */ 185 pciauto_upper_memspc &= ~(0x100000 - 1); 186 if (*memsave == pciauto_upper_memspc) 187 pciauto_upper_memspc -= 0x00100000; 188 189 pci_write_config_word(dev, PCI_MEMORY_BASE, pciauto_upper_memspc >> 16); 190 191 /* Allocate 1MB for pre-fretch */ 192 pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 193 ((pciauto_upper_memspc - 1) & 0xfff00000) >> 16); 194 195 pciauto_upper_memspc -= 0x100000; 196 197 pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 198 pciauto_upper_memspc >> 16); 199 200 /* Round I/O allocator to 4KB boundary */ 201 pciauto_upper_iospc &= ~(0x1000 - 1); 202 if (*iosave == pciauto_upper_iospc) 203 pciauto_upper_iospc -= 0x1000; 204 205 pci_write_config_byte(dev, PCI_IO_BASE, 206 (pciauto_upper_iospc & 0x0000f000) >> 8); 207 pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 208 pciauto_upper_iospc >> 16); 209 210 /* Enable memory and I/O accesses, enable bus master */ 211 pci_read_config_dword(dev, PCI_COMMAND, &cmdstat); 212 pci_write_config_dword(dev, PCI_COMMAND, 213 cmdstat | 214 PCI_COMMAND_IO | 215 PCI_COMMAND_MEMORY | 216 PCI_COMMAND_MASTER); 217} 218 219/* 220 * Scan the current PCI bus. 221 */ 222 223 224int __init pciauto_bus_scan(struct pci_controller *pci_ctrl, int current_bus) 225{ 226 int sub_bus, pci_devfn, pci_class, cmdstat; 227 unsigned short vid; 228 unsigned char header_type; 229 struct pci_dev *dev = &pciauto_dev; 230 bool found_multi = false; 231 232 pciauto_dev.bus = &pciauto_bus; 233 pciauto_dev.sysdata = pci_ctrl; 234 pciauto_bus.ops = pci_ctrl->ops; 235 236 /* 237 * Fetch our I/O and memory space upper boundaries used 238 * to allocated base addresses on this pci_controller. 239 */ 240 241 if (current_bus == pci_ctrl->first_busno) 242 { 243 pciauto_upper_iospc = pci_ctrl->io_resource.end + 1; 244 pciauto_upper_memspc = pci_ctrl->mem_resources[0].end + 1; 245 } 246 247 sub_bus = current_bus; 248 249 for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) 250 { 251 /* Skip our host bridge */ 252 if ((current_bus == pci_ctrl->first_busno) && (pci_devfn == 0)) 253 continue; 254 255 if (PCI_FUNC(pci_devfn) && !found_multi) 256 continue; 257 258 pciauto_bus.number = current_bus; 259 pciauto_dev.devfn = pci_devfn; 260 261 /* If config space read fails from this device, move on */ 262 if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type)) 263 continue; 264 265 if (!PCI_FUNC(pci_devfn)) 266 found_multi = FIELD_GET(PCI_HEADER_TYPE_MFD, header_type); 267 pci_read_config_word(dev, PCI_VENDOR_ID, &vid); 268 269 if (vid == 0xffff || vid == 0x0000) { 270 found_multi = false; 271 continue; 272 } 273 274 pci_read_config_dword(dev, PCI_CLASS_REVISION, &pci_class); 275 276 if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) { 277 278 int iosave, memsave; 279 280 pr_debug("PCI Autoconfig: Found P2P bridge, device %d\n", 281 PCI_SLOT(pci_devfn)); 282 283 /* Allocate PCI I/O and/or memory space */ 284 pciauto_setup_bars(dev, PCI_BASE_ADDRESS_1); 285 286 pciauto_prescan_setup_bridge(dev, current_bus, sub_bus, 287 &iosave, &memsave); 288 sub_bus = pciauto_bus_scan(pci_ctrl, sub_bus+1); 289 pciauto_postscan_setup_bridge(dev, current_bus, sub_bus, 290 &iosave, &memsave); 291 pciauto_bus.number = current_bus; 292 293 continue; 294 295 } 296 297 /* 298 * Found a peripheral, enable some standard 299 * settings 300 */ 301 302 pci_read_config_dword(dev, PCI_COMMAND, &cmdstat); 303 pci_write_config_dword(dev, PCI_COMMAND, 304 cmdstat | 305 PCI_COMMAND_IO | 306 PCI_COMMAND_MEMORY | 307 PCI_COMMAND_MASTER); 308 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80); 309 310 /* Allocate PCI I/O and/or memory space */ 311 pr_debug("PCI Autoconfig: Found Bus %d, Device %d, Function %d\n", 312 current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn)); 313 314 pciauto_setup_bars(dev, PCI_BASE_ADDRESS_5); 315 pciauto_setup_irq(pci_ctrl, dev, pci_devfn); 316 } 317 return sub_bus; 318} 319