1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Support PCI/PCIe on PowerNV platforms 4 * 5 * Copyright 2011 Benjamin Herrenschmidt, IBM Corp. 6 */ 7 8#undef DEBUG 9 10#include <linux/kernel.h> 11#include <linux/pci.h> 12#include <linux/crash_dump.h> 13#include <linux/delay.h> 14#include <linux/string.h> 15#include <linux/init.h> 16#include <linux/memblock.h> 17#include <linux/irq.h> 18#include <linux/io.h> 19#include <linux/msi.h> 20#include <linux/iommu.h> 21#include <linux/rculist.h> 22#include <linux/sizes.h> 23#include <linux/debugfs.h> 24#include <linux/of_address.h> 25#include <linux/of_irq.h> 26 27#include <asm/sections.h> 28#include <asm/io.h> 29#include <asm/pci-bridge.h> 30#include <asm/machdep.h> 31#include <asm/msi_bitmap.h> 32#include <asm/ppc-pci.h> 33#include <asm/opal.h> 34#include <asm/iommu.h> 35#include <asm/tce.h> 36#include <asm/xics.h> 37#include <asm/firmware.h> 38#include <asm/pnv-pci.h> 39#include <asm/mmzone.h> 40#include <asm/xive.h> 41 42#include <misc/cxl-base.h> 43 44#include "powernv.h" 45#include "pci.h" 46#include "../../../../drivers/pci/pci.h" 47 48/* This array is indexed with enum pnv_phb_type */ 49static const char * const pnv_phb_names[] = { "IODA2", "NPU_OCAPI" }; 50 51static void pnv_pci_ioda2_set_bypass(struct pnv_ioda_pe *pe, bool enable); 52static void pnv_pci_configure_bus(struct pci_bus *bus); 53 54void pe_level_printk(const struct pnv_ioda_pe *pe, const char *level, 55 const char *fmt, ...) 56{ 57 struct va_format vaf; 58 va_list args; 59 char pfix[32]; 60 61 va_start(args, fmt); 62 63 vaf.fmt = fmt; 64 vaf.va = &args; 65 66 if (pe->flags & PNV_IODA_PE_DEV) 67 strscpy(pfix, dev_name(&pe->pdev->dev), sizeof(pfix)); 68 else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)) 69 sprintf(pfix, "%04x:%02x ", 70 pci_domain_nr(pe->pbus), pe->pbus->number); 71#ifdef CONFIG_PCI_IOV 72 else if (pe->flags & PNV_IODA_PE_VF) 73 sprintf(pfix, "%04x:%02x:%2x.%d", 74 pci_domain_nr(pe->parent_dev->bus), 75 (pe->rid & 0xff00) >> 8, 76 PCI_SLOT(pe->rid), PCI_FUNC(pe->rid)); 77#endif /* CONFIG_PCI_IOV*/ 78 79 printk("%spci %s: [PE# %.2x] %pV", 80 level, pfix, pe->pe_number, &vaf); 81 82 va_end(args); 83} 84 85static bool pnv_iommu_bypass_disabled __read_mostly; 86static bool pci_reset_phbs __read_mostly; 87 88static int __init iommu_setup(char *str) 89{ 90 if (!str) 91 return -EINVAL; 92 93 while (*str) { 94 if (!strncmp(str, "nobypass", 8)) { 95 pnv_iommu_bypass_disabled = true; 96 pr_info("PowerNV: IOMMU bypass window disabled.\n"); 97 break; 98 } 99 str += strcspn(str, ","); 100 if (*str == ',') 101 str++; 102 } 103 104 return 0; 105} 106early_param("iommu", iommu_setup); 107 108static int __init pci_reset_phbs_setup(char *str) 109{ 110 pci_reset_phbs = true; 111 return 0; 112} 113 114early_param("ppc_pci_reset_phbs", pci_reset_phbs_setup); 115 116static struct pnv_ioda_pe *pnv_ioda_init_pe(struct pnv_phb *phb, int pe_no) 117{ 118 s64 rc; 119 120 phb->ioda.pe_array[pe_no].phb = phb; 121 phb->ioda.pe_array[pe_no].pe_number = pe_no; 122 phb->ioda.pe_array[pe_no].dma_setup_done = false; 123 124 /* 125 * Clear the PE frozen state as it might be put into frozen state 126 * in the last PCI remove path. It's not harmful to do so when the 127 * PE is already in unfrozen state. 128 */ 129 rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, 130 OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); 131 if (rc != OPAL_SUCCESS && rc != OPAL_UNSUPPORTED) 132 pr_warn("%s: Error %lld unfreezing PHB#%x-PE#%x\n", 133 __func__, rc, phb->hose->global_number, pe_no); 134 135 return &phb->ioda.pe_array[pe_no]; 136} 137 138static void pnv_ioda_reserve_pe(struct pnv_phb *phb, int pe_no) 139{ 140 if (!(pe_no >= 0 && pe_no < phb->ioda.total_pe_num)) { 141 pr_warn("%s: Invalid PE %x on PHB#%x\n", 142 __func__, pe_no, phb->hose->global_number); 143 return; 144 } 145 146 mutex_lock(&phb->ioda.pe_alloc_mutex); 147 if (test_and_set_bit(pe_no, phb->ioda.pe_alloc)) 148 pr_debug("%s: PE %x was reserved on PHB#%x\n", 149 __func__, pe_no, phb->hose->global_number); 150 mutex_unlock(&phb->ioda.pe_alloc_mutex); 151 152 pnv_ioda_init_pe(phb, pe_no); 153} 154 155struct pnv_ioda_pe *pnv_ioda_alloc_pe(struct pnv_phb *phb, int count) 156{ 157 struct pnv_ioda_pe *ret = NULL; 158 int run = 0, pe, i; 159 160 mutex_lock(&phb->ioda.pe_alloc_mutex); 161 162 /* scan backwards for a run of @count cleared bits */ 163 for (pe = phb->ioda.total_pe_num - 1; pe >= 0; pe--) { 164 if (test_bit(pe, phb->ioda.pe_alloc)) { 165 run = 0; 166 continue; 167 } 168 169 run++; 170 if (run == count) 171 break; 172 } 173 if (run != count) 174 goto out; 175 176 for (i = pe; i < pe + count; i++) { 177 set_bit(i, phb->ioda.pe_alloc); 178 pnv_ioda_init_pe(phb, i); 179 } 180 ret = &phb->ioda.pe_array[pe]; 181 182out: 183 mutex_unlock(&phb->ioda.pe_alloc_mutex); 184 return ret; 185} 186 187void pnv_ioda_free_pe(struct pnv_ioda_pe *pe) 188{ 189 struct pnv_phb *phb = pe->phb; 190 unsigned int pe_num = pe->pe_number; 191 192 WARN_ON(pe->pdev); 193 memset(pe, 0, sizeof(struct pnv_ioda_pe)); 194 195 mutex_lock(&phb->ioda.pe_alloc_mutex); 196 clear_bit(pe_num, phb->ioda.pe_alloc); 197 mutex_unlock(&phb->ioda.pe_alloc_mutex); 198} 199 200/* The default M64 BAR is shared by all PEs */ 201static int pnv_ioda2_init_m64(struct pnv_phb *phb) 202{ 203 const char *desc; 204 struct resource *r; 205 s64 rc; 206 207 /* Configure the default M64 BAR */ 208 rc = opal_pci_set_phb_mem_window(phb->opal_id, 209 OPAL_M64_WINDOW_TYPE, 210 phb->ioda.m64_bar_idx, 211 phb->ioda.m64_base, 212 0, /* unused */ 213 phb->ioda.m64_size); 214 if (rc != OPAL_SUCCESS) { 215 desc = "configuring"; 216 goto fail; 217 } 218 219 /* Enable the default M64 BAR */ 220 rc = opal_pci_phb_mmio_enable(phb->opal_id, 221 OPAL_M64_WINDOW_TYPE, 222 phb->ioda.m64_bar_idx, 223 OPAL_ENABLE_M64_SPLIT); 224 if (rc != OPAL_SUCCESS) { 225 desc = "enabling"; 226 goto fail; 227 } 228 229 /* 230 * Exclude the segments for reserved and root bus PE, which 231 * are first or last two PEs. 232 */ 233 r = &phb->hose->mem_resources[1]; 234 if (phb->ioda.reserved_pe_idx == 0) 235 r->start += (2 * phb->ioda.m64_segsize); 236 else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1)) 237 r->end -= (2 * phb->ioda.m64_segsize); 238 else 239 pr_warn(" Cannot strip M64 segment for reserved PE#%x\n", 240 phb->ioda.reserved_pe_idx); 241 242 return 0; 243 244fail: 245 pr_warn(" Failure %lld %s M64 BAR#%d\n", 246 rc, desc, phb->ioda.m64_bar_idx); 247 opal_pci_phb_mmio_enable(phb->opal_id, 248 OPAL_M64_WINDOW_TYPE, 249 phb->ioda.m64_bar_idx, 250 OPAL_DISABLE_M64); 251 return -EIO; 252} 253 254static void pnv_ioda_reserve_dev_m64_pe(struct pci_dev *pdev, 255 unsigned long *pe_bitmap) 256{ 257 struct pnv_phb *phb = pci_bus_to_pnvhb(pdev->bus); 258 struct resource *r; 259 resource_size_t base, sgsz, start, end; 260 int segno, i; 261 262 base = phb->ioda.m64_base; 263 sgsz = phb->ioda.m64_segsize; 264 for (i = 0; i <= PCI_ROM_RESOURCE; i++) { 265 r = &pdev->resource[i]; 266 if (!r->parent || !pnv_pci_is_m64(phb, r)) 267 continue; 268 269 start = ALIGN_DOWN(r->start - base, sgsz); 270 end = ALIGN(r->end - base, sgsz); 271 for (segno = start / sgsz; segno < end / sgsz; segno++) { 272 if (pe_bitmap) 273 set_bit(segno, pe_bitmap); 274 else 275 pnv_ioda_reserve_pe(phb, segno); 276 } 277 } 278} 279 280static void pnv_ioda_reserve_m64_pe(struct pci_bus *bus, 281 unsigned long *pe_bitmap, 282 bool all) 283{ 284 struct pci_dev *pdev; 285 286 list_for_each_entry(pdev, &bus->devices, bus_list) { 287 pnv_ioda_reserve_dev_m64_pe(pdev, pe_bitmap); 288 289 if (all && pdev->subordinate) 290 pnv_ioda_reserve_m64_pe(pdev->subordinate, 291 pe_bitmap, all); 292 } 293} 294 295static struct pnv_ioda_pe *pnv_ioda_pick_m64_pe(struct pci_bus *bus, bool all) 296{ 297 struct pnv_phb *phb = pci_bus_to_pnvhb(bus); 298 struct pnv_ioda_pe *master_pe, *pe; 299 unsigned long size, *pe_alloc; 300 int i; 301 302 /* Root bus shouldn't use M64 */ 303 if (pci_is_root_bus(bus)) 304 return NULL; 305 306 /* Allocate bitmap */ 307 size = ALIGN(phb->ioda.total_pe_num / 8, sizeof(unsigned long)); 308 pe_alloc = kzalloc(size, GFP_KERNEL); 309 if (!pe_alloc) { 310 pr_warn("%s: Out of memory !\n", 311 __func__); 312 return NULL; 313 } 314 315 /* Figure out reserved PE numbers by the PE */ 316 pnv_ioda_reserve_m64_pe(bus, pe_alloc, all); 317 318 /* 319 * the current bus might not own M64 window and that's all 320 * contributed by its child buses. For the case, we needn't 321 * pick M64 dependent PE#. 322 */ 323 if (bitmap_empty(pe_alloc, phb->ioda.total_pe_num)) { 324 kfree(pe_alloc); 325 return NULL; 326 } 327 328 /* 329 * Figure out the master PE and put all slave PEs to master 330 * PE's list to form compound PE. 331 */ 332 master_pe = NULL; 333 i = -1; 334 while ((i = find_next_bit(pe_alloc, phb->ioda.total_pe_num, i + 1)) < 335 phb->ioda.total_pe_num) { 336 pe = &phb->ioda.pe_array[i]; 337 338 phb->ioda.m64_segmap[pe->pe_number] = pe->pe_number; 339 if (!master_pe) { 340 pe->flags |= PNV_IODA_PE_MASTER; 341 INIT_LIST_HEAD(&pe->slaves); 342 master_pe = pe; 343 } else { 344 pe->flags |= PNV_IODA_PE_SLAVE; 345 pe->master = master_pe; 346 list_add_tail(&pe->list, &master_pe->slaves); 347 } 348 } 349 350 kfree(pe_alloc); 351 return master_pe; 352} 353 354static void __init pnv_ioda_parse_m64_window(struct pnv_phb *phb) 355{ 356 struct pci_controller *hose = phb->hose; 357 struct device_node *dn = hose->dn; 358 struct resource *res; 359 u32 m64_range[2], i; 360 const __be32 *r; 361 u64 pci_addr; 362 363 if (phb->type != PNV_PHB_IODA2) { 364 pr_info(" Not support M64 window\n"); 365 return; 366 } 367 368 if (!firmware_has_feature(FW_FEATURE_OPAL)) { 369 pr_info(" Firmware too old to support M64 window\n"); 370 return; 371 } 372 373 r = of_get_property(dn, "ibm,opal-m64-window", NULL); 374 if (!r) { 375 pr_info(" No <ibm,opal-m64-window> on %pOF\n", 376 dn); 377 return; 378 } 379 380 /* 381 * Find the available M64 BAR range and pickup the last one for 382 * covering the whole 64-bits space. We support only one range. 383 */ 384 if (of_property_read_u32_array(dn, "ibm,opal-available-m64-ranges", 385 m64_range, 2)) { 386 /* In absence of the property, assume 0..15 */ 387 m64_range[0] = 0; 388 m64_range[1] = 16; 389 } 390 /* We only support 64 bits in our allocator */ 391 if (m64_range[1] > 63) { 392 pr_warn("%s: Limiting M64 range to 63 (from %d) on PHB#%x\n", 393 __func__, m64_range[1], phb->hose->global_number); 394 m64_range[1] = 63; 395 } 396 /* Empty range, no m64 */ 397 if (m64_range[1] <= m64_range[0]) { 398 pr_warn("%s: M64 empty, disabling M64 usage on PHB#%x\n", 399 __func__, phb->hose->global_number); 400 return; 401 } 402 403 /* Configure M64 informations */ 404 res = &hose->mem_resources[1]; 405 res->name = dn->full_name; 406 res->start = of_translate_address(dn, r + 2); 407 res->end = res->start + of_read_number(r + 4, 2) - 1; 408 res->flags = (IORESOURCE_MEM | IORESOURCE_MEM_64 | IORESOURCE_PREFETCH); 409 pci_addr = of_read_number(r, 2); 410 hose->mem_offset[1] = res->start - pci_addr; 411 412 phb->ioda.m64_size = resource_size(res); 413 phb->ioda.m64_segsize = phb->ioda.m64_size / phb->ioda.total_pe_num; 414 phb->ioda.m64_base = pci_addr; 415 416 /* This lines up nicely with the display from processing OF ranges */ 417 pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx (M64 #%d..%d)\n", 418 res->start, res->end, pci_addr, m64_range[0], 419 m64_range[0] + m64_range[1] - 1); 420 421 /* Mark all M64 used up by default */ 422 phb->ioda.m64_bar_alloc = (unsigned long)-1; 423 424 /* Use last M64 BAR to cover M64 window */ 425 m64_range[1]--; 426 phb->ioda.m64_bar_idx = m64_range[0] + m64_range[1]; 427 428 pr_info(" Using M64 #%d as default window\n", phb->ioda.m64_bar_idx); 429 430 /* Mark remaining ones free */ 431 for (i = m64_range[0]; i < m64_range[1]; i++) 432 clear_bit(i, &phb->ioda.m64_bar_alloc); 433 434 /* 435 * Setup init functions for M64 based on IODA version, IODA3 uses 436 * the IODA2 code. 437 */ 438 phb->init_m64 = pnv_ioda2_init_m64; 439} 440 441static void pnv_ioda_freeze_pe(struct pnv_phb *phb, int pe_no) 442{ 443 struct pnv_ioda_pe *pe = &phb->ioda.pe_array[pe_no]; 444 struct pnv_ioda_pe *slave; 445 s64 rc; 446 447 /* Fetch master PE */ 448 if (pe->flags & PNV_IODA_PE_SLAVE) { 449 pe = pe->master; 450 if (WARN_ON(!pe || !(pe->flags & PNV_IODA_PE_MASTER))) 451 return; 452 453 pe_no = pe->pe_number; 454 } 455 456 /* Freeze master PE */ 457 rc = opal_pci_eeh_freeze_set(phb->opal_id, 458 pe_no, 459 OPAL_EEH_ACTION_SET_FREEZE_ALL); 460 if (rc != OPAL_SUCCESS) { 461 pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n", 462 __func__, rc, phb->hose->global_number, pe_no); 463 return; 464 } 465 466 /* Freeze slave PEs */ 467 if (!(pe->flags & PNV_IODA_PE_MASTER)) 468 return; 469 470 list_for_each_entry(slave, &pe->slaves, list) { 471 rc = opal_pci_eeh_freeze_set(phb->opal_id, 472 slave->pe_number, 473 OPAL_EEH_ACTION_SET_FREEZE_ALL); 474 if (rc != OPAL_SUCCESS) 475 pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n", 476 __func__, rc, phb->hose->global_number, 477 slave->pe_number); 478 } 479} 480 481static int pnv_ioda_unfreeze_pe(struct pnv_phb *phb, int pe_no, int opt) 482{ 483 struct pnv_ioda_pe *pe, *slave; 484 s64 rc; 485 486 /* Find master PE */ 487 pe = &phb->ioda.pe_array[pe_no]; 488 if (pe->flags & PNV_IODA_PE_SLAVE) { 489 pe = pe->master; 490 WARN_ON(!pe || !(pe->flags & PNV_IODA_PE_MASTER)); 491 pe_no = pe->pe_number; 492 } 493 494 /* Clear frozen state for master PE */ 495 rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, opt); 496 if (rc != OPAL_SUCCESS) { 497 pr_warn("%s: Failure %lld clear %d on PHB#%x-PE#%x\n", 498 __func__, rc, opt, phb->hose->global_number, pe_no); 499 return -EIO; 500 } 501 502 if (!(pe->flags & PNV_IODA_PE_MASTER)) 503 return 0; 504 505 /* Clear frozen state for slave PEs */ 506 list_for_each_entry(slave, &pe->slaves, list) { 507 rc = opal_pci_eeh_freeze_clear(phb->opal_id, 508 slave->pe_number, 509 opt); 510 if (rc != OPAL_SUCCESS) { 511 pr_warn("%s: Failure %lld clear %d on PHB#%x-PE#%x\n", 512 __func__, rc, opt, phb->hose->global_number, 513 slave->pe_number); 514 return -EIO; 515 } 516 } 517 518 return 0; 519} 520 521static int pnv_ioda_get_pe_state(struct pnv_phb *phb, int pe_no) 522{ 523 struct pnv_ioda_pe *slave, *pe; 524 u8 fstate = 0, state; 525 __be16 pcierr = 0; 526 s64 rc; 527 528 /* Sanity check on PE number */ 529 if (pe_no < 0 || pe_no >= phb->ioda.total_pe_num) 530 return OPAL_EEH_STOPPED_PERM_UNAVAIL; 531 532 /* 533 * Fetch the master PE and the PE instance might be 534 * not initialized yet. 535 */ 536 pe = &phb->ioda.pe_array[pe_no]; 537 if (pe->flags & PNV_IODA_PE_SLAVE) { 538 pe = pe->master; 539 WARN_ON(!pe || !(pe->flags & PNV_IODA_PE_MASTER)); 540 pe_no = pe->pe_number; 541 } 542 543 /* Check the master PE */ 544 rc = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, 545 &state, &pcierr, NULL); 546 if (rc != OPAL_SUCCESS) { 547 pr_warn("%s: Failure %lld getting " 548 "PHB#%x-PE#%x state\n", 549 __func__, rc, 550 phb->hose->global_number, pe_no); 551 return OPAL_EEH_STOPPED_TEMP_UNAVAIL; 552 } 553 554 /* Check the slave PE */ 555 if (!(pe->flags & PNV_IODA_PE_MASTER)) 556 return state; 557 558 list_for_each_entry(slave, &pe->slaves, list) { 559 rc = opal_pci_eeh_freeze_status(phb->opal_id, 560 slave->pe_number, 561 &fstate, 562 &pcierr, 563 NULL); 564 if (rc != OPAL_SUCCESS) { 565 pr_warn("%s: Failure %lld getting " 566 "PHB#%x-PE#%x state\n", 567 __func__, rc, 568 phb->hose->global_number, slave->pe_number); 569 return OPAL_EEH_STOPPED_TEMP_UNAVAIL; 570 } 571 572 /* 573 * Override the result based on the ascending 574 * priority. 575 */ 576 if (fstate > state) 577 state = fstate; 578 } 579 580 return state; 581} 582 583struct pnv_ioda_pe *pnv_pci_bdfn_to_pe(struct pnv_phb *phb, u16 bdfn) 584{ 585 int pe_number = phb->ioda.pe_rmap[bdfn]; 586 587 if (pe_number == IODA_INVALID_PE) 588 return NULL; 589 590 return &phb->ioda.pe_array[pe_number]; 591} 592 593struct pnv_ioda_pe *pnv_ioda_get_pe(struct pci_dev *dev) 594{ 595 struct pnv_phb *phb = pci_bus_to_pnvhb(dev->bus); 596 struct pci_dn *pdn = pci_get_pdn(dev); 597 598 if (!pdn) 599 return NULL; 600 if (pdn->pe_number == IODA_INVALID_PE) 601 return NULL; 602 return &phb->ioda.pe_array[pdn->pe_number]; 603} 604 605static int pnv_ioda_set_one_peltv(struct pnv_phb *phb, 606 struct pnv_ioda_pe *parent, 607 struct pnv_ioda_pe *child, 608 bool is_add) 609{ 610 const char *desc = is_add ? "adding" : "removing"; 611 uint8_t op = is_add ? OPAL_ADD_PE_TO_DOMAIN : 612 OPAL_REMOVE_PE_FROM_DOMAIN; 613 struct pnv_ioda_pe *slave; 614 long rc; 615 616 /* Parent PE affects child PE */ 617 rc = opal_pci_set_peltv(phb->opal_id, parent->pe_number, 618 child->pe_number, op); 619 if (rc != OPAL_SUCCESS) { 620 pe_warn(child, "OPAL error %ld %s to parent PELTV\n", 621 rc, desc); 622 return -ENXIO; 623 } 624 625 if (!(child->flags & PNV_IODA_PE_MASTER)) 626 return 0; 627 628 /* Compound case: parent PE affects slave PEs */ 629 list_for_each_entry(slave, &child->slaves, list) { 630 rc = opal_pci_set_peltv(phb->opal_id, parent->pe_number, 631 slave->pe_number, op); 632 if (rc != OPAL_SUCCESS) { 633 pe_warn(slave, "OPAL error %ld %s to parent PELTV\n", 634 rc, desc); 635 return -ENXIO; 636 } 637 } 638 639 return 0; 640} 641 642static int pnv_ioda_set_peltv(struct pnv_phb *phb, 643 struct pnv_ioda_pe *pe, 644 bool is_add) 645{ 646 struct pnv_ioda_pe *slave; 647 struct pci_dev *pdev = NULL; 648 int ret; 649 650 /* 651 * Clear PE frozen state. If it's master PE, we need 652 * clear slave PE frozen state as well. 653 */ 654 if (is_add) { 655 opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number, 656 OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); 657 if (pe->flags & PNV_IODA_PE_MASTER) { 658 list_for_each_entry(slave, &pe->slaves, list) 659 opal_pci_eeh_freeze_clear(phb->opal_id, 660 slave->pe_number, 661 OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); 662 } 663 } 664 665 /* 666 * Associate PE in PELT. We need add the PE into the 667 * corresponding PELT-V as well. Otherwise, the error 668 * originated from the PE might contribute to other 669 * PEs. 670 */ 671 ret = pnv_ioda_set_one_peltv(phb, pe, pe, is_add); 672 if (ret) 673 return ret; 674 675 /* For compound PEs, any one affects all of them */ 676 if (pe->flags & PNV_IODA_PE_MASTER) { 677 list_for_each_entry(slave, &pe->slaves, list) { 678 ret = pnv_ioda_set_one_peltv(phb, slave, pe, is_add); 679 if (ret) 680 return ret; 681 } 682 } 683 684 if (pe->flags & (PNV_IODA_PE_BUS_ALL | PNV_IODA_PE_BUS)) 685 pdev = pe->pbus->self; 686 else if (pe->flags & PNV_IODA_PE_DEV) 687 pdev = pe->pdev->bus->self; 688#ifdef CONFIG_PCI_IOV 689 else if (pe->flags & PNV_IODA_PE_VF) 690 pdev = pe->parent_dev; 691#endif /* CONFIG_PCI_IOV */ 692 while (pdev) { 693 struct pci_dn *pdn = pci_get_pdn(pdev); 694 struct pnv_ioda_pe *parent; 695 696 if (pdn && pdn->pe_number != IODA_INVALID_PE) { 697 parent = &phb->ioda.pe_array[pdn->pe_number]; 698 ret = pnv_ioda_set_one_peltv(phb, parent, pe, is_add); 699 if (ret) 700 return ret; 701 } 702 703 pdev = pdev->bus->self; 704 } 705 706 return 0; 707} 708 709static void pnv_ioda_unset_peltv(struct pnv_phb *phb, 710 struct pnv_ioda_pe *pe, 711 struct pci_dev *parent) 712{ 713 int64_t rc; 714 715 while (parent) { 716 struct pci_dn *pdn = pci_get_pdn(parent); 717 718 if (pdn && pdn->pe_number != IODA_INVALID_PE) { 719 rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number, 720 pe->pe_number, 721 OPAL_REMOVE_PE_FROM_DOMAIN); 722 /* XXX What to do in case of error ? */ 723 } 724 parent = parent->bus->self; 725 } 726 727 opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number, 728 OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); 729 730 /* Disassociate PE in PELT */ 731 rc = opal_pci_set_peltv(phb->opal_id, pe->pe_number, 732 pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN); 733 if (rc) 734 pe_warn(pe, "OPAL error %lld remove self from PELTV\n", rc); 735} 736 737int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe) 738{ 739 struct pci_dev *parent; 740 uint8_t bcomp, dcomp, fcomp; 741 int64_t rc; 742 long rid_end, rid; 743 744 /* Currently, we just deconfigure VF PE. Bus PE will always there.*/ 745 if (pe->pbus) { 746 int count; 747 748 dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER; 749 fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER; 750 parent = pe->pbus->self; 751 if (pe->flags & PNV_IODA_PE_BUS_ALL) 752 count = resource_size(&pe->pbus->busn_res); 753 else 754 count = 1; 755 756 switch(count) { 757 case 1: bcomp = OpalPciBusAll; break; 758 case 2: bcomp = OpalPciBus7Bits; break; 759 case 4: bcomp = OpalPciBus6Bits; break; 760 case 8: bcomp = OpalPciBus5Bits; break; 761 case 16: bcomp = OpalPciBus4Bits; break; 762 case 32: bcomp = OpalPciBus3Bits; break; 763 default: 764 dev_err(&pe->pbus->dev, "Number of subordinate buses %d unsupported\n", 765 count); 766 /* Do an exact match only */ 767 bcomp = OpalPciBusAll; 768 } 769 rid_end = pe->rid + (count << 8); 770 } else { 771#ifdef CONFIG_PCI_IOV 772 if (pe->flags & PNV_IODA_PE_VF) 773 parent = pe->parent_dev; 774 else 775#endif 776 parent = pe->pdev->bus->self; 777 bcomp = OpalPciBusAll; 778 dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER; 779 fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER; 780 rid_end = pe->rid + 1; 781 } 782 783 /* Clear the reverse map */ 784 for (rid = pe->rid; rid < rid_end; rid++) 785 phb->ioda.pe_rmap[rid] = IODA_INVALID_PE; 786 787 /* 788 * Release from all parents PELT-V. NPUs don't have a PELTV 789 * table 790 */ 791 if (phb->type != PNV_PHB_NPU_OCAPI) 792 pnv_ioda_unset_peltv(phb, pe, parent); 793 794 rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid, 795 bcomp, dcomp, fcomp, OPAL_UNMAP_PE); 796 if (rc) 797 pe_err(pe, "OPAL error %lld trying to setup PELT table\n", rc); 798 799 pe->pbus = NULL; 800 pe->pdev = NULL; 801#ifdef CONFIG_PCI_IOV 802 pe->parent_dev = NULL; 803#endif 804 805 return 0; 806} 807 808int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe) 809{ 810 uint8_t bcomp, dcomp, fcomp; 811 long rc, rid_end, rid; 812 813 /* Bus validation ? */ 814 if (pe->pbus) { 815 int count; 816 817 dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER; 818 fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER; 819 if (pe->flags & PNV_IODA_PE_BUS_ALL) 820 count = resource_size(&pe->pbus->busn_res); 821 else 822 count = 1; 823 824 switch(count) { 825 case 1: bcomp = OpalPciBusAll; break; 826 case 2: bcomp = OpalPciBus7Bits; break; 827 case 4: bcomp = OpalPciBus6Bits; break; 828 case 8: bcomp = OpalPciBus5Bits; break; 829 case 16: bcomp = OpalPciBus4Bits; break; 830 case 32: bcomp = OpalPciBus3Bits; break; 831 default: 832 dev_err(&pe->pbus->dev, "Number of subordinate buses %d unsupported\n", 833 count); 834 /* Do an exact match only */ 835 bcomp = OpalPciBusAll; 836 } 837 rid_end = pe->rid + (count << 8); 838 } else { 839 bcomp = OpalPciBusAll; 840 dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER; 841 fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER; 842 rid_end = pe->rid + 1; 843 } 844 845 /* 846 * Associate PE in PELT. We need add the PE into the 847 * corresponding PELT-V as well. Otherwise, the error 848 * originated from the PE might contribute to other 849 * PEs. 850 */ 851 rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid, 852 bcomp, dcomp, fcomp, OPAL_MAP_PE); 853 if (rc) { 854 pe_err(pe, "OPAL error %ld trying to setup PELT table\n", rc); 855 return -ENXIO; 856 } 857 858 /* 859 * Configure PELTV. NPUs don't have a PELTV table so skip 860 * configuration on them. 861 */ 862 if (phb->type != PNV_PHB_NPU_OCAPI) 863 pnv_ioda_set_peltv(phb, pe, true); 864 865 /* Setup reverse map */ 866 for (rid = pe->rid; rid < rid_end; rid++) 867 phb->ioda.pe_rmap[rid] = pe->pe_number; 868 869 pe->mve_number = 0; 870 871 return 0; 872} 873 874static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev) 875{ 876 struct pnv_phb *phb = pci_bus_to_pnvhb(dev->bus); 877 struct pci_dn *pdn = pci_get_pdn(dev); 878 struct pnv_ioda_pe *pe; 879 880 if (!pdn) { 881 pr_err("%s: Device tree node not associated properly\n", 882 pci_name(dev)); 883 return NULL; 884 } 885 if (pdn->pe_number != IODA_INVALID_PE) 886 return NULL; 887 888 pe = pnv_ioda_alloc_pe(phb, 1); 889 if (!pe) { 890 pr_warn("%s: Not enough PE# available, disabling device\n", 891 pci_name(dev)); 892 return NULL; 893 } 894 895 /* NOTE: We don't get a reference for the pointer in the PE 896 * data structure, both the device and PE structures should be 897 * destroyed at the same time. 898 * 899 * At some point we want to remove the PDN completely anyways 900 */ 901 pdn->pe_number = pe->pe_number; 902 pe->flags = PNV_IODA_PE_DEV; 903 pe->pdev = dev; 904 pe->pbus = NULL; 905 pe->mve_number = -1; 906 pe->rid = dev->bus->number << 8 | pdn->devfn; 907 pe->device_count++; 908 909 pe_info(pe, "Associated device to PE\n"); 910 911 if (pnv_ioda_configure_pe(phb, pe)) { 912 /* XXX What do we do here ? */ 913 pnv_ioda_free_pe(pe); 914 pdn->pe_number = IODA_INVALID_PE; 915 pe->pdev = NULL; 916 return NULL; 917 } 918 919 /* Put PE to the list */ 920 mutex_lock(&phb->ioda.pe_list_mutex); 921 list_add_tail(&pe->list, &phb->ioda.pe_list); 922 mutex_unlock(&phb->ioda.pe_list_mutex); 923 return pe; 924} 925 926/* 927 * There're 2 types of PCI bus sensitive PEs: One that is compromised of 928 * single PCI bus. Another one that contains the primary PCI bus and its 929 * subordinate PCI devices and buses. The second type of PE is normally 930 * orgiriated by PCIe-to-PCI bridge or PLX switch downstream ports. 931 */ 932static struct pnv_ioda_pe *pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all) 933{ 934 struct pnv_phb *phb = pci_bus_to_pnvhb(bus); 935 struct pnv_ioda_pe *pe = NULL; 936 unsigned int pe_num; 937 938 /* 939 * In partial hotplug case, the PE instance might be still alive. 940 * We should reuse it instead of allocating a new one. 941 */ 942 pe_num = phb->ioda.pe_rmap[bus->number << 8]; 943 if (WARN_ON(pe_num != IODA_INVALID_PE)) { 944 pe = &phb->ioda.pe_array[pe_num]; 945 return NULL; 946 } 947 948 /* PE number for root bus should have been reserved */ 949 if (pci_is_root_bus(bus)) 950 pe = &phb->ioda.pe_array[phb->ioda.root_pe_idx]; 951 952 /* Check if PE is determined by M64 */ 953 if (!pe) 954 pe = pnv_ioda_pick_m64_pe(bus, all); 955 956 /* The PE number isn't pinned by M64 */ 957 if (!pe) 958 pe = pnv_ioda_alloc_pe(phb, 1); 959 960 if (!pe) { 961 pr_warn("%s: Not enough PE# available for PCI bus %04x:%02x\n", 962 __func__, pci_domain_nr(bus), bus->number); 963 return NULL; 964 } 965 966 pe->flags |= (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS); 967 pe->pbus = bus; 968 pe->pdev = NULL; 969 pe->mve_number = -1; 970 pe->rid = bus->busn_res.start << 8; 971 972 if (all) 973 pe_info(pe, "Secondary bus %pad..%pad associated with PE#%x\n", 974 &bus->busn_res.start, &bus->busn_res.end, 975 pe->pe_number); 976 else 977 pe_info(pe, "Secondary bus %pad associated with PE#%x\n", 978 &bus->busn_res.start, pe->pe_number); 979 980 if (pnv_ioda_configure_pe(phb, pe)) { 981 /* XXX What do we do here ? */ 982 pnv_ioda_free_pe(pe); 983 pe->pbus = NULL; 984 return NULL; 985 } 986 987 /* Put PE to the list */ 988 list_add_tail(&pe->list, &phb->ioda.pe_list); 989 990 return pe; 991} 992 993static void pnv_pci_ioda_dma_dev_setup(struct pci_dev *pdev) 994{ 995 struct pnv_phb *phb = pci_bus_to_pnvhb(pdev->bus); 996 struct pci_dn *pdn = pci_get_pdn(pdev); 997 struct pnv_ioda_pe *pe; 998 999 /* Check if the BDFN for this device is associated with a PE yet */ 1000 pe = pnv_pci_bdfn_to_pe(phb, pci_dev_id(pdev)); 1001 if (!pe) { 1002 /* VF PEs should be pre-configured in pnv_pci_sriov_enable() */ 1003 if (WARN_ON(pdev->is_virtfn)) 1004 return; 1005 1006 pnv_pci_configure_bus(pdev->bus); 1007 pe = pnv_pci_bdfn_to_pe(phb, pci_dev_id(pdev)); 1008 pci_info(pdev, "Configured PE#%x\n", pe ? pe->pe_number : 0xfffff); 1009 1010 1011 /* 1012 * If we can't setup the IODA PE something has gone horribly 1013 * wrong and we can't enable DMA for the device. 1014 */ 1015 if (WARN_ON(!pe)) 1016 return; 1017 } else { 1018 pci_info(pdev, "Added to existing PE#%x\n", pe->pe_number); 1019 } 1020 1021 /* 1022 * We assume that bridges *probably* don't need to do any DMA so we can 1023 * skip allocating a TCE table, etc unless we get a non-bridge device. 1024 */ 1025 if (!pe->dma_setup_done && !pci_is_bridge(pdev)) { 1026 switch (phb->type) { 1027 case PNV_PHB_IODA2: 1028 pnv_pci_ioda2_setup_dma_pe(phb, pe); 1029 break; 1030 default: 1031 pr_warn("%s: No DMA for PHB#%x (type %d)\n", 1032 __func__, phb->hose->global_number, phb->type); 1033 } 1034 } 1035 1036 if (pdn) 1037 pdn->pe_number = pe->pe_number; 1038 pe->device_count++; 1039 1040 WARN_ON(get_dma_ops(&pdev->dev) != &dma_iommu_ops); 1041 pdev->dev.archdata.dma_offset = pe->tce_bypass_base; 1042 set_iommu_table_base(&pdev->dev, pe->table_group.tables[0]); 1043 1044 /* PEs with a DMA weight of zero won't have a group */ 1045 if (pe->table_group.group) 1046 iommu_add_device(&pe->table_group, &pdev->dev); 1047} 1048 1049/* 1050 * Reconfigure TVE#0 to be usable as 64-bit DMA space. 1051 * 1052 * The first 4GB of virtual memory for a PE is reserved for 32-bit accesses. 1053 * Devices can only access more than that if bit 59 of the PCI address is set 1054 * by hardware, which indicates TVE#1 should be used instead of TVE#0. 1055 * Many PCI devices are not capable of addressing that many bits, and as a 1056 * result are limited to the 4GB of virtual memory made available to 32-bit 1057 * devices in TVE#0. 1058 * 1059 * In order to work around this, reconfigure TVE#0 to be suitable for 64-bit 1060 * devices by configuring the virtual memory past the first 4GB inaccessible 1061 * by 64-bit DMAs. This should only be used by devices that want more than 1062 * 4GB, and only on PEs that have no 32-bit devices. 1063 * 1064 * Currently this will only work on PHB3 (POWER8). 1065 */ 1066static int pnv_pci_ioda_dma_64bit_bypass(struct pnv_ioda_pe *pe) 1067{ 1068 u64 window_size, table_size, tce_count, addr; 1069 struct page *table_pages; 1070 u64 tce_order = 28; /* 256MB TCEs */ 1071 __be64 *tces; 1072 s64 rc; 1073 1074 /* 1075 * Window size needs to be a power of two, but needs to account for 1076 * shifting memory by the 4GB offset required to skip 32bit space. 1077 */ 1078 window_size = roundup_pow_of_two(memory_hotplug_max() + (1ULL << 32)); 1079 tce_count = window_size >> tce_order; 1080 table_size = tce_count << 3; 1081 1082 if (table_size < PAGE_SIZE) 1083 table_size = PAGE_SIZE; 1084 1085 table_pages = alloc_pages_node(pe->phb->hose->node, GFP_KERNEL, 1086 get_order(table_size)); 1087 if (!table_pages) 1088 goto err; 1089 1090 tces = page_address(table_pages); 1091 if (!tces) 1092 goto err; 1093 1094 memset(tces, 0, table_size); 1095 1096 for (addr = 0; addr < memory_hotplug_max(); addr += (1 << tce_order)) { 1097 tces[(addr + (1ULL << 32)) >> tce_order] = 1098 cpu_to_be64(addr | TCE_PCI_READ | TCE_PCI_WRITE); 1099 } 1100 1101 rc = opal_pci_map_pe_dma_window(pe->phb->opal_id, 1102 pe->pe_number, 1103 /* reconfigure window 0 */ 1104 (pe->pe_number << 1) + 0, 1105 1, 1106 __pa(tces), 1107 table_size, 1108 1 << tce_order); 1109 if (rc == OPAL_SUCCESS) { 1110 pe_info(pe, "Using 64-bit DMA iommu bypass (through TVE#0)\n"); 1111 return 0; 1112 } 1113err: 1114 pe_err(pe, "Error configuring 64-bit DMA bypass\n"); 1115 return -EIO; 1116} 1117 1118static bool pnv_pci_ioda_iommu_bypass_supported(struct pci_dev *pdev, 1119 u64 dma_mask) 1120{ 1121 struct pnv_phb *phb = pci_bus_to_pnvhb(pdev->bus); 1122 struct pci_dn *pdn = pci_get_pdn(pdev); 1123 struct pnv_ioda_pe *pe; 1124 1125 if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE)) 1126 return false; 1127 1128 pe = &phb->ioda.pe_array[pdn->pe_number]; 1129 if (pe->tce_bypass_enabled) { 1130 u64 top = pe->tce_bypass_base + memblock_end_of_DRAM() - 1; 1131 if (dma_mask >= top) 1132 return true; 1133 } 1134 1135 /* 1136 * If the device can't set the TCE bypass bit but still wants 1137 * to access 4GB or more, on PHB3 we can reconfigure TVE#0 to 1138 * bypass the 32-bit region and be usable for 64-bit DMAs. 1139 * The device needs to be able to address all of this space. 1140 */ 1141 if (dma_mask >> 32 && 1142 dma_mask > (memory_hotplug_max() + (1ULL << 32)) && 1143 /* pe->pdev should be set if it's a single device, pe->pbus if not */ 1144 (pe->device_count == 1 || !pe->pbus) && 1145 phb->model == PNV_PHB_MODEL_PHB3) { 1146 /* Configure the bypass mode */ 1147 s64 rc = pnv_pci_ioda_dma_64bit_bypass(pe); 1148 if (rc) 1149 return false; 1150 /* 4GB offset bypasses 32-bit space */ 1151 pdev->dev.archdata.dma_offset = (1ULL << 32); 1152 return true; 1153 } 1154 1155 return false; 1156} 1157 1158static inline __be64 __iomem *pnv_ioda_get_inval_reg(struct pnv_phb *phb) 1159{ 1160 return phb->regs + 0x210; 1161} 1162 1163#ifdef CONFIG_IOMMU_API 1164/* Common for IODA1 and IODA2 */ 1165static int pnv_ioda_tce_xchg_no_kill(struct iommu_table *tbl, long index, 1166 unsigned long *hpa, enum dma_data_direction *direction) 1167{ 1168 return pnv_tce_xchg(tbl, index, hpa, direction); 1169} 1170#endif 1171 1172#define PHB3_TCE_KILL_INVAL_ALL PPC_BIT(0) 1173#define PHB3_TCE_KILL_INVAL_PE PPC_BIT(1) 1174#define PHB3_TCE_KILL_INVAL_ONE PPC_BIT(2) 1175 1176static inline void pnv_pci_phb3_tce_invalidate_pe(struct pnv_ioda_pe *pe) 1177{ 1178 /* 01xb - invalidate TCEs that match the specified PE# */ 1179 __be64 __iomem *invalidate = pnv_ioda_get_inval_reg(pe->phb); 1180 unsigned long val = PHB3_TCE_KILL_INVAL_PE | (pe->pe_number & 0xFF); 1181 1182 mb(); /* Ensure above stores are visible */ 1183 __raw_writeq_be(val, invalidate); 1184} 1185 1186static void pnv_pci_phb3_tce_invalidate(struct pnv_ioda_pe *pe, 1187 unsigned shift, unsigned long index, 1188 unsigned long npages) 1189{ 1190 __be64 __iomem *invalidate = pnv_ioda_get_inval_reg(pe->phb); 1191 unsigned long start, end, inc; 1192 1193 /* We'll invalidate DMA address in PE scope */ 1194 start = PHB3_TCE_KILL_INVAL_ONE; 1195 start |= (pe->pe_number & 0xFF); 1196 end = start; 1197 1198 /* Figure out the start, end and step */ 1199 start |= (index << shift); 1200 end |= ((index + npages - 1) << shift); 1201 inc = (0x1ull << shift); 1202 mb(); 1203 1204 while (start <= end) { 1205 __raw_writeq_be(start, invalidate); 1206 start += inc; 1207 } 1208} 1209 1210static inline void pnv_pci_ioda2_tce_invalidate_pe(struct pnv_ioda_pe *pe) 1211{ 1212 struct pnv_phb *phb = pe->phb; 1213 1214 if (phb->model == PNV_PHB_MODEL_PHB3 && phb->regs) 1215 pnv_pci_phb3_tce_invalidate_pe(pe); 1216 else 1217 opal_pci_tce_kill(phb->opal_id, OPAL_PCI_TCE_KILL_PE, 1218 pe->pe_number, 0, 0, 0); 1219} 1220 1221static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl, 1222 unsigned long index, unsigned long npages) 1223{ 1224 struct iommu_table_group_link *tgl; 1225 1226 list_for_each_entry_lockless(tgl, &tbl->it_group_list, next) { 1227 struct pnv_ioda_pe *pe = container_of(tgl->table_group, 1228 struct pnv_ioda_pe, table_group); 1229 struct pnv_phb *phb = pe->phb; 1230 unsigned int shift = tbl->it_page_shift; 1231 1232 if (phb->model == PNV_PHB_MODEL_PHB3 && phb->regs) 1233 pnv_pci_phb3_tce_invalidate(pe, shift, 1234 index, npages); 1235 else 1236 opal_pci_tce_kill(phb->opal_id, 1237 OPAL_PCI_TCE_KILL_PAGES, 1238 pe->pe_number, 1u << shift, 1239 index << shift, npages); 1240 } 1241} 1242 1243static int pnv_ioda2_tce_build(struct iommu_table *tbl, long index, 1244 long npages, unsigned long uaddr, 1245 enum dma_data_direction direction, 1246 unsigned long attrs) 1247{ 1248 int ret = pnv_tce_build(tbl, index, npages, uaddr, direction, 1249 attrs); 1250 1251 if (!ret) 1252 pnv_pci_ioda2_tce_invalidate(tbl, index, npages); 1253 1254 return ret; 1255} 1256 1257static void pnv_ioda2_tce_free(struct iommu_table *tbl, long index, 1258 long npages) 1259{ 1260 pnv_tce_free(tbl, index, npages); 1261 1262 pnv_pci_ioda2_tce_invalidate(tbl, index, npages); 1263} 1264 1265static struct iommu_table_ops pnv_ioda2_iommu_ops = { 1266 .set = pnv_ioda2_tce_build, 1267#ifdef CONFIG_IOMMU_API 1268 .xchg_no_kill = pnv_ioda_tce_xchg_no_kill, 1269 .tce_kill = pnv_pci_ioda2_tce_invalidate, 1270 .useraddrptr = pnv_tce_useraddrptr, 1271#endif 1272 .clear = pnv_ioda2_tce_free, 1273 .get = pnv_tce_get, 1274 .free = pnv_pci_ioda2_table_free_pages, 1275}; 1276 1277static long pnv_pci_ioda2_set_window(struct iommu_table_group *table_group, 1278 int num, struct iommu_table *tbl) 1279{ 1280 struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe, 1281 table_group); 1282 struct pnv_phb *phb = pe->phb; 1283 int64_t rc; 1284 const unsigned long size = tbl->it_indirect_levels ? 1285 tbl->it_level_size : tbl->it_size; 1286 const __u64 start_addr = tbl->it_offset << tbl->it_page_shift; 1287 const __u64 win_size = tbl->it_size << tbl->it_page_shift; 1288 1289 pe_info(pe, "Setting up window#%d %llx..%llx pg=%lx\n", 1290 num, start_addr, start_addr + win_size - 1, 1291 IOMMU_PAGE_SIZE(tbl)); 1292 1293 /* 1294 * Map TCE table through TVT. The TVE index is the PE number 1295 * shifted by 1 bit for 32-bits DMA space. 1296 */ 1297 rc = opal_pci_map_pe_dma_window(phb->opal_id, 1298 pe->pe_number, 1299 (pe->pe_number << 1) + num, 1300 tbl->it_indirect_levels + 1, 1301 __pa(tbl->it_base), 1302 size << 3, 1303 IOMMU_PAGE_SIZE(tbl)); 1304 if (rc) { 1305 pe_err(pe, "Failed to configure TCE table, err %lld\n", rc); 1306 return rc; 1307 } 1308 1309 pnv_pci_link_table_and_group(phb->hose->node, num, 1310 tbl, &pe->table_group); 1311 pnv_pci_ioda2_tce_invalidate_pe(pe); 1312 1313 return 0; 1314} 1315 1316static void pnv_pci_ioda2_set_bypass(struct pnv_ioda_pe *pe, bool enable) 1317{ 1318 uint16_t window_id = (pe->pe_number << 1 ) + 1; 1319 int64_t rc; 1320 1321 pe_info(pe, "%sabling 64-bit DMA bypass\n", enable ? "En" : "Dis"); 1322 if (enable) { 1323 phys_addr_t top = memblock_end_of_DRAM(); 1324 1325 top = roundup_pow_of_two(top); 1326 rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id, 1327 pe->pe_number, 1328 window_id, 1329 pe->tce_bypass_base, 1330 top); 1331 } else { 1332 rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id, 1333 pe->pe_number, 1334 window_id, 1335 pe->tce_bypass_base, 1336 0); 1337 } 1338 if (rc) 1339 pe_err(pe, "OPAL error %lld configuring bypass window\n", rc); 1340 else 1341 pe->tce_bypass_enabled = enable; 1342} 1343 1344static long pnv_pci_ioda2_create_table(struct iommu_table_group *table_group, 1345 int num, __u32 page_shift, __u64 window_size, __u32 levels, 1346 bool alloc_userspace_copy, struct iommu_table **ptbl) 1347{ 1348 struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe, 1349 table_group); 1350 int nid = pe->phb->hose->node; 1351 __u64 bus_offset = num ? pe->tce_bypass_base : table_group->tce32_start; 1352 long ret; 1353 struct iommu_table *tbl; 1354 1355 tbl = pnv_pci_table_alloc(nid); 1356 if (!tbl) 1357 return -ENOMEM; 1358 1359 tbl->it_ops = &pnv_ioda2_iommu_ops; 1360 1361 ret = pnv_pci_ioda2_table_alloc_pages(nid, 1362 bus_offset, page_shift, window_size, 1363 levels, alloc_userspace_copy, tbl); 1364 if (ret) { 1365 iommu_tce_table_put(tbl); 1366 return ret; 1367 } 1368 1369 *ptbl = tbl; 1370 1371 return 0; 1372} 1373 1374static long pnv_pci_ioda2_setup_default_config(struct pnv_ioda_pe *pe) 1375{ 1376 struct iommu_table *tbl = NULL; 1377 long rc; 1378 unsigned long res_start, res_end; 1379 1380 /* 1381 * crashkernel= specifies the kdump kernel's maximum memory at 1382 * some offset and there is no guaranteed the result is a power 1383 * of 2, which will cause errors later. 1384 */ 1385 const u64 max_memory = __rounddown_pow_of_two(memory_hotplug_max()); 1386 1387 /* 1388 * In memory constrained environments, e.g. kdump kernel, the 1389 * DMA window can be larger than available memory, which will 1390 * cause errors later. 1391 */ 1392 const u64 maxblock = 1UL << (PAGE_SHIFT + MAX_PAGE_ORDER); 1393 1394 /* 1395 * We create the default window as big as we can. The constraint is 1396 * the max order of allocation possible. The TCE table is likely to 1397 * end up being multilevel and with on-demand allocation in place, 1398 * the initial use is not going to be huge as the default window aims 1399 * to support crippled devices (i.e. not fully 64bit DMAble) only. 1400 */ 1401 /* iommu_table::it_map uses 1 bit per IOMMU page, hence 8 */ 1402 const u64 window_size = min((maxblock * 8) << PAGE_SHIFT, max_memory); 1403 /* Each TCE level cannot exceed maxblock so go multilevel if needed */ 1404 unsigned long tces_order = ilog2(window_size >> PAGE_SHIFT); 1405 unsigned long tcelevel_order = ilog2(maxblock >> 3); 1406 unsigned int levels = tces_order / tcelevel_order; 1407 1408 if (tces_order % tcelevel_order) 1409 levels += 1; 1410 /* 1411 * We try to stick to default levels (which is >1 at the moment) in 1412 * order to save memory by relying on on-demain TCE level allocation. 1413 */ 1414 levels = max_t(unsigned int, levels, POWERNV_IOMMU_DEFAULT_LEVELS); 1415 1416 rc = pnv_pci_ioda2_create_table(&pe->table_group, 0, PAGE_SHIFT, 1417 window_size, levels, false, &tbl); 1418 if (rc) { 1419 pe_err(pe, "Failed to create 32-bit TCE table, err %ld", 1420 rc); 1421 return rc; 1422 } 1423 1424 /* We use top part of 32bit space for MMIO so exclude it from DMA */ 1425 res_start = 0; 1426 res_end = 0; 1427 if (window_size > pe->phb->ioda.m32_pci_base) { 1428 res_start = pe->phb->ioda.m32_pci_base >> tbl->it_page_shift; 1429 res_end = min(window_size, SZ_4G) >> tbl->it_page_shift; 1430 } 1431 1432 tbl->it_index = (pe->phb->hose->global_number << 16) | pe->pe_number; 1433 if (iommu_init_table(tbl, pe->phb->hose->node, res_start, res_end)) 1434 rc = pnv_pci_ioda2_set_window(&pe->table_group, 0, tbl); 1435 else 1436 rc = -ENOMEM; 1437 if (rc) { 1438 pe_err(pe, "Failed to configure 32-bit TCE table, err %ld\n", rc); 1439 iommu_tce_table_put(tbl); 1440 tbl = NULL; /* This clears iommu_table_base below */ 1441 } 1442 if (!pnv_iommu_bypass_disabled) 1443 pnv_pci_ioda2_set_bypass(pe, true); 1444 1445 /* 1446 * Set table base for the case of IOMMU DMA use. Usually this is done 1447 * from dma_dev_setup() which is not called when a device is returned 1448 * from VFIO so do it here. 1449 */ 1450 if (pe->pdev) 1451 set_iommu_table_base(&pe->pdev->dev, tbl); 1452 1453 return 0; 1454} 1455 1456static long pnv_pci_ioda2_unset_window(struct iommu_table_group *table_group, 1457 int num) 1458{ 1459 struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe, 1460 table_group); 1461 struct pnv_phb *phb = pe->phb; 1462 long ret; 1463 1464 pe_info(pe, "Removing DMA window #%d\n", num); 1465 1466 ret = opal_pci_map_pe_dma_window(phb->opal_id, pe->pe_number, 1467 (pe->pe_number << 1) + num, 1468 0/* levels */, 0/* table address */, 1469 0/* table size */, 0/* page size */); 1470 if (ret) 1471 pe_warn(pe, "Unmapping failed, ret = %ld\n", ret); 1472 else 1473 pnv_pci_ioda2_tce_invalidate_pe(pe); 1474 1475 pnv_pci_unlink_table_and_group(table_group->tables[num], table_group); 1476 1477 return ret; 1478} 1479 1480#ifdef CONFIG_IOMMU_API 1481unsigned long pnv_pci_ioda2_get_table_size(__u32 page_shift, 1482 __u64 window_size, __u32 levels) 1483{ 1484 unsigned long bytes = 0; 1485 const unsigned window_shift = ilog2(window_size); 1486 unsigned entries_shift = window_shift - page_shift; 1487 unsigned table_shift = entries_shift + 3; 1488 unsigned long tce_table_size = max(0x1000UL, 1UL << table_shift); 1489 unsigned long direct_table_size; 1490 1491 if (!levels || (levels > POWERNV_IOMMU_MAX_LEVELS) || 1492 !is_power_of_2(window_size)) 1493 return 0; 1494 1495 /* Calculate a direct table size from window_size and levels */ 1496 entries_shift = (entries_shift + levels - 1) / levels; 1497 table_shift = entries_shift + 3; 1498 table_shift = max_t(unsigned, table_shift, PAGE_SHIFT); 1499 direct_table_size = 1UL << table_shift; 1500 1501 for ( ; levels; --levels) { 1502 bytes += ALIGN(tce_table_size, direct_table_size); 1503 1504 tce_table_size /= direct_table_size; 1505 tce_table_size <<= 3; 1506 tce_table_size = max_t(unsigned long, 1507 tce_table_size, direct_table_size); 1508 } 1509 1510 return bytes + bytes; /* one for HW table, one for userspace copy */ 1511} 1512 1513static long pnv_pci_ioda2_create_table_userspace( 1514 struct iommu_table_group *table_group, 1515 int num, __u32 page_shift, __u64 window_size, __u32 levels, 1516 struct iommu_table **ptbl) 1517{ 1518 long ret = pnv_pci_ioda2_create_table(table_group, 1519 num, page_shift, window_size, levels, true, ptbl); 1520 1521 if (!ret) 1522 (*ptbl)->it_allocated_size = pnv_pci_ioda2_get_table_size( 1523 page_shift, window_size, levels); 1524 return ret; 1525} 1526 1527static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus) 1528{ 1529 struct pci_dev *dev; 1530 1531 list_for_each_entry(dev, &bus->devices, bus_list) { 1532 set_iommu_table_base(&dev->dev, pe->table_group.tables[0]); 1533 dev->dev.archdata.dma_offset = pe->tce_bypass_base; 1534 1535 if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate) 1536 pnv_ioda_setup_bus_dma(pe, dev->subordinate); 1537 } 1538} 1539 1540static long pnv_ioda2_take_ownership(struct iommu_table_group *table_group) 1541{ 1542 struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe, 1543 table_group); 1544 /* Store @tbl as pnv_pci_ioda2_unset_window() resets it */ 1545 struct iommu_table *tbl = pe->table_group.tables[0]; 1546 1547 /* 1548 * iommu_ops transfers the ownership per a device and we mode 1549 * the group ownership with the first device in the group. 1550 */ 1551 if (!tbl) 1552 return 0; 1553 1554 pnv_pci_ioda2_set_bypass(pe, false); 1555 pnv_pci_ioda2_unset_window(&pe->table_group, 0); 1556 if (pe->pbus) 1557 pnv_ioda_setup_bus_dma(pe, pe->pbus); 1558 else if (pe->pdev) 1559 set_iommu_table_base(&pe->pdev->dev, NULL); 1560 iommu_tce_table_put(tbl); 1561 1562 return 0; 1563} 1564 1565static void pnv_ioda2_release_ownership(struct iommu_table_group *table_group) 1566{ 1567 struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe, 1568 table_group); 1569 1570 /* See the comment about iommu_ops above */ 1571 if (pe->table_group.tables[0]) 1572 return; 1573 pnv_pci_ioda2_setup_default_config(pe); 1574 if (pe->pbus) 1575 pnv_ioda_setup_bus_dma(pe, pe->pbus); 1576} 1577 1578static struct iommu_table_group_ops pnv_pci_ioda2_ops = { 1579 .get_table_size = pnv_pci_ioda2_get_table_size, 1580 .create_table = pnv_pci_ioda2_create_table_userspace, 1581 .set_window = pnv_pci_ioda2_set_window, 1582 .unset_window = pnv_pci_ioda2_unset_window, 1583 .take_ownership = pnv_ioda2_take_ownership, 1584 .release_ownership = pnv_ioda2_release_ownership, 1585}; 1586#endif 1587 1588void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, 1589 struct pnv_ioda_pe *pe) 1590{ 1591 int64_t rc; 1592 1593 /* TVE #1 is selected by PCI address bit 59 */ 1594 pe->tce_bypass_base = 1ull << 59; 1595 1596 /* The PE will reserve all possible 32-bits space */ 1597 pe_info(pe, "Setting up 32-bit TCE table at 0..%08x\n", 1598 phb->ioda.m32_pci_base); 1599 1600 /* Setup linux iommu table */ 1601 pe->table_group.tce32_start = 0; 1602 pe->table_group.tce32_size = phb->ioda.m32_pci_base; 1603 pe->table_group.max_dynamic_windows_supported = 1604 IOMMU_TABLE_GROUP_MAX_TABLES; 1605 pe->table_group.max_levels = POWERNV_IOMMU_MAX_LEVELS; 1606 pe->table_group.pgsizes = pnv_ioda_parse_tce_sizes(phb); 1607 1608 rc = pnv_pci_ioda2_setup_default_config(pe); 1609 if (rc) 1610 return; 1611 1612#ifdef CONFIG_IOMMU_API 1613 pe->table_group.ops = &pnv_pci_ioda2_ops; 1614 iommu_register_group(&pe->table_group, phb->hose->global_number, 1615 pe->pe_number); 1616#endif 1617 pe->dma_setup_done = true; 1618} 1619 1620/* 1621 * Called from KVM in real mode to EOI passthru interrupts. The ICP 1622 * EOI is handled directly in KVM in kvmppc_deliver_irq_passthru(). 1623 * 1624 * The IRQ data is mapped in the PCI-MSI domain and the EOI OPAL call 1625 * needs an HW IRQ number mapped in the XICS IRQ domain. The HW IRQ 1626 * numbers of the in-the-middle MSI domain are vector numbers and it's 1627 * good enough for OPAL. Use that. 1628 */ 1629int64_t pnv_opal_pci_msi_eoi(struct irq_data *d) 1630{ 1631 struct pci_controller *hose = irq_data_get_irq_chip_data(d->parent_data); 1632 struct pnv_phb *phb = hose->private_data; 1633 1634 return opal_pci_msi_eoi(phb->opal_id, d->parent_data->hwirq); 1635} 1636 1637/* 1638 * The IRQ data is mapped in the XICS domain, with OPAL HW IRQ numbers 1639 */ 1640static void pnv_ioda2_msi_eoi(struct irq_data *d) 1641{ 1642 int64_t rc; 1643 unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d); 1644 struct pci_controller *hose = irq_data_get_irq_chip_data(d); 1645 struct pnv_phb *phb = hose->private_data; 1646 1647 rc = opal_pci_msi_eoi(phb->opal_id, hw_irq); 1648 WARN_ON_ONCE(rc); 1649 1650 icp_native_eoi(d); 1651} 1652 1653/* P8/CXL only */ 1654void pnv_set_msi_irq_chip(struct pnv_phb *phb, unsigned int virq) 1655{ 1656 struct irq_data *idata; 1657 struct irq_chip *ichip; 1658 1659 /* The MSI EOI OPAL call is only needed on PHB3 */ 1660 if (phb->model != PNV_PHB_MODEL_PHB3) 1661 return; 1662 1663 if (!phb->ioda.irq_chip_init) { 1664 /* 1665 * First time we setup an MSI IRQ, we need to setup the 1666 * corresponding IRQ chip to route correctly. 1667 */ 1668 idata = irq_get_irq_data(virq); 1669 ichip = irq_data_get_irq_chip(idata); 1670 phb->ioda.irq_chip_init = 1; 1671 phb->ioda.irq_chip = *ichip; 1672 phb->ioda.irq_chip.irq_eoi = pnv_ioda2_msi_eoi; 1673 } 1674 irq_set_chip(virq, &phb->ioda.irq_chip); 1675 irq_set_chip_data(virq, phb->hose); 1676} 1677 1678static struct irq_chip pnv_pci_msi_irq_chip; 1679 1680/* 1681 * Returns true iff chip is something that we could call 1682 * pnv_opal_pci_msi_eoi for. 1683 */ 1684bool is_pnv_opal_msi(struct irq_chip *chip) 1685{ 1686 return chip == &pnv_pci_msi_irq_chip; 1687} 1688EXPORT_SYMBOL_GPL(is_pnv_opal_msi); 1689 1690static int __pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev, 1691 unsigned int xive_num, 1692 unsigned int is_64, struct msi_msg *msg) 1693{ 1694 struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev); 1695 __be32 data; 1696 int rc; 1697 1698 dev_dbg(&dev->dev, "%s: setup %s-bit MSI for vector #%d\n", __func__, 1699 is_64 ? "64" : "32", xive_num); 1700 1701 /* No PE assigned ? bail out ... no MSI for you ! */ 1702 if (pe == NULL) 1703 return -ENXIO; 1704 1705 /* Check if we have an MVE */ 1706 if (pe->mve_number < 0) 1707 return -ENXIO; 1708 1709 /* Force 32-bit MSI on some broken devices */ 1710 if (dev->no_64bit_msi) 1711 is_64 = 0; 1712 1713 /* Assign XIVE to PE */ 1714 rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num); 1715 if (rc) { 1716 pr_warn("%s: OPAL error %d setting XIVE %d PE\n", 1717 pci_name(dev), rc, xive_num); 1718 return -EIO; 1719 } 1720 1721 if (is_64) { 1722 __be64 addr64; 1723 1724 rc = opal_get_msi_64(phb->opal_id, pe->mve_number, xive_num, 1, 1725 &addr64, &data); 1726 if (rc) { 1727 pr_warn("%s: OPAL error %d getting 64-bit MSI data\n", 1728 pci_name(dev), rc); 1729 return -EIO; 1730 } 1731 msg->address_hi = be64_to_cpu(addr64) >> 32; 1732 msg->address_lo = be64_to_cpu(addr64) & 0xfffffffful; 1733 } else { 1734 __be32 addr32; 1735 1736 rc = opal_get_msi_32(phb->opal_id, pe->mve_number, xive_num, 1, 1737 &addr32, &data); 1738 if (rc) { 1739 pr_warn("%s: OPAL error %d getting 32-bit MSI data\n", 1740 pci_name(dev), rc); 1741 return -EIO; 1742 } 1743 msg->address_hi = 0; 1744 msg->address_lo = be32_to_cpu(addr32); 1745 } 1746 msg->data = be32_to_cpu(data); 1747 1748 return 0; 1749} 1750 1751/* 1752 * The msi_free() op is called before irq_domain_free_irqs_top() when 1753 * the handler data is still available. Use that to clear the XIVE 1754 * controller. 1755 */ 1756static void pnv_msi_ops_msi_free(struct irq_domain *domain, 1757 struct msi_domain_info *info, 1758 unsigned int irq) 1759{ 1760 if (xive_enabled()) 1761 xive_irq_free_data(irq); 1762} 1763 1764static struct msi_domain_ops pnv_pci_msi_domain_ops = { 1765 .msi_free = pnv_msi_ops_msi_free, 1766}; 1767 1768static void pnv_msi_shutdown(struct irq_data *d) 1769{ 1770 d = d->parent_data; 1771 if (d->chip->irq_shutdown) 1772 d->chip->irq_shutdown(d); 1773} 1774 1775static void pnv_msi_mask(struct irq_data *d) 1776{ 1777 pci_msi_mask_irq(d); 1778 irq_chip_mask_parent(d); 1779} 1780 1781static void pnv_msi_unmask(struct irq_data *d) 1782{ 1783 pci_msi_unmask_irq(d); 1784 irq_chip_unmask_parent(d); 1785} 1786 1787static struct irq_chip pnv_pci_msi_irq_chip = { 1788 .name = "PNV-PCI-MSI", 1789 .irq_shutdown = pnv_msi_shutdown, 1790 .irq_mask = pnv_msi_mask, 1791 .irq_unmask = pnv_msi_unmask, 1792 .irq_eoi = irq_chip_eoi_parent, 1793}; 1794 1795static struct msi_domain_info pnv_msi_domain_info = { 1796 .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | 1797 MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX), 1798 .ops = &pnv_pci_msi_domain_ops, 1799 .chip = &pnv_pci_msi_irq_chip, 1800}; 1801 1802static void pnv_msi_compose_msg(struct irq_data *d, struct msi_msg *msg) 1803{ 1804 struct msi_desc *entry = irq_data_get_msi_desc(d); 1805 struct pci_dev *pdev = msi_desc_to_pci_dev(entry); 1806 struct pci_controller *hose = irq_data_get_irq_chip_data(d); 1807 struct pnv_phb *phb = hose->private_data; 1808 int rc; 1809 1810 rc = __pnv_pci_ioda_msi_setup(phb, pdev, d->hwirq, 1811 entry->pci.msi_attrib.is_64, msg); 1812 if (rc) 1813 dev_err(&pdev->dev, "Failed to setup %s-bit MSI #%ld : %d\n", 1814 entry->pci.msi_attrib.is_64 ? "64" : "32", d->hwirq, rc); 1815} 1816 1817/* 1818 * The IRQ data is mapped in the MSI domain in which HW IRQ numbers 1819 * correspond to vector numbers. 1820 */ 1821static void pnv_msi_eoi(struct irq_data *d) 1822{ 1823 struct pci_controller *hose = irq_data_get_irq_chip_data(d); 1824 struct pnv_phb *phb = hose->private_data; 1825 1826 if (phb->model == PNV_PHB_MODEL_PHB3) { 1827 /* 1828 * The EOI OPAL call takes an OPAL HW IRQ number but 1829 * since it is translated into a vector number in 1830 * OPAL, use that directly. 1831 */ 1832 WARN_ON_ONCE(opal_pci_msi_eoi(phb->opal_id, d->hwirq)); 1833 } 1834 1835 irq_chip_eoi_parent(d); 1836} 1837 1838static struct irq_chip pnv_msi_irq_chip = { 1839 .name = "PNV-MSI", 1840 .irq_shutdown = pnv_msi_shutdown, 1841 .irq_mask = irq_chip_mask_parent, 1842 .irq_unmask = irq_chip_unmask_parent, 1843 .irq_eoi = pnv_msi_eoi, 1844 .irq_set_affinity = irq_chip_set_affinity_parent, 1845 .irq_compose_msi_msg = pnv_msi_compose_msg, 1846}; 1847 1848static int pnv_irq_parent_domain_alloc(struct irq_domain *domain, 1849 unsigned int virq, int hwirq) 1850{ 1851 struct irq_fwspec parent_fwspec; 1852 int ret; 1853 1854 parent_fwspec.fwnode = domain->parent->fwnode; 1855 parent_fwspec.param_count = 2; 1856 parent_fwspec.param[0] = hwirq; 1857 parent_fwspec.param[1] = IRQ_TYPE_EDGE_RISING; 1858 1859 ret = irq_domain_alloc_irqs_parent(domain, virq, 1, &parent_fwspec); 1860 if (ret) 1861 return ret; 1862 1863 return 0; 1864} 1865 1866static int pnv_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, 1867 unsigned int nr_irqs, void *arg) 1868{ 1869 struct pci_controller *hose = domain->host_data; 1870 struct pnv_phb *phb = hose->private_data; 1871 msi_alloc_info_t *info = arg; 1872 struct pci_dev *pdev = msi_desc_to_pci_dev(info->desc); 1873 int hwirq; 1874 int i, ret; 1875 1876 hwirq = msi_bitmap_alloc_hwirqs(&phb->msi_bmp, nr_irqs); 1877 if (hwirq < 0) { 1878 dev_warn(&pdev->dev, "failed to find a free MSI\n"); 1879 return -ENOSPC; 1880 } 1881 1882 dev_dbg(&pdev->dev, "%s bridge %pOF %d/%x #%d\n", __func__, 1883 hose->dn, virq, hwirq, nr_irqs); 1884 1885 for (i = 0; i < nr_irqs; i++) { 1886 ret = pnv_irq_parent_domain_alloc(domain, virq + i, 1887 phb->msi_base + hwirq + i); 1888 if (ret) 1889 goto out; 1890 1891 irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i, 1892 &pnv_msi_irq_chip, hose); 1893 } 1894 1895 return 0; 1896 1897out: 1898 irq_domain_free_irqs_parent(domain, virq, i - 1); 1899 msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq, nr_irqs); 1900 return ret; 1901} 1902 1903static void pnv_irq_domain_free(struct irq_domain *domain, unsigned int virq, 1904 unsigned int nr_irqs) 1905{ 1906 struct irq_data *d = irq_domain_get_irq_data(domain, virq); 1907 struct pci_controller *hose = irq_data_get_irq_chip_data(d); 1908 struct pnv_phb *phb = hose->private_data; 1909 1910 pr_debug("%s bridge %pOF %d/%lx #%d\n", __func__, hose->dn, 1911 virq, d->hwirq, nr_irqs); 1912 1913 msi_bitmap_free_hwirqs(&phb->msi_bmp, d->hwirq, nr_irqs); 1914 /* XIVE domain is cleared through ->msi_free() */ 1915} 1916 1917static const struct irq_domain_ops pnv_irq_domain_ops = { 1918 .alloc = pnv_irq_domain_alloc, 1919 .free = pnv_irq_domain_free, 1920}; 1921 1922static int __init pnv_msi_allocate_domains(struct pci_controller *hose, unsigned int count) 1923{ 1924 struct pnv_phb *phb = hose->private_data; 1925 struct irq_domain *parent = irq_get_default_host(); 1926 1927 hose->fwnode = irq_domain_alloc_named_id_fwnode("PNV-MSI", phb->opal_id); 1928 if (!hose->fwnode) 1929 return -ENOMEM; 1930 1931 hose->dev_domain = irq_domain_create_hierarchy(parent, 0, count, 1932 hose->fwnode, 1933 &pnv_irq_domain_ops, hose); 1934 if (!hose->dev_domain) { 1935 pr_err("PCI: failed to create IRQ domain bridge %pOF (domain %d)\n", 1936 hose->dn, hose->global_number); 1937 irq_domain_free_fwnode(hose->fwnode); 1938 return -ENOMEM; 1939 } 1940 1941 hose->msi_domain = pci_msi_create_irq_domain(of_node_to_fwnode(hose->dn), 1942 &pnv_msi_domain_info, 1943 hose->dev_domain); 1944 if (!hose->msi_domain) { 1945 pr_err("PCI: failed to create MSI IRQ domain bridge %pOF (domain %d)\n", 1946 hose->dn, hose->global_number); 1947 irq_domain_free_fwnode(hose->fwnode); 1948 irq_domain_remove(hose->dev_domain); 1949 return -ENOMEM; 1950 } 1951 1952 return 0; 1953} 1954 1955static void __init pnv_pci_init_ioda_msis(struct pnv_phb *phb) 1956{ 1957 unsigned int count; 1958 const __be32 *prop = of_get_property(phb->hose->dn, 1959 "ibm,opal-msi-ranges", NULL); 1960 if (!prop) { 1961 /* BML Fallback */ 1962 prop = of_get_property(phb->hose->dn, "msi-ranges", NULL); 1963 } 1964 if (!prop) 1965 return; 1966 1967 phb->msi_base = be32_to_cpup(prop); 1968 count = be32_to_cpup(prop + 1); 1969 if (msi_bitmap_alloc(&phb->msi_bmp, count, phb->hose->dn)) { 1970 pr_err("PCI %d: Failed to allocate MSI bitmap !\n", 1971 phb->hose->global_number); 1972 return; 1973 } 1974 1975 pr_info(" Allocated bitmap for %d MSIs (base IRQ 0x%x)\n", 1976 count, phb->msi_base); 1977 1978 pnv_msi_allocate_domains(phb->hose, count); 1979} 1980 1981static void pnv_ioda_setup_pe_res(struct pnv_ioda_pe *pe, 1982 struct resource *res) 1983{ 1984 struct pnv_phb *phb = pe->phb; 1985 struct pci_bus_region region; 1986 int index; 1987 int64_t rc; 1988 1989 if (!res || !res->flags || res->start > res->end || 1990 res->flags & IORESOURCE_UNSET) 1991 return; 1992 1993 if (res->flags & IORESOURCE_IO) { 1994 region.start = res->start - phb->ioda.io_pci_base; 1995 region.end = res->end - phb->ioda.io_pci_base; 1996 index = region.start / phb->ioda.io_segsize; 1997 1998 while (index < phb->ioda.total_pe_num && 1999 region.start <= region.end) { 2000 phb->ioda.io_segmap[index] = pe->pe_number; 2001 rc = opal_pci_map_pe_mmio_window(phb->opal_id, 2002 pe->pe_number, OPAL_IO_WINDOW_TYPE, 0, index); 2003 if (rc != OPAL_SUCCESS) { 2004 pr_err("%s: Error %lld mapping IO segment#%d to PE#%x\n", 2005 __func__, rc, index, pe->pe_number); 2006 break; 2007 } 2008 2009 region.start += phb->ioda.io_segsize; 2010 index++; 2011 } 2012 } else if ((res->flags & IORESOURCE_MEM) && 2013 !pnv_pci_is_m64(phb, res)) { 2014 region.start = res->start - 2015 phb->hose->mem_offset[0] - 2016 phb->ioda.m32_pci_base; 2017 region.end = res->end - 2018 phb->hose->mem_offset[0] - 2019 phb->ioda.m32_pci_base; 2020 index = region.start / phb->ioda.m32_segsize; 2021 2022 while (index < phb->ioda.total_pe_num && 2023 region.start <= region.end) { 2024 phb->ioda.m32_segmap[index] = pe->pe_number; 2025 rc = opal_pci_map_pe_mmio_window(phb->opal_id, 2026 pe->pe_number, OPAL_M32_WINDOW_TYPE, 0, index); 2027 if (rc != OPAL_SUCCESS) { 2028 pr_err("%s: Error %lld mapping M32 segment#%d to PE#%x", 2029 __func__, rc, index, pe->pe_number); 2030 break; 2031 } 2032 2033 region.start += phb->ioda.m32_segsize; 2034 index++; 2035 } 2036 } 2037} 2038 2039/* 2040 * This function is supposed to be called on basis of PE from top 2041 * to bottom style. So the I/O or MMIO segment assigned to 2042 * parent PE could be overridden by its child PEs if necessary. 2043 */ 2044static void pnv_ioda_setup_pe_seg(struct pnv_ioda_pe *pe) 2045{ 2046 struct pci_dev *pdev; 2047 int i; 2048 2049 /* 2050 * NOTE: We only care PCI bus based PE for now. For PCI 2051 * device based PE, for example SRIOV sensitive VF should 2052 * be figured out later. 2053 */ 2054 BUG_ON(!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL))); 2055 2056 list_for_each_entry(pdev, &pe->pbus->devices, bus_list) { 2057 for (i = 0; i <= PCI_ROM_RESOURCE; i++) 2058 pnv_ioda_setup_pe_res(pe, &pdev->resource[i]); 2059 2060 /* 2061 * If the PE contains all subordinate PCI buses, the 2062 * windows of the child bridges should be mapped to 2063 * the PE as well. 2064 */ 2065 if (!(pe->flags & PNV_IODA_PE_BUS_ALL) || !pci_is_bridge(pdev)) 2066 continue; 2067 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) 2068 pnv_ioda_setup_pe_res(pe, 2069 &pdev->resource[PCI_BRIDGE_RESOURCES + i]); 2070 } 2071} 2072 2073#ifdef CONFIG_DEBUG_FS 2074static int pnv_pci_diag_data_set(void *data, u64 val) 2075{ 2076 struct pnv_phb *phb = data; 2077 s64 ret; 2078 2079 /* Retrieve the diag data from firmware */ 2080 ret = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag_data, 2081 phb->diag_data_size); 2082 if (ret != OPAL_SUCCESS) 2083 return -EIO; 2084 2085 /* Print the diag data to the kernel log */ 2086 pnv_pci_dump_phb_diag_data(phb->hose, phb->diag_data); 2087 return 0; 2088} 2089 2090DEFINE_DEBUGFS_ATTRIBUTE(pnv_pci_diag_data_fops, NULL, pnv_pci_diag_data_set, 2091 "%llu\n"); 2092 2093static int pnv_pci_ioda_pe_dump(void *data, u64 val) 2094{ 2095 struct pnv_phb *phb = data; 2096 int pe_num; 2097 2098 for (pe_num = 0; pe_num < phb->ioda.total_pe_num; pe_num++) { 2099 struct pnv_ioda_pe *pe = &phb->ioda.pe_array[pe_num]; 2100 2101 if (!test_bit(pe_num, phb->ioda.pe_alloc)) 2102 continue; 2103 2104 pe_warn(pe, "rid: %04x dev count: %2d flags: %s%s%s%s%s%s\n", 2105 pe->rid, pe->device_count, 2106 (pe->flags & PNV_IODA_PE_DEV) ? "dev " : "", 2107 (pe->flags & PNV_IODA_PE_BUS) ? "bus " : "", 2108 (pe->flags & PNV_IODA_PE_BUS_ALL) ? "all " : "", 2109 (pe->flags & PNV_IODA_PE_MASTER) ? "master " : "", 2110 (pe->flags & PNV_IODA_PE_SLAVE) ? "slave " : "", 2111 (pe->flags & PNV_IODA_PE_VF) ? "vf " : ""); 2112 } 2113 2114 return 0; 2115} 2116 2117DEFINE_DEBUGFS_ATTRIBUTE(pnv_pci_ioda_pe_dump_fops, NULL, 2118 pnv_pci_ioda_pe_dump, "%llu\n"); 2119 2120#endif /* CONFIG_DEBUG_FS */ 2121 2122static void pnv_pci_ioda_create_dbgfs(void) 2123{ 2124#ifdef CONFIG_DEBUG_FS 2125 struct pci_controller *hose, *tmp; 2126 struct pnv_phb *phb; 2127 char name[16]; 2128 2129 list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { 2130 phb = hose->private_data; 2131 2132 sprintf(name, "PCI%04x", hose->global_number); 2133 phb->dbgfs = debugfs_create_dir(name, arch_debugfs_dir); 2134 2135 debugfs_create_file_unsafe("dump_diag_regs", 0200, phb->dbgfs, 2136 phb, &pnv_pci_diag_data_fops); 2137 debugfs_create_file_unsafe("dump_ioda_pe_state", 0200, phb->dbgfs, 2138 phb, &pnv_pci_ioda_pe_dump_fops); 2139 } 2140#endif /* CONFIG_DEBUG_FS */ 2141} 2142 2143static void pnv_pci_enable_bridge(struct pci_bus *bus) 2144{ 2145 struct pci_dev *dev = bus->self; 2146 struct pci_bus *child; 2147 2148 /* Empty bus ? bail */ 2149 if (list_empty(&bus->devices)) 2150 return; 2151 2152 /* 2153 * If there's a bridge associated with that bus enable it. This works 2154 * around races in the generic code if the enabling is done during 2155 * parallel probing. This can be removed once those races have been 2156 * fixed. 2157 */ 2158 if (dev) { 2159 int rc = pci_enable_device(dev); 2160 if (rc) 2161 pci_err(dev, "Error enabling bridge (%d)\n", rc); 2162 pci_set_master(dev); 2163 } 2164 2165 /* Perform the same to child busses */ 2166 list_for_each_entry(child, &bus->children, node) 2167 pnv_pci_enable_bridge(child); 2168} 2169 2170static void pnv_pci_enable_bridges(void) 2171{ 2172 struct pci_controller *hose; 2173 2174 list_for_each_entry(hose, &hose_list, list_node) 2175 pnv_pci_enable_bridge(hose->bus); 2176} 2177 2178static void pnv_pci_ioda_fixup(void) 2179{ 2180 pnv_pci_ioda_create_dbgfs(); 2181 2182 pnv_pci_enable_bridges(); 2183 2184#ifdef CONFIG_EEH 2185 pnv_eeh_post_init(); 2186#endif 2187} 2188 2189/* 2190 * Returns the alignment for I/O or memory windows for P2P 2191 * bridges. That actually depends on how PEs are segmented. 2192 * For now, we return I/O or M32 segment size for PE sensitive 2193 * P2P bridges. Otherwise, the default values (4KiB for I/O, 2194 * 1MiB for memory) will be returned. 2195 * 2196 * The current PCI bus might be put into one PE, which was 2197 * create against the parent PCI bridge. For that case, we 2198 * needn't enlarge the alignment so that we can save some 2199 * resources. 2200 */ 2201static resource_size_t pnv_pci_window_alignment(struct pci_bus *bus, 2202 unsigned long type) 2203{ 2204 struct pnv_phb *phb = pci_bus_to_pnvhb(bus); 2205 int num_pci_bridges = 0; 2206 struct pci_dev *bridge; 2207 2208 bridge = bus->self; 2209 while (bridge) { 2210 if (pci_pcie_type(bridge) == PCI_EXP_TYPE_PCI_BRIDGE) { 2211 num_pci_bridges++; 2212 if (num_pci_bridges >= 2) 2213 return 1; 2214 } 2215 2216 bridge = bridge->bus->self; 2217 } 2218 2219 /* 2220 * We fall back to M32 if M64 isn't supported. We enforce the M64 2221 * alignment for any 64-bit resource, PCIe doesn't care and 2222 * bridges only do 64-bit prefetchable anyway. 2223 */ 2224 if (phb->ioda.m64_segsize && pnv_pci_is_m64_flags(type)) 2225 return phb->ioda.m64_segsize; 2226 if (type & IORESOURCE_MEM) 2227 return phb->ioda.m32_segsize; 2228 2229 return phb->ioda.io_segsize; 2230} 2231 2232/* 2233 * We are updating root port or the upstream port of the 2234 * bridge behind the root port with PHB's windows in order 2235 * to accommodate the changes on required resources during 2236 * PCI (slot) hotplug, which is connected to either root 2237 * port or the downstream ports of PCIe switch behind the 2238 * root port. 2239 */ 2240static void pnv_pci_fixup_bridge_resources(struct pci_bus *bus, 2241 unsigned long type) 2242{ 2243 struct pci_controller *hose = pci_bus_to_host(bus); 2244 struct pnv_phb *phb = hose->private_data; 2245 struct pci_dev *bridge = bus->self; 2246 struct resource *r, *w; 2247 bool msi_region = false; 2248 int i; 2249 2250 /* Check if we need apply fixup to the bridge's windows */ 2251 if (!pci_is_root_bus(bridge->bus) && 2252 !pci_is_root_bus(bridge->bus->self->bus)) 2253 return; 2254 2255 /* Fixup the resources */ 2256 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) { 2257 r = &bridge->resource[PCI_BRIDGE_RESOURCES + i]; 2258 if (!r->flags || !r->parent) 2259 continue; 2260 2261 w = NULL; 2262 if (r->flags & type & IORESOURCE_IO) 2263 w = &hose->io_resource; 2264 else if (pnv_pci_is_m64(phb, r) && 2265 (type & IORESOURCE_PREFETCH) && 2266 phb->ioda.m64_segsize) 2267 w = &hose->mem_resources[1]; 2268 else if (r->flags & type & IORESOURCE_MEM) { 2269 w = &hose->mem_resources[0]; 2270 msi_region = true; 2271 } 2272 2273 r->start = w->start; 2274 r->end = w->end; 2275 2276 /* The 64KB 32-bits MSI region shouldn't be included in 2277 * the 32-bits bridge window. Otherwise, we can see strange 2278 * issues. One of them is EEH error observed on Garrison. 2279 * 2280 * Exclude top 1MB region which is the minimal alignment of 2281 * 32-bits bridge window. 2282 */ 2283 if (msi_region) { 2284 r->end += 0x10000; 2285 r->end -= 0x100000; 2286 } 2287 } 2288} 2289 2290static void pnv_pci_configure_bus(struct pci_bus *bus) 2291{ 2292 struct pci_dev *bridge = bus->self; 2293 struct pnv_ioda_pe *pe; 2294 bool all = (bridge && pci_pcie_type(bridge) == PCI_EXP_TYPE_PCI_BRIDGE); 2295 2296 dev_info(&bus->dev, "Configuring PE for bus\n"); 2297 2298 /* Don't assign PE to PCI bus, which doesn't have subordinate devices */ 2299 if (WARN_ON(list_empty(&bus->devices))) 2300 return; 2301 2302 /* Reserve PEs according to used M64 resources */ 2303 pnv_ioda_reserve_m64_pe(bus, NULL, all); 2304 2305 /* 2306 * Assign PE. We might run here because of partial hotplug. 2307 * For the case, we just pick up the existing PE and should 2308 * not allocate resources again. 2309 */ 2310 pe = pnv_ioda_setup_bus_PE(bus, all); 2311 if (!pe) 2312 return; 2313 2314 pnv_ioda_setup_pe_seg(pe); 2315} 2316 2317static resource_size_t pnv_pci_default_alignment(void) 2318{ 2319 return PAGE_SIZE; 2320} 2321 2322/* Prevent enabling devices for which we couldn't properly 2323 * assign a PE 2324 */ 2325static bool pnv_pci_enable_device_hook(struct pci_dev *dev) 2326{ 2327 struct pci_dn *pdn; 2328 2329 pdn = pci_get_pdn(dev); 2330 if (!pdn || pdn->pe_number == IODA_INVALID_PE) { 2331 pci_err(dev, "pci_enable_device() blocked, no PE assigned.\n"); 2332 return false; 2333 } 2334 2335 return true; 2336} 2337 2338static bool pnv_ocapi_enable_device_hook(struct pci_dev *dev) 2339{ 2340 struct pci_dn *pdn; 2341 struct pnv_ioda_pe *pe; 2342 2343 pdn = pci_get_pdn(dev); 2344 if (!pdn) 2345 return false; 2346 2347 if (pdn->pe_number == IODA_INVALID_PE) { 2348 pe = pnv_ioda_setup_dev_PE(dev); 2349 if (!pe) 2350 return false; 2351 } 2352 return true; 2353} 2354 2355void pnv_pci_ioda2_release_pe_dma(struct pnv_ioda_pe *pe) 2356{ 2357 struct iommu_table *tbl = pe->table_group.tables[0]; 2358 int64_t rc; 2359 2360 if (!pe->dma_setup_done) 2361 return; 2362 2363 rc = pnv_pci_ioda2_unset_window(&pe->table_group, 0); 2364 if (rc) 2365 pe_warn(pe, "OPAL error %lld release DMA window\n", rc); 2366 2367 pnv_pci_ioda2_set_bypass(pe, false); 2368 if (pe->table_group.group) { 2369 iommu_group_put(pe->table_group.group); 2370 WARN_ON(pe->table_group.group); 2371 } 2372 2373 iommu_tce_table_put(tbl); 2374} 2375 2376static void pnv_ioda_free_pe_seg(struct pnv_ioda_pe *pe, 2377 unsigned short win, 2378 unsigned int *map) 2379{ 2380 struct pnv_phb *phb = pe->phb; 2381 int idx; 2382 int64_t rc; 2383 2384 for (idx = 0; idx < phb->ioda.total_pe_num; idx++) { 2385 if (map[idx] != pe->pe_number) 2386 continue; 2387 2388 rc = opal_pci_map_pe_mmio_window(phb->opal_id, 2389 phb->ioda.reserved_pe_idx, win, 0, idx); 2390 2391 if (rc != OPAL_SUCCESS) 2392 pe_warn(pe, "Error %lld unmapping (%d) segment#%d\n", 2393 rc, win, idx); 2394 2395 map[idx] = IODA_INVALID_PE; 2396 } 2397} 2398 2399static void pnv_ioda_release_pe_seg(struct pnv_ioda_pe *pe) 2400{ 2401 struct pnv_phb *phb = pe->phb; 2402 2403 if (phb->type == PNV_PHB_IODA2) { 2404 pnv_ioda_free_pe_seg(pe, OPAL_M32_WINDOW_TYPE, 2405 phb->ioda.m32_segmap); 2406 } 2407} 2408 2409static void pnv_ioda_release_pe(struct pnv_ioda_pe *pe) 2410{ 2411 struct pnv_phb *phb = pe->phb; 2412 struct pnv_ioda_pe *slave, *tmp; 2413 2414 pe_info(pe, "Releasing PE\n"); 2415 2416 mutex_lock(&phb->ioda.pe_list_mutex); 2417 list_del(&pe->list); 2418 mutex_unlock(&phb->ioda.pe_list_mutex); 2419 2420 switch (phb->type) { 2421 case PNV_PHB_IODA2: 2422 pnv_pci_ioda2_release_pe_dma(pe); 2423 break; 2424 case PNV_PHB_NPU_OCAPI: 2425 break; 2426 default: 2427 WARN_ON(1); 2428 } 2429 2430 pnv_ioda_release_pe_seg(pe); 2431 pnv_ioda_deconfigure_pe(pe->phb, pe); 2432 2433 /* Release slave PEs in the compound PE */ 2434 if (pe->flags & PNV_IODA_PE_MASTER) { 2435 list_for_each_entry_safe(slave, tmp, &pe->slaves, list) { 2436 list_del(&slave->list); 2437 pnv_ioda_free_pe(slave); 2438 } 2439 } 2440 2441 /* 2442 * The PE for root bus can be removed because of hotplug in EEH 2443 * recovery for fenced PHB error. We need to mark the PE dead so 2444 * that it can be populated again in PCI hot add path. The PE 2445 * shouldn't be destroyed as it's the global reserved resource. 2446 */ 2447 if (phb->ioda.root_pe_idx == pe->pe_number) 2448 return; 2449 2450 pnv_ioda_free_pe(pe); 2451} 2452 2453static void pnv_pci_release_device(struct pci_dev *pdev) 2454{ 2455 struct pnv_phb *phb = pci_bus_to_pnvhb(pdev->bus); 2456 struct pci_dn *pdn = pci_get_pdn(pdev); 2457 struct pnv_ioda_pe *pe; 2458 2459 /* The VF PE state is torn down when sriov_disable() is called */ 2460 if (pdev->is_virtfn) 2461 return; 2462 2463 if (!pdn || pdn->pe_number == IODA_INVALID_PE) 2464 return; 2465 2466#ifdef CONFIG_PCI_IOV 2467 /* 2468 * FIXME: Try move this to sriov_disable(). It's here since we allocate 2469 * the iov state at probe time since we need to fiddle with the IOV 2470 * resources. 2471 */ 2472 if (pdev->is_physfn) 2473 kfree(pdev->dev.archdata.iov_data); 2474#endif 2475 2476 /* 2477 * PCI hotplug can happen as part of EEH error recovery. The @pdn 2478 * isn't removed and added afterwards in this scenario. We should 2479 * set the PE number in @pdn to an invalid one. Otherwise, the PE's 2480 * device count is decreased on removing devices while failing to 2481 * be increased on adding devices. It leads to unbalanced PE's device 2482 * count and eventually make normal PCI hotplug path broken. 2483 */ 2484 pe = &phb->ioda.pe_array[pdn->pe_number]; 2485 pdn->pe_number = IODA_INVALID_PE; 2486 2487 WARN_ON(--pe->device_count < 0); 2488 if (pe->device_count == 0) 2489 pnv_ioda_release_pe(pe); 2490} 2491 2492static void pnv_pci_ioda_shutdown(struct pci_controller *hose) 2493{ 2494 struct pnv_phb *phb = hose->private_data; 2495 2496 opal_pci_reset(phb->opal_id, OPAL_RESET_PCI_IODA_TABLE, 2497 OPAL_ASSERT_RESET); 2498} 2499 2500static void pnv_pci_ioda_dma_bus_setup(struct pci_bus *bus) 2501{ 2502 struct pnv_phb *phb = pci_bus_to_pnvhb(bus); 2503 struct pnv_ioda_pe *pe; 2504 2505 list_for_each_entry(pe, &phb->ioda.pe_list, list) { 2506 if (!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL))) 2507 continue; 2508 2509 if (!pe->pbus) 2510 continue; 2511 2512 if (bus->number == ((pe->rid >> 8) & 0xFF)) { 2513 pe->pbus = bus; 2514 break; 2515 } 2516 } 2517} 2518 2519#ifdef CONFIG_IOMMU_API 2520static struct iommu_group *pnv_pci_device_group(struct pci_controller *hose, 2521 struct pci_dev *pdev) 2522{ 2523 struct pnv_phb *phb = hose->private_data; 2524 struct pnv_ioda_pe *pe; 2525 2526 if (WARN_ON(!phb)) 2527 return ERR_PTR(-ENODEV); 2528 2529 pe = pnv_pci_bdfn_to_pe(phb, pci_dev_id(pdev)); 2530 if (!pe) 2531 return ERR_PTR(-ENODEV); 2532 2533 if (!pe->table_group.group) 2534 return ERR_PTR(-ENODEV); 2535 2536 return iommu_group_ref_get(pe->table_group.group); 2537} 2538#endif 2539 2540static const struct pci_controller_ops pnv_pci_ioda_controller_ops = { 2541 .dma_dev_setup = pnv_pci_ioda_dma_dev_setup, 2542 .dma_bus_setup = pnv_pci_ioda_dma_bus_setup, 2543 .iommu_bypass_supported = pnv_pci_ioda_iommu_bypass_supported, 2544 .enable_device_hook = pnv_pci_enable_device_hook, 2545 .release_device = pnv_pci_release_device, 2546 .window_alignment = pnv_pci_window_alignment, 2547 .setup_bridge = pnv_pci_fixup_bridge_resources, 2548 .reset_secondary_bus = pnv_pci_reset_secondary_bus, 2549 .shutdown = pnv_pci_ioda_shutdown, 2550#ifdef CONFIG_IOMMU_API 2551 .device_group = pnv_pci_device_group, 2552#endif 2553}; 2554 2555static const struct pci_controller_ops pnv_npu_ocapi_ioda_controller_ops = { 2556 .enable_device_hook = pnv_ocapi_enable_device_hook, 2557 .release_device = pnv_pci_release_device, 2558 .window_alignment = pnv_pci_window_alignment, 2559 .reset_secondary_bus = pnv_pci_reset_secondary_bus, 2560 .shutdown = pnv_pci_ioda_shutdown, 2561}; 2562 2563static void __init pnv_pci_init_ioda_phb(struct device_node *np, 2564 u64 hub_id, int ioda_type) 2565{ 2566 struct pci_controller *hose; 2567 struct pnv_phb *phb; 2568 unsigned long size, m64map_off, m32map_off, pemap_off; 2569 struct pnv_ioda_pe *root_pe; 2570 struct resource r; 2571 const __be64 *prop64; 2572 const __be32 *prop32; 2573 int len; 2574 unsigned int segno; 2575 u64 phb_id; 2576 void *aux; 2577 long rc; 2578 2579 if (!of_device_is_available(np)) 2580 return; 2581 2582 pr_info("Initializing %s PHB (%pOF)\n", pnv_phb_names[ioda_type], np); 2583 2584 prop64 = of_get_property(np, "ibm,opal-phbid", NULL); 2585 if (!prop64) { 2586 pr_err(" Missing \"ibm,opal-phbid\" property !\n"); 2587 return; 2588 } 2589 phb_id = be64_to_cpup(prop64); 2590 pr_debug(" PHB-ID : 0x%016llx\n", phb_id); 2591 2592 phb = kzalloc(sizeof(*phb), GFP_KERNEL); 2593 if (!phb) 2594 panic("%s: Failed to allocate %zu bytes\n", __func__, 2595 sizeof(*phb)); 2596 2597 /* Allocate PCI controller */ 2598 phb->hose = hose = pcibios_alloc_controller(np); 2599 if (!phb->hose) { 2600 pr_err(" Can't allocate PCI controller for %pOF\n", 2601 np); 2602 memblock_free(phb, sizeof(struct pnv_phb)); 2603 return; 2604 } 2605 2606 spin_lock_init(&phb->lock); 2607 prop32 = of_get_property(np, "bus-range", &len); 2608 if (prop32 && len == 8) { 2609 hose->first_busno = be32_to_cpu(prop32[0]); 2610 hose->last_busno = be32_to_cpu(prop32[1]); 2611 } else { 2612 pr_warn(" Broken <bus-range> on %pOF\n", np); 2613 hose->first_busno = 0; 2614 hose->last_busno = 0xff; 2615 } 2616 hose->private_data = phb; 2617 phb->hub_id = hub_id; 2618 phb->opal_id = phb_id; 2619 phb->type = ioda_type; 2620 mutex_init(&phb->ioda.pe_alloc_mutex); 2621 2622 /* Detect specific models for error handling */ 2623 if (of_device_is_compatible(np, "ibm,p7ioc-pciex")) 2624 phb->model = PNV_PHB_MODEL_P7IOC; 2625 else if (of_device_is_compatible(np, "ibm,power8-pciex")) 2626 phb->model = PNV_PHB_MODEL_PHB3; 2627 else 2628 phb->model = PNV_PHB_MODEL_UNKNOWN; 2629 2630 /* Initialize diagnostic data buffer */ 2631 prop32 = of_get_property(np, "ibm,phb-diag-data-size", NULL); 2632 if (prop32) 2633 phb->diag_data_size = be32_to_cpup(prop32); 2634 else 2635 phb->diag_data_size = PNV_PCI_DIAG_BUF_SIZE; 2636 2637 phb->diag_data = kzalloc(phb->diag_data_size, GFP_KERNEL); 2638 if (!phb->diag_data) 2639 panic("%s: Failed to allocate %u bytes\n", __func__, 2640 phb->diag_data_size); 2641 2642 /* Parse 32-bit and IO ranges (if any) */ 2643 pci_process_bridge_OF_ranges(hose, np, !hose->global_number); 2644 2645 /* Get registers */ 2646 if (!of_address_to_resource(np, 0, &r)) { 2647 phb->regs_phys = r.start; 2648 phb->regs = ioremap(r.start, resource_size(&r)); 2649 if (phb->regs == NULL) 2650 pr_err(" Failed to map registers !\n"); 2651 } 2652 2653 /* Initialize more IODA stuff */ 2654 phb->ioda.total_pe_num = 1; 2655 prop32 = of_get_property(np, "ibm,opal-num-pes", NULL); 2656 if (prop32) 2657 phb->ioda.total_pe_num = be32_to_cpup(prop32); 2658 prop32 = of_get_property(np, "ibm,opal-reserved-pe", NULL); 2659 if (prop32) 2660 phb->ioda.reserved_pe_idx = be32_to_cpup(prop32); 2661 2662 /* Invalidate RID to PE# mapping */ 2663 for (segno = 0; segno < ARRAY_SIZE(phb->ioda.pe_rmap); segno++) 2664 phb->ioda.pe_rmap[segno] = IODA_INVALID_PE; 2665 2666 /* Parse 64-bit MMIO range */ 2667 pnv_ioda_parse_m64_window(phb); 2668 2669 phb->ioda.m32_size = resource_size(&hose->mem_resources[0]); 2670 /* FW Has already off top 64k of M32 space (MSI space) */ 2671 phb->ioda.m32_size += 0x10000; 2672 2673 phb->ioda.m32_segsize = phb->ioda.m32_size / phb->ioda.total_pe_num; 2674 phb->ioda.m32_pci_base = hose->mem_resources[0].start - hose->mem_offset[0]; 2675 phb->ioda.io_size = hose->pci_io_size; 2676 phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe_num; 2677 phb->ioda.io_pci_base = 0; /* XXX calculate this ? */ 2678 2679 /* Allocate aux data & arrays. We don't have IO ports on PHB3 */ 2680 size = ALIGN(max_t(unsigned, phb->ioda.total_pe_num, 8) / 8, 2681 sizeof(unsigned long)); 2682 m64map_off = size; 2683 size += phb->ioda.total_pe_num * sizeof(phb->ioda.m64_segmap[0]); 2684 m32map_off = size; 2685 size += phb->ioda.total_pe_num * sizeof(phb->ioda.m32_segmap[0]); 2686 pemap_off = size; 2687 size += phb->ioda.total_pe_num * sizeof(struct pnv_ioda_pe); 2688 aux = kzalloc(size, GFP_KERNEL); 2689 if (!aux) 2690 panic("%s: Failed to allocate %lu bytes\n", __func__, size); 2691 2692 phb->ioda.pe_alloc = aux; 2693 phb->ioda.m64_segmap = aux + m64map_off; 2694 phb->ioda.m32_segmap = aux + m32map_off; 2695 for (segno = 0; segno < phb->ioda.total_pe_num; segno++) { 2696 phb->ioda.m64_segmap[segno] = IODA_INVALID_PE; 2697 phb->ioda.m32_segmap[segno] = IODA_INVALID_PE; 2698 } 2699 phb->ioda.pe_array = aux + pemap_off; 2700 2701 /* 2702 * Choose PE number for root bus, which shouldn't have 2703 * M64 resources consumed by its child devices. To pick 2704 * the PE number adjacent to the reserved one if possible. 2705 */ 2706 pnv_ioda_reserve_pe(phb, phb->ioda.reserved_pe_idx); 2707 if (phb->ioda.reserved_pe_idx == 0) { 2708 phb->ioda.root_pe_idx = 1; 2709 pnv_ioda_reserve_pe(phb, phb->ioda.root_pe_idx); 2710 } else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1)) { 2711 phb->ioda.root_pe_idx = phb->ioda.reserved_pe_idx - 1; 2712 pnv_ioda_reserve_pe(phb, phb->ioda.root_pe_idx); 2713 } else { 2714 /* otherwise just allocate one */ 2715 root_pe = pnv_ioda_alloc_pe(phb, 1); 2716 phb->ioda.root_pe_idx = root_pe->pe_number; 2717 } 2718 2719 INIT_LIST_HEAD(&phb->ioda.pe_list); 2720 mutex_init(&phb->ioda.pe_list_mutex); 2721 2722#if 0 /* We should really do that ... */ 2723 rc = opal_pci_set_phb_mem_window(opal->phb_id, 2724 window_type, 2725 window_num, 2726 starting_real_address, 2727 starting_pci_address, 2728 segment_size); 2729#endif 2730 2731 pr_info(" %03d (%03d) PE's M32: 0x%x [segment=0x%x]\n", 2732 phb->ioda.total_pe_num, phb->ioda.reserved_pe_idx, 2733 phb->ioda.m32_size, phb->ioda.m32_segsize); 2734 if (phb->ioda.m64_size) 2735 pr_info(" M64: 0x%lx [segment=0x%lx]\n", 2736 phb->ioda.m64_size, phb->ioda.m64_segsize); 2737 if (phb->ioda.io_size) 2738 pr_info(" IO: 0x%x [segment=0x%x]\n", 2739 phb->ioda.io_size, phb->ioda.io_segsize); 2740 2741 2742 phb->hose->ops = &pnv_pci_ops; 2743 phb->get_pe_state = pnv_ioda_get_pe_state; 2744 phb->freeze_pe = pnv_ioda_freeze_pe; 2745 phb->unfreeze_pe = pnv_ioda_unfreeze_pe; 2746 2747 /* Setup MSI support */ 2748 pnv_pci_init_ioda_msis(phb); 2749 2750 /* 2751 * We pass the PCI probe flag PCI_REASSIGN_ALL_RSRC here 2752 * to let the PCI core do resource assignment. It's supposed 2753 * that the PCI core will do correct I/O and MMIO alignment 2754 * for the P2P bridge bars so that each PCI bus (excluding 2755 * the child P2P bridges) can form individual PE. 2756 */ 2757 ppc_md.pcibios_fixup = pnv_pci_ioda_fixup; 2758 2759 switch (phb->type) { 2760 case PNV_PHB_NPU_OCAPI: 2761 hose->controller_ops = pnv_npu_ocapi_ioda_controller_ops; 2762 break; 2763 default: 2764 hose->controller_ops = pnv_pci_ioda_controller_ops; 2765 } 2766 2767 ppc_md.pcibios_default_alignment = pnv_pci_default_alignment; 2768 2769#ifdef CONFIG_PCI_IOV 2770 ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov; 2771 ppc_md.pcibios_iov_resource_alignment = pnv_pci_iov_resource_alignment; 2772 ppc_md.pcibios_sriov_enable = pnv_pcibios_sriov_enable; 2773 ppc_md.pcibios_sriov_disable = pnv_pcibios_sriov_disable; 2774#endif 2775 2776 pci_add_flags(PCI_REASSIGN_ALL_RSRC); 2777 2778 /* Reset IODA tables to a clean state */ 2779 rc = opal_pci_reset(phb_id, OPAL_RESET_PCI_IODA_TABLE, OPAL_ASSERT_RESET); 2780 if (rc) 2781 pr_warn(" OPAL Error %ld performing IODA table reset !\n", rc); 2782 2783 /* 2784 * If we're running in kdump kernel, the previous kernel never 2785 * shutdown PCI devices correctly. We already got IODA table 2786 * cleaned out. So we have to issue PHB reset to stop all PCI 2787 * transactions from previous kernel. The ppc_pci_reset_phbs 2788 * kernel parameter will force this reset too. Additionally, 2789 * if the IODA reset above failed then use a bigger hammer. 2790 * This can happen if we get a PHB fatal error in very early 2791 * boot. 2792 */ 2793 if (is_kdump_kernel() || pci_reset_phbs || rc) { 2794 pr_info(" Issue PHB reset ...\n"); 2795 pnv_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL); 2796 pnv_eeh_phb_reset(hose, EEH_RESET_DEACTIVATE); 2797 } 2798 2799 /* Remove M64 resource if we can't configure it successfully */ 2800 if (!phb->init_m64 || phb->init_m64(phb)) 2801 hose->mem_resources[1].flags = 0; 2802 2803 /* create pci_dn's for DT nodes under this PHB */ 2804 pci_devs_phb_init_dynamic(hose); 2805} 2806 2807void __init pnv_pci_init_ioda2_phb(struct device_node *np) 2808{ 2809 pnv_pci_init_ioda_phb(np, 0, PNV_PHB_IODA2); 2810} 2811 2812void __init pnv_pci_init_npu2_opencapi_phb(struct device_node *np) 2813{ 2814 pnv_pci_init_ioda_phb(np, 0, PNV_PHB_NPU_OCAPI); 2815} 2816 2817static void pnv_npu2_opencapi_cfg_size_fixup(struct pci_dev *dev) 2818{ 2819 struct pnv_phb *phb = pci_bus_to_pnvhb(dev->bus); 2820 2821 if (!machine_is(powernv)) 2822 return; 2823 2824 if (phb->type == PNV_PHB_NPU_OCAPI) 2825 dev->cfg_size = PCI_CFG_SPACE_EXP_SIZE; 2826} 2827DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, pnv_npu2_opencapi_cfg_size_fixup); 2828