1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * MPC85xx/86xx PCI Express structure define 4 * 5 * Copyright 2007,2011 Freescale Semiconductor, Inc 6 */ 7 8#ifdef __KERNEL__ 9#ifndef __POWERPC_FSL_PCI_H 10#define __POWERPC_FSL_PCI_H 11 12struct platform_device; 13 14 15/* FSL PCI controller BRR1 register */ 16#define PCI_FSL_BRR1 0xbf8 17#define PCI_FSL_BRR1_VER 0xffff 18 19#define PCIE_LTSSM 0x0404 /* PCIE Link Training and Status */ 20#define PCIE_LTSSM_L0 0x16 /* L0 state */ 21#define PCIE_FSL_CSR_CLASSCODE 0x474 /* FSL GPEX CSR */ 22#define PCIE_IP_REV_2_2 0x02080202 /* PCIE IP block version Rev2.2 */ 23#define PCIE_IP_REV_3_0 0x02080300 /* PCIE IP block version Rev3.0 */ 24#define PIWAR_EN 0x80000000 /* Enable */ 25#define PIWAR_PF 0x20000000 /* prefetch */ 26#define PIWAR_TGI_LOCAL 0x00f00000 /* target - local memory */ 27#define PIWAR_READ_SNOOP 0x00050000 28#define PIWAR_WRITE_SNOOP 0x00005000 29#define PIWAR_SZ_MASK 0x0000003f 30 31#define PEX_PMCR_PTOMR 0x1 32#define PEX_PMCR_EXL2S 0x2 33 34#define PME_DISR_EN_PTOD 0x00008000 35#define PME_DISR_EN_ENL23D 0x00002000 36#define PME_DISR_EN_EXL23D 0x00001000 37 38/* PCI/PCI Express outbound window reg */ 39struct pci_outbound_window_regs { 40 __be32 potar; /* 0x.0 - Outbound translation address register */ 41 __be32 potear; /* 0x.4 - Outbound translation extended address register */ 42 __be32 powbar; /* 0x.8 - Outbound window base address register */ 43 u8 res1[4]; 44 __be32 powar; /* 0x.10 - Outbound window attributes register */ 45 u8 res2[12]; 46}; 47 48/* PCI/PCI Express inbound window reg */ 49struct pci_inbound_window_regs { 50 __be32 pitar; /* 0x.0 - Inbound translation address register */ 51 u8 res1[4]; 52 __be32 piwbar; /* 0x.8 - Inbound window base address register */ 53 __be32 piwbear; /* 0x.c - Inbound window base extended address register */ 54 __be32 piwar; /* 0x.10 - Inbound window attributes register */ 55 u8 res2[12]; 56}; 57 58/* PCI/PCI Express IO block registers for 85xx/86xx */ 59struct ccsr_pci { 60 __be32 config_addr; /* 0x.000 - PCI/PCIE Configuration Address Register */ 61 __be32 config_data; /* 0x.004 - PCI/PCIE Configuration Data Register */ 62 __be32 int_ack; /* 0x.008 - PCI Interrupt Acknowledge Register */ 63 __be32 pex_otb_cpl_tor; /* 0x.00c - PCIE Outbound completion timeout register */ 64 __be32 pex_conf_tor; /* 0x.010 - PCIE configuration timeout register */ 65 __be32 pex_config; /* 0x.014 - PCIE CONFIG Register */ 66 __be32 pex_int_status; /* 0x.018 - PCIE interrupt status */ 67 u8 res2[4]; 68 __be32 pex_pme_mes_dr; /* 0x.020 - PCIE PME and message detect register */ 69 __be32 pex_pme_mes_disr; /* 0x.024 - PCIE PME and message disable register */ 70 __be32 pex_pme_mes_ier; /* 0x.028 - PCIE PME and message interrupt enable register */ 71 __be32 pex_pmcr; /* 0x.02c - PCIE power management command register */ 72 u8 res3[3016]; 73 __be32 block_rev1; /* 0x.bf8 - PCIE Block Revision register 1 */ 74 __be32 block_rev2; /* 0x.bfc - PCIE Block Revision register 2 */ 75 76/* PCI/PCI Express outbound window 0-4 77 * Window 0 is the default window and is the only window enabled upon reset. 78 * The default outbound register set is used when a transaction misses 79 * in all of the other outbound windows. 80 */ 81 struct pci_outbound_window_regs pow[5]; 82 u8 res14[96]; 83 struct pci_inbound_window_regs pmit; /* 0xd00 - 0xd9c Inbound MSI */ 84 u8 res6[96]; 85/* PCI/PCI Express inbound window 3-0 86 * inbound window 1 supports only a 32-bit base address and does not 87 * define an inbound window base extended address register. 88 */ 89 struct pci_inbound_window_regs piw[4]; 90 91 __be32 pex_err_dr; /* 0x.e00 - PCI/PCIE error detect register */ 92 u8 res21[4]; 93 __be32 pex_err_en; /* 0x.e08 - PCI/PCIE error interrupt enable register */ 94 u8 res22[4]; 95 __be32 pex_err_disr; /* 0x.e10 - PCI/PCIE error disable register */ 96 u8 res23[12]; 97 __be32 pex_err_cap_stat; /* 0x.e20 - PCI/PCIE error capture status register */ 98 u8 res24[4]; 99 __be32 pex_err_cap_r0; /* 0x.e28 - PCIE error capture register 0 */ 100 __be32 pex_err_cap_r1; /* 0x.e2c - PCIE error capture register 0 */ 101 __be32 pex_err_cap_r2; /* 0x.e30 - PCIE error capture register 0 */ 102 __be32 pex_err_cap_r3; /* 0x.e34 - PCIE error capture register 0 */ 103 u8 res_e38[200]; 104 __be32 pdb_stat; /* 0x.f00 - PCIE Debug Status */ 105 u8 res_f04[16]; 106 __be32 pex_csr0; /* 0x.f14 - PEX Control/Status register 0*/ 107#define PEX_CSR0_LTSSM_MASK 0xFC 108#define PEX_CSR0_LTSSM_SHIFT 2 109#define PEX_CSR0_LTSSM_L0 0x11 110 __be32 pex_csr1; /* 0x.f18 - PEX Control/Status register 1*/ 111 u8 res_f1c[228]; 112 113}; 114 115extern void fsl_pcibios_fixup_bus(struct pci_bus *bus); 116extern void fsl_pcibios_fixup_phb(struct pci_controller *phb); 117extern int mpc83xx_add_bridge(struct device_node *dev); 118u64 fsl_pci_immrbar_base(struct pci_controller *hose); 119 120extern struct device_node *fsl_pci_primary; 121 122#ifdef CONFIG_PCI 123void __init fsl_pci_assign_primary(void); 124#else 125static inline void fsl_pci_assign_primary(void) {} 126#endif 127 128#ifdef CONFIG_FSL_PCI 129extern int fsl_pci_mcheck_exception(struct pt_regs *); 130#else 131static inline int fsl_pci_mcheck_exception(struct pt_regs *regs) {return 0; } 132#endif 133 134#endif /* __POWERPC_FSL_PCI_H */ 135#endif /* __KERNEL__ */ 136