1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * Machine dependent access functions for RTC registers.
4 */
5#ifndef _ASM_X86_MC146818RTC_H
6#define _ASM_X86_MC146818RTC_H
7
8#include <asm/io.h>
9#include <asm/processor.h>
10
11#ifndef RTC_PORT
12#define RTC_PORT(x)	(0x70 + (x))
13#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
14#endif
15
16#if defined(CONFIG_X86_32)
17/*
18 * This lock provides nmi access to the CMOS/RTC registers.  It has some
19 * special properties.  It is owned by a CPU and stores the index register
20 * currently being accessed (if owned).  The idea here is that it works
21 * like a normal lock (normally).  However, in an NMI, the NMI code will
22 * first check to see if its CPU owns the lock, meaning that the NMI
23 * interrupted during the read/write of the device.  If it does, it goes ahead
24 * and performs the access and then restores the index register.  If it does
25 * not, it locks normally.
26 *
27 * Note that since we are working with NMIs, we need this lock even in
28 * a non-SMP machine just to mark that the lock is owned.
29 *
30 * This only works with compare-and-swap.  There is no other way to
31 * atomically claim the lock and set the owner.
32 */
33#include <linux/smp.h>
34extern volatile unsigned long cmos_lock;
35
36/*
37 * All of these below must be called with interrupts off, preempt
38 * disabled, etc.
39 */
40
41static inline void lock_cmos(unsigned char reg)
42{
43	unsigned long new;
44	new = ((smp_processor_id() + 1) << 8) | reg;
45	for (;;) {
46		if (cmos_lock) {
47			cpu_relax();
48			continue;
49		}
50		if (__cmpxchg(&cmos_lock, 0, new, sizeof(cmos_lock)) == 0)
51			return;
52	}
53}
54
55static inline void unlock_cmos(void)
56{
57	cmos_lock = 0;
58}
59
60static inline int do_i_have_lock_cmos(void)
61{
62	return (cmos_lock >> 8) == (smp_processor_id() + 1);
63}
64
65static inline unsigned char current_lock_cmos_reg(void)
66{
67	return cmos_lock & 0xff;
68}
69
70#define lock_cmos_prefix(reg)			\
71	do {					\
72		unsigned long cmos_flags;	\
73		local_irq_save(cmos_flags);	\
74		lock_cmos(reg)
75
76#define lock_cmos_suffix(reg)			\
77	unlock_cmos();				\
78	local_irq_restore(cmos_flags);		\
79	} while (0)
80#else
81#define lock_cmos_prefix(reg) do {} while (0)
82#define lock_cmos_suffix(reg) do {} while (0)
83#define lock_cmos(reg) do { } while (0)
84#define unlock_cmos() do { } while (0)
85#define do_i_have_lock_cmos() 0
86#define current_lock_cmos_reg() 0
87#endif
88
89/*
90 * The yet supported machines all access the RTC index register via
91 * an ISA port access but the way to access the date register differs ...
92 */
93#define CMOS_READ(addr) rtc_cmos_read(addr)
94#define CMOS_WRITE(val, addr) rtc_cmos_write(val, addr)
95unsigned char rtc_cmos_read(unsigned char addr);
96void rtc_cmos_write(unsigned char val, unsigned char addr);
97
98extern int mach_set_cmos_time(const struct timespec64 *now);
99extern void mach_get_cmos_time(struct timespec64 *now);
100
101#define RTC_IRQ 8
102
103#endif /* _ASM_X86_MC146818RTC_H */
104